Ticket#460: Update get and operate command in uspd

Description:
 - First draft of the changes

Test Done:
 - Below ubus call tested
   ubus call usp get '{"path":"Device.WiFi.SSID.[BSSID==\"00:22:07:6D:5E:DD\"].SSID"}'
   ubus call usp get '{"path":"Device.IP.Interface.*.IPv4Address.*.IPAddress"}'
   ubus call usp get '{"path":"Device.WiFi.AccessPoint.[SSIDReference+BSSID==\"00:22:07:6D:5E:DD\"].SSID"}'
   ubus call usp set '{"path":"Device.WiFi.AccessPoint.[SSIDReference+BSSID==\"00:22:07:6D:5E:D\"].SSID", "value":"Test-2G"}'

Not Covered:
 - Operate command
 - Alias based addressing
 - Searching with List of References

ated/Makefile

@@ -1,15 +1,8 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+# Copyright (C) 2016 inteno
 #
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
@@ -27,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

bashdb/Makefile

@@ -13,9 +13,6 @@ PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)

bbf/Config_bbfdm.in

@@ -1,27 +0,0 @@
-if PACKAGE_libbbfdm
-
-config LIBBBFDM_VENDOR_PREFIX
-    string "Vendor Prefix"
-    default "X_IOPSYS_EU_"
-
-config BBF_TR181
-	bool "Compile with tr181 device features"
-	default y
-
-config BBF_TR104
-	bool "Compile with tr104 voice features"
-	default y
-
-config BBF_TR143
-	bool "Compile with tr143 diagnostics features"
-	default y
-
-config BBF_TR157
-	bool "Compile with tr157 bulkdata collector features"
-	default y
-	
-config BBF_TR064
-	bool "Compile with tr064 features"
-	default n
-
-endif

bbf/Makefile

@@ -1,96 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libbbfdm
-PKG_VERSION:=1.0-2019-12-28
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=87df7048821fb8a6dcd35f0959f97aa08688f53b
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=LGPL-2.1
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libbbfdm
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbfdm/description
- Test description will update later.
-endef
-
-USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
-ifneq ($(USE_LOCAL),)
-define Build/Prepare
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBBBFDM_VENDOR_PREFIX)\\\"
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE -D_AADJ
-
-ifeq ($(CONFIG_BBF_TR181),y)
-CONFIGURE_ARGS += \
-	--enable-tr181
-endif
-
-ifeq ($(CONFIG_BBF_TR104),y)
-CONFIGURE_ARGS += \
-	--enable-tr104
-endif
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CONFIGURE_ARGS += \
-	--enable-tr143
-endif
-
-ifeq ($(CONFIG_BBF_TR157),y)
-CONFIGURE_ARGS += \
-	--enable-tr157
-endif
-
-ifeq ($(CONFIG_BBF_TR064),y)
-CONFIGURE_ARGS += \
-	--enable-tr064
-endif
-
-define Package/libbbfdm/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/bbfdm
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(CP) $(PKG_BUILD_DIR)/dmtree/tr181/*.h $(1)/usr/include/libbbfdm/
-	$(CP) $(PKG_BUILD_DIR)/dmtree/tr157/*.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libbbfdm))

bbfdetest/Makefile

@@ -1,39 +0,0 @@
-#
-# Copyright (C) 2020 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbfdetest
-PKG_VERSION:=1.0.0
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bbfdetest
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Library for example shared libraries
-  DEPENDS:=+libubox +ubus +libbbf_api
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
-
-define Build/Prepare
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Package/bbfdetest/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdetest.init $(1)/etc/init.d/bbfdetest
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdetest $(1)/usr/sbin/bbfdetest
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
-endef
-
-$(eval $(call BuildPackage,bbfdetest))
-

bbfdetest/src/Makefile

@@ -1,25 +0,0 @@
-PROG = bbfdetest
-LIB = libbbfdetest.so
-
-PROG_OBJS = bbfdetest.o
-LIB_OBJS = libbbfdetest.o
-
-PROG_CFLAGS = $(CFLAGS) -fstrict-aliasing
-PROG_LDFLAGS = $(LDFLAGS) -lubus -lubox
-LIB_LDFLAGS = $(LDFLAGS) -lbbf_api
-
-.PHONY: all
-
-%.o: %.c
-	$(CC) $(PROG_CFLAGS) $(FPIC) -c -o $@ $<
-
-all: $(PROG) $(LIB)
-
-$(PROG): $(PROG_OBJS)
-	$(CC) $(PROG_LDFLAGS) -o $@ $^
-
-$(LIB): $(LIB_OBJS)
-	$(CC) $(PROG_CFLAGS) $(LIB_LDFLAGS) -shared -o $@ $^
-
-clean:
-	rm -f *.o $(PROG) $(LIB)

bbfdetest/src/bbfdetest.c

@@ -1,185 +0,0 @@
-/*
- * Copyright (C) 2020 iopsys Software Solutions AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 2.1
- * as published by the Free Software Foundation
- *
- *	Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
- */
- 
-#include <stdio.h>
-#include <unistd.h>
-#include <libubox/blobmsg.h>
-#include <libubox/uloop.h>
-#include <libubus.h>
-
-typedef struct SupportedDataModel
-{
-	char url[128];
-	char urn[128];
-	char features[128];
-} Supported_DataModel;
-
-struct SupportedDataModel DataModel[] = {
-{"http://www.broadband-forum.org/cwmp/tr-181-2-13-0.xml","urn:broadband-forum-org:tr-181-2-13-0","Router,Wireless,Firewall,NAT,IPv4,IPv6"},
-{"http://www.broadband-forum.org/cwmp/tr-104-1-1-0.xml","urn:broadband-forum-org:tr-104-1-1-0", "VoiceService"},
-{"http://www.broadband-forum.org/cwmp/tr-143-1-1-0.xml","urn:broadband-forum-org:tr-143-1-1-0", "Ping,TraceRoute,Download,Upload,UDPecho,ServerSelectionDiag"},
-{"http://www.broadband-forum.org/cwmp/tr-157-1-3-0.xml","urn:broadband-forum-org:tr-157-1-3-0", "Bulkdata,SoftwareModules"},
-};
-
-void remove_new_line(char *buf)
-{
-	int len;
-	len = strlen(buf) - 1;
-	if (buf[len] == '\n')
-		buf[len] = 0;
-}
-
-static int device_info(struct ubus_context *ctx, struct ubus_object *obj,
-					   struct ubus_request_data *req, const char *method,
-					   struct blob_attr *msg)
-{
-	void *a, *t;
-	struct blob_buf bb;
-	char line[256];
-	char *p;
-
-	memset(&bb,0,sizeof(struct blob_buf));
-	blob_buf_init(&bb, 0);
-
-	FILE* fs = fopen( "/proc/cpuinfo" , "r");
-	if (fs) {
-		a = blobmsg_open_array(&bb, "processor");
-		while (fgets(line, 256, fs)) {
-			remove_new_line(line);
-			strtok_r(line, ":", &p);
-			if (strcasestr(line, "processor")) {
-				t = blobmsg_open_table(&bb, "");
-				blobmsg_add_u32(&bb, "number", atoi(p+1));
-			}
-			if (strcasestr(line, "model")) {
-				blobmsg_add_string(&bb, "model", p+1);
-				blobmsg_close_table(&bb, t);
-			}
-		}
-		fclose(fs);
-		blobmsg_close_array(&bb, a);
-	}
-
-	a = blobmsg_open_array(&bb, "dataModel");
-	for (int i = 0; i < sizeof(DataModel)/sizeof(struct SupportedDataModel); i++) {
-		t = blobmsg_open_table(&bb, "");
-		blobmsg_add_string(&bb, "url", DataModel[i].url);
-		blobmsg_add_string(&bb, "urn", DataModel[i].urn);
-		blobmsg_add_string(&bb, "features", DataModel[i].features);
-		blobmsg_close_table(&bb, t);
-	}
-	blobmsg_close_array(&bb, a);
-
-	ubus_send_reply(ctx, req, bb.head);
-	blob_buf_free(&bb);
-	return 0;
-}
-
-enum {
-	PING_HOST,
-	__PING_MAX
-};
-
-static const struct blobmsg_policy ping_policy[__PING_MAX] = {
-	[PING_HOST]     = { .name = "host",     .type = BLOBMSG_TYPE_STRING },
-};
-
-static int device_ping(struct ubus_context *ctx, struct ubus_object *obj,
-						struct ubus_request_data *req, const char *method,
-						struct blob_attr *msg)
-{
-	struct blob_attr *tb[__PING_MAX] = {NULL};
-	char *p, *min, *avg, *max, line[512], command[512];
-	struct blob_buf bb;
-	FILE *log;
-	int host_ping = 0;
-
-	if(blobmsg_parse(ping_policy, __PING_MAX, tb, blob_data(msg), blob_len(msg)))
-		return UBUS_STATUS_UNKNOWN_ERROR;
-
-	if (!tb[PING_HOST])
-		return UBUS_STATUS_INVALID_ARGUMENT;
-
-	snprintf(command, sizeof(command), "ping -c 1 -W 1 %s", blobmsg_get_string(tb[PING_HOST]));
-
-	memset(&bb,0,sizeof(struct blob_buf));
-	blob_buf_init(&bb, 0);
-
-	if ((log = popen(command, "r"))) {
-		while (fgets(line, sizeof(line), log) != NULL) {
-			if (strstr(line, "round-trip")) {
-				host_ping = 1;
-				blobmsg_add_u8(&bb,"status", true);
-				strtok_r(line, "=", &min);
-				strtok_r(min+1, "/", &avg);
-				blobmsg_add_string(&bb, "min", min+1);
-				strtok_r(avg, "/", &max);
-				blobmsg_add_string(&bb, "avg", avg);
-				strtok_r(max, " ", &p);
-				blobmsg_add_string(&bb, "max", max);
-				break;
-			}
-		}
-		pclose(log);
-	}
-
-	if (!host_ping)
-		blobmsg_add_u8(&bb,"status", false);
-
-	ubus_send_reply(ctx, req, bb.head);
-	blob_buf_free(&bb);
-	return 0;
-}
-
-static struct ubus_method device_object_methods[] = {
-	UBUS_METHOD_NOARG("info", device_info),
-	UBUS_METHOD("ping", device_ping, ping_policy),
-};
-
-static struct ubus_object_type device_object_type = UBUS_OBJECT_TYPE("device", device_object_methods);
-
-static struct ubus_object device_object = {
-	.name = "device",
-	.type = &device_object_type,
-	.methods = device_object_methods,
-	.n_methods = ARRAY_SIZE(device_object_methods),
-};
-
-static void device_init(struct ubus_context *ctx)
-{
-	int ret;
-
-	ret = ubus_add_object(ctx, &device_object);
-	if (ret)
-		fprintf(stderr, "Failed to publish '%s' object : %s\n", device_object.name, ubus_strerror(ret));
-
-	uloop_run();
-}
-
-int main(void)
-{
-	const char *ubus_socket = NULL;
-	struct ubus_context *ctx = NULL;
-
-	uloop_init();
-	ctx = ubus_connect(ubus_socket);
-	if (!ctx) {
-		fprintf(stderr, "Failed to connect to ubus\n");
-		return -1;
-	}
-	ubus_add_uloop(ctx);
-	device_init(ctx);
-	uloop_run();
-	ubus_free(ctx);
-	if (ctx) ubus_free(ctx);
-	uloop_done();
-
-	return 0;
-}

bbfdetest/src/bbfdetest.init

@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=94
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/bbfdetest
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}

