gigaset-elements 2.4.2 - dg400 integration, dectmngr2 support

2025-12-27 12:33:49 +08:00 · 2016-10-28 13:43:29 +02:00
338 changed files with 7196 additions and 20713 deletions
--- a/4g-support/Makefile
+++ b/4g-support/Makefile
@@ -0,0 +1,31 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=4g-support
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/4g-support
+  CATEGORY:=Network
+  TITLE:=4G Network Setup Tools
+endef
+
+define Package/4g-support/description
+	4g-support contains necessary tools to setup 4G WAN connection
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/4g-support/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,4g-support))
--- a/4g-support/files/etc/gcom/ncmconnection.gcom
+++ b/4g-support/files/etc/gcom/ncmconnection.gcom
@@ -0,0 +1,62 @@
+opengt
+set com 115200n81
+set comecho off
+set senddelay 0.05
+waitquiet 1 0.2
+
+:start
+ if $env("USE_DISCONNECT")="1" goto disconnect
+ send "AT^^NDISDUP=1,1,\""
+ send $env("USE_APN")
+
+ if $env("USE_AUTHTYPE")="-1" goto noauth
+ else goto auth
+
+:noauth
+ send "\"^m"
+ goto result
+
+:auth
+ send "\",\""
+ send $env("USE_USERID")
+ send "\",\""
+ send $env("USE_PASSWORD")
+ send "\","
+ send $env("USE_AUTHTYPE")
+ send "^m"
+ goto result
+
+:result
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto connok
+ if % = 1 goto connerr
+ if % = 2 goto connerr
+
+:connok
+ print "WWAN connection established.\r\n"
+ goto done
+
+:connerr
+ print "WWAN error. Connection failed.\r\n"
+ exit 1
+
+:disconnect
+ send "AT^^NDISDUP=1,0,\""
+ send $env("USE_APN")
+ send "\"^m"
+
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto disconnok
+ if % = 1 goto disconnerr
+ if % = 2 goto disconnerr
+
+:disconnok
+ print "WWAN connection disconnected.\r\n"
+ goto done
+
+:disconnerr
+ print "WWAN disconnection error.\r\n"
+ exit 1
+
+:done
+ exit 0
--- a/4g-support/files/etc/hotplug.d/net/05-mobile
+++ b/4g-support/files/etc/hotplug.d/net/05-mobile
@@ -0,0 +1,35 @@
+. /lib/network/config.sh
+. /usr/share/libubox/jshn.sh
+
+iface_status() {
+	local iface=$1
+	local up
+	json_load "$(ifstatus $iface)"
+	json_get_var up up
+	json_close_object
+	return $up
+}
+
+case "$ACTION" in
+        add|register)
+                if [ "${INTERFACE:0:4}" == "wwan" ]; then
+                        netname=$(get_network_of "$INTERFACE")
+                        for net in $netname; do
+				local service=$(uci -q get network.$net.service)
+				local cnt=0
+				while $(iface_status $net); do
+		                        ifup $net
+					if [ "$service" == "qmi" ]; then
+						cnt=$(($cnt+1))
+						# quit trying if still not online after three times
+						[ $cnt -eq 3 ] && break
+						sleep 5
+					else
+						break
+					fi
+				done
+                        done
+                fi
+        ;;
+esac
+
--- a/4g-support/files/etc/hotplug.d/usb/30-usbnet
+++ b/4g-support/files/etc/hotplug.d/usb/30-usbnet
@@ -0,0 +1,66 @@
+#!/bin/sh
+
+local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev usbno usbbr
+
+sanitize() {
+	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
+}
+
+find_usb_attrs() {
+	usb_dir="/sys/$DEVPATH"
+	[ -f "$usb_dir/idVendor" ] || usb_dir="${usb_dir%/*}"
+
+	uVid=$(cat "$usb_dir/idVendor")
+	uPid=$(cat "$usb_dir/idProduct")
+	uMa=$(sanitize "$usb_dir/manufacturer")
+	uPr=$(sanitize "$usb_dir/product")
+	uSe=$(sanitize "$usb_dir/serial")
+	bNumConfs=$(cat "$usb_dir/bNumConfigurations")
+	bConf=$(cat "$usb_dir/bConfigurationValue")
+	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
+	if [ -n "$cdcdev" ]; then
+		comdev=$cdcdev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$4}' | head -1)
+	else
+		comdev=$ttydev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$4}' | head -1)
+	fi
+	[ -n "$mdmtyp" ] || mdmtyp=$(grep $uVid:$uPid /etc/modemdb | awk '{print$2}' | head -1)
+	[ -n "$vendor" ] || vendor=$(grep $uVid:$uPid /etc/modemdb | awk '{print$3}' | head -1)
+	[ -n "$product" ] || product=$(grep $uVid:$uPid /etc/modemdb | awk '{print$4}' | head -1)
+}
+
+convert_to_mbim() {
+	if [ "$mdmtyp" == "mbim" ] && [ "$bNumConfs" == "2" ]; then
+		[ "$bConf" == "2" ] || echo 2 > $usb_dir/bConfigurationValue
+	fi
+}
+
+usbno=$(echo $DEVPATH | cut -d'/' -f5)
+usbbr=$(echo $DEVPATH | cut -d'/' -f7)
+case "$usbbr" in
+	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
+esac
+
+find_usb_attrs
+if [ "$ACTION" = add ]; then
+	convert_to_mbim "$uVid:$uPid"
+	if [ -n "$uVid" ] && [ -n "$uPid" ] && [ -n "$mdmtyp" ] && [ -n "$netdev" ] && [ -n "$comdev" ]; then
+		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+			sed -i "/$usbno:$usbbr/ d" /var/usbnets
+			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
+		fi
+	fi
+fi
+
+if [ "$ACTION" = remove ]; then
+	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+		sed -i "/$usbno:$usbbr/ d" /var/usbnets
+	fi
+fi
--- a/4g-support/files/etc/modemdb
+++ b/4g-support/files/etc/modemdb
@@ -0,0 +1,100 @@
+1bbb:011e	qmi
+1a8d:1001	ecm
+1a8d:100c	ecm
+1a8d:100d	ecm
+16d8:6280	qmi
+16d8:6803	qmi
+16d8:6804	qmi
+16d8:7003	qmi
+16d8:700a	qmi
+2001:7d01	mbim
+2001:7d02	mbim
+2001:7d03	mbim
+12d1:14ac	qmi
+12d1:140c	qmi
+12d1:1506	qmi	Huawei		E367/392/398
+12d1:1506	ncm	Huawei		E3276
+12d1:14d2	qmi
+12d1:1c07	ncm
+12d1:1436	ecm
+12d1:14c9	qmi
+12d1:14db	ecm
+12d1:151d	mbim
+12d1:151e	qmi	Huawei		E353
+12d1:1c1e	ncm
+12d1:150c	qmi
+12d1:150f	qmi
+12d1:151b	qmi
+12d1:142d	ecm
+12d1:1432	ecm
+12d1:1c1f	ncm
+12d1:1433	qmi
+12d1:1465	ecm
+12d1:14ca	qmi
+12d1:14cf	ncm
+12d1:14bc	ecm
+12d1:14ae	ecm
+12d1:1576	mbim
+12d1:1577	mbim
+12d1:1400	mbim
+12d1:14f7	mbim
+12d1:1464	qmi
+12d1:14cb	qmi
+12d1:14cc	qmi
+12d1:14c6	qmi
+12d1:14fa	mbim
+12d1:1578	mbim
+12d1:14c8	qmi
+12d1:14f8	mbim
+12d1:1575	mbim
+12d1:1579	mbim
+12d1:157a	mbim
+12d1:157b	mbim
+12d1:157f	mbim
+12d1:1f16	mbim	Vodafone	K5150
+12d1:1404	qmi
+19f2:1700	ecm	
+1410:b001	qmi
+1527:1000	ecm
+0b3c:c005	qmi
+0f3d:68a2	qmi
+1199:68a2	qmi	SierraWireless	M7710
+1199:68c0	qmi	SierraWireless	M7304
+1349:1100	qmi
+1349:1200	qmi	
+1199:683c	qmi
+2360:2100	qmi
+2360:2200	qmi
+2360:2300	qmi
+2507:0000	qmi	
+19d2:0055	qmi
+19d2:0052	qmi
+19d2:0063	qmi
+19d2:1008	qmi
+19d2:1010	qmi
+19d2:2002	qmi
+19d2:1176	qmi
+19d2:1023	mbim
+19d2:0104	qmi
+19d2:1018	qmi
+19d2:1032	mbim
+19d2:1402	qmi
+19d2:1405	ecm
+19d2:1426	qmi
+19d2:0031	qmi
+19d2:0124	qmi
+19d2:1254	qmi
+19d2:0017	qmi
+19d2:0002	qmi
+19d2:0121	qmi
+19d2:1252	qmi
+19d2:0157	qmi
+19d2:0167	qmi
+19d2:0199	qmi
+19d2:0257	qmi
+19d2:0326	qmi
+19d2:0349	ecm
+19d2:1408	ecm
+19d2:0284	qmi
+19d2:0019	qmi
+19d2:0265	qmi
--- a/4g-support/files/lib/netifd/proto/4g.sh
+++ b/4g-support/files/lib/netifd/proto/4g.sh
@@ -0,0 +1,159 @@
+#!/bin/sh
+INCLUDE_ONLY=1
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_4g_init_config() {
+	proto_config_add_string "modem"
+	proto_config_add_string "service"
+	proto_config_add_string "comdev"
+	proto_config_add_string "ipaddr"
+	proto_config_add_string "netmask"
+	proto_config_add_string "hostname"
+	proto_config_add_string "clientid"
+	proto_config_add_string "vendorid"
+	proto_config_add_boolean "broadcast"
+	proto_config_add_string "reqopts"
+	proto_config_add_string "apn"
+	proto_config_add_string "username"
+	proto_config_add_string "password"
+	proto_config_add_boolean "lte_apn_use"
+	proto_config_add_string "lte_apn"
+	proto_config_add_string "lte_username"
+	proto_config_add_string "lte_password"
+	proto_config_add_string "pincode"
+	proto_config_add_string "technology"
+	proto_config_add_string "auto"
+}
+
+proto_4g_setup() {
+	local config="$1"
+	local iface="$2"
+
+        local ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+        json_get_vars ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+
+        local opt dhcpopts
+        for opt in $reqopts; do
+                append dhcpopts "-O $opt"
+        done
+
+        for opt in $sendopts; do
+                append dhcpopts "-x $opt"
+        done
+
+        [ "$broadcast" = 1 ] && broadcast="-B" || broadcast=
+        [ -n "$clientid" ] && clientid="-x 0x3d:${clientid//:/}" || clientid="-C"
+        [ -n "$iface6rd" ] && proto_export "IFACE6RD=$iface6rd"
+        [ "$iface6rd" != 0 -a -f /lib/netifd/proto/6rd.sh ] && append dhcpopts "-O 212"
+        [ -n "$zone6rd" ] && proto_export "ZONE6RD=$zone6rd"
+        [ -n "$zone" ] && proto_export "ZONE=$zone"
+        [ "$delegate" = "0" ] && proto_export "IFACE6RD_DELEGATE=0"
+
+        json_get_var comdev comdev
+        json_get_var apn apn
+        json_get_var service service
+        json_get_var pincode pincode
+
+
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			[ -n "$pincode" ] && {
+				if ! mbimcli -d $comdev --query-pin-state 2>&1 | grep -q "unlocked"; then
+					set -o pipefail
+					if ! mbimcli -d $comdev --enter-pin="${pincode}" 2>&1; then
+						mbimcli -d $comdev --query-pin-state
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" mbim-network $comdev start
+		;;
+		ncm)
+			[ -n "$pincode" ] && echo $pincode | gcom -d $comdev
+			USE_APN="$apn" gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			[ -n "$pincode" ] && {
+				if ! qmicli -d $comdev --dms-uim-get-pin-status 2>&1 | grep -q "enabled-verified\|disabled" >/dev/null; then
+					set -o pipefail
+					if ! qmicli -d $comdev --dms-uim-verify-pin="PIN,${pincode}" 2>&1; then
+						qmicli -d $comdev --dms-uim-get-pin-status
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" qmi-network $comdev start
+		;;		
+	esac
+	
+	proto_export "INTERFACE=$config"
+	proto_run_command "$config" udhcpc -R \
+		-p /var/run/udhcpc-$iface.pid \
+		-s /lib/netifd/dhcp.script \
+		-f -t 0 -i "$iface" \
+		${ipaddr:+-r $ipaddr} \
+		${hostname:+-H $hostname} \
+		${vendorid:+-V $vendorid} \
+		$clientid $broadcast $dhcpopts
+}
+
+proto_4g_teardown() {
+	local interface="$1"
+	local iface="$2"
+	local modem service comdev
+
+        config_load network
+        config_get service $interface service
+        config_get comdev $interface comdev
+
+#	config_get modem $interface modem
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			mbim-network $comdev stop
+		;;
+		ncm)
+			USE_DISCONNECT=1 gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			qmi-network $comdev stop
+		;;		
+	esac
+	proto_kill_command "$interface"
+}
+
+add_protocol 4g
--- a/asterisk-1.8.x-mod/Makefile
+++ b/asterisk-1.8.x-mod/Makefile
@@ -0,0 +1,802 @@
+#
+# Copyright (C) 2008-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=asterisk18-mod
+PKG_VERSION:=1.8.10.1
+
+PKG_SOURCE_VERSION:=015d279241d0ac5d8c1321aa6f78b9ae551575d1
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
+
+PKG_RELEASE:=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+-include $(INCLUDE_DIR)/ltqtapi.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Package/asterisk18-mod/Default
+  SUBMENU:=Telephony
+  SECTION:=net
+  CATEGORY:=Network
+  URL:=http://www.asterisk.org/
+endef
+
+define Package/asterisk18-mod/Default/description
+ Asterisk is a complete PBX in software. It provides all of the features
+ you would expect from a PBX and more. Asterisk does voice over IP in three
+ protocols, and can interoperate with almost all standards-based telephony
+ equipment using relatively inexpensive hardware.
+endef
+
+
+define Package/asterisk18-mod
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Complete open source PBX, v1.8x
+  MENU:=1
+  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen +libopenssl +libncurses +libpopt +libpthread +uci +ubus +zlib @!TARGET_avr32
+endef
+
+define Package/asterisk18-mod/description
+$(call Package/asterisk18-mod/Default/description)
+endef
+
+define Package/asterisk18-mod-sounds
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Sound files
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-sounds/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains sound files for Asterisk.
+endef
+
+define Package/asterisk18-mod-voicemail
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voicemail support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-voicemail/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains voicemail related modules for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-transfer
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Call transfer support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-transfer/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the call transfer support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-softhangup
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SoftHangup application
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-softhangup/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the SoftHangup support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-meetme
+$(call Package/asterisk18-mod/Default)
+  TITLE:=conferencing support
+  DEPENDS:= asterisk18-mod +dahdi-tools-libtonezone +dahdi
+endef
+
+define Package/asterisk18-mod-app-meetme/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the MeetMe application driver Conferencing support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-iax2
+$(call Package/asterisk18-mod/Default)
+  TITLE:=IAX support
+  DEPENDS:= asterisk18-mod +asterisk18-res-crypto
+endef
+
+define Package/asterisk18-mod-chan-iax2/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides IAX support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-cdr
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CDR support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-cdr/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Call Detail Record support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-musiconhold
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MOH support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-musiconhold/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Music On Hold support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-voice
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voice client/pbx support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-voice/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Voice Client/pbx support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-srtp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SRTP support
+  DEPENDS:= asterisk18-mod libsrtp +asterisk18-mod-res-crypto
+endef
+
+define Package/asterisk18-mod-res-srtp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides SRTP support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-stun
+$(call Package/asterisk18-mod/Default)
+  TITLE:=STUN support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-queue
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Queue support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-gtalk
+$(call Package/asterisk18-mod/Default)
+  TITLE:=GTalk support
+  DEPENDS:= asterisk18-mod +libiksemel
+endef
+
+define Package/asterisk18-mod-chan-gtalk/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_gtalk and res_jabber for GTalk
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-mobile
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Mobile channel support
+  DEPENDS:= asterisk18-mod +bluez-libs
+endef
+
+define Package/asterisk18-mod-chan-mobile/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mobile support to Asterisk.
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd
+$(call Package/asterisk18-mod/Default)
+  TITLE:= Timerfd Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-timing-pthread
+$(call Package/asterisk18-mod/Default)
+  TITLE:= pthread Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-fax
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Generic FAX Resource for FAX technology resource modules
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-timing-pthread
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Spandsp T.38 and G.711 FAX Resource
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-fax +libspandsp
+endef
+
+define Package/asterisk18-mod-chan-mgcp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MGCP channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-mgcp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mgcp support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-skinny
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Skinny channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-skinny/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_skinny support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-brcm
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Broadcom channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-brcm/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_brcm support to Asterisk.
+endef
+
+define Package/asterisk18-mod-curl
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CURL support
+  DEPENDS:= asterisk18-mod +libcurl
+endef
+
+define Package/asterisk18-mod-curl/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides CURL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-mysql
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MySQL support
+  DEPENDS:= asterisk18-mod +PACKAGE_asterisk18-mysql:libmysqlclient
+endef
+
+define Package/asterisk18-mod-mysql/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides MySQL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-lantiq
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Lantiq TAPI support
+  DEPENDS:= asterisk18-mod $(LTQ_TAPI_DEPENDS)
+  URL:=http://git.nanl.de/?p=asterisk_channel_lantiq.git
+  MAINTAINER:=Mirko Vogt <mirko@openwrt.org>
+endef
+
+define Package/asterisk18-mod-chan-lantiq/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_lantiq support to Asterisk.
+endef
+
+CONFIGURE_ARGS+= \
+	--without-inotify
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-app-meetme),)
+  CONFIGURE_ARGS+= \
+	--with-dahdi="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-dahdi
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-gtalk),)
+  CONFIGURE_ARGS+= \
+	--with-gnutls="$(STAGING_DIR)/usr" \
+	--with-iksemel="$(STAGING_DIR)/usr"
+  SITE_VARS+= \
+	ac_cv_lib_iksemel_iks_start_sasl=yes \
+	ac_cv_lib_gnutls_gnutls_bye=yes
+else
+  CONFIGURE_ARGS+= \
+	--without-gnutls \
+	--without-iksemel
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-curl),)
+  CONFIGURE_ARGS+= \
+	--with-curl="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-curl
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-mysql),)
+  CONFIGURE_ARGS+= \
+	--with-mysqlclient="$(STAGING_DIR)/usr/bin"
+else
+  CONFIGURE_ARGS+= \
+	--without-mysqlclient
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-fax-spandsp),)
+  CONFIGURE_ARGS+= \
+    --with-spandsp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+    --without-spandsp
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-mobile),)
+  CONFIGURE_ARGS+= \
+	--with-bluetooth="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-bluetooth
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
+  CONFIGURE_ARGS+= \
+	--with-srtp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-srtp
+endif
+
+ifeq ($(CONFIG_TARGET_IBOARDID),"D301")
+  EXTRA_CFLAGS += -DNTR_SUPPORT
+endif
+
+CONFIGURE_ARGS+= \
+	--without-curses \
+	--with-gsm=internal \
+	--without-cap \
+	--without-gtk \
+	--without-gtk2 \
+	--without-isdnnet \
+	--without-kde \
+	--without-misdn \
+	--without-nbs \
+	--with-ncurses="$(STAGING_DIR)/usr" \
+	--without-netsnmp \
+	--without-newt \
+	--without-odbc \
+	--without-ogg \
+	--without-osptk \
+	--with-popt="$(STAGING_DIR)/usr" \
+	--without-pri \
+	--without-qt \
+	--without-radius \
+	--without-sdl \
+	--without-suppserv \
+	--without-tds \
+	--without-termcap \
+	--without-tinfo \
+	--without-vorbis \
+	--without-vpb \
+	--with-z="$(STAGING_DIR)/usr" \
+	--with-sounds-cache="$(DL_DIR)" \
+	--disable-xmldoc
+
+# I've had strange errors with -fno-caller-saves
+# in global CFLAGS so revert it. /Ronny
+EXTRA_CFLAGS+= -O2 -fcaller-saves
+EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
+EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)
+
+
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+ifneq ($(CONFIG_TARGET_lantiq),)
+	$(CP) ./src-lantiq/* $(PKG_BUILD_DIR)/
+endif
+endef
+
+define Build/Configure
+	-rm $(PKG_BUILD_DIR)/menuselect.makeopts
+	$(call Build/Configure/Default,,$(SITE_VARS))
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		include/asterisk/version.h \
+		include/asterisk/buildopts.h defaults.h \
+		makeopts.embed_rules
+	ASTCFLAGS="$(EXTRA_CFLAGS) -DLOW_MEMORY" \
+	ASTLDFLAGS="$(EXTRA_LDFLAGS)" \
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		ASTVARLIBDIR="/usr/lib/asterisk" \
+		ASTDATADIR="/usr/lib/asterisk" \
+		ASTKEYDIR="/usr/lib/asterisk" \
+		ASTDBDIR="/usr/lib/asterisk" \
+		NOISY_BUILD="1" \
+		DEBUG="" \
+		OPTIMIZE="" \
+		DESTDIR="$(PKG_INSTALL_DIR)" \
+		all install samples
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk/*.h $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk.h $(1)/usr/include/asterisk-1.8/include/
+endef
+
+define Package/asterisk18-mod/conffiles
+/etc/asterisk/asterisk.conf
+/etc/asterisk/modules.conf
+/etc/asterisk/extensions.conf
+/etc/asterisk/sip.conf
+/etc/asterisk/sip_notify.conf
+/etc/asterisk/features.conf
+/etc/asterisk/indications.conf
+/etc/asterisk/logger.conf
+/etc/asterisk/manager.conf
+/etc/asterisk/rtp.conf
+/etc/default/asterisk
+/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod/install
+	$(INSTALL_DIR) $(1)/etc/asterisk/ssl
+	for f in asterisk extensions features \
+		indications logger manager modules \
+		sip sip_notify rtp; do \
+		$(CP) $(PKG_INSTALL_DIR)/etc/asterisk/$$$$f.conf $(1)/etc/asterisk/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	for f in app_dial app_echo app_playback app_macro \
+		chan_sip res_rtp_asterisk res_rtp_multicast \
+		codec_ulaw codec_gsm \
+		format_gsm format_pcm format_wav format_wav_gsm \
+		pbx_config \
+		func_strings func_timeout func_callerid func_logic; do \
+		$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$$$$f.so $(1)/usr/lib/asterisk/modules/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/asterisk $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/default
+	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod-sounds/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/* $(1)/usr/lib/asterisk/sounds/
+	rm -f $(1)/usr/lib/asterisk/sounds/vm-*
+	rm -f $(1)/usr/lib/asterisk/sounds/conf-*
+endef
+
+
+define Package/asterisk18-mod-voicemail/conffiles
+/etc/asterisk/voicemail.conf
+endef
+
+define Package/asterisk18-mod-voicemail/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/voicemail.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*voicemail.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_adsi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_smdi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/vm-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-app-meetme/conffiles
+/etc/asterisk/meetme.conf
+endef
+
+define Package/asterisk18-mod-app-meetme/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/meetme.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_meetme.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/conf-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-chan-iax2/conffiles
+/etc/asterisk/iax.conf
+/etc/asterisk/iaxprov.conf
+endef
+
+define Package/asterisk18-mod-cdr/conffiles
+/etc/asterisk/cdr.conf
+/etc/asterisk/cdr_custom.conf
+/etc/asterisk/cdr_manager.conf
+/etc/asterisk/cdr_odbc.conf
+/etc/asterisk/cdr_pgsql.conf
+/etc/asterisk/cdr_tds.conf
+endef
+
+define Package/asterisk18-mod-res-musiconhold/conffiles
+/etc/asterisk/musiconhold.conf
+endef
+
+define Package/asterisk18-mod-chan-iax2/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iax.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iaxprov.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_iax2.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-cdr/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr*.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*cdr*.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-musiconhold/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/musiconhold.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_musiconhold.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-voice/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_voice.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-gtalk/conffiles
+/etc/asterisk/gtalk.conf
+/etc/asterisk/jabber.conf
+endef
+
+define Package/asterisk18-mod-chan-gtalk/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/gtalk.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/jabber.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_gtalk.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-mobile/conffiles
+/etc/asterisk/chan_mobile.conf
+endef
+
+define Package/asterisk18-mod-chan-mobile/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/chan_mobile.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mobile.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-pthread/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_pthread.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax/conffiles
+/etc/asterisk/res_fax.conf
+endef
+
+define Package/asterisk18-mod-res-fax/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_fax.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax_spandsp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-mgcp/conffiles
+/etc/asterisk/mgcp.conf
+endef
+
+define Package/asterisk18-mod-chan-mgcp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/mgcp.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mgcp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-skinny/conffiles
+/etc/asterisk/skinny.conf
+endef
+
+define Package/asterisk18-mod-chan-skinny/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/skinny.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_skinny.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-brcm/conffiles
+/etc/asterisk/brcm.conf
+endef
+
+define Package/asterisk18-mod-chan-brcm/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/brcm.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_brcm.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-curl/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/func_curl.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_curl.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-transfer/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_transfer.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-softhangup/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_softhangup.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-mysql/conffiles
+/etc/asterisk/app_mysql.conf
+/etc/asterisk/res_config_mysql.conf
+/etc/asterisk/cdr_mysql.conf
+endef
+
+define Package/asterisk18-mod-mysql/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/app_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_config_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/cdr_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_config_mysql.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-lantiq/conffiles
+/etc/asterisk/lantiq.conf
+endef
+
+define Package/asterisk18-mod-chan-lantiq/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/lantiq.conf $(1)/etc/asterisk/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_lantiq.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-srtp/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_srtp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-stun/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_stun_monitor.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-queue/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_queue.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Buildasterisk18-modModuleTemplate
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))
+  $$(call Package/asterisk18-mod/Default)
+    TITLE:=$(2) support
+    DEPENDS:= asterisk18-mod $(4)
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/description
+  $$(call Package/asterisk18-mod/Default/description)
+    This package provides support $(3) in Asterisk.
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/install
+	$(INSTALL_DIR) $$(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$(1).so $$(1)/usr/lib/asterisk/modules/
+  endef
+
+  $$(eval $$(call BuildPackage,asterisk18-mod-$(subst _,-,$(1))))
+endef
+
+$(eval $(call BuildPackage,asterisk18-mod))
+$(eval $(call BuildPackage,asterisk18-mod-voicemail))
+$(eval $(call BuildPackage,asterisk18-mod-sounds))
+$(eval $(call BuildPackage,asterisk18-mod-app-meetme))
+$(eval $(call BuildPackage,asterisk18-mod-app-transfer))
+$(eval $(call BuildPackage,asterisk18-mod-app-softhangup))
+$(eval $(call BuildPackage,asterisk18-mod-chan-iax2))
+$(eval $(call BuildPackage,asterisk18-mod-cdr))
+$(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
+$(eval $(call BuildPackage,asterisk18-mod-res-voice))
+$(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mobile))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-pthread))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mgcp))
+$(eval $(call BuildPackage,asterisk18-mod-chan-skinny))
+$(eval $(call BuildPackage,asterisk18-mod-chan-brcm))
+$(eval $(call BuildPackage,asterisk18-mod-curl))
+$(eval $(call BuildPackage,asterisk18-mod-mysql))
+$(eval $(call BuildPackage,asterisk18-mod-chan-lantiq))
+$(eval $(call BuildPackage,asterisk18-mod-res-srtp))
+$(eval $(call BuildPackage,asterisk18-mod-res-stun))
