update hash

dectmngr2/Makefile

@@ -42,7 +42,6 @@ define Package/dectmngr2/install
 	$(INSTALL_DIR) $(1)/etc/dect/
 	$(INSTALL_DIR) $(1)/etc/config/
 	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
@@ -50,7 +49,6 @@ define Package/dectmngr2/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
 	$(CP) ./files/dect.config $(1)/etc/config/dect
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 endef
 
 $(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-
-# Workaround for product DG400 which has an
-# incorrect value in nvram from factory.
-
-if [ -e "/proc/nvram/BoardId" ]; then
-	boardid=$(cat /proc/nvram/BoardId)
-	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
-
-	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
-		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
-
-		db -q batch <<-EOT
-			set hw.board.hasDect=1
-			commit hw.board
-		EOT
-	fi
-fi
-
-
-exit 0
-

dslmngr/Makefile

@@ -1,78 +0,0 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dslmngr
-PKG_VERSION:=1.0.0
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=be5b0d0c0a1c2abd335aaf19f01f63284d8cc285
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-define Package/dslmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +easy-soc-libs
-endef
-
-define Package/dslmngr/description
- This package can be used to configure and provide status about
- the XDSL subsystem through UBUS.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Build/Compile
-	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
-endef
-
-define Package/dslmngr/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,dslmngr))

easy-qos/Makefile

@@ -1,37 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-qos
-PKG_VERSION:=1.0
-PKG_RELEASE:=0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-qos
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Easy QoS
-endef
-
-define Package/easy-qos/description
-	This package contains Easy QoS utitie
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/easy-qos/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
-	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
-endef
-
-$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -1 +0,0 @@
-/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -1,140 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-log() {
-	echo "${@}"|logger -t easy_qos.ebtable -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	while [ -n "${rule}" ]; do
-		exec_log ebtables -t broute -D BROUTING ${rule}
-		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	done
-}
-
-create_rule() {
-	local protocol=$1; shift
-	local mac=$1; shift
-	local mark="0x$1"; shift
-	local forward_port=$1;
-	local cmd="";
-	local protocol_number
-
-	cmd="-j mark --mark-or ${mark}";
-	if [ -n "${forward_port}" ]; then
-		cmd="--ip-destination-port ${forward_port} ${cmd}";
-	fi
-	
-	case "${protocol}" in
-		"tcp")
-			protocol_number=6;;
-		"udp")
-			protocol_number=17;;
-		"dccp")
-			protocol_number=33;;
-		"sctp")
-			protocol_number=132;;
-		*)
-			log "Protocol ${protocol} not supported in ebtables"
-			return;;
-	esac
-			
-	cmd="--ip-proto ${protocol_number} $cmd"
-	cmd="-p ip $cmd"
-
-	cmd="-s ${mac} $cmd"
-	exec_log ebtables -t broute -A BROUTING ${cmd}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num protocol
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	protocol=$(echo ${proto}|tr [A-Z] [a-z])
-	prio_num=$(get_priority ${priority})
-	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
-		for p in ${port}; do
-			if [ "${protocol}" == "none" ]; then
-				create_rule tcp ${macaddr} ${prio_num} ${p}
-				create_rule udp ${macaddr} ${prio_num} ${p}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
-			fi
-		done
-		# Create rule for all ports if port is not mentioned in uci
-		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" ]; then
-				create_rule tcp ${macaddr} ${prio_num}
-				create_rule udp ${macaddr} ${prio_num}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	# Do not apply rules if ebtables is not present in system
-	[ -x /usr/sbin/ebtables ] || return;
-
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	reload_service
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -1,186 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /usr/share/libubox/jshn.sh
-
-START=99
-USE_PROCD=1
-
-CLIENT_LIST="/tmp/easy_qos_client.list"
-
-log() {
-	echo "${@}"|logger -t easy_qos -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-#	json_add_array "clients"
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}"
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
-	done
-}
-
-check_and_create() {
-	iptables -t mangle -C OUTPUT ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A OUTPUT ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark="0x$1/0x$1"; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j MARK --set-xmark ${mark}";
-	if [ -n "${ports}" ]; then
-		cmd="--match multiport --dports ${ports} ${cmd}";
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd} 
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num ip port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	ip=$(get_ipaddress ${macaddr})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" ]; then
-			create_rule tcp ${ip} ${prio_num} ${port_list}
-			create_rule udp ${ip} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${ip} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	clear_existing_rules
-	map_client_entries
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	reload_service
-	echo "Easy QoS installed">/dev/console;
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -1,10 +0,0 @@
-# Add firewall include
-uci -q batch <<-EOT
-        delete firewall.easyqos
-        set firewall.easyqos=include
-        set firewall.easyqos.path=/etc/firewall.easyqos
-        set firewall.easyqos.reload=1
-	uci del_list firewall.easyqos._access_w="root"
-	uci add_list firewall.easyqos._access_w="root"
-        commit firewall
-EOT

easy-soc-libs/Config.in

@@ -15,9 +15,5 @@ config LIBDSL_DEBUG
 	bool "Enable xdsl debugging"
 	default n
 
-config LIBDSL_TEST
-	depends on PACKAGE_libdsl
-	bool "Libdsl test program"
-	default n
 endmenu
 endif

easy-soc-libs/Makefile

@@ -8,15 +8,12 @@ PKG_NAME:=easy-soc-libs
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=6bd703870262eca9ccbd8c4937c41fe842828ae3
+PKG_SOURCE_VERSION:=8989476ac5df494064ed94a52634be5c61fff037
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-endif
 
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
@@ -37,49 +34,43 @@ endef
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-  DEPENDS+=+TARGET_intel_mips:libnl +TARGET_intel_mips:libnl-route
+endef
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= XDSL library (libdsl)
 endef
 
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+TARGET_iopsys_ramips:swconfig
+  DEPENDS:=+TARGET_iopsys_ramips:swconfig
 endef
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
   KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
   TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
 else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
   TARGET_PLATFORM=MARVELL
   TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-  TARGET_CFLAGS +=-DIOPSYS_INTEL
+else ifeq ($(CONFIG_TARGET_lantiq_xrx500),y)
+  TARGET_PLATFORM=LANTIQ
+  TARGET_CFLAGS +=-DIOPSYS_LANTIQ
 else
-  $(info Unexpected CONFIG_TARGET)
+  $(info (UNEXPECTED CONFIG TARGET))
 endif
 
-export TARGET_PLATFORM
-
 ifdef CONFIG_IOP_LLA_LIBS_DEBUG
   TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
 endif
 
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
-  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi
-endef
-
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
 	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
@@ -87,22 +78,15 @@ subdirs := \
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
 	-I$(STAGING_DIR)/usr/include/libnl3
 
 MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	CFLAGS="$(TARGET_CFLAGS)" \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
 	subdirs="$(subdirs)"
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
-endef
-endif
-
 define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
@@ -124,12 +108,6 @@ define Build/InstallDev/libethernet
 	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
 endef
 
-define Build/Compile
-	$(call Build/Compile/Default)
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
-endif
-endef
 
 define Build/InstallDev
 	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
@@ -147,11 +125,7 @@ endef
 
 define Package/libdsl/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/bin
 	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
-endif
 endef
 
 $(eval $(call BuildPackage,libwifi))

endptmngr/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
 PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=44e2472e8c08bef01fab27e8e908d5672f7af136
+PKG_SOURCE_VERSION:=a78fe95d5c5a0a320f3b62b9d2faafd07b56e3a7
 
 
 ifeq ($(CONFIG_ENDPT_OPEN),y)

eventlog/Makefile

@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=eventlog
+PKG_VERSION:=0.2.9
+PKG_RELEASE:=2
+
+PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
+PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
+PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
+
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libeventlog
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=A new API to format and send structured log messages.
+endef
+
+define Package/eventlog/description
+  A new API to format and send structured log messages. It supports multiple message
+  representations (plain, XML attributes and XML tags) and multiple output methods
+  (local syslogd).
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
+endef
+
+define Package/libeventlog/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libeventlog))

gryphon-led-module/Makefile

@@ -1,62 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=gryphon-led-kernel-module
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/$(PKG_NAME)
-  SUBMENU:=LED modules
-  TITLE:=LED driver for Gryphon
-  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
-  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
-  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  PKG_LICENSE:=Genexis
-  PKG_LICENSE_URL:=
-endef
-
-define KernelPackage/$(PKG_NAME)/description
-  This package contains the LED driver for Gryphon devices.
-endef
-
-EXTRA_KCONFIG:= CONFIG_RGB_LED=m
-
-MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) src/* $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
-		modules
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-endef
-
-$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -1,26 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-MODULE_NAME  = gryphon-led-kernel-module
-
-obj-m  := $(MODULE_NAME).o
-
-GENEXIS_FILES= \
-	main.o \
-	sk9822.o \
-	sk9822_bitbang.o
-
-$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -1,253 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#define DEBUG 1
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/printk.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/version.h>
-
-#include "sk9822.h"
-
-#define DRIVER_NAME			"canyon_led"
-#define DRIVER_AUTHOR		"Genexis B.V."
-#define DRIVER_DESC			"Canyon LED driver for SK9822"
-#define DRIVER_VERSION	"1"
-
-/**
- * sysfs interfaces
- */
-
-static ssize_t get_led_color(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	/* [ln] todo: dummy implementation */
-	int len;
-
-	len = sprintf(buf, "%d\n", 123);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-	}
-
-	return len;
-}
-
-/**
- * @brief Set complete LED strip to a specific color
- * @retval count number of bytes written
- * @retval -EMSGSIZE if the message is too big
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_color(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	size_t buflen = count;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	/* strip newline */
-	if ((count > 0) && (buf[count-1] == '\n')) {
-		buflen--;
-	}
-
-	if (buflen != 6) { // RRGGBB\0
-		return -EMSGSIZE;
-	}
-
-	// Update the LED array here
-	ret = sk9822_set_color_str(sk9822, buf);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to set led color\n");
-		return -EIO;
-	}
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
-
-static struct attribute *sk9822_dev_attrs[] = {
-	 &dev_attr_led_color.attr,
-	 NULL
-};
-
-static struct attribute_group sk9822_dev_attr_group = {
-	.name = "sk9822",
-	.attrs = sk9822_dev_attrs,
-};
-
-/**
- * device prope and removal
- */
-
-static int canyon_led_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct sk9822_leds *leds;
-
-	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
-	if (!leds) {
-		return -ENOMEM;
-	}
-	leds->dev = &pdev->dev;
-	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
-
-	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
-	if (ret < 0) {
-		dev_warn(&pdev->dev, "Could not read led-count property\n");
-		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
-	}
-
-	leds->led_colors = devm_kzalloc(&pdev->dev,
-			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
-	if (!leds->led_colors) {
-		return -ENOMEM;
-	}
-
-
-	platform_set_drvdata(pdev, leds);
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-
-	gpiod_direction_output(leds->clock_gpio, 1);
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		leds->clock_gpio = NULL;
-		return PTR_ERR(leds->clock_gpio);
-	} else {
-		printk(KERN_INFO "Got clock gpio\n");
-		gpiod_set_value(leds->clock_gpio, 0);
-	}
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-
-	gpiod_direction_output(leds->data_gpio, 1);
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		leds->data_gpio = NULL;
-		return PTR_ERR(leds->data_gpio);
-	} else {
-		printk(KERN_INFO "Got data gpio\n");
-		gpiod_set_value(leds->data_gpio, 0);
-	}
-
-	printk(KERN_INFO "Attempt to set filefs stuff\n");
-	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-	if (ret) {
-		dev_err(&pdev->dev, "sysfs creation failed\n");
-		return ret;
-	}
-
-#if 0
-	printk(KERN_INFO "Flash LEDs to verify they work\n");
-	sk9822_set_color_str(leds, "00FF00");
-	sk9822_update(leds);
-	msleep(200);
-#endif
-	sk9822_set_color_str(leds, "000000");
-	sk9822_update(leds);
-
-	printk(KERN_INFO "canyon led successfully probed\n");
-
-	return 0;
-}
-
-static int canyon_led_remove(struct platform_device *pdev)
-{
-	struct sk9822_leds *leds;
-
-	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-
-	leds = platform_get_drvdata(pdev);
-	if (IS_ERR(leds)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -1;
-	}
-
-	if (leds->clock_gpio) {
-		gpiod_put(leds->clock_gpio);
-	}
-
-	if (leds->data_gpio) {
-		gpiod_put(leds->data_gpio);
-	}
-
-	printk(KERN_NOTICE "Bye, bye\n");
-
-	return 0;
-}
-
-/**
- * platform driver metadata
- */
-
-static const struct of_device_id canyon_led_of_ids[] = {
-	{ .compatible = "canyon,led" },
-	{ }
-};
-
-static struct platform_driver canyon_led = {
-	.probe = &canyon_led_probe,
-	.remove = &canyon_led_remove,
-	.driver = {
-		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
-		.of_match_table = canyon_led_of_ids,
-	},
-};
-
-MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
-module_platform_driver(canyon_led);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-#include "sk9822_bitbang.h"
-
-cRGB __hexs_to_rgb(const char *hex)
-{
-	cRGB rgb;
-	int r, g, b;
-
-	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
-	// This needs sanity checking
-	rgb.r = r;
-	rgb.g = g;
-	rgb.b = b;
-	return rgb;
-}
-
-/**
- * @brief update the color over the given device struct to the provided HEX color
- */
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
-{
-	int i;
-	cRGB color = __hexs_to_rgb(hex);
-
-	for (i = 0; i < sk9822->led_count; i++) {
-		sk9822->led_colors[i] = color;
-	}
-
-	return 0;
-}
-
-/**
- * @brief write device struct to the device
- */
-int sk9822_update(struct sk9822_leds *sk9822)
-{
-	uint16_t i;
-	uint16_t led_count = sk9822->led_count;
-
-	// Start Frame
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-
-	for (i = 0; i < led_count; i++) {
-		cRGB *p = &sk9822->led_colors[i];
-		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
-		sk9822_bb_write(sk9822, p->b);
-		sk9822_bb_write(sk9822, p->g);
-		sk9822_bb_write(sk9822, p->r);
-	}
-
-	// End frame
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-
-	return 0;
-}

