Ticket#460: Update get and operate command in uspd

Description:
 - First draft of the changes

Test Done:
 - Below ubus call tested
   ubus call usp get '{"path":"Device.WiFi.SSID.[BSSID==\"00:22:07:6D:5E:DD\"].SSID"}'
   ubus call usp get '{"path":"Device.IP.Interface.*.IPv4Address.*.IPAddress"}'
   ubus call usp get '{"path":"Device.WiFi.AccessPoint.[SSIDReference+BSSID==\"00:22:07:6D:5E:DD\"].SSID"}'
   ubus call usp set '{"path":"Device.WiFi.AccessPoint.[SSIDReference+BSSID==\"00:22:07:6D:5E:D\"].SSID", "value":"Test-2G"}'

Not Covered:
 - Operate command
 - Alias based addressing
 - Searching with List of References

dectmngr2/Makefile

@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.3.0
+PKG_VERSION:=1.2.0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=637aa9ef231f81d195f7a1b67c70af445ade7fee
+PKG_SOURCE_VERSION:=0c029ed2486342e7e7687631b702d5c743f3c41a
 PKG_NAME:=dectmngr2
 
 

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -1,7 +1,5 @@
 #!/bin/sh /etc/rc.common
 
-. /lib/functions/iopsys-repeated-macs.sh
-
 START=99
 USE_PROCD=1
 
@@ -91,31 +89,6 @@ create_rule() {
 	exec_log ebtables -t broute -A BROUTING ${cmd}
 }
 
-create_rules() {
-	protocol=$1; shift
-	macaddr=$1; shift
-	prio_num=$1; shift
-	port=$1
-
-	for p in $port; do
-		if [ "$protocol" == "none" ]; then
-			create_rule tcp $macaddr $prio_num $p
-			create_rule udp $macaddr $prio_num $p
-		else
-			create_rule $protocol $macaddr $prio_num $p
-		fi
-	done
-	# Create rule for all ports if port is not mentioned in uci
-	if [ -z "$port" ]; then
-		if [ "$protocol" == "none" ]; then
-			create_rule tcp $macaddr $prio_num
-			create_rule udp $macaddr $prio_num
-		else
-			create_rule $protocol $macaddr $prio_num
-		fi
-	fi
-}
-
 manage_rule() {
 	local cfg="$1"
 	local priority macaddr proto port comment prio_num protocol
@@ -127,15 +100,25 @@ manage_rule() {
 
 	protocol=$(echo ${proto}|tr [A-Z] [a-z])
 	prio_num=$(get_priority ${priority})
-	[ -n "${macaddr}" -a -n "${prio_num}" ] || return
-
-	create_rules ${protocol} ${macaddr} ${prio_num} ${port}
-	repeated_macs=$(mac_to_repeated ${macaddr})
-	for mac in $repeated_macs; do
-		[ "$mac" = "${macaddr}" ] && continue
-		create_rules ${protocol} $mac ${prio_num} ${port}
-	done
-
+	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
+		for p in ${port}; do
+			if [ "${protocol}" == "none" ]; then
+				create_rule tcp ${macaddr} ${prio_num} ${p}
+				create_rule udp ${macaddr} ${prio_num} ${p}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
+			fi
+		done
+		# Create rule for all ports if port is not mentioned in uci
+		if [ -z "${port}" ]; then
+			if [ "${protocol}" == "none" ]; then
+				create_rule tcp ${macaddr} ${prio_num}
+				create_rule udp ${macaddr} ${prio_num}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num}
+			fi
+		fi
+	fi
 }
 
 reload_service() {

easy-soc-libs/Makefile

@@ -11,7 +11,7 @@ PKG_RELEASE:=1
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f6deba973cba01d630fdc40c6e97c384b07e3df5
+PKG_SOURCE_VERSION:=6bd703870262eca9ccbd8c4937c41fe842828ae3
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz

endptmngr/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
 PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=bafc4f9e81de567965a0d8f2897d390cfb14636b
+PKG_SOURCE_VERSION:=44e2472e8c08bef01fab27e8e908d5672f7af136
 
 
 ifeq ($(CONFIG_ENDPT_OPEN),y)

gryphon-led-module/src/main.c

@@ -192,9 +192,9 @@ static int canyon_led_probe(struct platform_device *pdev)
 	sk9822_set_color_str(leds, "00FF00");
 	sk9822_update(leds);
 	msleep(200);
+#endif
 	sk9822_set_color_str(leds, "000000");
 	sk9822_update(leds);
-#endif
 
 	printk(KERN_INFO "canyon led successfully probed\n");
 

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-05-08
+PKG_VERSION:=4.0-2019-04-05
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=da50b98f5b0a9539edf97b3ffda4bf5a030dfa18
+PKG_SOURCE_VERSION:=f7e8cee5bcc578cc9bb9307e31d0c057676a377c
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -51,13 +51,6 @@ define Package/icwmp_xmpp
 	DEPENDS:=+libuci +libubox +libexpat +libstrophe
 endef
 
