update hash

dectmngr2/Makefile

@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.3.0
+PKG_VERSION:=1.2.0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=637aa9ef231f81d195f7a1b67c70af445ade7fee
+PKG_SOURCE_VERSION:=0c029ed2486342e7e7687631b702d5c743f3c41a
 PKG_NAME:=dectmngr2
 
 
@@ -42,7 +42,6 @@ define Package/dectmngr2/install
 	$(INSTALL_DIR) $(1)/etc/dect/
 	$(INSTALL_DIR) $(1)/etc/config/
 	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
@@ -50,7 +49,6 @@ define Package/dectmngr2/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
 	$(CP) ./files/dect.config $(1)/etc/config/dect
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 endef
 
 $(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-
-# Workaround for product DG400 which has an
-# incorrect value in nvram from factory.
-
-if [ -e "/proc/nvram/BoardId" ]; then
-	boardid=$(cat /proc/nvram/BoardId)
-	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
-
-	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
-		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
-
-		db -q batch <<-EOT
-			set hw.board.hasDect=1
-			commit hw.board
-		EOT
-	fi
-fi
-
-
-exit 0
-

dslmngr/Makefile

@@ -1,78 +0,0 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dslmngr
-PKG_VERSION:=1.0.0
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=be5b0d0c0a1c2abd335aaf19f01f63284d8cc285
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-define Package/dslmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +easy-soc-libs
-endef
-
-define Package/dslmngr/description
- This package can be used to configure and provide status about
- the XDSL subsystem through UBUS.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Build/Compile
-	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
-endef
-
-define Package/dslmngr/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,dslmngr))

easy-qos/Makefile

@@ -1,37 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-qos
-PKG_VERSION:=1.0
-PKG_RELEASE:=0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-qos
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Easy QoS
-endef
-
-define Package/easy-qos/description
-	This package contains Easy QoS utitie
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/easy-qos/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
-	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
-endef
-
-$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -1 +0,0 @@
-/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -1,157 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions/iopsys-repeated-macs.sh
-
-START=99
-USE_PROCD=1
-
-log() {
-	echo "${@}"|logger -t easy_qos.ebtable -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	while [ -n "${rule}" ]; do
-		exec_log ebtables -t broute -D BROUTING ${rule}
-		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	done
-}
-
-create_rule() {
-	local protocol=$1; shift
-	local mac=$1; shift
-	local mark="0x$1"; shift
-	local forward_port=$1;
-	local cmd="";
-	local protocol_number
-
-	cmd="-j mark --mark-or ${mark}";
-	if [ -n "${forward_port}" ]; then
-		cmd="--ip-destination-port ${forward_port} ${cmd}";
-	fi
-	
-	case "${protocol}" in
-		"tcp")
-			protocol_number=6;;
-		"udp")
-			protocol_number=17;;
-		"dccp")
-			protocol_number=33;;
-		"sctp")
-			protocol_number=132;;
-		*)
-			log "Protocol ${protocol} not supported in ebtables"
-			return;;
-	esac
-			
-	cmd="--ip-proto ${protocol_number} $cmd"
-	cmd="-p ip $cmd"
-
-	cmd="-s ${mac} $cmd"
-	exec_log ebtables -t broute -A BROUTING ${cmd}
-}
-
-create_rules() {
-	protocol=$1; shift
-	macaddr=$1; shift
-	prio_num=$1; shift
-	port=$1
-
-	for p in $port; do
-		if [ "$protocol" == "none" ]; then
-			create_rule tcp $macaddr $prio_num $p
-			create_rule udp $macaddr $prio_num $p
-		else
-			create_rule $protocol $macaddr $prio_num $p
-		fi
-	done
-	# Create rule for all ports if port is not mentioned in uci
-	if [ -z "$port" ]; then
-		if [ "$protocol" == "none" ]; then
-			create_rule tcp $macaddr $prio_num
-			create_rule udp $macaddr $prio_num
-		else
-			create_rule $protocol $macaddr $prio_num
-		fi
-	fi
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num protocol
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	protocol=$(echo ${proto}|tr [A-Z] [a-z])
-	prio_num=$(get_priority ${priority})
-	[ -n "${macaddr}" -a -n "${prio_num}" ] || return
-
-	create_rules ${protocol} ${macaddr} ${prio_num} ${port}
-	repeated_macs=$(mac_to_repeated ${macaddr})
-	for mac in $repeated_macs; do
-		[ "$mac" = "${macaddr}" ] && continue
-		create_rules ${protocol} $mac ${prio_num} ${port}
-	done
-
-}
-
-reload_service() {
-	# Do not apply rules if ebtables is not present in system
-	[ -x /usr/sbin/ebtables ] || return;
-
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	reload_service
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -1,186 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /usr/share/libubox/jshn.sh
-
-START=99
-USE_PROCD=1
-
-CLIENT_LIST="/tmp/easy_qos_client.list"
-
-log() {
-	echo "${@}"|logger -t easy_qos -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-#	json_add_array "clients"
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}"
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
-	done
-}
-
-check_and_create() {
-	iptables -t mangle -C OUTPUT ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A OUTPUT ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark="0x$1/0x$1"; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j MARK --set-xmark ${mark}";
-	if [ -n "${ports}" ]; then
-		cmd="--match multiport --dports ${ports} ${cmd}";
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd} 
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num ip port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	ip=$(get_ipaddress ${macaddr})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" ]; then
-			create_rule tcp ${ip} ${prio_num} ${port_list}
-			create_rule udp ${ip} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${ip} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	clear_existing_rules
-	map_client_entries
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	reload_service
-	echo "Easy QoS installed">/dev/console;
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -1,10 +0,0 @@
-# Add firewall include
-uci -q batch <<-EOT
-        delete firewall.easyqos
-        set firewall.easyqos=include
-        set firewall.easyqos.path=/etc/firewall.easyqos
-        set firewall.easyqos.reload=1
-	uci del_list firewall.easyqos._access_w="root"
-	uci add_list firewall.easyqos._access_w="root"
-        commit firewall
-EOT

easy-soc-libs/Config.in

@@ -15,9 +15,5 @@ config LIBDSL_DEBUG
 	bool "Enable xdsl debugging"
 	default n
 
-config LIBDSL_TEST
-	depends on PACKAGE_libdsl
-	bool "Libdsl test program"
-	default n
 endmenu
 endif

easy-soc-libs/Makefile

@@ -8,15 +8,12 @@ PKG_NAME:=easy-soc-libs
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f6deba973cba01d630fdc40c6e97c384b07e3df5
+PKG_SOURCE_VERSION:=8989476ac5df494064ed94a52634be5c61fff037
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-endif
 
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
@@ -37,49 +34,43 @@ endef
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-  DEPENDS+=+TARGET_intel_mips:libnl +TARGET_intel_mips:libnl-route
+endef
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= XDSL library (libdsl)
 endef
 
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+TARGET_iopsys_ramips:swconfig
+  DEPENDS:=+TARGET_iopsys_ramips:swconfig
 endef
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
   KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
   TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
 else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
   TARGET_PLATFORM=MARVELL
   TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-  TARGET_CFLAGS +=-DIOPSYS_INTEL
+else ifeq ($(CONFIG_TARGET_lantiq_xrx500),y)
+  TARGET_PLATFORM=LANTIQ
+  TARGET_CFLAGS +=-DIOPSYS_LANTIQ
 else
-  $(info Unexpected CONFIG_TARGET)
+  $(info (UNEXPECTED CONFIG TARGET))
 endif
 
-export TARGET_PLATFORM
-
 ifdef CONFIG_IOP_LLA_LIBS_DEBUG
   TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
 endif
 
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
-  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi
-endef
-
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
 	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
@@ -87,22 +78,15 @@ subdirs := \
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
 	-I$(STAGING_DIR)/usr/include/libnl3
 
 MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	CFLAGS="$(TARGET_CFLAGS)" \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
 	subdirs="$(subdirs)"
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
-endef
-endif
-
 define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
@@ -124,12 +108,6 @@ define Build/InstallDev/libethernet
 	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
 endef
 
-define Build/Compile
-	$(call Build/Compile/Default)
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
-endif
-endef
 
 define Build/InstallDev
 	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
@@ -147,11 +125,7 @@ endef
 
 define Package/libdsl/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/bin
 	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
-endif
 endef
 
 $(eval $(call BuildPackage,libwifi))

endptmngr/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
 PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=bafc4f9e81de567965a0d8f2897d390cfb14636b
+PKG_SOURCE_VERSION:=a78fe95d5c5a0a320f3b62b9d2faafd07b56e3a7
 
 
 ifeq ($(CONFIG_ENDPT_OPEN),y)

eventlog/Makefile

@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=eventlog
+PKG_VERSION:=0.2.9
+PKG_RELEASE:=2
+
+PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
+PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
+PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
+
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libeventlog
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=A new API to format and send structured log messages.
+endef
+
+define Package/eventlog/description
+  A new API to format and send structured log messages. It supports multiple message
+  representations (plain, XML attributes and XML tags) and multiple output methods
+  (local syslogd).
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
+endef
+
+define Package/libeventlog/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libeventlog))

gryphon-led-module/Makefile

@@ -1,62 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=gryphon-led-kernel-module
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/$(PKG_NAME)
-  SUBMENU:=LED modules
-  TITLE:=LED driver for Gryphon
-  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
-  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
-  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  PKG_LICENSE:=Genexis
-  PKG_LICENSE_URL:=
-endef
-
-define KernelPackage/$(PKG_NAME)/description
-  This package contains the LED driver for Gryphon devices.
-endef
-
-EXTRA_KCONFIG:= CONFIG_RGB_LED=m
-
-MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) src/* $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
-		modules
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-endef
-
-$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -1,26 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-MODULE_NAME  = gryphon-led-kernel-module
-
-obj-m  := $(MODULE_NAME).o
-
-GENEXIS_FILES= \
-	main.o \
-	sk9822.o \
-	sk9822_bitbang.o
-
-$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -1,253 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#define DEBUG 1
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/printk.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/version.h>
-
-#include "sk9822.h"
-
-#define DRIVER_NAME			"canyon_led"
-#define DRIVER_AUTHOR		"Genexis B.V."
-#define DRIVER_DESC			"Canyon LED driver for SK9822"
-#define DRIVER_VERSION	"1"
-
-/**
- * sysfs interfaces
- */
-
-static ssize_t get_led_color(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	/* [ln] todo: dummy implementation */
-	int len;
-
-	len = sprintf(buf, "%d\n", 123);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-	}
-
-	return len;
-}
-
-/**
- * @brief Set complete LED strip to a specific color
- * @retval count number of bytes written
- * @retval -EMSGSIZE if the message is too big
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_color(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	size_t buflen = count;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	/* strip newline */
-	if ((count > 0) && (buf[count-1] == '\n')) {
-		buflen--;
-	}
-
-	if (buflen != 6) { // RRGGBB\0
-		return -EMSGSIZE;
-	}
-
-	// Update the LED array here
-	ret = sk9822_set_color_str(sk9822, buf);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to set led color\n");
-		return -EIO;
-	}
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
-
-static struct attribute *sk9822_dev_attrs[] = {
-	 &dev_attr_led_color.attr,
-	 NULL
-};
-
-static struct attribute_group sk9822_dev_attr_group = {
-	.name = "sk9822",
-	.attrs = sk9822_dev_attrs,
-};
-
-/**
- * device prope and removal
- */
-
-static int canyon_led_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct sk9822_leds *leds;
-
-	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
-	if (!leds) {
-		return -ENOMEM;
-	}
-	leds->dev = &pdev->dev;
-	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
-
-	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
-	if (ret < 0) {
-		dev_warn(&pdev->dev, "Could not read led-count property\n");
-		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
-	}
-
-	leds->led_colors = devm_kzalloc(&pdev->dev,
-			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
-	if (!leds->led_colors) {
-		return -ENOMEM;
-	}
-
-
-	platform_set_drvdata(pdev, leds);
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-
-	gpiod_direction_output(leds->clock_gpio, 1);
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		leds->clock_gpio = NULL;
-		return PTR_ERR(leds->clock_gpio);
-	} else {
-		printk(KERN_INFO "Got clock gpio\n");
-		gpiod_set_value(leds->clock_gpio, 0);
-	}
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-
-	gpiod_direction_output(leds->data_gpio, 1);
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		leds->data_gpio = NULL;
-		return PTR_ERR(leds->data_gpio);
-	} else {
-		printk(KERN_INFO "Got data gpio\n");
-		gpiod_set_value(leds->data_gpio, 0);
-	}
-
-	printk(KERN_INFO "Attempt to set filefs stuff\n");
-	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-	if (ret) {
-		dev_err(&pdev->dev, "sysfs creation failed\n");
-		return ret;
-	}
-
-#if 0
-	printk(KERN_INFO "Flash LEDs to verify they work\n");
-	sk9822_set_color_str(leds, "00FF00");
-	sk9822_update(leds);
-	msleep(200);
-	sk9822_set_color_str(leds, "000000");
-	sk9822_update(leds);
-#endif
-
-	printk(KERN_INFO "canyon led successfully probed\n");
-
-	return 0;
-}
-
-static int canyon_led_remove(struct platform_device *pdev)
-{
-	struct sk9822_leds *leds;
-
-	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-
-	leds = platform_get_drvdata(pdev);
-	if (IS_ERR(leds)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -1;
-	}
-
-	if (leds->clock_gpio) {
-		gpiod_put(leds->clock_gpio);
-	}
-
-	if (leds->data_gpio) {
-		gpiod_put(leds->data_gpio);
-	}
-
-	printk(KERN_NOTICE "Bye, bye\n");
-
-	return 0;
-}
-
-/**
- * platform driver metadata
- */
-
-static const struct of_device_id canyon_led_of_ids[] = {
-	{ .compatible = "canyon,led" },
-	{ }
-};
-
-static struct platform_driver canyon_led = {
-	.probe = &canyon_led_probe,
-	.remove = &canyon_led_remove,
-	.driver = {
-		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
-		.of_match_table = canyon_led_of_ids,
-	},
-};
-
-MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
-module_platform_driver(canyon_led);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-#include "sk9822_bitbang.h"
-
-cRGB __hexs_to_rgb(const char *hex)
-{
-	cRGB rgb;
-	int r, g, b;
-
-	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
-	// This needs sanity checking
-	rgb.r = r;
-	rgb.g = g;
-	rgb.b = b;
-	return rgb;
-}
-
-/**
- * @brief update the color over the given device struct to the provided HEX color
- */
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
-{
-	int i;
-	cRGB color = __hexs_to_rgb(hex);
-
-	for (i = 0; i < sk9822->led_count; i++) {
-		sk9822->led_colors[i] = color;
-	}
-
-	return 0;
-}
-
-/**
- * @brief write device struct to the device
- */
-int sk9822_update(struct sk9822_leds *sk9822)
-{
-	uint16_t i;
-	uint16_t led_count = sk9822->led_count;
-
-	// Start Frame
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-
-	for (i = 0; i < led_count; i++) {
-		cRGB *p = &sk9822->led_colors[i];
-		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
-		sk9822_bb_write(sk9822, p->b);
-		sk9822_bb_write(sk9822, p->g);
-		sk9822_bb_write(sk9822, p->r);
-	}
-
-	// End frame
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-
-	return 0;
-}