gryphon-led-module/src/sk9822.h

@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef SK9822_H_
-#define SK9822_H_
-
-#include <linux/types.h>
-
-#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
-#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
-
-typedef struct {
-	uint8_t b;
-	uint8_t g;
-	uint8_t r;
-} cRGB;   // BGR (SK9822 Standard)
-
-struct sk9822_leds {
-	struct device *dev;
-	struct gpio_desc *clock_gpio;
-	struct gpio_desc *data_gpio;
-
-	cRGB *led_colors;
-	uint8_t led_brightness;
-	uint16_t led_count;
-};
-
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
-int sk9822_update(struct sk9822_leds *sk9822);
-
-#endif /* SK9822_H_ */

gryphon-led-module/src/sk9822_bitbang.c

@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-/**
- * @brief Bitbang write operation CLOCK+DATA
- *
- * Assumed state before call: CLOCK- Low, DATA- High
- */
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
-{
-	uint8_t i;
-
-	for (i = 0; i < 8 ; i++) {
-		if (!(c&0x80)) {
-			gpiod_set_value(sk9822->data_gpio, 0); // set data low
-		} else {
-			gpiod_set_value(sk9822->data_gpio, 1); // set data high
-		}
-
-		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
-		c <<= 1;
-		udelay(1); // stretch clock
-		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
-	}
-
-	// State after call: SCK Low, Data high
-}

gryphon-led-module/src/sk9822_bitbang.h

@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _SK9822_BB_H_
-#define _SK9822_BB_H_
-
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
-
-#endif /* _SK9822_BB_H_ */

ice-client/Makefile

@@ -19,14 +19,14 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.3.6
+BASE_PKG_VERSION:=5.2.3
 PKG_RELEASE:=
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=94aab1532fef2caf2d65579614fc413252a517eb
+PKG_SOURCE_VERSION:=795cf8ce3cc19ff8bbb014c8ac456784c187dcc5
 ifeq ($(CONFIG_ICE_OPEN),y)
 TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/

ice-client/files/ice-client.uci_default

@@ -9,8 +9,6 @@ uci -q set passwords.ice=usertype
 uci -q set passwords.ice.password="\$WPAKEY"
 uci -q del_list passwords.ice._access_w=root
 uci -q add_list passwords.ice._access_w=root
-uci -q del_list passwords.ice._access_r=root
-uci -q add_list passwords.ice._access_r=root
 uci -q commit passwords
 
 uci show rpcd | grep username=.*ice.* >/dev/null || {

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-04-05
+PKG_VERSION:=4.0-2018-12-04
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f7e8cee5bcc578cc9bb9307e31d0c057676a377c
+PKG_SOURCE_VERSION:=f9bbd7fb4a122dd523c2f2eaedec932c8483154f
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -51,13 +51,6 @@ define Package/icwmp_xmpp
 	DEPENDS:=+libuci +libubox +libexpat +libstrophe
 endef
 
-define Package/icwmp_udpechoserver
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 udpechoserver feature
-	DEPENDS:=+libuci
-endef
-
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
@@ -210,15 +203,6 @@ define Package/icwmp_xmpp/install
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
 endef
 
-define Package/icwmp_udpechoserver/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
-endef
-
 define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
@@ -254,5 +238,4 @@ $(eval $(call BuildPackage,icwmp-curl))
 $(eval $(call BuildPackage,libdatamodel))
 $(eval $(call BuildPackage,icwmp_stun))
 $(eval $(call BuildPackage,icwmp_xmpp))
-$(eval $(call BuildPackage,icwmp_udpechoserver))
 $(eval $(call BuildPackage,icwmp-zstream))

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -75,11 +75,9 @@ handle_icwmp_restart() {
 		"$previpaddr" = "$curipaddr" -a \
 		"$prevgateway" = "$curgateway" -a \
 		"$prevsubnets" = "$cursubnets" -a \
-		"$prevdnsservers" = "$curdnsservers" \
-	] && {
-		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
-		[ -z "$prevopt43url" ] && exit 0
-	}
+		"$prevdnsservers" = "$curdnsservers" -a \
+		"$prevopt43url" = "$curopt43url" \
+	] && exit 0
 
 	/etc/init.d/icwmpd reload &
 }

ifbt/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys Software Solutions AB
+# Copyright (C) 2013 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=ifbt
 PKG_VERSION:=0.1
 
-PKG_SOURCE_VERSION:=0286812ed8036dea758f904694dc416481fba64d
+PKG_SOURCE_VERSION:=a0572079265293ed99dc4d69fd38528760d29be9
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
 
@@ -18,22 +18,6 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-TARGET_PLATFORM:=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_INTEL
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-TARGET_PLATFORM:=-DIOPSYS_MEDIATEK
-else
-$(info (UNEXPECTED CONFIG TARGET))
-endif
-
-export TARGET_PLATFORM
-
 define Package/ifbt
 	CATEGORY:=Utilities
 	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c

imonitor/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2018 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -15,6 +15,7 @@ PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
 PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 
@@ -23,7 +24,7 @@ include $(INCLUDE_DIR)/cmake.mk
 
 define Package/imonitor
 	CATEGORY:=Utilities
-	TITLE:=iopsysWrt process supervisor
+	TITLE:=Inteno process supervisor
 	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
 endef
 

inbd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2016 iopsys
+# Copyright (C) 2016 Inteno
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=665a72a6bb2b5ea5a17ad6248957fe35525b3782
+PKG_SOURCE_VERSION:=b846ae0ff55284392de2c4d874851b33edd7a6c5
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 
@@ -34,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/inbd
 	CATEGORY:=Utilities
-	TITLE:=iopsys Netlink Bridge Daemon
+	TITLE:=Inteno Netlink Bridge Daemon
 	URL:=
 	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
 endef

iop/Makefile

@@ -20,7 +20,7 @@ define Package/iop
 endef
 
 define Package/iop/description
-	This package contains iopsysWrt SDK utilities
+	This package contains Intenos Iop utilities
 endef
 
 define Build/Compile

iop/configs/config

@@ -3,9 +3,11 @@ CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
+# CONFIG_LOCALMIRROR is not set
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
+CONFIG_PACKAGE_6tunnel=y
 CONFIG_PACKAGE_alsa-lib=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
@@ -15,35 +17,56 @@ CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
 CONFIG_PACKAGE_gdb=m
+CONFIG_PACKAGE_gdbserver=m
 CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_glib2=y
+CONFIG_PACKAGE_ice-client=y
+CONFIG_PACKAGE_ice-client-camerawatch=m
+CONFIG_PACKAGE_ice-client-fileme=m
+CONFIG_PACKAGE_ice-client-gigaset=m
+CONFIG_PACKAGE_ice-client-guest=m
+CONFIG_PACKAGE_ice-client-iperf=m
+CONFIG_PACKAGE_ice-client-logreader=m
+CONFIG_PACKAGE_ice-client-monitor=m
+CONFIG_PACKAGE_ice-client-netrounds=m
+CONFIG_PACKAGE_ice-client-rshell=m
+CONFIG_PACKAGE_ice-client-texec=m
 CONFIG_PACKAGE_icwmp-curl=y
 CONFIG_PACKAGE_ifbt=y
 CONFIG_PACKAGE_imonitor=y
 CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_iopupgrade=y
-CONFIG_PACKAGE_ip-full=y
-CONFIG_PACKAGE_iperf3=y
+CONFIG_PACKAGE_netmode=y
+CONFIG_PACKAGE_iperf-mt=y
 CONFIG_PACKAGE_ipset=y
 CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
-# CONFIG_PACKAGE_iwatchdog is not set
+CONFIG_PACKAGE_iup=y
+CONFIG_PACKAGE_iwatchdog=y
 CONFIG_PACKAGE_juci=y
-CONFIG_PACKAGE_juci-config-backup=y
+CONFIG_PACKAGE_juci-broadcom-iptv=y
+CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
+CONFIG_PACKAGE_juci-wifilife=y
+CONFIG_PACKAGE_juci-wireless=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
 CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
 CONFIG_PACKAGE_juci-dropbear=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
+CONFIG_PACKAGE_juci-ice-client=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
+CONFIG_PACKAGE_juci-config-backup=y
+CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-iup=y
+# CONFIG_PACKAGE_juci-qos is not set
+CONFIG_PACKAGE_juci-voice-client=y
+CONFIG_PACKAGE_juci-macdb=y
 CONFIG_PACKAGE_juci-minidlna=y
 CONFIG_PACKAGE_juci-mod-status=y
 CONFIG_PACKAGE_juci-mod-system=y
-CONFIG_PACKAGE_juci-mwan3=y
 CONFIG_PACKAGE_juci-natalie-dect=y
 CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-device=y
@@ -52,20 +75,24 @@ CONFIG_PACKAGE_juci-network-netifd=y
 CONFIG_PACKAGE_juci-network-port=y
 CONFIG_PACKAGE_juci-openvpn=y
 CONFIG_PACKAGE_juci-owsd=y
+CONFIG_PACKAGE_juci-printer=y
 CONFIG_PACKAGE_juci-realtime-graphs=y
 CONFIG_PACKAGE_juci-samba=y
+CONFIG_PACKAGE_juci-simple-gui=y
 CONFIG_PACKAGE_juci-snmpd=y
 CONFIG_PACKAGE_juci-sysupgrade=y
+CONFIG_PACKAGE_juci-theme-iopsys=y
+CONFIG_PACKAGE_juci-ubus-core=y
 CONFIG_PACKAGE_juci-upnp=y
 CONFIG_PACKAGE_juci-usb=y
-CONFIG_PACKAGE_juci-voice-client=y
-CONFIG_PACKAGE_juci-wifilife=y
-CONFIG_PACKAGE_juci-wireless=y
-CONFIG_PACKAGE_juci-theme-iopsys=y
+CONFIG_PACKAGE_juci-utils=y
+# CONFIG_PACKAGE_kmod-ipt-nathelper is not set
+CONFIG_PACKAGE_kmod-nls-base=y
 CONFIG_PACKAGE_kmod-siit=y
 CONFIG_PACKAGE_libcgroup-daemon=y
 CONFIG_PACKAGE_libcgroup=y
 # CONFIG_PACKAGE_libcgroup-utils is not set
+CONFIG_PACKAGE_ldd=y
 CONFIG_PACKAGE_libdaemon=y
 CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
@@ -73,10 +100,14 @@ CONFIG_PACKAGE_libreadline=y
 CONFIG_PACKAGE_loop-detector=m
 CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
+CONFIG_PACKAGE_mtd-utils=y
+CONFIG_PACKAGE_mtd-utils-deubinize=y
+CONFIG_PACKAGE_mtd-utils-imagewrite=y
+CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
+CONFIG_PACKAGE_mtd-utils-nanddump=y
 CONFIG_PACKAGE_mwan3=y
 CONFIG_PACKAGE_nand-utils=y
 CONFIG_PACKAGE_ndisc6=y
-CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
 CONFIG_PACKAGE_odhcp6c=y
@@ -85,6 +116,7 @@ CONFIG_PACKAGE_openssl-util=y
 CONFIG_OPENSSL_WITH_COMPRESSION=y
 CONFIG_PACKAGE_openvpn-easy-rsa=y
 CONFIG_PACKAGE_openvpn-openssl=y
+# CONFIG_PACKAGE_p910nd is not set
 CONFIG_PACKAGE_peripheral_manager=y
 CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
@@ -123,7 +155,7 @@ CONFIG_PACKAGE_wifimngr=y
 CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_zoneinfo-core=y
 CONFIG_PACKAGE_zoneinfo-europe=y
-CONFIG_TARGET_CUSTOMER="IOPSYS"
+CONFIG_TARGET_CUSTOMER="INT"
 CONFIG_TARGET_ROOTFS_TARGZ=y
 # CONFIG_USE_SSTRIP is not set
 CONFIG_USE_STRIP=y
@@ -155,6 +187,7 @@ CONFIG_BUSYBOX_CONFIG_MICROCOM=y
 # CONFIG_BUSYBOX_CONFIG_RMMOD is not set
 CONFIG_BUSYBOX_CONFIG_STTY=y
 CONFIG_BUSYBOX_CONFIG_TFTP=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
@@ -168,9 +201,11 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
 # CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY is not set
 # CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
@@ -180,6 +215,7 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
 # CONFIG_BUSYBOX_CONFIG_NTPD is not set
+# CONFIG_BUSYBOX_CONFIG_FEATURE_NTPD_SERVER is not set
 CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
@@ -188,6 +224,5 @@ CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_SIGNED_PACKAGES is not set
 CONFIG_KERNEL_DEVTMPFS=y
 CONFIG_KERNEL_DEVTMPFS_MOUNT=y
+CONFIG_PACKAGE_ip-full=y
 # CONFIG_BUSYBOX_CONFIG_IP is not set
-LOCAL_MIRROR="http://download.iopsys.eu/iopsys/mirror/"
-

iop/configs/luci.diff

@@ -0,0 +1,38 @@
+CONFIG_PACKAGE_luci=y
+CONFIG_PACKAGE_luci-mod-admin-core=y
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-app-ddns=y
+CONFIG_PACKAGE_luci-app-dslstats=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-iup=y
+CONFIG_PACKAGE_luci-app-mcpd=y
+CONFIG_PACKAGE_luci-app-minidlna=y
+CONFIG_PACKAGE_luci-app-multiwan=y
+CONFIG_PACKAGE_luci-app-p910nd=y
+CONFIG_PACKAGE_luci-app-parental-control=y
+CONFIG_PACKAGE_luci-app-port-management=y
+CONFIG_PACKAGE_luci-app-power-mgmt=y
+CONFIG_PACKAGE_luci-app-samba=y
+CONFIG_PACKAGE_luci-app-sfp=y
+CONFIG_PACKAGE_luci-app-snmp=y
+CONFIG_PACKAGE_luci-app-speedtest=y
+CONFIG_PACKAGE_luci-app-upnp=y
+CONFIG_PACKAGE_luci-app-voice=y
+CONFIG_PACKAGE_luci-theme-base=y
+CONFIG_PACKAGE_luci-theme-bootstrap=y
+CONFIG_PACKAGE_luci-i18n-english=y
+CONFIG_PACKAGE_luci-proto-3g=y
+CONFIG_PACKAGE_luci-proto-4g=y
+CONFIG_PACKAGE_luci-proto-core=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-sgi-cgi=y
+CONFIG_PACKAGE_luci-lib-core=y
+CONFIG_PACKAGE_luci-lib-core_source=y
+CONFIG_PACKAGE_luci-lib-ipkg=y
+CONFIG_PACKAGE_luci-lib-json=y
+CONFIG_PACKAGE_luci-lib-nixio=y
+CONFIG_PACKAGE_luci-lib-nixio_notls=y
+CONFIG_PACKAGE_luci-lib-sys=y
+CONFIG_PACKAGE_luci-lib-web=y
+