bbfdetest/src/libbbfdetest.c

@@ -1,292 +0,0 @@
-/*
- * Copyright (C) 2020 iopsys Software Solutions AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 2.1
- * as published by the Free Software Foundation
- *
- *	Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
- */
-
-#include <libbbf_api/dmbbf.h>
-#include <libbbf_api/dmcommon.h>
-#include <libbbf_api/dmuci.h>
-#include <libbbf_api/dmubus.h>
-#include <libbbf_api/dmjson.h>
-#include "libbbfdetest.h"
-
-/* ********** RootDynamicObj ********** */
-LIB_MAP_OBJ tRootDynamicObj[] = {
-/* parentobj, nextobject */
-{"Device.IP.Diagnostics.", tdynamicIPDiagnosticsObj},
-{"Device.DeviceInfo.", tdynamicDeviceInfobj},
-{"Device.", tdynamicDeviceObj},
-{0}
-};
-
-/* ********** RootDynamicOperate ********** */
-LIB_MAP_OPERATE tRootDynamicOperate[] = {
-/* pathname, operation */
-{"Device.X_IOPSYS_EU_PingTEST.Run", dynamicDevicePingOperate},
-{"Device.X_IOPSYS_EU_Reboot", dynamicDeviceRebootOperate},
-{0}
-};
-
-/* *** Device.IP.Diagnostics. *** */
-DMOBJ tdynamicIPDiagnosticsObj[] = {
-/* OBJ, permission, addobj, delobj, checkobj, browseinstobj, forced_inform, notification, nextjsonobj, nextobj, leaf, linker, bbfdm_type*/
-{"X_IOPSYS_EU_PingTest", &DMREAD, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, tdynamicIPDiagnosticsX_IOPSYS_EU_PingTestParams, NULL, BBFDM_BOTH},
-{0}
-};
-
-/* *** Device.IP.Diagnostics.X_IOPSYS_EU_PingTest. *** */
-DMLEAF tdynamicIPDiagnosticsX_IOPSYS_EU_PingTestParams[] = {
-/* PARAM, permission, type, getvalue, setvalue, forced_inform, notification, bbfdm_type*/
-{"DiagnosticsState", &DMWRITE, DMT_STRING, getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState, setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState, NULL, NULL, BBFDM_BOTH},
-{"Host", &DMWRITE, DMT_STRING, getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host, setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host, NULL, NULL, BBFDM_BOTH},
-{"MinimumResponseTime", &DMREAD, DMT_STRING, getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MinimumResponseTime, NULL, NULL, NULL, BBFDM_BOTH},
-{"AverageResponseTime", &DMREAD, DMT_STRING, getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_AverageResponseTime, NULL, NULL, NULL, BBFDM_BOTH},
-{"MaximumResponseTime", &DMREAD, DMT_STRING, getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MaximumResponseTime, NULL, NULL, NULL, BBFDM_BOTH},
-{0}
-};
-
-/* *** Device.DeviceInfo. *** */
-DMOBJ tdynamicDeviceInfobj[] = {
-/* OBJ, permission, addobj, delobj, checkobj, browseinstobj, forced_inform, notification, nextjsonobj, nextobj, leaf, linker, bbfdm_type*/
-{"SupportedDataModel", &DMREAD, NULL, NULL, NULL, browseDeviceInfoSupportedDataModelInst, NULL, NULL, NULL, NULL, tdynamicDeviceInfoSupportedDataModelTestParams, NULL, BBFDM_CWMP},
-{0}
-};
-
-/* *** Device.DeviceInfo.SupportedDataModel.{i}. *** */
-DMLEAF tdynamicDeviceInfoSupportedDataModelTestParams[] = {
-/* PARAM, permission, type, getvalue, setvalue, forced_inform, notification, bbfdm_type*/
-{"URL", &DMREAD, DMT_STRING, getdynamic_DeviceInfoSupportedDataModel_URL, NULL, NULL, NULL, BBFDM_CWMP},
-{"URN", &DMREAD, DMT_STRING, getdynamic_DeviceInfoSupportedDataModel_URN, NULL, NULL, NULL, BBFDM_CWMP},
-{"Features", &DMREAD, DMT_STRING, getdynamic_DeviceInfoSupportedDataModel_Features, NULL, NULL, NULL, BBFDM_CWMP},
-{0}
-};
-
-/* *** Device. *** */
-DMOBJ tdynamicDeviceObj[] = {
-/* OBJ, permission, addobj, delobj, checkobj, browseinstobj, forced_inform, notification, nextjsonobj, nextobj, leaf, linker, bbfdm_type*/
-{"X_IOPSYS_EU_Processor", &DMREAD, NULL, NULL, NULL, browseDeviceX_IOPSYS_EU_ProcessorInst, NULL, NULL, NULL, NULL, tdynamicDeviceX_IOPSYS_EU_ProcessorParams, NULL, BBFDM_BOTH},
-{0}
-};
-
-/* *** Device.X_IOPSYS_EU_Processor.{i}. *** */
-DMLEAF tdynamicDeviceX_IOPSYS_EU_ProcessorParams[] = {
-/* PARAM, permission, type, getvalue, setvalue, forced_inform, notification, bbfdm_type*/
-{"Architecture", &DMREAD, DMT_STRING, getdynamic_DeviceX_IOPSYS_EU_Processor_Architecture, NULL, NULL, NULL, BBFDM_BOTH},
-{0}
-};
-
-
-/*************************************************************
- * ENTRY METHOD
-/*************************************************************/
-int browseDeviceInfoSupportedDataModelInst(struct dmctx *dmctx, DMNODE *parent_node, void *prev_data, char *prev_instance)
-{
-	json_object *res = NULL, *datamodel_obj = NULL, *arrobj = NULL;
-	char *idx, *idx_last = NULL;
-	int id = 0, j = 0;
-
-	dmubus_call("device", "info", UBUS_ARGS{}, 0, &res);
-	if (res) {
-		dmjson_foreach_obj_in_array(res, arrobj, datamodel_obj, j, 1, "dataModel") {
-			idx = handle_update_instance(1, dmctx, &idx_last, update_instance_without_section, 1, ++id);
-			if (DM_LINK_INST_OBJ(dmctx, parent_node, (void *)datamodel_obj, idx) == DM_STOP)
-				break;
-		}
-	}
-	return 0;
-}
-
-int browseDeviceX_IOPSYS_EU_ProcessorInst(struct dmctx *dmctx, DMNODE *parent_node, void *prev_data, char *prev_instance)
-{
-	json_object *res = NULL, *processor_obj = NULL, *arrobj = NULL;
-	char *idx, *idx_last = NULL;
-	int id = 0, j = 0;
-
-	dmubus_call("device", "info", UBUS_ARGS{}, 0, &res);
-	if (res) {
-		dmjson_foreach_obj_in_array(res, arrobj, processor_obj, j, 1, "processor") {
-			idx = handle_update_instance(1, dmctx, &idx_last, update_instance_without_section, 1, ++id);
-			if (DM_LINK_INST_OBJ(dmctx, parent_node, (void *)processor_obj, idx) == DM_STOP)
-				break;
-		}
-	}
-	return 0;
-}
-
-/*************************************************************
- * GET & SET PARAM
-/*************************************************************/
-static int execute_pingtest()
-{
-	json_object *res;
-	char *host, *min, *avg, *max;
-
-	dmuci_get_varstate_string("cwmp", "@pingtest[0]", "Host", &host);
-	if(host && host[0] == '\0')
-		return 0;
-
-	dmubus_call("device", "ping", UBUS_ARGS{{"host", host, String}}, 1, &res);
-	if (res) {
-		dmuci_set_varstate_value("cwmp", "@pingtest[0]", "DiagnosticState", "Complete");
-		min=dmjson_get_value(res, 1, "min");
-		if(min!=NULL && strlen(min)>0)
-			dmuci_set_varstate_value("cwmp", "@pingtest[0]", "Minimum", min);
-		avg=dmjson_get_value(res, 1, "avg");
-		if(avg!=NULL && strlen(avg)>0)
-			dmuci_set_varstate_value("cwmp", "@pingtest[0]", "Average", avg);
-		max=dmjson_get_value(res, 1, "max");
-		if(max!=NULL && strlen(max)>0)
-			dmuci_set_varstate_value("cwmp", "@pingtest[0]", "Maximum", max);
-	}
-	return 0;
-}
-
-static inline char *pingtest_get(char *option, char *def)
-{
-	char *tmp;
-	dmuci_get_varstate_string("cwmp", "@pingtest[0]", option, &tmp);
-	if(tmp && tmp[0] == '\0')
-		return dmstrdup(def);
-	else
-		return tmp;
-}
-
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = pingtest_get("DiagnosticState", "None");
-	return 0;
-}
-
-int setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	char *tmp;
-	struct uci_section *curr_section = NULL;
-
-	switch (action)	{
-		case VALUECHECK:
-			break;
-		case VALUESET:
-			if (strcmp(value, "Requested") == 0) {
-				curr_section = dmuci_walk_state_section("cwmp", "pingtest", NULL, NULL, CMP_SECTION, NULL, NULL, GET_FIRST_SECTION);
-				if(!curr_section)
-				{
-					dmuci_add_state_section("cwmp", "pingtest", &curr_section, &tmp);
-				}
-				dmuci_set_varstate_value("cwmp", "@pingtest[0]", "DiagnosticState", value);
-				execute_pingtest();
-			}
-			break;
-	}
-	return 0;
-}
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = pingtest_get("Host", "");
-	return 0;
-}
-
-int setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	char *tmp;
-	struct uci_section *curr_section = NULL;
-
-	switch (action)	{
-		case VALUECHECK:
-			break;
-		case VALUESET:
-			curr_section = dmuci_walk_state_section("cwmp", "pingtest", NULL, NULL, CMP_SECTION, NULL, NULL, GET_FIRST_SECTION);
-			if(!curr_section)
-			{
-				dmuci_add_state_section("cwmp", "pingtest", &curr_section, &tmp);
-			}
-			dmuci_set_varstate_value("cwmp", "@pingtest[0]", "Host", value);
-			break;
-	}
-	return 0;
-}
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MinimumResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = pingtest_get("Minimum", "0");
-	return 0;
-}
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_AverageResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = pingtest_get("Average", "0");
-	return 0;
-}
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MaximumResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = pingtest_get("Maximum", "0");
-	return 0;
-}
-
-int getdynamic_DeviceInfoSupportedDataModel_URL(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = dmjson_get_value((json_object *)data, 1, "url");
-	return 0;
-}
-
-int getdynamic_DeviceInfoSupportedDataModel_URN(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = dmjson_get_value((json_object *)data, 1, "urn");
-	return 0;
-}
-
-int getdynamic_DeviceInfoSupportedDataModel_Features(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = dmjson_get_value((json_object *)data, 1, "features");
-	return 0;
-}
-
-int getdynamic_DeviceX_IOPSYS_EU_Processor_Architecture(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = dmjson_get_value((json_object *)data, 1, "model");
-	if (strcasestr(*value, "arm"))
-		*value = "arm";
-	else if(strcasestr(*value,"mips"))
-		*value = "mips";
-	return 0;
-}
-
-/*************************************************************
- * OPERATE
-/*************************************************************/
-opr_ret_t dynamicDevicePingOperate(struct dmctx *dmctx, char *path, char *input)
-{
-	json_object *ubus_res = NULL, *json_res = NULL;
-
-	json_res = json_tokener_parse((const char *)input);
-	char *host = dmjson_get_value(json_res, 1, "host");
-	if(host[0] == '\0')
-		return UBUS_INVALID_ARGUMENTS;
-
-	dmubus_call("device", "ping", UBUS_ARGS{{"host", host, String}}, 1, &ubus_res);
-	if (ubus_res) {
-		char *param_min = dmjson_get_value(ubus_res, 1, "min");
-		char *param_avg = dmjson_get_value(ubus_res, 1, "avg");
-		char *param_max = dmjson_get_value(ubus_res, 1, "max");
-
-		add_list_paramameter(dmctx, dmstrdup("MinimumResponseTime"), param_min, "string", NULL, 0);
-		add_list_paramameter(dmctx, dmstrdup("AverageResponseTime"), param_avg, "string", NULL, 0);
-		add_list_paramameter(dmctx, dmstrdup("MaximumResponseTime"), param_max, "string", NULL, 0);
-	}
-	return SUCCESS;
-}
-
-opr_ret_t dynamicDeviceRebootOperate(struct dmctx *dmctx, char *path, char *input)
-{
-	if(0 == dmubus_call_set("system", "reboot", UBUS_ARGS{}, 0))
-		return SUCCESS;
-	else
-		return FAIL;
-}

bbfdetest/src/libbbfdetest.h

@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2020 iopsys Software Solutions AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 2.1
- * as published by the Free Software Foundation
- *
- *	Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
- */
-
-#ifndef __LIBBBFDETEST_H
-#define __LIBBBFDETEST_H
-
-DMOBJ tdynamicIPDiagnosticsObj[];
-DMLEAF tdynamicIPDiagnosticsX_IOPSYS_EU_PingTestParams[];
-DMOBJ tdynamicDeviceInfobj[];
-DMLEAF tdynamicDeviceInfoSupportedDataModelTestParams[];
-DMOBJ tdynamicDeviceObj[];
-DMLEAF tdynamicDeviceX_IOPSYS_EU_ProcessorParams[];
-
-int browseDeviceInfoSupportedDataModelInst(struct dmctx *dmctx, DMNODE *parent_node, void *prev_data, char *prev_instance);
-int browseDeviceX_IOPSYS_EU_ProcessorInst(struct dmctx *dmctx, DMNODE *parent_node, void *prev_data, char *prev_instance);
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action);
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action);
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MinimumResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_AverageResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MaximumResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_DeviceInfoSupportedDataModel_URL(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_DeviceInfoSupportedDataModel_URN(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_DeviceInfoSupportedDataModel_Features(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_DeviceX_IOPSYS_EU_Processor_Architecture(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-
-opr_ret_t dynamicDevicePingOperate(struct dmctx *dmctx, char *path, char *input);
-opr_ret_t dynamicDeviceRebootOperate(struct dmctx *dmctx, char *path, char *input);
-
-#endif //__LIBBBFDETEST_H
-

bbk_cli/Makefile

@@ -1,42 +0,0 @@
-#
-# Copright (C) 2018 The Internet Foundation In Sweden
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbk_cli
-PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bbk_cli
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +libstdcpp
-	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
-endef
-
-define Package/bbk_cli/description
-	To measure connection speed in an environment that is missing a web browser, 
-	for example, in a server, you can use our command line interface bbk_cli, 
-	which is available for some of the most common operating systems.
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
-endef
-
-define Package/bbk_cli/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
-endef
-
-$(eval $(call BuildPackage,bbk_cli))

bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch

@@ -1,25 +0,0 @@
-diff --git a/src/framework/engine.h b/src/framework/engine.h
-index 57a48ad..9e1bc36 100644
---- a/src/framework/engine.h
-+++ b/src/framework/engine.h
-@@ -10,6 +10,7 @@
- #include <map>
- #include <vector>
- #include <string>
-+#include <sys/select.h>
- 
- #include "logger.h"
- 
-diff --git a/src/framework/mk.inc b/src/framework/mk.inc
-index 793e211..13275be 100644
---- a/src/framework/mk.inc
-+++ b/src/framework/mk.inc
-@@ -7,7 +7,7 @@ OS:=$(shell uname)
- CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
- 
- ifeq ($(OS),Linux)
--CXX = g++
-+CXX = $(CROSS_COMPILE)g++
- endif
- 
- ifeq ($(OS),Darwin)

bootchart2/Makefile

@@ -18,9 +18,6 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/bootchart2

catv/Makefile

@@ -1,19 +1,9 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/catv

crashlog/Makefile

@@ -1,18 +1,9 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=crashlog
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
 
 include $(INCLUDE_DIR)/package.mk
 

crashlog/files/etc/init.d/crashlog

@@ -6,13 +6,14 @@ send_log()
 {
 	nr=$(db get hw.board.serialNumber)
 	hw=$(db get hw.board.hardware)
-	fam=$(db get hw.board.iopVerFam)
+	hwv=$(db get hw.board.hardwareVersion)
+	bid=$(db get hw.board.boardId)
 	sw=$(db get hw.board.iopVersion)
 	server=$(/sbin/uci get system.crashlog.server)
 
 	while true
 	do
-	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${bid}_${hwv}_${hw}_${sw}_${nr}
 	    if [ $? == 0 ]
 	    then
 	       break;

crashlog/files/sbin/logcore

@@ -52,9 +52,10 @@ cat >/dev/null
 
 nr=$(db get hw.board.serialNumber)
 hw=$(db get hw.board.hardware)
-fam=$(hw.board.iopVerFam)
+hwv=$(db get hw.board.hardwareVersion)
+bid=$(db get hw.board.boardId)
 sw=$(db get hw.board.iopVersion)
 
-scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${bid}_${hwv}_${hw}_${sw}_${nr}
 rm $TMP_CORE
 

dectmngr2/Makefile

@@ -1,20 +1,19 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
+
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.3.0
+PKG_VERSION:=1.2.0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=2c8990fd5275d469e8ab6c7a99e17fe0a56052ea
+PKG_SOURCE_VERSION:=0c029ed2486342e7e7687631b702d5c743f3c41a
 PKG_NAME:=dectmngr2
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
 
 RSTRIP:=true
 export BUILD_DIR
@@ -30,7 +29,7 @@ define Package/dectmngr2
   CATEGORY:=Utilities
   TITLE:=Dectmngr2
   URL:=
-  DEPENDS:= +natalie-dect-h @+PACKAGE_bcmkernel:bcmkernel @+PACKAGE_bcmopen:bcmopen @(PACKAGE_bcmkernel||PACKAGE_bcmopen) +libubox +ubus +libpicoevent endptmngr
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus +libpicoevent
 endef
 
 define Package/dectmngr2/description

dslmngr/Makefile

@@ -13,15 +13,12 @@ PKG_VERSION:=1.0.0
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7522faab4142fe2c0ac8cbf71bb0cc5bd49f0750
+PKG_SOURCE_VERSION:=be5b0d0c0a1c2abd335aaf19f01f63284d8cc285
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -45,7 +42,7 @@ define Package/dslmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +easy-soc-libs
 endef
 
 define Package/dslmngr/description

easy-qos/Makefile

@@ -1,29 +1,19 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-qos
-PKG_VERSION:=1.1
+PKG_VERSION:=1.0
 PKG_RELEASE:=0
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_brcm63xx_mips)
 endef
 
 define Package/easy-qos/description
-	This package contains Easy QoS utility
+	This package contains Easy QoS utitie
 endef
 
 define Build/Prepare
@@ -39,11 +29,7 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
-else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -1,301 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-RULE_LIST="/tmp/easy_qos_rule.list"
-CLIENT_LIST="/tmp/easy_qos_class_client.list"
-BRIDGE_INTF=""
-
-[ -f /etc/profile.d/intel.sh ] && {
-	. /etc/profile.d/intel.sh
-	sh /etc/profile.d/intel.sh
-}
-
-log() {
-	echo "${@}"|logger -t easy_qos_class -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-exec_class_log() {
-	${@} |grep -i successful
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-		return 1
-	fi
-	return 0
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 8;;
-		"low")
-			echo 7;;
-		"besteffort")
-			echo 6;;
-		"normal")
-			echo 5;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 3;;
-		"high")
-			echo 2;;
-		"highest")
-			echo 1;;
-	esac
-}
-
-get_mark() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo "0x41/0x3df";;
-		"low")
-			echo "0x82/0x3df";;
-		"besteffort")
-			echo "0xc3/0x3df";;
-		"normal")
-			echo "0x104/0x3df";;
-		"video")
-			echo "0x145/0x3df";;
-		"medium")
-			echo "0x186/0x3df";;
-		"high")
-			echo "0x1c7/0x3df";;
-		"highest")
-			echo "0x208/0x3df";;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_ip_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j EXTMARK --set-mark ${mark}";
-	if [ "${proto}" != "icmp" ]; then
-		if [ -n "${ports}" ]; then
-			cmd="--match multiport --dports ${ports} ${cmd}";
-		fi
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd}
-}
-
-is_lan_bridge() {
-	local _section=$1
-	local _type
-	local _is_lan
-
-	config_get _type "$section" "type"
-	config_get _is_lan "$section" "is_lan"
-
-	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
-		BRIDGE_INTF="br-${_section}"
-	fi
-}
-
-get_bridge_interface() {
-	config_load network
-	config_foreach is_lan_bridge interface
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	# execute the delete rules written onto a file then delete the file
-	[ -f ${RULE_LIST} ] || return 0
-
-	while read line
-	do
-		log "Deleting old classification rules"
-		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
-	done <${RULE_LIST}
-
-	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
-	done
-	sync
-
-	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
-}
-
-# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
-create_rule() {
-	local proto=$1; shift
-	local mac_addr=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-	# Rule name is uniqe, so we take hash of all the input as rule_name
-	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
-
-	cmd="-j mark --mark ${mark}";
-
-	if [ "${mac_addr}" != "none" ]; then
-		cmd="--smac ${mac_addr} ${cmd}";
-	fi
-
-	if [ "${proto}" != "icmp" ]; then
-		if [ "${ports}" != "none" ]; then
-			IFS=","
-			for port in ${ports};
-			do
-				cmd="--dport ${port}:${port} ${cmd}";
-			done
-			IFS=' '
-		fi
-	fi
-	if [ "${proto}" != "none" ]; then
-		cmd="-p ${proto} $cmd"
-	fi
-	cmd="-i ${BRIDGE_INTF} $cmd"
-	cmd="-A ${rule_name} $cmd"
-
-	# Store the rule_names for cleanup on reload
-	exec_class_log classcfg ${cmd}
-	[ $? -eq 0 ] && \
-		echo ${rule_name}  >> ${RULE_LIST}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num port_list ip ipmark
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-	ipmark=$(get_mark ${priority})
-	ip=$(get_ipaddress ${macaddr})
-
-	if [ -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${macaddr} ${prio_num} ${port_list}
-			create_rule udp ${macaddr} ${prio_num} ${port_list}
-			if [ -n "${ip}" ]; then
-				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
-				create_ip_rule udp ${ip} ${ipmark} ${port_list}
-			fi
-		else
-			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
-			if [ -n "${ip}" ]; then
-				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	get_bridge_interface
-	map_client_entries
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
-	reload_service
-	log "Easy QoS class installed"
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos" "network"
-}
-

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -102,7 +102,7 @@ manage_rule() {
 	prio_num=$(get_priority ${priority})
 	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
 		for p in ${port}; do
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+			if [ "${protocol}" == "none" ]; then
 				create_rule tcp ${macaddr} ${prio_num} ${p}
 				create_rule udp ${macaddr} ${prio_num} ${p}
 			else
@@ -111,7 +111,7 @@ manage_rule() {
 		done
 		# Create rule for all ports if port is not mentioned in uci
 		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+			if [ "${protocol}" == "none" ]; then
 				create_rule tcp ${macaddr} ${prio_num}
 				create_rule udp ${macaddr} ${prio_num}
 			else

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -85,7 +85,7 @@ get_ipaddress() {
 	json_get_keys keys
 
 	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
+	json_select "${1//:/_}"
 	json_get_var ip ip
 
 	echo "$ip"
@@ -103,18 +103,18 @@ validate_rule_section()
 
 # Clear existing rules before applying new rules
 clear_existing_rules() {
-	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	local rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
 	while [ -n "${rule}" ]; do
 		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+		rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
 	done
 }
 
 check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	iptables -t mangle -C OUTPUT ${@} 2>/dev/null
 	# Create rule if not exists
 	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
+		exec_log iptables -t mangle -A OUTPUT ${@}
 	else
 		log "Rule exists for ${@}"
 	fi
@@ -158,7 +158,7 @@ manage_rule() {
 	port_list=$(echo ${port}|sed 's/ /,/g')
 
 	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+		if [ "${proto}" == "none" ]; then
 			create_rule tcp ${ip} ${prio_num} ${port_list}
 			create_rule udp ${ip} ${prio_num} ${port_list}
 		else

easy-soc-libs/Makefile

@@ -1,29 +1,24 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
+# Copyright (C) 2018 Iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=2.5.0
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=6bf3911521b6c9072c20798c59390280afd0f16f
+PKG_SOURCE_VERSION:=6bd703870262eca9ccbd8c4937c41fe842828ae3
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/easy-soc-libs
@@ -42,7 +37,7 @@ endef
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route
+  DEPENDS+=+TARGET_intel_mips:libnl +TARGET_intel_mips:libnl-route
 endef
 
 define Package/libethernet
@@ -82,7 +77,7 @@ endif
 define Package/libdsl
   $(call Package/easy-soc-libs)
   TITLE:= XDSL library (libdsl)
-  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi +TARGET_intel_mips:kmod-ppa-drv
+  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi
 endef
 
 subdirs := \
@@ -112,7 +107,7 @@ define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
 endef
 
 define Build/InstallDev/libdsl
@@ -142,7 +137,7 @@ endef
 
 define Package/libwifi/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
 endef
 
 define Package/libethernet/install
@@ -162,4 +157,3 @@ endef
 $(eval $(call BuildPackage,libwifi))
 $(eval $(call BuildPackage,libdsl))
 $(eval $(call BuildPackage,libethernet))
-

endptmngr/Makefile

@@ -1,23 +1,22 @@
 #
-# Copyright (C) 2018 IOPSYS Software Solutions AB
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
+
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
 PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=ef49d57c3824df4dfb4921d39461e2bd14f918a7
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
+PKG_SOURCE_VERSION:=44e2472e8c08bef01fab27e8e908d5672f7af136
+
 
 ifeq ($(CONFIG_ENDPT_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://download.iopsys.eu/iopsys/opensdk/
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_NAME:=endptmngr-open
-PATCH_DIR:=
 else
 PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/endptmngr
 PKG_SOURCE_PROTO:=git
@@ -29,7 +28,6 @@ RSTRIP:=true
 export BUILD_DIR
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_PARALLEL:=1
 
 
 
@@ -43,7 +41,7 @@ define Package/endptmngr
   CATEGORY:=Utilities
   TITLE:=Brcmslic
   URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent @+PACKAGE_bcmkernel:bcmkernel @+PACKAGE_bcmopen:bcmopen @(PACKAGE_bcmkernel||PACKAGE_bcmopen) @TARGET_HAS_VOICE
+  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
 endef
 
 define Package/endptmngr/description

fatrace/Makefile

@@ -1,7 +1,7 @@
 #
 # Copyright (C) 2006-2010 OpenWrt.org
 #
-# This is free software, licensed under the GNU General Public License v3.
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPL-3.0
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

gigaset-elements/.gitignore

@@ -0,0 +1,3 @@
+
+git-src
+

gigaset-elements/Makefile

@@ -0,0 +1,65 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=gigaset-elements
+
+PKG_VERSION:=2.4.2
+# PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_GIGASET_ELEMENTS_SRC_URL ?= git@dev.iopsys.eu:3rdparty/gigaset-elements.git
+PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
+
+PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
+
+
+PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+######################################################
+
+define Package/gigaset-elements
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libjson-c +libcurl +libpthread
+  TITLE:=Gigaset elements
+endef
+
+######################################################
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) all
+endef
+
+
+
+define Package/gigaset-elements/install
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
+endef
+
+
+
+define Package/gigaset-elements/preinst
+#!/bin/sh
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
+endef
+
+
+define Package/gigaset-elements/postrm
+#!/bin/sh
+rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
+rm -rf /usr/share/gigaset
+endef
+
+
+######################################################
+
+$(eval $(call BuildPackage,gigaset-elements))
+

gryphon-led-module/Makefile

@@ -28,7 +28,7 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  PKG_LICENSE:=GPLv2
+  PKG_LICENSE:=Genexis
   PKG_LICENSE_URL:=
 endef
 

gryphon-led-module/src/main.c

@@ -192,9 +192,9 @@ static int canyon_led_probe(struct platform_device *pdev)
 	sk9822_set_color_str(leds, "00FF00");
 	sk9822_update(leds);
 	msleep(200);
+#endif
 	sk9822_set_color_str(leds, "000000");
 	sk9822_update(leds);
-#endif
 
 	printk(KERN_INFO "canyon led successfully probed\n");
 

ice-client/Config.in

@@ -0,0 +1,4 @@
+
+config ICE_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

ice-client/files/ice-client.uci_default

@@ -0,0 +1,74 @@
+#!/bin/sh
+
+grep -rq "^ice:" /etc/passwd || {
+	adduser -D -H -s /bin/false ice
+}
+
+uci -q delete passwords.ice
+uci -q set passwords.ice=usertype
+uci -q set passwords.ice.password="\$WPAKEY"
+uci -q del_list passwords.ice._access_w=root
+uci -q add_list passwords.ice._access_w=root
+uci -q del_list passwords.ice._access_r=root
+uci -q add_list passwords.ice._access_r=root
+uci -q commit passwords
+
+uci show rpcd | grep username=.*ice.* >/dev/null || {
+cat >> /etc/config/rpcd << EOF
+
+config login
+	option username 'ice'
+	option password '\$p\$ice'
+	list _access_w 'none'
+	list write 'user-user'
+	list write 'juci-broadcom-dsl'
+	list write 'juci-broadcom-dsl-admin'
+	list write 'juci-broadcom-ethernet'
+	list write 'juci-broadcom-iptv'
+	list write 'juci-broadcom-vlan'
+	list write 'juci-broadcom-vlan-admin'
+	list write 'juci-wireless'
+	list write 'juci-wireless-admin'
+	list write 'juci-catv'
+	list write 'juci-ddns'
+	list write 'juci-diagnostics'
+	list write 'juci-dnsmasq-dhcp'
+	list write 'juci-dropbear'
+	list write 'juci-ethernet'
+	list write 'juci-event'
+	list write 'juci-firewall-fw3'
+	list write 'juci-iconnect'
+	list write 'juci-igmpinfo'
+	list write 'juci-inteno-backup'
+	list write 'juci-inteno-multiwan'
+	list write 'juci-inteno-provisioning'
+	list write 'juci-inteno-qos'
+	list write 'juci-inteno-voice-client'
+	list write 'juci-minidlna'
+	list write 'juci-mod-status'
+	list write 'juci-mod-system'
+	list write 'juci-natalie-dect'
+	list write 'juci-netmode'
+	list write 'juci-network-netifd'
+	list write 'juci-owsd'
+	list write 'juci-printer'
+	list write 'juci-realtime-graphs'
+	list write 'juci-samba'
+	list write 'juci-sfp'
+	list write 'juci-snmpd'
+	list write 'juci-sysupgrade'
+	list write 'juci-uhttpd'
+	list write 'juci-upnp'
+	list write 'juci-usb'
+	list write 'core'
+	list write 'unauthenticated'
+
+EOF
+}
+
+uci -q del_list dhcp.@domain[0].name="inteno.lan"
+uci -q add_list dhcp.@domain[0].name="inteno.lan"
+uci -q commit dhcp
+
+exit 0
+

icgroupd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2016 Inteno Broadband AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.