+$(eval $(call BuildPackage,asterisk18-mod-app-queue))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_authenticate,Authenticate,support for executing arbitrary authenticate commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanisavail,Channel availability check,support for checking if a channel is available))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanspy,Channel listen in,support for listening in on any channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_directed_pickup,Directed call pickup,support for directed call pickup))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_exec,Exec application,support for application execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_minivm,Minimal voicemail system,a voicemail system in small building blocks working together based on the Comedian Mail voicemail system))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_readexten,Extension to variable,a trivial application to read an extension into a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_read,Variable read,a trivial application to read a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sayunixtime,Say Unix time,an application to say Unix time))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sms,SMS,SMS support (ETSI ES 201 912 protocol 1)))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_stack,Stack applications, stack applications Gosub Return etc., +asterisk18-res-agi))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_system,System exec,support for executing system commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_talkdetect,File playback with audio detect,for file playback with audio detect))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_waituntil,Sleep,support sleeping until the given epoch))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_while,While loop,a while loop implementation))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_agent,Agents proxy channel, an implementation of agents proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_local,Local proxy channel, an implementation of local proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_alaw,Signed linear to alaw translation,translation between signed linear and alaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ulaw,Signed linear to ulaw translation,translation between signed linear and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_a_mu,Alaw to ulaw translation,translation between alaw and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g722,G.722,a high bit rate 48/56/64Kbps ITU standard codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g726,Signed linear to G.726 translation,translation between signed linear and ITU G.726-32kbps codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ilbc,iLBC,internet Low Bitrate Codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_gsm,GSM,GSM codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g726,G.726,support for headerless G.726 16/24/32/40kbps data format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g729,G.729,support for raw headerless G729 data))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln,Raw slinear format,support for raw slinear format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln16,Raw slinear 16 format,support for Raw slinear 16 format))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_db,Database interaction,functions for interaction with the database))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_devstate,Blinky lights control,functions for manually controlled blinky lights))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_vmcount,vmcount dialplan,a vmcount dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_extstate,Hinted extension state,retrieving the state of a hinted extension for dialplan control))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_global,Global variable,global variable dialplan functions))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_shell,Shell,support for shell execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_ael,Asterisk Extension Logic,support for symbolic Asterisk Extension Logic))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_ael_share,Shareable AEL code,support for shareable AEL code mainly between internal and external modules))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_spool,Call Spool,outgoing call spool support))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_agi,Asterisk Gateway Interface,support for the Asterisk Gateway Interface extension))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_crypto,Provide Crypto,Cryptographic Signature capability))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_alarmreceiver,Alarm receiver,Central Station Alarm receiver for Ademco Contact ID))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_setcallerid,Set callerid,support for setting callerid))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_verbose,Verbose logging,Verbose logging application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_channel,Channel info,Channel info dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_blacklist,Blacklist on callerid,looking up the callerid number and see if it is blacklisted))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_originate,Originate a call,originating an outbound call and connecting it to a specified extension or application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_uri,URI encoding and decoding,Encodes and decodes URI-safe strings))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_disa,Direct Inward System Access,Direct Inward System Access))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_senddtmf,Send DTMF digits,Sends arbitrary DTMF digits))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_cut,CUT function,CUT function))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_clioriginate,Calls via CLI,Originate calls via the CLI))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_mixmonitor,Record a call and mix the audio,record a call and mix the audio during the recording))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_playtones,Playtones application,play a tone list))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_record,Record sound file,to record a sound file))
--- a/asterisk-1.8.x-mod/files/asterisk.default
+++ b/asterisk-1.8.x-mod/files/asterisk.default
@@ -0,0 +1,4 @@
+## startup options for /etc/init.d/asterisk
+
+ENABLE_ASTERISK="yes"
+OPTIONS=""
--- a/asterisk-1.8.x-mod/files/asterisk.init
+++ b/asterisk-1.8.x-mod/files/asterisk.init
@@ -0,0 +1,57 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+STOP=10
+
+USE_PROCD=1
+NAME=asterisk
+PROG=/usr/sbin/asterisk
+DEFAULT=/etc/default/asterisk
+
+init_asterisk() {
+	# do not start asterisk until the
+	# router receives a default route
+	while ! ip r | grep -q default; do
+		sleep 1
+	done
+
+	[ -f $DEFAULT ] && . $DEFAULT
+	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
+	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
+        [ -d /var/spool/asterisk ] || mkdir -p /var/spool/asterisk
+
+        # does the board have a fxs relay?
+        local fxsRelayGpio=$(db -q get hw.board.fxsRelayGpio)
+        if [ "$fxsRelayGpio" != "" ]; then
+                /sbin/brcm_fw_tool set -x $fxsRelayGpio -p 1
+        fi
+}
+
+service_triggers() {
+        procd_add_reload_trigger voice_client
+}
+
+start_service() {
+	init_asterisk
+
+	procd_open_instance
+	procd_set_param command "$PROG" -f
+	procd_set_param respawn
+	procd_close_instance
+#	service_start /usr/sbin/asterisk
+}
+
+reload_service() {
+	asterisk -rx "core reload"
+	asterisk -rx "dialplan reload"
+	asterisk -rx "brcm reload"
+}
+
+restart() {
+	reload
+}
+
+stop_service() {
+        service_stop /usr/sbin/asterisk
+}
+
--- a/ated/Makefile
+++ b/ated/Makefile
@@ -1,77 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
-#
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))
--- a/bashdb/Makefile
+++ b/bashdb/Makefile
@@ -1,65 +0,0 @@
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bashdb
-PKG_VERSION:=4.4-0.92
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-#PKG_SOURCE_URL:=http://sourceforge.net/projects/bashdb/files/bashdb/$(PKG_VERSION)
-PKG_SOURCE_URL:=@SF/bashdb/
-PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
-#PKG_CAT:=zcat
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Bash script debugging utility.
-  URL:=http://sourceforge.net/projects/bashdb/
-endef
-
-define Package/$(PKG_NAME)/description
-  Bash script debugging utility.
-endef
-
-define Build/Compile
-        $(MAKE) -C $(PKG_BUILD_DIR) \
-                $(TARGET_CONFIGURE_OPTS) \
-                CFLAGS="$(TARGET_CFLAGS) -DLINUX $(TARGET_CPPFLAGS) \
-                        -I./src" \
-                LIBS="$(TARGET_LDFLAGS)" \
-                DESTDIR="$(PKG_INSTALL_DIR)"
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bashdb $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/share
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.sh  $(1)/usr/share/$(PKG_NAME)/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.inc  $(1)/usr/share/$(PKG_NAME)/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/init
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/init/*.sh  $(1)/usr/share/$(PKG_NAME)/init/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/show_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/set_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/info_sub
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/*.sh $(1)/usr/share/$(PKG_NAME)/command/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/show_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/show_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/set_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/set_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/info_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/info_sub/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/*.sh $(1)/usr/share/$(PKG_NAME)/lib/
-endef
-
-$(eval $(call BuildPackage,bashdb))
--- a/bbf/Config_bbfdm.in
+++ b/bbf/Config_bbfdm.in
@@ -1,27 +0,0 @@
-if PACKAGE_libbbfdm
-
-config LIBBBFDM_VENDOR_PREFIX
-    string "Vendor Prefix"
-    default "X_IOPSYS_EU_"
-
-config BBF_TR181
-	bool "Compile with tr181 device features"
-	default y
-
-config BBF_TR104
-	bool "Compile with tr104 voice features"
-	default y
-
-config BBF_TR143
-	bool "Compile with tr143 diagnostics features"
-	default y
-
-config BBF_TR157
-	bool "Compile with tr157 bulkdata collector features"
-	default y
-	
-config BBF_TR064
-	bool "Compile with tr064 features"
-	default n
-
-endif
--- a/bbf/Makefile
+++ b/bbf/Makefile
@@ -1,96 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libbbfdm
-PKG_VERSION:=1.0-2019-12-28
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=87df7048821fb8a6dcd35f0959f97aa08688f53b
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=LGPL-2.1
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libbbfdm
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbfdm/description
- Test description will update later.
-endef
-
-USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
-ifneq ($(USE_LOCAL),)
-define Build/Prepare
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBBBFDM_VENDOR_PREFIX)\\\"
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE -D_AADJ
-
-ifeq ($(CONFIG_BBF_TR181),y)
-CONFIGURE_ARGS += \
-	--enable-tr181
-endif
-
-ifeq ($(CONFIG_BBF_TR104),y)
-CONFIGURE_ARGS += \
-	--enable-tr104
-endif
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CONFIGURE_ARGS += \
-	--enable-tr143
-endif
-
-ifeq ($(CONFIG_BBF_TR157),y)
-CONFIGURE_ARGS += \
-	--enable-tr157
-endif
-
-ifeq ($(CONFIG_BBF_TR064),y)
-CONFIGURE_ARGS += \
-	--enable-tr064
-endif
-
-define Package/libbbfdm/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/bbfdm
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(CP) $(PKG_BUILD_DIR)/dmtree/tr181/*.h $(1)/usr/include/libbbfdm/
-	$(CP) $(PKG_BUILD_DIR)/dmtree/tr157/*.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libbbfdm))
--- a/bbfdetest/Makefile
+++ b/bbfdetest/Makefile
@@ -1,39 +0,0 @@
-#
-# Copyright (C) 2020 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbfdetest
-PKG_VERSION:=1.0.0
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bbfdetest
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Library for example shared libraries
-  DEPENDS:=+libubox +ubus +libbbf_api
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
-
-define Build/Prepare
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Package/bbfdetest/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdetest.init $(1)/etc/init.d/bbfdetest
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdetest $(1)/usr/sbin/bbfdetest
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
-endef
-
-$(eval $(call BuildPackage,bbfdetest))
-
--- a/bbfdetest/src/Makefile
+++ b/bbfdetest/src/Makefile
@@ -1,25 +0,0 @@
-PROG = bbfdetest
-LIB = libbbfdetest.so
-
-PROG_OBJS = bbfdetest.o
-LIB_OBJS = libbbfdetest.o
-
-PROG_CFLAGS = $(CFLAGS) -fstrict-aliasing
-PROG_LDFLAGS = $(LDFLAGS) -lubus -lubox
-LIB_LDFLAGS = $(LDFLAGS) -lbbf_api
-
-.PHONY: all
-
-%.o: %.c
-	$(CC) $(PROG_CFLAGS) $(FPIC) -c -o $@ $<
-
-all: $(PROG) $(LIB)
-
-$(PROG): $(PROG_OBJS)
-	$(CC) $(PROG_LDFLAGS) -o $@ $^
-
-$(LIB): $(LIB_OBJS)
-	$(CC) $(PROG_CFLAGS) $(LIB_LDFLAGS) -shared -o $@ $^
-
-clean:
-	rm -f *.o $(PROG) $(LIB)
--- a/bbfdetest/src/bbfdetest.c
+++ b/bbfdetest/src/bbfdetest.c
@@ -1,185 +0,0 @@
-/*
- * Copyright (C) 2020 iopsys Software Solutions AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 2.1
- * as published by the Free Software Foundation
- *
- *	Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
- */
- 
-#include <stdio.h>
-#include <unistd.h>
-#include <libubox/blobmsg.h>
-#include <libubox/uloop.h>
-#include <libubus.h>
-
-typedef struct SupportedDataModel
-{
-	char url[128];
-	char urn[128];
-	char features[128];
-} Supported_DataModel;
-
-struct SupportedDataModel DataModel[] = {
-{"http://www.broadband-forum.org/cwmp/tr-181-2-13-0.xml","urn:broadband-forum-org:tr-181-2-13-0","Router,Wireless,Firewall,NAT,IPv4,IPv6"},
-{"http://www.broadband-forum.org/cwmp/tr-104-1-1-0.xml","urn:broadband-forum-org:tr-104-1-1-0", "VoiceService"},
-{"http://www.broadband-forum.org/cwmp/tr-143-1-1-0.xml","urn:broadband-forum-org:tr-143-1-1-0", "Ping,TraceRoute,Download,Upload,UDPecho,ServerSelectionDiag"},
-{"http://www.broadband-forum.org/cwmp/tr-157-1-3-0.xml","urn:broadband-forum-org:tr-157-1-3-0", "Bulkdata,SoftwareModules"},
-};
-
-void remove_new_line(char *buf)
-{
-	int len;
-	len = strlen(buf) - 1;
-	if (buf[len] == '\n')
-		buf[len] = 0;
-}
-
-static int device_info(struct ubus_context *ctx, struct ubus_object *obj,
-					   struct ubus_request_data *req, const char *method,
-					   struct blob_attr *msg)
-{
-	void *a, *t;
-	struct blob_buf bb;
-	char line[256];
-	char *p;
-
-	memset(&bb,0,sizeof(struct blob_buf));
-	blob_buf_init(&bb, 0);
-
-	FILE* fs = fopen( "/proc/cpuinfo" , "r");
-	if (fs) {
-		a = blobmsg_open_array(&bb, "processor");
-		while (fgets(line, 256, fs)) {
-			remove_new_line(line);
-			strtok_r(line, ":", &p);
-			if (strcasestr(line, "processor")) {
-				t = blobmsg_open_table(&bb, "");
-				blobmsg_add_u32(&bb, "number", atoi(p+1));
-			}
-			if (strcasestr(line, "model")) {
-				blobmsg_add_string(&bb, "model", p+1);
-				blobmsg_close_table(&bb, t);
-			}
-		}
-		fclose(fs);
-		blobmsg_close_array(&bb, a);
-	}
-
-	a = blobmsg_open_array(&bb, "dataModel");
-	for (int i = 0; i < sizeof(DataModel)/sizeof(struct SupportedDataModel); i++) {
-		t = blobmsg_open_table(&bb, "");
-		blobmsg_add_string(&bb, "url", DataModel[i].url);
-		blobmsg_add_string(&bb, "urn", DataModel[i].urn);
-		blobmsg_add_string(&bb, "features", DataModel[i].features);
-		blobmsg_close_table(&bb, t);
-	}
-	blobmsg_close_array(&bb, a);
-
-	ubus_send_reply(ctx, req, bb.head);
-	blob_buf_free(&bb);
-	return 0;
-}
-
-enum {
-	PING_HOST,
-	__PING_MAX
-};
-
-static const struct blobmsg_policy ping_policy[__PING_MAX] = {
-	[PING_HOST]     = { .name = "host",     .type = BLOBMSG_TYPE_STRING },
-};
-
-static int device_ping(struct ubus_context *ctx, struct ubus_object *obj,
-						struct ubus_request_data *req, const char *method,
-						struct blob_attr *msg)
-{
-	struct blob_attr *tb[__PING_MAX] = {NULL};
-	char *p, *min, *avg, *max, line[512], command[512];
-	struct blob_buf bb;
-	FILE *log;
-	int host_ping = 0;
-
-	if(blobmsg_parse(ping_policy, __PING_MAX, tb, blob_data(msg), blob_len(msg)))
-		return UBUS_STATUS_UNKNOWN_ERROR;
-
-	if (!tb[PING_HOST])
-		return UBUS_STATUS_INVALID_ARGUMENT;
-
-	snprintf(command, sizeof(command), "ping -c 1 -W 1 %s", blobmsg_get_string(tb[PING_HOST]));
-
-	memset(&bb,0,sizeof(struct blob_buf));
-	blob_buf_init(&bb, 0);
-
-	if ((log = popen(command, "r"))) {
-		while (fgets(line, sizeof(line), log) != NULL) {
-			if (strstr(line, "round-trip")) {
-				host_ping = 1;
-				blobmsg_add_u8(&bb,"status", true);
-				strtok_r(line, "=", &min);
-				strtok_r(min+1, "/", &avg);
-				blobmsg_add_string(&bb, "min", min+1);
-				strtok_r(avg, "/", &max);
-				blobmsg_add_string(&bb, "avg", avg);
-				strtok_r(max, " ", &p);
-				blobmsg_add_string(&bb, "max", max);
-				break;
-			}
-		}
-		pclose(log);
-	}
-
-	if (!host_ping)
-		blobmsg_add_u8(&bb,"status", false);
-
-	ubus_send_reply(ctx, req, bb.head);
-	blob_buf_free(&bb);
-	return 0;
-}
-
-static struct ubus_method device_object_methods[] = {
-	UBUS_METHOD_NOARG("info", device_info),
-	UBUS_METHOD("ping", device_ping, ping_policy),
-};
-
-static struct ubus_object_type device_object_type = UBUS_OBJECT_TYPE("device", device_object_methods);
-
-static struct ubus_object device_object = {
-	.name = "device",
-	.type = &device_object_type,
-	.methods = device_object_methods,
-	.n_methods = ARRAY_SIZE(device_object_methods),
-};
-
-static void device_init(struct ubus_context *ctx)
-{
-	int ret;
-
-	ret = ubus_add_object(ctx, &device_object);
-	if (ret)
-		fprintf(stderr, "Failed to publish '%s' object : %s\n", device_object.name, ubus_strerror(ret));
-
-	uloop_run();
-}
-
-int main(void)
-{
-	const char *ubus_socket = NULL;
-	struct ubus_context *ctx = NULL;
-
-	uloop_init();
-	ctx = ubus_connect(ubus_socket);
-	if (!ctx) {
-		fprintf(stderr, "Failed to connect to ubus\n");
-		return -1;
-	}
-	ubus_add_uloop(ctx);
-	device_init(ctx);
-	uloop_run();
-	ubus_free(ctx);
-	if (ctx) ubus_free(ctx);
-	uloop_done();
-
-	return 0;
-}
--- a/bbfdetest/src/bbfdetest.init
+++ b/bbfdetest/src/bbfdetest.init
@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=94
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/bbfdetest
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
--- a/bbfdetest/src/libbbfdetest.c
+++ b/bbfdetest/src/libbbfdetest.c
@@ -1,292 +0,0 @@
-/*
- * Copyright (C) 2020 iopsys Software Solutions AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 2.1
- * as published by the Free Software Foundation
- *
- *	Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
- */
-
-#include <libbbf_api/dmbbf.h>
-#include <libbbf_api/dmcommon.h>
-#include <libbbf_api/dmuci.h>
-#include <libbbf_api/dmubus.h>
-#include <libbbf_api/dmjson.h>
-#include "libbbfdetest.h"
-
-/* ********** RootDynamicObj ********** */
-LIB_MAP_OBJ tRootDynamicObj[] = {
-/* parentobj, nextobject */
-{"Device.IP.Diagnostics.", tdynamicIPDiagnosticsObj},
-{"Device.DeviceInfo.", tdynamicDeviceInfobj},
-{"Device.", tdynamicDeviceObj},
-{0}
-};
-
-/* ********** RootDynamicOperate ********** */
-LIB_MAP_OPERATE tRootDynamicOperate[] = {
-/* pathname, operation */
-{"Device.X_IOPSYS_EU_PingTEST.Run", dynamicDevicePingOperate},
-{"Device.X_IOPSYS_EU_Reboot", dynamicDeviceRebootOperate},
-{0}
-};
-
-/* *** Device.IP.Diagnostics. *** */
-DMOBJ tdynamicIPDiagnosticsObj[] = {
-/* OBJ, permission, addobj, delobj, checkobj, browseinstobj, forced_inform, notification, nextjsonobj, nextobj, leaf, linker, bbfdm_type*/
-{"X_IOPSYS_EU_PingTest", &DMREAD, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, tdynamicIPDiagnosticsX_IOPSYS_EU_PingTestParams, NULL, BBFDM_BOTH},
-{0}
-};
-
-/* *** Device.IP.Diagnostics.X_IOPSYS_EU_PingTest. *** */
-DMLEAF tdynamicIPDiagnosticsX_IOPSYS_EU_PingTestParams[] = {
-/* PARAM, permission, type, getvalue, setvalue, forced_inform, notification, bbfdm_type*/
-{"DiagnosticsState", &DMWRITE, DMT_STRING, getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState, setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState, NULL, NULL, BBFDM_BOTH},
-{"Host", &DMWRITE, DMT_STRING, getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host, setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host, NULL, NULL, BBFDM_BOTH},
-{"MinimumResponseTime", &DMREAD, DMT_STRING, getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MinimumResponseTime, NULL, NULL, NULL, BBFDM_BOTH},
-{"AverageResponseTime", &DMREAD, DMT_STRING, getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_AverageResponseTime, NULL, NULL, NULL, BBFDM_BOTH},
-{"MaximumResponseTime", &DMREAD, DMT_STRING, getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MaximumResponseTime, NULL, NULL, NULL, BBFDM_BOTH},
-{0}
-};
-
-/* *** Device.DeviceInfo. *** */
-DMOBJ tdynamicDeviceInfobj[] = {
-/* OBJ, permission, addobj, delobj, checkobj, browseinstobj, forced_inform, notification, nextjsonobj, nextobj, leaf, linker, bbfdm_type*/
-{"SupportedDataModel", &DMREAD, NULL, NULL, NULL, browseDeviceInfoSupportedDataModelInst, NULL, NULL, NULL, NULL, tdynamicDeviceInfoSupportedDataModelTestParams, NULL, BBFDM_CWMP},
-{0}
-};
-
-/* *** Device.DeviceInfo.SupportedDataModel.{i}. *** */
-DMLEAF tdynamicDeviceInfoSupportedDataModelTestParams[] = {
-/* PARAM, permission, type, getvalue, setvalue, forced_inform, notification, bbfdm_type*/
-{"URL", &DMREAD, DMT_STRING, getdynamic_DeviceInfoSupportedDataModel_URL, NULL, NULL, NULL, BBFDM_CWMP},
-{"URN", &DMREAD, DMT_STRING, getdynamic_DeviceInfoSupportedDataModel_URN, NULL, NULL, NULL, BBFDM_CWMP},
-{"Features", &DMREAD, DMT_STRING, getdynamic_DeviceInfoSupportedDataModel_Features, NULL, NULL, NULL, BBFDM_CWMP},
-{0}
-};
-
-/* *** Device. *** */
-DMOBJ tdynamicDeviceObj[] = {
-/* OBJ, permission, addobj, delobj, checkobj, browseinstobj, forced_inform, notification, nextjsonobj, nextobj, leaf, linker, bbfdm_type*/
-{"X_IOPSYS_EU_Processor", &DMREAD, NULL, NULL, NULL, browseDeviceX_IOPSYS_EU_ProcessorInst, NULL, NULL, NULL, NULL, tdynamicDeviceX_IOPSYS_EU_ProcessorParams, NULL, BBFDM_BOTH},
-{0}
-};
-
-/* *** Device.X_IOPSYS_EU_Processor.{i}. *** */
-DMLEAF tdynamicDeviceX_IOPSYS_EU_ProcessorParams[] = {
-/* PARAM, permission, type, getvalue, setvalue, forced_inform, notification, bbfdm_type*/
-{"Architecture", &DMREAD, DMT_STRING, getdynamic_DeviceX_IOPSYS_EU_Processor_Architecture, NULL, NULL, NULL, BBFDM_BOTH},
-{0}
-};
-
-
-/*************************************************************
- * ENTRY METHOD
-/*************************************************************/
-int browseDeviceInfoSupportedDataModelInst(struct dmctx *dmctx, DMNODE *parent_node, void *prev_data, char *prev_instance)
-{
-	json_object *res = NULL, *datamodel_obj = NULL, *arrobj = NULL;
-	char *idx, *idx_last = NULL;
-	int id = 0, j = 0;
-
-	dmubus_call("device", "info", UBUS_ARGS{}, 0, &res);
-	if (res) {
-		dmjson_foreach_obj_in_array(res, arrobj, datamodel_obj, j, 1, "dataModel") {
-			idx = handle_update_instance(1, dmctx, &idx_last, update_instance_without_section, 1, ++id);
-			if (DM_LINK_INST_OBJ(dmctx, parent_node, (void *)datamodel_obj, idx) == DM_STOP)
-				break;
-		}
-	}
-	return 0;
-}
-
-int browseDeviceX_IOPSYS_EU_ProcessorInst(struct dmctx *dmctx, DMNODE *parent_node, void *prev_data, char *prev_instance)
-{
-	json_object *res = NULL, *processor_obj = NULL, *arrobj = NULL;
-	char *idx, *idx_last = NULL;
-	int id = 0, j = 0;
-
-	dmubus_call("device", "info", UBUS_ARGS{}, 0, &res);
-	if (res) {
-		dmjson_foreach_obj_in_array(res, arrobj, processor_obj, j, 1, "processor") {
-			idx = handle_update_instance(1, dmctx, &idx_last, update_instance_without_section, 1, ++id);
-			if (DM_LINK_INST_OBJ(dmctx, parent_node, (void *)processor_obj, idx) == DM_STOP)
-				break;
-		}
-	}
-	return 0;
-}
-
-/*************************************************************
- * GET & SET PARAM
-/*************************************************************/
-static int execute_pingtest()
-{
-	json_object *res;
-	char *host, *min, *avg, *max;
-
-	dmuci_get_varstate_string("cwmp", "@pingtest[0]", "Host", &host);
-	if(host && host[0] == '\0')
-		return 0;
-
-	dmubus_call("device", "ping", UBUS_ARGS{{"host", host, String}}, 1, &res);
-	if (res) {
-		dmuci_set_varstate_value("cwmp", "@pingtest[0]", "DiagnosticState", "Complete");
-		min=dmjson_get_value(res, 1, "min");
-		if(min!=NULL && strlen(min)>0)
-			dmuci_set_varstate_value("cwmp", "@pingtest[0]", "Minimum", min);
-		avg=dmjson_get_value(res, 1, "avg");
-		if(avg!=NULL && strlen(avg)>0)
-			dmuci_set_varstate_value("cwmp", "@pingtest[0]", "Average", avg);
-		max=dmjson_get_value(res, 1, "max");
-		if(max!=NULL && strlen(max)>0)
-			dmuci_set_varstate_value("cwmp", "@pingtest[0]", "Maximum", max);
-	}
-	return 0;
-}
-
-static inline char *pingtest_get(char *option, char *def)
-{
-	char *tmp;
-	dmuci_get_varstate_string("cwmp", "@pingtest[0]", option, &tmp);
-	if(tmp && tmp[0] == '\0')
-		return dmstrdup(def);
-	else
-		return tmp;
-}
-
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = pingtest_get("DiagnosticState", "None");
-	return 0;
-}
-
-int setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	char *tmp;
-	struct uci_section *curr_section = NULL;
-
-	switch (action)	{
-		case VALUECHECK:
-			break;
-		case VALUESET:
-			if (strcmp(value, "Requested") == 0) {
-				curr_section = dmuci_walk_state_section("cwmp", "pingtest", NULL, NULL, CMP_SECTION, NULL, NULL, GET_FIRST_SECTION);
-				if(!curr_section)
-				{
-					dmuci_add_state_section("cwmp", "pingtest", &curr_section, &tmp);
-				}
-				dmuci_set_varstate_value("cwmp", "@pingtest[0]", "DiagnosticState", value);
-				execute_pingtest();
-			}
-			break;
-	}
-	return 0;
-}
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = pingtest_get("Host", "");
-	return 0;
-}
-
-int setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	char *tmp;
-	struct uci_section *curr_section = NULL;
-
-	switch (action)	{
-		case VALUECHECK:
-			break;
-		case VALUESET:
-			curr_section = dmuci_walk_state_section("cwmp", "pingtest", NULL, NULL, CMP_SECTION, NULL, NULL, GET_FIRST_SECTION);
-			if(!curr_section)
-			{
-				dmuci_add_state_section("cwmp", "pingtest", &curr_section, &tmp);
-			}
-			dmuci_set_varstate_value("cwmp", "@pingtest[0]", "Host", value);
-			break;
-	}
-	return 0;
-}
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MinimumResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = pingtest_get("Minimum", "0");
-	return 0;
-}
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_AverageResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = pingtest_get("Average", "0");
-	return 0;
-}
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MaximumResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = pingtest_get("Maximum", "0");
-	return 0;
-}
-
-int getdynamic_DeviceInfoSupportedDataModel_URL(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = dmjson_get_value((json_object *)data, 1, "url");
-	return 0;
-}
-
-int getdynamic_DeviceInfoSupportedDataModel_URN(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = dmjson_get_value((json_object *)data, 1, "urn");
-	return 0;
-}
-
-int getdynamic_DeviceInfoSupportedDataModel_Features(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = dmjson_get_value((json_object *)data, 1, "features");
-	return 0;
-}
-
-int getdynamic_DeviceX_IOPSYS_EU_Processor_Architecture(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = dmjson_get_value((json_object *)data, 1, "model");
-	if (strcasestr(*value, "arm"))
-		*value = "arm";
-	else if(strcasestr(*value,"mips"))
-		*value = "mips";
-	return 0;
-}
-
-/*************************************************************
- * OPERATE
-/*************************************************************/
-opr_ret_t dynamicDevicePingOperate(struct dmctx *dmctx, char *path, char *input)
-{
-	json_object *ubus_res = NULL, *json_res = NULL;
-
-	json_res = json_tokener_parse((const char *)input);
-	char *host = dmjson_get_value(json_res, 1, "host");
-	if(host[0] == '\0')
-		return UBUS_INVALID_ARGUMENTS;
-
-	dmubus_call("device", "ping", UBUS_ARGS{{"host", host, String}}, 1, &ubus_res);
-	if (ubus_res) {
-		char *param_min = dmjson_get_value(ubus_res, 1, "min");
-		char *param_avg = dmjson_get_value(ubus_res, 1, "avg");
-		char *param_max = dmjson_get_value(ubus_res, 1, "max");
-
-		add_list_paramameter(dmctx, dmstrdup("MinimumResponseTime"), param_min, "string", NULL, 0);
-		add_list_paramameter(dmctx, dmstrdup("AverageResponseTime"), param_avg, "string", NULL, 0);
-		add_list_paramameter(dmctx, dmstrdup("MaximumResponseTime"), param_max, "string", NULL, 0);
-	}
-	return SUCCESS;
-}
-
-opr_ret_t dynamicDeviceRebootOperate(struct dmctx *dmctx, char *path, char *input)
-{
-	if(0 == dmubus_call_set("system", "reboot", UBUS_ARGS{}, 0))
-		return SUCCESS;
-	else
-		return FAIL;
-}
--- a/bbfdetest/src/libbbfdetest.h
+++ b/bbfdetest/src/libbbfdetest.h
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2020 iopsys Software Solutions AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 2.1
- * as published by the Free Software Foundation
- *
- *	Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
- */
-
-#ifndef __LIBBBFDETEST_H
-#define __LIBBBFDETEST_H
-
-DMOBJ tdynamicIPDiagnosticsObj[];
-DMLEAF tdynamicIPDiagnosticsX_IOPSYS_EU_PingTestParams[];
-DMOBJ tdynamicDeviceInfobj[];
-DMLEAF tdynamicDeviceInfoSupportedDataModelTestParams[];
-DMOBJ tdynamicDeviceObj[];
-DMLEAF tdynamicDeviceX_IOPSYS_EU_ProcessorParams[];
-
-int browseDeviceInfoSupportedDataModelInst(struct dmctx *dmctx, DMNODE *parent_node, void *prev_data, char *prev_instance);
-int browseDeviceX_IOPSYS_EU_ProcessorInst(struct dmctx *dmctx, DMNODE *parent_node, void *prev_data, char *prev_instance);
-
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_DiagnosticsState(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action);
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int setdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_Host(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action);
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MinimumResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_AverageResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_IPDiagnosticsX_IOPSYS_EU_PingTest_MaximumResponseTime(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_DeviceInfoSupportedDataModel_URL(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_DeviceInfoSupportedDataModel_URN(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_DeviceInfoSupportedDataModel_Features(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-int getdynamic_DeviceX_IOPSYS_EU_Processor_Architecture(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value);
-
-opr_ret_t dynamicDevicePingOperate(struct dmctx *dmctx, char *path, char *input);
-opr_ret_t dynamicDeviceRebootOperate(struct dmctx *dmctx, char *path, char *input);
-
-#endif //__LIBBBFDETEST_H
-
--- a/bbk_cli/Makefile
+++ b/bbk_cli/Makefile
@@ -1,42 +0,0 @@
-#
-# Copright (C) 2018 The Internet Foundation In Sweden
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbk_cli
-PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bbk_cli
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +libstdcpp
-	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
-endef
-
-define Package/bbk_cli/description
-	To measure connection speed in an environment that is missing a web browser, 
-	for example, in a server, you can use our command line interface bbk_cli, 
-	which is available for some of the most common operating systems.
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
-endef
-
-define Package/bbk_cli/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
-endef
-
-$(eval $(call BuildPackage,bbk_cli))
--- a/bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch
+++ b/bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch
@@ -1,25 +0,0 @@
-diff --git a/src/framework/engine.h b/src/framework/engine.h
-index 57a48ad..9e1bc36 100644
--- a/src/framework/engine.h
-+++ b/src/framework/engine.h
-@@ -10,6 +10,7 @@
- #include <map>
- #include <vector>
- #include <string>
-+#include <sys/select.h>
- 
- #include "logger.h"
- 
-diff --git a/src/framework/mk.inc b/src/framework/mk.inc
-index 793e211..13275be 100644
--- a/src/framework/mk.inc
-+++ b/src/framework/mk.inc
-@@ -7,7 +7,7 @@ OS:=$(shell uname)
- CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
- 
- ifeq ($(OS),Linux)
-CXX = g++
-+CXX = $(CROSS_COMPILE)g++
- endif
- 
- ifeq ($(OS),Darwin)
--- a/bluez/Makefile
+++ b/bluez/Makefile
@@ -0,0 +1,81 @@
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bluez
+PKG_VERSION:=5.28
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_SOURCE_URL:=http://www.kernel.org/pub/linux/bluetooth
+PKG_MD5SUM:=bc20a8285530758c68f6a60e4ca62a15
+
+PKG_FIXUP:=autoreconf
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/bluez
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libpthread +libusb-compat +glib2 +dbus +libreadline $(INTL_DEPENDS) $(ICONV_DEPENDS) 
+  TITLE:=Bluetooth stack new version 
+  URL:=http://www.bluez.org/
+endef
+
+define Package/bluez/conffiles
+/etc/config/bluetooth
+endef
+
+TARGET_LDFLAGS+= \
+                -Wl,-rpath-link=$(STAGING_DIR)/usr/lib/libiconv-full/lib \
+
+CONFIGURE_ARGS += \
+		--enable-shared \
+		--disable-cups \
+		--enable-debug \
+		--disable-test \
+		--disable-obex \
+		--disable-systemd \
+		--disable-udev \
+		--enable-tools \
+		--enable-experimental \
+		--enable-library \
+		--disable-static \
+
+define Build/Compile
+    $(MAKE) -C $(PKG_BUILD_DIR) \
+        LDFLAGS="$(TARGET_LDFLAGS) \
+            -L$(ICONV_PREFIX)/lib \
+            -L$(INTL_PREFIX)/lib -lm -lncurses" \
+        DESTDIR="$(PKG_INSTALL_DIR)" \
+        all install
+endef
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/bluetooth/*.h $(1)/usr/include/bluetooth
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libbluetooth.* $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/bluez.pc $(1)/usr/lib/pkgconfig/
+endef
+define Package/bluez/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_INSTALL_DIR)/usr/bin/* $(1)/usr/bin/
+
+	$(INSTALL_DIR) $(1)/etc/bluetooth
+	$(INSTALL_DIR) $(1)/etc/dbus-1/system.d
+	$(CP)  $(PKG_INSTALL_DIR)/etc/dbus-1/system.d/bluetooth.conf $(1)/etc/dbus-1/system.d/
+
+	$(INSTALL_DIR) $(1)/usr/lib/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/bluetooth/* $(1)/usr/lib/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libblue* $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,bluez))
--- a/bootchart2/Makefile
+++ b/bootchart2/Makefile
@@ -18,9 +18,6 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk

 define Package/bootchart2
--- a/btle_alarm/Makefile
+++ b/btle_alarm/Makefile
@@ -0,0 +1,47 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=btle_alarm
+PKG_VERSION:=1.0.6
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=b505d7ae1524a213ca3de7f8ee15a7d51c6bbbd5
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/btle_alarm
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/btle_alarm
+  SECTION:=base
+  CATEGORY:=Utilities
+  TITLE:=Ethernet bridging configuration utility
+  #DESCRIPTION:=This variable is obsolete. use the Package/name/description define instead!
+  URL:=http://btle_alarm.sourceforge.net/
+  DEPENDS:=+bluez +libncurses
+endef
+
+define Package/btle_alarm/description
+ Ethernet bridging configuration utility
+ Manage ethernet bridging; a way to connect networks together to
+ form a larger network.
+endef
+
+define Package/btle_alarm/install
+
+	$(CP) ./files/* $(1)/
+
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/btle_alarm $(1)/sbin/
+
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DATA) ./files/btle_alarm.conf $(1)/etc/config/btle_alarm
+
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/etc/init.d/* $(1)/etc/init.d/
+
+endef
+
+$(eval $(call BuildPackage,btle_alarm))
--- a/btle_alarm/files/btle_alarm.conf
+++ b/btle_alarm/files/btle_alarm.conf
@@ -0,0 +1,2 @@
+config info 'Device'
+        option mac 'D0:39:72:B6:23:D6'
--- a/btle_alarm/files/etc/init.d/btle_alarm
+++ b/btle_alarm/files/etc/init.d/btle_alarm
@@ -0,0 +1,29 @@
+#!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+
+START=99
+
+start() {
+        for i in down reset up;do
+            hciconfig hci0 $i
+        done
+        mac=`uci get btle_alarm.Device.mac`
+        if [ $? -eq 0 ];then
+            hcitool lewladd $mac
+        else
+            hcitool lewladd D0:39:72:B6:43:8A
+            hcitool lewladd D0:39:72:B6:18:AA
+        fi
+       sleep 1
+        /sbin/btle_alarm &> /dev/null &
+        echo $! > /tmp/btle_alarm.pid
+}
+
+stop() {
+        hciconfig hci0 down
+        kill -9 `cat /tmp/btle_alarm.pid`
+        rm /tmp/btle_alarm.pid
+        sleep 1
+}
--- a/catv/Makefile
+++ b/catv/Makefile
@@ -1,19 +1,9 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk

 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)

-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk

 define Package/catv
--- a/catv/files/etc/init.d/.catv.kate-swp
+++ b/catv/files/etc/init.d/.catv.kate-swp
--- a/catv/files/etc/init.d/catv
+++ b/catv/files/etc/init.d/catv
@@ -10,16 +10,12 @@ USE_PROCD=1

 start_service() {
 	local enable=0
-	local filter=0
+        local filter=0

-	config_load catv
-	config_get_bool enable catv enable 0
-	config_get filter catv filter
-	if [ $enable -eq 0 ]; then
-		ubus call catv set-enable "{\"enable\":\"off\"}"
-	else
-		ubus call catv set-enable "{\"enable\":\"on\"}"
-	fi
+        config_load catv
+        config_get enable catv enable
+        config_get filter catv filter
+	ubus call catv set-enable "{\"enable\":\"$enable\"}"
 	ubus call catv set-filter "{\"filter\":\"$filter\"}"

 }
--- a/crashlog/Makefile
+++ b/crashlog/Makefile
@@ -1,18 +1,9 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk

 PKG_NAME:=crashlog
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none

 include $(INCLUDE_DIR)/package.mk

--- a/crashlog/files/etc/init.d/crashlog
+++ b/crashlog/files/etc/init.d/crashlog
@@ -6,13 +6,14 @@ send_log()
 {
 	nr=$(db get hw.board.serialNumber)
 	hw=$(db get hw.board.hardware)
-	fam=$(db get hw.board.iopVerFam)
+	hwv=$(db get hw.board.hardwareVersion)
+	bid=$(db get hw.board.boardId)
 	sw=$(db get hw.board.iopVersion)
 	server=$(/sbin/uci get system.crashlog.server)

 	while true
 	do
-	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${bid}_${hwv}_${hw}_${sw}_${nr}
 	    if [ $? == 0 ]
 	    then
 	       break;
--- a/crashlog/files/sbin/logcore
+++ b/crashlog/files/sbin/logcore
@@ -52,9 +52,10 @@ cat >/dev/null

 nr=$(db get hw.board.serialNumber)
 hw=$(db get hw.board.hardware)
-fam=$(hw.board.iopVerFam)
+hwv=$(db get hw.board.hardwareVersion)
+bid=$(db get hw.board.boardId)
 sw=$(db get hw.board.iopVersion)

-scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${bid}_${hwv}_${hw}_${sw}_${nr}
 rm $TMP_CORE

--- a/dectmngr/Makefile
+++ b/dectmngr/Makefile
@@ -0,0 +1,66 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.0.23
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=90aff0da98c626d58201c14c34b3b3a64878ceee
+PKG_NAME:=dectmngr
+
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint test application
+  URL:=
+  DEPENDS:= +libevent2 +libjson +natalie-dect-h bcmkernel
+endef
+
+define Package/dectmngr/description
+	Dect proxy, manager and tools
+endef
+
+
+define Package/dectmngr/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/dect
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+
+	cp $(PKG_BUILD_DIR)/dectmngr $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/atohx $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectproxy $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectdbgd $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectcalib $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect_testmode $(1)/usr/bin/
+	cp files/etc/init.d/* $(1)/etc/init.d/
+	cp files/etc/hotplug.d/dect/* $(1)/etc/hotplug.d/dect/
+	cp files/etc/dect/* $(1)/etc/dect/
+	cp files/etc/config/* $(1)/etc/config/
+	cp files/sbin/dectreg $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dectmngr))
--- a/dectmngr/files/etc/config/dect
+++ b/dectmngr/files/etc/config/dect
@@ -0,0 +1,3 @@
+config dect 'dect'
+	option 'radio' 'auto'
+
--- a/dectmngr/files/etc/dect/dect_testmode.dat
+++ b/dectmngr/files/etc/dect/dect_testmode.dat
--- a/dectmngr/files/etc/dect/nvs_default
+++ b/dectmngr/files/etc/dect/nvs_default
--- a/dectmngr/files/etc/hotplug.d/dect/00-dectstate
+++ b/dectmngr/files/etc/hotplug.d/dect/00-dectstate
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ "$ACTION" == "led_blink" ]; then
+    ubus call led.dect set '{"state":"notice"}'
+fi
+
+if [ "$ACTION" == "led_on" ]; then
+    ubus call led.dect set '{"state":"ok"}'
+fi
+
+if [ "$ACTION" == "led_off" ]; then
+    ubus call led.dect set '{"state":"off"}'
+fi
+
+
--- a/dectmngr/files/etc/init.d/dect
+++ b/dectmngr/files/etc/init.d/dect
@@ -0,0 +1,60 @@
+#!/bin/sh /etc/rc.common
+
+START=97
+STOP=10
+USE_PROCD=1
+
+DEST=
+DEFAULT=
+OPTIONS=""
+
+
+start_service() {
+	# avoid fp timing problem
+	echo 1 > /proc/sys/kernel/printk_with_interrupt_enabled
+	
+	# setup board specific dect parameters
+	cat /proc/nvram/rfpi | tr -d ' ' | atohx > /tmp/rfpi
+	cat /proc/nvram/fixed_emc | tr -d ' ' | atohx > /tmp/fixed_emc
+	cat /proc/nvram/bcm_def_freq | tr -d ' ' | atohx > /tmp/bcm_def_freq
+	DECTANTDIV=`db get hw.board.DectAntennaDiversity`
+	case "$DECTANTDIV" in
+		1|off) echo -ne "\x01" > /tmp/dect_antenna_diversity ;;
+		2) echo -ne "\x02" > /tmp/dect_antenna_diversity ;;
+		*) echo -ne "\x00" > /tmp/dect_antenna_diversity ;;
+	esac
+
+	if [ ! -f /etc/dect/nvs ]; then
+		cp /etc/dect/nvs_default /etc/dect/nvs
+		dd of=/etc/dect/nvs if=/tmp/rfpi conv=notrunc bs=1 seek=0
+		dd of=/etc/dect/nvs if=/tmp/fixed_emc conv=notrunc bs=1 seek=10
+		dd of=/etc/dect/nvs if=/tmp/bcm_def_freq conv=notrunc bs=1 seek=6
+		dd of=/etc/dect/nvs if=/tmp/dect_antenna_diversity conv=notrunc bs=1 seek=32
+		fsync /etc/dect/nvs
+	fi
+	
+	# init dectproxy
+	dectproxy > /dev/null 2>&1 &
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+stop_service() {
+        killall -9 dectproxy
+	killall -9 dectmngr
+}
+
+restart_service() {
+	echo "restarting dect"
+	killall dectmngr
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+reload_service() {
+	# reload config
+	dect -c
+}
+
+service_triggers() {
+        procd_add_reload_trigger dect
+}
+
--- a/dectmngr/files/sbin/dectreg
+++ b/dectmngr/files/sbin/dectreg
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# This script is likely not used. Just exit with
+# an error and see if someone screems... If not,
+# we can delete this file.
+exit 1
+
+
+[ -f /var/dectisregistering ] || {
+	touch /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -r
+	ubus call led.dect  set '{"state" : "notice"}'
+	sleep 20
+	rm /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -s
+	ubus call led.dect  set '{"state" : "ok"}'
+}
--- a/dectmngr2/Makefile
+++ b/dectmngr2/Makefile
@@ -1,20 +1,19 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
+
 include $(TOPDIR)/rules.mk

 PKG_RELEASE:=1
-PKG_VERSION:=1.3.0
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
+PKG_VERSION:=1.1.0
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=2c8990fd5275d469e8ab6c7a99e17fe0a56052ea
+PKG_SOURCE_VERSION:=ee63f0c087840adba9d944ae31d71a3ef9d64043
 PKG_NAME:=dectmngr2

-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE

 RSTRIP:=true
 export BUILD_DIR
@@ -22,7 +21,6 @@ export BUILD_DIR
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1

 include $(INCLUDE_DIR)/package.mk

@@ -30,7 +28,7 @@ define Package/dectmngr2
  CATEGORY:=Utilities
  TITLE:=Dectmngr2
  URL:=
-  DEPENDS:= +natalie-dect-h @+PACKAGE_bcmkernel:bcmkernel @+PACKAGE_bcmopen:bcmopen @(PACKAGE_bcmkernel||PACKAGE_bcmopen) +libubox +ubus +libpicoevent endptmngr
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
 endef

 define Package/dectmngr2/description
@@ -43,7 +41,6 @@ define Package/dectmngr2/install
 	$(INSTALL_DIR) $(1)/etc/dect/
 	$(INSTALL_DIR) $(1)/etc/config/
 	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/

 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
@@ -51,7 +48,6 @@ define Package/dectmngr2/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
 	$(CP) ./files/dect.config $(1)/etc/config/dect
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 endef