gryphon-led-module/src/sk9822.h

@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef SK9822_H_
-#define SK9822_H_
-
-#include <linux/types.h>
-
-#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
-#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
-
-typedef struct {
-	uint8_t b;
-	uint8_t g;
-	uint8_t r;
-} cRGB;   // BGR (SK9822 Standard)
-
-struct sk9822_leds {
-	struct device *dev;
-	struct gpio_desc *clock_gpio;
-	struct gpio_desc *data_gpio;
-
-	cRGB *led_colors;
-	uint8_t led_brightness;
-	uint16_t led_count;
-};
-
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
-int sk9822_update(struct sk9822_leds *sk9822);
-
-#endif /* SK9822_H_ */

gryphon-led-module/src/sk9822_bitbang.c

@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-/**
- * @brief Bitbang write operation CLOCK+DATA
- *
- * Assumed state before call: CLOCK- Low, DATA- High
- */
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
-{
-	uint8_t i;
-
-	for (i = 0; i < 8 ; i++) {
-		if (!(c&0x80)) {
-			gpiod_set_value(sk9822->data_gpio, 0); // set data low
-		} else {
-			gpiod_set_value(sk9822->data_gpio, 1); // set data high
-		}
-
-		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
-		c <<= 1;
-		udelay(1); // stretch clock
-		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
-	}
-
-	// State after call: SCK Low, Data high
-}

gryphon-led-module/src/sk9822_bitbang.h

@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _SK9822_BB_H_
-#define _SK9822_BB_H_
-
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
-
-#endif /* _SK9822_BB_H_ */

ice-client/Makefile

@@ -19,14 +19,14 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.3.6
+BASE_PKG_VERSION:=5.2.3
 PKG_RELEASE:=
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=94aab1532fef2caf2d65579614fc413252a517eb
+PKG_SOURCE_VERSION:=795cf8ce3cc19ff8bbb014c8ac456784c187dcc5
 ifeq ($(CONFIG_ICE_OPEN),y)
 TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/

ice-client/files/ice-client.uci_default

@@ -9,8 +9,6 @@ uci -q set passwords.ice=usertype
 uci -q set passwords.ice.password="\$WPAKEY"
 uci -q del_list passwords.ice._access_w=root
 uci -q add_list passwords.ice._access_w=root
-uci -q del_list passwords.ice._access_r=root
-uci -q add_list passwords.ice._access_r=root
 uci -q commit passwords
 
 uci show rpcd | grep username=.*ice.* >/dev/null || {

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-05-08
+PKG_VERSION:=4.0-2018-12-04
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=da50b98f5b0a9539edf97b3ffda4bf5a030dfa18
+PKG_SOURCE_VERSION:=f9bbd7fb4a122dd523c2f2eaedec932c8483154f
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -51,20 +51,6 @@ define Package/icwmp_xmpp
 	DEPENDS:=+libuci +libubox +libexpat +libstrophe
 endef
 
-define Package/icwmp_twamp
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 twamp feature
-	DEPENDS:=+libuci
-endef
-
-define Package/icwmp_udpechoserver
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 udpechoserver feature
-	DEPENDS:=+libuci
-endef
-
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
@@ -217,24 +203,6 @@ define Package/icwmp_xmpp/install
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
 endef
 
-define Package/icwmp_udpechoserver/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
-endef
-
-define Package/icwmp_twamp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_twampd $(1)/usr/sbin/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_twampd $(1)/etc/init.d/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
-endef
-
 define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
@@ -270,6 +238,4 @@ $(eval $(call BuildPackage,icwmp-curl))
 $(eval $(call BuildPackage,libdatamodel))
 $(eval $(call BuildPackage,icwmp_stun))
 $(eval $(call BuildPackage,icwmp_xmpp))
-$(eval $(call BuildPackage,icwmp_udpechoserver))
-$(eval $(call BuildPackage,icwmp_twamp))
 $(eval $(call BuildPackage,icwmp-zstream))

icwmp/README

@@ -9,7 +9,7 @@
 	- libz.so
 	- libcrypto.so
 	the librairies should be present in the "staging_dir/target-i386_uClibc-0.9.30.1/usr/lib/"  or "staging_dir/toolchain-mips_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib"
-
+	
 	header files and folders:
 	- expat.h
 	- expat_external.h
@@ -33,7 +33,7 @@ this software is composed of 3 packages:
 - cwmp kernel package: contains cwmp kernel module. This module could be used by other kernel modules to notify the icwmpd daemon  when kernel parameter changes
 
 The three packages should be selected in the make menu config in order to get the three packages compiled.
-To compile the three packages: $ make package/cwmpd/compile
+To compile the three packages: $ make package/cwmpd/compile 
 
 3) OpenWRT settings
 in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script file:
@@ -49,7 +49,7 @@ in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script
 	- libopenssl package should be installed
 	- libz package should be installed
 	- libcrypto package should be installed
-
+    
     Configure the acs url in the /etc/config/icwmp
     and then start the cwmpd service: /etc/init.d/icwmpd start
     for the help: /etc/init.d/icwmpd

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -75,11 +75,9 @@ handle_icwmp_restart() {
 		"$previpaddr" = "$curipaddr" -a \
 		"$prevgateway" = "$curgateway" -a \
 		"$prevsubnets" = "$cursubnets" -a \
-		"$prevdnsservers" = "$curdnsservers" \
-	] && {
-		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
-		[ -z "$prevopt43url" ] && exit 0
-	}
+		"$prevdnsservers" = "$curdnsservers" -a \
+		"$prevopt43url" = "$curopt43url" \
+	] && exit 0
 
 	/etc/init.d/icwmpd reload &
 }

ifbt/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys Software Solutions AB
+# Copyright (C) 2013 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=ifbt
 PKG_VERSION:=0.1
 
-PKG_SOURCE_VERSION:=0286812ed8036dea758f904694dc416481fba64d
+PKG_SOURCE_VERSION:=a0572079265293ed99dc4d69fd38528760d29be9
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
 
@@ -18,22 +18,6 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-TARGET_PLATFORM:=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_INTEL
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-TARGET_PLATFORM:=-DIOPSYS_MEDIATEK
-else
-$(info (UNEXPECTED CONFIG TARGET))
-endif
-
-export TARGET_PLATFORM
-
 define Package/ifbt
 	CATEGORY:=Utilities
 	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c

imonitor/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2018 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -15,6 +15,7 @@ PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
 PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 
@@ -23,7 +24,7 @@ include $(INCLUDE_DIR)/cmake.mk
 
 define Package/imonitor
 	CATEGORY:=Utilities
-	TITLE:=iopsysWrt process supervisor
+	TITLE:=Inteno process supervisor
 	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
 endef
 

inbd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2016 iopsys
+# Copyright (C) 2016 Inteno
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=665a72a6bb2b5ea5a17ad6248957fe35525b3782
+PKG_SOURCE_VERSION:=b846ae0ff55284392de2c4d874851b33edd7a6c5
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 
@@ -34,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/inbd
 	CATEGORY:=Utilities
-	TITLE:=iopsys Netlink Bridge Daemon
+	TITLE:=Inteno Netlink Bridge Daemon
 	URL:=
 	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
 endef

iop/Makefile

@@ -20,7 +20,7 @@ define Package/iop
 endef
 
 define Package/iop/description
-	This package contains iopsysWrt SDK utilities
+	This package contains Intenos Iop utilities
 endef
 
 define Build/Compile

iop/configs/config

@@ -3,9 +3,11 @@ CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
+# CONFIG_LOCALMIRROR is not set
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
+CONFIG_PACKAGE_6tunnel=y
 CONFIG_PACKAGE_alsa-lib=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
@@ -15,35 +17,57 @@ CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
 CONFIG_PACKAGE_gdb=m
+CONFIG_PACKAGE_gdbserver=m
 CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_glib2=y
+CONFIG_PACKAGE_ice-client=y
+CONFIG_PACKAGE_ice-client-camerawatch=m
+CONFIG_PACKAGE_ice-client-fileme=m
+CONFIG_PACKAGE_ice-client-gigaset=m
+CONFIG_PACKAGE_ice-client-guest=m
+CONFIG_PACKAGE_ice-client-iperf=m
+CONFIG_PACKAGE_ice-client-logreader=m
+CONFIG_PACKAGE_ice-client-monitor=m
+CONFIG_PACKAGE_ice-client-netrounds=m
+CONFIG_PACKAGE_ice-client-rshell=m
+CONFIG_PACKAGE_ice-client-texec=m
 CONFIG_PACKAGE_icwmp-curl=y
 CONFIG_PACKAGE_ifbt=y
 CONFIG_PACKAGE_imonitor=y
 CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_iopupgrade=y
-CONFIG_PACKAGE_ip-full=y
-CONFIG_PACKAGE_iperf3=y
+CONFIG_PACKAGE_netmode=y
+CONFIG_PACKAGE_iperf-mt=y
 CONFIG_PACKAGE_ipset=y
 CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
-# CONFIG_PACKAGE_iwatchdog is not set
+CONFIG_PACKAGE_iup=y
+CONFIG_PACKAGE_iwatchdog=y
 CONFIG_PACKAGE_juci=y
-CONFIG_PACKAGE_juci-config-backup=y
+CONFIG_PACKAGE_juci-broadcom-iptv=y
+CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
+CONFIG_PACKAGE_juci-wifilife=y
+CONFIG_PACKAGE_juci-wireless=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
 CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
 CONFIG_PACKAGE_juci-dropbear=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
+CONFIG_PACKAGE_juci-ice-client=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
+CONFIG_PACKAGE_juci-config-backup=y
+CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-iup=y
+# CONFIG_PACKAGE_juci-qos is not set
+CONFIG_PACKAGE_juci-voice-client=y
+CONFIG_PACKAGE_juci-macdb=y
 CONFIG_PACKAGE_juci-minidlna=y
 CONFIG_PACKAGE_juci-mod-status=y
 CONFIG_PACKAGE_juci-mod-system=y
-CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-natalie-dect=y
 CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-device=y
 CONFIG_PACKAGE_juci-network-dsl=y
@@ -51,20 +75,24 @@ CONFIG_PACKAGE_juci-network-netifd=y
 CONFIG_PACKAGE_juci-network-port=y
 CONFIG_PACKAGE_juci-openvpn=y
 CONFIG_PACKAGE_juci-owsd=y
+CONFIG_PACKAGE_juci-printer=y
 CONFIG_PACKAGE_juci-realtime-graphs=y
 CONFIG_PACKAGE_juci-samba=y
+CONFIG_PACKAGE_juci-simple-gui=y
 CONFIG_PACKAGE_juci-snmpd=y
 CONFIG_PACKAGE_juci-sysupgrade=y
+CONFIG_PACKAGE_juci-theme-iopsys=y
+CONFIG_PACKAGE_juci-ubus-core=y
 CONFIG_PACKAGE_juci-upnp=y
 CONFIG_PACKAGE_juci-usb=y
-CONFIG_PACKAGE_juci-voice-client=y
-CONFIG_PACKAGE_juci-wifilife=y
-CONFIG_PACKAGE_juci-wireless=y
-CONFIG_PACKAGE_juci-theme-iopsys=y
+CONFIG_PACKAGE_juci-utils=y
+# CONFIG_PACKAGE_kmod-ipt-nathelper is not set
+CONFIG_PACKAGE_kmod-nls-base=y
 CONFIG_PACKAGE_kmod-siit=y
 CONFIG_PACKAGE_libcgroup-daemon=y
 CONFIG_PACKAGE_libcgroup=y
 # CONFIG_PACKAGE_libcgroup-utils is not set
+CONFIG_PACKAGE_ldd=y
 CONFIG_PACKAGE_libdaemon=y
 CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
@@ -72,10 +100,14 @@ CONFIG_PACKAGE_libreadline=y
 CONFIG_PACKAGE_loop-detector=m
 CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
+CONFIG_PACKAGE_mtd-utils=y
+CONFIG_PACKAGE_mtd-utils-deubinize=y
+CONFIG_PACKAGE_mtd-utils-imagewrite=y
+CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
+CONFIG_PACKAGE_mtd-utils-nanddump=y
 CONFIG_PACKAGE_mwan3=y
 CONFIG_PACKAGE_nand-utils=y
 CONFIG_PACKAGE_ndisc6=y
-CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
 CONFIG_PACKAGE_odhcp6c=y
@@ -84,6 +116,7 @@ CONFIG_PACKAGE_openssl-util=y
 CONFIG_OPENSSL_WITH_COMPRESSION=y
 CONFIG_PACKAGE_openvpn-easy-rsa=y
 CONFIG_PACKAGE_openvpn-openssl=y
+# CONFIG_PACKAGE_p910nd is not set
 CONFIG_PACKAGE_peripheral_manager=y
 CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
@@ -122,7 +155,7 @@ CONFIG_PACKAGE_wifimngr=y
 CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_zoneinfo-core=y
 CONFIG_PACKAGE_zoneinfo-europe=y
-CONFIG_TARGET_CUSTOMER="IOPSYS"
+CONFIG_TARGET_CUSTOMER="INT"
 CONFIG_TARGET_ROOTFS_TARGZ=y
 # CONFIG_USE_SSTRIP is not set
 CONFIG_USE_STRIP=y
@@ -154,6 +187,7 @@ CONFIG_BUSYBOX_CONFIG_MICROCOM=y
 # CONFIG_BUSYBOX_CONFIG_RMMOD is not set
 CONFIG_BUSYBOX_CONFIG_STTY=y
 CONFIG_BUSYBOX_CONFIG_TFTP=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
@@ -167,9 +201,11 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
 # CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY is not set
 # CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
@@ -179,6 +215,7 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
 # CONFIG_BUSYBOX_CONFIG_NTPD is not set
+# CONFIG_BUSYBOX_CONFIG_FEATURE_NTPD_SERVER is not set
 CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
@@ -187,6 +224,5 @@ CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_SIGNED_PACKAGES is not set
 CONFIG_KERNEL_DEVTMPFS=y
 CONFIG_KERNEL_DEVTMPFS_MOUNT=y
+CONFIG_PACKAGE_ip-full=y
 # CONFIG_BUSYBOX_CONFIG_IP is not set
-LOCAL_MIRROR="http://download.iopsys.eu/iopsys/mirror/"
-

