gigaset-elements 2.4.2 - dg400 integration, dectmngr2 support

third party applications.

4g-support/Makefile

@@ -1,24 +1,19 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=mcpd
+PKG_NAME:=4g-support
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/mcpd
+define Package/4g-support
   CATEGORY:=Network
-  SUBMENU:=IPTV
-  TITLE:=Multicast Daemon
+  TITLE:=4G Network Setup Tools
 endef
 
-define Package/mcpd/description
-	Multicast Daemon
+define Package/4g-support/description
+	4g-support contains necessary tools to setup 4G WAN connection
 endef
 
 define Build/Prepare
@@ -29,8 +24,8 @@ endef
 define Build/Compile
 endef
 
-define Package/mcpd/install
+define Package/4g-support/install
 	$(CP) ./files/* $(1)/
 endef
 
-$(eval $(call BuildPackage,mcpd))
+$(eval $(call BuildPackage,4g-support))

4g-support/files/etc/gcom/ncmconnection.gcom

@@ -0,0 +1,62 @@
+opengt
+set com 115200n81
+set comecho off
+set senddelay 0.05
+waitquiet 1 0.2
+
+:start
+ if $env("USE_DISCONNECT")="1" goto disconnect
+ send "AT^^NDISDUP=1,1,\""
+ send $env("USE_APN")
+
+ if $env("USE_AUTHTYPE")="-1" goto noauth
+ else goto auth
+
+:noauth
+ send "\"^m"
+ goto result
+
+:auth
+ send "\",\""
+ send $env("USE_USERID")
+ send "\",\""
+ send $env("USE_PASSWORD")
+ send "\","
+ send $env("USE_AUTHTYPE")
+ send "^m"
+ goto result
+
+:result
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto connok
+ if % = 1 goto connerr
+ if % = 2 goto connerr
+
+:connok
+ print "WWAN connection established.\r\n"
+ goto done
+
+:connerr
+ print "WWAN error. Connection failed.\r\n"
+ exit 1
+
+:disconnect
+ send "AT^^NDISDUP=1,0,\""
+ send $env("USE_APN")
+ send "\"^m"
+
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto disconnok
+ if % = 1 goto disconnerr
+ if % = 2 goto disconnerr
+
+:disconnok
+ print "WWAN connection disconnected.\r\n"
+ goto done
+
+:disconnerr
+ print "WWAN disconnection error.\r\n"
+ exit 1
+
+:done
+ exit 0

4g-support/files/etc/hotplug.d/net/05-mobile

@@ -0,0 +1,35 @@
+. /lib/network/config.sh
+. /usr/share/libubox/jshn.sh
+
+iface_status() {
+	local iface=$1
+	local up
+	json_load "$(ifstatus $iface)"
+	json_get_var up up
+	json_close_object
+	return $up
+}
+
+case "$ACTION" in
+        add|register)
+                if [ "${INTERFACE:0:4}" == "wwan" ]; then
+                        netname=$(get_network_of "$INTERFACE")
+                        for net in $netname; do
+				local service=$(uci -q get network.$net.service)
+				local cnt=0
+				while $(iface_status $net); do
+		                        ifup $net
+					if [ "$service" == "qmi" ]; then
+						cnt=$(($cnt+1))
+						# quit trying if still not online after three times
+						[ $cnt -eq 3 ] && break
+						sleep 5
+					else
+						break
+					fi
+				done
+                        done
+                fi
+        ;;
+esac
+

4g-support/files/etc/hotplug.d/usb/30-usbnet

@@ -0,0 +1,66 @@
+#!/bin/sh
+
+local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev usbno usbbr
+
+sanitize() {
+	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
+}
+
+find_usb_attrs() {
+	usb_dir="/sys/$DEVPATH"
+	[ -f "$usb_dir/idVendor" ] || usb_dir="${usb_dir%/*}"
+
+	uVid=$(cat "$usb_dir/idVendor")
+	uPid=$(cat "$usb_dir/idProduct")
+	uMa=$(sanitize "$usb_dir/manufacturer")
+	uPr=$(sanitize "$usb_dir/product")
+	uSe=$(sanitize "$usb_dir/serial")
+	bNumConfs=$(cat "$usb_dir/bNumConfigurations")
+	bConf=$(cat "$usb_dir/bConfigurationValue")
+	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
+	if [ -n "$cdcdev" ]; then
+		comdev=$cdcdev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$4}' | head -1)
+	else
+		comdev=$ttydev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$4}' | head -1)
+	fi
+	[ -n "$mdmtyp" ] || mdmtyp=$(grep $uVid:$uPid /etc/modemdb | awk '{print$2}' | head -1)
+	[ -n "$vendor" ] || vendor=$(grep $uVid:$uPid /etc/modemdb | awk '{print$3}' | head -1)
+	[ -n "$product" ] || product=$(grep $uVid:$uPid /etc/modemdb | awk '{print$4}' | head -1)
+}
+
+convert_to_mbim() {
+	if [ "$mdmtyp" == "mbim" ] && [ "$bNumConfs" == "2" ]; then
+		[ "$bConf" == "2" ] || echo 2 > $usb_dir/bConfigurationValue
+	fi
+}
+
+usbno=$(echo $DEVPATH | cut -d'/' -f5)
+usbbr=$(echo $DEVPATH | cut -d'/' -f7)
+case "$usbbr" in
+	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
+esac
+
+find_usb_attrs
+if [ "$ACTION" = add ]; then
+	convert_to_mbim "$uVid:$uPid"
+	if [ -n "$uVid" ] && [ -n "$uPid" ] && [ -n "$mdmtyp" ] && [ -n "$netdev" ] && [ -n "$comdev" ]; then
+		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+			sed -i "/$usbno:$usbbr/ d" /var/usbnets
+			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
+		fi
+	fi
+fi
+
+if [ "$ACTION" = remove ]; then
+	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+		sed -i "/$usbno:$usbbr/ d" /var/usbnets
+	fi
+fi

4g-support/files/etc/modemdb

@@ -0,0 +1,100 @@
+1bbb:011e	qmi
+1a8d:1001	ecm
+1a8d:100c	ecm
+1a8d:100d	ecm
+16d8:6280	qmi
+16d8:6803	qmi
+16d8:6804	qmi
+16d8:7003	qmi
+16d8:700a	qmi
+2001:7d01	mbim
+2001:7d02	mbim
+2001:7d03	mbim
+12d1:14ac	qmi
+12d1:140c	qmi
+12d1:1506	qmi	Huawei		E367/392/398
+12d1:1506	ncm	Huawei		E3276
+12d1:14d2	qmi
+12d1:1c07	ncm
+12d1:1436	ecm
+12d1:14c9	qmi
+12d1:14db	ecm
+12d1:151d	mbim
+12d1:151e	qmi	Huawei		E353
+12d1:1c1e	ncm
+12d1:150c	qmi
+12d1:150f	qmi
+12d1:151b	qmi
+12d1:142d	ecm
+12d1:1432	ecm
+12d1:1c1f	ncm
+12d1:1433	qmi
+12d1:1465	ecm
+12d1:14ca	qmi
+12d1:14cf	ncm
+12d1:14bc	ecm
+12d1:14ae	ecm
+12d1:1576	mbim
+12d1:1577	mbim
+12d1:1400	mbim
+12d1:14f7	mbim
+12d1:1464	qmi
+12d1:14cb	qmi
+12d1:14cc	qmi
+12d1:14c6	qmi
+12d1:14fa	mbim
+12d1:1578	mbim
+12d1:14c8	qmi
+12d1:14f8	mbim
+12d1:1575	mbim
+12d1:1579	mbim
+12d1:157a	mbim
+12d1:157b	mbim
+12d1:157f	mbim
+12d1:1f16	mbim	Vodafone	K5150
+12d1:1404	qmi
+19f2:1700	ecm	
+1410:b001	qmi
+1527:1000	ecm
+0b3c:c005	qmi
+0f3d:68a2	qmi
+1199:68a2	qmi	SierraWireless	M7710
+1199:68c0	qmi	SierraWireless	M7304
+1349:1100	qmi
+1349:1200	qmi	
+1199:683c	qmi
+2360:2100	qmi
+2360:2200	qmi
+2360:2300	qmi
+2507:0000	qmi	
+19d2:0055	qmi
+19d2:0052	qmi
+19d2:0063	qmi
+19d2:1008	qmi
+19d2:1010	qmi
+19d2:2002	qmi
+19d2:1176	qmi
+19d2:1023	mbim
+19d2:0104	qmi
+19d2:1018	qmi
+19d2:1032	mbim
+19d2:1402	qmi
+19d2:1405	ecm
+19d2:1426	qmi
+19d2:0031	qmi
+19d2:0124	qmi
+19d2:1254	qmi
+19d2:0017	qmi
+19d2:0002	qmi
+19d2:0121	qmi
+19d2:1252	qmi
+19d2:0157	qmi
+19d2:0167	qmi
+19d2:0199	qmi
+19d2:0257	qmi
+19d2:0326	qmi
+19d2:0349	ecm
+19d2:1408	ecm
+19d2:0284	qmi
+19d2:0019	qmi
+19d2:0265	qmi

4g-support/files/lib/netifd/proto/4g.sh

@@ -0,0 +1,159 @@
+#!/bin/sh
+INCLUDE_ONLY=1
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_4g_init_config() {
+	proto_config_add_string "modem"
+	proto_config_add_string "service"
+	proto_config_add_string "comdev"
+	proto_config_add_string "ipaddr"
+	proto_config_add_string "netmask"
+	proto_config_add_string "hostname"
+	proto_config_add_string "clientid"
+	proto_config_add_string "vendorid"
+	proto_config_add_boolean "broadcast"
+	proto_config_add_string "reqopts"
+	proto_config_add_string "apn"
+	proto_config_add_string "username"
+	proto_config_add_string "password"
+	proto_config_add_boolean "lte_apn_use"
+	proto_config_add_string "lte_apn"
+	proto_config_add_string "lte_username"
+	proto_config_add_string "lte_password"
+	proto_config_add_string "pincode"
+	proto_config_add_string "technology"
+	proto_config_add_string "auto"
+}
+
+proto_4g_setup() {
+	local config="$1"
+	local iface="$2"
+
+        local ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+        json_get_vars ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+
+        local opt dhcpopts
+        for opt in $reqopts; do
+                append dhcpopts "-O $opt"
+        done
+
+        for opt in $sendopts; do
+                append dhcpopts "-x $opt"
+        done
+
+        [ "$broadcast" = 1 ] && broadcast="-B" || broadcast=
+        [ -n "$clientid" ] && clientid="-x 0x3d:${clientid//:/}" || clientid="-C"
+        [ -n "$iface6rd" ] && proto_export "IFACE6RD=$iface6rd"
+        [ "$iface6rd" != 0 -a -f /lib/netifd/proto/6rd.sh ] && append dhcpopts "-O 212"
+        [ -n "$zone6rd" ] && proto_export "ZONE6RD=$zone6rd"
+        [ -n "$zone" ] && proto_export "ZONE=$zone"
+        [ "$delegate" = "0" ] && proto_export "IFACE6RD_DELEGATE=0"
+
+        json_get_var comdev comdev
+        json_get_var apn apn
+        json_get_var service service
+        json_get_var pincode pincode
+
+
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			[ -n "$pincode" ] && {
+				if ! mbimcli -d $comdev --query-pin-state 2>&1 | grep -q "unlocked"; then
+					set -o pipefail
+					if ! mbimcli -d $comdev --enter-pin="${pincode}" 2>&1; then
+						mbimcli -d $comdev --query-pin-state
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" mbim-network $comdev start
+		;;
+		ncm)
+			[ -n "$pincode" ] && echo $pincode | gcom -d $comdev
+			USE_APN="$apn" gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			[ -n "$pincode" ] && {
+				if ! qmicli -d $comdev --dms-uim-get-pin-status 2>&1 | grep -q "enabled-verified\|disabled" >/dev/null; then
+					set -o pipefail
+					if ! qmicli -d $comdev --dms-uim-verify-pin="PIN,${pincode}" 2>&1; then
+						qmicli -d $comdev --dms-uim-get-pin-status
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" qmi-network $comdev start
+		;;		
+	esac
+	
+	proto_export "INTERFACE=$config"
+	proto_run_command "$config" udhcpc -R \
+		-p /var/run/udhcpc-$iface.pid \
+		-s /lib/netifd/dhcp.script \
+		-f -t 0 -i "$iface" \
+		${ipaddr:+-r $ipaddr} \
+		${hostname:+-H $hostname} \
+		${vendorid:+-V $vendorid} \
+		$clientid $broadcast $dhcpopts
+}
+
+proto_4g_teardown() {
+	local interface="$1"
+	local iface="$2"
+	local modem service comdev
+
+        config_load network
+        config_get service $interface service
+        config_get comdev $interface comdev
+
+#	config_get modem $interface modem
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			mbim-network $comdev stop
+		;;
+		ncm)
+			USE_DISCONNECT=1 gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			qmi-network $comdev stop
+		;;		
+	esac
+	proto_kill_command "$interface"
+}
+
+add_protocol 4g

alleato-base/Makefile

@@ -1,188 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=alleato-base
-
-PKG_VERSION:=14.49.2
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-PKG_SOURCE_URL:=git@iopsys.inteno.se:alleato_base.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=8314aed451255410a2cd4fa43ac3235504e8f018
-
-PKG_MAINTAINER:=Martin Assarsson, ALLEATO
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-######################################################
-
-define Package/alleato3
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Alleato
-  DEPENDS:=+python
-  TITLE:=Alleato python libraries
-endef
-
-define Package/zwaved
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Alleato
-  DEPENDS:=+jansson
-  TITLE:=Alleato zwave daemon
-endef
-
-define Package/zwave-mgr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Alleato
-  DEPENDS:=+alleato3
-  TITLE:=Alleato zwave manager
-endef
-
-define Package/zwave-profiler
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Alleato
-  DEPENDS:=+alleato3
-  TITLE:=Alleato zwave profiler
-endef
-
-define Package/alleato-scheduler
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Alleato
-  DEPENDS:=+alleato3
-  TITLE:=Alleato scheduler
-endef
-
-define Package/alleato-boxconfig
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Alleato
-  DEPENDS:=+alleato3
-  TITLE:=Alleato boxconfig
-endef
-
-define Package/all-omc
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Alleato
-  DEPENDS:=+alleato3 +screen
-  TITLE:=Alleato remote tunnel
-endef
-
-define Package/ubus-kicker
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Alleato
-  DEPENDS:=
-  TITLE:=Alleato ubus-kicker
-endef
-
-define Package/mqttnagios
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Alleato
-  DEPENDS:=
-  TITLE:=Alleato mqttnagios
-endef
-
-define Package/all4-alleato-tools
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Alleato
-  DEPENDS:=
-  TITLE:=Alleato tools
-endef
-
-######################################################
-
-define Package/alleato3/install
-	$(INSTALL_DIR) $(1)/usr/lib/python2.7/
-	$(CP) -r $(PKG_BUILD_DIR)/python-2.7/* $(1)/usr/lib/python2.7/
-endef
-
-define Package/zwaved/install
-	$(INSTALL_DIR) $(1)/usr/sbin $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/zwaved $(1)/etc/init.d/zwaved
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/zwaved $(1)/usr/sbin/zwaved
-endef
-
-define Package/zwave-mgr/install
-	$(INSTALL_DIR) $(1)/usr/mqttrules $(1)/etc/init.d $(1)/etc/alleato/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/zwave-mgr $(1)/etc/init.d/zwave-mgr
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/zwave_mgr $(1)/usr/mqttrules/zwave_mgr
-endef
-
-define Package/zwave-profiler/install
-	$(INSTALL_DIR) $(1)/usr/mqttrules $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/zwave-profiler $(1)/etc/init.d/zwave-profiler
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/zwave-profiler $(1)/usr/mqttrules/zwave-profiler
-endef
-
-define Package/alleato-scheduler/install
-	$(INSTALL_DIR) $(1)/usr/mqttrules $(1)/etc/init.d $(1)/etc/crontabs/sched
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/scheduler $(1)/etc/init.d/scheduler 
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/scheduler $(1)/usr/mqttrules/scheduler
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/data/schedule $(1)/etc/crontabs/sched/schedule
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/data/schedule $(1)/etc/crontabs/schedule
-endef
-
-define Package/alleato-boxconfig/install
-	$(INSTALL_DIR) $(1)/usr/sbin $(1)/usr/bin $(1)/etc/init.d $(1)/etc/alleato $(1)/home/mosquitto
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/boxconfig $(1)/etc/init.d/boxconfig
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/boxconfig $(1)/usr/bin/boxconfig
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/genmosquittoconf $(1)/usr/bin/genmosquittoconf
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/check_client_id $(1)/usr/sbin/check_client_id
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/data/boxconfig.conf $(1)/etc/boxconfig.conf
-endef
-
-define Package/all-omc/install
-	$(INSTALL_DIR) $(1)/root $(1)/etc/init.d $(1)/etc/config $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/omc $(1)/etc/init.d/omc
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/root/ssh_key $(1)/root/ssh_key
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/data/alleato.config $(1)/etc/config/alleato
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/omc $(1)/usr/bin/omc
-endef
-
-define Package/ubus-kicker/install
-	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/ubus-kicker $(1)/etc/init.d/ubus-kicker
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/ubus-kicker $(1)/usr/sbin/ubus-kicker
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/akick $(1)/usr/sbin/akick
-endef
-
-define Package/mqttnagios/install
-	$(INSTALL_DIR) $(1)/etc/nagios.d $(1)/usr/bin $(1)/etc/crontabs $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/mqttnagios $(1)/etc/init.d/mqttnagios
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/send_mqtt_nag $(1)/usr/bin/send_mqtt_nag
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/nagios.d/dropbear $(1)/etc/nagios.d/dropbear.nag
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/nagios.d/mosquitto $(1)/etc/nagios.d/mosquitto.nag
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/nagios.d/ssh $(1)/etc/nagios.d/ssh.nag
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/nagios.d/zwaved $(1)/etc/nagios.d/zwaved.nag
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/data/mqttnagios $(1)/etc/crontabs/mqttnagios
-	echo '/5 * * * * /usr/sbin/check_client_id' >> $(1)/etc/crontabs/root
-endef
-
-define Package/all4-alleato-tools/install
-	$(INSTALL_DIR) $(1)/usr/bin $(1)/etc/init.d $(1)/opt/alleato
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/house $(1)/etc/init.d/house
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/rulesd $(1)/etc/init.d/rulesd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/binaries/alleato_tools $(1)/usr/bin/alleato_tools
-endef
-
-######################################################
-
-$(eval $(call BuildPackage,alleato3))
-$(eval $(call BuildPackage,zwaved))
-$(eval $(call BuildPackage,zwave-mgr))
-$(eval $(call BuildPackage,zwave-profiler))
-$(eval $(call BuildPackage,alleato-scheduler))
-$(eval $(call BuildPackage,alleato-boxconfig))
-$(eval $(call BuildPackage,all-omc))
-$(eval $(call BuildPackage,ubus-kicker))
-$(eval $(call BuildPackage,mqttnagios))
-$(eval $(call BuildPackage,all4-alleato-tools))

anyfi/Config.in

@@ -1,7 +0,0 @@
-config ANYFI_CONTROLLER
-	string "Controller IP or FQDN"
-	depends on PACKAGE_anyfi
-	help
-	  The default IP address or fully qualified domain name (FQDN)
-	  of the Controller that should manage the Anyfi.net software.
-

anyfi/Makefile

@@ -1,61 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-ANYFI_TARGET := $(ARCH)-linux-$(subst C,c,$(LIBC))-$(LIBCV)
-
-PKG_NAME    := anyfi
-PKG_VERSION := 1.3.9
-PKG_RELEASE := 1
-
-PKG_SOURCE     := anyfimac-$(PKG_VERSION)-$(ANYFI_TARGET).tar.bz2
-PKG_SOURCE_URL := http://anyfi.net/download
-PKG_BUILD_DIR  := $(BUILD_DIR)/anyfimac-$(PKG_VERSION)-$(ANYFI_TARGET)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION    := net
-  CATEGORY   := Network
-  TITLE      := Anyfi.net - Free SDWN Data Plane for IEEE 802.11
-  URL        := http://anyfi.net
-  DEPENDS    := +kmod-tun +librt +wl-anyfi
-  MAINTAINER := Anyfi Networks <eng@anyfinetworks.com>
-endef
-
-define Package/$(PKG_NAME)/description
-	Anyfi.net is a free Software-Defined Wirless Networking (SDWN)
-	forwarding data plane implementation for IEEE 802.11.
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Build/Configure
-	echo "config anyfi controller" > $(PKG_BUILD_DIR)/anyfi.conf
-	echo "	option 'hostname'	$(CONFIG_ANYFI_CONTROLLER)" >> \
-	    $(PKG_BUILD_DIR)/anyfi.conf
-	echo "config anyfi optimizer" >> $(PKG_BUILD_DIR)/anyfi.conf
-endef
-
-define Build/Compile
-	@echo "Nothing to do - Anyfi.net software comes pre-built."
-endef
-
-define Package/$(PKG_NAME)/conffiles
-	/etc/config/anyfi
-endef
-
-define Package/$(PKG_NAME)/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/anyfi.conf $(1)/etc/config/anyfi
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/anyfimac $(1)/sbin
-	$(LN) anyfimac $(1)/sbin/anyfid
-	$(LN) anyfimac $(1)/sbin/myfid
-	$(INSTALL_DIR) $(1)/bin
-	$(LN) ../sbin/anyfimac $(1)/bin/anyfidctl
-	$(LN) ../sbin/anyfimac $(1)/bin/myfidctl
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