 $(eval $(call BuildPackage,dectmngr2))
--- a/dectmngr2/files/etc/uci-defaults/22-dect-defaults
+++ b/dectmngr2/files/etc/uci-defaults/22-dect-defaults
@@ -1,23 +0,0 @@
-#!/bin/sh
-
-
-# Workaround for product DG400 which has an
-# incorrect value in nvram from factory.
-
-if [ -e "/proc/nvram/BoardId" ]; then
-	boardid=$(cat /proc/nvram/BoardId)
-	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
-
-	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
-		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
-
-		db -q batch <<-EOT
-			set hw.board.hasDect=1
-			commit hw.board
-		EOT
-	fi
-fi
-
-
-exit 0
-
--- a/dslmngr/Makefile
+++ b/dslmngr/Makefile
@@ -1,81 +0,0 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dslmngr
-PKG_VERSION:=1.0.0
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7522faab4142fe2c0ac8cbf71bb0cc5bd49f0750
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-define Package/dslmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl
-endef
-
-define Package/dslmngr/description
- This package can be used to configure and provide status about
- the XDSL subsystem through UBUS.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Build/Compile
-	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
-endef
-
-define Package/dslmngr/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,dslmngr))
--- a/easy-qos/Makefile
+++ b/easy-qos/Makefile
@@ -1,51 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-qos
-PKG_VERSION:=1.1
-PKG_RELEASE:=0
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-qos
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_brcm63xx_mips)
-endef
-
-define Package/easy-qos/description
-	This package contains Easy QoS utility
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/easy-qos/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
-else
-	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-endif
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
-	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
-endef
-
-$(eval $(call BuildPackage,easy-qos))
--- a/easy-qos/files/etc/firewall.easyqos
+++ b/easy-qos/files/etc/firewall.easyqos
@@ -1 +0,0 @@
-/etc/init.d/easy_qos reload
--- a/easy-qos/files/etc/init.d/easy_qos.classcfg
+++ b/easy-qos/files/etc/init.d/easy_qos.classcfg
@@ -1,301 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-RULE_LIST="/tmp/easy_qos_rule.list"
-CLIENT_LIST="/tmp/easy_qos_class_client.list"
-BRIDGE_INTF=""
-
-[ -f /etc/profile.d/intel.sh ] && {
-	. /etc/profile.d/intel.sh
-	sh /etc/profile.d/intel.sh
-}
-
-log() {
-	echo "${@}"|logger -t easy_qos_class -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-exec_class_log() {
-	${@} |grep -i successful
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-		return 1
-	fi
-	return 0
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 8;;
-		"low")
-			echo 7;;
-		"besteffort")
-			echo 6;;
-		"normal")
-			echo 5;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 3;;
-		"high")
-			echo 2;;
-		"highest")
-			echo 1;;
-	esac
-}
-
-get_mark() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo "0x41/0x3df";;
-		"low")
-			echo "0x82/0x3df";;
-		"besteffort")
-			echo "0xc3/0x3df";;
-		"normal")
-			echo "0x104/0x3df";;
-		"video")
-			echo "0x145/0x3df";;
-		"medium")
-			echo "0x186/0x3df";;
-		"high")
-			echo "0x1c7/0x3df";;
-		"highest")
-			echo "0x208/0x3df";;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_ip_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j EXTMARK --set-mark ${mark}";
-	if [ "${proto}" != "icmp" ]; then
-		if [ -n "${ports}" ]; then
-			cmd="--match multiport --dports ${ports} ${cmd}";
-		fi
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd}
-}
-
-is_lan_bridge() {
-	local _section=$1
-	local _type
-	local _is_lan
-
-	config_get _type "$section" "type"
-	config_get _is_lan "$section" "is_lan"
-
-	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
-		BRIDGE_INTF="br-${_section}"
-	fi
-}
-
-get_bridge_interface() {
-	config_load network
-	config_foreach is_lan_bridge interface
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	# execute the delete rules written onto a file then delete the file
-	[ -f ${RULE_LIST} ] || return 0
-
-	while read line
-	do
-		log "Deleting old classification rules"
-		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
-	done <${RULE_LIST}
-
-	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
-	done
-	sync
-
-	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
-}
-
-# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
-create_rule() {
-	local proto=$1; shift
-	local mac_addr=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-	# Rule name is uniqe, so we take hash of all the input as rule_name
-	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
-
-	cmd="-j mark --mark ${mark}";
-
-	if [ "${mac_addr}" != "none" ]; then
-		cmd="--smac ${mac_addr} ${cmd}";
-	fi
-
-	if [ "${proto}" != "icmp" ]; then
-		if [ "${ports}" != "none" ]; then
-			IFS=","
-			for port in ${ports};
-			do
-				cmd="--dport ${port}:${port} ${cmd}";
-			done
-			IFS=' '
-		fi
-	fi
-	if [ "${proto}" != "none" ]; then
-		cmd="-p ${proto} $cmd"
-	fi
-	cmd="-i ${BRIDGE_INTF} $cmd"
-	cmd="-A ${rule_name} $cmd"
-
-	# Store the rule_names for cleanup on reload
-	exec_class_log classcfg ${cmd}
-	[ $? -eq 0 ] && \
-		echo ${rule_name}  >> ${RULE_LIST}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num port_list ip ipmark
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-	ipmark=$(get_mark ${priority})
-	ip=$(get_ipaddress ${macaddr})
-
-	if [ -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${macaddr} ${prio_num} ${port_list}
-			create_rule udp ${macaddr} ${prio_num} ${port_list}
-			if [ -n "${ip}" ]; then
-				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
-				create_ip_rule udp ${ip} ${ipmark} ${port_list}
-			fi
-		else
-			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
-			if [ -n "${ip}" ]; then
-				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	get_bridge_interface
-	map_client_entries
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
-	reload_service
-	log "Easy QoS class installed"
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos" "network"
-}
-
--- a/easy-qos/files/etc/init.d/easy_qos.ebtables
+++ b/easy-qos/files/etc/init.d/easy_qos.ebtables
@@ -1,140 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-log() {
-	echo "${@}"|logger -t easy_qos.ebtable -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	while [ -n "${rule}" ]; do
-		exec_log ebtables -t broute -D BROUTING ${rule}
-		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	done
-}
-
-create_rule() {
-	local protocol=$1; shift
-	local mac=$1; shift
-	local mark="0x$1"; shift
-	local forward_port=$1;
-	local cmd="";
-	local protocol_number
-
-	cmd="-j mark --mark-or ${mark}";
-	if [ -n "${forward_port}" ]; then
-		cmd="--ip-destination-port ${forward_port} ${cmd}";
-	fi
-	
-	case "${protocol}" in
-		"tcp")
-			protocol_number=6;;
-		"udp")
-			protocol_number=17;;
-		"dccp")
-			protocol_number=33;;
-		"sctp")
-			protocol_number=132;;
-		*)
-			log "Protocol ${protocol} not supported in ebtables"
-			return;;
-	esac
-			
-	cmd="--ip-proto ${protocol_number} $cmd"
-	cmd="-p ip $cmd"
-
-	cmd="-s ${mac} $cmd"
-	exec_log ebtables -t broute -A BROUTING ${cmd}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num protocol
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	protocol=$(echo ${proto}|tr [A-Z] [a-z])
-	prio_num=$(get_priority ${priority})
-	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
-		for p in ${port}; do
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
-				create_rule tcp ${macaddr} ${prio_num} ${p}
-				create_rule udp ${macaddr} ${prio_num} ${p}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
-			fi
-		done
-		# Create rule for all ports if port is not mentioned in uci
-		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
-				create_rule tcp ${macaddr} ${prio_num}
-				create_rule udp ${macaddr} ${prio_num}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	# Do not apply rules if ebtables is not present in system
-	[ -x /usr/sbin/ebtables ] || return;
-
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	reload_service
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-
--- a/easy-qos/files/etc/init.d/easy_qos.iptables
+++ b/easy-qos/files/etc/init.d/easy_qos.iptables
@@ -1,186 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /usr/share/libubox/jshn.sh
-
-START=99
-USE_PROCD=1
-
-CLIENT_LIST="/tmp/easy_qos_client.list"
-
-log() {
-	echo "${@}"|logger -t easy_qos -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-#	json_add_array "clients"
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
-	done
-}
-
-check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark="0x$1/0x$1"; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j MARK --set-xmark ${mark}";
-	if [ -n "${ports}" ]; then
-		cmd="--match multiport --dports ${ports} ${cmd}";
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd} 
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num ip port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	ip=$(get_ipaddress ${macaddr})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${ip} ${prio_num} ${port_list}
-			create_rule udp ${ip} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${ip} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	clear_existing_rules
-	map_client_entries
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	reload_service
-	echo "Easy QoS installed">/dev/console;
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-
--- a/easy-qos/files/etc/uci-defaults/60-easyqos-reqs
+++ b/easy-qos/files/etc/uci-defaults/60-easyqos-reqs
@@ -1,10 +0,0 @@
-# Add firewall include
-uci -q batch <<-EOT
-        delete firewall.easyqos
-        set firewall.easyqos=include
-        set firewall.easyqos.path=/etc/firewall.easyqos
-        set firewall.easyqos.reload=1
-	uci del_list firewall.easyqos._access_w="root"
-	uci add_list firewall.easyqos._access_w="root"
-        commit firewall
-EOT
--- a/easy-soc-libs/Config.in
+++ b/easy-soc-libs/Config.in
@@ -1,23 +0,0 @@
-if (PACKAGE_libwifi || PACKAGE_libdsl || PACKAGE_libethernet)
-menu "configurations"
-
-config IOP_LLA_LIBS_DEBUG
-	bool "Enable debugging support"
-	default n
-
-config LIBWIFI_DEBUG
-	depends on PACKAGE_libwifi
-	bool "Enable wifi debugging"
-	default n
-
-config LIBDSL_DEBUG
-	depends on PACKAGE_libdsl
-	bool "Enable xdsl debugging"
-	default n
-
-config LIBDSL_TEST
-	depends on PACKAGE_libdsl
-	bool "Libdsl test program"
-	default n
-endmenu
-endif
--- a/easy-soc-libs/Makefile
+++ b/easy-soc-libs/Makefile
@@ -1,165 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-soc-libs
-PKG_VERSION:=2.5.0
-PKG_RELEASE:=1
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=6bf3911521b6c9072c20798c59390280afd0f16f
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-soc-libs
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=IOPSYS easy SoC libraries
-  SUBMENU:=IOPSYS easy SoC libraries
-  DEPENDS:=+libopenssl
-  MENU:=1
-endef
-
-define Package/libwifi/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/libwifi
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route
-endef
-
-define Package/libethernet
-  $(call Package/easy-soc-libs)
-  TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+TARGET_iopsys_ramips:swconfig
-endef
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
-  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-  TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-  TARGET_CFLAGS +=-DIOPSYS_INTEL
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-ifdef CONFIG_IOP_LLA_LIBS_DEBUG
-  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
-endif
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
-  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi +TARGET_intel_mips:kmod-ppa-drv
-endef
-
-subdirs := \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet)
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
-	-I$(STAGING_DIR)/usr/include/libnl3
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)" \
-	PLATFORM="$(TARGET_PLATFORM)" \
-	subdirs="$(subdirs)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Build/InstallDev/libwifi
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libdsl
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libethernet
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
-endef
-
-define Build/Compile
-	$(call Build/Compile/Default)
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
-endif
-endef
-
-define Build/InstallDev
-	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
-endef
-
-define Package/libwifi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
-endef
-
-define Package/libethernet/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
-endef
-
-define Package/libdsl/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
-endif
-endef
-
-$(eval $(call BuildPackage,libwifi))
-$(eval $(call BuildPackage,libdsl))
-$(eval $(call BuildPackage,libethernet))
-
--- a/endptmngr/Config.in
+++ b/endptmngr/Config.in
--- a/endptcfg/Makefile
+++ b/endptcfg/Makefile
@@ -0,0 +1,92 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptcfg
+PKG_VERSION:=0.2
+
+PKG_SOURCE_VERSION:=1194b05278bd0945ca5c76436e56617b86871a65
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=endptcfg-open
+else
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=git@private.inteno.se:endptcfg
+PKG_SOURCE_PROTO:=git
+endif
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+LDFLAGS+= \
+		-Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+BCMKERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+export BCMKERNEL_DIR
+
+TARGET_LDFLAGS += $(BCMKERNEL_DIR)/userspace/private/apps/vodsl/telephonyProfiles/telephonyProfiles.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/voip/util/log/vodslLog.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/endpoint/endpoint_user.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/bos/bos.o \
+			-lpthread
+
+TARGET_CFLAGS += -DFAKE_SSP
+
+RSTRIP:=true
+export BUILD_DIR
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptcfg
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint driver configuration application
+  URL:=
+  DEPENDS:=+libpthread bcmkernel
+endef
+
+define Package/endptcfg/description
+	Broadcom endpoint driver configuration application
+endef
+
+define Package/endptcfg/config
+	source "$(SOURCE)/Config.in"
+endef
+
+ifneq ($(CONFIG_ENDPT_OPEN),y)
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		$(TARGET_CONFIGURE_OPTS) LINUX_DIR=$(LINUX_DIR) LDFLAGS="$(TARGET_LDFLAGS)" CFLAGS="$(TARGET_CFLAGS) \
+			-I$(LINUX_DIR)/include \
+			-I$(STAGING_DIR)/usr/include \
+			-DRS_ENDIAN_TYPE=RS_BIG_ENDIAN \
+			-DBOS_OS_LINUXUSER -DBOS_CFG_TIME \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/broadcom/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/endpt/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/codec \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/publicInc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/casCtl/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_drivers/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/private/apps/vodsl/voip/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/LinuxUser"
+endef
+else
+define Build/Compile
+endef
+endif
+
+define Package/endptcfg/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	cp $(PKG_BUILD_DIR)/endptcfg $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,endptcfg))
--- a/endptmngr/Makefile
+++ b/endptmngr/Makefile
@@ -1,68 +0,0 @@
-#
-# Copyright (C) 2018 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=ef49d57c3824df4dfb4921d39461e2bd14f918a7
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://download.iopsys.eu/iopsys/opensdk/
-PKG_NAME:=endptmngr-open
-PATCH_DIR:=
-else
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/endptmngr
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_NAME:=endptmngr
-endif
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_PARALLEL:=1
-
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/endptmngr/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/endptmngr
-  CATEGORY:=Utilities
-  TITLE:=Brcmslic
-  URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent @+PACKAGE_bcmkernel:bcmkernel @+PACKAGE_bcmopen:bcmopen @(PACKAGE_bcmkernel||PACKAGE_bcmopen) @TARGET_HAS_VOICE
-endef
-
-define Package/endptmngr/description
-	endptmngr
-endef
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-
-define Build/Compile
-endef
-
-endif
-
-
-define Package/endptmngr/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,endptmngr))
--- a/fatrace/Makefile
+++ b/fatrace/Makefile
@@ -1,61 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v3.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=fatrace
-PKG_VERSION:=0.12
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=98af6019a4a1b478a6fa35f74528cb3cd404ae40
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://git.launchpad.net/fatrace
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPL-3.0
-PKG_LICENSE_FILES:=LICENSE
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-PKG_CONFIG_DEPENDS := CONFIG_KERNEL_FANOTIFY
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fatrace
-	CATEGORY:=Utilities
-	TITLE:=Report system wide file access events
-	URL:=
-	DEPENDS	:= +@KERNEL_FANOTIFY
-endef
-
-define Package/fatrace/description
-	Report system wide file access events.
-endef
-
-MAKE_INSTALL_FLAGS += PREFIX="/" 
-
-define Package/fatrace/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/sbin/fatrace $(1)/sbin/
-#	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,fatrace))
-
-
--- a/fatrace/patches/001-fix-O_LARGEFILE.patch
+++ b/fatrace/patches/001-fix-O_LARGEFILE.patch
@@ -1,14 +0,0 @@
-diff --git a/fatrace.c b/fatrace.c
-index 1c0899a..b7d1560 100644
--- a/fatrace.c
-+++ b/fatrace.c
-@@ -44,7 +44,8 @@
-  * http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=1e2ee49f7
-  * O_LARGEFILE is usually 0, so hardcode it here
-  */
-#define KERNEL_O_LARGEFILE 00100000
-+//#define KERNEL_O_LARGEFILE 00100000
-+#define KERNEL_O_LARGEFILE O_LARGEFILE
- 
- /* command line options */
- static char* option_output = NULL;
--- a/fatrace/patches/002-fflush.patch
+++ b/fatrace/patches/002-fflush.patch
@@ -1,12 +0,0 @@
-diff --git a/fatrace.c b/fatrace.c
-index b7d1560..6179272 100644
--- a/fatrace.c
-+++ b/fatrace.c
-@@ -149,6 +149,7 @@ print_event(const struct fanotify_event_metadata *data,
-         printf ("%li.%06li ", event_time->tv_sec, event_time->tv_usec);
-     }
-     printf ("%s(%i): %s %s\n", procname, data->pid, mask2str (data->mask), pathname);
-+    fflush(stdout);
- }
- 
- /**
--- a/fping/Makefile
+++ b/fping/Makefile
@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fping
-PKG_VERSION:=4.0
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://fping.org/dist/
-PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
-
-PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
-PKG_LICENSE:=BSD-4-Clause
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fping
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
-  URL:=http://fping.org/
-endef
-
-
-define Package/fping/description
-	fping is a ping like program which uses the Internet Control Message Protocol
-	(ICMP) echo request to determine if a target host is responding.  fping
-	differs from ping in that you can specify any number of targets on the command
-	line, or specify a file containing the lists of targets to ping.  Instead of
-	sending to one target until it times out or replies, fping will send out a
-	ping packet and move on to the next target in a round-robin fashion.
-endef
-
-CONFIGURE_ARGS+= \
-	--enable-ipv4 \
-	--enable-ipv6
-
-TARGET_CFLAGS += -std=gnu99
-
-define Package/fping/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,fping))
--- a/gigaset-elements/.gitignore
+++ b/gigaset-elements/.gitignore
@@ -0,0 +1,3 @@
+
+git-src
+
--- a/gigaset-elements/Makefile
+++ b/gigaset-elements/Makefile
@@ -0,0 +1,65 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=gigaset-elements
+
+PKG_VERSION:=2.4.2
+# PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
+PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
+
+PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=$(PKG_GIGASET_ELEMENTS_VERSION)
+
+
+PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+######################################################
+
+define Package/gigaset-elements
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libjson-c +libcurl
+  TITLE:=Gigaset elements
+endef
+
+######################################################
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) all
+endef
+
+
+
+define Package/gigaset-elements/install
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
+endef
+
+
+
+define Package/gigaset-elements/preinst
+#!/bin/sh
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
+endef
+
+
+define Package/gigaset-elements/postrm
+#!/bin/sh
+rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
+rm -rf /usr/share/gigaset
+endef
+
+
+######################################################
+
+$(eval $(call BuildPackage,gigaset-elements))
+
--- a/gryphon-led-module/Makefile
+++ b/gryphon-led-module/Makefile
@@ -1,62 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=gryphon-led-kernel-module
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/$(PKG_NAME)
-  SUBMENU:=LED modules
-  TITLE:=LED driver for Gryphon
-  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
-  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
-  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  PKG_LICENSE:=GPLv2
-  PKG_LICENSE_URL:=
-endef
-
-define KernelPackage/$(PKG_NAME)/description
-  This package contains the LED driver for Gryphon devices.
-endef
-
-EXTRA_KCONFIG:= CONFIG_RGB_LED=m
-
-MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) src/* $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
-		modules
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-endef
-
-$(eval $(call KernelPackage,$(PKG_NAME)))
--- a/gryphon-led-module/src/Makefile
+++ b/gryphon-led-module/src/Makefile
@@ -1,26 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-MODULE_NAME  = gryphon-led-kernel-module
-
-obj-m  := $(MODULE_NAME).o
-
-GENEXIS_FILES= \
-	main.o \
-	sk9822.o \
-	sk9822_bitbang.o
-
-$(MODULE_NAME)-objs := $(GENEXIS_FILES)
--- a/gryphon-led-module/src/main.c
+++ b/gryphon-led-module/src/main.c
@@ -1,253 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#define DEBUG 1
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/printk.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/version.h>
-
-#include "sk9822.h"
-
-#define DRIVER_NAME			"canyon_led"
-#define DRIVER_AUTHOR		"Genexis B.V."
-#define DRIVER_DESC			"Canyon LED driver for SK9822"
-#define DRIVER_VERSION	"1"
-
-/**
- * sysfs interfaces
- */
-
-static ssize_t get_led_color(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	/* [ln] todo: dummy implementation */
-	int len;
-
-	len = sprintf(buf, "%d\n", 123);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-	}
-
-	return len;
-}
-
-/**
- * @brief Set complete LED strip to a specific color
- * @retval count number of bytes written
- * @retval -EMSGSIZE if the message is too big
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_color(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	size_t buflen = count;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	/* strip newline */
-	if ((count > 0) && (buf[count-1] == '\n')) {
-		buflen--;
-	}
-
-	if (buflen != 6) { // RRGGBB\0
-		return -EMSGSIZE;
-	}
-
-	// Update the LED array here
-	ret = sk9822_set_color_str(sk9822, buf);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to set led color\n");
-		return -EIO;
-	}
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
-
-static struct attribute *sk9822_dev_attrs[] = {
-	 &dev_attr_led_color.attr,
-	 NULL
-};
-
-static struct attribute_group sk9822_dev_attr_group = {
-	.name = "sk9822",
-	.attrs = sk9822_dev_attrs,
-};
-
-/**
- * device prope and removal
- */
-
-static int canyon_led_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct sk9822_leds *leds;
-
-	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
-	if (!leds) {
-		return -ENOMEM;
-	}
-	leds->dev = &pdev->dev;
-	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
-
-	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
-	if (ret < 0) {
-		dev_warn(&pdev->dev, "Could not read led-count property\n");
-		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
-	}
-
-	leds->led_colors = devm_kzalloc(&pdev->dev,
-			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
-	if (!leds->led_colors) {
-		return -ENOMEM;
-	}
-
-
-	platform_set_drvdata(pdev, leds);
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-
-	gpiod_direction_output(leds->clock_gpio, 1);
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		leds->clock_gpio = NULL;
-		return PTR_ERR(leds->clock_gpio);
-	} else {
-		printk(KERN_INFO "Got clock gpio\n");
-		gpiod_set_value(leds->clock_gpio, 0);
-	}
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-
-	gpiod_direction_output(leds->data_gpio, 1);
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		leds->data_gpio = NULL;
-		return PTR_ERR(leds->data_gpio);
-	} else {
-		printk(KERN_INFO "Got data gpio\n");
-		gpiod_set_value(leds->data_gpio, 0);
-	}
-
-	printk(KERN_INFO "Attempt to set filefs stuff\n");
-	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-	if (ret) {
-		dev_err(&pdev->dev, "sysfs creation failed\n");
-		return ret;
-	}
-
-#if 0
-	printk(KERN_INFO "Flash LEDs to verify they work\n");
-	sk9822_set_color_str(leds, "00FF00");
-	sk9822_update(leds);
-	msleep(200);
-	sk9822_set_color_str(leds, "000000");
-	sk9822_update(leds);
-#endif
-
-	printk(KERN_INFO "canyon led successfully probed\n");
-
-	return 0;
-}
-
-static int canyon_led_remove(struct platform_device *pdev)
-{
-	struct sk9822_leds *leds;
-
-	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-
-	leds = platform_get_drvdata(pdev);
-	if (IS_ERR(leds)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -1;
-	}
-
-	if (leds->clock_gpio) {
-		gpiod_put(leds->clock_gpio);
-	}
-
-	if (leds->data_gpio) {
-		gpiod_put(leds->data_gpio);
-	}
-
-	printk(KERN_NOTICE "Bye, bye\n");
-
-	return 0;
-}
-
-/**
- * platform driver metadata
- */
-
-static const struct of_device_id canyon_led_of_ids[] = {
-	{ .compatible = "canyon,led" },
-	{ }
-};
-
-static struct platform_driver canyon_led = {
-	.probe = &canyon_led_probe,
-	.remove = &canyon_led_remove,
-	.driver = {
-		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
-		.of_match_table = canyon_led_of_ids,
-	},
-};
-
-MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
-module_platform_driver(canyon_led);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
--- a/gryphon-led-module/src/sk9822.c
+++ b/gryphon-led-module/src/sk9822.c
@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-#include "sk9822_bitbang.h"
-
-cRGB __hexs_to_rgb(const char *hex)
-{
-	cRGB rgb;
-	int r, g, b;
-
-	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
-	// This needs sanity checking
-	rgb.r = r;
-	rgb.g = g;
-	rgb.b = b;
-	return rgb;
-}
-
-/**
- * @brief update the color over the given device struct to the provided HEX color
- */
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
-{
-	int i;
-	cRGB color = __hexs_to_rgb(hex);
-
-	for (i = 0; i < sk9822->led_count; i++) {
-		sk9822->led_colors[i] = color;
-	}
-
-	return 0;
-}
-
-/**
- * @brief write device struct to the device
- */
-int sk9822_update(struct sk9822_leds *sk9822)
-{
-	uint16_t i;
-	uint16_t led_count = sk9822->led_count;
-
-	// Start Frame
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-
-	for (i = 0; i < led_count; i++) {
-		cRGB *p = &sk9822->led_colors[i];
-		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
-		sk9822_bb_write(sk9822, p->b);
-		sk9822_bb_write(sk9822, p->g);
-		sk9822_bb_write(sk9822, p->r);
-	}
-
-	// End frame
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-
-	return 0;
-}
--- a/gryphon-led-module/src/sk9822.h
+++ b/gryphon-led-module/src/sk9822.h
@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef SK9822_H_
-#define SK9822_H_
-
-#include <linux/types.h>
-
-#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
-#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
-
-typedef struct {
-	uint8_t b;
-	uint8_t g;
-	uint8_t r;
-} cRGB;   // BGR (SK9822 Standard)
-
-struct sk9822_leds {
-	struct device *dev;
-	struct gpio_desc *clock_gpio;
-	struct gpio_desc *data_gpio;
-
-	cRGB *led_colors;
-	uint8_t led_brightness;
-	uint16_t led_count;
-};
-
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
-int sk9822_update(struct sk9822_leds *sk9822);
-
-#endif /* SK9822_H_ */
--- a/gryphon-led-module/src/sk9822_bitbang.c
+++ b/gryphon-led-module/src/sk9822_bitbang.c
@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-/**
- * @brief Bitbang write operation CLOCK+DATA
- *
- * Assumed state before call: CLOCK- Low, DATA- High
- */
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
-{
-	uint8_t i;
-
-	for (i = 0; i < 8 ; i++) {
-		if (!(c&0x80)) {
-			gpiod_set_value(sk9822->data_gpio, 0); // set data low
-		} else {
-			gpiod_set_value(sk9822->data_gpio, 1); // set data high
-		}
-
-		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
-		c <<= 1;
-		udelay(1); // stretch clock
-		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
-	}
-
-	// State after call: SCK Low, Data high
-}
--- a/gryphon-led-module/src/sk9822_bitbang.h
+++ b/gryphon-led-module/src/sk9822_bitbang.h
@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _SK9822_BB_H_
-#define _SK9822_BB_H_
-
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
-
-#endif /* _SK9822_BB_H_ */
--- a/ice-client/Config.in
+++ b/ice-client/Config.in
@@ -1,4 +1,4 @@