iop/configs/luci.diff

@@ -0,0 +1,38 @@
+CONFIG_PACKAGE_luci=y
+CONFIG_PACKAGE_luci-mod-admin-core=y
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-app-ddns=y
+CONFIG_PACKAGE_luci-app-dslstats=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-iup=y
+CONFIG_PACKAGE_luci-app-mcpd=y
+CONFIG_PACKAGE_luci-app-minidlna=y
+CONFIG_PACKAGE_luci-app-multiwan=y
+CONFIG_PACKAGE_luci-app-p910nd=y
+CONFIG_PACKAGE_luci-app-parental-control=y
+CONFIG_PACKAGE_luci-app-port-management=y
+CONFIG_PACKAGE_luci-app-power-mgmt=y
+CONFIG_PACKAGE_luci-app-samba=y
+CONFIG_PACKAGE_luci-app-sfp=y
+CONFIG_PACKAGE_luci-app-snmp=y
+CONFIG_PACKAGE_luci-app-speedtest=y
+CONFIG_PACKAGE_luci-app-upnp=y
+CONFIG_PACKAGE_luci-app-voice=y
+CONFIG_PACKAGE_luci-theme-base=y
+CONFIG_PACKAGE_luci-theme-bootstrap=y
+CONFIG_PACKAGE_luci-i18n-english=y
+CONFIG_PACKAGE_luci-proto-3g=y
+CONFIG_PACKAGE_luci-proto-4g=y
+CONFIG_PACKAGE_luci-proto-core=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-sgi-cgi=y
+CONFIG_PACKAGE_luci-lib-core=y
+CONFIG_PACKAGE_luci-lib-core_source=y
+CONFIG_PACKAGE_luci-lib-ipkg=y
+CONFIG_PACKAGE_luci-lib-json=y
+CONFIG_PACKAGE_luci-lib-nixio=y
+CONFIG_PACKAGE_luci-lib-nixio_notls=y
+CONFIG_PACKAGE_luci-lib-sys=y
+CONFIG_PACKAGE_luci-lib-web=y
+

iop/configs/target/intel_mips/config

@@ -0,0 +1,67 @@
+# CONFIG_BUSYBOX_CONFIG_BRCTL is not set
+CONFIG_GCC_VERSION="6.3.0"
+CONFIG_TOOLCHAINOPTS=y
+# CONFIG_BINUTILS_USE_VERSION_2_27 is not set
+CONFIG_BINUTILS_USE_VERSION_2_28=y
+# CONFIG_BINUTILS_USE_VERSION_2_29_1 is not set
+# CONFIG_GCC_USE_GRAPHITE is not set
+# CONFIG_GCC_USE_VERSION_5 is not set
+CONFIG_GCC_USE_VERSION_6=y
+# CONFIG_GCC_USE_VERSION_7 is not set
+# CONFIG_LIBC_USE_GLIBC is not set
+CONFIG_LIBC_USE_MUSL=y
+
+
+# CONFIG_PACKAGE_ppp-mod-pppoa is not set
+
+#################### switch related
+CONFIG_PACKAGE_switch_cli_ugw8=y
+
+#################### ppa related
+CONFIG_PACKAGE_ppacmd=y
+# CONFIG_PACKAGE_kmod-ppa-drv-gre is not set
+# CONFIG_PACKAGE_kmod-ppa-drv-grx500-eth-bond is not set
+# CONFIG_PACKAGE_kmod-ppa-drv-grx500-mpe is not set
+# CONFIG_PACKAGE_kmod-ppa-drv-mpe-ip97 is not set
+CONFIG_PACKAGE_mcast-pa=y
+
+#################### DSL related
+CONFIG_PACKAGE_dsl-cpe-control-vrx=y
+CONFIG_dsl-cpe-mei-vrx_DEVICE_VR11=y
+CONFIG_dsl-cpe-mei-vrx_IRQ_POLLING_ACTIVE=y
+CONFIG_PACKAGE_kmod-dsl-cpe-mei-vrx=y
+CONFIG_PACKAGE_ifxos=y
+CONFIG_PACKAGE_kmod-directconnect-dp=y
+CONFIG_PACKAGE_kmod-vrx518_tc_drv=y
+CONFIG_PACKAGE_vrx518_aca_fw=y
+CONFIG_PACKAGE_vrx518_ppe_fw=y
+CONFIG_dsl-cpe-api-vrx_MODEL_DEBUG=y
+CONFIG_dsl-cpe-control-vrx_DTI=y
+CONFIG_dsl-cpe-control-vrx_MODEL_DEBUG=y
+# yes intel dsl script need this.
+CONFIG_BUSYBOX_CONFIG_USLEEP=y
+#################### DSL related end
+
+#################### WIFI related
+CONFIG_PACKAGE_kmod-lantiq-wlan-wave-support_5_x=y
+CONFIG_PACKAGE_ltq-wlan-wave_5_x=y
+CONFIG_FEATURE_LTQ_WAVE_500_PCIE=y
+# CONFIG_FEATURE_LTQ_WAVE_500 is not set
+CONFIG_FEATURE_LTQ_WAVE_AR10_SUPPORT=y
+# CONFIG_FEATURE_LTQ_WAVE_STA is not set
+# CONFIG_FEATURE_LTQ_WAVE_DEBUG_TFTP_BINS is not set
+# CONFIG_FEATURE_LTQ_WAVE_FGPA_DUMMY_PHY is not set
+CONFIG_FEATURE_LTQ_WAVE_500B=y
+####################
+
+# the options below this point is wrong but packages wont compile
+
+# CONFIG_PACKAGE_icwmp-curl is not set
+# CONFIG_PACKAGE_juci-icwmp is not set
+# CONFIG_PACKAGE_libcgroup is not set
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libdatamodel is not set
+
+# CONFIG_TARGET_ROOTFS_INITRAMFS is not set
+# CONFIG_TARGET_ROOTFS_SQUASHFS is not set
+

iop/configs/target/intel_mips/speedport_smart3/config

@@ -0,0 +1,3 @@
+# temporary solution for kernel
+CONFIG_KERNEL_GIT_BRANCH="easy550_anywan_smart3board"
+CONFIG_KERNEL_GIT_COMMIT="58796d57c6da6bba984c781c05222349f7c2b655"

iop/configs/target/iopsys_brcm63xx_arm/config

@@ -0,0 +1,15 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+
+# CONFIG_PACKAGE_juci-broadcom-wl is not set
+# CONFIG_PACKAGE_juci-minisnmpd is not set
+# CONFIG_PACKAGE_juci-router-openwrt is not set
+# CONFIG_PACKAGE_speedsvc is not set
+
+# CONFIG_juci_broadcom_wl is not set
+# CONFIG_juci_minisnmpd is not set
+# CONFIG_juci_router_openwrt is not set
+
+# CONFIG_PACKAGE_brcminfo is not set
+CONFIG_PACKAGE_brcm_fw_tool=y
+

iop/configs/target/iopsys_brcm63xx_arm/dg400/config

@@ -0,0 +1,4 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_arm/dg400prime/config

@@ -0,0 +1,4 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_arm/eg400/config

@@ -0,0 +1,7 @@
+CONFIG_BCM_I2C=y
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_TARGET_NO_DSL=y
+

iop/configs/target/iopsys_brcm63xx_arm/f104/config

@@ -0,0 +1,6 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_USE_DSL=y
+CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/f104w/config

@@ -0,0 +1,6 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_USE_DSL=y
+CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/sdx810_rg/config

@@ -0,0 +1,5 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_TARGET_NO_DSL=y

iop/configs/target/iopsys_brcm63xx_mips/cg300/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/config

@@ -0,0 +1,15 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+
+# CONFIG_PACKAGE_juci-broadcom-wl is not set
+# CONFIG_PACKAGE_juci-minisnmpd is not set
+# CONFIG_PACKAGE_juci-router-openwrt is not set
+# CONFIG_PACKAGE_speedsvc is not set
+
+# CONFIG_juci_broadcom_wl is not set
+# CONFIG_juci_minisnmpd is not set
+# CONFIG_juci_router_openwrt is not set
+
+# CONFIG_PACKAGE_brcminfo is not set
+CONFIG_PACKAGE_brcm_fw_tool=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg200/config

@@ -0,0 +1,3 @@
+CONFIG_BCM_I2C=y
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg200al/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg301/config

@@ -0,0 +1,2 @@
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg301al/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/eg200/config

@@ -0,0 +1,5 @@
+CONFIG_BCM_I2C=y
+CONFIG_TARGET_NO_DECT=y
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_ENDPOINT_MODULE=y
+

iop/configs/target/iopsys_brcm63xx_mips/eg300/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/vg50/config

@@ -0,0 +1,4 @@
+CONFIG_TARGET_NO_DHD=y
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_ramips/config

@@ -0,0 +1,14 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+# CONFIG_PACKAGE_power-management is not set
+# CONFIG_PACKAGE_qos-scripts is not set
+# CONFIG_PACKAGE_mtd-utils-deubinize is not set
+# CONFIG_PACKAGE_mtd-utils-imagewrite is not set
+# CONFIG_PACKAGE_mtd-utils-mkfs.jffs2 is not set
+# CONFIG_PACKAGE_mtd-utils-nanddump is not set
+CONFIG_PACKAGE_mtd-utils-nandwrite=y
+CONFIG_PACKAGE_mtk-bndstrg=y
+CONFIG_PACKAGE_igmpproxy=y
+CONFIG_PACKAGE_kmod-nf-nathelper=y
+CONFIG_PACKAGE_kmod-nf-nathelper-extra=y
+# CONFIG_PACKAGE_endptmngr is not set

iop/iop.completion

@@ -34,8 +34,9 @@ _iop()
 
     iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
              feeds_update genconfig generate_tarballs install_key \
-             scp_changes setup_host ssh_install_key status \
-             update_package update_feed_branches ssh_upgrade"
+             scp_changes setup_host ssh_install_key ssh_sysupgrade \
+             ssh_sysupgrade_latest ssh_sysupgrade_latest_w status \
+             update_package update_feed_branches"
 
     if [ $COMP_CWORD -eq 1 ] ; then
 
@@ -75,13 +76,7 @@ _iop()
                 fi
                 return 0
                 ;;
-            ssh_upgrade)
-	        if [ "$prev" == "-f" ] ; then
-		    _filedir
-		else
-		    COMPREPLY=( $(compgen -W "-f -t -i -n -x -b" -- ${cur}) )
-		fi
-	         ;;
+
             *)
                 # No arguments or arguments not supported yet
                 ;;

iop/scripts/feeds_update.sh

@@ -32,15 +32,13 @@ function feeds_update {
     fi
 
     # targets need to be installed explicitly
-    targets="iopsys-brcm63xx-mips iopsys-brcm63xx-arm iopsys-ramips intel_mips"
-    for target in $targets
-    do
-	rm -f target/linux/$target
-	./scripts/feeds install -p targets $target
-    done
+    ./scripts/feeds install -p targets iopsys-brcm63xx-mips
+    ./scripts/feeds install -p targets iopsys-brcm63xx-arm
+    ./scripts/feeds install -p targets iopsys-ramips
+    ./scripts/feeds install -p intel_targets intel_mips
 
     # install all packages
-    ./scripts/feeds install -a
+    ./scripts/feeds install -a 
 
     # remove broken symlinks ( for packages that are no longer in the feed )
     find -L package/feeds -maxdepth 2 -type l -delete
@@ -49,7 +47,7 @@ function feeds_update {
     make defconfig
 