anyfi/files/lib/network/anyfi.sh

@@ -1,558 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2013-2014 Anyfi Networks AB.
-#
-# Overview of the Integration
-# ===========================
-#
-# Anyfi.net software consists of two user space daemons; the radio daemon
-# anyfid and the tunnel termination daemon myfid. They communicate with each
-# other and with a Controller [1] over UDP/IP.
-#
-# The radio daemon anyfid provides guests with access to remote Wi-Fi networks.
-# It needs a Wi-Fi monitor interface to detect when guest devices come within
-# range and a pool of virtual access points to serve them. The integration is
-# responsible for creating the monitor interface and the pool of virtual access
-# points; anyfid handles the rest.
-#
-# The tunnel termination daemon myfid provides remote access to the local Wi-Fi
-# network. It is up to the integration to configure myfid to authenticate remote
-# devices in the same way that devices are authenticated when connecting
-# locally.
-#
-# Myfid is also responsible for telling the controller the MAC address of
-# devices that connect locally, so that they can later be offered seamless
-# remote access whenever they come close to another access point running anyfid.
-# However, when the user changes the WPA passphrase all such associations
-# between previously connected devices and the local Wi-Fi network should be
-# removed. The integration does so by passing myfid the --reset flag.
-#
-# Below is the integration logic in pseudo code. If you need to integrate
-# Anyfi.net software in your own firmware build environment you can find step
-# by step instructions at http://anyfi.net/integration.
-#
-# 1. A Community Edition of the Controller is available for download at
-#    http://www.anyfinetworks.com/download. You can also use the public
-#    demonstration controller at "demo.anyfi.net".
-#
-#
-# Integration Logic in Pseudo Code
-# ================================
-#
-# After enabling a Wi-Fi device:
-#   IF a controller is configured AND Anyfi.net is not disabled
-#     ALLOCATE monitor interface and virtual access point pool for anyfid
-#     START anyfid
-#
-#   FOREACH Wi-Fi interface of this device
-#     IF a controller is configured AND Anyfi.net is not disabled
-#      GENERATE a config file for myfid
-#
-#      IF the WPA passphrase has changed
-#        ADD the --reset flag to myfid arguments
-#
-#      START myfid on the Wi-Fi interface
-#
-# After disabling a Wi-Fi device:
-#   STOP anyfid
-#
-#   FOREACH Wi-Fi interface of this device
-#     STOP myfid on the Wi-Fi interface
-#
-# NOTE 1: The integration provides remote access to all Wi-Fi interfaces on the
-#         system that have anyfi_disabled set to 0. Each interface will have
-#         its own myfid daemon. There should however only be one anyfid daemon
-#         per radio.
-#
-# NOTE 2: On concurrent dual band routers each radio should have its own anyfid
-#         daemon.
-#
-#
-# Anyfi.net UCI data model
-# ========================
-#
-# Anyfi.net global parameters:
-#
-#   Name            Type        Default         Description
-#   controller
-#      .hostname    IP or FQDN  demo.anyfi.net  Controller IP or FQDN
-#      .key         path        -               Controller public key PEM file
-#   optimizer
-#      .key         path        -               Optimizer public key PEM file
-#
-# Wi-Fi device parameters:
-#
-#   Name            Type     Default  Description
-#   anyfi_disabled  boolean  0        Enable/disable guest access on this radio
-#   anyfi_iface     port     -        Bind anyfid to a WAN interface IP address
-#   anyfi_port      number   -        Bind anyfid to a SDWN UDP port
-#   anyfi_floor     percent  5        Min backhaul and spectrum allocation
-#   anyfi_ceiling   percent  75       Max backhaul and spectrum allocation
-#   anyfi_uplink    integer  -        WAN uplink capacity in bits per second
-#   anyfi_downlink  integer  -        WAN downlink capacity in bits per second
-#   anyfi_bssids    integer  -        Max number of virtual interfaces to use
-#   anyfi_clients   integer  -        Max number of concurrent guest users
-#
-# Wi-Fi interface parameters:
-#
-#   Name               Type    Default  Description
-#   anyfi_disabled     boolean 0        Enable remote access on this network
-#   anyfi_iface        string  -        Bind myfid to a WAN interface IP
-#                                       address
-#   anyfi_port         port    -        Bind myfid to a SDWN UDP port
-#   anyfi_autz_server  IP      -        RADIUS authorization server IP
-#   anyfi_autz_port    port    1812     RADIUS authorization server UDP port
-#   anyfi_autz_secret  string  -        RADIUS authorization server shared
-#                                       secret
-#   anyfi_acct_server  IP      -        RADIUS extra accounting server IP
-#   anyfi_acct_port    port    1813     RADIUS extra accounting server UDP port
-#   anyfi_acct_secret  string  -        RADIUS extra accounting server shared
-#                                       secret
-
-append ENABLE_HOOKS anyfi_enable
-append DISABLE_HOOKS anyfi_disable
-
-# Daemon run dir for temporary files.
-RUNDIR=/var/run
-
-# Config file dir for persistent configuration files.
-CONFDIR=/etc
-
-##### Wi-Fi device handling ##################################################
-
-# Get the channel for Wi-Fi device.
-# anyfi_dev_get_channel <device>
-anyfi_dev_get_channel() {
-	local device="$1"
-	local hwmode channel
-
-	config_get hwmode  "$device" hwmode
-	config_get channel "$device" channel
-
-	if [ "$channel" = auto -o "$channel" = 0 ]; then
-		case "$hwmode" in
-		auto)
-			channel=auto
-			;;
-
-		*b*|*g*)
-			channel=auto2
-			;;
-
-		*a*)
-			channel=auto5
-			;;
-		esac
-	fi
-	echo "$channel"
-}
-
-# Get the WLAN interface list for a WLAN device.
-# anyfi_get_vifs <device>
-anyfi_get_vifs() {
-	local device=$1
-	local vifs=""
-	local cfg
-
-	for cfg in $CONFIG_SECTIONS; do
-		local type dev
-		config_get type "$cfg" TYPE
-		config_get dev "$cfg" device
-
-		if [ "$type" = wifi-iface ] && [ "$dev" = "$device" ]; then
-			append vifs "$cfg"
-		fi
-	done
-
-	echo "$vifs"
-}
-
-# Start the Anyfi.net radio head daemon anyfid on a device.
-# anyfi_dev_start <device> <type> <controller> <controller_key>
-anyfi_dev_start()
-{
-	local device="$1"
-	local type="$2"
-	local controller="$3"
-	local controller_key="$4"
-	local nvifs bssids monitor iflist
-
-	# Determine how many virtual interfaces we should use
-	config_get bssids "$device" anyfi_bssids
-	nvifs=$(anyfi_get_vifs "$device" | wc -w)
-
-	if [ -n "$bssids" ]; then
-		# Limit the number of virtual interfaces to 32
-		[ "$bssids" -lt 32 ] || bssids=32
-	elif [ $nvifs -lt 4 ]; then
-		# Don't use more that 8 interfaces in total if possible...
-		bssids=$((8 - $nvifs))
-	else
-		# ...but try to allocate at least 4 interfaces for anyfid.
-		bssids=4
-	fi
-
-	# ALLOCATE monitor and pool of virtual access points
-	if monitor=$(anyfi_${type}_alloc_monitor "$device") && \
-	   iflist=$(anyfi_${type}_alloc_iflist "$device" $bssids)
-	then
-		local args=""
-		local wanif port floor ceiling uplink downlink clients
-
-		config_get wanif    "$device" anyfi_iface
-		config_get port     "$device" anyfi_port
-		config_get floor    "$device" anyfi_floor
-		config_get ceiling  "$device" anyfi_ceiling
-		config_get uplink   "$device" anyfi_uplink
-		config_get downlink "$device" anyfi_downlink
-		config_get clients  "$device" anyfi_clients
-
-		# If there are no interfaces on this device then
-		# anyfid controls channel
-		if [ "$nvifs" -eq 0 ]; then
-			args="$args --channel=$(anyfi_dev_get_channel $device)"
-		fi
-
-		[ -n "$wanif"    ] && args="$args --bind-if=$wanif"
-		[ -n "$port"     ] && args="$args --bind-port=$port"
-		[ -n "$floor"    ] && args="$args --floor=$floor"
-		[ -n "$ceiling"  ] && args="$args --ceiling=$ceiling"
-		[ -n "$uplink"   ] && args="$args --uplink=$uplink"
-		[ -n "$downlink" ] && args="$args --downlink=$downlink"
-		[ -n "$clients"  ] && args="$args --max-clients=$clients"
-		[ -n "$controller_key" ] && \
-			args="$args --controller-key=$controller_key"
-
-		# START anyfid
-		echo "$device: starting anyfid"
-		/sbin/anyfid --accept-license -C "$controller" -B \
-		             -P $RUNDIR/anyfid_$device.pid $args \
-			     $monitor $iflist
-	else
-		echo "$device: failed to allocate anyfid interfaces" 1>&2
-	fi
-}
-
-##### Wi-Fi interface handling ###############################################
-
-# Get the printable name of an interface.
-anyfi_vif_get_name() {
-	local ifname
-	config_get ifname "$1" ifname
-	echo "${ifname:-$1}"
-}
-
-# Generate the config file for myfid from UCI variables.
-# anyfi_vif_gen_config <vif>
-anyfi_vif_gen_config() {
-	local vif="$1"
-	local name="$(anyfi_vif_get_name $1)"
-	local device net ssid enc key isolate ifname
-
-	config_get device  "$vif" device
-	config_get net     "$vif" network
-	config_get ssid    "$vif" ssid
-	config_get enc     "$vif" encryption
-	config_get key     "$vif" key
-	config_get isolate "$vif" isolate
-	config_get ifname  "$vif" ifname
-
-	# Check basic settings before proceeding
-	[ -n "$net" ] || [ -n "$ssid" ] || return 1
-
-	local auth_proto auth_mode auth_cache group_rekey
-	local ciphers wpa_ciphers rsn_ciphers passphrase
-	local auth_server auth_port auth_secret
-	local autz_server autz_port autz_secret
-	local acct_server acct_port acct_secret
-	local acct2_server acct2_port acct2_secret
-	local radius_nasid
-
-	# Resolve explicit cipher overrides (tkip, ccmp or tkip+ccmp)
-	case "$enc" in
-	*+tkip+ccmp|*+tkip+aes)
-		ciphers=tkip+ccmp
-		;;
-
-	*+ccmp|*+aes)
-		ciphers=ccmp
-		;;
-
-	*+tkip)
-		ciphers=tkip
-		;;
-	esac
-
-	# Resolve authentication protocol (WPA or WPA2)
-	case "$enc" in
-	psk-mixed*|wpa-mixed*|mixed-psk*|mixed-wpa*)
-		auth_proto=wpa+rsn
-		wpa_ciphers=$ciphers
-		rsn_ciphers=$ciphers
-		;;
-
-	psk2*|wpa2*)
-		auth_proto=rsn
-		rsn_ciphers=$ciphers
-		;;
-
-	psk*|wpa*)
-		auth_proto=wpa
-		wpa_ciphers=$ciphers
-		;;
-
-	none)
-		echo "$name: no remote access for security reasons (open network)" 1>&2
-		return 1
-		;;
-
-	wep*)
-		echo "$name: no remote access for security reasons (wep is insecure)" 1>&2
-		return 1
-		;;
-
-	*)
-		echo "$name: unrecognized encryption type $enc" 1>&2
-		return 1
-		;;
-	esac
-
-	# Resolve authenticator mode (PSK or 802.1X)
-	case "$enc" in
-	psk*)
-		auth_mode=psk
-		passphrase=$key
-		[ -n "$passphrase"  ] || return 1
-		;;
-
-	wpa*)
-		auth_mode=eap
-
-		config_get auth_server "$vif" radius_server
-		config_get auth_port   "$vif" radius_port
-		config_get auth_secret "$vif" radius_secret
-
-		config_get acct_server "$vif" acct_server
-		config_get acct_port   "$vif" acct_port
-		config_get acct_secret "$vif" acct_secret
-
-		config_get auth_cache   "$vif" auth_cache
-		config_get group_rekey  "$vif" wpa_group_rekey
-
-		[ -n "$auth_server" ] || return 1
-		[ -n "$auth_secret" ] || auth_secret="$key"
-		[ -n "$acct_server" -a -z "$acct_secret" ] && acct_secret="$key"
-		;;
-
-	none)
-		;;
-
-	*)
-		echo "$name: no remote access ('encryption' not configured)" 1>&2
-		return 1
-		;;
-	esac
-
-	# Optional RADIUS authorization and accounting for Anyfi.net
-	config_get autz_server "$vif" anyfi_autz_server
-	config_get autz_port   "$vif" anyfi_autz_port
-	config_get autz_secret "$vif" anyfi_autz_secret
-
-	config_get acct2_server "$vif" anyfi_acct_server
-	config_get acct2_port   "$vif" anyfi_acct_port
-	config_get acct2_secret "$vif" anyfi_acct_secret
-
-	config_get radius_nasid "$vif" radius_nasid
-
-	# Generate common config file options
-	cat <<EOF
-ssid = '$ssid'
-bridge = br-$net
-auth_proto = $auth_proto
-EOF
-
-	# Generate dependent config file options
-	[ "$isolate" = 1     ] && echo "isolation = 1"
-	[ -n "$ifname"       ] && echo "local_ap = $ifname"
-	[ -n "$auth_mode"    ] && echo "auth_mode = $auth_mode"
-	[ -n "$auth_cache"   ] && echo "auth_cache = $auth_cache"
-	[ -n "$rsn_ciphers"  ] && echo "rsn_ciphers = $rsn_ciphers"
-	[ -n "$wpa_ciphers"  ] && echo "wpa_ciphers = $wpa_ciphers"
-	[ -n "$group_rekey"  ] && echo "group_rekey = $group_rekey"
-	[ -n "$passphrase"   ] && echo "passphrase = '$passphrase'"
-	[ -n "$radius_nasid" ] && echo "radius_nas_id = $radius_nas_id"
-	if [ -n "$auth_server"  ] && [ -n "$auth_secret" ]; then
-		echo "radius_auth_server = $auth_server"
-		echo "radius_auth_port = ${auth_port:-1812}"
-		echo "radius_auth_secret = $auth_secret"
-	fi
-	if [ -n "$acct_server"  ] && [ -n "$acct_secret" ]; then
-		echo "radius_acct_server = $acct_server"
-		echo "radius_acct_port = ${acct_port:-1813}"
-		echo "radius_acct_secret = $acct_secret"
-	fi
-	if [ -n "$autz_server"  ] && [ -n "$autz_secret" ]; then
-		echo "radius_autz_server = $autz_server"
-		echo "radius_autz_port = ${autz_port:-1812}"
-		echo "radius_autz_secret = $autz_secret"
-	fi
-	if [ -n "$acct2_server"  ] && [ -n "$acct2_secret" ]; then
-		echo "radius_acct2_server = $acct2_server"
-		echo "radius_acct2_port = ${acct2_port:-1813}"
-		echo "radius_acct2_secret = $acct2_secret"
-	fi
-	return 0
-}
-
-# Get the current value from a myfid configuration file.
-# anyfi_vif_get_config <file> <config>
-anyfi_vif_get_config() {
-	local file="$1"
-	local key="$2"
-
-	[ -e "$file" ] || return 1
-
-	# Assume the format is exactly "key = value",
-	# where value may or may not be in ''
-	grep "$key = " $file | cut -d '=' -f2- | cut -b2- | \
-		               sed -e "/^'.*'$/s/^'\\(.*\\)'$/\\1/"
-}
-
-# Start the Anyfi.net tunnel-termination daemon myfid on an interface.
-# anyfi_vif_start <vif> <controller> <controller_key> <optimizer_key>
-anyfi_vif_start()
-{
-	local vif="$1"
-	local controller="$2"
-	local controller_key="$3"
-	local optimizer_key="$4"
-
-	local name="$(anyfi_vif_get_name $vif)"
-	local pid_file="$RUNDIR/myfid_$name.pid"
-	local conf_file="$CONFDIR/myfid_$name.conf"
-	local new_conf_file="$RUNDIR/myfid_$name.conf"
-
-	# GENERATE a config file for myfid
-	if (anyfi_vif_gen_config $vif) > $new_conf_file; then
-		local controller_key optimizer_key
-		local key old_key wanif port
-		local args=""
-
-		config_get key "$vif" key
-		config_get wanif "$vif" anyfi_iface
-		config_get port "$vif" anyfi_port
-
-		# ADD optional arguments
-		[ -n "$wanif" ] && args="$args --bind-if=$wanif"
-		[ -n "$port"  ] && args="$args --bind-port=$port"
-		[ -n "$controller_key" ] && \
-			args="$args --controller-key=$controller_key"
-		[ -n "$optimizer_key" ] && \
-			args="$args --optimizer-key=$optimizer_key"
-
-		# ADD the --reset flag to myfid arguments if the passphrase
-		# has changed or myfid is started for the first time
-		old_key="$(anyfi_vif_get_config $conf_file passphrase)"
-		[ "$key" == "$old_key" ] || args="$args --reset"
-
-		# Update the myfid config file in flash only if needed
-		if ! cmp -s $new_conf_file $conf_file; then
-			mv $new_conf_file $conf_file
-		else
-			rm -f $new_conf_file
-		fi
-
-		# START myfid
-		echo "$name: starting myfid"
-		/sbin/myfid --accept-license -C "$controller" -B -P $pid_file \
-		            $args $conf_file
-	fi
-}
-
-# Stop an Anyfi.net daemon gracefully
-# anyfi_stop_daemon <pidfile>
-anyfi_stop_daemon() {
-	local pidfile="$1"
-
-	kill -TERM $(cat $pidfile)
-	for t in $(seq 0 5); do
-		[ -e $pidfile ] || return 0
-		sleep 1
-	done
-
-	echo "Timeout waiting for daemon assocated with $pidfile to exit" 1>&2
-	kill -KILL $(cat $pidfile)
-	rm -f $pidfile
-	return 1
-}
-
-# Enable Anyfi.net for a Wi-Fi device.
-# Run from ENABLE_HOOKS
-anyfi_enable()
-{
-	local device="$1"
-	local controller
-	local type vif vifs
-
-	# A controller IP or FQDN is required
-	controller="$(uci get anyfi.controller.hostname 2>/dev/null)"
-	[ -n "$controller" ] || return 0
-
-	# Optional controller and optimizer public keys
-	controller_key="$(uci get anyfi.controller.key 2>/dev/null)"
-	optimizer_key="$(uci get anyfi.optimizer.key 2>/dev/null)"
-
-	# Reload the wireless config to get the assigned ifnames right
-	config_load wireless
-	config_get type "$device" type
-	vifs=$(anyfi_get_vifs "$device")
-
-	# START anyfid on this device
-	if [ "$(config_get $device anyfi_disabled)" != 1 ] && \
-	   /sbin/anyfi-probe "$type"
-	then
-		anyfi_dev_start $device $type "$controller" "$controller_key"
-	fi
-
-	# FOREACH Wi-Fi interface of this device
-	for vif in $vifs; do
-		if [ "$(config_get $vif disabled)" != 1 ] && \
-		   [ "$(config_get $vif anyfi_disabled)" != 1 ]
-		then
-			anyfi_vif_start $vif "$controller" \
-				        "$controller_key" "$optimizer_key"
-		fi
-	done
-}
-
-# Disable Anyfi.net for a Wi-Fi device.
-# Run from DISABLE_HOOKS
-anyfi_disable()
-{
-	local device="$1"
-	local type vif vifs
-
-	# Reload the wireless config to get the assigned ifnames right
-	config_load wireless
-	config_get type "$device" type
-	vifs=$(anyfi_get_vifs "$device")
-
-	# STOP anyfid on this device (if anyfid is running)
-	if [ -e $RUNDIR/anyfid_$device.pid ]; then
-		echo "$device: stopping anyfid"
-		anyfi_stop_daemon $RUNDIR/anyfid_$device.pid
-		anyfi_${type}_release_iflist $device
-		anyfi_${type}_release_monitor $device
-	fi
-
-	# FOREACH Wi-Fi interface of this device (with myfid running)
-	for vif in $vifs; do
-		local name="$(anyfi_vif_get_name $vif)"
-		local pidfile="$RUNDIR/myfid_$name.pid"
-
-		if [ -e $pidfile ]; then
-			echo "$name: stopping myfid"
-			anyfi_stop_daemon $pidfile
-		fi
-	done
-}

anyfi/files/lib/network/anyfi_broadcom.sh

@@ -1,86 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2013-2014 Anyfi Networks AB.
-# Anyfi.net setup functions for Broadcom wl driver.
-
-# Get monitor name interface based for a device.
-# anyfi_dev_monitor_name <device>
-anyfi_broadcom_name_monitor() {
-	local device="$1"
-
-	# Map wlX => radiotapX
-	echo "$device" | sed 's/^.*\([0-9]\)$/radiotap\1/'
-}
-
-# Get BSS index of the last wl interface that is used (=up)
-# wl0.2 => 2
-# wl0   => (empty)
-anyfi_broadcom_get_wlindex() {
-	ifconfig | grep -o "^$1\..." | cut -d'.' -f2 | sort -n | tail -n 1
-}
-
-# Allocate virtual Wi-Fi interfaces for anyfid.
-# anyfi_broadcom_alloc_iflist <device> <bssids>
-anyfi_broadcom_alloc_iflist() {
-	local device="$1"
-	local bssids="$2"
-	local count=0
-	local wlindex num
-
-	# Enable MBSS mode if not already enabled
-	if [ "$(wlctl -i $device mbss)" = 0 ]; then
-		wlctl -i $device down
-		wlctl -i $device mbss 1
-		wlctl -i $device up
-	fi
-
-	wlindex=$(anyfi_broadcom_get_wlindex $device)
-
-	# Create WLAN interfaces and let the driver assign the BSSIDs
-	for num in $(seq $bssids); do
-		local idx=$(($wlindex + $num))
-		local wlif=$device.$idx
-
-		# Do the 'wlctl' dance to make the driver assign proper BSSIDs
-		wlctl -i $device bss -C $idx up > /dev/null || break
-		wlctl -i $device ssid -C $idx "dummy" > /dev/null
-		wlctl -i $device bss -C $idx up > /dev/null
-		wlctl -i $device bss -C $idx down > /dev/null
-		wlctl -i $device ssid -C $idx "" > /dev/null
-
-		local bssid=$(wlctl -i $wlif cur_etheraddr | cut -d' ' -f2)
-		ifconfig $wlif hw ether $bssid > /dev/null
-		count=$(($count + 1))
-	done
-
-	[ "$count" -gt 0 ] && echo $device.$(($wlindex + 1))/$count
-}
-
-# Release virtual Wi-Fi interfaces allocated for anyfid.
-# anyfi_broadcom_release_iflist <device>
-anyfi_broadcom_release_iflist() {
-	true
-}
-
-# Allocate a monitor interface for anyfid.
-# anyfi_broadcom_alloc_monitor <device>
-anyfi_broadcom_alloc_monitor() {
-	local device="$1"
-	local monitor=$(anyfi_broadcom_name_monitor $device)
-
-	wlctl -i $device monitor 0 || return 1
-	wlctl -i $device monitor 3 || return 1
-	ifconfig $monitor down || return 1
-	ifconfig $monitor up || return 1
-	echo $monitor
-}
-
-# Release the monitor interface for anyfid.
-# anyfi_broadcom_release_monitor <device>
-anyfi_broadcom_release_monitor() {
-	local device="$1"
-	local monitor=$(anyfi_broadcom_name_monitor $device)
-
-	ifconfig $monitor down 2> /dev/null
-	wlctl -i $device monitor 0 2> /dev/null
-}

anyfi/files/sbin/anyfi-probe

@@ -1,58 +0,0 @@
-#!/bin/sh
-
-if [ $# -lt 1 ]; then
-    echo "Check if a WLAN driver type is supported by Anyfi.net radio software."
-    echo "Usage: $0 {mac80211|...}"
-    exit 1
-fi
-
-number() {
-    echo $2 | sed -e 's/[^0-9]/ /g' | cut -d' ' -f $1
-}
-
-major() {
-    number 1 $1
-}
-
-minor() {
-    number 2 $1
-}
-
-case $1 in
-    mac80211)
-	COMPAT_VER=$(opkg list-installed kmod-mac80211 | cut -d'+' -f2)
-	KERNEL_VER=$(uname -r)
-
-        # Future kernels > 3.x are OK
-	[ "$(major $KERNEL_VER)" -gt 3  ] && return 0
-
-        # The required commit 86c228a7627f3f2776893da47592234140fbfba8
-        # for mac80211 support was introduced in kernel 3.12.
-	[ "$(major $KERNEL_VER)" -eq  3 ] && \
-	[ "$(minor $KERNEL_VER)" -ge 12 ] && return 0
-
-	[ "$(major $COMPAT_VER)" -gt 2013 ] && return 0
-	[ "$(major $COMPAT_VER)" -eq 2013 ] && \
-	[ "$(minor $COMPAT_VER)" -ge   11 ] && return 0
-
-      cat <<EOF
-Support for mac80211 requires Linux kernel >= 3.12 or
-compat-wireless >= 2013-11-05. Please update your system.
-EOF
-      ;;
-
-    broadcom)
-	return 0
-	;;
-
-   *)
-      cat<<EOF
-WLAN driver \"$1\" is not supported by the Anyfi.net radio software.
-Improved drivers with Anyfi.net support are available for Broadcom,
-Qualcomm Atheros, Ralink and Realtek chipsets. Please contact
-support@anyfi.net for updated drivers, reference integrations and
-commercial integration services.
-EOF
-      ;;
-esac
-exit 1