icwmp/Config_cwmp.in

@@ -19,9 +19,17 @@ config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y
 
+config XMPP_ENABLE
+	bool "enable xmpp feature"
+	default n
+
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
+
+config LIBDATAMODEL_VENDOR_PREFIX
+    string "Vendor Prefix"
+    default "X_IOPSYS_EU_"
     
 endif
 

icwmp/Config_datamodel.in

@@ -0,0 +1,7 @@
+if PACKAGE_libdatamodel
+
+config UPNP_TR064
+	bool "Compile with tr064 features"
+	default n
+
+endif

icwmp/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2012 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,17 +8,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-12-28
+PKG_VERSION:=4.0-2019-04-05
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b3c9b384ccf9d48a9b4dac953586f5230cfd6fc2
+PKG_SOURCE_VERSION:=f7e8cee5bcc578cc9bb9307e31d0c057676a377c
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
 
 PKG_CONFIG_DEPENDS:= \
 	CONFIG_CWMP_ACS_MULTI \
@@ -32,53 +30,39 @@ CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
 
+define Package/libdatamodel
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
+endef
+
 define Package/icwmp_stun
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR-069 stun Client
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 stun Client
+	DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json
 endef
 
 define Package/icwmp_xmpp
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR-069 xmpp feature
-  DEPENDS:=+libuci +libubox +libexpat +libstrophe
-endef
-
-define Package/icwmp_twamp
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR-069 twamp feature
-  DEPENDS:=+libuci
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 xmpp feature
+	DEPENDS:=+libuci +libubox +libexpat +libstrophe
 endef
 
 define Package/icwmp_udpechoserver
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR-069 udpechoserver feature
-  DEPENDS:=+libuci
-endef
-
-define Package/icwmp_bulkdata
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR-069 BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm
-endef
-
-define Package/icwmp-tr098
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=CWMP client for TR-098 Data Model
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl +libtr098
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 udpechoserver feature
+	DEPENDS:=+libuci
 endef
 
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libbbfdm
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace +libdatamodel
 endef
 
 define Package/icwmp/description
@@ -103,6 +87,10 @@ define Package/icwmp-zstream/config
 	source "$(SOURCE)/Config_cwmp.in"
 endef
 
+define Package/libdatamodel/config
+	source "$(SOURCE)/Config_datamodel.in"
+endef
+
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
 define Build/Prepare
@@ -110,14 +98,15 @@ define Build/Prepare
 endef
 endif
 
+ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+TARGET_CFLAGS += -DEX400
+endif
+
+TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBDATAMODEL_VENDOR_PREFIX)\\\"
+
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
 
-ifeq ($(CONFIG_PACKAGE_icwmp-tr098),y)
-CONFIGURE_ARGS += \
-	--enable-icwmp_tr098
-endif
-
 ifneq ($(CWMP_REVISION)_,_)
 ifneq ($(CWMP_REVISION),exported)
 ifneq ($(CWMP_REVISION),Unversioned directory)
@@ -135,6 +124,16 @@ CONFIGURE_ARGS += \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
 	
+ifeq ($(CONFIG_UPNP_TR064),y)
+CONFIGURE_ARGS += \
+	--enable-upnptr064
+endif
+	
+ifeq ($(CONFIG_XMPP_ENABLE),y)
+CONFIGURE_ARGS += \
+	--enable-xmpp
+endif
+	
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \
@@ -166,17 +165,23 @@ CONFIGURE_ARGS += \
 	--enable-devel
 endif
 
+define Package/libdatamodel/install
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib/
+endef
+
 define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/* $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
 ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(INSTALL_DIR) $(1)/usr/share/icwmp
 	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
@@ -187,11 +192,6 @@ endif
 	$(CP) ./files/* $(1)/
 endef
 
-define Package/icwmp-tr098/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/bin/icwmp_tr098d $(1)/usr/sbin
-endef
-
 define Package/icwmp_stun/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_stund $(1)/usr/sbin/icwmp_stund
@@ -208,7 +208,6 @@ define Package/icwmp_xmpp/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
-	$(CP) ./xmpp-files/* $(1)/
 endef
 
 define Package/icwmp_udpechoserver/install
@@ -220,23 +219,16 @@ define Package/icwmp_udpechoserver/install
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
 endef
 
-define Package/icwmp_twamp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_twampd $(1)/usr/sbin/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_twampd $(1)/etc/init.d/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
+	$(CP) $(PKG_BUILD_DIR)/dm/*.h $(1)/usr/include/libdatamodel
+	$(CP) $(PKG_BUILD_DIR)/dm/dmtree/common/root.h $(1)/usr/include/libdatamodel
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.a $(1)/lib
 endef
 
-define Package/icwmp_bulkdata/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_bulkdatad $(1)/usr/sbin/icwmp_bulkdatad
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_bulkdatad $(1)/etc/init.d/icwmp_bulkdatad
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_bulkdata $(1)/etc/config
-endef
 
 define Package/icwmp-$(BUILD_VARIANT)/postinst
 	#!/bin/sh
@@ -257,11 +249,10 @@ define Package/icwmp-$(BUILD_VARIANT)/prerm
 	exit 0
 endef
 
+
 $(eval $(call BuildPackage,icwmp-curl))
+$(eval $(call BuildPackage,libdatamodel))
 $(eval $(call BuildPackage,icwmp_stun))
 $(eval $(call BuildPackage,icwmp_xmpp))
 $(eval $(call BuildPackage,icwmp_udpechoserver))
-$(eval $(call BuildPackage,icwmp_twamp))
-$(eval $(call BuildPackage,icwmp_bulkdata))
-$(eval $(call BuildPackage,icwmp-tr098))
-#$(eval $(call BuildPackage,icwmp-zstream))
+$(eval $(call BuildPackage,icwmp-zstream))

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -41,14 +41,4 @@ set_cwmp_reqopts() {
 	fi
 }
 
-regenerate_ssl_link(){
-	local cert_dir="/etc/ssl/certs"
-	local all_file=$(ls $cert_dir/*.pem)
-	for cfile in $all_file
-	do
-		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
-	done
-}
-
 set_cwmp_reqopts
-regenerate_ssl_link

icwmp/xmpp-files/etc/hotplug.d/iface/91-icwmp_xmpp

@@ -1,21 +0,0 @@
-#!/bin/sh
-
-[ -f /etc/config/cwmp_xmpp ] || exit 0
-
-[ "$ACTION" == "ifup" ] || exit 0
-[ "$INTERFACE" == "loopback" ] && exit 0
-
-local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-local islan="$(uci -q get network.$INTERFACE.is_lan)"
-[ "$islan" == "1" ] && exit 0
-
-local proto="$(uci -q get network.$INTERFACE.proto)"
-[ "$proto" == "none" ] && exit 0
-
-local ifname="$(uci -q get network.$INTERFACE.ifname)"
-[ "${ifname:0:1}" == "@" ] && exit 0
-
-/etc/init.d/icwmp_xmppd reload &
-

ieee1905/Makefile

@@ -1,55 +0,0 @@
-#
-# Copyright (C) 2019 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ieee1905
-PKG_VERSION:=1.1.4
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5f3cdad5c0ee41464b5699565e0175611dc9d070
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ieee1905
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=IEEE1905 handler
-  DEPENDS:= +ubox +libpicoevent +libpcap +libopenssl +libuci +libjson-c
-endef
-
-define Package/ieee1905/description
- IEEE1905 stack with extended functionalities.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE \
-	-DSEND_EMPTY_TLVS \
-	-DFIX_BROKEN_TLVS \
-	-DSPEED_UP_DISCOVERY \
-	-DREGISTER_MULTIAP_FEATURE \
-	-DDO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS
-	#-DREGISTER_EXTENSION_BBF
-
-#define Build/Prepare
-#        $(CP) -rf ./ieee1905/* $(PKG_BUILD_DIR)/
-#endef
-
-define Package/ieee1905/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_BIN) ./files/etc/init.d/ieee1905 $(1)/etc/init.d/ieee1905
-	$(INSTALL_DATA) ./files/etc/config/ieee1905 $(1)/etc/config/ieee1905
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ieee1905d $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libs/*.so $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,ieee1905))

ieee1905/files/etc/config/ieee1905

@@ -1,43 +0,0 @@
-config ieee1905
-        option enabled '1'
-        option debug  true
-
-config meshcomms 'global'
-        option enabled '1'
-        option basemacint 'wan'
-        option mapall true
-#        option registrar 'wl0'
-        option debug_level  2
-        option port  8888
-        option cmdu_event false
-        option discovery_timer 300
-
-#config al-iface
-#        option enabled '1'
-#        option ifname 'br-lan'
-#        option media '802_3U'
-#        option manufacturer_name 'Broadcom'
-#        option model_name 'Eth EG400'
-#        option model_number '00002'
-#        option device_name 'EG400R1'
-#        option serial_number '1234'
-
-#config al-iface
-#        option enabled '1'
-#        option ifname 'wl0'
-#        option media '802_11N5'
-#        option manufacturer_name 'Broadcom'
-#        option model_name 'WIFI EG400'
-#        option model_number '00001'
-#        option device_name 'EG400R1'
-#        option serial_number '1235'
-
-#config al-iface
-#        option enabled '1'
-#        option ifname 'wl1'
-#        option media '802_11N2'
-#        option manufacturer_name 'Broadcom'
-#        option model_name 'WIFI EG400'
-#        option model_number '00001'
-#        option device_name 'EG400R1'
-#        option serial_number '1236'

ieee1905/files/etc/init.d/ieee1905

@@ -1,211 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/ieee1905d
-MESH_CONF=/tmp/meshcomms.config
-INTERFACE=""
-
-validate_global_section()
-{
-	uci_validate_section ieee1905 meshcomms "${1}" \
-		'enabled:bool:false' \
-		'basemacint:string:wan' \
-		'almac:string' \
-		'registrar:string' \
-		'mapall:bool:true' \
-		'debug_level:uinteger:5' \
-		'port:port:8888' \
-		'cmdu_event:bool:true' \
-		'discovery_timer:uinteger:60'
-}
-
-validate_ieee1905_section()
-{
-	uci_validate_section ieee1905 ieee1905 "${1}" \
-		'debug:bool:true' \
-		'enabled:bool:true'
-}
-
-get_device_name() {
-	local device
-	# Get wan L3 interface
-	ubus list |grep -iq network.interface.${1}
-	if [ "$?" -eq 0 ]; then
-		json_load "$(ubus -t 2 call network.interface.${1} status)"
-		json_get_var device device
-		echo ${device}
-	fi
-}
-
-get_interface_mac() {
-	local l3 basemac
-	l3=$(get_device_name ${1})
-	if [ -n ${l3} ]; then
-		json_load "$(ubus -t 2 call network.device status "{\"name\":\"${l3}\"}")"
-		json_get_var basemac macaddr
-	fi
-	local first=0x$(echo $basemac |cut -d : -f 1)
-	local rest=$(echo $basemac |cut -d : -f 2-)
-	# Set local bit
-	first=$((first|2))
-	first=$(printf "%02x" $first)
-	basemac="${first}:${rest}"
-	echo ${basemac}
-}
-
-validate_al_section()
-{
-	uci_validate_section ieee1905 al-iface "${1}" \
-		'enabled:bool:false' \
-		'ifname:string' \
-		'media:string:eth' \
-		'manufacturer_name:string:iopsys' \
-		'model_name:string' \
-		'model_number:string' \
-		'device_name:string' \
-		'serial_number:string'
-}
-
-configure_interface()
-{
-	local ifname media enabled manufacturer_name model_name model_number device_name serial_number
-	validate_al_section ${1} || {
-		echo "Validation of global section failed"
-		return 1;
-	}
-
-	if [ ${enabled} -eq 0 ]; then
-		return;
-	fi
-
-	if [ -z ${INTERFACE} ]; then
-		INTERFACE=${ifname}
-	else
-		INTERFACE="${INTERFACE},${ifname}"
-	fi
-
-	local uuid=$(cat /proc/sys/kernel/random/uuid)
-	local ifindex=$(cat /sys/class/net/${ifname}/upper_*/ifindex 2>/dev/null)
-	if [ -z ${ifindex} ]; then
-		ifindex=$(cat /sys/class/net/${ifname}/ifindex)
-	fi
-
-	echo "Interface ${ifname} ifindex |${ifindex}|" >>/dev/console
-
-	json_add_object
-	json_add_string ifname ${ifname}
-	json_add_string media ${media}
-	json_add_string manufacturer_name ${manufacturer_name}
-	json_add_string model_name ${model_name}
-	json_add_string model_number ${model_number}
-	json_add_string device_name ${device_name}
-	json_add_string serial_number ${serial_number}
-	json_add_string uuid ${uuid}
-	json_add_int ifindex ${ifindex}
-	json_close_object
-}
-
-configure_meshcomms()
-{
-	local enabled almac basemacint mapall debug_level port l3device basemac intf registrar cmdu_event discovery_timer
-
-	validate_global_section global || {
-		echo "Validation of global section failed"
-		return 1;
-	}
-
-	if [ -z ${almac} ]; then
-		basemac=$(get_interface_mac ${basemacint})
-	else
-		basemac=${almac}
-	fi
-
-
-	local fname cname model cUrl
-	fname=$(db get hw.board.boardId)
-	cname=$(db get hw.board.iopVerCustomer)
-	model=$(db get hw.board.routerModel)
-	cUrl="http://192.168.1.1"
-
-	json_init
-	# fill the al-iface info
-	json_add_array al-iface
-	config_foreach configure_interface al-iface
-	json_close_array
-	json_add_object deviceInfo
-	json_add_string friendly_name ${fname}
-	json_add_string manufacturer_name ${cname}
-	json_add_string model ${model}
-	json_add_string control_url ${cUrl}
-	json_close_object
-	json_add_object meshcomms
-	json_add_int enabled ${enabled}
-	json_add_string mac ${basemac}
-	json_add_string interfaces ${INTERFACE}
-	json_add_int map ${mapall}
-	json_add_string registrar ${registrar}
-	json_add_int debug_level ${debug_level}
-	json_add_int port ${port}
-	json_add_int cmdu_event ${cmdu_event}
-	json_add_int discovery_timer ${discovery_timer}
-	json_close_object
-
-	json_dump >${MESH_CONF}
-
-}
-
-configure_ieee1905()
-{
-	local enabled debug
-
-	validate_ieee1905_section ${1} || {
-		echo "Validation of ieee1905 section failed"
-		exit 1;
-	}
-
-	if [ ${debug} -eq 1 ]; then
-		# Forward stdout of the command to logd
-		procd_set_param stdout 1
-		# Same for stderr
-		procd_set_param stderr 1
-	fi
-
-	if [ ${enabled} -ne 1 ]; then
-		exit 0;
-	fi
-}
-
-configure_network() {
-	[ -f ${MESH_CONF} ] && rm ${MESH_CONF}
-
-	ebtables -L FORWARD|grep -iqE "1:80:C2:(0)+:(0)+:13.*-j.*DROP"
-	if [ "$?" -ne 0 ]; then
-		echo "Applying drop rule to drop pkts forwared by kernel to 1905.1 multicast mac"
-		ebtables -A FORWARD -d 01:80:c2:00:00:13 -j DROP
-	fi
-
-	config_load ieee1905
-	config_foreach configure_ieee1905 ieee1905
-	config_foreach configure_meshcomms meshcomms
-}
-
-start_service() {
-	procd_open_instance ieee1905
-	procd_set_param command ${PROG}
-	configure_network
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger "network"
-	procd_add_reload_trigger "netmode"
-}

ifbt/Makefile

@@ -6,9 +6,9 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ifbt
-PKG_VERSION:=0.2
+PKG_VERSION:=0.1
 