iop/configs/target/intel_mips/config

@@ -0,0 +1,67 @@
+# CONFIG_BUSYBOX_CONFIG_BRCTL is not set
+CONFIG_GCC_VERSION="6.3.0"
+CONFIG_TOOLCHAINOPTS=y
+# CONFIG_BINUTILS_USE_VERSION_2_27 is not set
+CONFIG_BINUTILS_USE_VERSION_2_28=y
+# CONFIG_BINUTILS_USE_VERSION_2_29_1 is not set
+# CONFIG_GCC_USE_GRAPHITE is not set
+# CONFIG_GCC_USE_VERSION_5 is not set
+CONFIG_GCC_USE_VERSION_6=y
+# CONFIG_GCC_USE_VERSION_7 is not set
+# CONFIG_LIBC_USE_GLIBC is not set
+CONFIG_LIBC_USE_MUSL=y
+
+
+# CONFIG_PACKAGE_ppp-mod-pppoa is not set
+
+#################### switch related
+CONFIG_PACKAGE_switch_cli_ugw8=y
+
+#################### ppa related
+CONFIG_PACKAGE_ppacmd=y
+# CONFIG_PACKAGE_kmod-ppa-drv-gre is not set
+# CONFIG_PACKAGE_kmod-ppa-drv-grx500-eth-bond is not set
+# CONFIG_PACKAGE_kmod-ppa-drv-grx500-mpe is not set
+# CONFIG_PACKAGE_kmod-ppa-drv-mpe-ip97 is not set
+CONFIG_PACKAGE_mcast-pa=y
+
+#################### DSL related
+CONFIG_PACKAGE_dsl-cpe-control-vrx=y
+CONFIG_dsl-cpe-mei-vrx_DEVICE_VR11=y
+CONFIG_dsl-cpe-mei-vrx_IRQ_POLLING_ACTIVE=y
+CONFIG_PACKAGE_kmod-dsl-cpe-mei-vrx=y
+CONFIG_PACKAGE_ifxos=y
+CONFIG_PACKAGE_kmod-directconnect-dp=y
+CONFIG_PACKAGE_kmod-vrx518_tc_drv=y
+CONFIG_PACKAGE_vrx518_aca_fw=y
+CONFIG_PACKAGE_vrx518_ppe_fw=y
+CONFIG_dsl-cpe-api-vrx_MODEL_DEBUG=y
+CONFIG_dsl-cpe-control-vrx_DTI=y
+CONFIG_dsl-cpe-control-vrx_MODEL_DEBUG=y
+# yes intel dsl script need this.
+CONFIG_BUSYBOX_CONFIG_USLEEP=y
+#################### DSL related end
+
+#################### WIFI related
+CONFIG_PACKAGE_kmod-lantiq-wlan-wave-support_5_x=y
+CONFIG_PACKAGE_ltq-wlan-wave_5_x=y
+CONFIG_FEATURE_LTQ_WAVE_500_PCIE=y
+# CONFIG_FEATURE_LTQ_WAVE_500 is not set
+CONFIG_FEATURE_LTQ_WAVE_AR10_SUPPORT=y
+# CONFIG_FEATURE_LTQ_WAVE_STA is not set
+# CONFIG_FEATURE_LTQ_WAVE_DEBUG_TFTP_BINS is not set
+# CONFIG_FEATURE_LTQ_WAVE_FGPA_DUMMY_PHY is not set
+CONFIG_FEATURE_LTQ_WAVE_500B=y
+####################
+
+# the options below this point is wrong but packages wont compile
+
+# CONFIG_PACKAGE_icwmp-curl is not set
+# CONFIG_PACKAGE_juci-icwmp is not set
+# CONFIG_PACKAGE_libcgroup is not set
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libdatamodel is not set
+
+# CONFIG_TARGET_ROOTFS_INITRAMFS is not set
+# CONFIG_TARGET_ROOTFS_SQUASHFS is not set
+

iop/configs/target/intel_mips/speedport_smart3/config

@@ -0,0 +1,3 @@
+# temporary solution for kernel
+CONFIG_KERNEL_GIT_BRANCH="easy550_anywan_smart3board"
+CONFIG_KERNEL_GIT_COMMIT="58796d57c6da6bba984c781c05222349f7c2b655"

iop/configs/target/iopsys_brcm63xx_arm/config

@@ -0,0 +1,15 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+
+# CONFIG_PACKAGE_juci-broadcom-wl is not set
+# CONFIG_PACKAGE_juci-minisnmpd is not set
+# CONFIG_PACKAGE_juci-router-openwrt is not set
+# CONFIG_PACKAGE_speedsvc is not set
+
+# CONFIG_juci_broadcom_wl is not set
+# CONFIG_juci_minisnmpd is not set
+# CONFIG_juci_router_openwrt is not set
+
+# CONFIG_PACKAGE_brcminfo is not set
+CONFIG_PACKAGE_brcm_fw_tool=y
+

iop/configs/target/iopsys_brcm63xx_arm/dg400/config

@@ -0,0 +1,4 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_arm/dg400prime/config

@@ -0,0 +1,4 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_arm/eg400/config

@@ -0,0 +1,7 @@
+CONFIG_BCM_I2C=y
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_TARGET_NO_DSL=y
+

iop/configs/target/iopsys_brcm63xx_arm/f104/config

@@ -0,0 +1,6 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_USE_DSL=y
+CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/f104w/config

@@ -0,0 +1,6 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_USE_DSL=y
+CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/sdx810_rg/config

@@ -0,0 +1,5 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_TARGET_NO_DSL=y

iop/configs/target/iopsys_brcm63xx_mips/cg300/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/config

@@ -0,0 +1,15 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+
+# CONFIG_PACKAGE_juci-broadcom-wl is not set
+# CONFIG_PACKAGE_juci-minisnmpd is not set
+# CONFIG_PACKAGE_juci-router-openwrt is not set
+# CONFIG_PACKAGE_speedsvc is not set
+
+# CONFIG_juci_broadcom_wl is not set
+# CONFIG_juci_minisnmpd is not set
+# CONFIG_juci_router_openwrt is not set
+
+# CONFIG_PACKAGE_brcminfo is not set
+CONFIG_PACKAGE_brcm_fw_tool=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg200/config

@@ -0,0 +1,3 @@
+CONFIG_BCM_I2C=y
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg200al/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg301/config

@@ -0,0 +1,2 @@
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg301al/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/eg200/config

@@ -0,0 +1,5 @@
+CONFIG_BCM_I2C=y
+CONFIG_TARGET_NO_DECT=y
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_ENDPOINT_MODULE=y
+

iop/configs/target/iopsys_brcm63xx_mips/eg300/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/vg50/config

@@ -0,0 +1,4 @@
+CONFIG_TARGET_NO_DHD=y
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_ramips/config

@@ -0,0 +1,14 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+# CONFIG_PACKAGE_power-management is not set
+# CONFIG_PACKAGE_qos-scripts is not set
+# CONFIG_PACKAGE_mtd-utils-deubinize is not set
+# CONFIG_PACKAGE_mtd-utils-imagewrite is not set
+# CONFIG_PACKAGE_mtd-utils-mkfs.jffs2 is not set
+# CONFIG_PACKAGE_mtd-utils-nanddump is not set
+CONFIG_PACKAGE_mtd-utils-nandwrite=y
+CONFIG_PACKAGE_mtk-bndstrg=y
+CONFIG_PACKAGE_igmpproxy=y
+CONFIG_PACKAGE_kmod-nf-nathelper=y
+CONFIG_PACKAGE_kmod-nf-nathelper-extra=y
+# CONFIG_PACKAGE_endptmngr is not set

iop/iop.completion

@@ -34,8 +34,9 @@ _iop()
 
     iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
              feeds_update genconfig generate_tarballs install_key \
-             scp_changes setup_host ssh_install_key status \
-             update_package update_feed_branches ssh_upgrade"
+             scp_changes setup_host ssh_install_key ssh_sysupgrade \
+             ssh_sysupgrade_latest ssh_sysupgrade_latest_w status \
+             update_package update_feed_branches"
 
     if [ $COMP_CWORD -eq 1 ] ; then
 
@@ -75,13 +76,7 @@ _iop()
                 fi
                 return 0
                 ;;
-            ssh_upgrade)
-	        if [ "$prev" == "-f" ] ; then
-		    _filedir
-		else
-		    COMPREPLY=( $(compgen -W "-f -t -i -n -x -b" -- ${cur}) )
-		fi
-	         ;;
+
             *)
                 # No arguments or arguments not supported yet
                 ;;

iop/scripts/feeds_update.sh

@@ -32,15 +32,13 @@ function feeds_update {
     fi
 
     # targets need to be installed explicitly
-    targets="iopsys-brcm63xx-mips iopsys-brcm63xx-arm iopsys-ramips intel_mips"
-    for target in $targets
-    do
-	rm -f target/linux/$target
-	./scripts/feeds install -p targets $target
-    done
+    ./scripts/feeds install -p targets iopsys-brcm63xx-mips
+    ./scripts/feeds install -p targets iopsys-brcm63xx-arm
+    ./scripts/feeds install -p targets iopsys-ramips
+    ./scripts/feeds install -p intel_targets intel_mips
 
     # install all packages
-    ./scripts/feeds install -a
+    ./scripts/feeds install -a 
 
     # remove broken symlinks ( for packages that are no longer in the feed )
     find -L package/feeds -maxdepth 2 -type l -delete
@@ -49,7 +47,7 @@ function feeds_update {
     make defconfig
 
     # record when we last run this script
-    touch tmp/.iop_bootstrap
+    touch tmp/.iop_bootstrap 
 
     # always return true
     exit 0

iop/scripts/genconfig.sh

@@ -7,104 +7,45 @@ function genconfig {
 	export FILEDIR="files/"
 	export THEMEDIR="themes"
 	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/iopsys/iop"
+	export CONFIGPATH="package/feeds/iopsys/iop/configs"
 	CUSTPATH="customerconfigs"
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
 	export DEVELOPER=0
+	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
+
 	target="bogus"
-	config_path=""
-	brcm63xx_mips="target/linux/iopsys-brcm63xx-mips"
-	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
-	ramips="target/linux/iopsys-ramips"
-	intel_mips="target/linux/intel_mips"
-
-	Red='\033[0;31m'          # Red
-	Color_Off='\033[0m'       # Text Reset
-	Yellow='\033[0;33m'       # Yellow
-
-	function find_last {
-	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
-	}
-
-	function is_new {
-	    for opt in $conf_warned
-	    do
-		if [ "$opt" == "$1" ]
-		then
-		    return 1
-		fi
-	    done
-	    # option not found return true
-	    return 0
-	}
-
-	function verify_config {
-	    IFS=$'\n'
-	    org=$(<.genconfig.config)
-	    unset IFS
-	    local num
-	    local conf_opt
-	    local conf_org
-	    local conf_new
-
-	    #echo "lines to check $tot_lines"
-	    num=0
-	    for line in $org
-	    do
-		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
-		if [ -n "${conf_opt}" ]
-		then
-		    conf_org=$(find_last ${conf_opt} .genconfig.config)
-		    conf_new=$(find_last ${conf_opt} .config)
-		    if [ "$conf_org" != "$conf_new" ]
-		    then
-			if is_new $conf_opt
-			then
-			    echo -e "config option [${Red}$conf_opt${Color_Off}] is not set correctly in .config"
-			    echo -e "got value [${Yellow}$conf_new${Color_Off}] but wanted [${Yellow}$conf_org${Color_Off}]"
-			    echo "This is a real problem somebody needs to investigate"
-			    echo ""
-			    conf_warned="$conf_warned $conf_opt"
-			fi
-		    else
-			true
-			# for debug to see all options
-			#echo -e "wanted [$conf_org] got [$conf_new]"
-		    fi
-		fi
-		num=$((num+1))
-	    done
-	}
+	masterconfig=1
 
 	# Takes a board name and returns the target name in global var $target
 	set_target() {
 	    local profile=$1
 
+	    local iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25 hpc_hu02 eg200"
+	    local iopsys_brcm63xx_arm="dg400 eg400 sdx810_rg f104w f104 dg400prime dg400primeb 963138REF_P502"
+	    local iopsys_ramips="ex400 sdx810_ap"
+	    local intel_mips="easy550 easy350 speedport_smart3"
+	    local ramips="mt7621"
 
-		[ -e $brcm63xx_mips/genconfig ] &&
-			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
-		[ -e $brcm63xx_arm/genconfig ] &&
-			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
-		[ -e $ramips/genconfig ] &&
-			iopsys_ramips=$(cd $ramips; ./genconfig)
-		[ -e $intel_mips/genconfig ] &&
-			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
-
-	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips; do
-				echo "$list based boards:"
-				for b in ${!list}; do
-					echo -e "\t$b"
-				done
-			done
-			return
+	    if [ "$profile" == "LIST" ]
+	    then
+		for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips intel_mips
+		do
+		    echo "$list based boards:"
+		    for b in ${!list}
+		    do
+			echo -e "\t$b"
+		    done
+		done
+		return
 	    fi
+	    
+	    
+	    local targets
 
 	    for p in $iopsys_brcm63xx_mips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_mips"
-			config_path="$brcm63xx_mips/config"
 		    return
 		fi
 	    done
@@ -112,7 +53,6 @@ function genconfig {
 	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_arm"
-			config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
@@ -120,15 +60,21 @@ function genconfig {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
-			config_path="$ramips/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_intel_mips; do
+	    for p in $ramips; do
+		if [ $p == $profile ]; then
+		    target="ramips"
+		    masterconfig=0
+		    return
+		fi
+	    done
+
+	    for p in $intel_mips; do
 		if [ $p == $profile ]; then
 		    target="intel_mips"
-			config_path="$intel_mips/config"
 		    return
 		fi
 	    done
@@ -145,12 +91,17 @@ function genconfig {
 		mediatekAllowed=0
 		wifilifeAllowed=0
 