asterisk-1.8.x-mod/Makefile

@@ -0,0 +1,802 @@
+#
+# Copyright (C) 2008-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=asterisk18-mod
+PKG_VERSION:=1.8.10.1
+
+PKG_SOURCE_VERSION:=015d279241d0ac5d8c1321aa6f78b9ae551575d1
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
+
+PKG_RELEASE:=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+-include $(INCLUDE_DIR)/ltqtapi.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Package/asterisk18-mod/Default
+  SUBMENU:=Telephony
+  SECTION:=net
+  CATEGORY:=Network
+  URL:=http://www.asterisk.org/
+endef
+
+define Package/asterisk18-mod/Default/description
+ Asterisk is a complete PBX in software. It provides all of the features
+ you would expect from a PBX and more. Asterisk does voice over IP in three
+ protocols, and can interoperate with almost all standards-based telephony
+ equipment using relatively inexpensive hardware.
+endef
+
+
+define Package/asterisk18-mod
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Complete open source PBX, v1.8x
+  MENU:=1
+  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen +libopenssl +libncurses +libpopt +libpthread +uci +ubus +zlib @!TARGET_avr32
+endef
+
+define Package/asterisk18-mod/description
+$(call Package/asterisk18-mod/Default/description)
+endef
+
+define Package/asterisk18-mod-sounds
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Sound files
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-sounds/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains sound files for Asterisk.
+endef
+
+define Package/asterisk18-mod-voicemail
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voicemail support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-voicemail/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains voicemail related modules for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-transfer
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Call transfer support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-transfer/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the call transfer support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-softhangup
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SoftHangup application
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-softhangup/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the SoftHangup support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-meetme
+$(call Package/asterisk18-mod/Default)
+  TITLE:=conferencing support
+  DEPENDS:= asterisk18-mod +dahdi-tools-libtonezone +dahdi
+endef
+
+define Package/asterisk18-mod-app-meetme/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the MeetMe application driver Conferencing support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-iax2
+$(call Package/asterisk18-mod/Default)
+  TITLE:=IAX support
+  DEPENDS:= asterisk18-mod +asterisk18-res-crypto
+endef
+
+define Package/asterisk18-mod-chan-iax2/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides IAX support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-cdr
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CDR support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-cdr/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Call Detail Record support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-musiconhold
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MOH support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-musiconhold/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Music On Hold support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-voice
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voice client/pbx support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-voice/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Voice Client/pbx support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-srtp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SRTP support
+  DEPENDS:= asterisk18-mod libsrtp +asterisk18-mod-res-crypto
+endef
+
+define Package/asterisk18-mod-res-srtp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides SRTP support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-stun
+$(call Package/asterisk18-mod/Default)
+  TITLE:=STUN support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-queue
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Queue support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-gtalk
+$(call Package/asterisk18-mod/Default)
+  TITLE:=GTalk support
+  DEPENDS:= asterisk18-mod +libiksemel
+endef
+
+define Package/asterisk18-mod-chan-gtalk/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_gtalk and res_jabber for GTalk
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-mobile
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Mobile channel support
+  DEPENDS:= asterisk18-mod +bluez-libs
+endef
+
+define Package/asterisk18-mod-chan-mobile/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mobile support to Asterisk.
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd
+$(call Package/asterisk18-mod/Default)
+  TITLE:= Timerfd Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-timing-pthread
+$(call Package/asterisk18-mod/Default)
+  TITLE:= pthread Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-fax
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Generic FAX Resource for FAX technology resource modules
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-timing-pthread
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Spandsp T.38 and G.711 FAX Resource
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-fax +libspandsp
+endef
+
+define Package/asterisk18-mod-chan-mgcp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MGCP channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-mgcp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mgcp support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-skinny
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Skinny channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-skinny/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_skinny support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-brcm
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Broadcom channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-brcm/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_brcm support to Asterisk.
+endef
+
+define Package/asterisk18-mod-curl
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CURL support
+  DEPENDS:= asterisk18-mod +libcurl
+endef
+
+define Package/asterisk18-mod-curl/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides CURL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-mysql
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MySQL support
+  DEPENDS:= asterisk18-mod +PACKAGE_asterisk18-mysql:libmysqlclient
+endef
+
+define Package/asterisk18-mod-mysql/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides MySQL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-lantiq
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Lantiq TAPI support
+  DEPENDS:= asterisk18-mod $(LTQ_TAPI_DEPENDS)
+  URL:=http://git.nanl.de/?p=asterisk_channel_lantiq.git
+  MAINTAINER:=Mirko Vogt <mirko@openwrt.org>
+endef
+
+define Package/asterisk18-mod-chan-lantiq/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_lantiq support to Asterisk.
+endef
+
+CONFIGURE_ARGS+= \
+	--without-inotify
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-app-meetme),)
+  CONFIGURE_ARGS+= \
+	--with-dahdi="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-dahdi
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-gtalk),)
+  CONFIGURE_ARGS+= \
+	--with-gnutls="$(STAGING_DIR)/usr" \
+	--with-iksemel="$(STAGING_DIR)/usr"
+  SITE_VARS+= \
+	ac_cv_lib_iksemel_iks_start_sasl=yes \
+	ac_cv_lib_gnutls_gnutls_bye=yes
+else
+  CONFIGURE_ARGS+= \
+	--without-gnutls \
+	--without-iksemel
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-curl),)
+  CONFIGURE_ARGS+= \
+	--with-curl="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-curl
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-mysql),)
+  CONFIGURE_ARGS+= \
+	--with-mysqlclient="$(STAGING_DIR)/usr/bin"
+else
+  CONFIGURE_ARGS+= \
+	--without-mysqlclient
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-fax-spandsp),)
+  CONFIGURE_ARGS+= \
+    --with-spandsp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+    --without-spandsp
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-mobile),)
+  CONFIGURE_ARGS+= \
+	--with-bluetooth="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-bluetooth
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
+  CONFIGURE_ARGS+= \
+	--with-srtp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-srtp
+endif
+
+ifeq ($(CONFIG_TARGET_IBOARDID),"D301")
+  EXTRA_CFLAGS += -DNTR_SUPPORT
+endif
+
+CONFIGURE_ARGS+= \
+	--without-curses \
+	--with-gsm=internal \
+	--without-cap \
+	--without-gtk \
+	--without-gtk2 \
+	--without-isdnnet \
+	--without-kde \
+	--without-misdn \
+	--without-nbs \
+	--with-ncurses="$(STAGING_DIR)/usr" \
+	--without-netsnmp \
+	--without-newt \
+	--without-odbc \
+	--without-ogg \
+	--without-osptk \
+	--with-popt="$(STAGING_DIR)/usr" \
+	--without-pri \
+	--without-qt \
+	--without-radius \
+	--without-sdl \
+	--without-suppserv \
+	--without-tds \
+	--without-termcap \
+	--without-tinfo \
+	--without-vorbis \
+	--without-vpb \
+	--with-z="$(STAGING_DIR)/usr" \
+	--with-sounds-cache="$(DL_DIR)" \
+	--disable-xmldoc
+
+# I've had strange errors with -fno-caller-saves
+# in global CFLAGS so revert it. /Ronny
+EXTRA_CFLAGS+= -O2 -fcaller-saves
+EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
+EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)
+
+
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+ifneq ($(CONFIG_TARGET_lantiq),)
+	$(CP) ./src-lantiq/* $(PKG_BUILD_DIR)/
+endif
+endef
+
+define Build/Configure
+	-rm $(PKG_BUILD_DIR)/menuselect.makeopts
+	$(call Build/Configure/Default,,$(SITE_VARS))
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		include/asterisk/version.h \
+		include/asterisk/buildopts.h defaults.h \
+		makeopts.embed_rules
+	ASTCFLAGS="$(EXTRA_CFLAGS) -DLOW_MEMORY" \
+	ASTLDFLAGS="$(EXTRA_LDFLAGS)" \
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		ASTVARLIBDIR="/usr/lib/asterisk" \
+		ASTDATADIR="/usr/lib/asterisk" \
+		ASTKEYDIR="/usr/lib/asterisk" \
+		ASTDBDIR="/usr/lib/asterisk" \
+		NOISY_BUILD="1" \
+		DEBUG="" \
+		OPTIMIZE="" \
+		DESTDIR="$(PKG_INSTALL_DIR)" \
+		all install samples
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk/*.h $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk.h $(1)/usr/include/asterisk-1.8/include/
+endef
+
+define Package/asterisk18-mod/conffiles
+/etc/asterisk/asterisk.conf
+/etc/asterisk/modules.conf
+/etc/asterisk/extensions.conf
+/etc/asterisk/sip.conf
+/etc/asterisk/sip_notify.conf
+/etc/asterisk/features.conf
+/etc/asterisk/indications.conf
+/etc/asterisk/logger.conf
+/etc/asterisk/manager.conf
+/etc/asterisk/rtp.conf
+/etc/default/asterisk
+/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod/install
+	$(INSTALL_DIR) $(1)/etc/asterisk/ssl
+	for f in asterisk extensions features \
+		indications logger manager modules \
+		sip sip_notify rtp; do \
+		$(CP) $(PKG_INSTALL_DIR)/etc/asterisk/$$$$f.conf $(1)/etc/asterisk/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	for f in app_dial app_echo app_playback app_macro \
+		chan_sip res_rtp_asterisk res_rtp_multicast \
+		codec_ulaw codec_gsm \
+		format_gsm format_pcm format_wav format_wav_gsm \
+		pbx_config \
+		func_strings func_timeout func_callerid func_logic; do \
+		$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$$$$f.so $(1)/usr/lib/asterisk/modules/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/asterisk $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/default
+	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod-sounds/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/* $(1)/usr/lib/asterisk/sounds/
+	rm -f $(1)/usr/lib/asterisk/sounds/vm-*
+	rm -f $(1)/usr/lib/asterisk/sounds/conf-*
+endef
+
+
+define Package/asterisk18-mod-voicemail/conffiles
+/etc/asterisk/voicemail.conf
+endef
+
+define Package/asterisk18-mod-voicemail/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/voicemail.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*voicemail.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_adsi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_smdi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/vm-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-app-meetme/conffiles
+/etc/asterisk/meetme.conf
+endef
+
+define Package/asterisk18-mod-app-meetme/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/meetme.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_meetme.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/conf-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-chan-iax2/conffiles
+/etc/asterisk/iax.conf
+/etc/asterisk/iaxprov.conf
+endef
+
+define Package/asterisk18-mod-cdr/conffiles
+/etc/asterisk/cdr.conf
+/etc/asterisk/cdr_custom.conf
+/etc/asterisk/cdr_manager.conf
+/etc/asterisk/cdr_odbc.conf
+/etc/asterisk/cdr_pgsql.conf
+/etc/asterisk/cdr_tds.conf
+endef
+
+define Package/asterisk18-mod-res-musiconhold/conffiles
+/etc/asterisk/musiconhold.conf
+endef
+
+define Package/asterisk18-mod-chan-iax2/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iax.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iaxprov.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_iax2.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-cdr/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr*.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*cdr*.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-musiconhold/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/musiconhold.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_musiconhold.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-voice/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_voice.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-gtalk/conffiles
+/etc/asterisk/gtalk.conf
+/etc/asterisk/jabber.conf
+endef
+
+define Package/asterisk18-mod-chan-gtalk/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/gtalk.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/jabber.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_gtalk.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-mobile/conffiles
+/etc/asterisk/chan_mobile.conf
+endef
+
+define Package/asterisk18-mod-chan-mobile/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/chan_mobile.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mobile.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-pthread/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_pthread.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax/conffiles
+/etc/asterisk/res_fax.conf
+endef
+
+define Package/asterisk18-mod-res-fax/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_fax.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax_spandsp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-mgcp/conffiles
+/etc/asterisk/mgcp.conf
+endef
+
+define Package/asterisk18-mod-chan-mgcp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/mgcp.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mgcp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-skinny/conffiles
+/etc/asterisk/skinny.conf
+endef
+
+define Package/asterisk18-mod-chan-skinny/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/skinny.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_skinny.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-brcm/conffiles
+/etc/asterisk/brcm.conf
+endef
+
+define Package/asterisk18-mod-chan-brcm/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/brcm.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_brcm.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-curl/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/func_curl.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_curl.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-transfer/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_transfer.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-softhangup/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_softhangup.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-mysql/conffiles
+/etc/asterisk/app_mysql.conf
+/etc/asterisk/res_config_mysql.conf
+/etc/asterisk/cdr_mysql.conf
+endef
+
+define Package/asterisk18-mod-mysql/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/app_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_config_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/cdr_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_config_mysql.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-lantiq/conffiles
+/etc/asterisk/lantiq.conf
+endef
+
+define Package/asterisk18-mod-chan-lantiq/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/lantiq.conf $(1)/etc/asterisk/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_lantiq.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-srtp/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_srtp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-stun/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_stun_monitor.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-queue/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_queue.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Buildasterisk18-modModuleTemplate
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))
+  $$(call Package/asterisk18-mod/Default)
+    TITLE:=$(2) support
+    DEPENDS:= asterisk18-mod $(4)
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/description
+  $$(call Package/asterisk18-mod/Default/description)
+    This package provides support $(3) in Asterisk.
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/install
+	$(INSTALL_DIR) $$(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$(1).so $$(1)/usr/lib/asterisk/modules/
+  endef
+
+  $$(eval $$(call BuildPackage,asterisk18-mod-$(subst _,-,$(1))))
+endef
+
+$(eval $(call BuildPackage,asterisk18-mod))
+$(eval $(call BuildPackage,asterisk18-mod-voicemail))
+$(eval $(call BuildPackage,asterisk18-mod-sounds))
+$(eval $(call BuildPackage,asterisk18-mod-app-meetme))
+$(eval $(call BuildPackage,asterisk18-mod-app-transfer))
+$(eval $(call BuildPackage,asterisk18-mod-app-softhangup))
+$(eval $(call BuildPackage,asterisk18-mod-chan-iax2))
+$(eval $(call BuildPackage,asterisk18-mod-cdr))
+$(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
+$(eval $(call BuildPackage,asterisk18-mod-res-voice))
+$(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mobile))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-pthread))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mgcp))
+$(eval $(call BuildPackage,asterisk18-mod-chan-skinny))
+$(eval $(call BuildPackage,asterisk18-mod-chan-brcm))
+$(eval $(call BuildPackage,asterisk18-mod-curl))
+$(eval $(call BuildPackage,asterisk18-mod-mysql))
+$(eval $(call BuildPackage,asterisk18-mod-chan-lantiq))
+$(eval $(call BuildPackage,asterisk18-mod-res-srtp))
+$(eval $(call BuildPackage,asterisk18-mod-res-stun))
+$(eval $(call BuildPackage,asterisk18-mod-app-queue))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_authenticate,Authenticate,support for executing arbitrary authenticate commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanisavail,Channel availability check,support for checking if a channel is available))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanspy,Channel listen in,support for listening in on any channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_directed_pickup,Directed call pickup,support for directed call pickup))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_exec,Exec application,support for application execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_minivm,Minimal voicemail system,a voicemail system in small building blocks working together based on the Comedian Mail voicemail system))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_readexten,Extension to variable,a trivial application to read an extension into a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_read,Variable read,a trivial application to read a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sayunixtime,Say Unix time,an application to say Unix time))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sms,SMS,SMS support (ETSI ES 201 912 protocol 1)))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_stack,Stack applications, stack applications Gosub Return etc., +asterisk18-res-agi))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_system,System exec,support for executing system commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_talkdetect,File playback with audio detect,for file playback with audio detect))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_waituntil,Sleep,support sleeping until the given epoch))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_while,While loop,a while loop implementation))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_agent,Agents proxy channel, an implementation of agents proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_local,Local proxy channel, an implementation of local proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_alaw,Signed linear to alaw translation,translation between signed linear and alaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ulaw,Signed linear to ulaw translation,translation between signed linear and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_a_mu,Alaw to ulaw translation,translation between alaw and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g722,G.722,a high bit rate 48/56/64Kbps ITU standard codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g726,Signed linear to G.726 translation,translation between signed linear and ITU G.726-32kbps codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ilbc,iLBC,internet Low Bitrate Codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_gsm,GSM,GSM codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g726,G.726,support for headerless G.726 16/24/32/40kbps data format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g729,G.729,support for raw headerless G729 data))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln,Raw slinear format,support for raw slinear format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln16,Raw slinear 16 format,support for Raw slinear 16 format))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_db,Database interaction,functions for interaction with the database))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_devstate,Blinky lights control,functions for manually controlled blinky lights))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_vmcount,vmcount dialplan,a vmcount dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_extstate,Hinted extension state,retrieving the state of a hinted extension for dialplan control))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_global,Global variable,global variable dialplan functions))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_shell,Shell,support for shell execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_ael,Asterisk Extension Logic,support for symbolic Asterisk Extension Logic))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_ael_share,Shareable AEL code,support for shareable AEL code mainly between internal and external modules))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_spool,Call Spool,outgoing call spool support))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_agi,Asterisk Gateway Interface,support for the Asterisk Gateway Interface extension))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_crypto,Provide Crypto,Cryptographic Signature capability))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_alarmreceiver,Alarm receiver,Central Station Alarm receiver for Ademco Contact ID))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_setcallerid,Set callerid,support for setting callerid))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_verbose,Verbose logging,Verbose logging application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_channel,Channel info,Channel info dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_blacklist,Blacklist on callerid,looking up the callerid number and see if it is blacklisted))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_originate,Originate a call,originating an outbound call and connecting it to a specified extension or application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_uri,URI encoding and decoding,Encodes and decodes URI-safe strings))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_disa,Direct Inward System Access,Direct Inward System Access))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_senddtmf,Send DTMF digits,Sends arbitrary DTMF digits))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_cut,CUT function,CUT function))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_clioriginate,Calls via CLI,Originate calls via the CLI))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_mixmonitor,Record a call and mix the audio,record a call and mix the audio during the recording))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_playtones,Playtones application,play a tone list))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_record,Record sound file,to record a sound file))

asterisk-1.8.x-mod/files/asterisk.default

@@ -0,0 +1,4 @@
+## startup options for /etc/init.d/asterisk
+
+ENABLE_ASTERISK="yes"
+OPTIONS=""

asterisk-1.8.x-mod/files/asterisk.init

@@ -0,0 +1,57 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+STOP=10
+
+USE_PROCD=1
+NAME=asterisk
+PROG=/usr/sbin/asterisk
+DEFAULT=/etc/default/asterisk
+
+init_asterisk() {
+	# do not start asterisk until the
+	# router receives a default route
+	while ! ip r | grep -q default; do
+		sleep 1
+	done
+
+	[ -f $DEFAULT ] && . $DEFAULT
+	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
+	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
+        [ -d /var/spool/asterisk ] || mkdir -p /var/spool/asterisk
+
+        # does the board have a fxs relay?
+        local fxsRelayGpio=$(db -q get hw.board.fxsRelayGpio)
+        if [ "$fxsRelayGpio" != "" ]; then
+                /sbin/brcm_fw_tool set -x $fxsRelayGpio -p 1
+        fi
+}
+
+service_triggers() {
+        procd_add_reload_trigger voice_client
+}
+
+start_service() {
+	init_asterisk
+
+	procd_open_instance
+	procd_set_param command "$PROG" -f
+	procd_set_param respawn
+	procd_close_instance
+#	service_start /usr/sbin/asterisk
+}
+
+reload_service() {
+	asterisk -rx "core reload"
+	asterisk -rx "dialplan reload"
+	asterisk -rx "brcm reload"
+}
+
+restart() {
+	reload
+}
+
+stop_service() {
+        service_stop /usr/sbin/asterisk
+}
+

bluez/Makefile

@@ -0,0 +1,81 @@
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bluez
+PKG_VERSION:=5.28
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_SOURCE_URL:=http://www.kernel.org/pub/linux/bluetooth
+PKG_MD5SUM:=bc20a8285530758c68f6a60e4ca62a15
+
+PKG_FIXUP:=autoreconf
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/bluez
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libpthread +libusb-compat +glib2 +dbus +libreadline $(INTL_DEPENDS) $(ICONV_DEPENDS) 
+  TITLE:=Bluetooth stack new version 
+  URL:=http://www.bluez.org/
+endef
+
+define Package/bluez/conffiles
+/etc/config/bluetooth
+endef
+
+TARGET_LDFLAGS+= \
+                -Wl,-rpath-link=$(STAGING_DIR)/usr/lib/libiconv-full/lib \
+
+CONFIGURE_ARGS += \
+		--enable-shared \
+		--disable-cups \
+		--enable-debug \
+		--disable-test \
+		--disable-obex \
+		--disable-systemd \
+		--disable-udev \
+		--enable-tools \
+		--enable-experimental \
+		--enable-library \
+		--disable-static \
+
+define Build/Compile
+    $(MAKE) -C $(PKG_BUILD_DIR) \
+        LDFLAGS="$(TARGET_LDFLAGS) \
+            -L$(ICONV_PREFIX)/lib \
+            -L$(INTL_PREFIX)/lib -lm -lncurses" \
+        DESTDIR="$(PKG_INSTALL_DIR)" \
+        all install
+endef
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/bluetooth/*.h $(1)/usr/include/bluetooth
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libbluetooth.* $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/bluez.pc $(1)/usr/lib/pkgconfig/
+endef
+define Package/bluez/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_INSTALL_DIR)/usr/bin/* $(1)/usr/bin/
+
+	$(INSTALL_DIR) $(1)/etc/bluetooth
+	$(INSTALL_DIR) $(1)/etc/dbus-1/system.d
+	$(CP)  $(PKG_INSTALL_DIR)/etc/dbus-1/system.d/bluetooth.conf $(1)/etc/dbus-1/system.d/
+
+	$(INSTALL_DIR) $(1)/usr/lib/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/bluetooth/* $(1)/usr/lib/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libblue* $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,bluez))

bootchart2/Makefile

@@ -0,0 +1,43 @@
+# 
+# Copyright (C) 2007-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bootchart2
+PKG_VERSION:=0.14.7
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/mmeeks/bootchart.git
+PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/bootchart2
+ SECTION:=base
+ CATEGORY:=Utilities
+ TITLE:=Bootchart2
+ URL:=https://github.com/mmeeks/bootchart
+endef
+
+define Package/bootchart2/description
+ Bootchart is a tool for performance analysis and visualization of the GNU/Linux boot process. 
+endef
+
+define Package/bootchart2/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bootchart-collector $(1)/sbin
+	$(CP) ./files/* $(1)/
+endef
+
+
+
+
+$(eval $(call BuildPackage,bootchart2))

bootchart2/files/lib/preinit/11_bootchart

@@ -0,0 +1,10 @@
+
+do_bootchart()
+{
+	[ -f /dev/null ] || mknod /dev/null c 1 3
+	mkdir -p /lib/bootchart/tmpfs
+	echo "starting bootchart"
+	/sbin/bootchart_run_preinit boot &
+}
+
+boot_hook_add preinit_essential do_bootchart

bootchart2/files/lib/preinit/72_bootchart

@@ -0,0 +1,7 @@
+
+bootchart_rootfs_pivot()
+{
+	mount -o move /rom/lib/bootchart/tmpfs /lib/bootchart/tmpfs	
+}
+
+boot_hook_add preinit_mount_root bootchart_rootfs_pivot