-define Package/icwmp_twamp
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 twamp feature
-	DEPENDS:=+libuci
-endef
-
 define Package/icwmp_udpechoserver
 	SECTION:=utils
 	CATEGORY:=Utilities
@@ -226,15 +219,6 @@ define Package/icwmp_udpechoserver/install
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
 endef
 
-define Package/icwmp_twamp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_twampd $(1)/usr/sbin/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_twampd $(1)/etc/init.d/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
-endef
-
 define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
@@ -271,5 +255,4 @@ $(eval $(call BuildPackage,libdatamodel))
 $(eval $(call BuildPackage,icwmp_stun))
 $(eval $(call BuildPackage,icwmp_xmpp))
 $(eval $(call BuildPackage,icwmp_udpechoserver))
-$(eval $(call BuildPackage,icwmp_twamp))
 $(eval $(call BuildPackage,icwmp-zstream))

icwmp/README

@@ -9,7 +9,7 @@
 	- libz.so
 	- libcrypto.so
 	the librairies should be present in the "staging_dir/target-i386_uClibc-0.9.30.1/usr/lib/"  or "staging_dir/toolchain-mips_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib"
-
+	
 	header files and folders:
 	- expat.h
 	- expat_external.h
@@ -33,7 +33,7 @@ this software is composed of 3 packages:
 - cwmp kernel package: contains cwmp kernel module. This module could be used by other kernel modules to notify the icwmpd daemon  when kernel parameter changes
 
 The three packages should be selected in the make menu config in order to get the three packages compiled.
-To compile the three packages: $ make package/cwmpd/compile
+To compile the three packages: $ make package/cwmpd/compile 
 
 3) OpenWRT settings
 in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script file:
@@ -49,7 +49,7 @@ in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script
 	- libopenssl package should be installed
 	- libz package should be installed
 	- libcrypto package should be installed
-
+    
     Configure the acs url in the /etc/config/icwmp
     and then start the cwmpd service: /etc/init.d/icwmpd start
     for the help: /etc/init.d/icwmpd

iop/config

@@ -44,6 +44,7 @@ CONFIG_PACKAGE_juci-minidlna=y
 CONFIG_PACKAGE_juci-mod-status=y
 CONFIG_PACKAGE_juci-mod-system=y
 CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-natalie-dect=y
 CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-device=y
 CONFIG_PACKAGE_juci-network-dsl=y

iop/scripts/genconfig.sh

@@ -171,8 +171,8 @@ function genconfig {
 		echo -e "  -a|--list-all\t\tList all Customers and their board types"
 		echo -e "  -b|--boards\t\tList all board types"
 		echo
-		echo "Example ./iop genconfig dg200 TELIA"
-		echo "(if no customerconfig is chosen, iopsys config will be used)"
+		echo "Example ./iop genconfig vg50 TELIA"
+		echo "(if no customerconfig is chosen the Inteno Config will be used)"
 		echo
 		exit 0
 	}
@@ -439,7 +439,7 @@ function genconfig {
 			shift;
 		done
 
-		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
+		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
 
 		setup_dirs
 		create_and_copy_files "$@"

iopupgrade/files/sbin/iopu

@@ -21,6 +21,7 @@ upd_ubi_id=""		# num,	UBI volume number for the volume name
 run_cleanup=0		# if set the cleanup should be run otherwise we skip it.
 run_mount_cleanup=0	# set if we should run umount in cleanup
 upd_kernel=0		# set to 1 if system has the kernel in own mtd partition
+upd_cfe=0		# set to 1 if system is using cfe as bootloader.
 log_stdout=1		# set to 0 to prevent the log to also print to stdout
 upd_noreboot=0		# set to 1 if we should not reboot after programming
 upd_forceimage=0	# set this to force upgrade even if image is for wrong board.

netmode/files/etc/netmodes/bridged/wireless

@@ -47,10 +47,10 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps_pushbutton '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl0'
 
 config wifi-device 'wl1'
@@ -87,9 +87,9 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps_pushbutton '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl1'
 

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -27,7 +27,7 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	ra0
-	option wps_pushbutton	1
+	option wps_pbc	1
 
 config wifi-device  rai0
 	option band a
@@ -46,7 +46,7 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	rai0
-	option wps_pushbutton	1
+	option wps_pbc	1
 
 config wifi-iface
 	option device   rai0

netmode/files/etc/netmodes/routed_brcm/wireless

@@ -47,10 +47,10 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps_pushbutton '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl0'
 
 config wifi-device 'wl1'
@@ -87,9 +87,9 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps_pushbutton '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl1'
 

netmode/files/etc/netmodes/routed_mtk/wireless

@@ -27,7 +27,7 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps_pushbutton	1
+	option wps_pbc	1
 	option ifname	ra0
 
 config wifi-device  rai0
@@ -47,6 +47,6 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps_pushbutton	1
+	option wps_pbc	1
 	option ifname	rai0
 