-		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
-		git ls-remote git@dev.iopsys.eu:mediatek/linux.git -q 2>/dev/null && mediatekAllowed=1
-		git ls-remote git@dev.iopsys.eu:dialog/natalie-dect-12.26.git -q 2>/dev/null && natalieAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/wifilife.git -q 2>/dev/null && wifilifeAllowed=1
-		git ls-remote git@private.inteno.se:ice-client.git -q -q 2>/dev/null && iceAllowed=1
+		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
+		for repo in $allowedRepos; do
+			case $repo in
+			bcmkernel) bcmAllowed=1 ;;
+			ice-client) iceAllowed=1 ;;
+			endptcfg) endptAllowed=1 ;;
+			natalie-dect*) natalieAllowed=1 ;;
+			linux) mediatekAllowed=1 ;;
+			wifilife) wifilifeAllowed=1 ;;
+			esac
+		done
 	}
 
 	v() {
@@ -159,17 +110,17 @@ function genconfig {
 
 	usage() {
 		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
+		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer ]"
 		echo
-		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\t\tVerbose"
+		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
+		echo -e "  -v|--verbose\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
-		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
-		echo -e "  -h|--help\t\tShow this message"
+		echo -e "  -p|--profile\tSet profile (if exists) default juci"
+		echo -e "  -s|--override\tEnable 'Package source tree override'"
+		echo -e "  -h|--help\tShow this message"
 		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\t\tList all Customers and their board types"
-		echo -e "  -b|--boards\t\tList all board types"
+		echo -e "  -a|--list-all\tList all Customers and their board types"
+		echo -e "  -b|--boards\tList all board types"		
 		echo
 		echo "Example ./iop genconfig vg50 TELIA"
 		echo "(if no customerconfig is chosen the Inteno Config will be used)"
@@ -232,7 +183,7 @@ function genconfig {
 
 	setup_dirs()
 	{
-		if git ls-remote $CUSTREPO -q 2>/dev/null; then
+		if ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -qw ${CUSTREPO:22}; then
 			if [ ! -d "$CUSTPATH" ]; then
 				git clone "$CUSTREPO" "$CUSTPATH"
 			elif [ $IMPORT -eq 1 ]; then
@@ -263,42 +214,62 @@ function genconfig {
 	create_and_copy_files()
 	{
 		local BOARDTYPE=$1
-		shift
-		local CUSTOMERS=$@
+		local CUSTOMER=$2
 
-		# Validate seleced board and customers
+		# Validate seleced board and customer
 		set_target $BOARDTYPE
 		if [ $target == "bogus" ]; then
 			echo "Hardware profile does not exist"
 			exit 1
-		elif [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-					echo "Customer profile for '$CUSTOMER' does not exist"
+		elif [ -n "$CUSTOMER" ]; then
+			if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
+				echo "Customer profile for '$CUSTOMER' does not exist"
+				exit 1
+			elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
+				echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
+				if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+					echo "Common profile configuration will be used"
+				else
 					exit 1
-				elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-					echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-					if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-						echo "Common profile configuration will be used"
-					else
-						exit 1
-					fi
 				fi
-			done
+			fi
 		fi
 
 		# Generate base config
+		# Used only for iopsys targets, not openwrt targets
 		rm -f .config
-		v "Config $BOARDTYPE selected"
-		v "cp $CONFIGPATH/config .config"
-		cp $CONFIGPATH/config .config
+		if [ $masterconfig -eq 1 ]; then
+			v "Config $BOARDTYPE selected"
+			v "cp $CONFIGPATH/config .config"
+			cp $CONFIGPATH/config .config
+		fi
 
-		if [ -f $config_path/config ]; then
-		    cat $config_path/config >> .config
+		# Add target (soc/board specific )
+		if [ -f $CONFIGPATH/target/config ]; then
+		    cat $CONFIGPATH/target/config >> .config
 		fi
-		if [ -f $config_path/$BOARDTYPE/config ]; then
-		    cat $config_path/$BOARDTYPE/config >> .config
+		if [ -f $CONFIGPATH/target/$target/config ]; then
+		    cat $CONFIGPATH/target/$target/config >> .config
 		fi
+		if [ -f $CONFIGPATH/target/$target/$BOARDTYPE/config ]; then
+		    cat $CONFIGPATH/target/$target/$BOARDTYPE/config >> .config
+		fi
+
+		# Apply profile diff to master config if selected
+		if [ -n "$PROFILE" ]; then
+			if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
+				cat $CONFIGPATH/$PROFILE.diff >> .config
+			elif [ "$PROFILE" == "juci" ]; then
+				v "Default profile (juci) is selected."
+			else
+				echo "ERROR: profile $PROFILE does not exist!"
+				exit 1
+			fi
+		else
+			v "No profile selected! Using default."
+		fi
+
+		# Set target and profile
 
 		#special handling for intel_mips which use TARGET_DEVICES
 		if [ "$target" = "intel_mips" ]; then
@@ -314,33 +285,31 @@ function genconfig {
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
 		fi
 
-		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
+		echo "$CUSTOMER $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
 		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
-					customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
-					v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
-					cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-				fi
-			done
+		if [ -n "$CUSTOMER" ]; then
+			if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
+				v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
+				cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
+			fi
+			if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
+				v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
+				cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
+			fi
+			if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
+				customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
+				v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
+				cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
+			fi
+			if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+				v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
+				cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
+			fi
+			if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
+				v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
+				cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
+			fi
 		fi
 
 		# Set target version
@@ -362,7 +331,7 @@ function genconfig {
 			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
 			[ $wifilifeAllowed -eq 0 ] && echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		else
-			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
+			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
 			echo "CONFIG_ICE_OPEN=y" >> .config
 			echo "CONFIG_ENDPT_OPEN=y" >> .config
@@ -371,11 +340,6 @@ function genconfig {
 			echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		fi
 
-		if [ -n "$BRCM_MAX_JOBS" ]
-		then
-		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
-		fi
-
 		# Force regeneration of themes
 		touch package/feeds/juci/juci/Makefile
 
@@ -387,19 +351,23 @@ function genconfig {
 		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
 		# so just touch that file.
 		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-
-		# Store generated config
-		cp .config .genconfig.config
-
+				
 		# Set default values based on selected parameters
 		v "$(make defconfig 2>&1)"
 
-		echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+		# Temporary fixup for juci/luci profile
+		if [ "$PROFILE" == "luci" ]; then
+			sed -i '/CONFIG_DEFAULT_juci/d' .config
+			sed -i '/CONFIG_PACKAGE_juci/d' .config
+			sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
+		fi
+
+		if [ $masterconfig -eq 1 ]; then
+			echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+		fi
 
 		# Clean base-file package to force rebuild when changing profile
 		v "$(make package/base-files/clean 2>&1)"
-
-		verify_config
 	}
 
 	####### main #####
@@ -424,7 +392,6 @@ function genconfig {
 			-p|--profile) export PROFILE="$2"; shift;;
 			-r|--repo) export CUSTREPO="$2"; shift;;
 			-s|--override) export SRCTREEOVERR=1;;
-			-S|--brcmsingel) export BRCM_MAX_JOBS=1;;
 			-h|--help) usage;;
 			-l|--list) list_customers 0 $2;;
 			-a|--list-all)list_customers 1;;
@@ -442,7 +409,7 @@ function genconfig {
 		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
 
 		setup_dirs
-		create_and_copy_files "$@"
+		create_and_copy_files "$1" "$2"
 	fi
 }
 

iop/scripts/generate_tarballs.sh

@@ -14,7 +14,7 @@ build_bcmkernel_consumer() {
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
 	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
 	scp -pv $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
-	ssh $SERVER "[ -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz ] && ln -sf $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz $FPATH/bcmopen-$board-$majver.$minver-latest"
+	ssh $SERVER "[ -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz ] && ln -sf $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz $FPATH/bcmopen-$board-$majver.$minver.tar.gz"
 	rm -f $tarfile
 	cd "$curdir"
 }

iop/scripts/install_key.sh

@@ -10,7 +10,7 @@ function install_key {
     echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
     echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
     echo "tty/0::askfirst:/bin/ash --login" >>files/etc/inittab
-    echo "console::askfirst:/bin/cttyhack /bin/ash --login" >>files/etc/inittab
+    echo "ttyS0::askfirst:/bin/ash --login" >>files/etc/inittab
 
     echo Done
 }

iop/scripts/iopupgrade.sh

@@ -1,326 +0,0 @@
-# this is a developer helper script to install firmware on a remote host with SSH
-
-function upd_usage {
-    echo "usage: $0 iopupgrade -t <host> -f <file> [opts] "
-    echo ""
-    echo "   Default host is 192.168.1.1"
-    echo "   Default firmware file is the newest one found"
-    echo "   Default is to not keep configuration"
-    echo "opts:"
-    echo ""
-    echo "	-i	Interactive use, Allows to select firmware file"
-    echo "	-n	Do not do the final reboot of the target board"
-    echo "	-c	Keep configuration"
-    echo "	-x	Force install even if firmware is not for this board"
-    echo "	-b	Force install of bootloader regardless of version installed"
-    echo "	-s	Use sysupgade. old upgrade method, needed for old releases that do not have iopu"
-}
-
-function set_config_string {
-    eval `grep $1 .config`
-}
-
-function upd_ask_ok {
-    echo "Will Continue with the following settings"
-    echo "-----------------------------------------"
-    printf "%20s: %s\n"  "Firmare file" "$upd_fw_base"
-    printf "%20s: %s\n"  "Host ip" "$upd_host"
-    printf "%20s: " "Reboot";               if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Keep config";          if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Force bootloader";     if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Force image upgrade";  if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Use sysupgrade";       if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    echo "-----------------------------------------"
-
-    if [ "$upd_sysupgrade" == "0" ]
-       then
-	   if [ "$upd_keepconf"   == "1" ] ;then echo "keeping config is just a fantasy it's not yet implemented, try sysupgrade";fi
-    fi
-
-    echo -n "Continue? [Y/n/q]:"
-    read answer
-
-    case $answer in
-	n|N)
-	    return 1;;
-	q|Q)
-	    exit 1;;
-	y|Y|*)
-	    return 0;;
-    esac
-}
-
-function upd_select_file {
-
-    dialog --keep-tite --title "To select file use TAB/ARROW to hilight then press SPACEBAR -> RETURN" \
-	   --fselect "bin/targets/$CONFIG_TARGET_BOARD/generic/" \
-	   $((lines -10)) $((cols -5)) \
-	   2> $tempfile
-
-    new_file=$(cat $tempfile)
-    if [ -n "$new_file" ]
-    then
-	upd_fw="$new_file"
-	upd_fw_base=$(basename $upd_fw);
-    fi
-}
-
-function upd_select_target {
-
-    dialog --keep-tite --title "Input the name/ip number of target board" \
-	   --inputbox "Name/IP" \
-	   $((lines -10)) $((cols -5)) \
-	   "$upd_host" \
-	   2> $tempfile
-
-    new_file=$(cat $tempfile)
-    if [ -n "$new_file" ]
-    then
-	upd_host="$new_file"
-    fi
-}
-
-
-function upd_select_reboot {
-    dialog --keep-tite --radiolist "Should the board reboot after download finished" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Reboot" "Restart board after done"       `if [ "$upd_noreboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "No reboot" "Continue running old system" `if [ "$upd_noreboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"No reboot")
-	    upd_noreboot=1
-	;;
-	"Reboot")
-	    upd_noreboot=0
-	    ;;
-    esac
-}
-
-function upd_select_config {
-    dialog --keep-tite --radiolist "Should the configuration be keept" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Keep" "Keep the config from old system"      `if [ "$upd_keepconf" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Default" "Use default config for new system" `if [ "$upd_keepconf" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Keep")
-	    upd_keepconf=1
-	    ;;
-	"Default")
-	    upd_keepconf=0
-	    ;;
-    esac
-}
-
-function upd_select_forceboot {
-    dialog --keep-tite --radiolist "Should the boot loader be updated reagardless of version installed" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Force" "Alwasy update boot loader"                `if [ "$upd_forceboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Version check" "Only upgrade if version is newer" `if [ "$upd_forceboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Force")
-	    upd_forceboot=1
-	    ;;
-	"Version check")
-	    upd_forceboot=0
-	    ;;
-    esac
-}
-
-function upd_select_forceimage {
-    dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Force" "Dissable sanity check and force use of image (dangerous)" `if [ "$upd_forceimage" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Only compatible" "Normal checks apply"                            `if [ "$upd_forceimage" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Force")
-	    upd_forceimage=1
-	    ;;
-	"Only compatible")
-	    upd_forceimage=0
-	    ;;
-    esac
-}
-
-function upd_select_sysupgrade {
-    dialog --keep-tite --radiolist "Use the old way to upgrade a board" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "iopu" "Use the iop upgrade methode"          `if [ "$upd_sysupgrade" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "sysupgrade" "Use the old sysupgrade methode" `if [ "$upd_sysupgrade" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"iopu")
-	    upd_sysupgrade=0
-	    ;;
-	"sysupgrade")
-	    upd_sysupgrade=1
-	    ;;
-    esac
-}
-
-function upd_select {
-
-    dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select Item to change" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Firmare file" "$upd_fw_base"\
-	   "Host ip" "$upd_host" \
-	   "Reboot"               `if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Keep config"          `if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Force bootloader"     `if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Force image upgrade"  `if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "sysupgrade"           `if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   2> $tempfile
-
-
-    case $(cat $tempfile) in
-	"Firmare file")
-	    upd_select_file
-	    ;;
-	"Host ip")
-	    upd_select_target
-	    ;;
-	"Reboot")
-	    upd_select_reboot
-	    ;;
-	"Keep config")
-	    upd_select_config
-	    ;;
-	"Force bootloader")
-	    upd_select_forceboot
-	    ;;
-	"Force image upgrade")
-	    upd_select_forceimage
-	    ;;
-	"sysupgrade")
-	    upd_select_sysupgrade
-	    ;;
-	*)
-	    return
-	;;
-    esac
-    upd_select
-}
-function upd_select_start {
-    lines=$(tput lines)
-    cols=$(tput cols)
-    tempfile=`tempfile 2>/dev/null` || tempfile=/tmp/test$$
-    trap "rm -f $tempfile" 0 1 2 5 15
-    upd_select
-
-}
-
-function ssh_upgrade {
-    upd_noreboot=0
-    upd_forceboot=0
-    upd_keepconf=0
-    upd_forceimage=0
-    upd_fw_base=""
-    upd_fw=""
-    upd_host="192.168.1.1"
-    upd_sysupgrade=0
-    do_dialog=0
-
-    while getopts "f:hnxt:iscb" opt; do
-	case $opt in
-	    n)
-		upd_noreboot=1
-		;;
-	    x)
-		upd_forceimage=1
-		;;
-	    b)
-		upd_forceboot=1
-		;;
-	    c)
-		upd_keepconf=1
-		;;
-	    v)
-		verbose=$OPTARG
-		;;
-	    f)
-		upd_fw=$OPTARG
-		;;
-	    t)
-		upd_host=$OPTARG
-		;;
-	    i)
-		do_dialog=1
-		;;
-	    s)
-		upd_sysupgrade=1
-		;;
-	    h)
-		upd_usage
-		exit 1
-		;;
-	    \?)
-		echo "Invalid option: -$OPTARG" >&2
-		exit 1
-		;;
-	esac
-    done
-
-    if [ -n "$upd_fw" ]
-    then
-	upd_fw_base=$(basename $upd_fw);
-    else
-	set_config_string CONFIG_TARGET_BOARD
-	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
-
-	for upd_fw_base in $firmwares
-	do
-	    #echo "firmware $upd_fw"
-	    break
-	done
-	upd_fw="bin/targets/$CONFIG_TARGET_BOARD/generic/$upd_fw_base"
-    fi
-
-    [ $do_dialog -eq 1 ] && upd_select_start
-
-    if ! upd_ask_ok
-    then
-	upd_select_start
-	if ! upd_ask_ok
-	then
-	    exit 1
-	fi
-    fi
-
-    if [ ! -f $upd_fw ]
-    then
-	echo "firmware file $firmware do not exist"
-	exit 1
-    fi
-
-    if [ $upd_sysupgrade -eq 0 ]
-    then
-	extra_args=""
-	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -n"
-	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args -x"
-	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
-
-	file_size_kb=`du -k "$upd_fw" | cut -f1`
-	cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
-    else
-	scp $upd_fw root@$upd_host:/tmp/ &&
-	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $3 /tmp/$upd_fw_base" &&
-	    echo "sysupgrade done!"
-    fi
-}
-
-register_command "ssh_upgrade" "-h <host> -f <file> [opts]  Install firmware on remote host with SSH"
-
-