     # record when we last run this script
-    touch tmp/.iop_bootstrap
+    touch tmp/.iop_bootstrap 
 
     # always return true
     exit 0

iop/scripts/genconfig.sh

@@ -7,104 +7,45 @@ function genconfig {
 	export FILEDIR="files/"
 	export THEMEDIR="themes"
 	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/iopsys/iop"
+	export CONFIGPATH="package/feeds/iopsys/iop/configs"
 	CUSTPATH="customerconfigs"
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
 	export DEVELOPER=0
+	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
+
 	target="bogus"
-	config_path=""
-	brcm63xx_mips="target/linux/iopsys-brcm63xx-mips"
-	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
-	ramips="target/linux/iopsys-ramips"
-	intel_mips="target/linux/intel_mips"
-
-	Red='\033[0;31m'          # Red
-	Color_Off='\033[0m'       # Text Reset
-	Yellow='\033[0;33m'       # Yellow
-
-	function find_last {
-	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
-	}
-
-	function is_new {
-	    for opt in $conf_warned
-	    do
-		if [ "$opt" == "$1" ]
-		then
-		    return 1
-		fi
-	    done
-	    # option not found return true
-	    return 0
-	}
-
-	function verify_config {
-	    IFS=$'\n'
-	    org=$(<.genconfig.config)
-	    unset IFS
-	    local num
-	    local conf_opt
-	    local conf_org
-	    local conf_new
-
-	    #echo "lines to check $tot_lines"
-	    num=0
-	    for line in $org
-	    do
-		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
-		if [ -n "${conf_opt}" ]
-		then
-		    conf_org=$(find_last ${conf_opt} .genconfig.config)
-		    conf_new=$(find_last ${conf_opt} .config)
-		    if [ "$conf_org" != "$conf_new" ]
-		    then
-			if is_new $conf_opt
-			then
-			    echo -e "config option [${Red}$conf_opt${Color_Off}] is not set correctly in .config"
-			    echo -e "got value [${Yellow}$conf_new${Color_Off}] but wanted [${Yellow}$conf_org${Color_Off}]"
-			    echo "This is a real problem somebody needs to investigate"
-			    echo ""
-			    conf_warned="$conf_warned $conf_opt"
-			fi
-		    else
-			true
-			# for debug to see all options
-			#echo -e "wanted [$conf_org] got [$conf_new]"
-		    fi
-		fi
-		num=$((num+1))
-	    done
-	}
+	masterconfig=1
 
 	# Takes a board name and returns the target name in global var $target
 	set_target() {
 	    local profile=$1
 
+	    local iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25 hpc_hu02 eg200"
+	    local iopsys_brcm63xx_arm="dg400 eg400 sdx810_rg f104w f104 dg400prime dg400primeb 963138REF_P502"
+	    local iopsys_ramips="ex400 sdx810_ap"
+	    local intel_mips="easy550 easy350 speedport_smart3"
+	    local ramips="mt7621"
 
-		[ -e $brcm63xx_mips/genconfig ] &&
-			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
-		[ -e $brcm63xx_arm/genconfig ] &&
-			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
-		[ -e $ramips/genconfig ] &&
-			iopsys_ramips=$(cd $ramips; ./genconfig)
-		[ -e $intel_mips/genconfig ] &&
-			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
-
-	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips; do
-				echo "$list based boards:"
-				for b in ${!list}; do
-					echo -e "\t$b"
-				done
-			done
-			return
+	    if [ "$profile" == "LIST" ]
+	    then
+		for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips intel_mips
+		do
+		    echo "$list based boards:"
+		    for b in ${!list}
+		    do
+			echo -e "\t$b"
+		    done
+		done
+		return
 	    fi
+	    
+	    
+	    local targets
 
 	    for p in $iopsys_brcm63xx_mips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_mips"
-			config_path="$brcm63xx_mips/config"
 		    return
 		fi
 	    done
@@ -112,7 +53,6 @@ function genconfig {
 	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_arm"
-			config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
@@ -120,15 +60,21 @@ function genconfig {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
-			config_path="$ramips/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_intel_mips; do
+	    for p in $ramips; do
+		if [ $p == $profile ]; then
+		    target="ramips"
+		    masterconfig=0
+		    return
+		fi
+	    done
+
+	    for p in $intel_mips; do
 		if [ $p == $profile ]; then
 		    target="intel_mips"
-			config_path="$intel_mips/config"
 		    return
 		fi
 	    done
@@ -145,12 +91,17 @@ function genconfig {
 		mediatekAllowed=0
 		wifilifeAllowed=0
 
-		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
-		git ls-remote git@dev.iopsys.eu:mediatek/linux.git -q 2>/dev/null && mediatekAllowed=1
-		git ls-remote git@dev.iopsys.eu:dialog/natalie-dect-12.26.git -q 2>/dev/null && natalieAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/wifilife.git -q 2>/dev/null && wifilifeAllowed=1
-		git ls-remote git@private.inteno.se:ice-client.git -q -q 2>/dev/null && iceAllowed=1
+		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
+		for repo in $allowedRepos; do
+			case $repo in
+			bcmkernel) bcmAllowed=1 ;;
+			ice-client) iceAllowed=1 ;;
+			endptcfg) endptAllowed=1 ;;
+			natalie-dect*) natalieAllowed=1 ;;
+			linux) mediatekAllowed=1 ;;
+			wifilife) wifilifeAllowed=1 ;;
+			esac
+		done
 	}
 
 	v() {
@@ -159,20 +110,20 @@ function genconfig {
 
 	usage() {
 		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
+		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer ]"
 		echo
-		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\t\tVerbose"
+		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
+		echo -e "  -v|--verbose\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
-		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
-		echo -e "  -h|--help\t\tShow this message"
+		echo -e "  -p|--profile\tSet profile (if exists) default juci"
+		echo -e "  -s|--override\tEnable 'Package source tree override'"
+		echo -e "  -h|--help\tShow this message"
 		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\t\tList all Customers and their board types"
-		echo -e "  -b|--boards\t\tList all board types"
+		echo -e "  -a|--list-all\tList all Customers and their board types"
+		echo -e "  -b|--boards\tList all board types"		
 		echo
-		echo "Example ./iop genconfig dg200 TELIA"
-		echo "(if no customerconfig is chosen, iopsys config will be used)"
+		echo "Example ./iop genconfig vg50 TELIA"
+		echo "(if no customerconfig is chosen the Inteno Config will be used)"
 		echo
 		exit 0
 	}
@@ -232,7 +183,7 @@ function genconfig {
 
 	setup_dirs()
 	{
-		if git ls-remote $CUSTREPO -q 2>/dev/null; then
+		if ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -qw ${CUSTREPO:22}; then
 			if [ ! -d "$CUSTPATH" ]; then
 				git clone "$CUSTREPO" "$CUSTPATH"
 			elif [ $IMPORT -eq 1 ]; then
@@ -263,42 +214,62 @@ function genconfig {
 	create_and_copy_files()
 	{
 		local BOARDTYPE=$1
-		shift
-		local CUSTOMERS=$@
+		local CUSTOMER=$2
 
-		# Validate seleced board and customers
+		# Validate seleced board and customer
 		set_target $BOARDTYPE
 		if [ $target == "bogus" ]; then
 			echo "Hardware profile does not exist"
 			exit 1
-		elif [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-					echo "Customer profile for '$CUSTOMER' does not exist"
+		elif [ -n "$CUSTOMER" ]; then
+			if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
+				echo "Customer profile for '$CUSTOMER' does not exist"
+				exit 1
+			elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
+				echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
+				if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+					echo "Common profile configuration will be used"
+				else
 					exit 1
-				elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-					echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-					if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-						echo "Common profile configuration will be used"
-					else
-						exit 1
-					fi
 				fi
-			done
+			fi
 		fi
 
 		# Generate base config
+		# Used only for iopsys targets, not openwrt targets
 		rm -f .config
-		v "Config $BOARDTYPE selected"
-		v "cp $CONFIGPATH/config .config"
-		cp $CONFIGPATH/config .config
+		if [ $masterconfig -eq 1 ]; then
+			v "Config $BOARDTYPE selected"
+			v "cp $CONFIGPATH/config .config"
+			cp $CONFIGPATH/config .config
+		fi
 
-		if [ -f $config_path/config ]; then
-		    cat $config_path/config >> .config
+		# Add target (soc/board specific )
+		if [ -f $CONFIGPATH/target/config ]; then
+		    cat $CONFIGPATH/target/config >> .config
 		fi
-		if [ -f $config_path/$BOARDTYPE/config ]; then
-		    cat $config_path/$BOARDTYPE/config >> .config
+		if [ -f $CONFIGPATH/target/$target/config ]; then
+		    cat $CONFIGPATH/target/$target/config >> .config
 		fi
+		if [ -f $CONFIGPATH/target/$target/$BOARDTYPE/config ]; then
+		    cat $CONFIGPATH/target/$target/$BOARDTYPE/config >> .config
+		fi
+
+		# Apply profile diff to master config if selected
+		if [ -n "$PROFILE" ]; then
+			if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
+				cat $CONFIGPATH/$PROFILE.diff >> .config
+			elif [ "$PROFILE" == "juci" ]; then
+				v "Default profile (juci) is selected."
+			else
+				echo "ERROR: profile $PROFILE does not exist!"
+				exit 1
+			fi
+		else
+			v "No profile selected! Using default."
+		fi
+
+		# Set target and profile
 
 		#special handling for intel_mips which use TARGET_DEVICES
 		if [ "$target" = "intel_mips" ]; then
@@ -314,33 +285,31 @@ function genconfig {
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
 		fi
 
-		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
+		echo "$CUSTOMER $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
 		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
-					customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
-					v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
-					cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-				fi
-			done
+		if [ -n "$CUSTOMER" ]; then
+			if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
+				v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
+				cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
+			fi
+			if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
+				v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
+				cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
+			fi
+			if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
+				customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
+				v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
+				cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
+			fi
+			if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+				v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
+				cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
+			fi
+			if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
+				v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
+				cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
+			fi
 		fi
 
 		# Set target version
@@ -362,7 +331,7 @@ function genconfig {
 			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
 			[ $wifilifeAllowed -eq 0 ] && echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		else
-			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
+			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
 			echo "CONFIG_ICE_OPEN=y" >> .config
 			echo "CONFIG_ENDPT_OPEN=y" >> .config
@@ -371,11 +340,6 @@ function genconfig {
 			echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		fi
 
-		if [ -n "$BRCM_MAX_JOBS" ]
-		then
-		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
-		fi
-
 		# Force regeneration of themes
 		touch package/feeds/juci/juci/Makefile
 
@@ -387,19 +351,23 @@ function genconfig {
 		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
 		# so just touch that file.
 		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-
-		# Store generated config
-		cp .config .genconfig.config
-
+				
 		# Set default values based on selected parameters
 		v "$(make defconfig 2>&1)"
 
-		echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+		# Temporary fixup for juci/luci profile
+		if [ "$PROFILE" == "luci" ]; then
+			sed -i '/CONFIG_DEFAULT_juci/d' .config
+			sed -i '/CONFIG_PACKAGE_juci/d' .config
+			sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
+		fi
+
+		if [ $masterconfig -eq 1 ]; then
+			echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+		fi
 
 		# Clean base-file package to force rebuild when changing profile
 		v "$(make package/base-files/clean 2>&1)"
-
-		verify_config
 	}
 
 	####### main #####
@@ -424,7 +392,6 @@ function genconfig {
 			-p|--profile) export PROFILE="$2"; shift;;
 			-r|--repo) export CUSTREPO="$2"; shift;;
 			-s|--override) export SRCTREEOVERR=1;;
-			-S|--brcmsingel) export BRCM_MAX_JOBS=1;;
 			-h|--help) usage;;
 			-l|--list) list_customers 0 $2;;
 			-a|--list-all)list_customers 1;;
@@ -439,10 +406,10 @@ function genconfig {
 			shift;
 		done
 