bootchart2/files/sbin/bootchart_run_preinit

@@ -0,0 +1,59 @@
+ #! /bin/sh
+# this is intended to be started in preinit.
+# 11_bootchart, starts it
+# 72_bootchart, fixup mount point after pivot 
+#
+# program can be killed early with
+# bootchart_run_preinit stop
+
+trap "stop; exit 0;" SIGINT SIGTERM 
+
+STOP_AFTER=250
+HZ=50
+
+if [ -z "$1" ]
+then
+	echo "you need to specify start or stop"
+	exit 1
+fi
+
+start()
+{
+	/sbin/bootchart-collector $HZ &
+}
+
+stop()
+{
+	echo "bootchart DUMP"
+	
+	mkdir /tmp/bootchart
+	/sbin/bootchart-collector --dump /tmp/bootchart
+	cd /tmp/bootchart
+	tar -zcf /tmp/bootchart.tgz header *.log
+	cd /
+	rm -rf /tmp/bootchart
+}
+
+case $1 in
+    boot) # secret option for preinit
+	start
+	sleep $STOP_AFTER
+	# test to see if someone has manually killed us
+	if [ -f /tmp/bootchart.tgz ]
+	then
+	    exit 0
+	fi
+	stop
+	;;
+    start)
+	start
+	;;
+    stop)
+	stop
+	;;
+    *)
+	echo "you need to specify start or stop, not $1"
+	exit 1
+	;;
+esac
+

bootchart2/patches/0001-add_spu_sys_time.patch

@@ -0,0 +1,40 @@
+diff --git a/pybootchartgui/draw.py b/pybootchartgui/draw.py
+index 7c3f60c..5c9f046 100644
+--- a/pybootchartgui/draw.py
++++ b/pybootchartgui/draw.py
+@@ -63,6 +63,7 @@ AXIS_FONT_SIZE = 11
+ LEGEND_FONT_SIZE = 12
+ 
+ # CPU load chart color.
++CPU_SYS_COLOR = (0.65, 0.13, 0.36, 1.0)
+ CPU_COLOR = (0.40, 0.55, 0.70, 1.0)
+ # IO wait chart color.
+ IO_COLOR = (0.76, 0.48, 0.48, 0.5)
+@@ -300,21 +301,19 @@ def render_charts(ctx, options, clip, trace, curr_y, w, h, sec_w):
+ 	# render bar legend
+ 	ctx.set_font_size(LEGEND_FONT_SIZE)
+ 
+-	draw_legend_box(ctx, "CPU (user+sys)", CPU_COLOR, off_x, curr_y+20, leg_s)
+-	draw_legend_box(ctx, "I/O (wait)", IO_COLOR, off_x + 120, curr_y+20, leg_s)
++	draw_legend_box(ctx, "CPU (user)", CPU_COLOR, off_x, curr_y+20, leg_s)
++	draw_legend_box(ctx, "CPU (sys)", CPU_SYS_COLOR, off_x + 120, curr_y+20, leg_s)
++	draw_legend_box(ctx, "I/O (wait)", IO_COLOR, off_x + 120 + 120 , curr_y+20, leg_s)
+ 
+ 	# render I/O wait
+ 	chart_rect = (off_x, curr_y+30, w, bar_h)
+ 	if clip_visible (clip, chart_rect):
+ 		draw_box_ticks (ctx, chart_rect, sec_w)
+ 		draw_annotations (ctx, proc_tree, trace.times, chart_rect)
+-		draw_chart (ctx, IO_COLOR, True, chart_rect, \
+-			    [(sample.time, sample.user + sample.sys + sample.io) for sample in trace.cpu_stats], \
+-			    proc_tree, None)
++		draw_chart (ctx, IO_COLOR, True, chart_rect, [(sample.time, sample.user + sample.sys + sample.io) for sample in trace.cpu_stats], proc_tree, None)
+ 		# render CPU load
+-		draw_chart (ctx, CPU_COLOR, True, chart_rect, \
+-			    [(sample.time, sample.user + sample.sys) for sample in trace.cpu_stats], \
+-			    proc_tree, None)
++		draw_chart (ctx, CPU_SYS_COLOR, True, chart_rect, [(sample.time, sample.user + sample.sys) for sample in trace.cpu_stats], proc_tree, None)
++		draw_chart (ctx, CPU_COLOR, True, chart_rect, [(sample.time, sample.user ) for sample in trace.cpu_stats], proc_tree, None)
+ 
+ 	curr_y = curr_y + 30 + bar_h
+ 

btle_alarm/Makefile

@@ -0,0 +1,47 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=btle_alarm
+PKG_VERSION:=1.0.6
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=b505d7ae1524a213ca3de7f8ee15a7d51c6bbbd5
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/btle_alarm
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/btle_alarm
+  SECTION:=base
+  CATEGORY:=Utilities
+  TITLE:=Ethernet bridging configuration utility
+  #DESCRIPTION:=This variable is obsolete. use the Package/name/description define instead!
+  URL:=http://btle_alarm.sourceforge.net/
+  DEPENDS:=+bluez +libncurses
+endef
+
+define Package/btle_alarm/description
+ Ethernet bridging configuration utility
+ Manage ethernet bridging; a way to connect networks together to
+ form a larger network.
+endef
+
+define Package/btle_alarm/install
+
+	$(CP) ./files/* $(1)/
+
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/btle_alarm $(1)/sbin/
+
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DATA) ./files/btle_alarm.conf $(1)/etc/config/btle_alarm
+
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/etc/init.d/* $(1)/etc/init.d/
+
+endef
+
+$(eval $(call BuildPackage,btle_alarm))

btle_alarm/files/btle_alarm.conf

@@ -0,0 +1,2 @@
+config info 'Device'
+        option mac 'D0:39:72:B6:23:D6'

btle_alarm/files/etc/init.d/btle_alarm

@@ -0,0 +1,29 @@
+#!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+
+START=99
+
+start() {
+        for i in down reset up;do
+            hciconfig hci0 $i
+        done
+        mac=`uci get btle_alarm.Device.mac`
+        if [ $? -eq 0 ];then
+            hcitool lewladd $mac
+        else
+            hcitool lewladd D0:39:72:B6:43:8A
+            hcitool lewladd D0:39:72:B6:18:AA
+        fi
+       sleep 1
+        /sbin/btle_alarm &> /dev/null &
+        echo $! > /tmp/btle_alarm.pid
+}
+
+stop() {
+        hciconfig hci0 down
+        kill -9 `cat /tmp/btle_alarm.pid`
+        rm /tmp/btle_alarm.pid
+        sleep 1
+}

catv/Makefile

@@ -0,0 +1,30 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=catv
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/catv
+  CATEGORY:=Utilities
+  TITLE:=CATV
+endef
+
+define Package/catv/description
+	CATV configuration utility
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/catv/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,catv))

catv/files/etc/config/catv

@@ -0,0 +1,4 @@
+
+config service 'catv'
+        option enable 'no'
+        option filter '3'

catv/files/etc/init.d/catv

@@ -0,0 +1,26 @@
+#!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2015 inteno.org
+#
+
+START=71
+USE_PROCD=1
+
+. /lib/functions.sh
+
+start_service() {
+	local enable=0
+        local filter=0
+
+        config_load catv
+        config_get enable catv enable
+        config_get filter catv filter
+	ubus call catv set-enable "{\"enable\":\"$enable\"}"
+	ubus call catv set-filter "{\"filter\":\"$filter\"}"
+
+}
+
+service_triggers() {
+        procd_add_reload_trigger catv
+}
+

crashlog/Makefile

@@ -1,4 +1,3 @@
-#
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=crashlog

dectmngr/Makefile

@@ -0,0 +1,66 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.0.23
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=90aff0da98c626d58201c14c34b3b3a64878ceee
+PKG_NAME:=dectmngr
+
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint test application
+  URL:=
+  DEPENDS:= +libevent2 +libjson +natalie-dect-h bcmkernel
+endef
+
+define Package/dectmngr/description
+	Dect proxy, manager and tools
+endef
+
+
+define Package/dectmngr/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/dect
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+
+	cp $(PKG_BUILD_DIR)/dectmngr $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/atohx $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectproxy $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectdbgd $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectcalib $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect_testmode $(1)/usr/bin/
+	cp files/etc/init.d/* $(1)/etc/init.d/
+	cp files/etc/hotplug.d/dect/* $(1)/etc/hotplug.d/dect/
+	cp files/etc/dect/* $(1)/etc/dect/
+	cp files/etc/config/* $(1)/etc/config/
+	cp files/sbin/dectreg $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dectmngr))

dectmngr/files/etc/config/dect

@@ -0,0 +1,3 @@
+config dect 'dect'
+	option 'radio' 'auto'
+

dectmngr/files/etc/hotplug.d/dect/00-dectstate

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ "$ACTION" == "led_blink" ]; then
+    ubus call led.dect set '{"state":"notice"}'
+fi
+
+if [ "$ACTION" == "led_on" ]; then
+    ubus call led.dect set '{"state":"ok"}'
+fi
+
+if [ "$ACTION" == "led_off" ]; then
+    ubus call led.dect set '{"state":"off"}'
+fi
+
+

dectmngr/files/etc/init.d/dect

@@ -0,0 +1,60 @@
+#!/bin/sh /etc/rc.common
+
+START=97
+STOP=10
+USE_PROCD=1
+
+DEST=
+DEFAULT=
+OPTIONS=""
+
+
+start_service() {
+	# avoid fp timing problem
+	echo 1 > /proc/sys/kernel/printk_with_interrupt_enabled
+	
+	# setup board specific dect parameters
+	cat /proc/nvram/rfpi | tr -d ' ' | atohx > /tmp/rfpi
+	cat /proc/nvram/fixed_emc | tr -d ' ' | atohx > /tmp/fixed_emc
+	cat /proc/nvram/bcm_def_freq | tr -d ' ' | atohx > /tmp/bcm_def_freq
+	DECTANTDIV=`db get hw.board.DectAntennaDiversity`
+	case "$DECTANTDIV" in
+		1|off) echo -ne "\x01" > /tmp/dect_antenna_diversity ;;
+		2) echo -ne "\x02" > /tmp/dect_antenna_diversity ;;
+		*) echo -ne "\x00" > /tmp/dect_antenna_diversity ;;
+	esac
+
+	if [ ! -f /etc/dect/nvs ]; then
+		cp /etc/dect/nvs_default /etc/dect/nvs
+		dd of=/etc/dect/nvs if=/tmp/rfpi conv=notrunc bs=1 seek=0
+		dd of=/etc/dect/nvs if=/tmp/fixed_emc conv=notrunc bs=1 seek=10
+		dd of=/etc/dect/nvs if=/tmp/bcm_def_freq conv=notrunc bs=1 seek=6
+		dd of=/etc/dect/nvs if=/tmp/dect_antenna_diversity conv=notrunc bs=1 seek=32
+		fsync /etc/dect/nvs
+	fi
+	
+	# init dectproxy
+	dectproxy > /dev/null 2>&1 &
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+stop_service() {
+        killall -9 dectproxy
+	killall -9 dectmngr
+}
+
+restart_service() {
+	echo "restarting dect"
+	killall dectmngr
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+reload_service() {
+	# reload config
+	dect -c
+}
+
+service_triggers() {
+        procd_add_reload_trigger dect
+}
+

dectmngr/files/sbin/dectreg

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# This script is likely not used. Just exit with
+# an error and see if someone screems... If not,
+# we can delete this file.
+exit 1
+
+
+[ -f /var/dectisregistering ] || {
+	touch /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -r
+	ubus call led.dect  set '{"state" : "notice"}'
+	sleep 20
+	rm /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -s
+	ubus call led.dect  set '{"state" : "ok"}'
+}

dectmngr2/Makefile

@@ -0,0 +1,53 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.1.0
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=ee63f0c087840adba9d944ae31d71a3ef9d64043
+PKG_NAME:=dectmngr2
+
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr2
+  CATEGORY:=Utilities
+  TITLE:=Dectmngr2
+  URL:=
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
+endef
+
+define Package/dectmngr2/description
+	Dectmngr2
+endef
+
+
+define Package/dectmngr2/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DIR) $(1)/etc/init.d/
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
+	$(CP) ./files/dect.config $(1)/etc/config/dect
+endef
+
+$(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

endptcfg-open/Makefile

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=endptcfg-open
-PKG_VERSION:=15-06-24
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://ihgsp.inteno.se/ihgsp/consumer/
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/image.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-
-define Package/endptcfg-open
-  CATEGORY:=Utilities
-  TITLE:=Broadcom endpoint driver configuration application pre compiled for open SDK
-  URL:=
-endef
-
-define Package/endptcfg-open/description
-        Broadcom endpoint driver configuration application pre compiled for open SDK
-endef
-
-
-
-define Package/endptcfg-open/install
-mkdir -p $(1)/usr/bin/
-ifeq ($(CONFIG_BCM_CHIP_ID),"63138")
-         $(CP)  $(PKG_BUILD_DIR)/endptcfg_arm $(1)/usr/bin/endptcfg	
-	
-else
-	$(CP)  $(PKG_BUILD_DIR)/endptcfg_mips $(1)/usr/bin/endptcfg
-endif	 	
-
-endef
-
-$(eval $(call BuildPackage,endptcfg-open))

endptcfg/Config.in

@@ -0,0 +1,4 @@
+
+config ENDPT_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

endptcfg/Makefile

@@ -0,0 +1,92 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptcfg
+PKG_VERSION:=0.2
+
+PKG_SOURCE_VERSION:=1194b05278bd0945ca5c76436e56617b86871a65
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=endptcfg-open
+else
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=git@private.inteno.se:endptcfg
+PKG_SOURCE_PROTO:=git
+endif
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+LDFLAGS+= \
+		-Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+BCMKERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+export BCMKERNEL_DIR
+
+TARGET_LDFLAGS += $(BCMKERNEL_DIR)/userspace/private/apps/vodsl/telephonyProfiles/telephonyProfiles.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/voip/util/log/vodslLog.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/endpoint/endpoint_user.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/bos/bos.o \
+			-lpthread
+
+TARGET_CFLAGS += -DFAKE_SSP
+
+RSTRIP:=true
+export BUILD_DIR
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptcfg
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint driver configuration application
+  URL:=
+  DEPENDS:=+libpthread bcmkernel
+endef
+
+define Package/endptcfg/description
+	Broadcom endpoint driver configuration application
+endef
+
+define Package/endptcfg/config
+	source "$(SOURCE)/Config.in"
+endef
+
+ifneq ($(CONFIG_ENDPT_OPEN),y)
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		$(TARGET_CONFIGURE_OPTS) LINUX_DIR=$(LINUX_DIR) LDFLAGS="$(TARGET_LDFLAGS)" CFLAGS="$(TARGET_CFLAGS) \
+			-I$(LINUX_DIR)/include \
+			-I$(STAGING_DIR)/usr/include \
+			-DRS_ENDIAN_TYPE=RS_BIG_ENDIAN \
+			-DBOS_OS_LINUXUSER -DBOS_CFG_TIME \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/broadcom/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/endpt/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/codec \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/publicInc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/casCtl/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_drivers/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/private/apps/vodsl/voip/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/LinuxUser"
+endef
+else
+define Build/Compile
+endef
+endif
+
+define Package/endptcfg/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	cp $(PKG_BUILD_DIR)/endptcfg $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,endptcfg))

gigaset-elements/.gitignore

@@ -0,0 +1,3 @@
+
+git-src
+

gigaset-elements/Makefile

@@ -0,0 +1,65 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=gigaset-elements
+
+PKG_VERSION:=2.4.2
+# PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
+PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
+
+PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=$(PKG_GIGASET_ELEMENTS_VERSION)
+
+
+PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+######################################################
+
+define Package/gigaset-elements
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libjson-c +libcurl
+  TITLE:=Gigaset elements
+endef
+
+######################################################
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) all
+endef
+
+
+
+define Package/gigaset-elements/install
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
+endef
+
+
+
+define Package/gigaset-elements/preinst
+#!/bin/sh
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
+endef
+
+
+define Package/gigaset-elements/postrm
+#!/bin/sh
+rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
+rm -rf /usr/share/gigaset
+endef
+
+
+######################################################
+
+$(eval $(call BuildPackage,gigaset-elements))
+

ice-client/Config.in

@@ -0,0 +1,4 @@
+
+config ICE_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

ice-client/Makefile

@@ -15,19 +15,28 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=3.4.0
-PKG_RELEASE:=RC6
+BASE_PKG_VERSION:=3.4.1
+PKG_RELEASE:=RC11
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_URL:=ssh://git@iopsys.inteno.se/ice-client.git
-PKG_SOURCE_VERSION:=e860a7697ac8d6029cd1f75e1df9885e1d4131f5
+PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
+PKG_SOURCE_VERSION:=184d29446fe6103f567c968bf35569625326a82c
+ifeq ($(CONFIG_ICE_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+#PKG_NAME:=ice-client-open
+else
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=git@private.inteno.se:ice-client.git
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz
-PKG_SOURCE_PROTO:=git
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
+endif
 
 
 ###########################--RELEASE--################################
@@ -44,7 +53,11 @@ define Package/ice-client
 $(call Package/ice-client/Default)
 	TITLE:=ice-client
 	MENU:=1
-	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread +libjson-c
+	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
+endef
+
+define Package/ice-client/config
+	source "$(SOURCE)/Config.in"
 endef
 
 ###########################--DEVELOPMENT--################################
@@ -52,7 +65,7 @@ endef
 # Uncomment stuff  Build/Prepare
 #
 # Plus make sure to comment and provide the following lines above
-# #PKG_SOURCE_URL:=ssh://git@iopsys.inteno.se/ice-client.git
+# #PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
 # #PKG_SOURCE_VERSION:=a11bf64e6b1054803b52750aabd71bf440ff6e16
 # #PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
 # #PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz
@@ -84,6 +97,10 @@ endef
 # command to copy the binary file from its current location (in our case the build
 # directory) to the install directory.
 
+ifeq ($(CONFIG_ICE_OPEN),y)
+define Build/Compile
+endef
+else
 define Build/Configure
 	echo $(BASE_PKG_VERSION)-$(PKG_RELEASE) > $(PKG_BUILD_DIR)/core/version.txt
 	echo $(DATE) > $(PKG_BUILD_DIR)/core/date.txt
@@ -94,21 +111,37 @@ endef
 define Build/Clean
 	$(MAKE) -C $(PKG_BUILD_DIR) clean
 endef
+endif
 
 define Package/ice-client/preinst
 #!/bin/sh
 echo "backup current config"
-cp /etc/iopsys/server.ini /tmp/iopsysserver.ini
-cp /etc/config/ice /tmp/ice.back
+if [ -f "/etc/iopsys/server.ini" ]; then
+	cp /etc/iopsys/server.ini /tmp/iopsysserver.ini
+fi
+if [ -f "/etc/config/ice" ]; then
+	cp /etc/config/ice /tmp/ice.back
+fi
 exit 0
 endef
 
+ifeq ($(CONFIG_ICE_OPEN),y)
+define Package/ice-client/install
+	$(INSTALL_DIR) $(1)/bin
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/usr
+	$(CP) $(PKG_BUILD_DIR)/bin/* $(1)/bin/
+	$(CP) $(PKG_BUILD_DIR)/etc/* $(1)/etc/
+	$(CP) $(PKG_BUILD_DIR)/usr/* $(1)/usr/
+endef
+else
 define Package/ice-client/install
 	$(INSTALL_DIR) $(1)/bin
 	$(CP) $(PKG_BUILD_DIR)/core/ice $(1)/bin
 	$(CP) $(PKG_BUILD_DIR)/modules/system/ubusevent/obj/iopsys/ubusevent $(1)/bin
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1} $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1,texecService.so.1.0.1} $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/lib/wsice/obj/iopsys/libwsice.so $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/execute
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/progress
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/result
@@ -124,6 +157,7 @@ define Package/ice-client/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(CP) $(PKG_BUILD_DIR)/scripts/ice-client $(1)/etc/init.d/ice-client
 endef
+endif
 
 define Package/ice-client/postinst
 #!/bin/sh
@@ -132,14 +166,14 @@ cp /tmp/iopsysserver.ini /etc/iopsys/server.ini
 rm -f /tmp/iopsysserver.ini 
 cp /tmp/ice.back /etc/config/ice 
 rm -f /tmp/ice.back
-if [ -f "/etc/rc.d/S99ice-client" ]; then
-	/etc/init.d/ice-client start
+if [ -f "/etc/rc.d/S98ice-client" ]; then
+	/etc/init.d/ice-client restart
 fi
 exit 0
 endef
 
 # Additional modules
-
+ifneq ($(CONFIG_ICE_OPEN),y)
 # Camerawatch
 define Package/ice-client-camerawatch
 $(call Package/ice-client/Default)
@@ -452,7 +486,7 @@ endef
 define Package/ice-client-fileme
   $(call Package/ice-client/Default)
   TITLE:=FileMe
-  DEPENDS+= +lighttpd +samba2-client
+  DEPENDS+= +lighttpd +lighttpd-mod-webdav +lighttpd-mod-setenv +lighttpd-mod-userdir +samba2-client +samba2-common +libpcre +libltdl +libxml2
 endef
 
 define Package/ice-client-fileme/description
@@ -853,11 +887,89 @@ fi
 exit 0
 endef
 