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=769430115b6dd984313574c3fa2a6d99c65cd223
+PKG_SOURCE_VERSION:=c1598f9dc8f2d67fbfcfd831052f40b3cde3d19c
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
 

uboot/Makefile

@@ -14,7 +14,7 @@ PKG_SOURCE_PROTO:=git
 
 ifdef CONFIG_TARGET_intel_mips
 PKG_SOURCE_URL:=git@dev.iopsys.eu:intel/uboot.git
-PKG_SOURCE_VERSION:=15e223e20e5680bc446e84b4d8b5bce06b45fb1b
+PKG_SOURCE_VERSION:=0ef53f269c27f8e736fd30fd1a874159f70c76bf
 else
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/uboot.git
 PKG_SOURCE_VERSION:=3ef2ba866a99205496e0ce01935c89a1778d9b85
@@ -74,7 +74,7 @@ define uboot/grx500_norrland
   TITLE:=U-Boot for Norrland Board
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=11
+  PKG_RELEASE:=10
 endef
 
 UBOOTS := \

usp/Makefile

@@ -8,7 +8,7 @@ PKG_NAME:=uspd
 PKG_VERSION:=1.0.0
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a5fba2890d05e868605431dacd32ffda4bdc232d
+PKG_SOURCE_VERSION:=64f39a5041da3d6c0a45cbc901dea3bd062d96fe
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 
@@ -19,7 +19,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/uspd
   SECTION:=utils
   CATEGORY:=Utilities
-  TITLE:=USP ubus backend
+  TITLE:=TR069 extention for USP
   DEPENDS:=+libubox +ubus +icwmp-curl
 endef
 

voice-client/files/etc/asterisk_templates/extensions_macro.conf.TEMPLATE

@@ -130,7 +130,7 @@ exten => s,1,			Goto(s-${DIALSTATUS},1)
 exten => s,n,			Hangup()
 
 ;handle busy (with CBBS support)
-exten => s-BUSY,1,		Read(DIGIT,Busy,1,i,30)
+exten => s-BUSY,1,		Read(DIGIT,Busy,1,in,30)
 exten => s-BUSY,n,		GotoIf($["${DIGIT}" = "${ARG8}"]?ccbs)
 exten => s-BUSY,n,		Hangup()
 exten => s-BUSY,n(ccbs),	Set(result=${SHELL(/usr/lib/asterisk/cbbs.sh ${ARG1} ${ARG2} ${ARG3} ${ARG4} ${ARG5} ${ARG6} ${ARG7})})

voice-client/files/etc/uci-defaults/99-voice_client

@@ -5,7 +5,6 @@
 # Adapt to config section name changes
 grep -q brcm_line /etc/config/voice_client && sed -i 's/brcm_line/tel_line/g' /etc/config/voice_client
 grep -q brcm_advanced /etc/config/voice_client && sed -i 's/brcm_advanced/tel_advanced/g' /etc/config/voice_client
-grep -q BRCM /etc/config/voice_client && sed -i 's/BRCM/TEL/g' /etc/config/voice_client
 
 # Add call filter section
 uci -q get voice_client.call_filter0 >/dev/null || {
@@ -71,9 +70,9 @@ EOT
 # If dtmfmode is set to the obsolete compatability change to auto
 sed -i 's/dtmfmode\s*=\s*compatibility/dtmfmode=auto/' /etc/asterisk/sip.conf
 
-if [ "$(uci get voice_client.SIP.dtmfmode)" == "compatibility" ]; then
-	uci set voice_client.SIP.dtmfmode="auto"
-	uci commit voice_client
+if [ $(uci get voice_client.SIP.dtmfmode) == 'compatibility' ]; then
+    uci set voice_client.SIP.dtmfmode='auto'
+    uci commit
 fi
 
 exit 0

wifilife/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wifilife
-PKG_VERSION:=1.0.3
+PKG_VERSION:=1.0.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=837631d44eafa3827a1c1c1603540658744f4a9a
+PKG_SOURCE_VERSION:=de6183cda406fbd1a98779bda2ea1b2ffb8f2e04
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 ifeq ($(CONFIG_WIFILIFE_OPEN),y)

wifilife/files/wifilife.init

@@ -9,8 +9,6 @@ EXTRA_COMMANDS="enable_check"
 
 
 start_service() {
-	[ "$(uci -q get wifilife.@wifilife[0].enabled)" == "0" ] && return
-
 	procd_open_instance
 	procd_set_param command ${PROG} -d -l -f -o /tmp/wifiagent.log
 	procd_set_param respawn

wifimngr/Makefile

@@ -8,7 +8,7 @@ PKG_NAME:=wifimngr
 PKG_VERSION:=1.0.2
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=659602bc62a244d5b53e452b7ee10ff846f03d01
+PKG_SOURCE_VERSION:=66a7e957f5e3e83ab60da68f7fb05cdda7f474d5
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>