-PKG_SOURCE_VERSION:=6a279efa5046ace0681a1d0e79592a120f80e171
+PKG_SOURCE_VERSION:=0286812ed8036dea758f904694dc416481fba64d
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
 
@@ -16,9 +16,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=README
-
 include $(INCLUDE_DIR)/package.mk
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)

ifsi/Makefile

@@ -0,0 +1,39 @@
+#
+# Copyright (C) 2015 Inteno
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ifsi
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+define Package/ifsi
+  CATEGORY:=Utilities
+  DEPENDS:=+ubus +libubox
+  TITLE:=Inteno Functional Script Interface
+endef
+
+define Package/ifsi/description
+	Inteno Functional Script Interface
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+define Package/ifsi/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifsi $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ifsi))

ifsi/src/Makefile

@@ -0,0 +1,17 @@
+CC		= gcc
+CFLAGS		= -g -Wall
+LOCLIBS		= 
+LIBS		= -lubus -lubox -lblobmsg_json
+OBJS		= ifsi.o
+SRCS		= ifsi.c
+LIBSRCS		= 
+ISRCS		= 
+
+all: ifsi
+
+ifsi: ${OBJS}
+	${CC} ${LDFLAGS} ${LIBSRCS} -o ifsi ${OBJS} ${LIBS}
+
+clean:
+	rm -f ifsi *.o
+

ifsi/src/ifsi.c

@@ -0,0 +1,74 @@
+/*
+ * ifsi -- Inteno functional script interface
+ *
+ * Copyright (C) 2012-2013 Inteno Broadband Technology AB. All rights reserved.
+ *
+ * Author: dev@inteno.se
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <unistd.h>
+
+#include <libubox/blobmsg.h>
+#include <libubox/blobmsg_json.h>
+#include <libubox/uloop.h>
+
+#include <libubus.h>
+
+static struct ubus_context *ctx;
+static struct ubus_event_handler event_listener;
+static struct blob_buf b;
+
+
+static void receive_event(struct ubus_context *ctx, struct ubus_event_handler *ev,
+			  const char *type, struct blob_attr *msg)
+{
+	char *str;
+	uint32_t id;
+
+	str = blobmsg_format_json(msg, true);
+	fprintf(stdout, "I got %s event %s\n", type, str);
+	free(str);
+}
+
+int main(int argc, char **argv)
+{
+	const char *ubus_socket = NULL;
+	int ret;
+
+	uloop_init();
+
+	ctx = ubus_connect(ubus_socket);
+	if (!ctx) {
+		fprintf(stderr, "Failed to connect to ubus\n");
+		return 1;
+	}
+
+	ubus_add_uloop(ctx);
+
+	event_listener.cb = receive_event;
+	ret = ubus_register_event_handler(ctx, &event_listener, "*");
+	if (ret)
+		fprintf(stderr, "Couldn't register to router events\n");
+
+	uloop_run();
+
+	ubus_free(ctx);
+	uloop_done();
+
+	return 0;
+}
+

imonitor/Makefile

@@ -18,9 +18,6 @@ PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
 

inbd/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=53ca7f58edb87976b5897ccaf487bb0cbbf39d07
+PKG_SOURCE_VERSION:=665a72a6bb2b5ea5a17ad6248957fe35525b3782
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 

inotify-tools/Makefile

@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=inotify-tools
+PKG_VERSION:=3.14
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=1df9af4d6cd0f4af4b1b19254bcf056aed4ae395
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/rvoicilas/inotify-tools.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/inotify-tools
+	CATEGORY:=Utilities
+	TITLE:=Tools to trace filesystem events.
+	URL:=
+endef
+
+define Package/inotify-tools/description
+	Tools to trace filesystem events.
+endef
+
+define Package/inotify-tools/install
+	$(INSTALL_DIR) $(1)/usr
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(CP) ./files/* $(1)/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0.4.1 $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0 $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywait $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywatch $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,inotify-tools))

inotify-tools/files/usr/bin/iop_write_monitor

@@ -0,0 +1,13 @@
+#! /bin/sh
+
+# is the real root mounted ?
+if [ ! -f /tmp/inotify_real_root/etc/preinit ]
+then
+	ubivol=$( cat /proc/cmdline  | sed -e "s/.*root=\(ubi:rootfs_.\).*/\1/" )
+	mkdir /tmp/inotify_real_root
+	mount -t ubifs $ubivol /tmp/inotify_real_root
+fi
+
+inotifywait -r -m -e modify -e create -e attrib -e delete -e move /tmp/inotify_real_root
+
+

iop/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys
+# Copyright (C) 2006-2011 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,7 +10,6 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=iop
 PKG_VERSION:=1.0
 PKG_RELEASE:=0
-PKG_LICENSE:=GPLv2
 
 include $(INCLUDE_DIR)/package.mk
 

iop/config

@@ -14,7 +14,6 @@ CONFIG_PACKAGE_comgt-ncm=y
 CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_easy-qos=y
 CONFIG_PACKAGE_gdb=m
 CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_glib2=y
@@ -37,7 +36,6 @@ CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
 CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
 CONFIG_PACKAGE_juci-dropbear=y
-CONFIG_PACKAGE_juci-easyqos=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
 CONFIG_PACKAGE_juci-icwmp=y
@@ -46,6 +44,7 @@ CONFIG_PACKAGE_juci-minidlna=y
 CONFIG_PACKAGE_juci-mod-status=y
 CONFIG_PACKAGE_juci-mod-system=y
 CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-natalie-dect=y
 CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-device=y
 CONFIG_PACKAGE_juci-network-dsl=y
@@ -80,7 +79,6 @@ CONFIG_PACKAGE_ndisc6=y
 CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
-CONFIG_PACKAGE_obuspa=y
 CONFIG_PACKAGE_odhcp6c=y
 CONFIG_PACKAGE_odhcpd=y
 CONFIG_PACKAGE_openssl-util=y
@@ -117,7 +115,6 @@ CONFIG_PACKAGE_umbim=y
 CONFIG_PACKAGE_uqmi=y
 CONFIG_PACKAGE_usb-modeswitch=y
 CONFIG_PACKAGE_usbreset=y
-CONFIG_PACKAGE_uspd=y
 CONFIG_PACKAGE_wget=y
 CONFIG_PACKAGE_wwan=y
 CONFIG_PACKAGE_libwifi=y
@@ -183,10 +180,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
 # CONFIG_BUSYBOX_CONFIG_NTPD is not set
-CONFIG_BUSYBOX_CONFIG_MOUNTPOINT=y
-CONFIG_BUSYBOX_CONFIG_RUN_PARTS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_RUN_PARTS_FANCY=y
 CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
@@ -196,10 +189,5 @@ CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 CONFIG_KERNEL_DEVTMPFS=y
 CONFIG_KERNEL_DEVTMPFS_MOUNT=y
 # CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_LOCALMIRROR="http://download.iopsys.eu/iopsys/mirror/"
+LOCAL_MIRROR="http://download.iopsys.eu/iopsys/mirror/"
 
-# Generation of /etc/banner.
-CONFIG_IMAGEOPT=y
-CONFIG_VERSIONOPT=y
-CONFIG_VERSION_MANUFACTURER="iopsysWrt"
-CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"

iop/scripts/extract_core.sh

@@ -6,9 +6,13 @@ function extract_core {
 	topdir=$(pwd)
 
 	# Paths to packages that should be exported.
+	paths+='package/network/services/dnsmasq '
 	paths+='package/network/config/firewall '
 	paths+='package/network/config/netifd '
+	paths+='package/network/config/qos-scripts '
 	paths+='package/utils/busybox '
+	paths+='package/base-files '
+	paths+='package/system/procd '
 	paths+='package/system/rpcd '
 	paths+='package/network/services/openvpn '
 
@@ -20,13 +24,7 @@ function extract_core {
 		echo ""
 		echo "Example: $0 extract_core"
 		echo "  -p package/utils/busybox"
-		echo "  -r feeds/openwrt_core"
-		echo "  -b devel"
-		echo ""
-		echo "Extract all default packages:"
-		echo "$0 extract_core"
-		echo "  -p default"
-		echo "  -r feeds/openwrt_core"
+		echo "  -r feeds/lede_core"
 		echo "  -b devel"
 	}
 

iop/scripts/feeds_update.sh

@@ -28,7 +28,7 @@ function feeds_update {
 
     # replace core packages with iopsys versions
     if [ $override == 1 ]; then
-		./scripts/feeds install -f -p openwrt_core -a
+		./scripts/feeds install -f -p lede_core -a
     fi
 
     # targets need to be installed explicitly

iop/scripts/genconfig.sh

@@ -139,6 +139,7 @@ function genconfig {
 		DEVELOPER=1
 
 		bcmAllowed=0
+		iceAllowed=0
 		endptAllowed=0
 		natalieAllowed=0
 		mediatekAllowed=0
@@ -149,6 +150,7 @@ function genconfig {
 		git ls-remote git@dev.iopsys.eu:dialog/natalie-dect-12.26.git -q 2>/dev/null && natalieAllowed=1
 		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
 		git ls-remote git@dev.iopsys.eu:iopsys/wifilife.git -q 2>/dev/null && wifilifeAllowed=1
+		git ls-remote git@private.inteno.se:ice-client.git -q -q 2>/dev/null && iceAllowed=1
 	}
 
 	v() {
@@ -169,8 +171,8 @@ function genconfig {
 		echo -e "  -a|--list-all\t\tList all Customers and their board types"
 		echo -e "  -b|--boards\t\tList all board types"
 		echo
-		echo "Example ./iop genconfig dg200 TELIA"
-		echo "(if no customerconfig is chosen, iopsys config will be used)"
+		echo "Example ./iop genconfig vg50 TELIA"
+		echo "(if no customerconfig is chosen the Inteno Config will be used)"
 		echo
 		exit 0
 	}
@@ -344,8 +346,6 @@ function genconfig {
 		# Set target version
 		local GIT_TAG=$(git describe --abbrev=0 --tags)
 		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${GIT_TAG}\"" >> .config
-		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
 		# Enable Pckage source tree override if selected
 		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
@@ -356,6 +356,7 @@ function genconfig {
 			# rewrite url to clone with ssh instead of http
 			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
 			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
+			[ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
 			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
 			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
 			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
@@ -363,6 +364,7 @@ function genconfig {
 		else
 			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
+			echo "CONFIG_ICE_OPEN=y" >> .config
 			echo "CONFIG_ENDPT_OPEN=y" >> .config
 			echo "CONFIG_NATALIE_OPEN=y" >> .config
 			echo "CONFIG_MEDIATEK_OPEN=y" >> .config
@@ -437,7 +439,7 @@ function genconfig {
 			shift;
 		done
 
-		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
+		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
 
 		setup_dirs
 		create_and_copy_files "$@"

iop/scripts/generate_tarballs.sh

@@ -59,6 +59,23 @@ build_endptmngr_consumer() {
 	cd "$curdir"
 }
 
+build_ice_consumer() {
+	# create ice-client open version tar file
+	local iceversion icebasever icerelease icecommith
+	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/ice-client/Makefile | head -1 | cut -d'=' -f2)
+	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
+	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
+	iceversion=$icebasever$icerelease
+	[ -n "$target" -a -n "$iceversion" -a -n "$icecommith" ] || return
+	ssh $SERVER "test -f $FPATH/ice-client-$target-$iceversion-$icecommith.tar.gz" && return
+	cd ./build_dir/target-*/ice-client-$icebasever/ipkg-* || cd ./build_dir/target-mips*musl-*/ice-client-$icebasever/ipkg-*
+	tar -czv  ice-client -f ice-client-$target-$iceversion-$icecommith.tar.gz
+	scp -pv ice-client-$target-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
+	cp ice-client-$target-$iceversion-$icecommith.tar.gz $curdir/
+	rm -f ice-client-$target-$iceversion-$icecommith.tar.gz
+	cd "$curdir"
+}
+
 build_wifilife_consumer() {
 	local ver commit
 	ver=$(grep -w "PKG_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
@@ -77,15 +94,16 @@ build_wifilife_consumer() {
 }
 
 build_mediatek_kernel() {
-	local mediatek_commit kernel
+	local mediatek_commit kernel_version kernel
 
 	mediatek_commit=$(grep CONFIG_KERNEL_GIT_COMMIT .config | cut -d '=' -f2 | tr -d '"')
-	kernel=linux-git*
+	kernel_version=$(grep KERNEL_PATCHVER target/linux/iopsys-ramips/Makefile  | cut -d '=' -f2)
+	kernel=linux-${kernel_version}.*
 	[ -n "$mediatek_commit" ] || return
 	ssh $SERVER "test -f $FPATH/mediatek-kernel-open-$mediatek_commit.tar.gz" && return
 	echo "Building mediatek kernel tarball from kernel commit:"	
 	echo $mediatek_commit
-	cd build_dir/target-mipsel_1004kc*/linux-iopsys-ramips*/linux-git*
+	cd build_dir/target-mipsel_1004kc*/linux-iopsys-ramips*/$kernel
 