+# texec
+define Package/ice-client-texec
+  $(call Package/ice-client/Default)
+  TITLE:=texec
+  DEPENDS+= 
+endef
+
+define Package/ice-client-texec/description
+remote script execution module for ice-client
+endef
+
+define Package/ice-client-texec/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=texec" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-texec/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=tExecMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-texec/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/texecService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-texec/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=texecService.so.1.0.1" package="ice-client-texec" > /tmp/cfin
+fi
+exit 0
+endef
+
+# bmspeedtest
+define Package/ice-client-bcmspeedmgr
+  $(call Package/ice-client/Default)
+  TITLE:=bcmspeedmgr
+  DEPENDS+= 
+endef
+
+define Package/ice-client-bcmspeedmgr/description
+bcmspeedmgr module for ice-client
+endef
+
+define Package/ice-client-bcmspeedmgr/install
+	$(INSTALL_DIR) $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/bcmspeedmgr $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/speedsvc $(1)/bin
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(CP) $(PKG_BUILD_DIR)/platforms/iopsys/bcmspeedtestservice $(1)/etc/init.d/bcmspeedtestservice
+endef
+
+define Package/ice-client-bcmspeedmgr/postinst
+#!/bin/sh
+/etc/init.d/bcmspeedtestservice stop
+/etc/init.d/bcmspeedtestservice start
+exit 0
+endef
+
+endif
+
 # This line executes the necessary commands to compile our program.
 # The above define directives specify all the information needed, but this
 # line calls BuildPackage which in turn actually uses this information to
 # build a package.
 $(eval $(call BuildPackage,ice-client))
+ifneq ($(CONFIG_ICE_OPEN),y)
 $(eval $(call BuildPackage,ice-client-guest))
 $(eval $(call BuildPackage,ice-client-camerawatch))
 $(eval $(call BuildPackage,ice-client-openvpn))
@@ -872,3 +984,6 @@ $(eval $(call BuildPackage,ice-client-rework))
 $(eval $(call BuildPackage,ice-client-sip))
 $(eval $(call BuildPackage,ice-client-monitor))
 $(eval $(call BuildPackage,ice-client-gigaset))
+$(eval $(call BuildPackage,ice-client-texec))
+$(eval $(call BuildPackage,ice-client-bcmspeedmgr))
+endif

icgroupd/Makefile

@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2016 Inteno Broadband AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=icgroupd
+PKG_VERSION:=1.0
+PKG_RELEASE:=0
+
+PKG_LICENSE:=GPL-2.0
+PKG_LICENSE_FILES:=
+
+PKG_MAINTAINER:=Inteno Broadband AB
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/icgroupd
+  SECTION:=base
+  CATEGORY:=Base system
+  TITLE:=Inteno cgroup daemon
+  DEPENDS:=+uci +busybox
+endef
+
+define Package/icgroupd/description
+	This package contains Intenos cgroup daemon and associated
+	configuration and startup scripts.
+endef
+
+define Build/Compile
+	true
+endef
+
+define Package/icgroupd/install
+	$(INSTALL_DIR) $(1)/sbin $(1)/etc/init.d $(1)/etc/config
+
+	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
+	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
+	$(INSTALL_BIN) ./files/cgroupd $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,icgroupd))
+

icgroupd/files/cgroupd

@@ -0,0 +1,76 @@
+#!/bin/sh
+
+CGBASEDIR=$1
+CGCONFIG=$2
+[ -n "$CGBASEDIR" -a -n "$CGCONFIG" ] || exit 1
+
+[ -r /lib/functions.sh ] || exit 1
+. /lib/functions.sh
+
+CGPROCMAP=/tmp/cgprocmap
+CGPERIOD=3s
+
+DBGLOG=/tmp/cgroupd.log
+DEBUG=0
+
+
+add_to_procmap () {
+	local name_grp=$1
+	local name grp
+
+	name=$(echo $name_grp |awk -F= '{print $1}')
+	grp=$(echo $name_grp |awk -F= '{print $2}')
+
+	echo "($name) $grp" >> $CGPROCMAP
+}
+
+# Read configuration file and create process:group look-up table
+# in /tmp file
+read_config () {
+	local enab
+
+	config_load $CGCONFIG
+
+	config_get enab cgroups enabled "1"
+	[ $enab -eq 0 ] && exit 1
+
+	config_get CGDEFGROUP cgroups defgroup "_undef_"
+	[ "$CGDEFGROUP" == "_undef_" ] && exit 1
+	[ "$DEBUG" == "1" ] && echo "default $CGDEFGROUP" >> $DBGLOG
+
+	echo -n '' > $CGPROCMAP
+	config_list_foreach procmap procmap add_to_procmap
+	[ "$DEBUG" == "1" ] && cat $CGPROCMAP >> $DBGLOG
+}
+
+# Move all process except init from cgroup root to cgroups according
+# to /tmp look-up table
+move_wild_procs () {
+	local wild_procs=$(cat $CGBASEDIR/cgroup.procs)
+	local pid name grp
+
+	for pid in $wild_procs; do
+
+		[ $pid -eq 1 ] && continue
+		if [ -d /proc/$pid ]; then
+
+			name=$(awk '{print $2}' /proc/$pid/stat)
+			grp=$(awk "\$1==\"$name\" {print \$2}" $CGPROCMAP)
+
+			[ "$grp" == "." ] && continue
+			[ -n "$grp" ] || grp=$CGDEFGROUP
+
+			[ "$DEBUG" == "1" ] && \
+			    echo "Moving proc $pid $name to $grp" >> $DBGLOG
+			echo $pid > $CGBASEDIR/$grp/cgroup.procs
+		fi
+	done
+}
+
+
+[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
+read_config
+while true; do
+	move_wild_procs
+	sleep $CGPERIOD
+done

icgroupd/files/cgroups.config

@@ -0,0 +1,48 @@
+config cgroups cgroups
+	option enabled 1
+	option defgroup iopsys/normal
+
+config cgroup _root_
+#	list option cpu.rt_runtime_us=50000
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=40000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_normal
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=10000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_high
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=30000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=10000
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_normal
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=2500
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_high
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=7500
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config procmap procmap
+	list procmap kthreadd=.
+	list procmap minidlna=3prt/normal
+

icgroupd/files/cgroups.init

@@ -0,0 +1,93 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+USE_PROCD=1
+PROCD_DEBUG=1
+NAME=cgroupd
+
+CGBASEDIR=/sys/fs/cgroup
+CGCONFIG="cgroups"
+
+DBGLOG=/tmp/cginit.log
+DEBUG=0
+
+
+cgroupinit_set_knob_value () {
+	local knob_val=$1
+	local dir=$2
+	local knob val
+
+	knob=$(echo $knob_val |awk -F= '{print $1}')
+	val=$(echo $knob_val |awk -F= '{print $2}')
+	/bin/echo $val > $CGBASEDIR/$dir/$knob
+	[ "$DEBUG" == "1" ] && \
+	    echo "/bin/echo $val > $CGBASEDIR/$dir/$knob (ret=$?)" >> $DBGLOG
+}
+
+cgroupinit_create_group () {
+	local cgrp=$1
+	local dir
+
+	[ "$DEBUG" == "1" ] && echo "Create group $cgrp:" >> $DBGLOG
+	if [ "$cgrp" == "_root_" ]; then
+		dir=.
+	else
+		dir=$(echo $cgrp |tr '_' '/')
+
+		if [ ! -d $CGBASEDIR/$dir ]; then
+			mkdir $CGBASEDIR/$dir
+			[ "$DEBUG" == "1" ] && \
+			    echo "mkdir $CGBASEDIR/$dir (ret=$?)" >> $DBGLOG
+		fi
+	fi
+
+	config_list_foreach $cgrp option cgroupinit_set_knob_value $dir
+}
+
+cgroupinit_configure_cgroups () {
+	local enab defgrp
+
+	[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
+	config_load $CGCONFIG
+
+	config_get enab cgroups enabled "1"
+	[ $enab -eq 0 ] && return 1
+
+	config_get defgrp cgroups defgroup "_undef_"
+	[ "$defgrp" == "_undef_" ] && return 1
+
+	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
+		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
+		[ $? -eq 0 ] || return 1
+	fi
+
+	config_foreach cgroupinit_create_group cgroup
+	return 0
+}
+
+start_service () {
+	cgroupinit_configure_cgroups
+	[ $? -eq 0 ] || return
+
+	procd_open_instance
+	procd_set_param command /sbin/cgroupd $CGBASEDIR $CGCONFIG
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service () {
+	local cgdir procs prc
+
+	for cgdir in $(find $CGBASEDIR -type d -mindepth 1 -depth); do
+		procs=$(cat $cgdir/cgroup.procs)
+		for prc in $procs; do
+			echo $prc > $CGBASEDIR/cgroup.procs
+		done
+		rmdir $cgdir
+	done
+}
+
+service_triggers() {
+        procd_add_reload_trigger $CGCONFIG
+}
+

icwmp/Config.in

@@ -15,10 +15,31 @@ config CWMP_ACS_HDM
 	bool "HDM"
 endchoice
 
+choice
+	prompt "Select Data Model"
+	default tr098
+
+config DATAMODEL_TR098
+	bool "TR-098"
+
+config DATAMODEL_TR181
+	bool "TR-181"
+endchoice
+
 config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y
 
+choice
+	prompt "enable xmpp feature"
+	default disable
+
+config XMPP_DISABLE
+	bool "disable"
+
+config XMPP_ENABLE
+	bool "enable"
+endchoice
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n

icwmp/Makefile

@@ -8,15 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2015-11-10
+PKG_VERSION:=3.0-2016-07-07
 PKG_FIXUP:=autoreconf
-ifeq ($(CONFIG_BCM_OPEN),y)
-PKG_SOURCE_URL:=http://ihgsp.inteno.se/git/freecwmp.git
-else
-PKG_SOURCE_URL:=ssh://git@iopsys.inteno.se/freecwmp.git
-endif
+PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=8d34c241548a21b6462df5d16906824685fe916c
+PKG_SOURCE_VERSION:=6fac1df3418d727388162d5e006c7a756c9ff8d2
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -38,7 +34,7 @@ define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libexpat +curl
 endef
 
 define Package/icwmp/description
@@ -72,7 +68,7 @@ endif
 
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
-	
+
 ifneq ($(CWMP_REVISION)_,_)
 ifneq ($(CWMP_REVISION),exported)
 ifneq ($(CWMP_REVISION),Unversioned directory)
@@ -90,6 +86,9 @@ CONFIGURE_ARGS += \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
 
+CONFIGURE_ARGS += $(if $(CONFIG_DATAMODEL_TR181),--enable-datamodel=tr181,--enable-datamodel=tr098)
+CONFIGURE_ARGS += $(if $(CONFIG_XMPP_ENABLE),--enable-xmpp=enable,--enable-xmpp=disable)
+
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \
@@ -140,7 +139,6 @@ ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/iwepkeygen $(1)/usr/sbin/iwepkeygen
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/watchicwmpd.sh $(1)/usr/sbin/watchicwmpd
 endif
 endef
 

inotify-tools/Makefile

@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=inotify-tools
+PKG_VERSION:=3.14
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=1df9af4d6cd0f4af4b1b19254bcf056aed4ae395
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/rvoicilas/inotify-tools.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/inotify-tools
+	CATEGORY:=Utilities
+	TITLE:=Tools to trace filesystem events.
+	URL:=
+endef
+
+define Package/inotify-tools/description
+	Tools to trace filesystem events.
+endef
+
+define Package/inotify-tools/install
+	$(INSTALL_DIR) $(1)/usr
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(CP) ./files/* $(1)/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0.4.1 $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0 $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywait $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywatch $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,inotify-tools))

inotify-tools/files/usr/bin/iop_write_monitor

@@ -0,0 +1,13 @@
+#! /bin/sh
+
+# is the real root mounted ?
+if [ ! -f /tmp/inotify_real_root/etc/preinit ]
+then
+	ubivol=$( cat /proc/cmdline  | sed -e "s/.*root=\(ubi:rootfs_.\).*/\1/" )
+	mkdir /tmp/inotify_real_root
+	mount -t ubifs $ubivol /tmp/inotify_real_root
+fi
+
+inotifywait -r -m -e modify -e create -e attrib -e delete -e move /tmp/inotify_real_root
+
+

inteno-configs/Makefile

@@ -1,52 +0,0 @@
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=inteno-configs
-
-PKG_VERSION:=1.0
-PKG_SOURCE_URL:=git@iopsys.inteno.se:inteno-configs.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e6836dbc3dde40eba661b3c37d5f5d0cc6f2e5d0
-
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-######################################
-
-define NewConfig 
-  define Package/$(1)/install
-	$(INSTALL_DIR) $$(1)/etc/config
-	$(INSTALL_DIR) $$(1)/etc/uci-defaults
-	$(CP) $(PKG_BUILD_DIR)/$(1)/etc/config/* $$(1)/etc/config/ | true
-	$(CP) $(PKG_BUILD_DIR)/$(1)/etc/uci-defaults/* $$(1)/etc/uci-defaults | true
-  endef
-
-  define Package/$(1)
-	SECTION:=configs
-	CATEGORY:=Configurations
-	TITLE:=$(1)
-  endef
-
-endef
-
-
-define AddConfig
-  $(eval $(call NewConfig,$(1)))
-  $(eval $(call BuildPackage,$(1)))
-endef
-
-######################################
-
-$(eval $(call AddConfig,conf-common-inteno))
-$(eval $(call AddConfig,conf-caiman-inteno))
-
-

iop/Makefile

@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=iop
+PKG_VERSION:=1.0
+PKG_RELEASE:=0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/iop
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=iop utilities
+endef
+
+define Package/iop/description
+	This package contains Intenos Iop utilities
+endef
+
+define Build/Compile
+	true
+endef
+
+define Package/iop/install
+	true
+endef
+
+$(eval $(call BuildPackage,iop))

iop/configs/config

@@ -0,0 +1,194 @@
+CONFIG_BUILD_NLS=y
+CONFIG_BUSYBOX_CUSTOM=y
+CONFIG_CCACHE=y
+CONFIG_DEBUG=y
+CONFIG_DEVEL=y
+CONFIG_LOCALMIRROR="http://mirror.inteno.se/mirror"
+CONFIG_PACKAGE_4g-support=y
+CONFIG_PACKAGE_6in4=y
+CONFIG_PACKAGE_6rd=y
+CONFIG_PACKAGE_6to4=y
+CONFIG_PACKAGE_6tunnel=y
+CONFIG_PACKAGE_alsa-lib=y
+CONFIG_PACKAGE_bind-host=y
+CONFIG_PACKAGE_chat=y
+CONFIG_PACKAGE_comgt=y
+CONFIG_PACKAGE_crashlog=y
+CONFIG_PACKAGE_ddns-scripts=y
+CONFIG_PACKAGE_ds-lite=y
+CONFIG_PACKAGE_gdb=m
+CONFIG_PACKAGE_gdbserver=m
+CONFIG_PACKAGE_getopt=y
+CONFIG_PACKAGE_glib2=y
+CONFIG_PACKAGE_ice-client=y
+CONFIG_PACKAGE_ice-client-camerawatch=m
+CONFIG_PACKAGE_ice-client-fileme=m
+CONFIG_PACKAGE_ice-client-gigaset=m
+CONFIG_PACKAGE_ice-client-guest=m
+CONFIG_PACKAGE_ice-client-iperf=m
+CONFIG_PACKAGE_ice-client-logreader=m
+CONFIG_PACKAGE_ice-client-monitor=m
+CONFIG_PACKAGE_ice-client-netrounds=m
+CONFIG_PACKAGE_ice-client-rshell=m
+CONFIG_PACKAGE_ice-client-texec=m
+# CONFIG_PACKAGE_icgroupd is not set
+CONFIG_PACKAGE_icwmp-curl=y
+CONFIG_PACKAGE_iperf-mt=y
+CONFIG_PACKAGE_ipset=y
+CONFIG_PACKAGE_iup=y
+CONFIG_PACKAGE_iwatchdog=y
+CONFIG_PACKAGE_juci=y
+CONFIG_PACKAGE_juci-broadcom-dsl=y
+CONFIG_PACKAGE_juci-broadcom-ethernet=y
+CONFIG_PACKAGE_juci-broadcom-iptv=y
+CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
+CONFIG_PACKAGE_juci-broadcom-vlan=y
+CONFIG_PACKAGE_juci-broadcom-wl=y
+CONFIG_PACKAGE_juci-broadcom-xdsl=y
+CONFIG_PACKAGE_juci-ddns=y
+CONFIG_PACKAGE_juci-diagnostics=y
+CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
+CONFIG_PACKAGE_juci-dropbear=y
+CONFIG_PACKAGE_juci-ethernet=y
+CONFIG_PACKAGE_juci-event=y
+CONFIG_PACKAGE_juci-firewall-fw3=y
+CONFIG_PACKAGE_juci-icwmp=y
+CONFIG_PACKAGE_juci-igmpinfo=y
+CONFIG_PACKAGE_juci-inteno-backup=y
+CONFIG_PACKAGE_juci-inteno-multiwan=y
+CONFIG_PACKAGE_juci-inteno-provisioning=y
+CONFIG_PACKAGE_juci-inteno-router=y
+CONFIG_PACKAGE_juci-inteno-qos=y
+CONFIG_PACKAGE_juci-inteno-voice-client=y
+CONFIG_PACKAGE_juci-macdb=y
+CONFIG_PACKAGE_juci-minidlna=y
+CONFIG_PACKAGE_juci-mod-status=y
+CONFIG_PACKAGE_juci-mod-system=y
+CONFIG_PACKAGE_juci-natalie-dect=y
+CONFIG_PACKAGE_juci-netmode=y
+CONFIG_PACKAGE_juci-network-netifd=y
+CONFIG_PACKAGE_juci-printer=y
+CONFIG_PACKAGE_juci-samba=y
+CONFIG_PACKAGE_juci-simple-gui=y
+CONFIG_PACKAGE_juci-snmpd=y
+CONFIG_PACKAGE_juci-sysupgrade=y
+CONFIG_PACKAGE_juci-theme-inteno=y
+CONFIG_PACKAGE_juci-ubus-core=y
+CONFIG_PACKAGE_juci-upnp=y
+CONFIG_PACKAGE_juci-usb=y
+CONFIG_PACKAGE_juci-utils=y
+# CONFIG_PACKAGE_kmod-ipt-nathelper is not set
+CONFIG_PACKAGE_kmod-nls-base=y
+CONFIG_PACKAGE_kmod-siit=y
+CONFIG_PACKAGE_layer2interface=y
+CONFIG_PACKAGE_ldd=y
+# CONFIG_PACKAGE_libcgroup=y
+# CONFIG_PACKAGE_libcgroup-daemon=y
+CONFIG_PACKAGE_libdaemon=y
+CONFIG_PACKAGE_libffmpeg-mini=y
+CONFIG_PACKAGE_libgmp=y
+CONFIG_PACKAGE_libreadline=y
+CONFIG_PACKAGE_minidlna=y
+CONFIG_PACKAGE_miniupnpd=y
+CONFIG_PACKAGE_mtd-utils=y
+CONFIG_PACKAGE_mtd-utils-deubinize=y
+CONFIG_PACKAGE_mtd-utils-imagewrite=y
+CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
+CONFIG_PACKAGE_mtd-utils-nanddump=y
+CONFIG_PACKAGE_mtd-utils-ubiattach=y
+CONFIG_PACKAGE_mtd-utils-ubidetach=y
+CONFIG_PACKAGE_mtd-utils-ubimkvol=y
+CONFIG_PACKAGE_mtd-utils-ubinfo=y
+CONFIG_PACKAGE_mtd-utils-ubirmvol=y
+CONFIG_PACKAGE_mtd-utils-ubirsvol=y
+CONFIG_PACKAGE_mtd-utils-ubiupdatevol=y
+CONFIG_PACKAGE_multiwan=y
+CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_netcheck=y
+CONFIG_PACKAGE_ntfs-3g=y
+CONFIG_PACKAGE_odhcp6c=y
+CONFIG_PACKAGE_odhcpd=y
+CONFIG_PACKAGE_openssl-util=y
+CONFIG_PACKAGE_openvpn-easy-rsa=y
+CONFIG_PACKAGE_openvpn-openssl=y
+CONFIG_PACKAGE_p910nd=y
+CONFIG_PACKAGE_peripheral_manager=y
+CONFIG_PACKAGE_port-management=y
+CONFIG_PACKAGE_power-management=y
+CONFIG_PACKAGE_ppp-mod-pppoa=y
+CONFIG_PACKAGE_ppp-mod-pppol2tp=y
+CONFIG_PACKAGE_ppp-multilink=y
+CONFIG_PACKAGE_qos-scripts=y
+CONFIG_PACKAGE_qrencode=y
+CONFIG_PACKAGE_questd=y
+CONFIG_PACKAGE_rdisc6=y
+CONFIG_PACKAGE_rdnssd=y
+CONFIG_PACKAGE_resolveip=y
+CONFIG_PACKAGE_rpcd=y
+CONFIG_PACKAGE_samba3=y
+CONFIG_PACKAGE_samba3-nmbd=y
+CONFIG_PACKAGE_snmpd=y
+CONFIG_PACKAGE_strace=y
+CONFIG_PACKAGE_tc=y
+CONFIG_PACKAGE_tcpdump=y
+CONFIG_PACKAGE_terminfo=y
+CONFIG_PACKAGE_tptest=y
+CONFIG_PACKAGE_traceroute6=y
+CONFIG_PACKAGE_usb-modeswitch=y
+CONFIG_PACKAGE_usbreset=y
+CONFIG_PACKAGE_xl2tpd=y
+CONFIG_PACKAGE_zoneinfo-core=y
+CONFIG_PACKAGE_zoneinfo-europe=y
+CONFIG_TARGET_CUSTOMER="INT"
+CONFIG_TARGET_ROOTFS_JFFS2=y
+CONFIG_TARGET_ROOTFS_TARGZ=y
+# CONFIG_USE_SSTRIP is not set
+CONFIG_USE_STRIP=y
+CONFIG_BUILD_LOG=y
+CONFIG_BUSYBOX_CONFIG_ADDUSER=y
+CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_BUSYBOX_CONFIG_DELUSER=y
+# CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
+CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
+CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
+CONFIG_BUSYBOX_CONFIG_HTTPD=y
+CONFIG_BUSYBOX_CONFIG_INSMOD=y
+CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
+CONFIG_BUSYBOX_CONFIG_LOGIN=y
+CONFIG_BUSYBOX_CONFIG_LSMOD=y
+CONFIG_BUSYBOX_CONFIG_LSPCI=y
+CONFIG_BUSYBOX_CONFIG_LSUSB=y
+CONFIG_BUSYBOX_CONFIG_MICROCOM=y
+CONFIG_BUSYBOX_CONFIG_RMMOD=y
+CONFIG_BUSYBOX_CONFIG_STTY=y
+CONFIG_BUSYBOX_CONFIG_TASKSET=y
+CONFIG_BUSYBOX_CONFIG_TFTP=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
+CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CGI=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
+CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
+CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY is not set
+# CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
+CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
+# CONFIG_BUSYBOX_CONFIG_LOGIN_SCRIPTS is not set
+# CONFIG_BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD is not set
+# CONFIG_BUSYBOX_CONFIG_PAM is not set
+# CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
+CONFIG_LIBCURL_CRYPTO_AUTH=y
+CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
+# CONFIG_SAMBA3_CONFIG_NO_PRINTING is not set

iop/configs/luci.diff

@@ -0,0 +1,38 @@
+CONFIG_PACKAGE_luci=y
+CONFIG_PACKAGE_luci-mod-admin-core=y
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-app-ddns=y
+CONFIG_PACKAGE_luci-app-dslstats=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-iup=y
+CONFIG_PACKAGE_luci-app-mcpd=y
+CONFIG_PACKAGE_luci-app-minidlna=y
+CONFIG_PACKAGE_luci-app-multiwan=y
+CONFIG_PACKAGE_luci-app-p910nd=y
+CONFIG_PACKAGE_luci-app-parental-control=y
+CONFIG_PACKAGE_luci-app-port-management=y
+CONFIG_PACKAGE_luci-app-power-mgmt=y
+CONFIG_PACKAGE_luci-app-samba=y
+CONFIG_PACKAGE_luci-app-sfp=y
+CONFIG_PACKAGE_luci-app-snmp=y
+CONFIG_PACKAGE_luci-app-speedtest=y
+CONFIG_PACKAGE_luci-app-upnp=y
+CONFIG_PACKAGE_luci-app-voice=y
+CONFIG_PACKAGE_luci-theme-base=y
+CONFIG_PACKAGE_luci-theme-bootstrap=y
+CONFIG_PACKAGE_luci-i18n-english=y
+CONFIG_PACKAGE_luci-proto-3g=y
+CONFIG_PACKAGE_luci-proto-4g=y
+CONFIG_PACKAGE_luci-proto-core=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-sgi-cgi=y
+CONFIG_PACKAGE_luci-lib-core=y
+CONFIG_PACKAGE_luci-lib-core_source=y
+CONFIG_PACKAGE_luci-lib-ipkg=y
+CONFIG_PACKAGE_luci-lib-json=y
+CONFIG_PACKAGE_luci-lib-nixio=y
+CONFIG_PACKAGE_luci-lib-nixio_notls=y
+CONFIG_PACKAGE_luci-lib-sys=y
+CONFIG_PACKAGE_luci-lib-web=y
+

iop/scripts/cfe_upgrade.sh

@@ -0,0 +1,42 @@
+# this is a developer helper script to install firmware on a remote host running in CFE mode
+
+function usage {
+	echo "usage: $0 cfe_upgrade <host> <file>"
+}
+
+function cfe_upgrade {
+	if [ -z "$1" ] ; then
+		usage
+		echo "Error: host required"
+		exit 1
+	fi
+	if [ -z "$2" ] ; then
+		usage
+		echo "Error: firmware filename required"
+		exit 1
+	fi
+	if [ ! -e $2 ] ; then
+		usage
+		echo "Error: firmware file does not exist"
+		exit 1
+	fi
+	IMAGE=`basename $2`
+	echo "CFE upgrade host: $1 with file $IMAGE"
+	[ "$2" ] && [ -e "$2" ] &&  curl -i -F filedata=@$2  http://$1/upload.cgi && echo "upgrade done!"
+}
+
+register_command "cfe_upgrade" "<host> <file>  Install firmware on remote host in CFE mode"
+
+function cfe_upgrade_latest {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 cfe_upgrade_latest <host>"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*.w | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop cfe_upgrade $1 $IMAGE
+	}
+}
+
+register_command "cfe_upgrade_latest" "<host>  Install latest firmware on remote host in CFE mode"