-config WIFILIFE_OPEN
+config ICE_OPEN
       bool "Use pre-compiled version for Open SDK"
       default n
--- a/ice-client/Makefile
+++ b/ice-client/Makefile
@@ -0,0 +1,989 @@
+include $(TOPDIR)/rules.mk
+
+# We use the foldername as main package name
+PKG_NAME:=ice-client
+
+CFMODULES:=$(filter CONFIG_PACKAGE_$(PKG_NAME)-%,$(.VARIABLES))
+CFMODULES:=$(subst CONFIG_PACKAGE_$(PKG_NAME)-,,$(CFMODULES))
+$(info Building package: $(PKG_NAME))
+$(info Building with additional modules: $(CFMODULES))
+export CFMODULES
+
+export HOME_DIR:=$(TOPDIR)
+
+export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
+
+export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
+export LOGIN:=$(shell whoami)
+BASE_PKG_VERSION:=3.4.1
+PKG_RELEASE:=RC11
+PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
+export PKG_VERSION
+
+###########################--RELEASE--################################
+
+PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
+PKG_SOURCE_VERSION:=184d29446fe6103f567c968bf35569625326a82c
+ifeq ($(CONFIG_ICE_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+#PKG_NAME:=ice-client-open
+else
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=git@private.inteno.se:ice-client.git
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
+endif
+
+
+###########################--RELEASE--################################
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ice-client/Default
+	CATEGORY:=Utilities
+	URL:=http://inteno.se/
+	DEPENDS:= ice-client
+endef
+
+define Package/ice-client
+$(call Package/ice-client/Default)
+	TITLE:=ice-client
+	MENU:=1
+	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
+endef
+
+define Package/ice-client/config
+	source "$(SOURCE)/Config.in"
+endef
+
+###########################--DEVELOPMENT--################################
+# Development settings
+# Uncomment stuff  Build/Prepare
+#
+# Plus make sure to comment and provide the following lines above
+# #PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
+# #PKG_SOURCE_VERSION:=a11bf64e6b1054803b52750aabd71bf440ff6e16
+# #PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
+# #PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz
+# 
+# PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
+# 
+#
+# These settings allow you to specify a soruce folder where your source code is located
+# This avoids having to tar-zip or fetch from git each time
+# Changes can be done in your sources while the build is performed somewhere else
+# If you forget some settings, your source folder will be deleted!!! So be carefull and 
+# check in or backup your sources first before doing this.
+#
+#define Build/Prepare
+#	rm -rf $(PKG_BUILD_DIR)
+#	ln -s /home/erik/Desktop/ice-client $(PKG_BUILD_DIR)
+##	ln -s /home/erik/Desktop/checkCompilation/iopsys-client $(PKG_BUILD_DIR)
+#endef
+
+###########################--DEVELOPMENT--################################
+
+
+#
+# Specify where and how to install the program. Since we only have one file,
+# the helloworld executable, install it by copying it to the /bin directory on
+# the router. The $(1) variable represents the root directory on the router running
+# OpenWrt. The $(INSTALL_DIR) variable contains a command to prepare the install
+# directory if it does not already exist.  Likewise $(INSTALL_BIN) contains the
+# command to copy the binary file from its current location (in our case the build
+# directory) to the install directory.
+
+ifeq ($(CONFIG_ICE_OPEN),y)
+define Build/Compile
+endef
+else
+define Build/Configure
+	echo $(BASE_PKG_VERSION)-$(PKG_RELEASE) > $(PKG_BUILD_DIR)/core/version.txt
+	echo $(DATE) > $(PKG_BUILD_DIR)/core/date.txt
+	echo $(LOGIN) > $(PKG_BUILD_DIR)/core/login.txt
+	$(MAKE) -C $(PKG_BUILD_DIR) config
+endef
+
+define Build/Clean
+	$(MAKE) -C $(PKG_BUILD_DIR) clean
+endef
+endif
+
+define Package/ice-client/preinst
+#!/bin/sh
+echo "backup current config"
+if [ -f "/etc/iopsys/server.ini" ]; then
+	cp /etc/iopsys/server.ini /tmp/iopsysserver.ini
+fi
+if [ -f "/etc/config/ice" ]; then
+	cp /etc/config/ice /tmp/ice.back
+fi
+exit 0
+endef
+
+ifeq ($(CONFIG_ICE_OPEN),y)
+define Package/ice-client/install
+	$(INSTALL_DIR) $(1)/bin
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/usr
+	$(CP) $(PKG_BUILD_DIR)/bin/* $(1)/bin/
+	$(CP) $(PKG_BUILD_DIR)/etc/* $(1)/etc/
+	$(CP) $(PKG_BUILD_DIR)/usr/* $(1)/usr/
+endef
+else
+define Package/ice-client/install
+	$(INSTALL_DIR) $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/core/ice $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/modules/system/ubusevent/obj/iopsys/ubusevent $(1)/bin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1,texecService.so.1.0.1} $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/lib/wsice/obj/iopsys/libwsice.so $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/execute
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/progress
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/result
+	$(CP) $(PKG_BUILD_DIR)/scripts/scheduleiperf.sh $(1)/bin/ifs/iperf/execute
+	$(INSTALL_DIR) $(1)/etc/config
+	$(CP) $(PKG_BUILD_DIR)/scripts/etc/config/ice $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/iopsys
+	$(CP) $(PKG_BUILD_DIR)/scripts/server.ini $(1)/etc/iopsys	
+	$(CP) $(PKG_BUILD_DIR)/scripts/modify.ini $(1)/etc/iopsys
+	$(INSTALL_DIR) $(1)/etc/iopsys/certificates
+	$(CP) $(PKG_BUILD_DIR)/scripts/cert_server_ca.pem $(1)/etc/iopsys/certificates
+	$(CP) $(PKG_BUILD_DIR)/scripts/inteno_root_ca.pem $(1)/etc/iopsys/certificates
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(CP) $(PKG_BUILD_DIR)/scripts/ice-client $(1)/etc/init.d/ice-client
+endef
+endif
+
+define Package/ice-client/postinst
+#!/bin/sh
+echo "Enabling rc.d symlink for iopsys"
+cp /tmp/iopsysserver.ini /etc/iopsys/server.ini 
+rm -f /tmp/iopsysserver.ini 
+cp /tmp/ice.back /etc/config/ice 
+rm -f /tmp/ice.back
+if [ -f "/etc/rc.d/S98ice-client" ]; then
+	/etc/init.d/ice-client restart
+fi
+exit 0
+endef
+
+# Additional modules
+ifneq ($(CONFIG_ICE_OPEN),y)
+# Camerawatch
+define Package/ice-client-camerawatch
+$(call Package/ice-client/Default)
+TITLE:=Camerawatch
+DEPENDS+= +libjpeg 
+endef
+
+define Package/ice-client-camerawatch/description
+Camerawatch module for ice-client
+endef
+
+define Package/ice-client-camerawatch/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=cameramanager" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-camerawatch/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=cameramanager" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-camerawatch/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/etc/iopsys
+	$(CP) $(PKG_BUILD_DIR)/core/lib/camerawatch.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-camerawatch/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	/bin/echo "system moduleAdd file=camerawatch.so.1.0.1" package="ice-client-camerawatch" > /tmp/cfin
+fi
+exit 0
+endef
+
+# Guest
+define Package/ice-client-guest
+  $(call Package/ice-client/Default)
+  TITLE:=Guest
+  DEPENDS+= 
+endef
+
+define Package/ice-client-guest/description
+Guest module for ice-client
+endef
+
+define Package/ice-client-guest/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=guestMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-guest/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=guestMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-guest/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/guestService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-guest/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	/bin/echo "system moduleAdd file=guestService.so.1.0.1" package="ice-client-guest" > /tmp/cfin
+fi
+exit 0
+endef
+
+# OpenVPN
+define Package/ice-client-openvpn
+  $(call Package/ice-client/Default)
+  TITLE:=OpenVPN
+  DEPENDS+= +openvpn
+endef
+
+define Package/ice-client-openvpn/description
+OpenVPN module for ice-client
+endef
+
+define Package/ice-client-openvpn/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=ovpnMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-openvpn/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=ovpnMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-openvpn/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/ovpnService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-openvpn/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	/bin/echo "system moduleAdd file=ovpnService.so.1.0.1" package="ice-client-openvpn" > /tmp/cfin
+fi
+exit 0
+endef
+
+# Anyfi
+define Package/ice-client-anyfi
+  $(call Package/ice-client/Default)
+  TITLE:=AnyFi
+  DEPENDS+= 
+endef
+
+define Package/ice-client-anyfi/description
+AnyFi module for ice-client
+endef
+
+define Package/ice-client-anyfi/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=anyfiMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-anyfi/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=anyfiMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-anyfi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/anyfiService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-anyfi/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	/bin/echo "system moduleAdd file=anyfiService.so.1.0.1" package="ice-client-anyfi" > /tmp/cfin
+fi
+exit 0
+endef
+
+# Netrounds
+define Package/ice-client-netrounds
+  $(call Package/ice-client/Default)
+  TITLE:=Netrounds
+  DEPENDS+= 
+endef
+
+define Package/ice-client-netrounds/description
+Netrounds module for ice-client
+endef
+
+define Package/ice-client-netrounds/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=netroundsMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-netrounds/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=netroundsMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-netrounds/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/netroundsService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-netrounds/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	/bin/echo "system moduleAdd file=netroundsService.so.1.0.1" package="ice-client-netrounds" > /tmp/cfin
+fi
+exit 0
+endef
+
+# Logreader
+define Package/ice-client-logreader
+  $(call Package/ice-client/Default)
+  TITLE:=LogReader
+  DEPENDS+= 
+endef
+
+define Package/ice-client-logreader/description
+Logread module for ice-client
+endef
+
+define Package/ice-client-logreader/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=log" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-logreader/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=log" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-logreader/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/logService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-logreader/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=logService.so.1.0.1" package="ice-client-logreader" > /tmp/cfin
+fi
+exit 0
+endef
+
+
+# fileme
+define Package/ice-client-fileme
+  $(call Package/ice-client/Default)
+  TITLE:=FileMe
+  DEPENDS+= +lighttpd +lighttpd-mod-webdav +lighttpd-mod-setenv +lighttpd-mod-userdir +samba2-client +samba2-common +libpcre +libltdl +libxml2
+endef
+
+define Package/ice-client-fileme/description
+FileMe module for ice-client
+endef
+
+define Package/ice-client-fileme/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=fileMeMgr" > /tmp/cfin
+  /bin/sleep 2
+fi
+exit 0
+endef
+
+define Package/ice-client-fileme/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=fileMeMgr" > /tmp/cfin
+  /bin/sleep 2
+fi
+exit 0
+endef
+
+define Package/ice-client-fileme/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/filemeService.so.1.0.1 $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/etc/iopsys/fileme/lighttpd/conf.d
+	$(CP) $(PKG_BUILD_DIR)/scripts/fileme/mime.conf $(1)/etc/iopsys/fileme/lighttpd
+	$(CP) $(PKG_BUILD_DIR)/scripts/fileme/conf.d/10-webdav.conf $(1)/etc/iopsys/fileme/lighttpd/conf.d
+	$(INSTALL_DIR) $(1)/etc/iopsys/fileme/docroot/dav
+	$(INSTALL_DIR) $(1)/etc/iopsys/fileme/docroot/shares
+endef
+
+define Package/ice-client-fileme/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=filemeService.so.1.0.1" package="ice-client-fileme" > /tmp/cfin
+fi
+exit 0
+endef
+
+# example
+define Package/ice-client-example
+  $(call Package/ice-client/Default)
+  TITLE:=example
+  DEPENDS+= 
+endef
+
+define Package/ice-client-example/description
+example module for ice-client
+endef
+
+define Package/ice-client-example/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=example" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-example/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=example" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-example/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/exampleService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-example/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=exampleService.so.1.0.1" package="ice-client-example" > /tmp/cfin
+fi
+exit 0
+endef
+
+# iperf
+define Package/ice-client-iperf
+  $(call Package/ice-client/Default)
+  TITLE:=iperf
+  DEPENDS+= 
+endef
+
+define Package/ice-client-iperf/description
+iperf module for ice-client
+endef
+
+define Package/ice-client-iperf/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=iperfMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-iperf/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=iperfMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-iperf/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/iperfService.so.1.0.1 $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/execute
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/progress
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/result
+	$(CP) $(PKG_BUILD_DIR)/scripts/scheduleiperf.sh $(1)/bin/ifs/iperf/execute
+endef
+
+define Package/ice-client-iperf/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=iperfService.so.1.0.1" package="ice-client-iperf" > /tmp/cfin
+fi
+exit 0
+endef
+
+# rshell
+define Package/ice-client-rshell
+  $(call Package/ice-client/Default)
+  TITLE:=rshell
+  DEPENDS+= 
+endef
+
+define Package/ice-client-rshell/description
+rshell module for ice-client
+endef
+
+define Package/ice-client-rshell/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=rshellMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-rshell/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=rshellMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-rshell/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/rshellService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-rshell/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=rshellService.so.1.0.1" package="ice-client-rshell" > /tmp/cfin
+fi
+exit 0
+endef
+
+# rework
+define Package/ice-client-rework
+  $(call Package/ice-client/Default)
+  TITLE:=rework
+  DEPENDS+= 
+endef
+
+define Package/ice-client-rework/description
+rework module for ice-client
+endef
+
+define Package/ice-client-rework/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=rework" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-rework/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=rework" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-rework/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/reworkService.so.1.0.1 $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/modules/rework/sshpass-1.05/obj/iopsys/sshpass $(1)/bin
+endef
+
+define Package/ice-client-rework/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=reworkService.so.1.0.1" package="ice-client-rework" > /tmp/cfin
+fi
+exit 0
+endef
+
+# sip
+define Package/ice-client-sip
+  $(call Package/ice-client/Default)
+  TITLE:=sip
+  DEPENDS+= 
+endef
+
+define Package/ice-client-sip/description
+sip module for ice-client
+endef
+
+define Package/ice-client-sip/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=sip" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-sip/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=sip" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-sip/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/sipService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-sip/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=sipService.so.1.0.1" package="ice-client-sip" > /tmp/cfin
+fi
+exit 0
+endef
+
+# monitor
+define Package/ice-client-monitor
+  $(call Package/ice-client/Default)
+  TITLE:=monitor
+  DEPENDS+= 
+endef
+
+define Package/ice-client-monitor/description
+monitor module for ice-client
+endef
+
+define Package/ice-client-monitor/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=monitor" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-monitor/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=monitor" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-monitor/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/monitorService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-monitor/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=monitorService.so.1.0.1" package="ice-client-monitor" > /tmp/cfin
+fi
+exit 0
+endef
+
+# gigaset
+define Package/ice-client-gigaset
+  $(call Package/ice-client/Default)
+  TITLE:=gigaset
+  DEPENDS+= 
+endef
+
+define Package/ice-client-gigaset/description
+gigaset module for ice-client
+endef
+
+define Package/ice-client-gigaset/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=gigaset" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-gigaset/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=gigaset" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-gigaset/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/gigasetService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-gigaset/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=gigasetService.so.1.0.1" package="ice-client-gigaset" > /tmp/cfin
+fi
+exit 0
+endef
+
+# texec
+define Package/ice-client-texec
+  $(call Package/ice-client/Default)
+  TITLE:=texec
+  DEPENDS+= 
+endef
+
+define Package/ice-client-texec/description
+remote script execution module for ice-client
+endef
+
+define Package/ice-client-texec/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=texec" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-texec/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=tExecMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-texec/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/texecService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-texec/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=texecService.so.1.0.1" package="ice-client-texec" > /tmp/cfin
+fi
+exit 0
+endef
+
+# bmspeedtest
+define Package/ice-client-bcmspeedmgr
+  $(call Package/ice-client/Default)
+  TITLE:=bcmspeedmgr
+  DEPENDS+= 
+endef
+
+define Package/ice-client-bcmspeedmgr/description
+bcmspeedmgr module for ice-client
+endef
+
+define Package/ice-client-bcmspeedmgr/install
+	$(INSTALL_DIR) $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/bcmspeedmgr $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/speedsvc $(1)/bin
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(CP) $(PKG_BUILD_DIR)/platforms/iopsys/bcmspeedtestservice $(1)/etc/init.d/bcmspeedtestservice
+endef
+
+define Package/ice-client-bcmspeedmgr/postinst
+#!/bin/sh
+/etc/init.d/bcmspeedtestservice stop
+/etc/init.d/bcmspeedtestservice start
+exit 0
+endef
+
+endif
+
+# This line executes the necessary commands to compile our program.
+# The above define directives specify all the information needed, but this
+# line calls BuildPackage which in turn actually uses this information to
+# build a package.
+$(eval $(call BuildPackage,ice-client))
+ifneq ($(CONFIG_ICE_OPEN),y)
+$(eval $(call BuildPackage,ice-client-guest))
+$(eval $(call BuildPackage,ice-client-camerawatch))
+$(eval $(call BuildPackage,ice-client-openvpn))
+$(eval $(call BuildPackage,ice-client-anyfi))
+$(eval $(call BuildPackage,ice-client-netrounds))
+$(eval $(call BuildPackage,ice-client-logreader))
+$(eval $(call BuildPackage,ice-client-fileme))
+$(eval $(call BuildPackage,ice-client-example))
+$(eval $(call BuildPackage,ice-client-iperf))
+$(eval $(call BuildPackage,ice-client-rshell))
+$(eval $(call BuildPackage,ice-client-rework))
+$(eval $(call BuildPackage,ice-client-sip))
+$(eval $(call BuildPackage,ice-client-monitor))
+$(eval $(call BuildPackage,ice-client-gigaset))
+$(eval $(call BuildPackage,ice-client-texec))
+$(eval $(call BuildPackage,ice-client-bcmspeedmgr))
+endif
--- a/icgroupd/Makefile
+++ b/icgroupd/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2016 Inteno Broadband AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
--- a/icwmp/Config_cwmp.in
+++ b/icwmp/Config_cwmp.in
@@ -15,13 +15,33 @@ config CWMP_ACS_HDM
 	bool "HDM"
 endchoice

+choice
+	prompt "Select Data Model"
+	default tr098
+
+config DATAMODEL_TR098
+	bool "TR-098"
+
+config DATAMODEL_TR181
+	bool "TR-181"
+endchoice
+
 config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y

+choice
+	prompt "enable xmpp feature"
+	default disable
+
+config XMPP_DISABLE
+	bool "disable"
+
+config XMPP_ENABLE
+	bool "enable"
+endchoice
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
-    
-endif

+endif
--- a/icwmp/Makefile
+++ b/icwmp/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2012 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,17 +8,15 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-12-28
+PKG_VERSION:=3.0-2016-07-07
 PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b3c9b384ccf9d48a9b4dac953586f5230cfd6fc2
+PKG_SOURCE_VERSION:=6fac1df3418d727388162d5e006c7a756c9ff8d2
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING

 PKG_CONFIG_DEPENDS:= \
 	CONFIG_CWMP_ACS_MULTI \
@@ -32,53 +30,11 @@ CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)

 include $(INCLUDE_DIR)/package.mk

-define Package/icwmp_stun
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR-069 stun Client
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json
-endef
-
-define Package/icwmp_xmpp
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR-069 xmpp feature
-  DEPENDS:=+libuci +libubox +libexpat +libstrophe
-endef
-
-define Package/icwmp_twamp
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR-069 twamp feature
-  DEPENDS:=+libuci
-endef
-
-define Package/icwmp_udpechoserver
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR-069 udpechoserver feature
-  DEPENDS:=+libuci
-endef
-
-define Package/icwmp_bulkdata
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=TR-069 BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm
-endef
-
-define Package/icwmp-tr098
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=CWMP client for TR-098 Data Model
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl +libtr098
-endef
-
 define Package/icwmp/Default
  SECTION:=utils
  CATEGORY:=Utilities
  TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libbbfdm
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libexpat +curl
 endef

 define Package/icwmp/description
@@ -100,7 +56,7 @@ define Package/icwmp-zstream
 endef

 define Package/icwmp-zstream/config
-	source "$(SOURCE)/Config_cwmp.in"
+	source "$(SOURCE)/Config.in"
 endef

 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
@@ -113,11 +69,6 @@ endif
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ

-ifeq ($(CONFIG_PACKAGE_icwmp-tr098),y)
-CONFIGURE_ARGS += \
-	--enable-icwmp_tr098
-endif
-
 ifneq ($(CWMP_REVISION)_,_)
 ifneq ($(CWMP_REVISION),exported)
 ifneq ($(CWMP_REVISION),Unversioned directory)
@@ -134,7 +85,10 @@ CONFIGURE_ARGS += \
 	--with-uci-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-	
+
+CONFIGURE_ARGS += $(if $(CONFIG_DATAMODEL_TR181),--enable-datamodel=tr181,--enable-datamodel=tr098)
+CONFIGURE_ARGS += $(if $(CONFIG_XMPP_ENABLE),--enable-xmpp=enable,--enable-xmpp=disable)
+
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \
@@ -172,70 +126,20 @@ define Package/icwmp-$(BUILD_VARIANT)/install
 	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/* $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
 ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(INSTALL_DIR) $(1)/usr/share/icwmp
 	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
 	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/iwepkeygen $(1)/usr/sbin/iwepkeygen
 endif
-	$(CP) ./files/* $(1)/
-endef
-
-define Package/icwmp-tr098/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/bin/icwmp_tr098d $(1)/usr/sbin
-endef
-
-define Package/icwmp_stun/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_stund $(1)/usr/sbin/icwmp_stund
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_stund $(1)/etc/init.d/icwmp_stund
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_stun $(1)/etc/config
-endef
-
-define Package/icwmp_xmpp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_xmppd $(1)/usr/sbin/icwmp_xmppd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
-	$(CP) ./xmpp-files/* $(1)/
-endef
-
-define Package/icwmp_udpechoserver/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
-endef
-
-define Package/icwmp_twamp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_twampd $(1)/usr/sbin/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_twampd $(1)/etc/init.d/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
-endef
-
-define Package/icwmp_bulkdata/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_bulkdatad $(1)/usr/sbin/icwmp_bulkdatad
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_bulkdatad $(1)/etc/init.d/icwmp_bulkdatad
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_bulkdata $(1)/etc/config
 endef

 define Package/icwmp-$(BUILD_VARIANT)/postinst
@@ -257,11 +161,6 @@ define Package/icwmp-$(BUILD_VARIANT)/prerm
 	exit 0
 endef