 	# Save Kconfig files to recreate the same kernel config,
 	# delete everyting else.
@@ -111,14 +129,14 @@ function print_usage {
 
 function generate_tarballs {
 
-    SERVER="god@download.iopsys.eu"
-    FPATH="/var/www/html/iopsys/opensdk"
+    SERVER="god@software.inteno.se"
+    FPATH="/var/www/html/iopsys/consumer"
 
     set -e
     git remote -v | grep -q http && return # do not continue if this is an open SDK environment
 
     target=$(grep CONFIG_TARGET_BOARD .config | cut -d'=' -f2 | tr -d '"')
-    board=$(grep CONFIG_TARGET_FAMILY .config | cut -d'=' -f2 | tr -d '"')
+    board=$(grep CONFIG_TARGET_IBOARDID .config | cut -d'=' -f2 | tr -d '"')
     profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
     majver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f1 -d .)
     minver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f2 -d .)
@@ -151,9 +169,11 @@ function generate_tarballs {
 		build_bcmkernel_consumer
 		build_natalie_consumer
 		build_endptmngr_consumer
+		build_ice_consumer
 		build_wifilife_consumer
 	elif [ "$stk_target" == "mediatek" ]; then
 		build_mediatek_kernel
+		build_ice_consumer		
 		build_wifilife_consumer
 	else
 		echo "Invalid target: $stk_target"

iop/scripts/licenses_gen.sh

@@ -1,35 +0,0 @@
-#!/bin/sh
-function license_report {
-    LICDIR="/tmp/licenses-generator/"
-    LICBIN="${LICDIR}/bin"
-
-
-    dpkg -s python3 python3-requests python3-yaml python3-mako python3-six &> /dev/null
-    if [ $? -ne 0 ]
-        then
-            echo "Missing dependencies"
-            sudo apt-get update
-            sudo apt-get install python3 python3-requests python3-yaml python3-mako python3-six
-
-        else
-            echo    "Dependecy check passed"
-    fi
-
-
-if [ -d "$LICDIR" ]; then
-  ### Take action if $DIR exists ###
-  echo "Creating json licences file and html formated report"
-else
-  ###  Control will jump here if $DIR does NOT exists ###
-  echo "Error: licenses-generator not found. getting from iopsys repo"
-  git clone git@dev.iopsys.eu:iopsys/licenses-generator.git $LICDIR
-fi
-  LICGET=`${LICBIN}/licenses-generator  gen-License bin/`
-  echo $LICGET
-  ${LICBIN}/licenses-generator gen-licrprt $LICGET
-exit 0
-
-}
-
-
-register_command "license_report" "Generate a Licence report on latest build in json format and html under reports"

iopupgrade/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 

iopupgrade/files/sbin/iopu

@@ -21,11 +21,11 @@ upd_ubi_id=""		# num,	UBI volume number for the volume name
 run_cleanup=0		# if set the cleanup should be run otherwise we skip it.
 run_mount_cleanup=0	# set if we should run umount in cleanup
 upd_kernel=0		# set to 1 if system has the kernel in own mtd partition
+upd_cfe=0		# set to 1 if system is using cfe as bootloader.
 log_stdout=1		# set to 0 to prevent the log to also print to stdout
 upd_noreboot=0		# set to 1 if we should not reboot after programming
 upd_forceimage=0	# set this to force upgrade even if image is for wrong board.
 upd_forceboot=0		# set this to force upgrade of boot loader
-upd_keepconfig=0	# set this to keep the current configuration.
 ###############################################################################
 # import external functions
 source /lib/upgrade/iopsys.sh
@@ -52,41 +52,25 @@ function log {
 # anyhting it calls as stdout/stderr might no longer exist
 function finish {
 
-    if [ $run_cleanup -eq 1 ]
+    if [ "$run_cleanup" == "1" ]
     then
 
 	function_call upd_cleanup
-	run_cleanup=0
 	log ""
     fi
 
-    if [ $run_mount_cleanup -eq 1 ]
+    if [ "$run_mount_cleanup" == "1" ]
     then
 	log "Cleaning up after mount"
 	umount_newroot
     fi
     # always kill the timeout process, will leave the sleep but that is harmless
     # as long as the kill will nerver be run.
-    if [ -n "$TIMEOUT_PID" ]; then
-        kill $TIMEOUT_PID 2>/dev/null
-        TIMEOUT_PID=""
-    fi
+    kill $TIMEOUT_PID 2>/dev/null
 
     lock -u /tmp/iopu.lock
 }
 
-function ctrl_c {
-
-    # on ctrl-c we remove the exit handler as it is called directly.
-    trap - EXIT
-
-    # call cleanup function
-    finish
-
-    # do not continue program
-    exit 1
-}
-
 function sig_pipe {
     log_stdout=0  # stdin,stdout,stderr do not exist anymore
     log "Got sigpipe. Turning of log printing to stdout"
@@ -94,6 +78,7 @@ function sig_pipe {
 
 # if a timout happens terminate
 function timeout {
+    finish
     exit 1
 }
 
@@ -149,7 +134,6 @@ function umount_newroot {
     umount /tmp/newroot_overlay/rom
     umount /tmp/newroot_overlay
     umount /tmp/newroot
-    rmdir /tmp/newroot_overlay /tmp/newroot
     run_mount_cleanup=0
 }
 
@@ -158,23 +142,11 @@ function usage {
     echo ""
     echo "opts:"
     echo ""
-    echo "	-n		Do not do the final reboot of the target board"
-    echo "	-c		Keep configuration"
-    echo "	-x		Force install even if firmware is not for this board"
-    echo "	-b		Force install of bootloader regardless of version installed"
-    echo "	-r		Jump into chroot env of other system"
-    echo "	-C \"command\"	Execute command in chroot env of other system"
-}
-
-# Execute command in newroot(other system root)
-function newroot_exec {
-
-    upd_vol=$(get_flashbank_next)
-    mount_newroot
-    (ENV=/sbin/iopu_chroot_env chroot /tmp/newroot_overlay "$@")
-    echo ""
-    umount_newroot
-
+    echo "	-n	Do not do the final reboot of the target board"
+    echo "	-c	Keep configuration"
+    echo "	-x	Force install even if firmware is not for this board"
+    echo "	-b	Force install of bootloader regardless of version installed"
+    echo "	-r	Jump into chroot env of other system"
 }
 
 ###############################################################################
@@ -190,11 +162,10 @@ then
 fi
 
 trap finish EXIT
-trap ctrl_c INT
 trap timeout SIGALRM
 trap sig_pipe SIGPIPE
 
-while getopts "nrxbhcC:" opt; do
+while getopts "nrxb" opt; do
     case $opt in
 	n)
 	    upd_noreboot=1
@@ -205,19 +176,16 @@ while getopts "nrxbhcC:" opt; do
 	b)
 	    upd_forceboot=1
 	    ;;
-	c)
-	    upd_keepconfig=1
-	    ;;
 	r)
-	    newroot_exec /bin/sh
-	    exit
-	    ;;
-	C)
-	    newroot_exec "${OPTARG}"
-	    exit
+	    upd_vol=$(get_flashbank_next)
+	    mount_newroot
+	    (ENV=/sbin/iopu_chroot_env chroot /tmp/newroot_overlay /bin/sh)
+	    echo ""
+	    umount_newroot
+	    exit 0
 	    ;;
 	h)
-	    usage
+	    upd_usage
 	    exit 1
 	    ;;
     esac
@@ -226,7 +194,8 @@ done
 # put a timeout on this if it takes longer than 120 seconds we should abort
 # and clean up
 (
-	sleep 120 && kill -ALRM $$ 2>/dev/null		# send it a SIGALRM signal
+sleep 120	# if 2 minutes pass
+kill -ALRM $$	2>/dev/null # send it a SIGALRM signal
 )&
 TIMEOUT_PID=$!
 
@@ -243,7 +212,7 @@ fi
 cur_vol=$(get_flashbank_current)
 upd_vol=$(get_flashbank_next)
 
-# convert volume name "rootfs_$upd_vol" into ubi volume id
+# convert volume name "rootfs_$upd_vol" into ubifs volume id
 upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
 log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
 
@@ -259,32 +228,29 @@ function_call upd_conf_kernel
 log "now starting writing data to flash with [ iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id ]"
 run_cleanup=1	# When we start to actually write data there might be some
 		# things that need cleanup if we get an error/crash
-if ! iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id; then
-	log "iopupgrade program Failed"
-	exit 1
+iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id
+
+# in case of any error we abort
+if [ $? -ne 0 ]; then
+    log "iopupgrade program Failed"
+    exit 1
 fi
 
 log "Firmware programmed to flash."
 
+
+log "Transfering configuration to new system."
+
 # Force upgrade of boot loader
 [ $upd_forceboot -eq 1 ] && chroot_cmdline="$chroot_cmdline -b"
 
-if [ $upd_keepconfig -eq 1 ]; then
-	log "Transfering configuration to new system."
-	chroot_cmdline="$chroot_cmdline -c"
-fi
-
 mount_newroot
-if ! chroot /tmp/newroot_overlay /sbin/iopu_chroot $chroot_cmdline; then
-	log "Configuration migration failed!"
-	exit 1
-fi
+chroot /tmp/newroot_overlay /sbin/iopu_chroot $chroot_cmdline
 umount_newroot
 
-log "New firmware fully installed."
+log "Update fully installed."
 run_cleanup=0
 
-
 # Now make sure that we actually boot the new system on the next reboot
 upd_finnish
 
@@ -306,3 +272,8 @@ else
 fi
 
 
+
+
+
+
+

iopupgrade/files/sbin/iopu_chroot

@@ -14,7 +14,6 @@
 # by functions declared in this script
 upd_forceboot=0
 log_stdout=1		# set to 0 to prevent the log to also print to stdout
-upd_keepconfig=0	# set this to keep the current configuration.
 
 ###############################################################################
 # import external functions
@@ -25,36 +24,33 @@ source /lib/upgrade/iopsys.sh
 
 # only call function if it exists
 function_call() {
-	if [ -n "$1" ] && type "$1" 2>/dev/null >/dev/null
-	then
-		$1 "$@" || exit
-	fi
+    if type "$1" 2>/dev/null >/dev/null
+    then
+	$1 $@
+    fi
 }
 # Cleanup and error handling functions.
 function log {
-	TIME=$(date)
-	[ $log_stdout -eq 1 ] && echo "$@"
-	echo "[$TIME] $@" >>/root/upd_log
+    TIME=$(date)
+    [ $log_stdout -eq 1 ] && echo "$@"
+    echo "[$TIME] $@" >>/root/upd_log
 }
 
 
-while getopts "hbc" opt; do
-	case $opt in
-		h)
-			upd_usage
-			exit 1
-			;;
-		c)
-			upd_keepconfig=1
-			;;
-		b)
-			upd_forceboot=1
-			;;
-		\?)
-			echo "Invalid option: -$OPTARG" >&2
-			exit 1
-			;;
-	esac
+while getopts "hb" opt; do
+    case $opt in
+	h)
+	    upd_usage
+	    exit 1
+	    ;;
+	b)
+	    upd_forceboot=1
+	    ;;
+	\?)
+	    echo "Invalid option: -$OPTARG" >&2
+	    exit 1
+	    ;;
+    esac
 done
 
 # copy old install log over
@@ -63,9 +59,3 @@ cp /tmp/oldroot/tmp/upd_log /root/upd_log
 # Upgrade boot loader if needed.
 function_call upd_program_boot
 
-# Let the new upgrade do whatever it needs,
-# such as configuration migration etc.
-if [ $upd_keepconfig -eq 1 -a -x /lib/upgrade/post-rootfs-fixup ]; then
-	(/lib/upgrade/post-rootfs-fixup /dev/null /tmp/oldroot) || exit
-fi
-

iwatchdog/Makefile

@@ -1,9 +1,6 @@
-# Copyright (C) 2019 iopsys
 #
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
+# Copyright (C) 2013 Inteno
 #
-
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
@@ -11,9 +8,6 @@ PKG_NAME:=iwatchdog
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 
@@ -28,7 +22,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/iwatchdog
   CATEGORY:=Utilities
-  TITLE:=IOPSYS watchdog
+  TITLE:=Inteno watchdog
 endef
 
 define Package/iwatchdog/description

json-editor/Makefile

@@ -1,32 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=json-editor
-PKG_RELEASE:=1.0.0
-
-PKG_SOURCE_VERSION:=44b32937a062ec4ffc9f7355841dc94ab6efa50f
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/json-editor.git
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/json-editor
-  SECTION:=base
-  CATEGORY:=Libraries
-  DEPENDS:=+libjson-c +libblobmsg-json
-  TITLE:=JSON-editor
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_BUILD_DIR)/src/json-editor.h $(1)/usr/include/
-
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libjson-editor.so $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,json-editor))

libjwt/Makefile

@@ -17,8 +17,6 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_FIXUP:=autoreconf
 