iop/scripts/feeds_update.sh

@@ -0,0 +1,63 @@
+#! /bin/bash
+
+function feeds_update {
+
+    developer=0
+
+    git remote -v | grep -q http || developer=1
+
+    #while getopts "d" opt; do
+    #    case $opt in
+    #        d)
+    #	    developer=1
+    #            ;;
+    #        \?)
+    #            echo "Invalid option: -$OPTARG" >&2
+    #            exit 1
+    #            ;;
+    #    esac
+    #done
+
+    cp .config .genconfig_config_bak
+
+    rm -rf package/feeds
+
+    #if -d argument is passed, clone feeds with ssh instead of http
+    if [ $developer == 1 ]; then
+	./scripts/feeds update -g
+    else
+	./scripts/feeds update
+    fi
+
+
+    ./scripts/feeds install -f -p feed_inteno_openwrt -a
+    ./scripts/feeds install -f -p feed_inteno_juci -a
+    ./scripts/feeds install -f -p feed_inteno_packages -a
+    ./scripts/feeds install -f -p feed_inteno_broadcom -a
+    ./scripts/feeds install -f -p feed_inteno_targets iopsys-brcm63xx-mips
+    ./scripts/feeds install -f -p feed_inteno_targets iopsys-brcm63xx-arm
+    ./scripts/feeds install -a 
+    ./scripts/feeds uninstall asterisk18
+    ./scripts/feeds uninstall zstream
+    ./scripts/feeds uninstall mtd-utils
+    ./scripts/feeds install -f -p feed_inteno_packages mtd-utils
+    ./scripts/feeds uninstall qrencode
+    ./scripts/feeds install -f -p feed_inteno_packages qrencode
+
+    rm -rf package/feeds/oldpackages/libzstream # have to run this for now since uninstall is not working every time
+
+    cp .genconfig_config_bak .config
+    make defconfig
+
+    # record when we last run this script
+    touch tmp/.iop_bootstrap 
+
+    # always return true
+    exit 0
+}
+
+register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
+
+
+
+

iop/scripts/genconfig.sh

@@ -0,0 +1,262 @@
+#!/bin/bash
+
+function genconfig {
+    export CLEAN=0
+    export IMPORT=0
+    export SRCTREEOVERR=0
+    export FILEDIR="files/"
+    export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"  
+    export CUSTCONF="customerconfigs"
+    export VERBOSE=0
+    export DEVELOPER=0
+    export TMPDIR="/tmp/builder/"
+    LOCAL_MIRROR="http://mirror.inteno.se/mirror"
+
+    iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
+    iopsys_brcm63xx_arm="dg400"
+    target="bogus"
+
+    set_target() {
+
+	local profile=$1
+
+	for p in $iopsys_brcm63xx_mips; do
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_mips"
+            fi
+	done
+
+	for p in $iopsys_brcm63xx_arm; do
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_arm"
+            fi
+	done
+    }
+
+
+    git remote -v | grep -q http || {
+	DEVELOPER=1
+
+	bcmAllowed=0
+	iceAllowed=0
+	endptAllowed=0
+	natalieAllowed=0
+
+	allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -w 'R\|W' | awk '{print$NF}')"
+	for repo in $allowedRepos; do
+	    case $repo in
+		bcmkernel) bcmAllowed=1 ;;
+		ice-client) iceAllowed=1 ;;
+		endptcfg) endptAllowed=1 ;;
+		natalie-dect*) natalieAllowed=1 ;;
+	    esac
+	done
+    }
+
+    v() {
+	[ "$VERBOSE" -ge 1 ] && echo "$@"
+    }
+
+    usage() {
+        echo
+        echo 1>&2 "Usage: $0 [OPTIONS] BoardConfig Customerconfig"
+        echo
+	echo "  -c,  remove all files under ./files and import from config "
+	echo "  -v,  verbose"
+	echo "  -u, Update customer config before applying"  
+	echo "	-p, set profile (if exists)"
+	echo "	-t, use latest git tag and number of commits since as version for the build"
+	echo "  -s, enable 'Package source tree override'"
+	echo 
+        echo "BoardConfig ex "
+	ls -1 configs
+	if [ -d "$CUSTCONF/$1" ]; then
+            echo "Customerconfig ex"
+	    ls  $CUSTCONF/*
+	fi  
+	echo
+	echo "Example ./genconfig vg50 TELIA" 
+        echo "(if no customerconfig is chosen the Inteno Config will be used)"
+	echo 	
+        exit 127
+    }
+
+    use_local_mirror()
+    {
+	if wget -T 3 -t 2 -O /dev/null $LOCAL_MIRROR >/dev/null 2>/dev/null
+	then
+	    echo "mirror [$LOCAL_MIRROR] exists. Using local mirror"
+	    sed -i "s;CONFIG_LOCALMIRROR=.*;CONFIG_LOCALMIRROR=\"$LOCAL_MIRROR\";" .config
+	else
+	    echo "mirror [$LOCAL_MIRROR] does not exist. Not using local mirror"
+	fi
+    }
+
+    generate_config()
+    {
+	DIFFFILE="$1"
+	MASTERFILE="$2"
+	while read p; do
+	    v  "$p"
+	    sed -r -i "$p" $MASTERFILE
+	done < $DIFFFILE
+    }
+
+    setup_dirs()
+    {
+	if [ $DEVELOPER -eq 1 ]; then
+	    if [ ! -d "$CUSTCONF" ]; then
+		git  clone  git@private.inteno.se:customerconfigs
+	    elif [ $IMPORT -eq 1 ]; then
+		cd customerconfigs
+		v "git pull"
+		git pull
+		cd ..
+	    fi
+	fi
+
+
+	if [ ! -d "$FILEDIR" ]; then
+	    mkdir $FILEDIR
+	elif  [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
+	    v "rm -rf $FILEDIR*"	
+	    rm -rf $FILEDIR*
+	fi
+    }
+
+
+    create_and_copy_files()
+    {
+	local BOARDTYPE=$1
+	local CUSTOMER=$2
+
+	# Validate seleced board and customer
+	set_target $BOARDTYPE
+	if [ $target == "bogus" ]; then
+	    echo "Hardware profile does not exist"
+	    exit 1
+	elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/" ]; then
+	    echo "Customer profile does not exist"
+	    exit 1
+	fi
+
+	# Clean base-file package to force rebuild when changing profile
+	make package/base-files/clean
+
+	# Base config on master
+	v  "Config $BOARDTYPE selected"
+	v "cp  $CONFIGPATH/config  .config"
+	cp  $CONFIGPATH/config  .config
+
+	# Apply profile diff to master config if selected
+	if [ -n "$PROFILE" ]; then 
+	    if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
+		cat $CONFIGPATH/$PROFILE.diff >> .config
+	    elif [ "$PROFILE" == "juci" ]; then
+		v "Default profile (juci) is selected."
+	    else
+		echo "ERROR: profile $PROFILE does not exist!"
+		exit 1
+	    fi
+	else 
+	    v "No profile selected! Using default."
+	fi
+	
+	# Set target and profile
+	echo "CONFIG_TARGET_${target}=y" >> .config
+	echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
+
+	# Add customerconfig diff if a customer is selected
+	if [ -n "$CUSTOMER" ]; then
+	    echo "$BOARDTYPE $CUSTOMER" > .current_config_file
+	    if [ -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/fs" ]; then
+		v "cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR"
+		cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR
+	    fi
+	    if [ -e "$CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff" ]; then
+		v "Apply $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff"
+		cat $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff >> .config
+	    fi
+	fi
+
+	# Set target version
+	local GIT_TAG=$(git describe --abbrev=0 --tags)
+	echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
+
+
+	# Enable Pckage source tree override if selected
+	[ $SRCTREEOVERR -eq 1 ] && \
+            echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
+
+
+	# developer mode selected ?
+	if [ $DEVELOPER -eq 1 ]; then
+	    # rewrite url to clone with ssh instead of http
+	    echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
+	    [ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
+	    [ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
+	    [ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    [ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
+	else
+	    echo "CONFIG_BCM_OPEN=y" >> .config
+	    echo "CONFIG_ICE_OPEN=y" >> .config
+	    echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    echo "CONFIG_NATALIE_OPEN=y" >> .config
+	fi
+
+	# Set default values based on selected parameters
+	make defconfig
+
+	# Temporary fixup for juci/luci profile
+	if [ "$PROFILE" == "luci" ]; then
+	    sed -i '/CONFIG_DEFAULT_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
+	fi
+
+	echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+    }
+
+    ####### main #####
+    if [ ! -e tmp/.iop_bootstrap ]; then
+	echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
+	echo "Run: iop feeds_update"
+	exit 0
+    fi
+
+    if [ $# -eq 0 ]; then
+	echo Current profile:
+	cat .current_config_file
+	echo "Try ./iop_get_config.sh -h' to get instructions if you want to change current config"
+	exit 0
+    else
+	
+	while [ -n "$1" ]; do 
+	    case "$1" in
+
+		-c) export CLEAN=1;;
+		-u) export IMPORT=1;;
+		-v) export VERBOSE="$(($VERBOSE + 1))";;
+		-p) export PROFILE="$2"; shift;; 
+		-t) export USE_TAG=1;; 
+		-s) export SRCTREEOVERR=1;;
+		-h) usage;;
+		-*)
+		    echo "Invalid option: $1 "
+		    echo "Try  -h' for more information."
+		    exit 1
+		    ;;
+		*) break;;
+	    esac
+	    shift;
+	done
+	[ -d $TMPDIR ] || mkdir $TMPDIR
+	setup_dirs
+	create_and_copy_files "$1" "$2"
+	[ -d $TMPDIR ] && rm -rf $TMPDIR
+	use_local_mirror
+    fi
+}
+
+
+register_command "genconfig" "Generate configuration for board and customer"

iop/scripts/generate_tarballs.sh

@@ -0,0 +1,88 @@
+#!/bin/sh
+
+
+
+build_bcmkernel_consumer() {
+	local tarfile bcmkernelcommith
+	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/feed_inteno_broadcom/bcmkernel/$sdkversion.mk | cut -d'=' -f2)
+	# do not build bcmopen sdk if it was already built before
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/bcmopen-$profile-$bcmkernelcommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/bcmkernel-3.4-$sdkversion/bcm963xx/release
+	sh do_consumer_release -p $profile -y
+	tarfile='out/bcm963xx_*_consumer.tar.gz'
+	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
+	scp $tarfile inteno@ihgsp.inteno.se:/home/inteno/public/www/iopsys/consumer/bcmopen-$profile-$bcmkernelcommith.tar.gz
+	rm -f $tarfile
+	cd $curdir
+}
+
+build_natalie_consumer() {
+	# create natalie-dect open version tar file
+	local natalieversion nataliecommith
+	grep -q "CONFIG_TARGET_NO_DECT=y" .config && return
+	natalieversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
+	nataliecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/natalie-dect-$natalieversion/
+	mkdir natalie-dect-open-$natalieversion
+	cp NatalieFpCvm6362/Src/Projects/NatalieV3/FpCvm/Linux6362/dects.ko natalie-dect-open-$natalieversion/dect.ko
+	tar -czv  natalie-dect-open-$natalieversion/ -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
+	scp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
+	cp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $curdir/
+	rm -rf natalie-dect-open-$natalieversion
+	rm -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
+	cd $curdir
+}
+
+build_endptcfg_consumer() {
+	# create endptcfg open version tar file
+	local endptversion endptcommith
+	grep -q "CONFIG_TARGET_NO_VOICE=y" .config && return
+	endptversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/endptcfg/Makefile | cut -d'=' -f2)
+	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/endptcfg/Makefile | cut -d'=' -f2)
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/endptcfg-$profile-$endptversion-$endptcommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/endptcfg-$endptversion/
+	mkdir endptcfg-open-$endptversion
+	cp endptcfg endptcfg-open-$endptversion/
+	tar -czv  endptcfg-open-$endptversion/ -f endptcfg-$profile-$endptversion-$endptcommith.tar.gz
+	scp endptcfg-$profile-$endptversion-$endptcommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
+	cp endptcfg-$profile-$endptversion-$endptcommith.tar.gz $curdir/
+	rm -rf endptcfg-open-$endptversion
+	rm -f endptcfg-$profile-$endptversion-$endptcommith.tar.gz
+	cd $curdir
+}
+
+build_ice_consumer() {
+	# create ice-client open version tar file
+	local iceversion icebasever icerelease icecommith
+	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | head -1 | cut -d'=' -f2)
+	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
+	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
+	iceversion=$icebasever$icerelease
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/ice-client-$profile-$iceversion-$icecommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/ice-client-$icebasever/ipkg-*
+	tar -czv  ice-client -f ice-client-$profile-$iceversion-$icecommith.tar.gz
+	scp ice-client-$profile-$iceversion-$icecommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
+	cp ice-client-$profile-$iceversion-$icecommith.tar.gz $curdir/
+	rm -f ice-client-$profile-$iceversion-$icecommith.tar.gz
+	cd $curdir
+}
+
+
+function generate_tarballs {
+
+    git remote -v | grep -q http && return # do not continue if this is an open SDK environment
+
+    profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
+    sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
+    curdir=$(pwd)
+
+    build_bcmkernel_consumer
+    build_natalie_consumer
+    build_endptcfg_consumer
+    build_ice_consumer
+
+}
+
+register_command "generate_tarballs" "Generate tarballs for openstk"
+

iop/scripts/install_key.sh

@@ -0,0 +1,18 @@
+# this is a developer helper script to install the public ssh key in the created image
+
+function install_key {
+
+    mkdir -p files/etc/dropbear
+    test -e ~/.ssh/id_dsa.pub && cat ~/.ssh/id_dsa.pub >>files/etc/dropbear/authorized_keys
+    test -e ~/.ssh/id_rsa.pub && cat ~/.ssh/id_rsa.pub >>files/etc/dropbear/authorized_keys
+    chmod 0644 files/etc/dropbear/authorized_keys
+
+    echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
+    echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
+    echo "tty/0::askfirst:/bin/ash --login" >>files/etc/inittab
+    echo "ttyS0::askfirst:/bin/ash --login" >>files/etc/inittab
+
+    echo Done
+}
+
+register_command "install_key" "Install the user's public ssh key in the created image"

iop/scripts/scp_changes.sh

@@ -0,0 +1,70 @@
+# this is a developer helper script to SCP changed files to remote host
+
+ROOT=build_dir/target-mips_uClibc-0.9.33.2/root-iopsys-brcm63xx-mips/
+ROOT_OLD=tmp/root_old/
+ROOT_TMP=tmp/root_tmp/
+
+function scp_changes_reset {
+	{ cd `dirname $0`
+		rm -rf "$ROOT_OLD"
+		mkdir -p "$ROOT_OLD"
+		cp -a "$ROOT"* "$ROOT_OLD"
+	}
+}
+
+function scp_changes {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 scp_changes <host/-r(eset)/-p(retend)>"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		if [ ! -d $ROOT ]; then
+			echo "$ROOT does not exist"
+			echo "please build the project first"
+			exit 1;
+		fi
+		if [ "$1" = "-r" ]; then
+			echo "reset changes"
+			scp_changes_reset
+			exit 0
+		fi
+		if [ ! -d $ROOT_OLD ]; then
+			echo "$ROOT_OLD does not exist"
+			echo "you didn't store state of previous buildroot"
+			#echo "please run ./scp_changes_reset.sh"
+			echo "doing it now"
+			scp_changes_reset
+			exit 1;
+		fi
+		FILES=`diff -rq "$ROOT" "$ROOT_OLD" 2>&1 | sed -ne "s?^Files .* and $ROOT_OLD\\(.*\\) differ?\\1?p" -ne "s?^Only in $ROOT\\(.*\\): \\(.*\\)?\\1/\\2?p"`
+		if [ "$1" = "-p" ]; then
+			echo "files that would be copied:"
+			echo $FILES
+			exit 0
+		fi
+		for f in $FILES
+		do
+			mkdir -p "$ROOT_TMP`dirname $f`"
+			cp -af "$ROOT$f" "$ROOT_TMP$f"
+		done
+		if [ -d "$ROOT_TMP" ]; then
+			echo "scp changed files to $1"
+			pushd "$ROOT_TMP" 2>&1 >/dev/null
+			scp -r * root@$1:/
+			RETVAL=$?
+			popd 2>&1 >/dev/null
+			rm -rf "$ROOT_TMP"
+			if [ "$RETVAL" -eq 0 ]; then
+				scp_changes_reset
+			else
+				echo "scp error"
+				exit $RETVAL
+			fi
+		else
+			echo "no change"
+		fi
+	}
+}
+
+register_command "scp_changes" "<host/-r(eset)/-p(retend)>  SCP only changed files to device"

iop/scripts/setup_host.sh

@@ -0,0 +1,177 @@
+#!/bin/bash
+
+function setup_host {
+
+    if [ "$(whoami)" != "root" ]; then
+	echo "Please run this script as root!"
+	exit 1
+    fi
+
+    packages_all="bison flex g++ g++-multilib zlib1g-dev gettext gawk svn-buildpackage libncurses5-dev ncurses-term git automake gtk-doc-tools liblzo2-dev uuid-dev execstack"
+    packages_perl="libconvert-binary-c-perl libdigest-crc-perl"
+    packages_x64="libc6-dev-i386 lib32z1"
+    packages_npm="npm nodejs yui-compressor"
+
+    curdir=$(pwd)
+
+    #===============#
+    # Prerequisites #
+    #===============#
+
+    mysh=$(ls -hl /bin/sh | awk -F'[ ,/]' '{print$NF}')
+    if [ "$mysh" != "bash" ]; then
+	echo "On Debian based systems, e.g. Ubuntu, /bin/sh must point to bash instead of $mysh"
+	read -p "Do you approve this change (y/n): " ans
+	if [ "$ans" == "y" ]; then
+	    rm -f /bin/sh
+	    ln -s bash /bin/sh
+	else
+	    echo "Warning! You haven't pointed /bin/sh to bash."
+	    cd $curdir
+	    exit 1
+	fi
+    fi
+
+    echo "The packages below must be installed"
+    echo $packages_all $packages_perl
+    read -p "Do you approve insallation of these packages (y/n): " ans
+    if [ "$ans" == "y" ]; then
+	apt-get install $packages_all
+	apt-get install $packages_perl
+    else
+	cd $curdir
+	exit 1
+    fi
+
+    if [ "$(uname -m | awk '{print$1}')" == "x86_64" ]; then
+	echo "You are running a Linux Distribution based on 64-bit kernel"
+	echo "The packages below must be installed"
+	echo $packages_x64
+	read -p "Do you approve insallation of these packages (y/n): " ans
+	if [ "$ans" == "y" ]; then
+	    apt-get install $packages_x64
+	else
+	    cd $curdir
+	    exit 1
+	fi
+    fi
+
+    echo "The packages below must be installed in order to be able to compile JUCI"
+    echo $packages_npm
+    read -p "Do you approve insallation of these packages (y/n): " ans
+    if [ "$ans" == "y" ]; then
+	apt-get install npm nodejs yui-compressor
+	npm install -g npm
+	npm install -g grunt-cli
+	npm install -g mocha
+	npm install -g bower
+	npm install -g uglify-js
+	npm install -g less
+
+	if [ "$(which node)" == "" ]; then
+	    NODEJS=$(which nodejs)
+	    if [ "$NODEJS" != "" ]; then
+		read -p "Found nodejs executable at $(which nodejs), but no path to 'node'. Do you want to create a symlink? (y/n): " ans
+		if [ "$ans" == "y" ]; then
+		    ln -s "$NODEJS" "/usr/bin/node"
+		fi
+	    fi
+	fi
+
+	user=$(who | head -1 | awk '{print$1}')
+	[ -n $user ] && chown -R $user:$user /home/$user/.npm/
+    else
+	cd $curdir
+	exit 1
+    fi
+
+    # Get the Broadcom toolchain from here and unpack the mips/arm package to /opt:
+    echo -n "Checking for Broadcom MIPS toolchain: "
+    if [ -d /opt/toolchains/crosstools-mips-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21 ]; then
+	install_mips=0
+	echo "YES"
+    else
+	install_mips=1
+	echo "NO"
+    fi
+
+    echo -n "Checking for Broadcom ARM toolchain: "
+    if [ -d /opt/toolchains/crosstools-arm-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21-NPTL ]; then
+	install_arm=0
+	echo "YES"
+    else
+	install_arm=1
+	echo "NO"
+    fi
+
+    if [ $install_mips -eq 1 -o $install_arm -eq 1 ]; then
+	read -p "Do you approve insallation of missing toolchains (y/n): " ans
+	if [ "$ans" == "y" ]; then
+	    echo "Downloading toolchain"
+	else
+	    cd $curdir
+	    exit 1
+	fi
+
+	cd ~
+	wget http://iopsys.inteno.se/iopsys/toolchain/crosstools-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21.Rel1.2-full.tar.bz2
+	tar jxf crosstools-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21.Rel1.2-full.tar.bz2
+	cd /
+
+	if [ $install_mips -eq 1 ]; then
+	    echo "Installing MIPS toolchain"
+	    tar jxf ~/crosstools-mips-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21.Rel1.2.tar.bz2
+	fi
+
+	if [ $install_arm -eq 1 ]; then
+	    echo "Installing ARM toolchain"
+	    tar jxf ~/crosstools-arm-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21-NPTL.Rel1.2.tar.bz2
+	fi
+
+	rm -f ~/crosstools-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21-sources.tar.bz2
+	rm -f ~/crosstools-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21.Rel1.2-full.tar.bz2
+	rm -f ~/crosstools-mip*-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21.Rel1.2.tar.bz2
+	rm -f ~/crosstools-arm-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21-NPTL.Rel1.2.tar.bz2
+    fi
+
+    gcc_ver=$(ls -l /usr/bin/gcc-[0-9]* | head -1 | awk '{print$NF}' | cut -d'-' -f2)
+    if [ "$gcc_ver" != "4.8" ]; then
+	echo "Your current gcc version is $gcc_ver, but it must be changed to 4.8"
+	read -p "Do you approve this change (y/n): " ans
+	if [ "$ans" == "y" ]; then
+	    apt-get install gcc-4.8
+	    apt-get install g++-4.8
+	    apt-get install gcc-4.8-multilib
+
+	    update-alternatives --install /usr/bin/g++ c++ /usr/bin/g++-4.8 100
+	    update-alternatives --install /usr/bin/g++ c++ /usr/bin/g++-$gcc_ver 90
+
+	    update-alternatives --install /usr/bin/gcc cc /usr/bin/gcc-4.8 100
+	    update-alternatives --install /usr/bin/gcc cc /usr/bin/gcc-$gcc_ver 90
+
+	    update-alternatives --install /usr/bin/cpp cpp /usr/bin/cpp-4.8 100
+	    update-alternatives --install /usr/bin/cpp cpp /usr/bin/cpp-$gcc_ver 90
+
+	    update-alternatives --set c++ /usr/bin/g++-4.8
+	    update-alternatives --set cc  /usr/bin/gcc-4.8
+	    update-alternatives --set cpp /usr/bin/cpp-4.8
+	    ln -s /etc/alternatives/cc /usr/bin/cc 
+
+	    echo "The deafult gcc version has now been changed from $gcc_ver to 4.8"
+	else
+	    cd $curdir
+	    exit 1
+	fi
+    fi
+
+    echo ""
+    echo ""
+    echo "You have successfully installed and configred prerequisites to be able to build an iopsys firmware"
+    echo ""
+    echo ""
+
+    cd $curdir
+
+}
+
+register_command "setup_host" "Install needed packets to host machine"