iop/scripts/ssh_sysupgrade.sh

@@ -0,0 +1,56 @@
+# this is a developer helper script to install firmware on a remote host with SSH
+
+function usage {
+	echo "usage: $0 ssh_sysupgrade <host> <file> [opts]"
+}
+
+function ssh_sysupgrade {
+	if [ -z "$1" ] ; then
+		usage
+		echo "Error: host required"
+		exit 1
+	fi
+	if [ -z "$2" ] ; then
+		usage
+		echo "Error: firmware filename required"
+		exit 1
+	fi
+	if [ ! -e $2 ] ; then
+		usage
+		echo "Error: firmware file does not exist"
+		exit 1
+	fi
+	IMAGE=`basename $2`
+	echo "sysupgrade host: $1 with file $IMAGE"
+	[ "$2" ] && [ -e "$2" ] && scp $2 root@$1:/tmp/ && ssh -o ConnectTimeout=60 root@$1 "sysupgrade -v $3 /tmp/$IMAGE" && echo "sysupgrade done!"
+}
+
+register_command "ssh_sysupgrade" "<host> <file> [opts]  Install firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*/*/*.y[23] | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest" "<host> [opts]  Install latest ubifs firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest_w {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest_w <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*.w | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest_w" "<host> [opts]  Install latest jffs2 firmware on remote host with SSH"

iop/scripts/update_feed_branches.sh

@@ -36,17 +36,17 @@ function update_feed_branches {
 		echo "Updating release branch $release to specific commit hash given in feeds.conf for each feed repo"
 	fi
 
-	ifeeds="$(grep -r 'dev.iopsys.eu' feeds.conf | awk '{print$2}' | tr '\n' ' ')"
+	ifeeds="$(grep -r feed_inteno feeds.conf  | awk '{print$2}' | cut -d'_' -f3 | tr '\n' ' ')"
 
 	for f in $ifeeds; do
-		commith=$(grep $f feeds.conf | cut -d'^' -f2)
-		cd $ipath/feeds/$f
+		commith=$(grep feed_inteno_$f feeds.conf | cut -d'^' -f2)
+		cd $ipath/feeds/feed_inteno_$f
 		git branch -D $release 2>/dev/null
-		echo "$f: updating release branch $release to commit $commith"
+		echo "feed_inteno_$f: updating release branch $release to commit $commith"
 		git checkout $commith
 		git push origin :$release
 		git checkout -b $release
-		git push --set-upstream origin $release
+		git push origin $release
 		cd $ipath
 	done
 

iop/scripts/update_package.sh

@@ -496,7 +496,6 @@ check_feeds()
     for feed in `echo $feeds`
     do
 		feed_hash=$(feeds_hash $feed)
-		[ -n "$feed_hash" ] || continue
 		if [ -d feeds/$feed ]; then
 			in_git=$(cd feeds/$feed; git rev-parse HEAD)
 

iopupgrade/Makefile

@@ -1,55 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=iopupgrade
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=01f2afd6c831d6f9eb2940c7e7af16f7e4d439c2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopupgrade
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/iopupgrade
-	CATEGORY:=Utilities
-	TITLE:=Iopsys system upgrade utility
-	URL:=
-#	DEPENDS:=
-endef
-
-define Package/iopupgrade/description
-	Application handling peripheral
-endef
-
-define Package/iopupgrade/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/etc/
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/iopupgrade $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,iopupgrade))
- 

iopupgrade/files/sbin/iopu

@@ -1,279 +0,0 @@
-#!/bin/sh
-
-###############################################################################
-# Global variables. can be used directly in any function called.
-cur_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
-		# eg: rootfs_0 or rootfs_1, currently used
-upd_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
-		# eg: rootfs_0 or rootfs_1, the one we want to update
-cmdline=""	# command line settings.
-cmdline_match="" # Headers to match to the image
-
-###############################################################################
-# file local variables. should not be used in imported functions. Can be used
-# by functions declared in this script
-chroot_cmdline=""	# command line for the iop_chroot command.
-board=""		# string, Board name that is going to be matched
-			# against header of firmware image
-upd_ubi_id=""		# num,	UBI volume number for the volume name
-			# "rootfs_$upd_vol", use to know what volume to run
-			# ubiupdatevol on.
-run_cleanup=0		# if set the cleanup should be run otherwise we skip it.
-run_mount_cleanup=0	# set if we should run umount in cleanup
-upd_kernel=0		# set to 1 if system has the kernel in own mtd partition
-upd_cfe=0		# set to 1 if system is using cfe as bootloader.
-log_stdout=1		# set to 0 to prevent the log to also print to stdout
-upd_noreboot=0		# set to 1 if we should not reboot after programming
-upd_forceimage=0	# set this to force upgrade even if image is for wrong board.
-upd_forceboot=0		# set this to force upgrade of boot loader
-###############################################################################
-# import external functions
-source /lib/upgrade/iopsys.sh
-[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
-
-# only call function if it exists
-function_call() {
-    if type "$1" 2>/dev/null >/dev/null
-    then
-	$1 $@
-    fi
-}
-
-###############################################################################
-# Cleanup and error handling functions.
-function log {
-    TIME=$(date)
-    [ $log_stdout -eq 1 ] && echo "$@"
-    echo "[$TIME] $@" >>/tmp/upd_log
-}
-
-# we need to handle ctrl-c, segmentation fault, sigpipe and other abnormal
-# terminations. no printing to stdout/stderr allowed in this function or
-# anyhting it calls as stdout/stderr might no longer exist
-function finish {
-
-    if [ "$run_cleanup" == "1" ]
-    then
-
-	function_call upd_cleanup
-	log ""
-    fi
-
-    if [ "$run_mount_cleanup" == "1" ]
-    then
-	log "Cleaning up after mount"
-	umount_newroot
-    fi
-    # always kill the timeout process, will leave the sleep but that is harmless
-    # as long as the kill will nerver be run.
-    kill $TIMEOUT_PID 2>/dev/null
-
-    lock -u /tmp/iopu.lock
-}
-
-function sig_pipe {
-    log_stdout=0  # stdin,stdout,stderr do not exist anymore
-    log "Got sigpipe. Turning of log printing to stdout"
-}
-
-# if a timout happens terminate
-function timeout {
-    finish
-    exit 1
-}
-
-# Not much that can be done if the mount fails but to try again.
-# if after 10 seconds there still is errors abort program.
-# UBIFS has some wierd time intervall after ubiupdatevol where
-# a mount of the newly written data results in a busy error.
-function mount_retry {
-    local tries=0
-
-    while [ $tries -lt 10 ]
-    do
-	if mount $@ 2>/dev/null
-	then
-	    return
-	fi
-	tries=$((tries + 1))
-	sleep 1
-    done
-
-    log "mount failed for command [mount $@] so upgrade failed."
-
-    exit 1
-}
-
-function mount_newroot {
-    run_mount_cleanup=1
-    mkdir -p /tmp/newroot
-    mkdir -p /tmp/newroot_overlay
-
-    mount_retry -t ubifs ubi0:rootfs_$upd_vol /tmp/newroot
-
-    mount_retry -o noatime,lowerdir=/tmp/newroot,upperdir=/tmp/newroot/overlay,workdir=/tmp/newroot/lib/overlay.tmp -t overlay "overlayfs:/tmp/newroot/overlay" /tmp/newroot_overlay
-    mount_retry --bind /tmp/newroot/ /tmp/newroot_overlay/rom
-
-    mount_retry --bind /dev /tmp/newroot_overlay/dev
-    mount_retry --bind /proc /tmp/newroot_overlay/proc
-    mount_retry --bind /sys /tmp/newroot_overlay/sys
-    mount_retry -t tmpfs -o noatime,mode=0755 root /tmp/newroot_overlay/tmp
-
-    mkdir -p /tmp/newroot_overlay/tmp/oldroot
-    mount_retry --bind / /tmp/newroot_overlay/tmp/oldroot
-    mount_retry --bind /tmp /tmp/newroot_overlay/tmp/oldroot/tmp
-}
-
-function umount_newroot {
-    umount /tmp/newroot_overlay/tmp/oldroot/tmp
-    umount /tmp/newroot_overlay/tmp/oldroot
-    umount /tmp/newroot_overlay/tmp
-    umount /tmp/newroot_overlay/sys
-    umount /tmp/newroot_overlay/proc
-    umount /tmp/newroot_overlay/dev
-    umount /tmp/newroot_overlay/rom
-    umount /tmp/newroot_overlay
-    umount /tmp/newroot
-    run_mount_cleanup=0
-}
-
-function usage {
-    echo "usage: $0 iopu [opts] "
-    echo ""
-    echo "opts:"
-    echo ""
-    echo "	-n	Do not do the final reboot of the target board"
-    echo "	-c	Keep configuration"
-    echo "	-x	Force install even if firmware is not for this board"
-    echo "	-b	Force install of bootloader regardless of version installed"
-    echo "	-r	Jump into chroot env of other system"
-}
-
-###############################################################################
-
-# just one instance
-# this check has to be done before we install handler to avoid removing the
-# lock even if it was not available.
-if  ! lock -n /tmp/iopu.lock
-then
-    echo "Another instance of iopu already running"
-    echo "If you are sure this is wrong remove file /tmp/iopu.lock"
-    exit 1
-fi
-
-trap finish EXIT
-trap timeout SIGALRM
-trap sig_pipe SIGPIPE
-
-while getopts "nrxb" opt; do
-    case $opt in
-	n)
-	    upd_noreboot=1
-	    ;;
-	x)
-	    upd_forceimage=1
-	    ;;
-	b)
-	    upd_forceboot=1
-	    ;;
-	r)
-	    upd_vol=$(get_flashbank_next)
-	    mount_newroot
-	    (ENV=/sbin/iopu_chroot_env chroot /tmp/newroot_overlay /bin/sh)
-	    echo ""
-	    umount_newroot
-	    exit 0
-	    ;;
-	h)
-	    upd_usage
-	    exit 1
-	    ;;
-    esac
-done
-
-# put a timeout on this if it takes longer than 120 seconds we should abort
-# and clean up
-(
-sleep 120	# if 2 minutes pass
-kill -ALRM $$	2>/dev/null # send it a SIGALRM signal
-)&
-TIMEOUT_PID=$!
-
-log "Firmware upgrade started"
-
-# Should board name be checked
-if [ $upd_forceimage -eq 0 ]
-then
-   board=$(db get hw.board.iopVerBoard)
-   cmdline_match="board=$board"
-fi
-
-# find out what rootfs volume is active. 
-cur_vol=$(get_flashbank_current)
-upd_vol=$(get_flashbank_next)
-
-# convert volume name "rootfs_$upd_vol" into ubifs volume id
-upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
-log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
-
-# prepare to match dsl.
-function_call upd_conf_dsl
-
-# prepare to update CFE if it exists
-function_call upd_conf_cfe
-
-# prepare to update kernel if it is stored in MTD/JFFS2 
-function_call upd_conf_kernel
-
-log "now starting writing data to flash with [ iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id ]"
-run_cleanup=1	# When we start to actually write data there might be some
-		# things that need cleanup if we get an error/crash
-iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id
-
-# in case of any error we abort
-if [ $? -ne 0 ]; then
-    log "iopupgrade program Failed"
-    exit 1
-fi
-
-log "Firmware programmed to flash."
-
-
-log "Transfering configuration to new system."
-
-# Force upgrade of boot loader
-[ $upd_forceboot -eq 1 ] && chroot_cmdline="$chroot_cmdline -b"
-
-mount_newroot
-chroot /tmp/newroot_overlay /sbin/iopu_chroot $chroot_cmdline
-umount_newroot
-
-log "Update fully installed."
-run_cleanup=0
-
-# Now make sure that we actually boot the new system on the next reboot
-upd_finnish
-
-# spawn the reboot to a subshell to allow the main program to quit before reset
-# to avoid any hanged network connection like ssh
-if [ $upd_noreboot -eq 0 ]
-then
-    (
-	log_stdout=0	# stdin,stdout,stderr do not exist anymore, we are in a
-			# subshell and then the trap is no longer working.
-	sleep 1
-	log "Rebooting NOW!!!"
-	log ""
-	reboot
-    )&
-    log "Reboot initiated"
-else
-    log "Skipping reboot"
-fi
-
-
-
-
-
-
-