-PKG_LICENSE:=LGPLv3
-PKG_LICENSE_FILES:=COPYING
 include $(INCLUDE_DIR)/package.mk
 
 define Package/libjwt

libmicroxml/Makefile

@@ -1,56 +0,0 @@
-#
-# Copyright (C) 2012-2014 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libmicroxml
-PKG_VERSION:=2012-06-11
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git://dev.freecwmp.org/microxml
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=72965423184f24cc0b963d91c2d1863cdb01b6aa
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_LICENSE:=LGPL-2.0
-PKG_LICENSE_FILES:=COPYING
-
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libmicroxml
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=XML library
-  MAINTAINER:=Luka Perkov <luka@openwrt.org>
-endef
-
-define Package/libmicroxml/description
- A micro sized XML library
-endef
-
-CONFIGURE_ARGS += \
-	--disable-threads \
-	--enable-static \
-	--enable-shared
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_BUILD_DIR)/microxml.h $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_BUILD_DIR)/microxml.pc $(1)/usr/lib/pkgconfig
-endef
-
-define Package/libmicroxml/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
-endef
-
-$(eval $(call BuildPackage,libmicroxml))

libmicroxml/patches/100-fix-memleak.patch

@@ -1,130 +0,0 @@
-diff --git a/mxml-file.c b/mxml-file.c
-index 02eca9d..f10d202 100644
---- a/mxml-file.c
-+++ b/mxml-file.c
-@@ -363,9 +363,12 @@ mxmlSaveFile(mxml_node_t    *node,	/* I - Node to write */
-   * Write the node...
-   */
- 
--  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0)
-+  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0){
-+    global_free(global);
-     return (-1);
--
-+  }
-+  
-+  global_free(global);
-   if (col > 0)
-     if (putc('\n', fp) < 0)
-       return (-1);
-@@ -1448,6 +1451,7 @@ mxml_load_data(
-   if ((buffer = malloc(64)) == NULL)
-   {
-     mxml_error("Unable to allocate string buffer!");
-+    global_free(global);
-     return (NULL);
-   }
- 
-@@ -2083,11 +2087,12 @@ mxml_load_data(
- 		 node->parent ? node->parent->value.element.name : "(null)");
- 
-       mxmlDelete(first);
--
-+      global_free(global);
-       return (NULL);
-     }
-   }
- 
-+  global_free(global);
-   if (parent)
-     return (parent);
-   else
-@@ -2102,7 +2107,7 @@ error:
-   mxmlDelete(first);
- 
-   free(buffer);
--
-+  global_free(global);
-   return (NULL);
- }
- 
-diff --git a/mxml-private.c b/mxml-private.c
-index 4378ca3..ea6e452 100644
---- a/mxml-private.c
-+++ b/mxml-private.c
-@@ -41,6 +41,32 @@
-  * This code currently supports AIX, HP-UX, Linux, Mac OS X, Solaris, and
-  * Windows.  It might work on the BSDs and IRIX, but I haven't tested that.
-  */
-+void *global_mem[16] = {0};
-+
-+static void *global_calloc(int x, int size)
-+{
-+  int i;
-+  void *m = calloc(x, size);
-+  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i > 0; i--) {
-+    global_mem[i] = global_mem[i-1];
-+  }
-+  global_mem[0] = m;
-+  return m;
-+}
-+
-+void global_free(void *m)
-+{
-+  int i;
-+  if (m == NULL)
-+    return;
-+  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i >= 0; i--) {
-+    if (global_mem[i] == m) {
-+      global_mem[i] = NULL;
-+      free(m);
-+      break;
-+    }
-+  }
-+}
- 
- #if defined(__sun) || defined(_AIX)
- #  pragma fini(_mxml_fini)
-@@ -148,7 +174,6 @@ mxml_real_cb(mxml_node_t *node)		/* I - Current node */
-   return (MXML_REAL);
- }
- 
--
- #ifdef HAVE_PTHREAD_H			/**** POSIX threading ****/
- #  include <pthread.h>
- 
-@@ -190,7 +215,6 @@ _MXML_FINI(void)
-   }
- }
- 
--
- /*
-  * '_mxml_global()' - Get global data.
-  */
-@@ -205,7 +229,7 @@ _mxml_global(void)
- 
-   if ((global = (_mxml_global_t *)pthread_getspecific(_mxml_key)) == NULL)
-   {
--    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
-+    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
-     pthread_setspecific(_mxml_key, global);
- 
-     global->num_entity_cbs = 1;
-@@ -288,7 +312,7 @@ _mxml_global(void)
- 
-   if ((global = (_mxml_global_t *)TlsGetValue(_mxml_tls_index)) == NULL)
-   {
--    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
-+    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
- 
-     global->num_entity_cbs = 1;
-     global->entity_cbs[0]  = _mxml_entity_cb;
-diff --git a/mxml-private.h b/mxml-private.h
-index c591208..72ed338 100644
---- a/mxml-private.h
-+++ b/mxml-private.h
-@@ -43,3 +43,4 @@ typedef struct _mxml_global_s
- extern _mxml_global_t	*_mxml_global(void);
- extern int		_mxml_entity_cb(const char *name);
- 
-+extern void global_free(void *m);

libpicoevent/Makefile

@@ -14,8 +14,6 @@ PKG_SOURCE_PROTO:=git
 PKG_SOURCE_VERSION:=7875222706cb6999af0361ef0aebdc85cd75c127
 PKG_NAME:=libpicoevent
 
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 

librpc/Makefile

@@ -1,33 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=librpc
-PKG_RELEASE=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL=$(LEDE_GIT)/project/librpc-uclibc.git
-PKG_SOURCE_DATE:=2015-11-04
-PKG_SOURCE_VERSION:=a921e3ded051746f9f7cd5e5a312fb6771716aac
-PKG_MIRROR_HASH:=22c8dc55e1c4e8e31635a37708a3ce622a6ca33ebd918a4321b0be6ffce89b21
-CMAKE_INSTALL:=1
-PKG_USE_MIPS16:=0
-
-PKG_LICENSE:=LGPL-2.1
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/librpc
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=uClibc RPC library
-endef
-
-define Package/librpc/install
-	$(INSTALL_DIR) $(1)/lib/
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/librpc.so $(1)/lib/
-endef
-
-$(eval $(call BuildPackage,librpc))

libtrace/Makefile

@@ -12,9 +12,6 @@ PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 PKG_INSTALL:=1
 PKG_FIXUP:=autoreconf
 

lmbench/Makefile

@@ -15,9 +15,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tgz
 PKG_SOURCE_URL:=@SF/lmbench/
 PKG_MD5SUM:=b3351a3294db66a72e2864a199d37cbf
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 PKG_BUILD_DEPENDS:=librpc
 
 include $(INCLUDE_DIR)/package.mk

logrotate/Makefile

@@ -19,9 +19,6 @@ PKG_CAT:=zcat
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/logrotate

loop-detector/Makefile

@@ -1,9 +1,3 @@
-# Copyright (C) 2019 iopsys
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=loop-detector
@@ -17,9 +11,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 include $(INCLUDE_DIR)/package.mk
 
 

ltq-nand/Makefile

@@ -16,9 +16,6 @@ PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/archive/
 #PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand.git
 #PKG_SOURCE_VERSION:=07b5b0331af6de4174dab2c02bf260ee9625452a
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/host-build.mk
 
 

mqtt-ciotc/Makefile

@@ -16,8 +16,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=Apache-2.0
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/mqtt-ciotc

multiwan/Makefile

@@ -11,8 +11,6 @@ PKG_NAME:=multiwan
 PKG_VERSION:=1.0.22
 PKG_RELEASE:=2
 
-PKG_LICENSE:=GPLv2
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/multiwan

natalie-dect-h/Makefile

@@ -16,8 +16,6 @@ PKG_SOURCE_PROTO:=git
 PKG_SOURCE_VERSION:=9e2236989ff58d0db897f938b6b07b535144e0e2
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=PROPRIETARY RTX
-
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/image.mk
 include $(INCLUDE_DIR)/kernel.mk

natalie-dect/Makefile

@@ -1,5 +1,8 @@
 #
-# Copyright (C) 2019 IOPSYS Software Solutions AB
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
@@ -11,7 +14,7 @@ PKG_SOURCE_VERSION:=378c404fba3efc8f1bcde54370a5370670fa1853
 ifeq ($(CONFIG_NATALIE_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://download.iopsys.eu/iopsys/opensdk/
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_NAME:=natalie-dect-open
 else
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
@@ -22,8 +25,6 @@ endif
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_PARALLEL:=1
 
-PKG_LICENSE:=PROPRIETARY
-
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/image.mk
 include $(INCLUDE_DIR)/kernel.mk

ndisc/Makefile

@@ -15,9 +15,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=http://www.remlab.net/files/ndisc6
 PKG_MD5SUM:=50cb4c19606cf6ff2b7388e71832f579
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 PKG_INSTALL:=1
 
 include $(INCLUDE_DIR)/package.mk

ndt/Makefile

@@ -12,9 +12,6 @@ PKG_BUILD_DIR:=${BUILD_DIR}/ndt-$(PKG_VERSION)
 PKG_SOURCE:=ndt-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=http://software.internet2.edu/sources/ndt
 
-PKG_LICENSE:=NONSTANDARD_PERMISSIV
-PKG_LICENSE_FILES:=COPYRIGHT
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/ndt

netmode/Makefile

@@ -1,16 +1,9 @@
-#
-# Copyright (C) 2019 iopsys
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=netmode
 PKG_VERSION:=0.2.0
 
-PKG_SOURCE_VERSION:=6406325e72d7ddd0ff7aaa3a87669519021bdb11
+PKG_SOURCE_VERSION:=9fa23664b3bdd963e4556f5921c9f9be1c9c578f
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/netmoded
 
@@ -18,9 +11,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/netmode

netmode/files/etc/init.d/netmode

@@ -12,7 +12,7 @@ start_netmoded() {
 	procd_open_instance
 	procd_set_param command $NETMODED
 
-	procd_append_param command --verbose warning -i macaddr
+	procd_append_param command --verbose warning
 	procd_set_param stdout 1
 	procd_set_param stderr 1
 

netmode/files/etc/netmodes/bridged/DETAILS

@@ -12,8 +12,7 @@
 		"CG300",
 		"CG301",
 		"EX400",
-		"SDX810-AP",
-		"NORRLAND"
+		"SDX810-AP"
 	],
 	"acl" : [
 		"admin",

netmode/files/etc/netmodes/bridged/network

@@ -18,8 +18,8 @@ config interface 'lan'
 config interface 'wan'
 	option type 'anywan'
 	option proto 'dhcp'
-	#option hostname AUTO-CREATED AT FIRST BOOT
-	#option vendorid AUTO-CREATED AT FIRST BOOT
+	option hostname 'iopsys-$MAC'
+	option vendorid '$HARDWAREID'
 	option ifname 'ptm0.1 atm0.1 $WAN.1'
 	option ipv6 '1'
 

netmode/files/etc/netmodes/bridged/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -38,15 +42,15 @@ config wifi-iface
 	option device 'wl0'
 	option network 'lan'
 	option mode 'ap'
-	#option ssid AUTO-CREATED AT FIRST BOOT
+	option ssid 'iopsys-$BSSID4'
 	option encryption 'psk2'
 	option cipher 'auto'
-	#option key AUTO-CREATED AT FIRST BOOT
+	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl0'
 
 config wifi-device 'wl1'
@@ -78,14 +82,14 @@ config wifi-iface
 	option device 'wl1'
 	option network 'lan'
 	option mode 'ap'
-	#option ssid AUTO-CREATED AT FIRST BOOT
+	option ssid 'iopsys-$BSSID4'
 	option encryption 'mixed-psk'
 	option cipher 'auto'
-	#option key AUTO-CREATED AT FIRST BOOT
+	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl1'
 

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS

@@ -9,8 +9,7 @@
 	],
 	"excluded_boards" : [
 		"*G*",
-		"F*",
-		"NORRLAND"
+		"F*"
 	],
 	"uplink_band" : 'a',
 	"downlink_band" : 'a b',

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/network

@@ -6,24 +6,21 @@ config interface 'loopback'
 
 config device 'lan_dev'
 	option name 'eth0.1'
-	# Unused?
-	#option macaddr '$MACLAN'
+	option macaddr '$MACLAN'
 	option vid 1
 
 config interface 'wan'
 	option type 'bridge'
 	option ifname 'eth0.2 eth0.1'
 	option proto 'dhcp'
-	#option hostname AUTO-CREATED AT FIRST BOOT
+	option hostname 'iopsys-$MAC'
 	option reqopts '66 67 128 224'
 	option igmp_snooping '0'
-	# Unused?
-	#option macaddr '$MACWAN'
+	option macaddr '$MACWAN'
 
 config device 'wan_dev'
 	option name 'eth0.2'
-	# Unused?
-	#option macaddr '$MACWAN'
+	option macaddr '$MACWAN'
 	option vid 2
 
 config interface 'wan6'

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/disable_ubusproxy.sh

@@ -1,2 +0,0 @@
-uci -q set owsd.ubusproxy.enable="0"
-uci -q commit owsd

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device  ra0
 	option band b
 	option channel  auto
@@ -19,11 +23,11 @@ config wifi-iface
 	option device   ra0
 	option network  wan
 	option mode     ap
-	#option ssid AUTO-CREATED AT FIRST BOOT
+	option ssid     iopsys-$BSSID4
 	option encryption psk2
-	#option key AUTO-CREATED AT FIRST BOOT
+	option key      $WPAKEY
 	option ifname	ra0
-	option wps	1
+	option wps_pbc	1
 
 config wifi-device  rai0
 	option band a
@@ -38,18 +42,18 @@ config wifi-iface
 	option device   rai0
 	option network  wan
 	option mode     ap
-	#option ssid AUTO-CREATED AT FIRST BOOT
+	option ssid     iopsys-$BSSID4
 	option encryption psk2
-	#option key AUTO-CREATED AT FIRST BOOT
+	option key      $WPAKEY
 	option ifname	rai0
-	option wps	1
+	option wps_pbc	1
 
 config wifi-iface
 	option device   rai0
 	option network  wan
 	option mode     wet
-	#option ssid AUTO-CREATED AT FIRST BOOT
+	option ssid     iopsys-$BSSID4
 	option encryption psk2
-	#option key AUTO-CREATED AT FIRST BOOT
+	option key      $WPAKEY
 	option ifname	apclii0
 

netmode/files/etc/netmodes/routed_brcm/DETAILS

@@ -9,8 +9,7 @@
 	],
 	"excluded_boards" : [
 		"EX4*",
-		"SDX810-AP",
-		"NORRLAND"
+		"SDX810-AP"
 	],
 	"credentials" : 0
 }

netmode/files/etc/netmodes/routed_brcm/network

@@ -18,8 +18,8 @@ config interface 'lan'
 config interface 'wan'
 	option type 'anywan'
 	option proto 'dhcp'
-	#option hostname AUTO-CREATED AT FIRST BOOT
-	#option vendorid AUTO-CREATED AT FIRST BOOT
+	option hostname 'iopsys-$MAC'
+	option vendorid '$HARDWAREID'
 	option ifname 'ptm0.1 atm0.1 $WAN.1'
 	option ipv6 '1'
 