+
 $(eval $(call BuildPackage,icwmp-curl))
-$(eval $(call BuildPackage,icwmp_stun))
-$(eval $(call BuildPackage,icwmp_xmpp))
-$(eval $(call BuildPackage,icwmp_udpechoserver))
-$(eval $(call BuildPackage,icwmp_twamp))
-$(eval $(call BuildPackage,icwmp_bulkdata))
-$(eval $(call BuildPackage,icwmp-tr098))
-#$(eval $(call BuildPackage,icwmp-zstream))
+$(eval $(call BuildPackage,icwmp-zstream))
--- a/icwmp/files/etc/hotplug.d/iface/90-icwmp
+++ b/icwmp/files/etc/hotplug.d/iface/90-icwmp
@@ -1,87 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-[ -f /etc/config/cwmp ] || exit 0
-
-handle_icwmp_restart() {
-	[ -f /tmp/switching_mode ] && exit 0
-	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
-
-	[ "$INTERFACE" == "loopback" ] && exit 0
-
-	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" == "1" ] && exit 0
-
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" == "none" ] && exit 0
-
-	local ifname="$(uci -q get network.$INTERFACE.ifname)"
-	[ "${ifname:0:1}" == "@" ] && exit 0
-
-	mkdir -p /tmp/ipv4
-
-	network_flush_cache
-
-	local previpaddr=""
-	local curipaddr=""
-	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-	previpaddr=$(cat $ipaddrfile 2>/dev/null)
-	network_get_ipaddr curipaddr $INTERFACE
-	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-	local prevgateway=""
-	local curgateway=""
-	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-	prevgateway=$(cat $gatewayfile 2>/dev/null)
-	network_get_gateway curgateway $INTERFACE
-	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-	local prevsubnets=""
-	local cursubnets=""
-	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-	prevsubnets=$(cat $subnetsfile 2>/dev/null)
-	network_get_subnets cursubnets $INTERFACE
-	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-	local prevdnsservers=""
-	local curdnsservers=""
-	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
-	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
-	network_get_dnsserver curdnsservers $INTERFACE
-	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
-
-	local prevdev=""
-	local curdev=""
-	local devfile=/tmp/ipv4/$INTERFACE-dev
-	prevdev=$(cat $devfile 2>/dev/null)
-	network_get_device curdev $INTERFACE
-	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
-
-	local prevopt43url=""
-	local curopt43url=""
-	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
-	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
-	curopt43url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
-	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
-
-	[ \
-		"$prevdev" == "$curdev" -a \
-		"$previpaddr" = "$curipaddr" -a \
-		"$prevgateway" = "$curgateway" -a \
-		"$prevsubnets" = "$cursubnets" -a \
-		"$prevdnsservers" = "$curdnsservers" \
-	] && {
-		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
-		[ -z "$prevopt43url" ] && exit 0
-	}
-
-	/etc/init.d/icwmpd reload &
-}
-
-handle_icwmp_restart
--- a/icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts
+++ b/icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts
@@ -1,54 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_cwmp_reqopts() {
-	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
-	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
-	local discovery=0
-	case $dhcp_discovery in
-		enable|1) discovery=1 ;;
-	esac
-
-	local newreqopts=
-	local baseopts=
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local tropts="43"
-	local oldreqopts="$reqopts"
-	local ropt iopt
-	for ropt in $reqopts; do
-		case $ropt in
-			43) ;;
-			*) baseopts="$baseopts $ropt" ;;
-		esac
-	done
-	ropt=""
-	reqopts="$baseopts $tropts"
-	for ropt in $reqopts; do
-		case $ropt in
-			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
-			*) newreqopts="$newreqopts $ropt" ;;
-		esac
-	done
-	if [ "$proto" == "dhcp" ]; then
-		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		[ "$newreqopts" == "$oldreqopts" ] && return
-		uci -q set network.$wan.reqopts="$newreqopts"
-		uci commit network
-	fi
-}
-
-regenerate_ssl_link(){
-	local cert_dir="/etc/ssl/certs"
-	local all_file=$(ls $cert_dir/*.pem)
-	for cfile in $all_file
-	do
-		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
-	done
-}
-
-set_cwmp_reqopts
-regenerate_ssl_link
--- a/icwmp/xmpp-files/etc/hotplug.d/iface/91-icwmp_xmpp
+++ b/icwmp/xmpp-files/etc/hotplug.d/iface/91-icwmp_xmpp
@@ -1,21 +0,0 @@
-#!/bin/sh
-
-[ -f /etc/config/cwmp_xmpp ] || exit 0
-
-[ "$ACTION" == "ifup" ] || exit 0
-[ "$INTERFACE" == "loopback" ] && exit 0
-
-local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-local islan="$(uci -q get network.$INTERFACE.is_lan)"
-[ "$islan" == "1" ] && exit 0
-
-local proto="$(uci -q get network.$INTERFACE.proto)"
-[ "$proto" == "none" ] && exit 0
-
-local ifname="$(uci -q get network.$INTERFACE.ifname)"
-[ "${ifname:0:1}" == "@" ] && exit 0
-
-/etc/init.d/icwmp_xmppd reload &
-
--- a/ieee1905/Makefile
+++ b/ieee1905/Makefile
@@ -1,55 +0,0 @@
-#
-# Copyright (C) 2019 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ieee1905
-PKG_VERSION:=1.1.4
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5f3cdad5c0ee41464b5699565e0175611dc9d070
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ieee1905
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=IEEE1905 handler
-  DEPENDS:= +ubox +libpicoevent +libpcap +libopenssl +libuci +libjson-c
-endef
-
-define Package/ieee1905/description
- IEEE1905 stack with extended functionalities.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE \
-	-DSEND_EMPTY_TLVS \
-	-DFIX_BROKEN_TLVS \
-	-DSPEED_UP_DISCOVERY \
-	-DREGISTER_MULTIAP_FEATURE \
-	-DDO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS
-	#-DREGISTER_EXTENSION_BBF
-
-#define Build/Prepare
-#        $(CP) -rf ./ieee1905/* $(PKG_BUILD_DIR)/
-#endef
-
-define Package/ieee1905/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_BIN) ./files/etc/init.d/ieee1905 $(1)/etc/init.d/ieee1905
-	$(INSTALL_DATA) ./files/etc/config/ieee1905 $(1)/etc/config/ieee1905
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ieee1905d $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libs/*.so $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,ieee1905))
--- a/ieee1905/files/etc/config/ieee1905
+++ b/ieee1905/files/etc/config/ieee1905
@@ -1,43 +0,0 @@
-config ieee1905
-        option enabled '1'
-        option debug  true
-
-config meshcomms 'global'
-        option enabled '1'
-        option basemacint 'wan'
-        option mapall true
-#        option registrar 'wl0'
-        option debug_level  2
-        option port  8888
-        option cmdu_event false
-        option discovery_timer 300
-
-#config al-iface
-#        option enabled '1'
-#        option ifname 'br-lan'
-#        option media '802_3U'
-#        option manufacturer_name 'Broadcom'
-#        option model_name 'Eth EG400'
-#        option model_number '00002'
-#        option device_name 'EG400R1'
-#        option serial_number '1234'
-
-#config al-iface
-#        option enabled '1'
-#        option ifname 'wl0'
-#        option media '802_11N5'
-#        option manufacturer_name 'Broadcom'
-#        option model_name 'WIFI EG400'
-#        option model_number '00001'
-#        option device_name 'EG400R1'
-#        option serial_number '1235'
-
-#config al-iface
-#        option enabled '1'
-#        option ifname 'wl1'
-#        option media '802_11N2'
-#        option manufacturer_name 'Broadcom'
-#        option model_name 'WIFI EG400'
-#        option model_number '00001'
-#        option device_name 'EG400R1'
-#        option serial_number '1236'
--- a/ieee1905/files/etc/init.d/ieee1905
+++ b/ieee1905/files/etc/init.d/ieee1905
@@ -1,211 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/ieee1905d
-MESH_CONF=/tmp/meshcomms.config
-INTERFACE=""
-
-validate_global_section()
-{
-	uci_validate_section ieee1905 meshcomms "${1}" \
-		'enabled:bool:false' \
-		'basemacint:string:wan' \
-		'almac:string' \
-		'registrar:string' \
-		'mapall:bool:true' \
-		'debug_level:uinteger:5' \
-		'port:port:8888' \
-		'cmdu_event:bool:true' \
-		'discovery_timer:uinteger:60'
-}
-
-validate_ieee1905_section()
-{
-	uci_validate_section ieee1905 ieee1905 "${1}" \
-		'debug:bool:true' \
-		'enabled:bool:true'
-}
-
-get_device_name() {
-	local device
-	# Get wan L3 interface
-	ubus list |grep -iq network.interface.${1}
-	if [ "$?" -eq 0 ]; then
-		json_load "$(ubus -t 2 call network.interface.${1} status)"
-		json_get_var device device
-		echo ${device}
-	fi
-}
-
-get_interface_mac() {
-	local l3 basemac
-	l3=$(get_device_name ${1})
-	if [ -n ${l3} ]; then
-		json_load "$(ubus -t 2 call network.device status "{\"name\":\"${l3}\"}")"
-		json_get_var basemac macaddr
-	fi
-	local first=0x$(echo $basemac |cut -d : -f 1)
-	local rest=$(echo $basemac |cut -d : -f 2-)
-	# Set local bit
-	first=$((first|2))
-	first=$(printf "%02x" $first)
-	basemac="${first}:${rest}"
-	echo ${basemac}
-}
-
-validate_al_section()
-{
-	uci_validate_section ieee1905 al-iface "${1}" \
-		'enabled:bool:false' \
-		'ifname:string' \
-		'media:string:eth' \
-		'manufacturer_name:string:iopsys' \
-		'model_name:string' \
-		'model_number:string' \
-		'device_name:string' \
-		'serial_number:string'
-}
-
-configure_interface()
-{
-	local ifname media enabled manufacturer_name model_name model_number device_name serial_number
-	validate_al_section ${1} || {
-		echo "Validation of global section failed"
-		return 1;
-	}
-
-	if [ ${enabled} -eq 0 ]; then
-		return;
-	fi
-
-	if [ -z ${INTERFACE} ]; then
-		INTERFACE=${ifname}
-	else
-		INTERFACE="${INTERFACE},${ifname}"
-	fi
-
-	local uuid=$(cat /proc/sys/kernel/random/uuid)
-	local ifindex=$(cat /sys/class/net/${ifname}/upper_*/ifindex 2>/dev/null)
-	if [ -z ${ifindex} ]; then
-		ifindex=$(cat /sys/class/net/${ifname}/ifindex)
-	fi
-
-	echo "Interface ${ifname} ifindex |${ifindex}|" >>/dev/console
-
-	json_add_object
-	json_add_string ifname ${ifname}
-	json_add_string media ${media}
-	json_add_string manufacturer_name ${manufacturer_name}
-	json_add_string model_name ${model_name}
-	json_add_string model_number ${model_number}
-	json_add_string device_name ${device_name}
-	json_add_string serial_number ${serial_number}
-	json_add_string uuid ${uuid}
-	json_add_int ifindex ${ifindex}
-	json_close_object
-}
-
-configure_meshcomms()
-{
-	local enabled almac basemacint mapall debug_level port l3device basemac intf registrar cmdu_event discovery_timer
-
-	validate_global_section global || {
-		echo "Validation of global section failed"
-		return 1;
-	}
-
-	if [ -z ${almac} ]; then
-		basemac=$(get_interface_mac ${basemacint})
-	else
-		basemac=${almac}
-	fi
-
-
-	local fname cname model cUrl
-	fname=$(db get hw.board.boardId)
-	cname=$(db get hw.board.iopVerCustomer)
-	model=$(db get hw.board.routerModel)
-	cUrl="http://192.168.1.1"
-
-	json_init
-	# fill the al-iface info
-	json_add_array al-iface
-	config_foreach configure_interface al-iface
-	json_close_array
-	json_add_object deviceInfo
-	json_add_string friendly_name ${fname}
-	json_add_string manufacturer_name ${cname}
-	json_add_string model ${model}
-	json_add_string control_url ${cUrl}
-	json_close_object
-	json_add_object meshcomms
-	json_add_int enabled ${enabled}
-	json_add_string mac ${basemac}
-	json_add_string interfaces ${INTERFACE}
-	json_add_int map ${mapall}
-	json_add_string registrar ${registrar}
-	json_add_int debug_level ${debug_level}
-	json_add_int port ${port}
-	json_add_int cmdu_event ${cmdu_event}
-	json_add_int discovery_timer ${discovery_timer}
-	json_close_object
-
-	json_dump >${MESH_CONF}
-
-}
-
-configure_ieee1905()
-{
-	local enabled debug
-
-	validate_ieee1905_section ${1} || {
-		echo "Validation of ieee1905 section failed"
-		exit 1;
-	}
-
-	if [ ${debug} -eq 1 ]; then
-		# Forward stdout of the command to logd
-		procd_set_param stdout 1
-		# Same for stderr
-		procd_set_param stderr 1
-	fi
-
-	if [ ${enabled} -ne 1 ]; then
-		exit 0;
-	fi
-}
-
-configure_network() {
-	[ -f ${MESH_CONF} ] && rm ${MESH_CONF}
-
-	ebtables -L FORWARD|grep -iqE "1:80:C2:(0)+:(0)+:13.*-j.*DROP"
-	if [ "$?" -ne 0 ]; then
-		echo "Applying drop rule to drop pkts forwared by kernel to 1905.1 multicast mac"
-		ebtables -A FORWARD -d 01:80:c2:00:00:13 -j DROP
-	fi
-
-	config_load ieee1905
-	config_foreach configure_ieee1905 ieee1905
-	config_foreach configure_meshcomms meshcomms
-}
-
-start_service() {
-	procd_open_instance ieee1905
-	procd_set_param command ${PROG}
-	configure_network
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger "network"
-	procd_add_reload_trigger "netmode"
-}
--- a/ifbt/Makefile
+++ b/ifbt/Makefile
@@ -1,55 +0,0 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ifbt
-PKG_VERSION:=0.2
-
-PKG_SOURCE_VERSION:=6a279efa5046ace0681a1d0e79592a120f80e171
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=README
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-TARGET_PLATFORM:=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_INTEL
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-TARGET_PLATFORM:=-DIOPSYS_MEDIATEK
-else
-$(info (UNEXPECTED CONFIG TARGET))
-endif
-
-export TARGET_PLATFORM
-
-define Package/ifbt
-	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c
-	TITLE:=Fast BSS Transition
-endef
-
-define Package/ifbt/description
-	ifbt is Iopsys application for fast BSS transition
-endef
-
-define Package/ifbt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ifbt))
--- a/ifsi/Makefile
+++ b/ifsi/Makefile
@@ -0,0 +1,39 @@
+#
+# Copyright (C) 2015 Inteno
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ifsi
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+define Package/ifsi
+  CATEGORY:=Utilities
+  DEPENDS:=+ubus +libubox
+  TITLE:=Inteno Functional Script Interface
+endef
+
+define Package/ifsi/description
+	Inteno Functional Script Interface
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+define Package/ifsi/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifsi $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ifsi))
--- a/ifsi/src/Makefile
+++ b/ifsi/src/Makefile
@@ -0,0 +1,17 @@
+CC		= gcc
+CFLAGS		= -g -Wall
+LOCLIBS		= 
+LIBS		= -lubus -lubox -lblobmsg_json
+OBJS		= ifsi.o
+SRCS		= ifsi.c
+LIBSRCS		= 
+ISRCS		= 
+
+all: ifsi
+
+ifsi: ${OBJS}
+	${CC} ${LDFLAGS} ${LIBSRCS} -o ifsi ${OBJS} ${LIBS}
+
+clean:
+	rm -f ifsi *.o
+
--- a/ifsi/src/ifsi.c
+++ b/ifsi/src/ifsi.c
@@ -0,0 +1,74 @@
+/*
+ * ifsi -- Inteno functional script interface
+ *
+ * Copyright (C) 2012-2013 Inteno Broadband Technology AB. All rights reserved.
+ *
+ * Author: dev@inteno.se
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <unistd.h>
+
+#include <libubox/blobmsg.h>
+#include <libubox/blobmsg_json.h>
+#include <libubox/uloop.h>
+
+#include <libubus.h>
+
+static struct ubus_context *ctx;
+static struct ubus_event_handler event_listener;
+static struct blob_buf b;
+
+
+static void receive_event(struct ubus_context *ctx, struct ubus_event_handler *ev,
+			  const char *type, struct blob_attr *msg)
+{
+	char *str;
+	uint32_t id;
+
+	str = blobmsg_format_json(msg, true);
+	fprintf(stdout, "I got %s event %s\n", type, str);
+	free(str);
+}
+
+int main(int argc, char **argv)
+{
+	const char *ubus_socket = NULL;
+	int ret;
+
+	uloop_init();
+
+	ctx = ubus_connect(ubus_socket);
+	if (!ctx) {
+		fprintf(stderr, "Failed to connect to ubus\n");
+		return 1;
+	}
+
+	ubus_add_uloop(ctx);
+
+	event_listener.cb = receive_event;
+	ret = ubus_register_event_handler(ctx, &event_listener, "*");
+	if (ret)
+		fprintf(stderr, "Couldn't register to router events\n");
+
+	uloop_run();
+
+	ubus_free(ctx);
+	uloop_done();
+
+	return 0;
+}
+
--- a/imonitor/Makefile
+++ b/imonitor/Makefile
@@ -1,44 +0,0 @@
-#
-# Copyright (C) 2018 iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=imonitor
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-PKG_SOURCE_PROTO=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
-PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/imonitor
-	CATEGORY:=Utilities
-	TITLE:=iopsysWrt process supervisor
-	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
-endef
-
-define Package/imonitor/description
-	imonitor is a process supervisor or a process control system similar to the Supervisor (http://supervisord.org/)
-endef
-
-define Package/imonitor/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/imonitor $(1)/usr/bin/
-	$(INSTALL_DIR) $(1)/etc/config
-endef
-
-$(eval $(call BuildPackage,imonitor))
--- a/imonitor/files/etc/config/imonitor
+++ b/imonitor/files/etc/config/imonitor
@@ -1,9 +0,0 @@
-config monitor
-	option app 'test'
-	option test 'echo test'
-	option stream 'stdout'
-	option string_match 'TEST'
-	option execute 'echo executing test'
-	option interval '10'
-	option nr_tests '2'
-
--- a/imonitor/files/etc/init.d/imonitor
+++ b/imonitor/files/etc/init.d/imonitor
@@ -1,29 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# Start the imonitor
-#
-
-START=99
-STOP=01
-
-USE_PROCD=1
-NAME=imonitor
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "imonitor"
-	procd_set_param stdout 1
-        procd_set_param stderr 1
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop() {
-	service_stop imonitor
-}
-
-reload_service() {
-	stop
-	start
-}
-
--- a/inbd/Makefile
+++ b/inbd/Makefile
@@ -1,56 +0,0 @@
-#
-# Copyright (C) 2016 iopsys
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=inbd
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=53ca7f58edb87976b5897ccaf487bb0cbbf39d07
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inbd
-	CATEGORY:=Utilities
-	TITLE:=iopsys Netlink Bridge Daemon
-	URL:=
-	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
-endef
-
-define Package/inbd/description
-	Application handling netlink messages from kernel and sending them out on ubus.
-endef
-
-define Package/inbd/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inbd $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/inbd $(1)/etc/init.d/
-endef
-
-$(eval $(call BuildPackage,inbd))
--- a/inotify-tools/Makefile
+++ b/inotify-tools/Makefile
@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=inotify-tools
+PKG_VERSION:=3.14
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=1df9af4d6cd0f4af4b1b19254bcf056aed4ae395
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/rvoicilas/inotify-tools.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/inotify-tools
+	CATEGORY:=Utilities
+	TITLE:=Tools to trace filesystem events.
+	URL:=
+endef
+
+define Package/inotify-tools/description
+	Tools to trace filesystem events.
+endef
+
+define Package/inotify-tools/install
+	$(INSTALL_DIR) $(1)/usr
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(CP) ./files/* $(1)/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0.4.1 $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0 $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywait $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywatch $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,inotify-tools))
--- a/inotify-tools/files/usr/bin/iop_write_monitor
+++ b/inotify-tools/files/usr/bin/iop_write_monitor
@@ -0,0 +1,13 @@
+#! /bin/sh
+
+# is the real root mounted ?
+if [ ! -f /tmp/inotify_real_root/etc/preinit ]
+then
+	ubivol=$( cat /proc/cmdline  | sed -e "s/.*root=\(ubi:rootfs_.\).*/\1/" )
+	mkdir /tmp/inotify_real_root
+	mount -t ubifs $ubivol /tmp/inotify_real_root
+fi
+
+inotifywait -r -m -e modify -e create -e attrib -e delete -e move /tmp/inotify_real_root
+
+
--- a/iop/Makefile
+++ b/iop/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys
+# Copyright (C) 2006-2011 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,7 +10,6 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=iop
 PKG_VERSION:=1.0
 PKG_RELEASE:=0
-PKG_LICENSE:=GPLv2

 include $(INCLUDE_DIR)/package.mk

@@ -21,7 +20,7 @@ define Package/iop
 endef

 define Package/iop/description
-	This package contains iopsysWrt SDK utilities
+	This package contains Intenos Iop utilities
 endef