iopupgrade/files/sbin/iopu_chroot

@@ -1,61 +0,0 @@
-#!/bin/sh
-#
-# This program is intended to be run in a chroot environment where the old system
-# is mounted in /tmp/oldroot
-#
-
-
-###############################################################################
-# Global variables. can be used directly in any function called.
-
-
-###############################################################################
-# file local variables. should not be used in imported functions. Can be used
-# by functions declared in this script
-upd_forceboot=0
-log_stdout=1		# set to 0 to prevent the log to also print to stdout
-
-###############################################################################
-# import external functions
-
-source /lib/upgrade/iopsys.sh
-[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
-
-
-# only call function if it exists
-function_call() {
-    if type "$1" 2>/dev/null >/dev/null
-    then
-	$1 $@
-    fi
-}
-# Cleanup and error handling functions.
-function log {
-    TIME=$(date)
-    [ $log_stdout -eq 1 ] && echo "$@"
-    echo "[$TIME] $@" >>/root/upd_log
-}
-
-
-while getopts "hb" opt; do
-    case $opt in
-	h)
-	    upd_usage
-	    exit 1
-	    ;;
-	b)
-	    upd_forceboot=1
-	    ;;
-	\?)
-	    echo "Invalid option: -$OPTARG" >&2
-	    exit 1
-	    ;;
-    esac
-done
-
-# copy old install log over
-cp /tmp/oldroot/tmp/upd_log /root/upd_log
-
-# Upgrade boot loader if needed.
-function_call upd_program_boot
-

iopupgrade/files/sbin/iopu_chroot_env

@@ -1,18 +0,0 @@
-#!/bin/sh
-# this is run when "iopr -r" is executed.
-# intended to just show what environment is actually started.
-
-cat /etc/banner
-
-echo "/tmp/oldroot:"
-echo "	Contains the running root filesystem. It is live so files are in use"
-echo "	Anything copying/reading files from there needs to make sure it is done safely."
-echo ""
-
-Color_Off='\033[0m'       # Text Reset
-Red='\033[0;31m'          # Red
-
-PS1="${Red}chroot_new${Color_Off}:\w\#"
-export PS1
-export Red
-export Color_Off

libjwt/Makefile

@@ -1,52 +0,0 @@
-
-# Copyright (C) 2018 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libjwt
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=866607c7741421c8ac99876e7201eb32d9af1b92
-PKG_SOURCE_URL:=https://github.com/benmcollins/libjwt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libjwt
-  CATEGORY:=Libraries
-  DEPENDS:=+libopenssl +jansson
-  TITLE:= libjwt
-endef
-
-
-#TARGET_CFLAGS += \
-#	-I$(STAGING_DIR)/usr/include
-#	-I$(STAGING_DIR)/usr/include/libnl3
-
-#MAKE_FLAGS += \
-#	CFLAGS="$(TARGET_CFLAGS)" \
-#	LDFLAGS="$(TARGET_LDFLAGS)" \
-#	FPIC="$(FPIC)" \
-#	PLATFORM="$(TARGET_PLATFORM)" \
-#	subdirs="$(subdirs)"
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/include/jwt.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-define Package/libjwt/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libjwt))

ltq-nand/Makefile

@@ -1,33 +0,0 @@
-#
-# Copyright (C) 2008-2016 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ltq-nand
-PKG_VERSION:=1.0
-
-PKG_SOURCE:=v$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/archive/
-#PKG_SOURCE_PROTO:=git
-#PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/releases/download/v$(PKG_VERSION)/
-#PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand.git
-#PKG_SOURCE_VERSION:=07b5b0331af6de4174dab2c02bf260ee9625452a
-
-include $(INCLUDE_DIR)/host-build.mk
-
-
-define Host/Compile
-	$(MAKE) -C $(HOST_BUILD_DIR)
-endef
-
-define Host/Install
-	$(CP) \
-		$(HOST_BUILD_DIR)/ltq-nand \
-		$(STAGING_DIR_HOST)/bin/
-endef
-
-$(eval $(call HostBuild))
-

mqtt-ciotc/Makefile

@@ -1,37 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=mqtt-ciotc
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=00da3fb1f1691d836037dc4d93e38d0835ba46a4
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifilife-testbed.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mqtt-ciotc
-	CATEGORY:=Utilities
-	DEPENDS:=+libjwt +lib-paho-mqtt +libopenssl +libubox +ubus +libblobmsg-json
-	TITLE:=mqtt google iot clinet
-endef
-
-define Package/mqtt-ciotc/description
-	mqtt google iot client
-endef
-
-define Package/mqtt-ciotc/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mqtt_ciotc $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,mqtt-ciotc))

mqtt-ciotc/files/etc/config/mqtt_ciotc

@@ -1,3 +0,0 @@
-config certs 'certs'
-	option private '/etc/mqtt-ciotc/rsa_private.pem'
-	option root '/etc/mqtt-ciotc/roots.pem'

mqtt-ciotc/files/etc/init.d/mqtt_ciotc

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=96
-STOP=10
-PROG=/sbin/mqtt_ciotc
-
-USE_PROCD=1
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	config_load mqtt_ciotc
-	config_get private certs private
-	config_get root certs root
-
-	[ -n $private ] && procd_append_param command --private-cert $private
-	[ -n $root ] && procd_append_param command --root-cert $root
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service()
-{
-	service_stop ${PROG}
-}
-
-reload_service() {
-#	procd_send_signal wifilife # use SIGHUP
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger "mqtt_ciotc"
-}

ndt/Makefile

@@ -1,33 +0,0 @@
-#
-# This is free software, See /COPYRIGHT for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ndt
-PKG_VERSION:=3.6.4
-PKG_RELEASE:=3
-
-PKG_BUILD_DIR:=${BUILD_DIR}/ndt-$(PKG_VERSION)
-PKG_SOURCE:=ndt-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://software.internet2.edu/sources/ndt
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ndt
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +zlib
-	TITLE:=Network Testing Tool
-endef
-
-define Build/Compile/Default
-	$(MAKE) -C $(PKG_BUILD_DIR)
-endef
-
-define Package/ndt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(CP) $(PKG_BUILD_DIR)/src/web100clt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ndt))
-

netmode/Makefile

@@ -3,7 +3,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=netmode
 PKG_VERSION:=0.2.0
 
-PKG_SOURCE_VERSION:=9fa23664b3bdd963e4556f5921c9f9be1c9c578f
+PKG_SOURCE_VERSION:=82fd6c196a3b990e105cef867a69ce52979b27fa
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/netmoded
 

netmode/files/etc/config/netmode

@@ -4,6 +4,6 @@ config mode 'setup'
         option curmode 'routed'
 
 config tools 'tools'
-	option wificontrol 0
+	option wificontrol 1
 	option arp_discovery 1
 

netmode/files/etc/hotplug.d/iface/01-netmode-handler

@@ -2,9 +2,6 @@
 
 [ "$INTERFACE" != "wan" ] && exit
 
-automode="$(uci -q get netmode.setup.automode)"
-[ "$automode" == "0" ] && exit
-
 . /lib/functions.sh
 . /lib/functions/network.sh
 . /lib/functions/netmode.sh

netmode/files/etc/netmodes/bridged/wireless

@@ -18,7 +18,7 @@ config wifi-device 'wl0'
 	option bandwidth '80'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -60,7 +60,7 @@ config wifi-device 'wl1'
 	option bandwidth '20'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/post/apply_wet_cfg.sh

@@ -1,38 +0,0 @@
-#if wet in wireless config and SSID nad KEY was saved for it, apply to config
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-parse_wet_json()
-{
-	local interface=$1
-	local mode key encryption ssid connect_bssid
-
-	config_get mode $interface mode
-	[ "$mode" = "wet" ] || return
-
-	json_load "$(cat /tmp/netmodecfg)" 2> /dev/null
-	json_get_var ssid ssid
-	json_get_var key key
-	json_get_var encryption encryption
-	json_get_var connect_bssid connect_bssid
-
-	uci -q set wireless.$1.key="$key"
-	uci -q set wireless.$1.encryption="$encryption"
-	uci -q set wireless.$1.ssid="$ssid"
-	uci -q set wireless.$1.connect_bssid="$connect_bssid"
-	uci commit wireless
-}
-
-apply_wet_cfg()
-{
-	[ -f /tmp/netmodecfg ] || return
-
-	config_load wireless
-	config_foreach parse_wet_json "wifi-iface"
-
-	rm /tmp/netmodecfg 2> /dev/null
-}
-
-apply_wet_cfg

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/save_wet_cfg.sh

@@ -1,38 +0,0 @@
-#if mode wet in wireless config has SSID Key, save them
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-parse_wet_cfg()
-{
-	local interface=$1
-	local mode key encryption ssid connect_bssid
-
-	config_get mode $interface mode
-	[ "$mode" = "wet" ] || return
-
-	config_get ssid $interface ssid
-	config_get key $interface key
-	config_get encryption $interface encryption
-	config_get connect_bssid $interface connect_bssid
-
-	[ -n "$key" ] || return
-	[ -n "$encryption" ] || return
-
-	json_init
-	json_add_string "ssid" "$ssid"
-	json_add_string "key" "$key"
-	json_add_string "encryption" "$encryption"
-	json_add_string "connect_bssid" "$connect_bssid"
-
-	echo "`json_dump`" > /tmp/netmodecfg
-}
-
-save_wet_cfg()
-{
-	config_load wireless
-	config_foreach parse_wet_cfg "wifi-iface"
-}
-
-save_wet_cfg

netmode/files/etc/netmodes/routed_brcm/wireless

@@ -18,7 +18,7 @@ config wifi-device 'wl0'
 	option bandwidth '80'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -60,7 +60,7 @@ config wifi-device 'wl1'
 	option bandwidth '20'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'

netmode/files/etc/netmodes/routed_mtk/wireless

@@ -18,7 +18,6 @@ config wifi-device  ra0
 	option hwmode   auto
 	option htmode   HT20
 	option country 'DE'
-	option scantimer '60'
 
 config wifi-iface
 	option device   ra0
@@ -38,7 +37,6 @@ config wifi-device  rai0
 	option htmode   VHT80
 	option country 'DE'
 	option beamforming 1
-	option scantimer '60'
 
 config wifi-iface
 	option device   rai0

netmode/files/lib/functions/netmode.sh

@@ -180,7 +180,6 @@ switch_netmode() {
 	run_netmode_scripts $curmode "pre"
 
 	logger -s -p user.info -t $0 "[netmode] Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
-
 	for file in $(ls /etc/netmodes/$curmode/); do
 		case "$file" in
 			DETAILS|scripts) continue ;;
@@ -189,9 +188,6 @@ switch_netmode() {
 	done
 	sync
 
-	#commit owsd to reload all init.d scripts dependent on its config
-	ubus call uci commit '{"config":"owsd"}'
-
 	local reboot=$(uci -q get netmode.$curmode.reboot)
 
 	if [ "$reboot" != "0" ]; then
@@ -386,9 +382,7 @@ populate_netmodes() {
 			if json_select acl; then
 				_i=1
 				while json_get_var user $_i; do
-					uci del_list netmode.$mode._access_r="$user"
 					uci del_list netmode.$mode._access_w="$user"
-					uci add_list netmode.$mode._access_r="$user"
 					uci add_list netmode.$mode._access_w="$user"
 					_i=$((_i+1))
 				done

owsd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2018 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -10,9 +10,10 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=f0eedeb6fd061edf3784d6bf86fa60b176bf3fe7
+PKG_SOURCE_VERSION:=b3f52463a50d56af80bfd8b3f63960885379f150
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS

owsd/files/owsd.init

@@ -308,10 +308,10 @@ start_service() {
 	procd_close_instance
 }
 
-#stop_service()
-#{
-#	service_stop ${PROG}
-#}
+stop_service()
+{
+	service_stop ${PROG}
+}
 
 reload_service() {
         stop

paho-mqtt-c/Makefile

@@ -1,43 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=lib-paho-mqtt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=9f715d0862a8e16099b5837c4e53a1bf6a6a0675
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/eclipse/paho.mqtt.c.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/lib-paho-mqtt
-	CATEGORY:=Libraries
-	DEPENDS:=+libopenssl
-	TITLE:=package for mqtt stuff
-endef
-
-
-define Package/lib-paho-mqtt/description
-	a library
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/ $(1)/usr/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-define	Package/lib-paho-mqtt/install
-	$(INSTALL_DIR) $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,lib-paho-mqtt))

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=c1598f9dc8f2d67fbfcfd831052f40b3cde3d19c
+PKG_SOURCE_VERSION:=fe43108d986a02d3a14f079d58bfa666c1089471
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
 

questd/Makefile

@@ -1,14 +1,14 @@
 #
-# Copyright (C) 2013-2019 iopsys
+# Copyright (C) 2013 Inteno
 #
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=4.0.1
+PKG_VERSION:=3.1.40
 