-		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
+		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
 
 		setup_dirs
-		create_and_copy_files "$@"
+		create_and_copy_files "$1" "$2"
 	fi
 }
 

iop/scripts/generate_tarballs.sh

@@ -14,7 +14,7 @@ build_bcmkernel_consumer() {
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
 	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
 	scp -pv $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
-	ssh $SERVER "[ -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz ] && ln -sf $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz $FPATH/bcmopen-$board-$majver.$minver-latest"
+	ssh $SERVER "[ -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz ] && ln -sf $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz $FPATH/bcmopen-$board-$majver.$minver.tar.gz"
 	rm -f $tarfile
 	cd "$curdir"
 }

iop/scripts/install_key.sh

@@ -10,7 +10,7 @@ function install_key {
     echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
     echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
     echo "tty/0::askfirst:/bin/ash --login" >>files/etc/inittab
-    echo "console::askfirst:/bin/cttyhack /bin/ash --login" >>files/etc/inittab
+    echo "ttyS0::askfirst:/bin/ash --login" >>files/etc/inittab
 
     echo Done
 }

iop/scripts/iopupgrade.sh

@@ -1,326 +0,0 @@
-# this is a developer helper script to install firmware on a remote host with SSH
-
-function upd_usage {
-    echo "usage: $0 iopupgrade -t <host> -f <file> [opts] "
-    echo ""
-    echo "   Default host is 192.168.1.1"
-    echo "   Default firmware file is the newest one found"
-    echo "   Default is to not keep configuration"
-    echo "opts:"
-    echo ""
-    echo "	-i	Interactive use, Allows to select firmware file"
-    echo "	-n	Do not do the final reboot of the target board"
-    echo "	-c	Keep configuration"
-    echo "	-x	Force install even if firmware is not for this board"
-    echo "	-b	Force install of bootloader regardless of version installed"
-    echo "	-s	Use sysupgade. old upgrade method, needed for old releases that do not have iopu"
-}
-
-function set_config_string {
-    eval `grep $1 .config`
-}
-
-function upd_ask_ok {
-    echo "Will Continue with the following settings"
-    echo "-----------------------------------------"
-    printf "%20s: %s\n"  "Firmare file" "$upd_fw_base"
-    printf "%20s: %s\n"  "Host ip" "$upd_host"
-    printf "%20s: " "Reboot";               if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Keep config";          if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Force bootloader";     if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Force image upgrade";  if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Use sysupgrade";       if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    echo "-----------------------------------------"
-
-    if [ "$upd_sysupgrade" == "0" ]
-       then
-	   if [ "$upd_keepconf"   == "1" ] ;then echo "keeping config is just a fantasy it's not yet implemented, try sysupgrade";fi
-    fi
-
-    echo -n "Continue? [Y/n/q]:"
-    read answer
-
-    case $answer in
-	n|N)
-	    return 1;;
-	q|Q)
-	    exit 1;;
-	y|Y|*)
-	    return 0;;
-    esac
-}
-
-function upd_select_file {
-
-    dialog --keep-tite --title "To select file use TAB/ARROW to hilight then press SPACEBAR -> RETURN" \
-	   --fselect "bin/targets/$CONFIG_TARGET_BOARD/generic/" \
-	   $((lines -10)) $((cols -5)) \
-	   2> $tempfile
-
-    new_file=$(cat $tempfile)
-    if [ -n "$new_file" ]
-    then
-	upd_fw="$new_file"
-	upd_fw_base=$(basename $upd_fw);
-    fi
-}
-
-function upd_select_target {
-
-    dialog --keep-tite --title "Input the name/ip number of target board" \
-	   --inputbox "Name/IP" \
-	   $((lines -10)) $((cols -5)) \
-	   "$upd_host" \
-	   2> $tempfile
-
-    new_file=$(cat $tempfile)
-    if [ -n "$new_file" ]
-    then
-	upd_host="$new_file"
-    fi
-}
-
-
-function upd_select_reboot {
-    dialog --keep-tite --radiolist "Should the board reboot after download finished" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Reboot" "Restart board after done"       `if [ "$upd_noreboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "No reboot" "Continue running old system" `if [ "$upd_noreboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"No reboot")
-	    upd_noreboot=1
-	;;
-	"Reboot")
-	    upd_noreboot=0
-	    ;;
-    esac
-}
-
-function upd_select_config {
-    dialog --keep-tite --radiolist "Should the configuration be keept" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Keep" "Keep the config from old system"      `if [ "$upd_keepconf" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Default" "Use default config for new system" `if [ "$upd_keepconf" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Keep")
-	    upd_keepconf=1
-	    ;;
-	"Default")
-	    upd_keepconf=0
-	    ;;
-    esac
-}
-
-function upd_select_forceboot {
-    dialog --keep-tite --radiolist "Should the boot loader be updated reagardless of version installed" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Force" "Alwasy update boot loader"                `if [ "$upd_forceboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Version check" "Only upgrade if version is newer" `if [ "$upd_forceboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Force")
-	    upd_forceboot=1
-	    ;;
-	"Version check")
-	    upd_forceboot=0
-	    ;;
-    esac
-}
-
-function upd_select_forceimage {
-    dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Force" "Dissable sanity check and force use of image (dangerous)" `if [ "$upd_forceimage" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Only compatible" "Normal checks apply"                            `if [ "$upd_forceimage" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Force")
-	    upd_forceimage=1
-	    ;;
-	"Only compatible")
-	    upd_forceimage=0
-	    ;;
-    esac
-}
-
-function upd_select_sysupgrade {
-    dialog --keep-tite --radiolist "Use the old way to upgrade a board" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "iopu" "Use the iop upgrade methode"          `if [ "$upd_sysupgrade" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "sysupgrade" "Use the old sysupgrade methode" `if [ "$upd_sysupgrade" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"iopu")
-	    upd_sysupgrade=0
-	    ;;
-	"sysupgrade")
-	    upd_sysupgrade=1
-	    ;;
-    esac
-}
-
-function upd_select {
-
-    dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select Item to change" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Firmare file" "$upd_fw_base"\
-	   "Host ip" "$upd_host" \
-	   "Reboot"               `if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Keep config"          `if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Force bootloader"     `if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Force image upgrade"  `if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "sysupgrade"           `if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   2> $tempfile
-
-
-    case $(cat $tempfile) in
-	"Firmare file")
-	    upd_select_file
-	    ;;
-	"Host ip")
-	    upd_select_target
-	    ;;
-	"Reboot")
-	    upd_select_reboot
-	    ;;
-	"Keep config")
-	    upd_select_config
-	    ;;
-	"Force bootloader")
-	    upd_select_forceboot
-	    ;;
-	"Force image upgrade")
-	    upd_select_forceimage
-	    ;;
-	"sysupgrade")
-	    upd_select_sysupgrade
-	    ;;
-	*)
-	    return
-	;;
-    esac
-    upd_select
-}
-function upd_select_start {
-    lines=$(tput lines)
-    cols=$(tput cols)
-    tempfile=`tempfile 2>/dev/null` || tempfile=/tmp/test$$
-    trap "rm -f $tempfile" 0 1 2 5 15
-    upd_select
-
-}
-
-function ssh_upgrade {
-    upd_noreboot=0
-    upd_forceboot=0
-    upd_keepconf=0
-    upd_forceimage=0
-    upd_fw_base=""
-    upd_fw=""
-    upd_host="192.168.1.1"
-    upd_sysupgrade=0
-    do_dialog=0
-
-    while getopts "f:hnxt:iscb" opt; do
-	case $opt in
-	    n)
-		upd_noreboot=1
-		;;
-	    x)
-		upd_forceimage=1
-		;;
-	    b)
-		upd_forceboot=1
-		;;
-	    c)
-		upd_keepconf=1
-		;;
-	    v)
-		verbose=$OPTARG
-		;;
-	    f)
-		upd_fw=$OPTARG
-		;;
-	    t)
-		upd_host=$OPTARG
-		;;
-	    i)
-		do_dialog=1
-		;;
-	    s)
-		upd_sysupgrade=1
-		;;
-	    h)
-		upd_usage
-		exit 1
-		;;
-	    \?)
-		echo "Invalid option: -$OPTARG" >&2
-		exit 1
-		;;
-	esac
-    done
-
-    if [ -n "$upd_fw" ]
-    then
-	upd_fw_base=$(basename $upd_fw);
-    else
-	set_config_string CONFIG_TARGET_BOARD
-	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
-
-	for upd_fw_base in $firmwares
-	do
-	    #echo "firmware $upd_fw"
-	    break
-	done
-	upd_fw="bin/targets/$CONFIG_TARGET_BOARD/generic/$upd_fw_base"
-    fi
-
-    [ $do_dialog -eq 1 ] && upd_select_start
-
-    if ! upd_ask_ok
-    then
-	upd_select_start
-	if ! upd_ask_ok
-	then
-	    exit 1
-	fi
-    fi
-
-    if [ ! -f $upd_fw ]
-    then
-	echo "firmware file $firmware do not exist"
-	exit 1
-    fi
-
-    if [ $upd_sysupgrade -eq 0 ]
-    then
-	extra_args=""
-	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -n"
-	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args -x"
-	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
-
-	file_size_kb=`du -k "$upd_fw" | cut -f1`
-	cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
-    else
-	scp $upd_fw root@$upd_host:/tmp/ &&
-	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $3 /tmp/$upd_fw_base" &&
-	    echo "sysupgrade done!"
-    fi
-}
-
-register_command "ssh_upgrade" "-h <host> -f <file> [opts]  Install firmware on remote host with SSH"
-
-

iop/scripts/ssh_sysupgrade.sh

@@ -0,0 +1,56 @@
+# this is a developer helper script to install firmware on a remote host with SSH
+
+function usage {
+	echo "usage: $0 ssh_sysupgrade <host> <file> [opts]"
+}
+
+function ssh_sysupgrade {
+	if [ -z "$1" ] ; then
+		usage
+		echo "Error: host required"
+		exit 1
+	fi
+	if [ -z "$2" ] ; then
+		usage
+		echo "Error: firmware filename required"
+		exit 1
+	fi
+	if [ ! -e $2 ] ; then
+		usage
+		echo "Error: firmware file does not exist"
+		exit 1
+	fi
+	IMAGE=`basename $2`
+	echo "sysupgrade host: $1 with file $IMAGE"
+	[ "$2" ] && [ -e "$2" ] && scp $2 root@$1:/tmp/ && ssh -o ConnectTimeout=60 root@$1 "sysupgrade -v $3 /tmp/$IMAGE" && echo "sysupgrade done!"
+}
+
+register_command "ssh_sysupgrade" "<host> <file> [opts]  Install firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*/*/*.y[23] | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest" "<host> [opts]  Install latest ubifs firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest_w {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest_w <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*.w | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest_w" "<host> [opts]  Install latest jffs2 firmware on remote host with SSH"

iop/scripts/update_feed_branches.sh

@@ -36,17 +36,17 @@ function update_feed_branches {
 		echo "Updating release branch $release to specific commit hash given in feeds.conf for each feed repo"
 	fi
 
-	ifeeds="$(grep -r 'dev.iopsys.eu' feeds.conf | awk '{print$2}' | tr '\n' ' ')"
+	ifeeds="$(grep -r feed_inteno feeds.conf  | awk '{print$2}' | cut -d'_' -f3 | tr '\n' ' ')"
 
 	for f in $ifeeds; do
-		commith=$(grep $f feeds.conf | cut -d'^' -f2)
-		cd $ipath/feeds/$f
+		commith=$(grep feed_inteno_$f feeds.conf | cut -d'^' -f2)
+		cd $ipath/feeds/feed_inteno_$f
 		git branch -D $release 2>/dev/null
-		echo "$f: updating release branch $release to commit $commith"
+		echo "feed_inteno_$f: updating release branch $release to commit $commith"
 		git checkout $commith
 		git push origin :$release
 		git checkout -b $release
-		git push --set-upstream origin $release
+		git push origin $release
 		cd $ipath
 	done
 

iop/scripts/update_package.sh

@@ -496,7 +496,6 @@ check_feeds()
     for feed in `echo $feeds`
     do
 		feed_hash=$(feeds_hash $feed)
-		[ -n "$feed_hash" ] || continue
 		if [ -d feeds/$feed ]; then
 			in_git=$(cd feeds/$feed; git rev-parse HEAD)
 

iopupgrade/Makefile

@@ -1,55 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=iopupgrade
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=01f2afd6c831d6f9eb2940c7e7af16f7e4d439c2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopupgrade
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/iopupgrade
-	CATEGORY:=Utilities
-	TITLE:=Iopsys system upgrade utility
-	URL:=
-#	DEPENDS:=
-endef
-
-define Package/iopupgrade/description
-	Application handling peripheral
-endef
-
-define Package/iopupgrade/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/etc/
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/iopupgrade $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,iopupgrade))
- 