netmode/files/etc/netmodes/routed_brcm/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -38,15 +42,15 @@ config wifi-iface
 	option device 'wl0'
 	option network 'lan'
 	option mode 'ap'
-	#option ssid AUTO-CREATED AT FIRST BOOT
+	option ssid 'iopsys-$BSSID4'
 	option encryption 'psk2'
 	option cipher 'auto'
-	#option key AUTO-CREATED AT FIRST BOOT
+	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl0'
 
 config wifi-device 'wl1'
@@ -78,14 +82,14 @@ config wifi-iface
 	option device 'wl1'
 	option network 'lan'
 	option mode 'ap'
-	#option ssid AUTO-CREATED AT FIRST BOOT
+	option ssid 'iopsys-$BSSID4'
 	option encryption 'mixed-psk'
 	option cipher 'auto'
-	#option key AUTO-CREATED AT FIRST BOOT
+	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl1'
 

netmode/files/etc/netmodes/routed_mtk/DETAILS

@@ -9,8 +9,7 @@
 	],
 	"excluded_boards" : [
 		"*G*",
-		"F*",
-		"NORRLAND"
+		"F*"
 	],
 	"reboot" : 0,
 	"credentials" : 0

netmode/files/etc/netmodes/routed_mtk/network

@@ -15,21 +15,19 @@ config interface 'lan'
 
 config device 'lan_dev'
 	option name 'eth0.1'
-	# Unused?
-	#option macaddr '$MACLAN'
+	option macaddr '$MACLAN'
 	option vid 1
 
 config interface 'wan'
 	option ifname 'eth0.2'
 	option proto 'dhcp'
-	#option hostname AUTO-CREATED AT FIRST BOOT
-	#option vendorid AUTO-CREATED AT FIRST BOOT
+	option hostname 'iopsys-$MAC'
+	option vendorid '$HARDWAREID'
 	option reqopts '66 67 128 224'
 
 config device 'wan_dev'
 	option name 'eth0.2'
-	# Unused?
-	#option macaddr '$MACWAN'
+	option macaddr '$MACWAN'
 	option vid 2
 
 config interface 'wan6'

netmode/files/etc/netmodes/routed_mtk/omcproxy

@@ -0,0 +1,10 @@
+config proxy
+	option scope global
+	option uplink wan
+	list downlink lan
+
+config proxy
+	option scope global
+	option uplink wan6
+	list downlink lan
+

netmode/files/etc/netmodes/routed_mtk/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device  ra0
 	option band b
 	option channel  auto
@@ -23,7 +27,7 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps	1
+	option wps_pbc	1
 	option ifname	ra0
 
 config wifi-device  rai0
@@ -43,6 +47,6 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps	1
+	option wps_pbc	1
 	option ifname	rai0
 

netmode/files/lib/functions/netmode.sh

@@ -5,7 +5,6 @@
 
 NMTMPDIR=/var/netmodes
 OLD_MODE_FILE=/var/netmodes/old_mode
-CONF_BACKUP_DIR=/var/netmodes/backup/
 SWITCHMODELOCK="/tmp/switching_mode"
 MODEDIR=$(uci -q get netmode.setup.dir)
 MTK=0
@@ -121,13 +120,8 @@ run_netmode_scripts() {
 	local mode=$1
 	local when=$2
 	local script
-	local path
-
-	path=$(readlink -f /etc/netmodes/$mode/)
-	[ "${path:0:14}" == "/etc/netmodes/" ] || exit
-
 	if [ -d /etc/netmodes/$mode/scripts/$when ]; then
-		logger -s -p user.info -t "netmode" "Executing $when netmode scripts" >/dev/console
+		logger -s -p user.info -t $0 "[netmode] Executing $when netmode scripts" >/dev/console
 		for script in $(ls /etc/netmodes/$mode/scripts/$when/); do
 			sh /etc/netmodes/$mode/scripts/$when/$script
 		done
@@ -185,12 +179,7 @@ switch_netmode() {
 
 	run_netmode_scripts $curmode "pre"
 
-	# make backup of current config before switching
-	rm -rf $CONF_BACKUP_DIR
-	mkdir -p $CONF_BACKUP_DIR
-	cp -af /etc/config/* $CONF_BACKUP_DIR
-
-	logger -s -p user.info -t "netmode" "Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
+	logger -s -p user.info -t $0 "[netmode] Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
 
 	for file in $(ls /etc/netmodes/$curmode/); do
 		case "$file" in
@@ -215,10 +204,11 @@ switch_netmode() {
 	case "$curmode" in
 		repeater*)
 			touch $SWITCHMODELOCK
-			logger -s -p user.info -t "netmode" "Switching to $curmode mode" > /dev/console
+			logger -s -p user.info -t $0 "Switching to $curmode mode" > /dev/console
 			ubus call leds set  '{"state" : "allflash"}'
+			[ -f /etc/init.d/omcproxy ] && /etc/init.d/omcproxy stop
+			[ -f /etc/init.d/igmpproxy ] && /etc/init.d/igmpproxy stop
 			[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
-			[ -f /etc/init.d/macoffset ] && /etc/init.d/macoffset reload
 			ubus call network reload
 			wifi reload nodat
 			ubus call router.network reload
@@ -229,7 +219,6 @@ switch_netmode() {
 		;;
 		*)
 			[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
-			[ -f /etc/init.d/macoffset ] && /etc/init.d/macoffset reload
 			ubus call uci commit '{"config":"network"}'
 		;;
 	esac
@@ -237,27 +226,6 @@ switch_netmode() {
 	run_netmode_scripts $curmode "post"
 }
 
-revert_netmode() {
-	local from="$1"
-	local to="$2"
-	local rready="$3"
-
-	ubus call leds set  '{"state" : "allflash"}'
-	logger -s -p user.info -t "netmode" "Could not switch to '$from' mode; going back to '$to' mode" > /dev/console
-	cp -af $CONF_BACKUP_DIR/* /etc/config/
-	sync
-	uci -q set netmode.setup.curmode="$to"
-	uci -q set netmode.setup.repeaterready="$rready"
-	uci commit netmode
-	rm -rf $CONF_BACKUP_DIR
-	rm -rf $OLD_MODE_FILE
-
-	logger -s -p user.info -t "netmode" "Restarting network services" > /dev/console
-	/etc/init.d/network restart
-	ubus call router.network reload
-	ubus call leds set  '{"state" : "normal"}'
-}
-
 wificontrol_takes_over() {
 	local ret
 	[ -f /sbin/wificontrol ] || return
@@ -292,10 +260,10 @@ wait_for_netmode_handler() {
 
 netmode_get_ip_type() {
 	[ -n "$(echo $1 | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ] && {
-		logger -t $0 "netmode_get_ip_type: ip $1 is private"
+		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is private"
 		echo "private"
 	} || {
-		logger -t $0 "netmode_get_ip_type: ip $1 is public"
+		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is public"
 		echo "public"
 	}
 }
@@ -383,7 +351,7 @@ populate_netmodes() {
 	done
 
 	local hardware=$(db get hw.board.hardware)
-	local keys lang desc exp exclude support
+	local keys lang desc exp exclude
 	for mode in $(ls $MODEDIR); do
 
 			case "$mode" in
@@ -413,23 +381,6 @@ populate_netmodes() {
 				done
 				json_select ..
 				[ $exclude -eq 1 ] && continue
-			elif json_select supported_boards; then
-				support=0
-				_i=1
-				while json_get_var board $_i; do
-					case "$hardware" in
-						$board)
-							support=1
-							break
-						;;
-					esac
-					_i=$((_i+1))
-				done
-				json_select ..
-				[ $support -eq 1 ] || {
-					uci -q delete netmode.$mode
-					continue
-				}
 			fi
 
 			if json_select acl; then

netmode/files/usr/libexec/rpcd/repeater

@@ -3,10 +3,6 @@
 . /usr/share/libubox/jshn.sh
 . /lib/functions.sh
 
-WIFISTA=0
-STACONF="/etc/Wireless/iNIC/iNIC_ap.dat"
-[ -f $STACONF ] && WIFISTA=1
-
 get_if_creds() {
 	local section=$1
 	local network=$2
@@ -88,22 +84,9 @@ duplicate_if_single_radio() {
 	done
 }
 
-get_wifi_iface_cfgstr() {
-	get_cfgno() {
-		config_get ifname "$1" ifname
-		[ "$ifname" == "$2" ] && echo "wireless.$1"
-	}
-	config_load wireless
-	config_foreach get_cfgno wifi-iface $1
-}
-
 case "$1" in
 	list)
-		if [ $WIFISTA -eq 1 ]; then
-			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" }, "connect": { "ssid": "str", "key": "str" }, "forget_network": {}, "wps_enroll": {}, "wps_stop": {} }'
-		else
-			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
-		fi
+		echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
 	;;
 	call)
 		case "$2" in
@@ -153,88 +136,6 @@ case "$1" in
 				json_dump
 
 			;;
-			connect)
-				local ssid key enc auth wetif wetcfg wetssid wetkey code
-				read input
-				json_load "$input"
-				json_get_var ssid ssid
-				json_get_var key key
-				code=1
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -s /sys/class/net/$wetif/operstate ]; then
-					wetcfg="$(get_wifi_iface_cfgstr $wetif)"
-					wetssid="$(uci -q get $wetcfg.ssid)"
-					wetkey="$(uci -q get $wetcfg.key)"
-					ssid="${ssid:-$wetssid}"
-					key="${key:-$wetkey}"
-					if [ -n "$key" ]; then
-						auth="WPA2PSK"
-						enc="AES"
-					else
-						auth="OPEN"
-						enc="NONE"
-					fi
-					iwpriv $wetif set ApCliEnable=0
-					iwpriv $wetif set ApCliSsid="$ssid"
-					iwpriv $wetif set ApCliAuthMode="$auth"
-					iwpriv $wetif set ApCliEncrypType="$enc"
-					iwpriv $wetif set ApCliWPAPSK="$key"
-					iwpriv $wetif set ApCliEnable=1
-					iwpriv $wetif set ApCliAutoConnect=1
-					code=0
-				fi
-				json_init
-				json_add_int "code" $code
-				json_dump
-			;;
-			forget_network)
-				local wetif wetcfg code
-				code=1
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -s /sys/class/net/$wetif/operstate ]; then
-					wetcfg="$(get_wifi_iface_cfgstr $wetif)"
-					uci -q set $wetcfg.ssid=""
-					uci -q set $wetcfg.key=""
-					uci -q commit wireless
-
-					sed -i "s/ApCliSsid=.*/ApCliSsid=/g" $STACONF
-					sed -i "s/ApCliAuthMode=.*/ApCliAuthMode=/g" $STACONF
-					sed -i "s/ApCliEncrypType=.*/ApCliEncrypType=/g" $STACONF
-					sed -i "s/ApCliWPAPSK=.*/ApCliWPAPSK=/g" $STACONF
-
-					ifconfig $wetif down
-					ifconfig $wetif up
-
-					code=0
-				fi
-				json_init
-				json_add_int "code" $code
-				json_dump
-			;;
-			wps_enroll)
-				local wetif
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -n "$wetif" ]; then
-					iwpriv $wetif set ApCliEnable=0
-					iwpriv $wetif set WscConfMode=1
-					iwpriv $wetif set WscMode=2
-					iwpriv $wetif set ApCliEnable=1
-					iwpriv $wetif set WscGetConf=1
-				fi
-				json_init
-				json_add_string "ifname" $wetif
-				json_dump
-			;;
-			wps_stop)
-				local wetif
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -n "$wetif" ]; then
-					iwpriv $wetif set WscStop=1
-				fi
-				json_init
-				json_add_string "ifname" $wetif
-				json_dump
-			;;
 		esac
 	;;
 esac

obuspa/Makefile

@@ -1,58 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=obuspa
-PKG_VERSION:=2.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=9c7921c8e39acfc31f563bd08220faba1012a834
-PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_FIXUP:=autoreconf
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/obuspa
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=USP agent
-  DEPENDS:=+libcoap +libopenssl +libcurl +libsqlite3 +libcares +libubox +libubus +libblobmsg-json +uspd
-endef
-
-define Package/obuspa/description
- OB-USP-AGENT is a system daemon providing a User Services Platform (USP) Agent.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
-
-ifneq ($(CONFIG_USE_MUSL),)
-TARGET_CFLAGS += -DUSE_MUSL
-endif
-
-#define Build/Prepare
-#        $(CP) -rf ./obuspa/* $(PKG_BUILD_DIR)/
-#endef
-
-define Package/obuspa/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/obuspa
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/obuspa $(1)/usr/sbin/
-	$(INSTALL_BIN) ./files/etc/init.d/obuspa $(1)/etc/init.d/
-	$(INSTALL_DATA) ./files/etc/config/obuspa $(1)/etc/config/
-endef
-
-$(eval $(call BuildPackage,obuspa))

obuspa/files/etc/config/obuspa

@@ -1,41 +0,0 @@
-# controller, mtp, connection makes a group and related to one another
-# ex: first controller will be mapped to first mtp and first connection
-# details, always defined in groups
-
-config obuspa
-	option cert '/etc/obuspa/rootCA.pem'
-	option interface 'wan'
-	option debug 'false'
-
-config controller
-	option endpointid 'self::usp-controller.com'
-	option enable 'true'
-	# Trust cerificate number
-	option AssignedRole 1
-	option PeriodicNotifInterval "86400"
-	option PeriodicNotifTime "0001-01-01T00:00:00Z"
-	option USPRetryMinimumWaitInterval "5"
-	option USPRetryIntervalMultiplier "2000"
-	option ControllerCode ""
-	option protocol 'STOMP'
-
-config mtp
-	option enable 'true'
-	option protocol 'STOMP'
-	option destination ''
-
-config connection
-	option host 'usp-controller.com'
-	option username 'username'
-	option password 'password'
-	option encryption 'true'
-	option enable 'true'
-	option port 61613
-	option virtualhost '/'
-	option EnableHeartbeats "true"
-	option OutgoingHeartbeat "30000"
-	option IncomingHeartbeat "300000"
-	option ServerRetryInitialInterval "60"
-	option ServerRetryIntervalMultiplier "2000"
-	option ServerRetryMaxInterval "30720"
-