-PKG_SOURCE_VERSION:=d19501b6f80ef649b2ffd2f87132df885ce4581f
+PKG_SOURCE_VERSION:=7a0a7427d339736e3ee555e816d40c985651632c
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
 
@@ -27,7 +27,7 @@ else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
 QUESTD_TARGET:=-DIOPSYS_MARVELL
 else ifeq ($(CONFIG_TARGET_intel_mips),y)
 # BUG FIXME the Intel mips target is not handled in questd this is just to get it to compile
-QUESTD_TARGET:=-DIOPSYS_INTEL
+QUESTD_TARGET:=-DIOPSYS_BROADCOM
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
 QUESTD_TARGET:=-DIOPSYS_MEDIATEK
 QUESTD_CFLAGS:=\

rulengd/Makefile

@@ -1,20 +1,21 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2018 Inteno
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=rulengd
-PKG_VERSION:=1.1.0
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_PARALLEL:=1
 PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/rulengd.git
-PKG_SOURCE_VERSION:=63569245b62d90d3106cc826f2d2b18f51c0b885
+PKG_SOURCE_VERSION:=99881f39232154530ac129dc2109d78963017ad1
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 

samba3/files/samba.init

@@ -11,11 +11,6 @@ useradd()
 	local password
 	config_get user $1 user
 	config_get password $1 password
-
-        filter="0A;5C 6E"
-        [ "$(hex_filter "$user" "$filter" 1)" = "" ] || return
-        [ "$(hex_filter "$password" "$filter" 1)" = "" ] || return
-
 	if ! $(grep -rq "^$user:" /etc/passwd) ; then
 		echo "adding user $user"
 		adduser $user -s /bin/false -D -H -h /mnt/$user -g "samba,pass=$password" && smbpasswd $user $password
@@ -56,46 +51,6 @@ purgepasswd()
 	done
 }
 
-hex_filter() {
-	local string=$1
-	local hex_chars=$2
-	local wc_max=$3
-	local wc_tot=0
-
-	if [ -z "$string" -o -z "$hex_chars" -o -z "$wc_max" ]
-	then
-		return;
-	fi
-
-	dump=$(echo "$string" | hexdump -v -e '32/1 "%02X ""\n"')
-
-	IFS=';'
-	for i in $hex_chars;
-	do
-		local filtered
-
-		IFS=' '
-		filtered=${dump//$i/}
-
-		set -- $i
-		divider=$#
-
-		set -- $dump
-		start=$#
-
-		set -- $filtered
-		end=$#
-
-		wc=$((start-end))
-		wc=$((wc/divider))
-
-		[ $wc -eq 0 ] || wc_tot=$((wc_tot+wc))
-		IFS=';'
-	done
-
-	[ $wc_tot -gt $wc_max ] && echo "corrupt"
-}
-
 smb_header() {
 	local interface
 	config_get interface $1 interface
@@ -125,12 +80,11 @@ smb_header() {
 	config_get description $1 description "Samba on ${hostname:-OpenWrt}"
 	config_get charset     $1 charset     "UTF-8"
 
-	filter="0A;5C 6E"
-	[ "$(hex_filter "$name" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$workgroup" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$description" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$interfaces" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$charset" "$filter" 1)" = "" ] || exit
+	name=`echo -e "$name" | head -1`
+	workgroup=`echo -e "$workgroup" | head -1`
+	description=`echo -e "$description" | head -1`
+	interfaces=`echo -e "$interfaces" | head -1`
+	charset=`echo -e "$charset" | head -1`
 
 	mkdir -p /var/etc
 	sed -e "s#|NAME|#$name#g" \
@@ -190,22 +144,13 @@ smb_add_share() {
 	path=$(readlink -f $path)
 	[ "${path:0:4}" == "/mnt" ] || path="/mnt/"
 
-	filter="0A;5C 6E"
-	[ "$(hex_filter "$name" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$users" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$read_only" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$guest_ok" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$create_mask" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$dir_mask" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$browseable" "$filter" 1)" = "" ] || return
-
-	echo -e "\n[$name]\n\tpath = $path" >> /var/etc/smb.conf
-	[ -n "$users" ] && echo -e "\tvalid users = $users" >> /var/etc/smb.conf
-	[ -n "$read_only" ] && echo -e "\tread only = $read_only" >> /var/etc/smb.conf
-	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" >> /var/etc/smb.conf
-	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" >> /var/etc/smb.conf
-	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" >> /var/etc/smb.conf
-	[ -n "$browseable" ] && echo -e "\tbrowseable = $browseable" >> /var/etc/smb.conf
+	echo -e "\n[$name]\n\tpath = ${path%%\\n*}" >> /var/etc/smb.conf
+	[ -n "$users" ] && echo -e "\tvalid users = $users" | head -1 >> /var/etc/smb.conf
+	[ -n "$read_only" ] && echo -e "\tread only = $read_only" | head -1 >> /var/etc/smb.conf
+	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" | head -1 >> /var/etc/smb.conf
+	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" | head -1 >> /var/etc/smb.conf
+	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" | head -1 >> /var/etc/smb.conf
+	[ -n "$browseable" ] && echo -e "\tbrowseable = $browseable" | head -1 >> /var/etc/smb.conf
 }
 
 start_service() {

syslog-ng3/Makefile

@@ -0,0 +1,72 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=syslog-ng
+PKG_VERSION:=3.0.5
+PKG_RELEASE:=5
+
+PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/$(PKG_VERSION)/source/
+PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
+PKG_MD5SUM:=28f0d9ff2243b330e8cd6311ef9b2f12
+
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_IPV6 \
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/syslog-ng3
+  SECTION:=admin
+  CATEGORY:=Administration
+  DEPENDS:=+libpcre +glib2 +libeventlog +libopenssl +libwrap +libpthread +librt +zlib +libdbi
+  TITLE:=A powerful syslog daemon
+  URL:=http://www.balabit.com/network-security/syslog-ng/opensource-logging-system/
+endef
+
+define Package/syslog-ng3/description
+  syslog-ng reads and logs messages to the system console, log
+  files, other machines and/or users as specified by its
+  configuration file.
+endef
+
+define Package/syslog-ng3/conffiles
+/etc/syslog-ng.conf
+endef
+
+define Build/Configure
+	$(SED) 's,-I/usr/include,,' $(PKG_BUILD_DIR)/configure
+	$(Build/Configure/Default)
+endef
+
+CONFIGURE_ARGS +=  \
+	$(call autoconf_bool,CONFIG_IPV6,ipv6) \
+	--disable-dependency-tracking \
+	--enable-tcp-wrapper \
+	--disable-glibtest \
+	--disable-spoof-source \
+	--disable-sql \
+	--enable-prce \
+	--disable-linux-caps \
+
+TARGET_CPPFLAGS += \
+	-I$(STAGING_DIR)/usr/include/eventlog
+
+CONFIGURE_VARS += \
+	LIBDBI_CFLAGS="-I$(STAGING_DIR)/usr/include"
+
+define Package/syslog-ng3/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/syslog-ng $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/syslog-ng.init $(1)/etc/init.d/syslog-ng
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DATA) ./files/syslog-ng.conf $(1)/etc
+endef
+
+$(eval $(call BuildPackage,syslog-ng3))

syslog-ng3/files/syslog-ng.conf

@@ -0,0 +1,37 @@
+@version:3.0
+
+options {
+	chain_hostnames(no);
+	create_dirs(yes);
+	flush_lines(0);
+	keep_hostname(yes);
+	log_fifo_size(256);
+	log_msg_size(1024);
+	stats_freq(0);
+	flush_lines(0);
+	use_fqdn(no);
+};
+
+source src {
+	internal();
+	unix-stream("/dev/log");
+};
+
+source net {
+	udp(ip(0.0.0.0) port(514));
+};
+
+source kernel {
+        file("/proc/kmsg" program_override("kernel"));
+};
+
+destination messages {
+	file("/var/log/messages");
+};
+
+log {
+	source(src);
+	source(net);
+        source(kernel);
+	destination(messages);
+};

syslog-ng3/files/syslog-ng.init

@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2011 OpenWrt.org
+
+START=50
+
+SERVICE_USE_PID=1
+
+start() {
+	[ -f /etc/syslog-ng.conf ] || return 1
+	service_start /usr/sbin/syslog-ng
+}
+
+stop() {
+	service_stop /usr/sbin/syslog-ng
+}
+
+reload() {
+	service_reload /usr/sbin/syslog-ng
+}

syslog-ng3/patches/001-fix-libconv_so_2-not-found-error

@@ -0,0 +1,12 @@
+--- a/configure
++++ b/configure
+@@ -7357,6 +7357,9 @@ dynamic_threads () {
+ 	esac
+ }
+ 
++GLIB_LIBS="-Wl,-rpath-link=$STAGING_DIR/usr/lib/libiconv-full/lib $GLIB_LIBS"
++LIBS="-Wl,-rpath-link=$STAGING_DIR/usr/lib/libiconv-full/lib $LIBS"
++
+ case "$ostype" in
+ 	FreeBSD)
+ 		GLIB_LIBS="$GLIB_LIBS -lintl"

topologyd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2013 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=topologyd
 PKG_VERSION:=0.1
 
-PKG_SOURCE_VERSION:=23b812bb512189487484182ab736e957d54da9f3
+PKG_SOURCE_VERSION:=b520fe65d2469ff52cc70328fce753f67cf998e5
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/topologyd.git
 

topologyd/files/etc/init.d/topologyd

@@ -17,7 +17,7 @@ start_service() {
 	fi
 
 	procd_set_param respawn
-#	procd_set_param stdout 1
+	procd_set_param stdout 1
 	procd_set_param stderr 1
 	procd_close_instance
 }

uboot/Makefile

@@ -14,7 +14,7 @@ PKG_SOURCE_PROTO:=git
 
 ifdef CONFIG_TARGET_intel_mips
 PKG_SOURCE_URL:=git@dev.iopsys.eu:intel/uboot.git
-PKG_SOURCE_VERSION:=0ef53f269c27f8e736fd30fd1a874159f70c76bf
+PKG_SOURCE_VERSION:=b3bc3af5831f14d9cd4d983522bc45a1fd9fa26c
 else
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/uboot.git
 PKG_SOURCE_VERSION:=3ef2ba866a99205496e0ce01935c89a1778d9b85
@@ -59,30 +59,21 @@ define uboot/grx500
   TITLE:=U-Boot for the grx
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=10
+  PKG_RELEASE:=5
 endef
 
-# obsolete: no longer supported
 define uboot/grx500_speedport_smart3
   TITLE:=U-Boot for the Speedport Smart3
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=7
-endef
-
-define uboot/grx500_norrland
-  TITLE:=U-Boot for Norrland Board
-  UBOOT_IMG:=u-boot-nand.bin
-  DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=10
+  PKG_RELEASE:=5
 endef
 
 UBOOTS := \
 	ex400 \
 	sdx810_ap \
 	grx500 \
-	grx500_speedport_smart3 \
-	grx500_norrland
+	grx500_speedport_smart3
 
 define Package/uboot/template
 define Package/uboot-$(1)
@@ -104,14 +95,13 @@ ifdef BUILD_VARIANT
 $(eval $(call uboot/$(BUILD_VARIANT)))
 UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
 UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
-UBOOT_IOPSYS_VERSION:=$(PKG_RELEASE)
 endif
 
 define Build/Configure
 	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
 		$(UBOOT_CONFIG)_config
 
-	$(SED) "s,CONFIG_INTENO_MAJOR=\"0\",CONFIG_INTENO_MAJOR=\"$(UBOOT_IOPSYS_VERSION)\"," $(PKG_BUILD_DIR)/.config
+	$(SED) "s,CONFIG_INTENO_MAJOR=\"0\",CONFIG_INTENO_MAJOR=\"$(PKG_RELEASE)\"," $(PKG_BUILD_DIR)/.config
 
 	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
 		oldconfig
@@ -124,13 +114,8 @@ define Build/Compile
 		CROSS_COMPILE=$(TARGET_CROSS) env
 endef
 
-# don't install /etc/init.d/uboot for intel-mips as it's not needed
 define Package/uboot/install/default
-	$(INSTALL_DIR) $$(1)/lib/upgrade
-	$(CP) ./files/uboot-upgrade $$(1)/lib/upgrade/
-	$(if $(CONFIG_TARGET_intel_mips), ,$(INSTALL_DIR) $$(1)/etc/init.d)
-	$(if $(CONFIG_TARGET_intel_mips), ,$(CP) ./files/uboot $$(1)/etc/init.d/)
-
+	$(CP) ./files/* $$(1)/
 	$(INSTALL_DIR) $(BIN_DIR)/$(TARGET)
 	$(INSTALL_DIR) $$(1)/boot
 	$(CP) \

uboot/files/etc/init.d/uboot

@@ -1,6 +1,10 @@
+#!/bin/sh /etc/rc.common
+
+START=50
 
 . /usr/share/libubox/jshn.sh
 
+
 sanity_check_env(){
 
     # make sure iboot is used to start board, but only if verify_boot != 1
@@ -22,35 +26,25 @@ sanity_check_env(){
     fw_setenv baudrate 115200
 }
 
-do_uboot_upgrade(){
+uboot_upgrade(){
     local u_ver
     echo "doing upgrade of u-boot old version $cur_Major.$cur_Minor new version $Major.$Minor"
     mtd erase /dev/mtd0
-    mtd write $1 /dev/mtd0
+    mtd write /boot/uboot.img /dev/mtd0
     u_ver=$(strings  /dev/mtd0 | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb)
     [ -n "$u_ver" ] && fw_setenv uboot_inteno_version "$u_ver"
     sanity_check_env
 }
 
 
-# Return:
-# 0: update is successfull
-# 1: update is not needed
-# 2: error occured
-uboot_upgrade() {
-    [ ! -f $1 ] && return 2
-
+start() {
     iver=$(fw_printenv -n uboot_inteno_version 2>/dev/null)
 