iopupgrade/files/sbin/iopu

@@ -1,278 +0,0 @@
-#!/bin/sh
-
-###############################################################################
-# Global variables. can be used directly in any function called.
-cur_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
-		# eg: rootfs_0 or rootfs_1, currently used
-upd_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
-		# eg: rootfs_0 or rootfs_1, the one we want to update
-cmdline=""	# command line settings.
-cmdline_match="" # Headers to match to the image
-
-###############################################################################
-# file local variables. should not be used in imported functions. Can be used
-# by functions declared in this script
-chroot_cmdline=""	# command line for the iop_chroot command.
-board=""		# string, Board name that is going to be matched
-			# against header of firmware image
-upd_ubi_id=""		# num,	UBI volume number for the volume name
-			# "rootfs_$upd_vol", use to know what volume to run
-			# ubiupdatevol on.
-run_cleanup=0		# if set the cleanup should be run otherwise we skip it.
-run_mount_cleanup=0	# set if we should run umount in cleanup
-upd_kernel=0		# set to 1 if system has the kernel in own mtd partition
-log_stdout=1		# set to 0 to prevent the log to also print to stdout
-upd_noreboot=0		# set to 1 if we should not reboot after programming
-upd_forceimage=0	# set this to force upgrade even if image is for wrong board.
-upd_forceboot=0		# set this to force upgrade of boot loader
-###############################################################################
-# import external functions
-source /lib/upgrade/iopsys.sh
-[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
-
-# only call function if it exists
-function_call() {
-    if type "$1" 2>/dev/null >/dev/null
-    then
-	$1 $@
-    fi
-}
-
-###############################################################################
-# Cleanup and error handling functions.
-function log {
-    TIME=$(date)
-    [ $log_stdout -eq 1 ] && echo "$@"
-    echo "[$TIME] $@" >>/tmp/upd_log
-}
-
-# we need to handle ctrl-c, segmentation fault, sigpipe and other abnormal
-# terminations. no printing to stdout/stderr allowed in this function or
-# anyhting it calls as stdout/stderr might no longer exist
-function finish {
-
-    if [ "$run_cleanup" == "1" ]
-    then
-
-	function_call upd_cleanup
-	log ""
-    fi
-
-    if [ "$run_mount_cleanup" == "1" ]
-    then
-	log "Cleaning up after mount"
-	umount_newroot
-    fi
-    # always kill the timeout process, will leave the sleep but that is harmless
-    # as long as the kill will nerver be run.
-    kill $TIMEOUT_PID 2>/dev/null
-
-    lock -u /tmp/iopu.lock
-}
-
-function sig_pipe {
-    log_stdout=0  # stdin,stdout,stderr do not exist anymore
-    log "Got sigpipe. Turning of log printing to stdout"
-}
-
-# if a timout happens terminate
-function timeout {
-    finish
-    exit 1
-}
-
-# Not much that can be done if the mount fails but to try again.
-# if after 10 seconds there still is errors abort program.
-# UBIFS has some wierd time intervall after ubiupdatevol where
-# a mount of the newly written data results in a busy error.
-function mount_retry {
-    local tries=0
-
-    while [ $tries -lt 10 ]
-    do
-	if mount $@ 2>/dev/null
-	then
-	    return
-	fi
-	tries=$((tries + 1))
-	sleep 1
-    done
-
-    log "mount failed for command [mount $@] so upgrade failed."
-
-    exit 1
-}
-
-function mount_newroot {
-    run_mount_cleanup=1
-    mkdir -p /tmp/newroot
-    mkdir -p /tmp/newroot_overlay
-
-    mount_retry -t ubifs ubi0:rootfs_$upd_vol /tmp/newroot
-
-    mount_retry -o noatime,lowerdir=/tmp/newroot,upperdir=/tmp/newroot/overlay,workdir=/tmp/newroot/lib/overlay.tmp -t overlay "overlayfs:/tmp/newroot/overlay" /tmp/newroot_overlay
-    mount_retry --bind /tmp/newroot/ /tmp/newroot_overlay/rom
-
-    mount_retry --bind /dev /tmp/newroot_overlay/dev
-    mount_retry --bind /proc /tmp/newroot_overlay/proc
-    mount_retry --bind /sys /tmp/newroot_overlay/sys
-    mount_retry -t tmpfs -o noatime,mode=0755 root /tmp/newroot_overlay/tmp
-
-    mkdir -p /tmp/newroot_overlay/tmp/oldroot
-    mount_retry --bind / /tmp/newroot_overlay/tmp/oldroot
-    mount_retry --bind /tmp /tmp/newroot_overlay/tmp/oldroot/tmp
-}
-
-function umount_newroot {
-    umount /tmp/newroot_overlay/tmp/oldroot/tmp
-    umount /tmp/newroot_overlay/tmp/oldroot
-    umount /tmp/newroot_overlay/tmp
-    umount /tmp/newroot_overlay/sys
-    umount /tmp/newroot_overlay/proc
-    umount /tmp/newroot_overlay/dev
-    umount /tmp/newroot_overlay/rom
-    umount /tmp/newroot_overlay
-    umount /tmp/newroot
-    run_mount_cleanup=0
-}
-
-function usage {
-    echo "usage: $0 iopu [opts] "
-    echo ""
-    echo "opts:"
-    echo ""
-    echo "	-n	Do not do the final reboot of the target board"
-    echo "	-c	Keep configuration"
-    echo "	-x	Force install even if firmware is not for this board"
-    echo "	-b	Force install of bootloader regardless of version installed"
-    echo "	-r	Jump into chroot env of other system"
-}
-
-###############################################################################
-
-# just one instance
-# this check has to be done before we install handler to avoid removing the
-# lock even if it was not available.
-if  ! lock -n /tmp/iopu.lock
-then
-    echo "Another instance of iopu already running"
-    echo "If you are sure this is wrong remove file /tmp/iopu.lock"
-    exit 1
-fi
-
-trap finish EXIT
-trap timeout SIGALRM
-trap sig_pipe SIGPIPE
-
-while getopts "nrxb" opt; do
-    case $opt in
-	n)
-	    upd_noreboot=1
-	    ;;
-	x)
-	    upd_forceimage=1
-	    ;;
-	b)
-	    upd_forceboot=1
-	    ;;
-	r)
-	    upd_vol=$(get_flashbank_next)
-	    mount_newroot
-	    (ENV=/sbin/iopu_chroot_env chroot /tmp/newroot_overlay /bin/sh)
-	    echo ""
-	    umount_newroot
-	    exit 0
-	    ;;
-	h)
-	    upd_usage
-	    exit 1
-	    ;;
-    esac
-done
-
-# put a timeout on this if it takes longer than 120 seconds we should abort
-# and clean up
-(
-sleep 120	# if 2 minutes pass
-kill -ALRM $$	2>/dev/null # send it a SIGALRM signal
-)&
-TIMEOUT_PID=$!
-
-log "Firmware upgrade started"
-
-# Should board name be checked
-if [ $upd_forceimage -eq 0 ]
-then
-   board=$(db get hw.board.iopVerBoard)
-   cmdline_match="board=$board"
-fi
-
-# find out what rootfs volume is active. 
-cur_vol=$(get_flashbank_current)
-upd_vol=$(get_flashbank_next)
-
-# convert volume name "rootfs_$upd_vol" into ubifs volume id
-upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
-log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
-
-# prepare to match dsl.
-function_call upd_conf_dsl
-
-# prepare to update CFE if it exists
-function_call upd_conf_cfe
-
-# prepare to update kernel if it is stored in MTD/JFFS2 
-function_call upd_conf_kernel
-
-log "now starting writing data to flash with [ iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id ]"
-run_cleanup=1	# When we start to actually write data there might be some
-		# things that need cleanup if we get an error/crash
-iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id
-
-# in case of any error we abort
-if [ $? -ne 0 ]; then
-    log "iopupgrade program Failed"
-    exit 1
-fi
-
-log "Firmware programmed to flash."
-
-
-log "Transfering configuration to new system."
-
-# Force upgrade of boot loader
-[ $upd_forceboot -eq 1 ] && chroot_cmdline="$chroot_cmdline -b"
-
-mount_newroot
-chroot /tmp/newroot_overlay /sbin/iopu_chroot $chroot_cmdline
-umount_newroot
-
-log "Update fully installed."
-run_cleanup=0
-
-# Now make sure that we actually boot the new system on the next reboot
-upd_finnish
-
-# spawn the reboot to a subshell to allow the main program to quit before reset
-# to avoid any hanged network connection like ssh
-if [ $upd_noreboot -eq 0 ]
-then
-    (
-	log_stdout=0	# stdin,stdout,stderr do not exist anymore, we are in a
-			# subshell and then the trap is no longer working.
-	sleep 1
-	log "Rebooting NOW!!!"
-	log ""
-	reboot
-    )&
-    log "Reboot initiated"
-else
-    log "Skipping reboot"
-fi
-
-
-
-
-
-
-

iopupgrade/files/sbin/iopu_chroot

@@ -1,61 +0,0 @@
-#!/bin/sh
-#
-# This program is intended to be run in a chroot environment where the old system
-# is mounted in /tmp/oldroot
-#
-
-
-###############################################################################
-# Global variables. can be used directly in any function called.
-
-
-###############################################################################
-# file local variables. should not be used in imported functions. Can be used
-# by functions declared in this script
-upd_forceboot=0
-log_stdout=1		# set to 0 to prevent the log to also print to stdout
-
-###############################################################################
-# import external functions
-
-source /lib/upgrade/iopsys.sh
-[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
-
-
-# only call function if it exists
-function_call() {
-    if type "$1" 2>/dev/null >/dev/null
-    then
-	$1 $@
-    fi
-}
-# Cleanup and error handling functions.
-function log {
-    TIME=$(date)
-    [ $log_stdout -eq 1 ] && echo "$@"
-    echo "[$TIME] $@" >>/root/upd_log
-}
-
-
-while getopts "hb" opt; do
-    case $opt in
-	h)
-	    upd_usage
-	    exit 1
-	    ;;
-	b)
-	    upd_forceboot=1
-	    ;;
-	\?)
-	    echo "Invalid option: -$OPTARG" >&2
-	    exit 1
-	    ;;
-    esac
-done
-
-# copy old install log over
-cp /tmp/oldroot/tmp/upd_log /root/upd_log
-
-# Upgrade boot loader if needed.
-function_call upd_program_boot
-

iopupgrade/files/sbin/iopu_chroot_env

@@ -1,18 +0,0 @@
-#!/bin/sh
-# this is run when "iopr -r" is executed.
-# intended to just show what environment is actually started.
-
-cat /etc/banner
-
-echo "/tmp/oldroot:"
-echo "	Contains the running root filesystem. It is live so files are in use"
-echo "	Anything copying/reading files from there needs to make sure it is done safely."
-echo ""
-
-Color_Off='\033[0m'       # Text Reset
-Red='\033[0;31m'          # Red
-
-PS1="${Red}chroot_new${Color_Off}:\w\#"
-export PS1
-export Red
-export Color_Off

libjwt/Makefile

@@ -1,52 +0,0 @@
-
-# Copyright (C) 2018 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libjwt
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=866607c7741421c8ac99876e7201eb32d9af1b92
-PKG_SOURCE_URL:=https://github.com/benmcollins/libjwt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libjwt
-  CATEGORY:=Libraries
-  DEPENDS:=+libopenssl +jansson
-  TITLE:= libjwt
-endef
-
-
-#TARGET_CFLAGS += \
-#	-I$(STAGING_DIR)/usr/include
-#	-I$(STAGING_DIR)/usr/include/libnl3
-
-#MAKE_FLAGS += \
-#	CFLAGS="$(TARGET_CFLAGS)" \
-#	LDFLAGS="$(TARGET_LDFLAGS)" \
-#	FPIC="$(FPIC)" \
-#	PLATFORM="$(TARGET_PLATFORM)" \
-#	subdirs="$(subdirs)"
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/include/jwt.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-define Package/libjwt/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libjwt))

ltq-nand/Makefile

@@ -1,33 +0,0 @@
-#
-# Copyright (C) 2008-2016 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ltq-nand
-PKG_VERSION:=1.0
-
-PKG_SOURCE:=v$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/archive/
-#PKG_SOURCE_PROTO:=git
-#PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/releases/download/v$(PKG_VERSION)/
-#PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand.git
-#PKG_SOURCE_VERSION:=07b5b0331af6de4174dab2c02bf260ee9625452a
-
-include $(INCLUDE_DIR)/host-build.mk
-
-
-define Host/Compile
-	$(MAKE) -C $(HOST_BUILD_DIR)
-endef
-
-define Host/Install
-	$(CP) \
-		$(HOST_BUILD_DIR)/ltq-nand \
-		$(STAGING_DIR_HOST)/bin/
-endef
-
-$(eval $(call HostBuild))
-

mqtt-ciotc/Makefile

@@ -1,37 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=mqtt-ciotc
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=00da3fb1f1691d836037dc4d93e38d0835ba46a4
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifilife-testbed.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mqtt-ciotc
-	CATEGORY:=Utilities
-	DEPENDS:=+libjwt +lib-paho-mqtt +libopenssl +libubox +ubus +libblobmsg-json
-	TITLE:=mqtt google iot clinet
-endef
-
-define Package/mqtt-ciotc/description
-	mqtt google iot client
-endef
-
-define Package/mqtt-ciotc/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mqtt_ciotc $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,mqtt-ciotc))

mqtt-ciotc/files/etc/config/mqtt_ciotc

@@ -1,3 +0,0 @@
-config certs 'certs'
-	option private '/etc/mqtt-ciotc/rsa_private.pem'
-	option root '/etc/mqtt-ciotc/roots.pem'

mqtt-ciotc/files/etc/init.d/mqtt_ciotc

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=96
-STOP=10
-PROG=/sbin/mqtt_ciotc
-
-USE_PROCD=1
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	config_load mqtt_ciotc
-	config_get private certs private
-	config_get root certs root
-
-	[ -n $private ] && procd_append_param command --private-cert $private
-	[ -n $root ] && procd_append_param command --root-cert $root
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service()
-{
-	service_stop ${PROG}
-}
-
-reload_service() {
-#	procd_send_signal wifilife # use SIGHUP
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger "mqtt_ciotc"
-}

ndt/Makefile

@@ -1,33 +0,0 @@
-#
-# This is free software, See /COPYRIGHT for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ndt
-PKG_VERSION:=3.6.4
-PKG_RELEASE:=3
-
-PKG_BUILD_DIR:=${BUILD_DIR}/ndt-$(PKG_VERSION)
-PKG_SOURCE:=ndt-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://software.internet2.edu/sources/ndt
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ndt
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +zlib
-	TITLE:=Network Testing Tool
-endef
-
-define Build/Compile/Default
-	$(MAKE) -C $(PKG_BUILD_DIR)
-endef
-
-define Package/ndt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(CP) $(PKG_BUILD_DIR)/src/web100clt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ndt))
-

netmode/Makefile

@@ -3,7 +3,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=netmode
 PKG_VERSION:=0.2.0
 
-PKG_SOURCE_VERSION:=9fa23664b3bdd963e4556f5921c9f9be1c9c578f
+PKG_SOURCE_VERSION:=82fd6c196a3b990e105cef867a69ce52979b27fa
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/netmoded
 

netmode/files/etc/config/netmode

@@ -4,6 +4,6 @@ config mode 'setup'
         option curmode 'routed'
 
 config tools 'tools'
-	option wificontrol 0
+	option wificontrol 1
 	option arp_discovery 1
 

netmode/files/etc/hotplug.d/iface/01-netmode-handler

@@ -2,9 +2,6 @@
 
 [ "$INTERFACE" != "wan" ] && exit
 
-automode="$(uci -q get netmode.setup.automode)"
-[ "$automode" == "0" ] && exit
-
 . /lib/functions.sh
 . /lib/functions/network.sh
 . /lib/functions/netmode.sh

netmode/files/etc/netmodes/bridged/wireless

@@ -18,7 +18,7 @@ config wifi-device 'wl0'
 	option bandwidth '80'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -47,10 +47,10 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps_pushbutton '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl0'
 
 config wifi-device 'wl1'
@@ -60,7 +60,7 @@ config wifi-device 'wl1'
 	option bandwidth '20'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -87,9 +87,9 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps_pushbutton '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl1'
 