iop/scripts/ssh_install_key.sh

@@ -0,0 +1,17 @@
+# this is a developer helper script to install the public ssh key on host running dropbear
+
+function ssh_install_key {
+	if [ -e ~/.ssh/id_rsa.pub ]; then
+		echo "Adding public RSA key to $1"
+		KEY=`cat ~/.ssh/id_rsa.pub`
+	elif [ -e ~/.ssh/id_dsa.pub ]; then
+		echo "Adding public DSA key to $1"
+		KEY=`cat ~/.ssh/id_dsa.pub`
+	else
+		echo "No public key found"
+		exit 1
+	fi
+	ssh root@$1 "echo '$KEY' >> /etc/dropbear/authorized_keys" && echo ok
+}
+
+register_command "ssh_install_key" "Install the users public ssh key on host running dropbear"

iop/scripts/ssh_sysupgrade.sh

@@ -0,0 +1,56 @@
+# this is a developer helper script to install firmware on a remote host with SSH
+
+function usage {
+	echo "usage: $0 ssh_sysupgrade <host> <file> [opts]"
+}
+
+function ssh_sysupgrade {
+	if [ -z "$1" ] ; then
+		usage
+		echo "Error: host required"
+		exit 1
+	fi
+	if [ -z "$2" ] ; then
+		usage
+		echo "Error: firmware filename required"
+		exit 1
+	fi
+	if [ ! -e $2 ] ; then
+		usage
+		echo "Error: firmware file does not exist"
+		exit 1
+	fi
+	IMAGE=`basename $2`
+	echo "sysupgrade host: $1 with file $IMAGE"
+	[ "$2" ] && [ -e "$2" ] && scp $2 root@$1:/tmp/ && ssh root@$1 "sysupgrade $3 /tmp/$IMAGE" && echo "sysupgrade done!"
+}
+
+register_command "ssh_sysupgrade" "<host> <file> [opts]  Install firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*.y | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest" "<host> [opts]  Install latest ubifs firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest_w {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest_w <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*.w | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest_w" "<host> [opts]  Install latest jffs2 firmware on remote host with SSH"

iop/scripts/status.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+
+function status {
+    topdir=$PWD
+    echo
+    for subdir in .git $(find feeds/ -type d -name .git); do
+
+	echo "======= $(dirname $subdir) ========"
+	cd $subdir/..
+	if git status |grep -Eq '^\s([^\s\(]+)'; then
+	    git status |grep -Ev '(nothing added|use "git |^$)'
+	else
+	    git status |grep -E "(On branch|HEAD detached)"
+	fi
+	cd $topdir
+    done
+    echo
+}
+
+register_command "status" "Display the state of your working tree"

iop/scripts/update_package.sh

@@ -0,0 +1,602 @@
+#!/bin/bash
+
+
+print_git_update()
+{
+    echo "pkg -> ${PKG_NAME}"
+    echo "	PKG_BUILD_DIR	=	${PKG_BUILD_DIR}"
+    echo "	PKG_DIR		=	${PKG_DIR}"
+    echo "	PKG_SOURCE	=	${PKG_SOURCE}"
+    echo "	PKG_NAME	=	${PKG_NAME}"
+    echo "	PKG_SOURCE_URL	=	${PKG_SOURCE_URL}"
+    echo "	PKG_SOURCE_PROTO=	${PKG_SOURCE_PROTO}"
+    echo "	PKG_SOURCE_VERSION=	${PKG_SOURCE_VERSION}"
+    echo "	PKG_SOURCE	=	${PKG_SOURCE}"
+    echo "	PKG_SOURCE_VERSION_FILE=${PKG_SOURCE_VERSION_FILE}"
+}
+
+is_git_same()
+{
+    git_last=$(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)
+    #echo "$PKG_NAME $git_last = ${PKG_SOURCE_VERSION}"
+    if [ "$git_last" == "${PKG_SOURCE_VERSION}" ]
+    then
+	return 0
+    fi
+    return 1
+}
+
+update_this_pkg()
+{
+    mk_hash=$(get_makefile_hash)
+
+    if [ "$mk_hash" != "${PKG_SOURCE_VERSION}" ]
+    then
+	echo "${PKG_NAME}:"
+	echo "	build dir     = ${PKG_BUILD_DIR}"
+	echo "	feed makefile = ${mk_hash}"
+	echo "	stale hash    = ${PKG_SOURCE_VERSION}"
+	echo "	build git     = $(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)"
+	echo "	Git hash in package makefile and the git hash recorded from last compile of"
+	echo "	package is different. You probably want to recompile the package"
+	echo "	to get an up to date version in ${PKG_BUILD_DIR}/.git_update"
+	echo ""
+
+	echo -n "	Shold we continue with the update anyway? [y/N]:"
+	read answer
+	echo ""
+
+	case $answer in
+	    y|Y)
+		;;
+	    n|N|*)
+		return 1;;
+	esac
+    fi
+
+    echo "${PKG_NAME}:"
+    echo "	build dir     = ${PKG_BUILD_DIR}"
+    echo "	pkg dir       = ${PKG_DIR}"
+    echo "	feed makefile = ${PKG_SOURCE_VERSION}"
+    echo "	build git     = $(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)"
+    echo "	package is at a different git commit in build compared to feed"
+    echo -n "	Should we update the feed and top project to reflect the new version ? [y/N]:"
+    read answer
+    echo ""
+
+    case $answer in
+	y|Y)
+	    return 0;;
+	*)
+	    echo ""
+	    return 1;;
+    esac
+}
+
+get_makefile_hash()
+{
+    if [ -n "$PKG_SOURCE_VERSION_FILE" ]
+    then
+	name="$PKG_SOURCE_VERSION_FILE"
+    else
+	name=Makefile
+    fi
+    grep "PKG_SOURCE_VERSION:=" ${PKG_DIR}/${name} | sed -e "s/\(^PKG_SOURCE_VERSION:=\)\(.*\)/\2/"
+}
+
+insert_hash_in_feed_makefile()
+{
+    if [ -n "$PKG_SOURCE_VERSION_FILE" ]
+    then
+	name="$PKG_SOURCE_VERSION_FILE"
+    else
+	name=Makefile
+    fi
+
+    git_last=$(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)
+
+    sed -i -e "s/\(^PKG_SOURCE_VERSION:=\).*/\1${git_last}/" ${PKG_DIR}/${name}
+    (cd ${PKG_DIR}; git add ${name})
+}
+
+
+# BUG: fix if only local branche name!
+branch_uptodate()
+{
+    # $1 git repo
+    # $2 if it exist dont abort do the pull
+    (cd $1
+     git remote update 2>&1 >/dev/null
+
+     LOCAL=$(git rev-parse @)
+     REMOTE=$(git rev-parse @{u})
+     BASE=$(git merge-base @ @{u})
+
+     if [ -z "$REMOTE" ]; then
+	 BRANCH=$(basename $(git symbolic-ref -q HEAD))
+	 echo "You need to setup a tracking branch for $BRANCH"
+	 exit 99
+     fi
+
+     if [ $LOCAL = $REMOTE ]; then
+	 return
+     elif [ $LOCAL = $BASE ]; then
+	 if [ -n "$2" ]
+	 then
+	     echo "Doing automatic pull on [ $1 ]"
+	     if git pull
+	     then
+		 return
+	     else
+		 echo "Something wrong with pull. aborting, repo at"
+		 echo "    [ $1 ]"
+		 exit 99
+	     fi
+	 else
+	     echo "Local repo behind remote:"
+	     echo "do git pull at repo"
+	     echo "    [ $1 ]"
+	     exit 99
+	 fi
+     elif [ $REMOTE = $BASE ]; then
+	 echo "Local repo ahead of remote. A push is needed"
+	 echo "Repo is at: $1"
+	 echo ""
+	 echo -n "Should we try a push ? [Y/n]:"
+	 read answer
+	 echo ""
+
+	 case $answer in
+	     n|N|q|Q)
+		 exit 99;;
+	     *)
+		 echo -e "${Yellow}"
+		 if ! git push origin HEAD
+		 then
+		     echo -e "${Color_Off}"
+		     exit 99
+		 fi
+		 echo -e "${Color_Off}Push done."
+		 ;;
+	 esac
+
+     else
+	 echo "Diverged. not sure what you did but there is no tracking branch. "
+	 echo "repo at [ $1 ]. fix it so that there is a tracking branch remote."
+	 echo "Often this is related to sombody having commited to the same branch"
+	 echo "on the server so a simple push wont work, try a 'git rebase'."
+	 exit 99
+     fi
+    )
+}
+
+on_a_branch()
+{
+    local repo=$1
+    local type=$2
+    (
+	cd $repo
+	name=$(git symbolic-ref -q HEAD)
+	if [ -z "$name" ]
+	then
+	    echo "git $type repo [ $repo ] is detached."
+
+	    branches=($(git branch -r --contains $(git rev-parse HEAD)))
+	    if [ 0 == ${#branches[@]} ]
+	    then
+		echo "It needs to be on a branch but git could not find any associated branch"
+		echo ""
+		echo "you need to make sure that the commit is not on a detached branch"
+		echo "and that the branch exist in the remote repo also. it can not be a local name"
+		echo "as it is about to get pushed so it can be part of system release"
+		exit 99
+	    fi
+
+	    echo "It needs to be on a branch. Please select one or quit if it is not in list."
+	    echo ""
+
+	    i=0
+	    for branch in ${branches[*]}
+	    do
+		echo "$i: $branch"
+		i=$((i + 1))
+	    done
+
+	    echo ""
+	    echo -n "Select what branch to checkout. Q/q or N/n to quit? "
+	    read answer
+
+	    case $answer in
+		q|Q|n|N)
+		    echo "Aborting!"
+		    exit 99;;
+	    esac
+
+	    echo -e "${Yellow}"
+	    pwd
+	    echo "git checkout ${branches[$answer]}"
+	    if ! git checkout -t ${branches[$answer]}
+	    then
+		local_branch=$(basename ${branches[$answer]})
+		if ! git checkout ${local_branch}
+		then
+		    echo -e "${Color_Off}"
+		    echo "update_git aborting! something was wrong changing to branch ${branches[$answer]}"
+		    echo "go to [ $repo ] and fix it."
+		    exit 99
+		fi
+	    fi
+	    echo -e "${Color_Off}"
+	fi
+    )
+}
+
+git_repos_uptodate()
+{
+    on_a_branch ${PKG_BUILD_DIR} package
+    on_a_branch ${PKG_DIR} feed
+    on_a_branch ${PWD} top
+    branch_uptodate ${PKG_BUILD_DIR}
+    branch_uptodate ${PKG_DIR} do_pull
+    branch_uptodate ${PWD} do_pull
+}
+
+get_feed_name()
+{
+
+    echo $1 |sed  -e "s|.*feeds/\([^/]*\).*|\1|"
+
+    # rest=$(dirname $1)
+    # base=$(basename $1)
+    # prev=$base
+
+    # while [ -n "$rest" ]
+    # do
+    # 	if [ "$base" == "feeds" ]
+    # 	then
+    # 	    echo "$prev"
+    # 	fi
+    # done
+}
+
+create_message()
+{
+    FORMAT="commit %H%n\
+Author: %aN <%aE>%n\
+Date: %ai%n\
+%n\
+%w(80,4,4)%s%n
+%b%n\
+%w()Base directory -> ${repo_PATH}/"
+    local FROM=${PKG_SOURCE_VERSION}
+    local TO=$(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)
+
+    local commits=$(cd ${PKG_BUILD_DIR};git rev-list ${FROM}..${TO})
+
+    local feed=$(get_feed_name ${PKG_DIR})
+
+    echo "Update feed [ $feed ] package [ $PKG_NAME ]"
+    echo ""
+    echo "-------------------------------------------------------------------------------"
+    (cd ${PKG_BUILD_DIR}; git log --graph --oneline ${FROM}..${TO})
+    echo "-------------------------------------------------------------------------------"
+
+    for commit in $commits
+    do
+	(cd ${PKG_BUILD_DIR}; git show --stat --pretty=format:"$FORMAT"  $commit)
+	echo "-------------------------------------------------------------------------------"
+    done
+}
+
+edit_file()
+{
+    echo -en "${Red}"
+    echo "Here is the commit message we are going to use!"
+    echo "-------------------------------------------------------------------------------"
+    echo -en "${Color_Off}"
+    cat $1
+    echo -en "${Red}"
+    echo "-------------------------------------------------------------------------------"
+    echo -en "${Color_Off}"
+
+    echo -n "Do you want to edit the message [y/N]? "
+    read answer
+
+    case $answer in
+	y|Y)
+	       $EDITOR $1;;
+    esac
+}
+
+
+commit_feed()
+{
+    template=$(readlink -f $1)
+    edit_file $template
+
+    echo -e "${Yellow}"
+    (
+	cd ${PKG_DIR}
+	if git commit -F $template
+	then
+	    if git push origin HEAD
+	    then
+		echo -e "${Color_Off} Feed Updated!"
+		return
+	    else
+		echo -e "${Color_Off}"
+		echo "something wrong push feed git ${PKG_DIR}"
+		exit 99
+	    fi
+	else
+	    echo -e "${Color_Off}"
+	    echo "something wrong committing to feed git ${PKG_DIR}"
+	    exit 99
+	fi
+    )
+}
+
+commit_feeds_config()
+{
+    template=$(readlink -f $1)
+    edit_file $template
+
+    echo -e "${Yellow}"
+    if git commit -F $template
+    then
+	if git push origin HEAD
+	then
+	    echo -e "${Color_Off}Feeds.conf updated!"
+	    return
+	else
+	    echo -e "${Color_Off}"
+	    echo "something wrong push change to feeds.conf"
+	    echo "try \"git remote update ; git stash ;git rebase; git push;git stash pop\""
+	    exit 99
+	fi
+    else
+	echo -e "${Color_Off}"
+	echo "something wrong committing to feed git"
+	exit 99
+    fi
+}
+
+insert_hash_in_feeds_config()
+{
+    local feed=$(get_feed_name ${PKG_DIR})
+    local TO=$(cd ${PKG_DIR}; git rev-parse HEAD)
+
+    sed -i feeds.conf -e "/${feed}/ s/\(.*\)[;^].*/\1^${TO}/"
+    git add feeds.conf
+}
+
+check_packages()
+{
+    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
+    echo "Now checking if any changes has been done to the packages."
+    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
+
+    # First scan all files in build dir for packages that have .git directories.
+    all_pkgs=$(find build_dir/ -name ".git")
+
+    for pkg in `echo "$all_pkgs"`
+    do
+	pkg=$(dirname $pkg)
+
+	# check if the git in build is at same commit id as the feed makefile points out
+	if [ -e ${pkg}/.git_update ]
+	then
+	    source ${pkg}/.git_update
+	fi
+
+#	print_git_update
+
+	if [ -n "${PKG_NAME}" ]
+	then
+	    if ! is_git_same
+	    then
+		if update_this_pkg
+		then
+		    #  print_git_update
+		    git_repos_uptodate
+		    insert_hash_in_feed_makefile
+		    create_message >tmp/msg
+		    commit_feed tmp/msg
+		    insert_hash_in_feeds_config
+		    commit_feeds_config tmp/msg
+		fi
+	    fi
+	fi
+    done
+}
+
+# now handle the target git. we have only one
+
+
+feeds_hash()
+{
+    grep -v "^#" feeds.conf | grep " $1" | sed -e "s/.*[;^]\(.*\)/\1/"
+}
+
+insert_feed_hash_in_feeds_config()
+{
+    local feed=$1
+    local TO=$(cd feeds/${feed}; git rev-parse HEAD)
+
+    sed -i feeds.conf -e "/ ${feed}/ s/\(.*\)[;^].*/\1^${TO}/"
+    git add feeds.conf
+}
+
+create_feed_message()
+{
+    local feed=$1
+    local FROM=$2
+    local TO=$3
+
+    local FORMAT="commit %H%n\
+Author: %aN <%aE>%n\
+Date: %ai%n\
+%n\
+%w(80,4,4)%s%n
+%b%n\
+%w()Base directory -> feeds/$feed/"
+
+
+    local commits=$(cd feeds/$feed;git rev-list ${FROM}..${TO})
+
+    echo "Update feed [ $feed ]"
+    echo ""
+    echo "-------------------------------------------------------------------------------"
+    (cd feeds/$feed; git log --graph --oneline ${FROM}..${TO})
+    echo "-------------------------------------------------------------------------------"
+
+    for commit in $commits
+    do
+	(cd feeds/$feed; git show --stat --pretty=format:"$FORMAT"  $commit)
+	echo "-------------------------------------------------------------------------------"
+    done
+}
+
+
+
+
+check_feeds()
+{
+    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
+    echo "Now checking if any changes has been done to the feeds."
+    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
+
+    feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
+    for feed in `echo $feeds`
+    do
+	feed_hash=$(feeds_hash $feed)
+	in_git=$(cd feeds/$feed; git rev-parse HEAD)
+
+	if [ "$feed_hash" != "$in_git" ]
+	then
+
+	    name=$(cd feeds/$feed;git symbolic-ref -q HEAD)
+	    if [ -z "$name" ]
+	    then
+		echo "Feed feeds/${feed} is at a git commit which is different from feeds.conf"
+		on_a_branch feeds/${feed} feed
+
+		#redo the test here and see if the feeds.conf and git is still different.
+		in_git=$(cd feeds/$feed; git rev-parse HEAD)
+		if [ "$feed_hash" = "$in_git" ]
+		then
+		    continue
+		fi
+	    fi
+
+	    LOCAL=$(cd feeds/$feed;git rev-parse @)
+	    REMOTE=$(cd feeds/$feed;git rev-parse @{u})
+	    BASE=$(cd feeds/$feed;git merge-base @ @{u})
+
+	    # if we are behind the remote automatically do a pull
+	    if [ $LOCAL = $BASE ]; then
+		(cd feeds/$feed ; git pull 1>/dev/null)
+
+		#redo the test here and see if the feeds.conf and git is still different.
+		in_git=$(cd feeds/$feed; git rev-parse HEAD)
+		if [ "$feed_hash" = "$in_git" ]
+		then
+		    continue
+		fi
+	    fi
+
+	    echo "Feed feeds/${feed} is at different commit than what is in feeds.conf"
+	    echo -n "Should we update feeds.conf to reflect the new version ? [y/N]:"
+	    read answer
+
+	    case $answer in
+		n|N)
+		    continue;;
+	    esac
+	    branch_uptodate feeds/${feed}
+	    create_feed_message ${feed} $feed_hash $in_git  >tmp/msg
+	    insert_feed_hash_in_feeds_config ${feed}
+	    commit_feeds_config tmp/msg
+	fi
+    done
+}
+
+feeds_at_top()
+{
+    git remote update 2>/dev/null 1>/dev/null
+    LOCAL=$(git rev-parse @)
+    REMOTE=$(git rev-parse @{u})
+
+    if [ $LOCAL = $REMOTE ]
+    then
+	return
+    fi
+
+    local_name=$(git rev-parse --abbrev-ref @ )
+    remote_name=$(git rev-parse --abbrev-ref @{u} )
+    
+    echo "Top repo local branch \"$local_name\" is not at same point as remote \"$remote_name\""
+    echo "This update script will update the feeds.conf file and for that to work it needs to"
+    echo "be up to date with the remote."
+    echo ""
+    echo "please run:"
+    echo "  git pull"
+    echo "  ./iop feeds_update"
+    echo ""
+    echo "do not forget the bootstrap. but do not run make it can delete your package in build"
+    exit 0
+}
+
+
+# Exported interface
+function update_package {
+
+    Color_Off='\033[0m'       # Text Reset
+
+    # Regular Colors
+    Black='\033[0;30m'        # Black
+    Red='\033[0;31m'          # Red
+    Green='\033[0;32m'        # Green
+    Yellow='\033[0;33m'       # Yellow
+    Blue='\033[0;34m'         # Blue
+    Purple='\033[0;35m'       # Purple
+    Cyan='\033[0;36m'         # Cyan
+    White='\033[0;37m'        # White
+
+    while getopts "v:h" opt; do
+	case $opt in
+	    v)
+		verbose=$OPTARG
+		;;
+	    h)
+		echo "some help! No options yet"
+		exit 1
+		;;
+	    \?)
+		echo "Invalid option: -$OPTARG" >&2
+		exit 1
+		;;
+	esac
+    done
+
+    if [ -z "$EDITOR" ]
+    then
+	if [ -f /usr/bin/vi ]; then
+	    EDITOR=vi
+	else
+	    echo "env variable EDITOR needs to be set"
+	    exit 1
+	fi
+    fi
+
+
+    # allow subshells to abort the whole program by exiting with "exit 99"
+    set -E
+    trap '[ "$?" -ne 99 ] || exit 99' ERR
+
+    feeds_at_top
+    check_packages
+    check_feeds
+}
+
+register_command "update_package" "Publish changes to packages and feeds"

iup/files/etc/init.d/iup

@@ -1,6 +1,7 @@
 #!/bin/sh /etc/rc.common
 # iup at boot
 # Copyright (C) 2007 OpenWrt.org
+
 START=98
 STOP=15
 USE_PROCD=1
@@ -12,6 +13,23 @@ include /lib/network
 CRONPATH="/etc/crontabs/root"
 RANGE=60
 
+management_interfaces() {
+	local DHCP_IFACES=""
+
+	is_notbridged_dhcp() {
+		local config="$1"
+		local proto="$(uci -q get network.$config.proto)"
+		local typ="$(uci -q get network.$config.type)"
+		if [ "$proto" == "dhcp" -a "$typ" != "bridge" ]; then
+			DHCP_IFACES="$DHCP_IFACES $config"
+		fi
+	}
+
+	config_load network
+	config_foreach is_notbridged_dhcp interface
+	echo $DHCP_IFACES
+}
+
 init_iup() {
 	local interval
 	local starttime
@@ -28,6 +46,42 @@ init_iup() {
 	config_load provisioning
 	config_get interval  polling  interval
 	config_get starttime  polling  starttime
+
+	### Ask for IUP related DHCP options only if IUP is enabled ###
+	new_reqopts() {
+		local net=$1
+		local enabled
+		local newreqopts=
+		local baseopts=
+		local reqopts="$(uci -q get network.$net.reqopts)"
+		local iupopts="66 67 128 224"
+		local ropt iopt
+		config_get enabled iup enabled "on"
+		for ropt in $reqopts; do
+			case $ropt in
+				66|67|128|224) ;;
+				*) baseopts="$baseopts $ropt" ;;
+			esac
+		done
+		ropt=""
+		reqopts="$baseopts $iupopts"
+		for ropt in $reqopts; do
+			case $ropt in
+				66|67|128|224) [ $enabled == "on" ] && newreqopts="$newreqopts $ropt" ;;
+				*) newreqopts="$newreqopts $ropt" ;;
+			esac
+		done
+
+		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		echo "$newreqopts"
+	}
+	for net in $(management_interfaces); do
+		uci -q set network.$net.reqopts="$(new_reqopts $net)"
+	done
+	uci commit network
+	ubus call network reload
+	#################################################################
+
 	if [ $interval == "weekly" ]; then
 		interval="0"
 	elif [ $interval == "hourly" ]; then
@@ -43,21 +97,35 @@ init_iup() {
 		if grep -q "iup" "$CRONPATH" ; then
 			sed -i "/iup/d" $CRONPATH
 		fi
-		echo "$number $starttime * * $interval     /sbin/iup > /dev/null 2>&1" >> $CRONPATH
+		echo "$number $starttime * * $interval     /sbin/iup -v > /dev/null 2>&1" >> $CRONPATH
+		fsync $CRONPATH
 		/etc/init.d/cron restart
 	fi
-}                 
+}
+
+boot() {
+	init_iup
+}
+
 start_service() {
 	init_iup
 
 	test_default_route
 	if [ "$?" -eq 0 ]; then
-		/sbin/iup &
+		/sbin/iup -v &
 	fi
 }
 
 stop_service() {
-	killall -9 /sbin/iup
+	if [ -f "/tmp/run/iup.pid" ]; then
+		kill -9 $(cat /tmp/run/iup.pid)
+		rm -rf /tmp/run/iup.pid
+	fi
+}
+
+reload_service() {
+	stop
+	start
 }
 
 service_triggers() {

iup/files/sbin/iup

@@ -1,5 +1,5 @@
 #!/bin/sh
-
+echo $$ > /var/run/iup.pid
 . /lib/functions.sh
 . /usr/share/libubox/jshn.sh
 