-    # Fixup improper json string for major and minor key.
-    # this adds the missing "
-    iver=$(echo $iver | sed -e 's/{Major:/{"Major":/' | sed -e 's/,Minor:/,"Minor":/')
-    
     if [ -z "$iver" ]
     then
 	# if this variable is not set by u-boot the u-boot version is too old.
-	do_uboot_upgrade $1
-	return 0
+	uboot_upgrade
+	return
     fi
 
     # read in current version into Major Minor variables
@@ -65,7 +59,7 @@ uboot_upgrade() {
     cur_Minor=$Minor
 
     # read in new uboot version into Major Minor variables
-    json_load $(strings $1 | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb |sed -e 's/938f0820-2ffb-11e7-bbc9-2f21351ee6fb: //')
+    json_load $(strings /boot/uboot.img | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb |sed -e 's/938f0820-2ffb-11e7-bbc9-2f21351ee6fb: //')
     json_get_vars Major Minor
 
 #    echo "Major $Major"
@@ -73,15 +67,14 @@ uboot_upgrade() {
     
     if [ $Major -gt $cur_Major ]
     then
-	do_uboot_upgrade $1
-	return 0
+	uboot_upgrade
+	return
     fi
 
     if [ $Major -eq $cur_Major -a $Minor -gt $cur_Minor ]
     then
-	do_uboot_upgrade $1
-	return 0
+	uboot_upgrade
+	return
     fi
-
-    return 1
 }
+

uboot/files/uboot

@@ -1,8 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=50
-
-start() {
-	. /lib/upgrade/uboot-upgrade
-	uboot_upgrade /boot/uboot.img
-}

usp/Makefile

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2019 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=uspd
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=64f39a5041da3d6c0a45cbc901dea3bd062d96fe
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/uspd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR069 extention for USP
-  DEPENDS:=+libubox +ubus +icwmp-curl
-endef
-
-define Package/uspd/description
- Ubus based backend for TR-369/USP which can be used by other USP agents
- running on top of it.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
-
-#define Build/Prepare
-#        $(CP) -rf ./uspd/* $(PKG_BUILD_DIR)/
-#endef
-
-define Package/uspd/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/uspd.init $(1)/etc/init.d/uspd
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uspd $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,uspd))

usp/files/uspd.init

@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=94
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/uspd
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}

voice-client/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2014 iopsys
+# Copyright (C) 2014 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -11,19 +11,6 @@ PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-VOICE_LIB:=broadcom.sh
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-VOICE_LIB:=broadcom.sh
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-VOICE_LIB:=intel.sh
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-VOICE_LIB:=broadcom.sh
-else
-$(info (UNEXPECTED CONFIG TARGET))
-VOICE_LIB:=broadcom.sh
-endif
-
 define Package/voice-client
   SUBMENU:=Telephony
   SECTION:=net
@@ -45,26 +32,7 @@ define Build/Compile
 endef
 
 define Package/voice-client/install
-	$(CP) ./files/etc $(1)/
-	$(CP) ./files/sbin $(1)/
-	$(CP) ./files/usr $(1)/
-	mkdir -p $(1)/lib/voice
-	$(CP) ./files/lib/cw.sh $(1)/lib/.
-	$(CP) ./files/lib/voice/$(VOICE_LIB) $(1)/lib/voice/voicelib.sh
-
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	sed -i \
-	-e 's/brcm/tapi/g' \
-	-e 's/BRCM/TAPI/g' \
-	-e 's/broadcom/intel/g' \
-	$(1)/etc/config/voice_client \
-	$(1)/etc/asterisk_templates/*
-	sed -i \
-	-e '/echo_cancel/d' \
-	-e "/config.*tel_advanced.*TEL/a \        option 'echo_cancel' '1'" \
-	$(1)/etc/config/voice_client
-
-endif
+	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,voice-client))

voice-client/files/etc/asterisk_templates/acl.conf.TEMPLATE

@@ -1,80 +0,0 @@
-;
-; Named Access Control Lists (ACLs)
-;
-; A convenient way to share acl definitions
-;
-; This configuration file is read on startup
-;
-; CLI Commands
-; -----------------------------------------------------------
-;   acl show                         Show all named ACLs configured
-;   acl show <name>                  Show contents of a particular named ACL
-;   reload acl                       Reload configuration file
-;
-; Any configuration that uses ACLs which has been made to be able to use named
-; ACLs will specify a named ACL with the 'acl' option in its configuration in
-; a similar fashion to the usual 'permit' and 'deny' options. Example:
-; acl=my_named_acl
-;
-; Multiple named ACLs can be applied by either comma separating the arguments or
-; just by adding additional ACL lines. Example:
-; acl=my_named_acl
-; acl=my_named_acl2
-;
-; or
-;
-; acl=my_named_acl,my_named_acl2
-;
-; ACLs specified by name are evaluated independently from the ACL specified via
-; permit/deny. In order for an address to pass a given ACL, it must pass both
-; the ACL specified by permit/deny for a given item as well as any named ACLs
-; that were specified.
-;
-;[example_named_acl1]
-;deny=0.0.0.0/0.0.0.0
-;permit=209.16.236.0
-;permit=209.16.236.1
-;
-;[example_named_acl2]
-;permit=0.0.0.0/0.0.0.0
-;deny=10.24.20.171
-;deny=10.24.20.103
-;deny=209.16.236.1
-;
-; example_named_acl1 above shows an example of whitelisting. When whitelisting, the
-; named ACLs should follow a deny that blocks everything (like deny=0.0.0.0/0.0.0.0)
-; The following example explains how combining the ACLs works:
-; <in another configuration>
-; [example_item_with_acl]
-; acl=example_named_acl1
-; acl=example_named_acl2
-;
-; Suppose 209.16.236.0 tries to communicate and the ACL for that example is applied to it...
-; First, example_named_acl1 is evaluated. The address is allowed by that ACL.
-; Next, example_named_acl2 is evaluated. The address isn't blocked by example_named_acl2
-; either, so it passes.
-;
-; Suppose instead 209.16.236.1 tries to communicate and the same ACL is applied.
-; First, example_named_acl1 is evaluated and the address is allowed.
-; However, it is blocked by example_named_acl2, so the address is blocked from the combined
-; ACL.
-;
-; Similarly, the permits/denies in specific configurations that make up an ACL definition
-; are also treated as a separate ACL for evaluation. So if we change the example above to:
-; <in another configuration>
-; [example_item_with_acl]
-; acl=example_named_acl1
-; acl=example_named_acl2
-; deny=209.16.236.0
-;
-; Then 209.16.236.0 will be rejected by the non-named component of the combined ACL even
-; though it passes the two named components.
-;
-;
-; Named ACLs can use ipv6 addresses just like normal ACLs.
-;[ipv6_example_1]
-;deny = ::
-;permit = ::1/128
-;
-;[ipv6_example_2]
-;permit = fe80::21d:bad:fad:2323

voice-client/files/etc/asterisk_templates/brcm_line.TEMPLATE

@@ -6,7 +6,7 @@ autodial_timeoutmsec=|AUTODIAL_TIMEOUT|
 dialtone_timeoutmsec=|DIALTONE_TIMEOUT|
 context=|CONTEXT|
 context_direct=|CONTEXT|-direct
-dialtone_extension_hint_context=|LINE_NAME|_dialtone
+dialtone_extension_hint_context=brcm_dialtone
 dialtone_extension_hint=|DIALTONE_EXTENSION_HINT|
 callwaiting=|CALLWAITING|
 clir=|CLIR|

voice-client/files/etc/asterisk_templates/cdr_custom.conf.TEMPLATE

@@ -1,14 +0,0 @@
-;
-; Mappings for custom config file
-;
-; To get your CSV output in a format tailored to your liking, uncomment the
-; following lines and look for the output in the cdr-custom directory (usually
-; in /var/log/asterisk).  Depending on which mapping you uncomment, you may see
-; Master.csv, Simple.csv, or both.
-;
-;[mappings]
-;Master.csv => ${CSV_QUOTE(${CDR(clid)})},${CSV_QUOTE(${CDR(src)})},${CSV_QUOTE(${CDR(dst)})},${CSV_QUOTE(${CDR(dcontext)})},${CSV_QUOTE(${CDR(channel)})},${CSV_QUOTE(${CDR(dstchannel)})},${CSV_QUOTE(${CDR(lastapp)})},${CSV_QUOTE(${CDR(lastdata)})},${CSV_QUOTE(${CDR(start)})},${CSV_QUOTE(${CDR(answer)})},${CSV_QUOTE(${CDR(end)})},${CSV_QUOTE(${CDR(duration)})},${CSV_QUOTE(${CDR(billsec)})},${CSV_QUOTE(${CDR(disposition)})},${CSV_QUOTE(${CDR(amaflags)})},${CSV_QUOTE(${CDR(accountcode)})},${CSV_QUOTE(${CDR(uniqueid)})},${CSV_QUOTE(${CDR(userfield)})},${CDR(sequence)}
-;
-; High Resolution Time for billsec and duration fields
-;Master.csv => ${CSV_QUOTE(${CDR(clid)})},${CSV_QUOTE(${CDR(src)})},${CSV_QUOTE(${CDR(dst)})},${CSV_QUOTE(${CDR(dcontext)})},${CSV_QUOTE(${CDR(channel)})},${CSV_QUOTE(${CDR(dstchannel)})},${CSV_QUOTE(${CDR(lastapp)})},${CSV_QUOTE(${CDR(lastdata)})},${CSV_QUOTE(${CDR(start)})},${CSV_QUOTE(${CDR(answer)})},${CSV_QUOTE(${CDR(end)})},${CSV_QUOTE(${CDR(duration,f)})},${CSV_QUOTE(${CDR(billsec,f)})},${CSV_QUOTE(${CDR(disposition)})},${CSV_QUOTE(${CDR(amaflags)})},${CSV_QUOTE(${CDR(accountcode)})},${CSV_QUOTE(${CDR(uniqueid)})},${CSV_QUOTE(${CDR(userfield)})},${CDR(sequence)}
-;Simple.csv => ${CSV_QUOTE(${EPOCH})},${CSV_QUOTE(${CDR(src)})},${CSV_QUOTE(${CDR(dst)})}

voice-client/files/etc/asterisk_templates/cel.conf.TEMPLATE

@@ -1,116 +0,0 @@
-;
-; Asterisk Channel Event Logging (CEL)
-;
-
-; Channel Event Logging is a mechanism to provide fine-grained event information
-; that can be used to generate billing information. Such event information can
-; be recorded to various backend modules.
-;
-
-[general]
-
-; CEL Activation
-;
-; Use the 'enable' keyword to turn CEL on or off.
-;
-; Accepted values: yes and no
-; Default value:   no
-
-;enable=yes
-
-; Application Tracking
-;
-; Use the 'apps' keyword to specify the list of applications for which you want
-; to receive CEL events.  This is a comma separated list of Asterisk dialplan
-; applications, such as Dial, Queue, and Park.
-;
-; Accepted values: A comma separated list of Asterisk dialplan applications
-; Default value:   none
-;
-; Note: You may also use 'all' which will result in CEL events being reported
-;       for all Asterisk applications.  This may affect Asterisk's performance
-;       significantly.
-
-apps=dial,park
-
-; Event Tracking
-;
-; Use the 'events' keyword to specify the list of events which you want to be
-; raised when they occur.  This is a comma separated list of the values in the
-; table below.
-;
-; Accepted values: A comma separated list of one or more of the following:
-;  ALL              -- Generate entries on all events
-;  CHAN_START       -- The time a channel was created
-;  CHAN_END         -- The time a channel was terminated
-;  ANSWER           -- The time a channel was answered (ie, phone taken off-hook)
-;  HANGUP           -- The time at which a hangup occurred
-;  BRIDGE_ENTER       -- The time a channel was connected into a conference room
-;  BRIDGE_EXIT        -- The time a channel was removed from a conference room
-;  APP_START        -- The time a tracked application was started
-;  APP_END          -- the time a tracked application ended
-;  PARK_START       -- The time a call was parked
-;  PARK_END         -- Unpark event
-;  BLINDTRANSFER    -- When a blind transfer is initiated
-;  ATTENDEDTRANSFER -- When an attended transfer is initiated
-;  PICKUP           -- This channel picked up the specified channel
-;  FORWARD          -- This channel is being forwarded somewhere else
-;  LINKEDID_END     -- The last channel with the given linkedid is retired
-;  USER_DEFINED     -- Triggered from the dialplan, and has a name given by the
-;                      user
-;  LOCAL_OPTIMIZE   -- A local channel pair is optimizing away.
-;
-; Default value: none
-;                (Track no events)
-
-events=APP_START,CHAN_START,CHAN_END,ANSWER,HANGUP,BRIDGE_ENTER,BRIDGE_EXIT
-
-; Date Format
-;
-; Use the 'dateformat' keyword to specify the date format used when CEL events
-; are raised.
-;
-; Accepted values: A strftime format string (see man strftime)
-;
-; Example: "%F %T"
-;  -> This gives the date and time in the format "2009-06-23 17:02:35"
-;
-; If this option is not specified, the default format is "<seconds>.<microseconds>"
-; since epoch.  The microseconds field will always be 6 digits in length, meaning it
-; may have leading zeros.
-;
-;dateformat = %F %T
-
-;
-; Asterisk Manager Interface (AMI) CEL Backend
-;
-[manager]
-
-; AMI Backend Activation
-;
-; Use the 'enable' keyword to turn CEL logging to the Asterisk Manager Interface
-; on or off.
-;
-; Accepted values: yes and no
-; Default value:   no
-;enabled=yes
-
-; Use 'show_user_defined' to put "USER_DEFINED" in the EventName header,
-; instead of (by default) just putting the user defined event name there.
-; When enabled the UserDefType header is added for user defined events to
-; provide the user defined event name.
-;
-;show_user_defined=yes
-
-;
-; RADIUS CEL Backend 
-;
-[radius]
-;
-; Log date/time in GMT
-;usegmtime=yes
-;
-; Set this to the location of the radiusclient-ng configuration file
-; The default is /etc/radiusclient-ng/radiusclient.conf
-;radiuscfg => /usr/local/etc/radiusclient-ng/radiusclient.conf
-;