 define Build/Compile
--- a/iop/configs/config
+++ b/iop/configs/config
@@ -3,107 +3,128 @@ CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
+CONFIG_LOCALMIRROR="http://mirror.inteno.se/mirror"
+CONFIG_PACKAGE_4g-support=y
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
+CONFIG_PACKAGE_6tunnel=y
 CONFIG_PACKAGE_alsa-lib=y
+CONFIG_PACKAGE_bind-host=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
-CONFIG_PACKAGE_comgt-directip=y
-CONFIG_PACKAGE_comgt-ncm=y
 CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_easy-qos=y
 CONFIG_PACKAGE_gdb=m
+CONFIG_PACKAGE_gdbserver=m
 CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_glib2=y
+CONFIG_PACKAGE_ice-client=y
+CONFIG_PACKAGE_ice-client-camerawatch=m
+CONFIG_PACKAGE_ice-client-fileme=m
+CONFIG_PACKAGE_ice-client-gigaset=m
+CONFIG_PACKAGE_ice-client-guest=m
+CONFIG_PACKAGE_ice-client-iperf=m
+CONFIG_PACKAGE_ice-client-logreader=m
+CONFIG_PACKAGE_ice-client-monitor=m
+CONFIG_PACKAGE_ice-client-netrounds=m
+CONFIG_PACKAGE_ice-client-rshell=m
+CONFIG_PACKAGE_ice-client-texec=m
+# CONFIG_PACKAGE_icgroupd is not set
 CONFIG_PACKAGE_icwmp-curl=y
-CONFIG_PACKAGE_ifbt=y
-CONFIG_PACKAGE_imonitor=y
-CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_iopupgrade=y
-CONFIG_PACKAGE_ip-full=y
-CONFIG_PACKAGE_iperf3=y
+CONFIG_PACKAGE_iperf-mt=y
 CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_iptables=y
-CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
-CONFIG_PACKAGE_iptables-mod-filter=y
-CONFIG_PACKAGE_iptables-mod-ipopt=y
-# CONFIG_PACKAGE_iwatchdog is not set
+CONFIG_PACKAGE_iup=y
+CONFIG_PACKAGE_iwatchdog=y
 CONFIG_PACKAGE_juci=y
-CONFIG_PACKAGE_juci-config-backup=y
+CONFIG_PACKAGE_juci-broadcom-dsl=y
+CONFIG_PACKAGE_juci-broadcom-ethernet=y
+CONFIG_PACKAGE_juci-broadcom-iptv=y
+CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
+CONFIG_PACKAGE_juci-broadcom-vlan=y
+CONFIG_PACKAGE_juci-broadcom-wl=y
+CONFIG_PACKAGE_juci-broadcom-xdsl=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
 CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
 CONFIG_PACKAGE_juci-dropbear=y
-CONFIG_PACKAGE_juci-easyqos=y
+CONFIG_PACKAGE_juci-ethernet=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
+CONFIG_PACKAGE_juci-inteno-backup=y
+CONFIG_PACKAGE_juci-inteno-multiwan=y
+CONFIG_PACKAGE_juci-inteno-provisioning=y
+CONFIG_PACKAGE_juci-inteno-router=y
+CONFIG_PACKAGE_juci-inteno-qos=y
+CONFIG_PACKAGE_juci-inteno-voice-client=y
+CONFIG_PACKAGE_juci-macdb=y
 CONFIG_PACKAGE_juci-minidlna=y
 CONFIG_PACKAGE_juci-mod-status=y
 CONFIG_PACKAGE_juci-mod-system=y
-CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-natalie-dect=y
 CONFIG_PACKAGE_juci-netmode=y
-CONFIG_PACKAGE_juci-network-device=y
-CONFIG_PACKAGE_juci-network-dsl=y
 CONFIG_PACKAGE_juci-network-netifd=y
-CONFIG_PACKAGE_juci-network-port=y
-CONFIG_PACKAGE_juci-openvpn=y
-CONFIG_PACKAGE_juci-owsd=y
-CONFIG_PACKAGE_juci-realtime-graphs=y
+CONFIG_PACKAGE_juci-printer=y
 CONFIG_PACKAGE_juci-samba=y
+CONFIG_PACKAGE_juci-simple-gui=y
 CONFIG_PACKAGE_juci-snmpd=y
 CONFIG_PACKAGE_juci-sysupgrade=y
+CONFIG_PACKAGE_juci-theme-inteno=y
+CONFIG_PACKAGE_juci-ubus-core=y
 CONFIG_PACKAGE_juci-upnp=y
 CONFIG_PACKAGE_juci-usb=y
-CONFIG_PACKAGE_juci-voice-client=y
-CONFIG_PACKAGE_juci-wifilife=y
-CONFIG_PACKAGE_juci-wireless=y
-CONFIG_PACKAGE_juci-theme-iopsys=y
+CONFIG_PACKAGE_juci-utils=y
+# CONFIG_PACKAGE_kmod-ipt-nathelper is not set
+CONFIG_PACKAGE_kmod-nls-base=y
 CONFIG_PACKAGE_kmod-siit=y
-CONFIG_PACKAGE_libcgroup-daemon=y
-CONFIG_PACKAGE_libcgroup=y
-# CONFIG_PACKAGE_libcgroup-utils is not set
+CONFIG_PACKAGE_layer2interface=y
+CONFIG_PACKAGE_ldd=y
+# CONFIG_PACKAGE_libcgroup=y
+# CONFIG_PACKAGE_libcgroup-daemon=y
 CONFIG_PACKAGE_libdaemon=y
 CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
 CONFIG_PACKAGE_libreadline=y
-CONFIG_PACKAGE_loop-detector=m
 CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
-CONFIG_PACKAGE_mwan3=y
-CONFIG_PACKAGE_nand-utils=y
+CONFIG_PACKAGE_mtd-utils=y
+CONFIG_PACKAGE_mtd-utils-deubinize=y
+CONFIG_PACKAGE_mtd-utils-imagewrite=y
+CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
+CONFIG_PACKAGE_mtd-utils-nanddump=y
+CONFIG_PACKAGE_mtd-utils-ubiattach=y
+CONFIG_PACKAGE_mtd-utils-ubidetach=y
+CONFIG_PACKAGE_mtd-utils-ubimkvol=y
+CONFIG_PACKAGE_mtd-utils-ubinfo=y
+CONFIG_PACKAGE_mtd-utils-ubirmvol=y
+CONFIG_PACKAGE_mtd-utils-ubirsvol=y
+CONFIG_PACKAGE_mtd-utils-ubiupdatevol=y
+CONFIG_PACKAGE_multiwan=y
 CONFIG_PACKAGE_ndisc6=y
-CONFIG_PACKAGE_netmode=y
+CONFIG_PACKAGE_netcheck=y
 CONFIG_PACKAGE_ntfs-3g=y
-CONFIG_PACKAGE_ntpd=y
-CONFIG_PACKAGE_obuspa=y
 CONFIG_PACKAGE_odhcp6c=y
 CONFIG_PACKAGE_odhcpd=y
 CONFIG_PACKAGE_openssl-util=y
-CONFIG_OPENSSL_WITH_COMPRESSION=y
 CONFIG_PACKAGE_openvpn-easy-rsa=y
 CONFIG_PACKAGE_openvpn-openssl=y
+CONFIG_PACKAGE_p910nd=y
 CONFIG_PACKAGE_peripheral_manager=y
 CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
-CONFIG_PACKAGE_ppp-mod-pppoe=y
 CONFIG_PACKAGE_ppp-mod-pppol2tp=y
-CONFIG_PACKAGE_ppp-mod-pptp=y
 CONFIG_PACKAGE_ppp-multilink=y
-# CONFIG_PACKAGE_ppp is not set
-# CONFIG_PACKAGE_qos-scripts is not set
+CONFIG_PACKAGE_qos-scripts=y
+CONFIG_PACKAGE_qrencode=y
 CONFIG_PACKAGE_questd=y
 CONFIG_PACKAGE_rdisc6=y
 CONFIG_PACKAGE_rdnssd=y
-CONFIG_PACKAGE_relayd=y
 CONFIG_PACKAGE_resolveip=y
 CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_rulengd=y
 CONFIG_PACKAGE_samba3=y
 CONFIG_PACKAGE_samba3-nmbd=y
 CONFIG_PACKAGE_snmpd=y
@@ -113,51 +134,36 @@ CONFIG_PACKAGE_tcpdump=y
 CONFIG_PACKAGE_terminfo=y
 CONFIG_PACKAGE_tptest=y
 CONFIG_PACKAGE_traceroute6=y
-CONFIG_PACKAGE_umbim=y
-CONFIG_PACKAGE_uqmi=y
 CONFIG_PACKAGE_usb-modeswitch=y
 CONFIG_PACKAGE_usbreset=y
-CONFIG_PACKAGE_uspd=y
-CONFIG_PACKAGE_wget=y
-CONFIG_PACKAGE_wwan=y
-CONFIG_PACKAGE_libwifi=y
-CONFIG_PACKAGE_wifilife=y
-CONFIG_PACKAGE_wifimngr=y
 CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_zoneinfo-core=y
 CONFIG_PACKAGE_zoneinfo-europe=y
-CONFIG_TARGET_CUSTOMER="IOPSYS"
+CONFIG_TARGET_CUSTOMER="INT"
+CONFIG_TARGET_ROOTFS_JFFS2=y
 CONFIG_TARGET_ROOTFS_TARGZ=y
 # CONFIG_USE_SSTRIP is not set
 CONFIG_USE_STRIP=y
 CONFIG_BUILD_LOG=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
-CONFIG_BUSYBOX_CONFIG_ARPING=y
 CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
-CONFIG_BUSYBOX_CONFIG_CTTYHACK=y
 CONFIG_BUSYBOX_CONFIG_DELUSER=y
 # CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
 CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
 CONFIG_BUSYBOX_CONFIG_HTTPD=y
-# CONFIG_BUSYBOX_CONFIG_INSMOD is not set
-# CONFIG_BUSYBOX_CONFIG_MODINFO is not set
-# CONFIG_BUSYBOX_CONFIG_MODPROBE is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODPROBE_BLACKLIST=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
-CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
-CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+CONFIG_BUSYBOX_CONFIG_INSMOD=y
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
-# CONFIG_BUSYBOX_CONFIG_LSMOD is not set
+CONFIG_BUSYBOX_CONFIG_LSMOD=y
 CONFIG_BUSYBOX_CONFIG_LSPCI=y
 CONFIG_BUSYBOX_CONFIG_LSUSB=y
 CONFIG_BUSYBOX_CONFIG_MICROCOM=y
-# CONFIG_BUSYBOX_CONFIG_RMMOD is not set
+CONFIG_BUSYBOX_CONFIG_RMMOD=y
 CONFIG_BUSYBOX_CONFIG_STTY=y
+CONFIG_BUSYBOX_CONFIG_TASKSET=y
 CONFIG_BUSYBOX_CONFIG_TFTP=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
@@ -171,35 +177,18 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
 # CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY is not set
 # CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
-# CONFIG_BUSYBOX_CONFIG_WGET is not set
 # CONFIG_BUSYBOX_CONFIG_LOGIN_SCRIPTS is not set
 # CONFIG_BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD is not set
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
-# CONFIG_BUSYBOX_CONFIG_NTPD is not set
-CONFIG_BUSYBOX_CONFIG_MOUNTPOINT=y
-CONFIG_BUSYBOX_CONFIG_RUN_PARTS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_RUN_PARTS_FANCY=y
 CONFIG_LIBCURL_CRYPTO_AUTH=y
-# CONFIG_LIBCURL_MBEDTLS is not set
-CONFIG_LIBCURL_OPENSSL=y
 CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_SAMBA3_CONFIG_NO_PRINTING is not set
-# CONFIG_SIGNED_PACKAGES is not set
-CONFIG_KERNEL_DEVTMPFS=y
-CONFIG_KERNEL_DEVTMPFS_MOUNT=y
-# CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_LOCALMIRROR="http://download.iopsys.eu/iopsys/mirror/"
-
-# Generation of /etc/banner.
-CONFIG_IMAGEOPT=y
-CONFIG_VERSIONOPT=y
-CONFIG_VERSION_MANUFACTURER="iopsysWrt"
-CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
--- a/iop/configs/luci.diff
+++ b/iop/configs/luci.diff
@@ -0,0 +1,38 @@
+CONFIG_PACKAGE_luci=y
+CONFIG_PACKAGE_luci-mod-admin-core=y
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-app-ddns=y
+CONFIG_PACKAGE_luci-app-dslstats=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-iup=y
+CONFIG_PACKAGE_luci-app-mcpd=y
+CONFIG_PACKAGE_luci-app-minidlna=y
+CONFIG_PACKAGE_luci-app-multiwan=y
+CONFIG_PACKAGE_luci-app-p910nd=y
+CONFIG_PACKAGE_luci-app-parental-control=y
+CONFIG_PACKAGE_luci-app-port-management=y
+CONFIG_PACKAGE_luci-app-power-mgmt=y
+CONFIG_PACKAGE_luci-app-samba=y
+CONFIG_PACKAGE_luci-app-sfp=y
+CONFIG_PACKAGE_luci-app-snmp=y
+CONFIG_PACKAGE_luci-app-speedtest=y
+CONFIG_PACKAGE_luci-app-upnp=y
+CONFIG_PACKAGE_luci-app-voice=y
+CONFIG_PACKAGE_luci-theme-base=y
+CONFIG_PACKAGE_luci-theme-bootstrap=y
+CONFIG_PACKAGE_luci-i18n-english=y
+CONFIG_PACKAGE_luci-proto-3g=y
+CONFIG_PACKAGE_luci-proto-4g=y
+CONFIG_PACKAGE_luci-proto-core=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-sgi-cgi=y
+CONFIG_PACKAGE_luci-lib-core=y
+CONFIG_PACKAGE_luci-lib-core_source=y
+CONFIG_PACKAGE_luci-lib-ipkg=y
+CONFIG_PACKAGE_luci-lib-json=y
+CONFIG_PACKAGE_luci-lib-nixio=y
+CONFIG_PACKAGE_luci-lib-nixio_notls=y
+CONFIG_PACKAGE_luci-lib-sys=y
+CONFIG_PACKAGE_luci-lib-web=y
+
--- a/iop/iop.completion
+++ b/iop/iop.completion
@@ -1,94 +0,0 @@
-# Bash completion for IOPSYS "./iop" utility
-# Source this file into the curent shell or copy it into
-# /usr/share/bash-completion/completions/ and start a new shell
-# for automatic availability.
-
-_iop_get_profiles()
-{
-    find feeds/targets/iopsys-*/ -name '*.diff' \
-        |awk -F'/' '{print$NF}' \
-        |awk -F. '{print$1}'
-}
-
-_iop_get_models()
-{
-    find feeds/targets/iopsys-*/ -mindepth 1 -maxdepth 1 -type d \
-        |awk -F'/' '{print$NF}' \
-        |egrep '^(cg|dg|eg|vg|vox)[0-9]'
-}
-
-_iop_get_model_customers()
-{
-    local model=$1
-    find customerconfigs/$prev -mindepth 1 -maxdepth 1 -type d \
-        |awk -F'/' '{print$NF}'
-}
-
-_iop() 
-{
-    local cur prev iopcmds
-
-    COMPREPLY=()
-    cur="${COMP_WORDS[COMP_CWORD]}"
-    prev="${COMP_WORDS[COMP_CWORD-1]}"
-
-    iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
-             feeds_update genconfig generate_tarballs install_key \
-             scp_changes setup_host ssh_install_key status \
-             update_package update_feed_branches ssh_upgrade"
-
-    if [ $COMP_CWORD -eq 1 ] ; then
-
-        # Complete the primary iop command
-        COMPREPLY=($(compgen -W "${iopcmds}" -- ${cur}))  
-        return 0
-
-    else
-    
-        # Complete the arguments to "iopcmds"
-        local cmd="${COMP_WORDS[1]}"
-        case "$cmd" in
-
-            extract_core)
-                if [ "$prev" == "-e" ] ; then
-                    _filedir -d
-                else
-                    COMPREPLY=( $(compgen -W "-e -h" -- ${cur}) )
-                fi
-                return 0
-                ;;
-
-            genconfig)
-                if [ "$prev" == "-p" ] ; then
-                    local profiles=$(_iop_get_profiles)
-                    COMPREPLY=( $(compgen -W "juci $profiles" -- ${cur}) )
-                elif [[ $cur == -* ]] ; then
-                    COMPREPLY=( $(compgen -W "-c -h -p -s -t -u -v" -- ${cur}) )
-                else
-                    local models=$(_iop_get_models)
-                    if echo $models |grep -qw -- $prev ; then
-                        local customers=$(_iop_get_model_customers $prev)
-                        COMPREPLY=( $(compgen -W "$customers" -- ${cur}) )
-                    else
-                        COMPREPLY=( $(compgen -W "$models" -- ${cur}) )
-                    fi
-                fi
-                return 0
-                ;;
-            ssh_upgrade)
-	        if [ "$prev" == "-f" ] ; then
-		    _filedir
-		else
-		    COMPREPLY=( $(compgen -W "-f -t -i -n -x -b" -- ${cur}) )
-		fi
-	         ;;
-            *)
-                # No arguments or arguments not supported yet
-                ;;
-        esac
-    fi
-}
-
-complete -F _iop ./iop
-complete -F _iop iop
-
--- a/iop/scripts/annexconfig.sh
+++ b/iop/scripts/annexconfig.sh
@@ -1,72 +0,0 @@
-#!/bin/bash
-
-function disable_add_config () {
-	local COPTION="$1"
-
-	HAVE_OPTION=`grep $COPTION .config | wc -l`
-	HAVE_OPTION_DISABLED=`grep "# $COPTION" .config | wc -l`
-	if [ "$HAVE_OPTION" = "1" ]
-	then
-		if [ "$HAVE_OPTION_DISABLED" = "0" ]
-		then
-			sed -i -e "s,$COPTION=y,# $COPTION is not set,g" .config
-		fi
-	else
-		echo "# $COPTION is not set" >> .config
-	fi
-}
-
-function enable_option () {
-	local COPTION="$1"
-#	cat .config| grep DSL
-	sed -i -e "s,# $COPTION is not set,$COPTION=y,g" .config
-#	cat .config| grep DSL
-}
-
-function annexconfig {
-
-	v() {
-		[ "$VERBOSE" -ge 1 ] && echo "$@"
-	}
-
-	local ANNEX="$1"
-
-	disable_add_config CONFIG_TARGET_NO_DSL
-	disable_add_config CONFIG_TARGET_DSL_ANNEX_A
-	disable_add_config CONFIG_TARGET_DSL_ANNEX_B
-	disable_add_config CONFIG_TARGET_DSL_ANNEX_C
-	disable_add_config CONFIG_TARGET_DSL_SADSL
-	disable_add_config CONFIG_TARGET_DSL_GFAST
-
-
-	if [ "$ANNEX" = "no" ]
-	then
-		echo "No DSL"
-		enable_option CONFIG_TARGET_NO_DSL
-	elif [ "$ANNEX" = "a" ]
-	then
-		echo "Annex A"
-		enable_option CONFIG_TARGET_DSL_ANNEX_A
-	elif [ "$ANNEX" = "b" ]
-	then
-		echo "Annex B"
-		enable_option CONFIG_TARGET_DSL_ANNEX_B
-	elif [ "$ANNEX" = "c" ]
-	then
-		echo "Annex C"
-		enable_option CONFIG_TARGET_DSL_ANNEX_C
-	elif [ "$ANNEX" = "sadsl" ]
-	then
-		echo "sadsl"
-		enable_option CONFIG_TARGET_DSL_SADSL
-	elif [ "$ANNEX" = "gfast" ]
-	then
-		echo "G.fast"
-		enable_option CONFIG_TARGET_DSL_GFAST
-	else
-		echo "Only option no,a,b,c,sadsl,gfast supported"
-	fi
-
-}
-
-register_command "annexconfig" "Select configuration annex"
--- a/iop/scripts/build_branch.sh
+++ b/iop/scripts/build_branch.sh
@@ -1,60 +0,0 @@
-#!/bin/sh
-# build_branch
-#./iop build_branch <branch> <board> [<customer>]
-
-function build_branch_usage {
-	echo "usage: $0 build_branch <branch> <board> [<customer>]"
-	echo "example: $0 build_branch devel-new ex400 DEV"
-	echo "example: $0 build_branch_sysupgrade devel-new ex400 DEV 192.168.1.1 -n"
-	set +x
-	exit 1
-}
-
-function branch_exists {
-	local branch=$1
-	[ -z "$branch" ] && return 1
-	git branch | grep -q $branch && return 0
-	return 1
-}
-
-function build_branch {
-	set -x
-	local branch=$1
-	local board=$2
-	local customer=$3
-	[ "$customer" == "INT" ] && customer=""
-
-	if ! branch_exists $branch ; then
-		echo "Branch $branch not found"
-		build_branch_usage
-	fi
-
-time {
-	git fetch origin || build_branch_usage
-	git fetch --all -p || build_branch_usage
-	git checkout $branch || build_branch_usage
-	git pull || exit 1
-	./iop feeds_update || build_branch_usage
-	./iop genconfig -c $board $customer || build_branch_usage
-	make -j 8 || build_branch_usage
-	set +x
-}
-}
-
-function build_branch_sysupgrade {
-	set -x
-	local branch=$1 ; shift
-	local board=$1 ; shift
-	local customer=$1 ; shift
-	local ip=$1 ; shift
-	local opts=$*
-
-time {
-	./iop build_branch $branch $board $customer
-	[ "$?" == "0" ] && ./iop ssh_sysupgrade_latest $ip $opts
-}
-	set +x
-}
-
-register_command "build_branch" "<branch> <board> [<customer>]  Build a <branch> for a <board> [with a <customer> profile]"
-register_command "build_branch_sysupgrade" "<branch> <board> <customer>|INT <ip> [<opts>]  Build a <branch> for a <board> [with a <customer> profile] and sysupgrade [with <opts>] it on the router at <ip>"
--- a/iop/scripts/compile.sh
+++ b/iop/scripts/compile.sh
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-function compile {
-	if [ -z "$1" ]; then
-		echo "Please give a valid package as first argument."
-		return 1
-	fi
-
-	local cpath pck
-	local lpath=$(find package/ -type l -name $1)
-	local dpath=$(find package/ -type d -name $1)
-
-	for pck in $lpath $dpath; do
-		if [ -n "$(ls $pck/Makefile 2>/dev/null)" ]; then
-			cpath=$pck
-			break
-		fi
-	done
-
-	if [ -n "$cpath" ]; then
-		make $cpath/compile V=$2
-	else
-		echo "Package $1 does not exist. Make sure you have installed the necessary feed."
-	fi
-}
-
-register_command "compile" "Compile a specific package: ./iop compile <PACKAGE_NAME> [0-99]; i.e ./iop compile netifd 99"
--- a/iop/scripts/extract_core.sh
+++ b/iop/scripts/extract_core.sh
@@ -1,136 +0,0 @@
-#!/bin/bash
-
-function extract_core {
-	initial_commit=1427738ac4b77f474999ae21af1a8b916468df36
-	patch_dir=extract_core_patches
-	topdir=$(pwd)
-
-	# Paths to packages that should be exported.
-	paths+='package/network/config/firewall '
-	paths+='package/network/config/netifd '
-	paths+='package/utils/busybox '
-	paths+='package/system/rpcd '
-	paths+='package/network/services/openvpn '
-
-	function print_usage {
-		echo "Usage: $0 extract_core"
-		echo "  -p <path-to-package> | default"
-		echo "  -r <import-repo>"
-		echo "  -b <import-branch>"
-		echo ""
-		echo "Example: $0 extract_core"
-		echo "  -p package/utils/busybox"
-		echo "  -r feeds/openwrt_core"
-		echo "  -b devel"
-		echo ""
-		echo "Extract all default packages:"
-		echo "$0 extract_core"
-		echo "  -p default"
-		echo "  -r feeds/openwrt_core"
-		echo "  -b devel"
-	}
-
-	function orphan_branch {
-		local branch=$1
-
-		git checkout --orphan $branch
-		git rm -rf --cached *
-		git rm -rf --cached .empty
-		rm -rf *
-		rm -rf .empty
-	}
-
-	function export_core {
-		local path=$1
-
-		echo "Extracting ${path} from core to ${import_repo}:${import_branch}"
-
-		# Generate patches from start of openwrt repo.
-		mkdir -p $patch_dir
-		repo=$(basename $path)
-		dir=$(dirname $path)
-		git format-patch $initial_commit $path -o $patch_dir
-
-		# Remove dirname from patches to commit the packages to the
-		# top directory in the destination repo.
-		ls $patch_dir | while read line; do
-			sdir=$(echo "$dir/" | sed 's/\//\\\//g')
-			sed -i "s/$sdir//g" $patch_dir/$line
-		done
-		
-		cd $import_repo
-		
-		if [ -n "$(git rev-parse -q --verify remotes/origin/$repo)" ]; then
-			# Create temporary branch to apply patches on.
-			# We need to do this as git am does not like it
-			# when patches have already been applied.
-			orphan_branch tmp
-			git am $topdir/$patch_dir/*
-			
-			# Rebase and merge.
-			git rebase origin/$repo
-			git checkout --track -b $repo origin/$repo
-			git merge tmp
-			git br -d tmp
-		else
-			# Remote branch does not exist for packet so create it.
-			orphan_branch $repo
-			git am $topdir/$patch_dir/*
-		fi
-
-		git push origin $repo
-		
-		# Merge the package branch into the main branch.
-		git checkout $import_branch
-		git merge $repo -m "Syncing $repo"
-		git push origin $import_branch
-		git br -d $repo
-		
-		rm -rf $topdir/$patch_dir
-		cd $topdir
-	}
-
-	# Execute user command
-	while getopts "p:r:b:h" opt; do
-		case $opt in
-			p)
-				export_path=${OPTARG}
-				;;
-			r)
-				import_repo=${OPTARG}
-				;;
-			b)
-				import_branch=${OPTARG}
-				;;
-			h)
-				print_usage
-				exit 1
-				;;
-			\?)
-				print_usage
-				exit 1
-				;;
-		esac
-	done
-
-	if [ ! -n "$export_path" ] || [ ! -n "$import_repo" ] || [ ! -n "$import_branch" ]; then
-   		print_usage
-		exit 1
-	fi
-
-	if [ "$export_path" == "default" ]; then
-		echo "Extracting default packages:"
-		for p in $paths; do
-			export_core $p
-
-		done
-	else
-		export_core $export_path
-	fi
-
-	exit 0
-}
-
-register_command "extract_core" "Extract core package to separate feed"
-
-
--- a/iop/scripts/extract_top.sh
+++ b/iop/scripts/extract_top.sh
@@ -1,71 +0,0 @@
-#!/bin/bash
-
-function extract_top {
-	tmp_dir=extract_top_tmp
-
-	# Paths to packages that should be ignored.
-	paths+='package/network/services/dnsmasq '
-	paths+='package/network/config/firewall '
-	paths+='package/network/config/netifd '
-	paths+='package/network/config/qos-scripts '
-	paths+='package/utils/busybox '
-	paths+='package/base-files '
-	paths+='package/system/procd '
-	paths+='package/system/rpcd '
-	paths+='package/network/services/openvpn '
-
-	function extract {
-
-		current_branch=$(git rev-parse --abbrev-ref HEAD)
-		git format-patch $start_commit -o $tmp_dir #> /dev/null
-
-		ls $tmp_dir |
-			while read file; do
-				# Remove feed patches.
-				#			echo $file | grep -i Update-feed > /dev/null && \
-				#				rm $tmp_dir/$file && continue
-				cat $tmp_dir/$file | grep "+++ b/feeds.conf" > /dev/null && \
-					rm $tmp_dir/$file && continue
-				
-				# Remove core patches.
-				for path in $paths; do
-					cat $tmp_dir/$file | grep $path > /dev/null && \
-						rm $tmp_dir/$file && break
-				done
-			done
-
-		git checkout -b ${current_branch}-new $start_commit
-		git am $tmp_dir/*
-		git checkout $current_branch
-		rm -rf $tmp_dir
-	}
-	
-	function print_usage {
-
-		echo "Usage:"
-		echo "  $0 -s <start_commit>"
-	}
-
-	# Execute user command
-	while getopts "s:" opt; do
-		case $opt in
-			s)
-				start_commit=${OPTARG}
-				;;
-			\?)
-				print_usage
-				exit 1
-				;;
-		esac
-	done
-
-	if [ ! -n "$start_commit" ]; then
-   		print_usage
-		exit 1
-	fi
-
-	extract
-
-}
-
-register_command "extract_top" "Extract commits made to top repo"
--- a/iop/scripts/feeds_update.sh
+++ b/iop/scripts/feeds_update.sh
@@ -3,53 +3,54 @@
 function feeds_update {

    developer=0
-    override=1
-    start=$(date -u +'%s');
-    while getopts "n" opt; do
-	case $opt in
-	    n)
-		override=0
-		;;
-	esac
-    done
-

    git remote -v | grep -q http || developer=1

+    #while getopts "d" opt; do
+    #    case $opt in
+    #        d)
+    #	    developer=1
+    #            ;;
+    #        \?)
+    #            echo "Invalid option: -$OPTARG" >&2
+    #            exit 1
+    #            ;;
+    #    esac
+    #done
+
    cp .config .genconfig_config_bak

+    rm -rf package/feeds
+
    #if -d argument is passed, clone feeds with ssh instead of http
    if [ $developer == 1 ]; then
 	./scripts/feeds update -g
    else
 	./scripts/feeds update
    fi
-	./scripts/feeds update -ai

-    # replace core packages with iopsys versions
-    if [ $override == 1 ]; then
-		./scripts/feeds install -f -p openwrt_core -a
-    fi

-    # targets need to be installed explicitly
-    targets="iopsys-brcm63xx-mips iopsys-brcm63xx-arm iopsys-ramips intel_mips"
-    for target in $targets
-    do
-	rm -f target/linux/$target
-	./scripts/feeds install -p targets $target
-    done
+    ./scripts/feeds install -f -p feed_inteno_openwrt -a
+    ./scripts/feeds install -f -p feed_inteno_juci -a
+    ./scripts/feeds install -f -p feed_inteno_packages -a
+    ./scripts/feeds install -f -p feed_inteno_broadcom -a
+    ./scripts/feeds install -f -p feed_inteno_targets iopsys-brcm63xx-mips
+    ./scripts/feeds install -f -p feed_inteno_targets iopsys-brcm63xx-arm
+    ./scripts/feeds install -a 
+    ./scripts/feeds uninstall asterisk18
+    ./scripts/feeds uninstall zstream
+    ./scripts/feeds uninstall mtd-utils
+    ./scripts/feeds install -f -p feed_inteno_packages mtd-utils
+    ./scripts/feeds uninstall qrencode
+    ./scripts/feeds install -f -p feed_inteno_packages qrencode

-    # install all packages
-    ./scripts/feeds install -a
-
-    # remove broken symlinks ( for packages that are no longer in the feed )
-    find -L package/feeds -maxdepth 2 -type l -delete
+    rm -rf package/feeds/oldpackages/libzstream # have to run this for now since uninstall is not working every time

    cp .genconfig_config_bak .config
    make defconfig

    # record when we last run this script
-    touch tmp/.iop_bootstrap
+    touch tmp/.iop_bootstrap 

    # always return true
    exit 0
--- a/iop/scripts/genconfig.sh
+++ b/iop/scripts/genconfig.sh
@@ -1,447 +1,262 @@
 #!/bin/bash

 function genconfig {
-	export CLEAN=0
-	export IMPORT=1
-	export SRCTREEOVERR=0
-	export FILEDIR="files/"
-	export THEMEDIR="themes"
-	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/iopsys/iop"
-	CUSTPATH="customerconfigs"
-	export CUSTCONF="customerconfigs/customers"
-	export VERBOSE=0
-	export DEVELOPER=0
-	target="bogus"
-	config_path=""
-	brcm63xx_mips="target/linux/iopsys-brcm63xx-mips"
-	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
-	ramips="target/linux/iopsys-ramips"
-	intel_mips="target/linux/intel_mips"
+    export CLEAN=0
+    export IMPORT=0
+    export SRCTREEOVERR=0
+    export FILEDIR="files/"
+    export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"  
+    export CUSTCONF="customerconfigs"
+    export VERBOSE=0
+    export DEVELOPER=0
+    export TMPDIR="/tmp/builder/"
+    LOCAL_MIRROR="http://mirror.inteno.se/mirror"

-	Red='\033[0;31m'          # Red
-	Color_Off='\033[0m'       # Text Reset
-	Yellow='\033[0;33m'       # Yellow
+    iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
+    iopsys_brcm63xx_arm="dg400"
+    target="bogus"

-	function find_last {
-	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
-	}
+    set_target() {

-	function is_new {
-	    for opt in $conf_warned
-	    do
-		if [ "$opt" == "$1" ]
-		then
-		    return 1
-		fi
-	    done
-	    # option not found return true
-	    return 0
-	}
+	local profile=$1

-	function verify_config {
-	    IFS=$'\n'
-	    org=$(<.genconfig.config)
-	    unset IFS
-	    local num
-	    local conf_opt
-	    local conf_org
-	    local conf_new
+	for p in $iopsys_brcm63xx_mips; do
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_mips"
+            fi
+	done

-	    #echo "lines to check $tot_lines"
-	    num=0
-	    for line in $org
-	    do
-		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
-		if [ -n "${conf_opt}" ]
-		then
-		    conf_org=$(find_last ${conf_opt} .genconfig.config)
-		    conf_new=$(find_last ${conf_opt} .config)
-		    if [ "$conf_org" != "$conf_new" ]
-		    then
-			if is_new $conf_opt
-			then
-			    echo -e "config option [${Red}$conf_opt${Color_Off}] is not set correctly in .config"
-			    echo -e "got value [${Yellow}$conf_new${Color_Off}] but wanted [${Yellow}$conf_org${Color_Off}]"
-			    echo "This is a real problem somebody needs to investigate"
-			    echo ""
-			    conf_warned="$conf_warned $conf_opt"
-			fi
-		    else
-			true
-			# for debug to see all options
-			#echo -e "wanted [$conf_org] got [$conf_new]"
-		    fi
-		fi
-		num=$((num+1))
-	    done
-	}
-
-	# Takes a board name and returns the target name in global var $target
-	set_target() {
-	    local profile=$1
+	for p in $iopsys_brcm63xx_arm; do
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_arm"
+            fi
+	done
+    }


-		[ -e $brcm63xx_mips/genconfig ] &&
-			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
-		[ -e $brcm63xx_arm/genconfig ] &&
-			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
-		[ -e $ramips/genconfig ] &&
-			iopsys_ramips=$(cd $ramips; ./genconfig)
-		[ -e $intel_mips/genconfig ] &&
-			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
+    git remote -v | grep -q http || {
+	DEVELOPER=1