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/post/apply_wet_cfg.sh

@@ -1,38 +0,0 @@
-#if wet in wireless config and SSID nad KEY was saved for it, apply to config
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-parse_wet_json()
-{
-	local interface=$1
-	local mode key encryption ssid connect_bssid
-
-	config_get mode $interface mode
-	[ "$mode" = "wet" ] || return
-
-	json_load "$(cat /tmp/netmodecfg)" 2> /dev/null
-	json_get_var ssid ssid
-	json_get_var key key
-	json_get_var encryption encryption
-	json_get_var connect_bssid connect_bssid
-
-	uci -q set wireless.$1.key="$key"
-	uci -q set wireless.$1.encryption="$encryption"
-	uci -q set wireless.$1.ssid="$ssid"
-	uci -q set wireless.$1.connect_bssid="$connect_bssid"
-	uci commit wireless
-}
-
-apply_wet_cfg()
-{
-	[ -f /tmp/netmodecfg ] || return
-
-	config_load wireless
-	config_foreach parse_wet_json "wifi-iface"
-
-	rm /tmp/netmodecfg 2> /dev/null
-}
-
-apply_wet_cfg

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/save_wet_cfg.sh

@@ -1,38 +0,0 @@
-#if mode wet in wireless config has SSID Key, save them
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-parse_wet_cfg()
-{
-	local interface=$1
-	local mode key encryption ssid connect_bssid
-
-	config_get mode $interface mode
-	[ "$mode" = "wet" ] || return
-
-	config_get ssid $interface ssid
-	config_get key $interface key
-	config_get encryption $interface encryption
-	config_get connect_bssid $interface connect_bssid
-
-	[ -n "$key" ] || return
-	[ -n "$encryption" ] || return
-
-	json_init
-	json_add_string "ssid" "$ssid"
-	json_add_string "key" "$key"
-	json_add_string "encryption" "$encryption"
-	json_add_string "connect_bssid" "$connect_bssid"
-
-	echo "`json_dump`" > /tmp/netmodecfg
-}
-
-save_wet_cfg()
-{
-	config_load wireless
-	config_foreach parse_wet_cfg "wifi-iface"
-}
-
-save_wet_cfg

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -27,7 +27,7 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	ra0
-	option wps_pushbutton	1
+	option wps_pbc	1
 
 config wifi-device  rai0
 	option band a
@@ -46,7 +46,7 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	rai0
-	option wps_pushbutton	1
+	option wps_pbc	1
 
 config wifi-iface
 	option device   rai0

netmode/files/etc/netmodes/routed_brcm/wireless

@@ -18,7 +18,7 @@ config wifi-device 'wl0'
 	option bandwidth '80'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -47,10 +47,10 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps_pushbutton '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl0'
 
 config wifi-device 'wl1'
@@ -60,7 +60,7 @@ config wifi-device 'wl1'
 	option bandwidth '20'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -87,9 +87,9 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps_pushbutton '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl1'
 

netmode/files/etc/netmodes/routed_mtk/wireless

@@ -18,7 +18,6 @@ config wifi-device  ra0
 	option hwmode   auto
 	option htmode   HT20
 	option country 'DE'
-	option scantimer '60'
 
 config wifi-iface
 	option device   ra0
@@ -27,7 +26,7 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps_pushbutton	1
+	option wps_pbc	1
 	option ifname	ra0
 
 config wifi-device  rai0
@@ -38,7 +37,6 @@ config wifi-device  rai0
 	option htmode   VHT80
 	option country 'DE'
 	option beamforming 1
-	option scantimer '60'
 
 config wifi-iface
 	option device   rai0
@@ -47,6 +45,6 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps_pushbutton	1
+	option wps_pbc	1
 	option ifname	rai0
 

netmode/files/lib/functions/netmode.sh

@@ -180,7 +180,6 @@ switch_netmode() {
 	run_netmode_scripts $curmode "pre"
 
 	logger -s -p user.info -t $0 "[netmode] Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
-
 	for file in $(ls /etc/netmodes/$curmode/); do
 		case "$file" in
 			DETAILS|scripts) continue ;;
@@ -189,9 +188,6 @@ switch_netmode() {
 	done
 	sync
 
-	#commit owsd to reload all init.d scripts dependent on its config
-	ubus call uci commit '{"config":"owsd"}'
-
 	local reboot=$(uci -q get netmode.$curmode.reboot)
 
 	if [ "$reboot" != "0" ]; then
@@ -386,9 +382,7 @@ populate_netmodes() {
 			if json_select acl; then
 				_i=1
 				while json_get_var user $_i; do
-					uci del_list netmode.$mode._access_r="$user"
 					uci del_list netmode.$mode._access_w="$user"
-					uci add_list netmode.$mode._access_r="$user"
 					uci add_list netmode.$mode._access_w="$user"
 					_i=$((_i+1))
 				done

owsd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2018 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -10,9 +10,10 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=f0eedeb6fd061edf3784d6bf86fa60b176bf3fe7
+PKG_SOURCE_VERSION:=b3f52463a50d56af80bfd8b3f63960885379f150
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS

owsd/files/owsd.init

@@ -308,10 +308,10 @@ start_service() {
 	procd_close_instance
 }
 
-#stop_service()
-#{
-#	service_stop ${PROG}
-#}
+stop_service()
+{
+	service_stop ${PROG}
+}
 
 reload_service() {
         stop

paho-mqtt-c/Makefile

@@ -1,43 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=lib-paho-mqtt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=9f715d0862a8e16099b5837c4e53a1bf6a6a0675
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/eclipse/paho.mqtt.c.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/lib-paho-mqtt
-	CATEGORY:=Libraries
-	DEPENDS:=+libopenssl
-	TITLE:=package for mqtt stuff
-endef
-
-
-define Package/lib-paho-mqtt/description
-	a library
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/ $(1)/usr/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-define	Package/lib-paho-mqtt/install
-	$(INSTALL_DIR) $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,lib-paho-mqtt))

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=769430115b6dd984313574c3fa2a6d99c65cd223
+PKG_SOURCE_VERSION:=fe43108d986a02d3a14f079d58bfa666c1089471
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
 

questd/Makefile

@@ -1,14 +1,14 @@
 #
-# Copyright (C) 2013-2019 iopsys
+# Copyright (C) 2013 Inteno
 #
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=4.0.1
+PKG_VERSION:=3.1.40
 
-PKG_SOURCE_VERSION:=d19501b6f80ef649b2ffd2f87132df885ce4581f
+PKG_SOURCE_VERSION:=7a0a7427d339736e3ee555e816d40c985651632c
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
 
@@ -27,7 +27,7 @@ else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
 QUESTD_TARGET:=-DIOPSYS_MARVELL
 else ifeq ($(CONFIG_TARGET_intel_mips),y)
 # BUG FIXME the Intel mips target is not handled in questd this is just to get it to compile
-QUESTD_TARGET:=-DIOPSYS_INTEL
+QUESTD_TARGET:=-DIOPSYS_BROADCOM
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
 QUESTD_TARGET:=-DIOPSYS_MEDIATEK
 QUESTD_CFLAGS:=\

rulengd/Makefile

@@ -1,20 +1,21 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2018 Inteno
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=rulengd
-PKG_VERSION:=1.1.0
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_PARALLEL:=1
 PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/rulengd.git
-PKG_SOURCE_VERSION:=63569245b62d90d3106cc826f2d2b18f51c0b885
+PKG_SOURCE_VERSION:=99881f39232154530ac129dc2109d78963017ad1
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 

samba3/files/samba.init

@@ -11,11 +11,6 @@ useradd()
 	local password
 	config_get user $1 user
 	config_get password $1 password
-
-        filter="0A;5C 6E"
-        [ "$(hex_filter "$user" "$filter" 1)" = "" ] || return
-        [ "$(hex_filter "$password" "$filter" 1)" = "" ] || return
-
 	if ! $(grep -rq "^$user:" /etc/passwd) ; then
 		echo "adding user $user"
 		adduser $user -s /bin/false -D -H -h /mnt/$user -g "samba,pass=$password" && smbpasswd $user $password
@@ -56,46 +51,6 @@ purgepasswd()
 	done
 }
 
-hex_filter() {
-	local string=$1
-	local hex_chars=$2
-	local wc_max=$3
-	local wc_tot=0
-
-	if [ -z "$string" -o -z "$hex_chars" -o -z "$wc_max" ]
-	then
-		return;
-	fi
-
-	dump=$(echo "$string" | hexdump -v -e '32/1 "%02X ""\n"')
-
-	IFS=';'
-	for i in $hex_chars;
-	do
-		local filtered
-
-		IFS=' '
-		filtered=${dump//$i/}
-
-		set -- $i
-		divider=$#
-
-		set -- $dump
-		start=$#
-
-		set -- $filtered
-		end=$#
-
-		wc=$((start-end))
-		wc=$((wc/divider))
-
-		[ $wc -eq 0 ] || wc_tot=$((wc_tot+wc))
-		IFS=';'
-	done
-
-	[ $wc_tot -gt $wc_max ] && echo "corrupt"
-}
-
 smb_header() {
 	local interface
 	config_get interface $1 interface
@@ -125,12 +80,11 @@ smb_header() {
 	config_get description $1 description "Samba on ${hostname:-OpenWrt}"
 	config_get charset     $1 charset     "UTF-8"
 
-	filter="0A;5C 6E"
-	[ "$(hex_filter "$name" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$workgroup" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$description" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$interfaces" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$charset" "$filter" 1)" = "" ] || exit
+	name=`echo -e "$name" | head -1`
+	workgroup=`echo -e "$workgroup" | head -1`
+	description=`echo -e "$description" | head -1`
+	interfaces=`echo -e "$interfaces" | head -1`
+	charset=`echo -e "$charset" | head -1`
 
 	mkdir -p /var/etc
 	sed -e "s#|NAME|#$name#g" \
@@ -190,22 +144,13 @@ smb_add_share() {
 	path=$(readlink -f $path)
 	[ "${path:0:4}" == "/mnt" ] || path="/mnt/"
 
-	filter="0A;5C 6E"
-	[ "$(hex_filter "$name" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$users" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$read_only" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$guest_ok" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$create_mask" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$dir_mask" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$browseable" "$filter" 1)" = "" ] || return
-
-	echo -e "\n[$name]\n\tpath = $path" >> /var/etc/smb.conf
-	[ -n "$users" ] && echo -e "\tvalid users = $users" >> /var/etc/smb.conf
-	[ -n "$read_only" ] && echo -e "\tread only = $read_only" >> /var/etc/smb.conf
-	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" >> /var/etc/smb.conf
-	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" >> /var/etc/smb.conf
-	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" >> /var/etc/smb.conf
-	[ -n "$browseable" ] && echo -e "\tbrowseable = $browseable" >> /var/etc/smb.conf
+	echo -e "\n[$name]\n\tpath = ${path%%\\n*}" >> /var/etc/smb.conf
+	[ -n "$users" ] && echo -e "\tvalid users = $users" | head -1 >> /var/etc/smb.conf
+	[ -n "$read_only" ] && echo -e "\tread only = $read_only" | head -1 >> /var/etc/smb.conf
+	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" | head -1 >> /var/etc/smb.conf
+	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" | head -1 >> /var/etc/smb.conf
+	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" | head -1 >> /var/etc/smb.conf
+	[ -n "$browseable" ] && echo -e "\tbrowseable = $browseable" | head -1 >> /var/etc/smb.conf
 }
 
 start_service() {

syslog-ng3/Makefile

@@ -0,0 +1,72 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=syslog-ng
+PKG_VERSION:=3.0.5
+PKG_RELEASE:=5
+
+PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/$(PKG_VERSION)/source/
+PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
+PKG_MD5SUM:=28f0d9ff2243b330e8cd6311ef9b2f12
+
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_IPV6 \
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/syslog-ng3
+  SECTION:=admin
+  CATEGORY:=Administration
+  DEPENDS:=+libpcre +glib2 +libeventlog +libopenssl +libwrap +libpthread +librt +zlib +libdbi
+  TITLE:=A powerful syslog daemon
+  URL:=http://www.balabit.com/network-security/syslog-ng/opensource-logging-system/
+endef
+
+define Package/syslog-ng3/description
+  syslog-ng reads and logs messages to the system console, log
+  files, other machines and/or users as specified by its
+  configuration file.
+endef
+
+define Package/syslog-ng3/conffiles
+/etc/syslog-ng.conf
+endef
+
+define Build/Configure
+	$(SED) 's,-I/usr/include,,' $(PKG_BUILD_DIR)/configure
+	$(Build/Configure/Default)
+endef
+
+CONFIGURE_ARGS +=  \
+	$(call autoconf_bool,CONFIG_IPV6,ipv6) \
+	--disable-dependency-tracking \
+	--enable-tcp-wrapper \
+	--disable-glibtest \
+	--disable-spoof-source \
+	--disable-sql \
+	--enable-prce \
+	--disable-linux-caps \
+
+TARGET_CPPFLAGS += \
+	-I$(STAGING_DIR)/usr/include/eventlog
+
+CONFIGURE_VARS += \
+	LIBDBI_CFLAGS="-I$(STAGING_DIR)/usr/include"
+
+define Package/syslog-ng3/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/syslog-ng $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/syslog-ng.init $(1)/etc/init.d/syslog-ng
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DATA) ./files/syslog-ng.conf $(1)/etc
+endef
+
+$(eval $(call BuildPackage,syslog-ng3))

syslog-ng3/files/syslog-ng.conf

@@ -0,0 +1,37 @@
+@version:3.0
+
+options {
+	chain_hostnames(no);
+	create_dirs(yes);
+	flush_lines(0);
+	keep_hostname(yes);
+	log_fifo_size(256);
+	log_msg_size(1024);
+	stats_freq(0);
+	flush_lines(0);
+	use_fqdn(no);
+};
+
+source src {
+	internal();
+	unix-stream("/dev/log");
+};
+
+source net {
+	udp(ip(0.0.0.0) port(514));
+};
+
+source kernel {
+        file("/proc/kmsg" program_override("kernel"));
+};
+
+destination messages {
+	file("/var/log/messages");
+};
+
+log {
+	source(src);
+	source(net);
+        source(kernel);
+	destination(messages);
+};

syslog-ng3/files/syslog-ng.init

@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2011 OpenWrt.org
+
+START=50
+
+SERVICE_USE_PID=1
+
+start() {
+	[ -f /etc/syslog-ng.conf ] || return 1
+	service_start /usr/sbin/syslog-ng
+}
+
+stop() {
+	service_stop /usr/sbin/syslog-ng
+}
+
+reload() {
+	service_reload /usr/sbin/syslog-ng
+}

syslog-ng3/patches/001-fix-libconv_so_2-not-found-error

@@ -0,0 +1,12 @@
+--- a/configure
++++ b/configure
+@@ -7357,6 +7357,9 @@ dynamic_threads () {
+ 	esac
+ }
+ 
++GLIB_LIBS="-Wl,-rpath-link=$STAGING_DIR/usr/lib/libiconv-full/lib $GLIB_LIBS"
++LIBS="-Wl,-rpath-link=$STAGING_DIR/usr/lib/libiconv-full/lib $LIBS"
++
+ case "$ostype" in
+ 	FreeBSD)
+ 		GLIB_LIBS="$GLIB_LIBS -lintl"

topologyd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2013 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=topologyd
 PKG_VERSION:=0.1
 
-PKG_SOURCE_VERSION:=23b812bb512189487484182ab736e957d54da9f3
+PKG_SOURCE_VERSION:=b520fe65d2469ff52cc70328fce753f67cf998e5
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/topologyd.git
 

topologyd/files/etc/init.d/topologyd

@@ -17,7 +17,7 @@ start_service() {
 	fi
 
 	procd_set_param respawn
-#	procd_set_param stdout 1
+	procd_set_param stdout 1
 	procd_set_param stderr 1
 	procd_close_instance
 }

uboot/Makefile

@@ -14,7 +14,7 @@ PKG_SOURCE_PROTO:=git
 
 ifdef CONFIG_TARGET_intel_mips
 PKG_SOURCE_URL:=git@dev.iopsys.eu:intel/uboot.git
-PKG_SOURCE_VERSION:=15e223e20e5680bc446e84b4d8b5bce06b45fb1b
+PKG_SOURCE_VERSION:=b3bc3af5831f14d9cd4d983522bc45a1fd9fa26c
 else
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/uboot.git
 PKG_SOURCE_VERSION:=3ef2ba866a99205496e0ce01935c89a1778d9b85
@@ -59,30 +59,21 @@ define uboot/grx500
   TITLE:=U-Boot for the grx
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=10
+  PKG_RELEASE:=5
 endef
 
-# obsolete: no longer supported
 define uboot/grx500_speedport_smart3
   TITLE:=U-Boot for the Speedport Smart3
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=7
-endef
-
-define uboot/grx500_norrland
-  TITLE:=U-Boot for Norrland Board
-  UBOOT_IMG:=u-boot-nand.bin
-  DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=11
+  PKG_RELEASE:=5
 endef
 
 UBOOTS := \
 	ex400 \
 	sdx810_ap \
 	grx500 \
-	grx500_speedport_smart3 \
-	grx500_norrland
+	grx500_speedport_smart3
 
 define Package/uboot/template
 define Package/uboot-$(1)
@@ -104,14 +95,13 @@ ifdef BUILD_VARIANT
 $(eval $(call uboot/$(BUILD_VARIANT)))
 UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
 UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
-UBOOT_IOPSYS_VERSION:=$(PKG_RELEASE)
 endif
 
 define Build/Configure
 	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
 		$(UBOOT_CONFIG)_config
 
-	$(SED) "s,CONFIG_INTENO_MAJOR=\"0\",CONFIG_INTENO_MAJOR=\"$(UBOOT_IOPSYS_VERSION)\"," $(PKG_BUILD_DIR)/.config
+	$(SED) "s,CONFIG_INTENO_MAJOR=\"0\",CONFIG_INTENO_MAJOR=\"$(PKG_RELEASE)\"," $(PKG_BUILD_DIR)/.config
 
 	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
 		oldconfig
@@ -124,13 +114,8 @@ define Build/Compile
 		CROSS_COMPILE=$(TARGET_CROSS) env
 endef
 
-# don't install /etc/init.d/uboot for intel-mips as it's not needed
 define Package/uboot/install/default
-	$(INSTALL_DIR) $$(1)/lib/upgrade
-	$(CP) ./files/uboot-upgrade $$(1)/lib/upgrade/
-	$(if $(CONFIG_TARGET_intel_mips), ,$(INSTALL_DIR) $$(1)/etc/init.d)
-	$(if $(CONFIG_TARGET_intel_mips), ,$(CP) ./files/uboot $$(1)/etc/init.d/)
-
+	$(CP) ./files/* $$(1)/
 	$(INSTALL_DIR) $(BIN_DIR)/$(TARGET)
 	$(INSTALL_DIR) $$(1)/boot
 	$(CP) \

uboot/files/etc/init.d/uboot

@@ -1,6 +1,10 @@
+#!/bin/sh /etc/rc.common
+
+START=50
 
 . /usr/share/libubox/jshn.sh
 
+
 sanity_check_env(){
 
     # make sure iboot is used to start board, but only if verify_boot != 1
@@ -22,35 +26,25 @@ sanity_check_env(){
     fw_setenv baudrate 115200
 }
 
-do_uboot_upgrade(){
+uboot_upgrade(){
     local u_ver
     echo "doing upgrade of u-boot old version $cur_Major.$cur_Minor new version $Major.$Minor"
     mtd erase /dev/mtd0
-    mtd write $1 /dev/mtd0
+    mtd write /boot/uboot.img /dev/mtd0
     u_ver=$(strings  /dev/mtd0 | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb)
     [ -n "$u_ver" ] && fw_setenv uboot_inteno_version "$u_ver"
     sanity_check_env
 }
 
 
-# Return:
-# 0: update is successfull
-# 1: update is not needed
-# 2: error occured
-uboot_upgrade() {
-    [ ! -f $1 ] && return 2
-
+start() {
     iver=$(fw_printenv -n uboot_inteno_version 2>/dev/null)
 
-    # Fixup improper json string for major and minor key.
-    # this adds the missing "
-    iver=$(echo $iver | sed -e 's/{Major:/{"Major":/' | sed -e 's/,Minor:/,"Minor":/')
-    
     if [ -z "$iver" ]
     then
 	# if this variable is not set by u-boot the u-boot version is too old.
-	do_uboot_upgrade $1
-	return 0
+	uboot_upgrade
+	return
     fi
 
     # read in current version into Major Minor variables
@@ -65,7 +59,7 @@ uboot_upgrade() {
     cur_Minor=$Minor
 
     # read in new uboot version into Major Minor variables
-    json_load $(strings $1 | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb |sed -e 's/938f0820-2ffb-11e7-bbc9-2f21351ee6fb: //')
+    json_load $(strings /boot/uboot.img | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb |sed -e 's/938f0820-2ffb-11e7-bbc9-2f21351ee6fb: //')
     json_get_vars Major Minor
 
 #    echo "Major $Major"
@@ -73,15 +67,14 @@ uboot_upgrade() {
     
     if [ $Major -gt $cur_Major ]
     then
-	do_uboot_upgrade $1
-	return 0
+	uboot_upgrade
+	return
     fi
 
     if [ $Major -eq $cur_Major -a $Minor -gt $cur_Minor ]
     then
-	do_uboot_upgrade $1
-	return 0
+	uboot_upgrade
+	return
     fi
-
-    return 1
 }
+

uboot/files/uboot

@@ -1,8 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=50
-
-start() {
-	. /lib/upgrade/uboot-upgrade
-	uboot_upgrade /boot/uboot.img
-}

uspd/Makefile

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2019 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=uspd
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a5fba2890d05e868605431dacd32ffda4bdc232d
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/uspd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=USP ubus backend
-  DEPENDS:=+libubox +ubus +icwmp-curl
-endef
-
-define Package/uspd/description
- Ubus based backend for TR-369/USP which can be used by other USP agents
- running on top of it.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
-
-#define Build/Prepare
-#        $(CP) -rf ./uspd/* $(PKG_BUILD_DIR)/
-#endef
-
-define Package/uspd/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/uspd.init $(1)/etc/init.d/uspd
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uspd $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,uspd))

uspd/files/uspd.init

@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=94
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/uspd
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}

voice-client/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2014 iopsys
+# Copyright (C) 2014 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -11,19 +11,6 @@ PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-VOICE_LIB:=broadcom.sh
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-VOICE_LIB:=broadcom.sh
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-VOICE_LIB:=intel.sh
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-VOICE_LIB:=broadcom.sh
-else
-$(info (UNEXPECTED CONFIG TARGET))
-VOICE_LIB:=broadcom.sh
-endif
-
 define Package/voice-client
   SUBMENU:=Telephony
   SECTION:=net
@@ -45,26 +32,7 @@ define Build/Compile
 endef
 
 define Package/voice-client/install
-	$(CP) ./files/etc $(1)/
-	$(CP) ./files/sbin $(1)/
-	$(CP) ./files/usr $(1)/
-	mkdir -p $(1)/lib/voice
-	$(CP) ./files/lib/cw.sh $(1)/lib/.
-	$(CP) ./files/lib/voice/$(VOICE_LIB) $(1)/lib/voice/voicelib.sh
-
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	sed -i \
-	-e 's/brcm/tapi/g' \
-	-e 's/BRCM/TAPI/g' \
-	-e 's/broadcom/intel/g' \
-	$(1)/etc/config/voice_client \
-	$(1)/etc/asterisk_templates/*
-	sed -i \
-	-e '/echo_cancel/d' \
-	-e "/config.*tel_advanced.*TEL/a \        option 'echo_cancel' '1'" \
-	$(1)/etc/config/voice_client
-
-endif
+	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,voice-client))

voice-client/files/etc/asterisk_templates/acl.conf.TEMPLATE

@@ -1,80 +0,0 @@
-;
-; Named Access Control Lists (ACLs)
-;
-; A convenient way to share acl definitions
-;
-; This configuration file is read on startup
-;
-; CLI Commands
-; -----------------------------------------------------------
-;   acl show                         Show all named ACLs configured
-;   acl show <name>                  Show contents of a particular named ACL
-;   reload acl                       Reload configuration file
-;
-; Any configuration that uses ACLs which has been made to be able to use named
-; ACLs will specify a named ACL with the 'acl' option in its configuration in
-; a similar fashion to the usual 'permit' and 'deny' options. Example:
-; acl=my_named_acl
-;
-; Multiple named ACLs can be applied by either comma separating the arguments or
-; just by adding additional ACL lines. Example:
-; acl=my_named_acl
-; acl=my_named_acl2
-;
-; or
-;
-; acl=my_named_acl,my_named_acl2
-;
-; ACLs specified by name are evaluated independently from the ACL specified via
-; permit/deny. In order for an address to pass a given ACL, it must pass both
-; the ACL specified by permit/deny for a given item as well as any named ACLs
-; that were specified.
-;
-;[example_named_acl1]
-;deny=0.0.0.0/0.0.0.0
-;permit=209.16.236.0
-;permit=209.16.236.1
-;
-;[example_named_acl2]
-;permit=0.0.0.0/0.0.0.0
-;deny=10.24.20.171
-;deny=10.24.20.103
-;deny=209.16.236.1
-;
-; example_named_acl1 above shows an example of whitelisting. When whitelisting, the
-; named ACLs should follow a deny that blocks everything (like deny=0.0.0.0/0.0.0.0)
-; The following example explains how combining the ACLs works:
-; <in another configuration>
-; [example_item_with_acl]
-; acl=example_named_acl1
-; acl=example_named_acl2
-;
-; Suppose 209.16.236.0 tries to communicate and the ACL for that example is applied to it...
-; First, example_named_acl1 is evaluated. The address is allowed by that ACL.
-; Next, example_named_acl2 is evaluated. The address isn't blocked by example_named_acl2
-; either, so it passes.
-;
-; Suppose instead 209.16.236.1 tries to communicate and the same ACL is applied.
-; First, example_named_acl1 is evaluated and the address is allowed.
-; However, it is blocked by example_named_acl2, so the address is blocked from the combined
-; ACL.
-;
-; Similarly, the permits/denies in specific configurations that make up an ACL definition
-; are also treated as a separate ACL for evaluation. So if we change the example above to:
-; <in another configuration>
-; [example_item_with_acl]
-; acl=example_named_acl1
-; acl=example_named_acl2
-; deny=209.16.236.0
-;
-; Then 209.16.236.0 will be rejected by the non-named component of the combined ACL even
-; though it passes the two named components.
-;
-;
-; Named ACLs can use ipv6 addresses just like normal ACLs.
-;[ipv6_example_1]
-;deny = ::
-;permit = ::1/128
-;
-;[ipv6_example_2]
-;permit = fe80::21d:bad:fad:2323

voice-client/files/etc/asterisk_templates/brcm_line.TEMPLATE

@@ -6,7 +6,7 @@ autodial_timeoutmsec=|AUTODIAL_TIMEOUT|
 dialtone_timeoutmsec=|DIALTONE_TIMEOUT|
 context=|CONTEXT|
 context_direct=|CONTEXT|-direct
-dialtone_extension_hint_context=|LINE_NAME|_dialtone
+dialtone_extension_hint_context=brcm_dialtone
 dialtone_extension_hint=|DIALTONE_EXTENSION_HINT|
 callwaiting=|CALLWAITING|
 clir=|CLIR|