-	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips; do
-				echo "$list based boards:"
-				for b in ${!list}; do
-					echo -e "\t$b"
-				done
-			done
-			return
-	    fi
+	bcmAllowed=0
+	iceAllowed=0
+	endptAllowed=0
+	natalieAllowed=0

-	    for p in $iopsys_brcm63xx_mips; do
-		if [ $p == $profile ]; then
-		    target="iopsys_brcm63xx_mips"
-			config_path="$brcm63xx_mips/config"
-		    return
-		fi
-	    done
+	allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -w 'R\|W' | awk '{print$NF}')"
+	for repo in $allowedRepos; do
+	    case $repo in
+		bcmkernel) bcmAllowed=1 ;;
+		ice-client) iceAllowed=1 ;;
+		endptcfg) endptAllowed=1 ;;
+		natalie-dect*) natalieAllowed=1 ;;
+	    esac
+	done
+    }

-	    for p in $iopsys_brcm63xx_arm; do
-		if [ $p == $profile ]; then
-		    target="iopsys_brcm63xx_arm"
-			config_path="$brcm63xx_arm/config"
-		    return
-		fi
-	    done
+    v() {
+	[ "$VERBOSE" -ge 1 ] && echo "$@"
+    }

-	    for p in $iopsys_ramips; do
-		if [ $p == $profile ]; then
-		    target="iopsys_ramips"
-			config_path="$ramips/config"
-		    return
-		fi
-	    done
+    usage() {
+        echo
+        echo 1>&2 "Usage: $0 [OPTIONS] BoardConfig Customerconfig"
+        echo
+	echo "  -c,  remove all files under ./files and import from config "
+	echo "  -v,  verbose"
+	echo "  -u, Update customer config before applying"  
+	echo "	-p, set profile (if exists)"
+	echo "	-t, use latest git tag and number of commits since as version for the build"
+	echo "  -s, enable 'Package source tree override'"
+	echo 
+        echo "BoardConfig ex "
+	ls -1 configs
+	if [ -d "$CUSTCONF/$1" ]; then
+            echo "Customerconfig ex"
+	    ls  $CUSTCONF/*
+	fi  
+	echo
+	echo "Example ./genconfig vg50 TELIA" 
+        echo "(if no customerconfig is chosen the Inteno Config will be used)"
+	echo 	
+        exit 127
+    }

-	    for p in $iopsys_intel_mips; do
-		if [ $p == $profile ]; then
-		    target="intel_mips"
-			config_path="$intel_mips/config"
-		    return
-		fi
-	    done
+    use_local_mirror()
+    {
+	if wget -T 3 -t 2 -O /dev/null $LOCAL_MIRROR >/dev/null 2>/dev/null
+	then
+	    echo "mirror [$LOCAL_MIRROR] exists. Using local mirror"
+	    sed -i "s;CONFIG_LOCALMIRROR=.*;CONFIG_LOCALMIRROR=\"$LOCAL_MIRROR\";" .config
+	else
+	    echo "mirror [$LOCAL_MIRROR] does not exist. Not using local mirror"
+	fi
+    }

-	}
-
-	git remote -v | grep -q http || {
-		DEVELOPER=1
-
-		bcmAllowed=0
-		endptAllowed=0
-		natalieAllowed=0
-		mediatekAllowed=0
-		wifilifeAllowed=0
-
-		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
-		git ls-remote git@dev.iopsys.eu:mediatek/linux.git -q 2>/dev/null && mediatekAllowed=1
-		git ls-remote git@dev.iopsys.eu:dialog/natalie-dect-12.26.git -q 2>/dev/null && natalieAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/wifilife.git -q 2>/dev/null && wifilifeAllowed=1
-	}
-
-	v() {
-		[ "$VERBOSE" -ge 1 ] && echo "$@"
-	}
-
-	usage() {
-		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
-		echo
-		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\t\tVerbose"
-		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
-		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
-		echo -e "  -h|--help\t\tShow this message"
-		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\t\tList all Customers and their board types"
-		echo -e "  -b|--boards\t\tList all board types"
-		echo
-		echo "Example ./iop genconfig dg200 TELIA"
-		echo "(if no customerconfig is chosen, iopsys config will be used)"
-		echo
-		exit 0
-	}
-
-	list_customers()
-	{
-		local ALL="$1"
-		local CUSTOMER="$2"
-		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common | grep -v juci-theme)"
-			if [ "$boards" ]; then
-				echo "$CUSTOMER has following boards:"
-				for board in $boards; do
-					echo -e "\t$board"
-				done
-			else
-				echo "No boards found for $CUSTOMER"
-			fi
-		elif [ "$CUSTOMER" ]; then
-			echo "No customer called $CUSTOMER"
-			exit 1
-		elif [ -d $CUSTCONF ]; then
-			local customers="$(ls -1 $CUSTCONF)"
-			if [ "$customers" -a "$ALL" == 1 ]; then
-				for customer in $customers; do
-					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common | grep -v juci-theme)"
-					if [ "$boards" ]; then
-						for board in $boards; do
-							echo -e "\t$board"
-						done
-					else
-						echo "has no boards"
-					fi
-				done
-			elif [ "$customers" ]; then
-				echo -e "$customers"
-			else
-				echo "no customers found"
-			fi
-		else
-			echo "No $CUSTCONF folder found"
-		fi
-		exit 0
-	}
-
-
-	generate_config()
-	{
+    generate_config()
+    {
 	DIFFFILE="$1"
 	MASTERFILE="$2"
 	while read p; do
-		v "$p"
-		sed -r -i "$p" $MASTERFILE
+	    v  "$p"
+	    sed -r -i "$p" $MASTERFILE
 	done < $DIFFFILE
-	}
+    }

-	setup_dirs()
-	{
-		if git ls-remote $CUSTREPO -q 2>/dev/null; then
-			if [ ! -d "$CUSTPATH" ]; then
-				git clone "$CUSTREPO" "$CUSTPATH"
-			elif [ $IMPORT -eq 1 ]; then
-				cd $CUSTPATH
-				v "git pull"
-				git pull
-				cd - >/dev/null #go back
-			fi
-		else
-			echo "You do not have access to $CUSTREPO"
-		fi
-
-		if [ ! -d "$FILEDIR" ]; then
-			mkdir -p $FILEDIR
-		elif [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $FILEDIR*"
-			rm -rf $FILEDIR*
-		fi
-
-		if [ ! -d "$THEMEDIR" ]; then
-			mkdir -p $THEMEDIR
-		elif [ -d "$THEMEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $THEMEDIR/*"
-			rm -rf $THEMEDIR/*
-		fi
-	}
-
-	create_and_copy_files()
-	{
-		local BOARDTYPE=$1
-		shift
-		local CUSTOMERS=$@
-
-		# Validate seleced board and customers
-		set_target $BOARDTYPE
-		if [ $target == "bogus" ]; then
-			echo "Hardware profile does not exist"
-			exit 1
-		elif [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-					echo "Customer profile for '$CUSTOMER' does not exist"
-					exit 1
-				elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-					echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-					if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-						echo "Common profile configuration will be used"
-					else
-						exit 1
-					fi
-				fi
-			done
-		fi
-
-		# Generate base config
-		rm -f .config
-		v "Config $BOARDTYPE selected"
-		v "cp $CONFIGPATH/config .config"
-		cp $CONFIGPATH/config .config
-
-		if [ -f $config_path/config ]; then
-		    cat $config_path/config >> .config
-		fi
-		if [ -f $config_path/$BOARDTYPE/config ]; then
-		    cat $config_path/$BOARDTYPE/config >> .config
-		fi
-
-		#special handling for intel_mips which use TARGET_DEVICES
-		if [ "$target" = "intel_mips" ]; then
-			subtarget="xrx500"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
-			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
-			device=$(echo $BOARDTYPE | tr a-z A-Z)
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
-		else
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-		fi
-
-		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
-
-		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
-					customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
-					v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
-					cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-				fi
-			done
-		fi
-
-		# Set target version
-		local GIT_TAG=$(git describe --abbrev=0 --tags)
-		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${GIT_TAG}\"" >> .config
-		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
-
-		# Enable Pckage source tree override if selected
-		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
-
-		# developer mode selected ?
-		echo "CONFIG_DEVEL=y" >>.config
-		if [ $DEVELOPER -eq 1 ]; then
-			# rewrite url to clone with ssh instead of http
-			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
-			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
-			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
-			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
-			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
-			[ $wifilifeAllowed -eq 0 ] && echo "CONFIG_WIFILIFE_OPEN=y" >> .config
-		else
-			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
-			echo "CONFIG_BCM_OPEN=y" >> .config
-			echo "CONFIG_ENDPT_OPEN=y" >> .config
-			echo "CONFIG_NATALIE_OPEN=y" >> .config
-			echo "CONFIG_MEDIATEK_OPEN=y" >> .config
-			echo "CONFIG_WIFILIFE_OPEN=y" >> .config
-		fi
-
-		if [ -n "$BRCM_MAX_JOBS" ]
-		then
-		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
-		fi
-
-		# Force regeneration of themes
-		touch package/feeds/juci/juci/Makefile
-
-		# Force regeneration of kernel Makefile
-		# Needed to disable kmods for iopsys-brcm targets
-		touch package/kernel/linux/Makefile
-
-		# we need to signal to bradcom SDK that we have changed the board id
-		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
-		# so just touch that file.
-		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-
-		# Store generated config
-		cp .config .genconfig.config
-
-		# Set default values based on selected parameters
-		v "$(make defconfig 2>&1)"
-
-		echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
-
-		# Clean base-file package to force rebuild when changing profile
-		v "$(make package/base-files/clean 2>&1)"
-
-		verify_config
-	}
-
-	####### main #####
-	if [ ! -e tmp/.iop_bootstrap ]; then
-		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
-		echo "Run: iop feeds_update"
-		exit 0
+    setup_dirs()
+    {
+	if [ $DEVELOPER -eq 1 ]; then
+	    if [ ! -d "$CUSTCONF" ]; then
+		git  clone  git@private.inteno.se:customerconfigs
+	    elif [ $IMPORT -eq 1 ]; then
+		cd customerconfigs
+		v "git pull"
+		git pull
+		cd ..
+	    fi
 	fi

-	if [ $# -eq 0 ]; then
-		echo Current profile:
-		cat $CURRENT_CONFIG_FILE
-		echo "Try ./iop genconfig -h' to get instructions if you want to change current config"
-		exit 0
+
+	if [ ! -d "$FILEDIR" ]; then
+	    mkdir $FILEDIR
+	elif  [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
+	    v "rm -rf $FILEDIR*"	
+	    rm -rf $FILEDIR*
+	fi
+    }
+
+
+    create_and_copy_files()
+    {
+	local BOARDTYPE=$1
+	local CUSTOMER=$2
+
+	# Validate seleced board and customer
+	set_target $BOARDTYPE
+	if [ $target == "bogus" ]; then
+	    echo "Hardware profile does not exist"
+	    exit 1
+	elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/" ]; then
+	    echo "Customer profile does not exist"
+	    exit 1
+	fi
+
+	# Clean base-file package to force rebuild when changing profile
+	make package/base-files/clean
+
+	# Base config on master
+	v  "Config $BOARDTYPE selected"
+	v "cp  $CONFIGPATH/config  .config"
+	cp  $CONFIGPATH/config  .config
+
+	# Apply profile diff to master config if selected
+	if [ -n "$PROFILE" ]; then 
+	    if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
+		cat $CONFIGPATH/$PROFILE.diff >> .config
+	    elif [ "$PROFILE" == "juci" ]; then
+		v "Default profile (juci) is selected."
+	    else
+		echo "ERROR: profile $PROFILE does not exist!"
+		exit 1
+	    fi
+	else 
+	    v "No profile selected! Using default."
+	fi
+	
+	# Set target and profile
+	echo "CONFIG_TARGET_${target}=y" >> .config
+	echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
+
+	# Add customerconfig diff if a customer is selected
+	if [ -n "$CUSTOMER" ]; then
+	    echo "$BOARDTYPE $CUSTOMER" > .current_config_file
+	    if [ -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/fs" ]; then
+		v "cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR"
+		cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR
+	    fi
+	    if [ -e "$CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff" ]; then
+		v "Apply $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff"
+		cat $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff >> .config
+	    fi
+	fi
+
+	# Set target version
+	local GIT_TAG=$(git describe --abbrev=0 --tags)
+	echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
+
+
+	# Enable Pckage source tree override if selected
+	[ $SRCTREEOVERR -eq 1 ] && \
+            echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
+
+
+	# developer mode selected ?
+	if [ $DEVELOPER -eq 1 ]; then
+	    # rewrite url to clone with ssh instead of http
+	    echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
+	    [ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
+	    [ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
+	    [ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    [ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
 	else
-		while [ -n "$1" ]; do
-			case "$1" in
-
-			-c|--clean) export CLEAN=1;;
-			-n|--no-update) export IMPORT=0;;
-			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
-			-p|--profile) export PROFILE="$2"; shift;;
-			-r|--repo) export CUSTREPO="$2"; shift;;
-			-s|--override) export SRCTREEOVERR=1;;
-			-S|--brcmsingel) export BRCM_MAX_JOBS=1;;
-			-h|--help) usage;;
-			-l|--list) list_customers 0 $2;;
-			-a|--list-all)list_customers 1;;
-			-b|--boards)set_target LIST;exit 0;;
-			-*)
-				echo "Invalid option: $1 "
-				echo "Try -h or --help for more information."
-				exit 1
-				;;
-			*) break;;
-			esac
-			shift;
-		done
-
-		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
-
-		setup_dirs
-		create_and_copy_files "$@"
+	    echo "CONFIG_BCM_OPEN=y" >> .config
+	    echo "CONFIG_ICE_OPEN=y" >> .config
+	    echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    echo "CONFIG_NATALIE_OPEN=y" >> .config
 	fi
+
+	# Set default values based on selected parameters
+	make defconfig
+
+	# Temporary fixup for juci/luci profile
+	if [ "$PROFILE" == "luci" ]; then
+	    sed -i '/CONFIG_DEFAULT_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
+	fi
+
+	echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+    }
+
+    ####### main #####
+    if [ ! -e tmp/.iop_bootstrap ]; then
+	echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
+	echo "Run: iop feeds_update"
+	exit 0
+    fi
+
+    if [ $# -eq 0 ]; then
+	echo Current profile:
+	cat .current_config_file
+	echo "Try ./iop_get_config.sh -h' to get instructions if you want to change current config"
+	exit 0
+    else
+	
+	while [ -n "$1" ]; do 
+	    case "$1" in
+
+		-c) export CLEAN=1;;
+		-u) export IMPORT=1;;
+		-v) export VERBOSE="$(($VERBOSE + 1))";;
+		-p) export PROFILE="$2"; shift;; 
+		-t) export USE_TAG=1;; 
+		-s) export SRCTREEOVERR=1;;
+		-h) usage;;
+		-*)
+		    echo "Invalid option: $1 "
+		    echo "Try  -h' for more information."
+		    exit 1
+		    ;;
+		*) break;;
+	    esac
+	    shift;
+	done
+	[ -d $TMPDIR ] || mkdir $TMPDIR
+	setup_dirs
+	create_and_copy_files "$1" "$2"
+	[ -d $TMPDIR ] && rm -rf $TMPDIR
+	use_local_mirror
+    fi
 }

+
 register_command "genconfig" "Generate configuration for board and customer"
--- a/iop/scripts/generate_tarballs.sh
+++ b/iop/scripts/generate_tarballs.sh
@@ -1,167 +1,88 @@
-#!/bin/bash
+#!/bin/sh
+


 build_bcmkernel_consumer() {
-	local tarfile bcmkernelcommith sdkversion
-	sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
-	sdkversion=${sdkversion:0:4}${sdkversion:(-1)}
-	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/broadcom/bcmkernel/${sdkversion:0:5}*.mk | cut -d'=' -f2)
+	local tarfile bcmkernelcommith
+	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/feed_inteno_broadcom/bcmkernel/$sdkversion.mk | cut -d'=' -f2)
 	# do not build bcmopen sdk if it was already built before
-	[ -n "$board" -a -n "$bcmkernelcommith" ] || return
-	ssh $SERVER "test -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz" && return
-	cd ./build_dir/target-*/bcmkernel-*-${sdkversion:0:4}*/bcm963xx/release
-	bash do_consumer_release -p $profile -y -F
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/bcmopen-$profile-$bcmkernelcommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/bcmkernel-3.4-$sdkversion/bcm963xx/release
+	sh do_consumer_release -p $profile -y
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
 	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
-	scp -pv $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
-	ssh $SERVER "[ -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz ] && ln -sf $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz $FPATH/bcmopen-$board-$majver.$minver-latest"
+	scp $tarfile inteno@ihgsp.inteno.se:/home/inteno/public/www/iopsys/consumer/bcmopen-$profile-$bcmkernelcommith.tar.gz
 	rm -f $tarfile
-	cd "$curdir"
+	cd $curdir
 }

 build_natalie_consumer() {
 	# create natalie-dect open version tar file
 	local natalieversion nataliecommith
 	grep -q "CONFIG_TARGET_NO_DECT=y" .config && return
-	natalieversion=$(grep -w "PKG_VERSION:" ./feeds/iopsys/natalie-dect/Makefile | cut -d'=' -f2)
-	nataliecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/natalie-dect/Makefile | cut -d'=' -f2)
-	[ -n "$profile" -a -n "$natalieversion" -a -n "$nataliecommith" ] || return
-	ssh $SERVER "test -f $FPATH/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
-	cd ./build_dir/target-*/natalie-dect-$natalieversion/
+	natalieversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
+	nataliecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/natalie-dect-$natalieversion/
 	mkdir natalie-dect-open-$natalieversion
-	cp -f ipkg-*/natalie-dect/lib/modules/*/extra/dect.ko natalie-dect-open-$natalieversion/dect.ko
+	cp NatalieFpCvm6362/Src/Projects/NatalieV3/FpCvm/Linux6362/dects.ko natalie-dect-open-$natalieversion/dect.ko
 	tar -czv  natalie-dect-open-$natalieversion/ -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
-	scp -pv natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $SERVER:$FPATH/
+	scp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
 	cp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $curdir/
 	rm -rf natalie-dect-open-$natalieversion
 	rm -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
-	cd "$curdir"
+	cd $curdir
 }

-build_endptmngr_consumer() {
-	# create endptmngr open version tar file
+build_endptcfg_consumer() {
+	# create endptcfg open version tar file
 	local endptversion endptcommith
 	grep -q "CONFIG_TARGET_NO_VOICE=y" .config && return
-	endptversion=$(grep -w "PKG_VERSION:" ./feeds/iopsys/endptmngr/Makefile | cut -d'=' -f2)
-	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/endptmngr/Makefile | cut -d'=' -f2)
-	[ -n "$profile" -a -n "$endptversion" -a -n "$endptcommith" ] || return
-	ssh $SERVER "test -f $FPATH/endptmngr-$profile-$endptversion-$endptcommith.tar.gz" && return
-	cd ./build_dir/target-*/endptmngr-$endptversion/
-	mkdir endptmngr-open-$endptversion
-	mkdir endptmngr-open-$endptversion/src
-	cp ./src/endptmngr endptmngr-open-$endptversion/src
-	cp -r ./files/ endptmngr-open-$endptversion/
-	tar -czv  endptmngr-open-$endptversion/ -f endptmngr-$profile-$endptversion-$endptcommith.tar.gz
-	scp -pv endptmngr-$profile-$endptversion-$endptcommith.tar.gz $SERVER:$FPATH/
-	cp endptmngr-$profile-$endptversion-$endptcommith.tar.gz $curdir/
-	rm -rf endptmngr-open-$endptversion
-	rm -f endptmngr-$profile-$endptversion-$endptcommith.tar.gz
-	cd "$curdir"
+	endptversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/endptcfg/Makefile | cut -d'=' -f2)
+	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/endptcfg/Makefile | cut -d'=' -f2)
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/endptcfg-$profile-$endptversion-$endptcommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/endptcfg-$endptversion/
+	mkdir endptcfg-open-$endptversion
+	cp endptcfg endptcfg-open-$endptversion/
+	tar -czv  endptcfg-open-$endptversion/ -f endptcfg-$profile-$endptversion-$endptcommith.tar.gz
+	scp endptcfg-$profile-$endptversion-$endptcommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
+	cp endptcfg-$profile-$endptversion-$endptcommith.tar.gz $curdir/
+	rm -rf endptcfg-open-$endptversion
+	rm -f endptcfg-$profile-$endptversion-$endptcommith.tar.gz
+	cd $curdir
 }

-build_wifilife_consumer() {
-	local ver commit
-	ver=$(grep -w "PKG_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
-	commit=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
-	[ -n "$ver" -a -n "$commit" ] || return
-	ssh $SERVER "test -f $FPATH/wifilife-$target-${ver}_${commit}.tar.xz" && return
-	cd ./build_dir/target-*/wifilife-$ver/ipkg-* || cd ./build_dir/target-mips*musl-*/wifilife-$ver/ipkg-*
-	mkdir -p wifilife-$ver/src
-	cp -rf wifilife/usr/sbin/* wifilife-$ver/src/
-	tar Jcf wifilife-${target}-${ver}_${commit}.tar.xz wifilife-$ver
-	scp -pv wifilife-$target-${ver}_${commit}.tar.xz $SERVER:$FPATH/
-	cp wifilife-${target}-${ver}_${commit}.tar.xz $curdir/
-	rm -rf wifilife-$ver
-	rm -f wifilife-${target}-${ver}_${commit}.tar.xz
-	cd "$curdir"
+build_ice_consumer() {
+	# create ice-client open version tar file
+	local iceversion icebasever icerelease icecommith
+	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | head -1 | cut -d'=' -f2)
+	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
+	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
+	iceversion=$icebasever$icerelease
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/ice-client-$profile-$iceversion-$icecommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/ice-client-$icebasever/ipkg-*
+	tar -czv  ice-client -f ice-client-$profile-$iceversion-$icecommith.tar.gz
+	scp ice-client-$profile-$iceversion-$icecommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
+	cp ice-client-$profile-$iceversion-$icecommith.tar.gz $curdir/
+	rm -f ice-client-$profile-$iceversion-$icecommith.tar.gz
+	cd $curdir
 }

-build_mediatek_kernel() {
-	local mediatek_commit kernel
-
-	mediatek_commit=$(grep CONFIG_KERNEL_GIT_COMMIT .config | cut -d '=' -f2 | tr -d '"')
-	kernel=linux-git*
-	[ -n "$mediatek_commit" ] || return
-	ssh $SERVER "test -f $FPATH/mediatek-kernel-open-$mediatek_commit.tar.gz" && return
-	echo "Building mediatek kernel tarball from kernel commit:"	
-	echo $mediatek_commit
-	cd build_dir/target-mipsel_1004kc*/linux-iopsys-ramips*/linux-git*
-
-	# Save Kconfig files to recreate the same kernel config,
-	# delete everyting else.
-	find drivers/net/wireless/mt_wifi -type f ! -name Kconfig | xargs rm
-	find drivers/net/wireless/rlt_wifi -type f ! -name Kconfig | xargs rm
-
-	# remove git repo
-	rm -rf .git
-
-	# patch kernel for openstk
-	ls consumer_release | while read line; do patch -p1 < consumer_release/$line; done
-	cd ..
-
-	tar -czv $kernel -f mediatek-kernel-open-$mediatek_commit.tar.gz
-	scp -pv mediatek-kernel-open-$mediatek_commit.tar.gz $SERVER:$FPATH/
-	cd "$curdir"
-}
-
-function print_usage {
-	echo "Usage: $0 generate_tarballs"
-	echo "  -t <target>"
-}

 function generate_tarballs {

-    SERVER="god@download.iopsys.eu"
-    FPATH="/var/www/html/iopsys/opensdk"
-
-    set -e
    git remote -v | grep -q http && return # do not continue if this is an open SDK environment

-    target=$(grep CONFIG_TARGET_BOARD .config | cut -d'=' -f2 | tr -d '"')
-    board=$(grep CONFIG_TARGET_FAMILY .config | cut -d'=' -f2 | tr -d '"')
    profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
-    majver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f1 -d .)
-    minver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f2 -d .)
-    curdir="$PWD"
+    sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
+    curdir=$(pwd)

-
-	# Execute user command
-	while getopts "t:h" opt; do
-		case $opt in
-			t)
-				stk_target=${OPTARG}
-				;;
-			h)
-				print_usage
-				exit 1
-				;;
-			\?)
-				print_usage
-				exit 1
-				;;
-		esac
-	done
-
-	if [ ! -n "$stk_target" ]; then
-		print_usage
-		exit 1
-	fi
-
-	if [ "$stk_target" == "broadcom" ]; then
-		build_bcmkernel_consumer
-		build_natalie_consumer
-		build_endptmngr_consumer
-		build_wifilife_consumer
-	elif [ "$stk_target" == "mediatek" ]; then
-		build_mediatek_kernel
-		build_wifilife_consumer
-	else
-		echo "Invalid target: $stk_target"
-		print_usage
-		exit 1
-	fi
+    build_bcmkernel_consumer
+    build_natalie_consumer
+    build_endptcfg_consumer
+    build_ice_consumer

 }

-register_command "generate_tarballs" "Generate tarballs for Open SDK"
+register_command "generate_tarballs" "Generate tarballs for openstk"

--- a/iop/scripts/install_key.sh
+++ b/iop/scripts/install_key.sh
@@ -10,7 +10,7 @@ function install_key {
    echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
    echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
    echo "tty/0::askfirst:/bin/ash --login" >>files/etc/inittab
-    echo "console::askfirst:/bin/cttyhack /bin/ash --login" >>files/etc/inittab
+    echo "ttyS0::askfirst:/bin/ash --login" >>files/etc/inittab

    echo Done
 }
--- a/Show More
+++ b/Show More