@@ -24,7 +24,7 @@ MAC=${MAC// /}
 MAC=$(echo $MAC | tr '[a-z]' '[A-Z]')
 
 v() {
-	[ "$VERBOSE" -ge 1 ] && echo "$@"
+	[ "$VERBOSE" -ge 1 ] && logger -t iup "$@"
 }
 
 if [ -f $IUPMD5 ]; then
@@ -91,6 +91,7 @@ reload ()
 
 handle_provisioning() {
 	local config="$1"
+	local default="$2"
 	local enabled
 	local url
 	local tftpfile
@@ -108,11 +109,16 @@ handle_provisioning() {
 		mkdir $IUPTEMP
 	fi
 	touch $IUPCONFFILES
-	config_get_bool enabled "$config" enabled
+	config_get_bool enabled "$config" enabled "$default"
 	config_get_bool defaultreset "$config" defaultreset
 	config_get deckey "$config" deckey
 	if [ "$enabled" -eq 1	]; then
-		config_get url "$config" urliup
+		if [ "$config" == "iup" ]; then
+			v "using url from dhcp options"
+			config_get url "$config" urliup
+		else 
+			config_get url "$config" url
+		fi
 		url=${url//\$MAC/$MAC}
 		v "Download from $url"
 		  
@@ -153,7 +159,15 @@ handle_Downloaded_file()
 	local KEY
 	[ -n "$1" ] && DECKEY=$(echo $1 | hexdump -e '16/1 "%02x"')
 	KEY=${DECKEY:-$DESKEY}
-	if [ "$(brcm_fw_tool -i check "$IUPCONFFILES")" == "UNKNOWN" ] ; then
+	local img_type
+	case "$(get_image_type "$IUPCONFFILES")" in                                  
+                "INTENO") img_type=2 ;;                                      
+                "CFE+FS") img_type=1 ;;                                         
+                "FS")     img_type=0 ;;                                      
+                *)      img_type="UNKNOWN";;                                
+        esac                                                                                     
+                                                                                                 
+        if [ "$img_type" == "UNKNOWN" ] ; then
 		case "$(hexdump -v -n 2 -e '1/1 "%02x"' $IUPCONFFILES)" in
 			1f8b)
 				v "Found Config"
@@ -242,15 +256,15 @@ config_get configurl configserver	url
 config_get reboot configserver reboot
 config_get iupurl iup	urliup
 if [ $configurl ]; then
-	handle_provisioning configserver
+	handle_provisioning configserver "0"
 elif [ $iupurl ]; then
-	handle_provisioning iup
+	handle_provisioning iup "1"
 else
-	echo "No Provisioning Server Found"
+	v "No Provisioning Server Found"
 	exit
 fi
 config_load provisioning
-config_foreach handle_provisioning subconfig
+config_foreach handle_provisioning subconfig "0"
 config_get software uppgradeserver url
 sofwareminuspath=${software##*/}
 v "Software version to download $sofwareminuspath"
@@ -259,9 +273,15 @@ if [ $software ]; then
 	local sysinfo=$(ubus call router quest "{ \"info\": \"system\" }")
 	json_load "$sysinfo"
 	json_get_var firmware firmware
+	json_get_var filesystem filesystem                                  
+        if [ "$filesystem" == "JFFS2" ] ; then                               
+                firmware=$firmware.w                                                                                                           
+        else                                                                 
+                firmware=$firmware.y                                         
+        fi     
 	if [ "$sofwareminuspath" == "${sofwareminuspath/$firmware/}" ] ; then
 		echo $software
-		handle_provisioning uppgradeserver
+		handle_provisioning uppgradeserver "0"
 	else
 		v "Will not update software, already up to date"
 	fi
@@ -275,3 +295,4 @@ if [ "$reboot" == "on" ]; then
 	v "Reboot Signaled"
 	/sbin/reboot
 fi
+rm -rf /var/run/iup.pid

iup/files/sbin/iup224

@@ -0,0 +1,72 @@
+#!/bin/sh
+
+. /usr/share/libubox/jshn.sh
+. /lib/network/config.sh
+
+if [ -z $1 ] ; then
+	echo "No argument"
+	exit 1
+fi 
+
+if [ $(echo $1|grep -o "," | wc -l) -eq 0 ] ; then
+	url=$1
+else
+	url=$(echo $1|cut -d',' -f1)
+	a=$(echo $1|cut -d',' -f2)
+	b=$(echo $1|cut -d',' -f3)
+	c=$(echo $1|cut -d',' -f4)
+fi
+
+echo "url" $url
+echo "a" $a
+echo "b" $b
+echo "c" $c
+
+currdate=$(date +"%Y-%m-%d")
+
+active=0
+if [ -z $a ] ; then
+	active=1
+elif [ $a ] && [ $b ] && [ $a -lt 25 ] ; then
+	#Time
+	begin=$(date +%s -d"$currdate $a")
+	now=$(date +%s)
+	end=$((begin+3600*$b))
+	if [ $now -gt $begin ] && [ $now -lt $end ] ; then
+		active=1
+	fi
+elif [ $a ] && [ $b ] && [ $c ] && [ $a -gt 25 ]  ; then
+	#Date
+	y=$(echo $a| cut -c1-4)
+	m=$(echo $a| cut -c5-6)
+	d=$(echo $a| cut -c7-8)
+	begin=$(date +%s -d"$y-$m-$d $b")
+	now=$(date +%s)
+	end=$((begin+3600*$c))
+	if [ $now -gt $begin ] && [ $now -lt $end ] ; then
+		active=1
+	fi
+else
+	echo "Bad format"
+	exit 1
+fi
+
+softwareminuspath=${url##*/}
+
+if [ $url ] && [ $active -eq 1 ]; then
+	echo "Software version to download $softwareminuspath"
+	local sysinfo=$(ubus call router quest "{ \"info\": \"system\" }")
+	json_load "$sysinfo"
+	json_get_var firmware firmware
+	local firmware_new=${softwareminuspath%.*}	# remove extension (.w, .y or .y2) from filename
+	if [ "$firmware_new" != "$firmware" ] ; then
+		echo "Image found $url will start flashing"
+		wait_for_dns $url
+		/sbin/sysupgrade -v $url &
+		exit 1
+	else
+		echo "Will not update software, already up to date"
+		exit 0
+	fi
+fi
+

layer2interface/broadcom/etc/init.d/layer2_interface

@@ -39,35 +39,40 @@ start_service() {
 	config_get AnnexM capabilities AnnexM
 
 	config_get a8a capabilities 8a
-
 	config_get b8b capabilities 8b
 	config_get c8c capabilities 8c
 	config_get d8d capabilities 8d
 	config_get a12a capabilities 12a
 	config_get b12b capabilities 12b
 	config_get a17a capabilities 17a
+
 	config_get US0 capabilities US0
 	config_get bitswap capabilities bitswap
 	config_get sra capabilities sra
-	GDmt=${GDmt/Enabled/d}
-	Glite=${Glite/Enabled/l}
-	T1413=${T1413/Enabled/t}
-	ADSL2=${ADSL2/Enabled/2}
-	AnnexL=${AnnexL/Enabled/e}
-	ADSL2plus=${ADSL2plus/Enabled/p}
-	AnnexM=${AnnexM/Enabled/m}
-	VDSL2=${VDSL2/Enabled/v}
 
-	a8a=${a8a/Enabled/8a}
-	b8b=${b8b/Enabled/8b}
-	c8c=${c8c/Enabled/8c}
-	c8c=${c8c/Enabled/8c}
+	GDmt=$(echo $GDmt | sed 's/Enabled\|1/d/g')
+	Glite=$(echo $Glite | sed 's/Enabled\|1/l/g')
+	T1413=$(echo $T1413 | sed 's/Enabled\|1/t/g')
+	ADSL2=$(echo $ADSL2 | sed 's/Enabled\|1/2/g')
+	AnnexL=$(echo $AnnexL | sed 's/Enabled\|1/e/g')
+	ADSL2plus=$(echo $ADSL2plus | sed 's/Enabled\|1/p/g')
+	AnnexM=$(echo $AnnexM | sed 's/Enabled\|1/m/g')
+	VDSL2=$(echo $VDSL2 | sed 's/Enabled\|1/v/g')
 
-	d8d=${d8d/Enabled/8d}
+	a8a=$(echo $a8a | sed 's/Enabled\|1/8a/g')
+	b8b=$(echo $b8b | sed 's/Enabled\|1/8b/g')
+	c8c=$(echo $c8c | sed 's/Enabled\|1/8c/g')
+	d8d=$(echo $d8d | sed 's/Enabled\|1/8d/g')
+	a12a=$(echo $a12a | sed 's/Enabled\|1/12a/g')
+	b12b=$(echo $b12b | sed 's/Enabled\|1/12b/g')
+	a17a=$(echo $a17a | sed 's/Enabled\|1/17a/g')
 
-	a12a=${a12a/Enabled/12a}
-	b12b=${b12b/Enabled/12b}
-	a17a=${a17a/Enabled/17a}
+	US0=$(echo $US0 | sed 's/1/on/g')
+	US0=$(echo $US0 | sed 's/0/off/g')
+	bitswap=$(echo $bitswap | sed 's/1/on/g')
+	bitswap=$(echo $bitswap | sed 's/0/off/g')
+	sra=$(echo $sra | sed 's/1/on/g')
+	sra=$(echo $sra | sed 's/0/off/g')
 
 	echo "Starting DSL"
 	

layer2interface/broadcom/etc/init.d/layer2_interface_adsl

@@ -99,8 +99,10 @@ atm_inf_conf() {
 
 		checkxtmlist $atmtype $pcr $scr $mbs
 		ret="$?"
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encaps 1 $ret $ret
-		xtmctl operate conn --addq 1.$vpi.$vci 0 wrr 1
+		xtmctl operate conn --add 1.$vpi.$vci aal5 $encaps 0 1 $ret
+		xtmctl operate conn --addq 1.$vpi.$vci 0 wrr 1 # low  priority queue
+		xtmctl operate conn --addq 1.$vpi.$vci 1 wrr 1 # mid  priority queue upstream ACK's and ping from LAN will use this queue
+		xtmctl operate conn --addq 1.$vpi.$vci 7 wrr 1 # high priority queue, internal traffic dhcp igmp dns and icmp
 		xtmctl operate conn --createnetdev 1.$vpi.$vci ${ifname%%.*}
 		xtmctl operate intf --state 1 enable
 		

layer2interface/broadcom/etc/init.d/layer2_interface_ethernet

@@ -75,7 +75,7 @@ boot() {
 				echo "ERROR: porttminit $interf failed!" > /dev/kmsg
 		done
 	fi
-
+	echo '1' > /proc/sys/net/ipv6/conf/$baseifname/disable_ipv6
 	ifconfig $baseifname up
 }
 

layer2interface/broadcom/etc/init.d/layer2_interface_vdsl

@@ -44,6 +44,7 @@ ptm_inf_conf() {
 	if [ "$ret" -eq 0 ]; then
 		xtmctl operate conn --add $dslat.$ptmprio 0 1
 		xtmctl operate conn --addq $dslat.$ptmprio 0 wrr 1 -1 -1 3000
+		xtmctl operate conn --addq $dslat.$ptmprio 7 wrr 1 -1 -1 3000 # fixes pppoe disconnect issue
 		xtmctl operate conn --createnetdev $dslat.$ptmprio ${ifname%%.*}
 		xtmctl operate intf --state 1 enable
 		xtmctl start

layer2interface/broadcom/etc/uci-defaults/20-layer2-config-generate

@@ -0,0 +1,114 @@
+#!/bin/sh
+
+local hasEthWan="1"
+local hasAdsl="$(db -q get hw.board.hasAdsl)"
+local hasVdsl="$(db -q get hw.board.hasVdsl)"
+
+local LANPORTS="$(db -q get hw.board.ethernetLanPorts)"
+local WANPORTS=""
+
+# populate layer2_interface_ethernet #
+if [ "$hasEthWan" == "1" ]; then
+	local wanEthernetPort="$(db -q get hw.board.ethernetWanPort)"
+	wanEthernetPort="${wanEthernetPort:-eth0}"
+	if [ ! -f /etc/config/layer2_interface_ethernet -o -z "$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_ethernet <<EOF
+config ethernet_interface 'Wan'
+	option name 'WAN'
+	option baseifname '${wanEthernetPort}'
+	option ifname '${wanEthernetPort}.1'
+EOF
+	fi
+	local ifname="$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)"
+	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
+elif [ "$hasEthWan" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_ethernet
+fi
+
+# populate layer2_interface #
+if [ "$hasAdsl" == "1" ]; then
+	if [ ! -f /etc/config/layer2_interface -o -z "$(uci -q get layer2_interface.capabilities)" ]; then
+		cat > /etc/config/layer2_interface <<EOF
+config dsltype 'vdsl'
+	option 'enabled' 'on'
+
+config dsltype 'adsl'
+	option 'enabled' 'on'
+
+config dslsettings 'capabilities'
+	option 'GDmt' 'Enabled'
+	option 'Glite' 'Enabled'
+	option 'T1413' 'Enabled'
+	option 'ADSL2' 'Enabled'
+	option 'AnnexL' 'Enabled'
+	option 'ADSL2plus' 'Enabled'
+	option 'VDSL2' 'Enabled'
+	option '8a' 'Enabled'
+	option '8b' 'Enabled'
+	option '8c' 'Enabled'
+	option '8d' 'Enabled'
+	option '12a' 'Enabled'
+	option '12b' 'Enabled'
+	option '17a' 'Enabled'
+	option '30a' 'Enabled'
+	option 'US0' 'on'
+	option 'bitswap' 'on'
+	option 'sra' 'on'
+EOF
+	fi
+elif [ "$hasAdsl" == "0" -a "$hasVdsl" == "0" ]; then
+	echo "" > /etc/config/layer2_interface
+fi
+
+# populate layer2_interface_adsl #
+if [ "$hasAdsl" == "1" ]; then
+	local wanAdslPort=$(db -q get hw.board.adslWanPort)
+	wanAdslPort="${wanAdslPort:-atm0}"
+	if [ ! -f /etc/config/layer2_interface_adsl -o -z "$(uci -q get layer2_interface_adsl.@atm_bridge[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_adsl <<EOF
+config atm_bridge
+	option 'link_type' 'EoA'
+	option 'encapseoa' 'llcsnap_eth'
+	option 'unit' '0'
+	option 'ifname' '${wanAdslPort}.1'
+	option 'baseifname' '${wanAdslPort}'
+	option 'vpi' '8'
+	option 'vci' '35'
+	option 'name' 'DSL8_35'
+	option 'atmtype' 'ubr'
+EOF
+	fi
+	local ifname="$(uci -q get layer2_interface_adsl.@atm_bridge[0].ifname)"
+	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
+elif [ "$hasAdsl" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_adsl
+fi
+
+# populate layer2_interface_vdsl #
+if [ "$hasVdsl" == "1" ]; then
+	local wanVdslPort=$(db -q get hw.board.vdslWanPort)
+	wanVdslPort="${wanVdslPort:-ptm0}"
+	if [ ! -f /etc/config/layer2_interface_vdsl -o -z "$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_vdsl <<EOF
+config vdsl_interface
+	option 'unit' '0'
+	option 'ifname' '${wanVdslPort}.1'
+	option 'baseifname' '${wanVdslPort}'
+	option 'name' 'VDSL2'
+	option 'dslat' '1'
+	option 'ptmprio' '1'
+	option 'ipqos' '1'
+EOF
+	fi
+	local ifname="$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)"
+	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
+elif [ "$hasVdsl" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_vdsl
+fi
+
+# populate network config ifnames #
+uci -q get network.lan.ifname >/dev/null || uci -q set network.lan.ifname="$LANPORTS"
+uci -q get network.wan.ifname >/dev/null || uci -q set network.wan.ifname="$WANPORTS"
+uci commit network
+
+sync

layer2interface/broadcom/lib/network/vlan.sh

@@ -78,8 +78,37 @@ addbrcmvlan ()
 		if [ "$ret" -eq 0 ]; then
 			ifconfig $baseifname up
 			echo "vlanctl --if-create $ifname" > /dev/console
+
+			local unmanaged=0
+			local nets net typ proto
+			nets=$(get_network_of "$ifname")
+			for net in $nets; do
+				typ=$(uci -q get network."$net".type)
+				proto=$(uci -q get network."$net".proto)
+				proto="${proto:-none}"
+				if [ "$typ" == "bridge" -a "$proto" == "none" ]; then
+					unmanaged=1
+					break
+				fi
+			done
+
+			echo '1' > /proc/sys/net/ipv6/conf/$baseifname/disable_ipv6
+			ifconfig $baseifname up
+			if [ "x$bridge" = "x" ]; then
+				bridge=0
+			fi
+
+			if [ "$bridge" -eq 1 ]; then
+				if [ "$unmanaged" == "1" ]; then
+					vlanctl --if-create $baseifname $vlan8021q
+				else
+					vlanctl --dhcp-bridged --if-create $baseifname $vlan8021q
+				fi
+			else
+				vlanctl --routed --if-create $baseifname $vlan8021q
+			fi
+
 			if [ "$bridge" -eq 1 ]; then
-				vlanctl --if-create $baseifname $vlan8021q
 				vlanctl --if $baseifname --set-if-mode-rg
 				vlanctl --if $baseifname --tx --tags 0 --default-miss-drop
 				vlanctl --if $baseifname --tx --tags 1 --default-miss-drop
@@ -95,7 +124,6 @@ addbrcmvlan ()
 				# tags 2 rx
 				vlanctl --if $baseifname --rx --tags 2 --filter-vid $vlan8021q 0 --pop-tag --set-rxif $ifname --rule-insert-before -1
 			else
-				vlanctl --routed --if-create $baseifname $vlan8021q
 				vlanctl --if $baseifname --set-if-mode-rg
 				vlanctl --if $baseifname --tx --tags 0 --default-miss-drop
 				vlanctl --if $baseifname --tx --tags 1 --default-miss-drop
@@ -125,19 +153,38 @@ brcm_virtual_interface_rules ()
 	local baseifname=$1
 	local ifname=$2
 	local bridge=$3
-	
+
+	local unmanaged=0
+	local nets net typ proto
+	nets=$(get_network_of "$ifname")
+	for net in $nets; do
+		typ=$(uci -q get network."$net".type)
+		proto=$(uci -q get network."$net".proto)
+		proto="${proto:-none}"
+		if [ "$typ" == "bridge" -a "$proto" == "none" ]; then
+			unmanaged=1
+			break
+		fi
+	done
+
 	echo '1' > /proc/sys/net/ipv6/conf/$baseifname/disable_ipv6
 	ifconfig $baseifname up
 	if [ "x$bridge" = "x" ]; then                                                                                                                         
-	  bridge=0                                                                                                                                              
-        fi
+		bridge=0
+	fi
       
 	if [ "$bridge" -eq 1 ]; then
-	  vlanctl --if-create-name $baseifname $ifname
-	  create_ebtables_bridge_rules  
+		if [ "$unmanaged" == "1" ]; then
+			vlanctl --if-create-name $baseifname $ifname
+		else
+			vlanctl --dhcp-bridged --if-create-name $baseifname $ifname
+		fi
 	else
-	  vlanctl --routed --if-create-name  $baseifname $ifname
+		vlanctl --routed --if-create-name  $baseifname $ifname
 	fi
+
+	[ "$bridge" -eq 1 ] && create_ebtables_bridge_rules
+
 	#set default RG mode
 	vlanctl --if $baseifname --set-if-mode-rg
 	#Set Default Droprules
@@ -145,9 +192,8 @@ brcm_virtual_interface_rules ()
 	vlanctl --if $baseifname --tx --tags 1 --default-miss-drop
 	vlanctl --if $baseifname --tx --tags 2 --default-miss-drop
 	vlanctl --if $baseifname --tx --tags 0 --filter-txif $ifname --rule-insert-before -1
-	
+
 	if [ "$bridge" -eq 1 ]; then
-		
 		# tags 1 tx
 		vlanctl --if $baseifname --tx --tags 1 --filter-txif $ifname --rule-insert-before -1
 		# tags 2 tx
@@ -159,7 +205,6 @@ brcm_virtual_interface_rules ()
 		# tags 2 rx
 		vlanctl --if $baseifname --rx --tags 2 --set-rxif $ifname --rule-insert-last 
 	else
-				
 		# tags 1 rx
 		vlanctl --if $baseifname --rx --tags 1 --set-rxif $ifname --filter-vlan-dev-mac-addr 0 --drop-frame --rule-insert-before -1
 		# tags 2 rx
@@ -167,9 +212,8 @@ brcm_virtual_interface_rules ()
 		# tags 0 rx 
 		vlanctl --if $baseifname --rx --tags 0 --set-rxif $ifname --filter-vlan-dev-mac-addr 1 --rule-insert-before -1
 	fi
-	
+
 	ifconfig $ifname up
 	ifconfig $ifname multicast	 
 }
 
-

libcgroup/Makefile

@@ -0,0 +1,105 @@
+#
+# Copyright (C) 2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libcgroup
+PKG_VERSION:=0.41
+PKG_RELEASE:=1
+
+PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE_FILES:=COPYING
+
+PKG_SOURCE_VERSION:=2186c97f60df7efe86ddadd5e3d9d36dd4923b98
+
+PKG_SOURCE_URL:=git://git.code.sf.net/p/libcg/libcg
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)+git$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+#PKG_BUILD_PARALLEL:=1
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libcgroup
+  SECTION:=libs
+  CATEGORY:=Libraries
+  DEPENDS:=+libpthread
+  TITLE:=Control group configuration library
+  URL:=https://sourceforge.net/p/libcg/
+endef
+
+define Package/libcgroup/description
+  Control groups, a new kernel feature in Linux 2.6.24 provides a file system
+  interface to manipulate and control the details on task grouping including
+  creation of new task groups (control groups), permission handling and task
+  assignment.
+endef
+
+define Package/libcgroup-daemon
+  SECTION:=base
+  CATEGORY:=Base system
+  DEPENDS:=+libcgroup
+  TITLE:=Control group management daemon
+  URL:=https://sourceforge.net/p/libcg/
+endef
+
+define Package/libcgroup-utils
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libcgroup
+  TITLE:=Control group configuration utilities
+  URL:=https://sourceforge.net/p/libcg/
+endef
+
+#define Package/libcgroup/conffiles
+#	/etc/config/cgroups
+#endef
+
+CONFIGURE_ARGS += \
+		--disable-bindings \
+		--disable-pam \
+		--enable-static \
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/libcgroup
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/include/libcgroup/*.h $(1)/usr/include/libcgroup/
+
+	$(INSTALL_DIR) $(1)/usr/lib $(1)/usr/lib/pkgconfig
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/libcgroup.* $(1)/usr/lib/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/libcgroup.pc $(1)/usr/lib/pkgconfig/
+endef
+
+define Package/libcgroup/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/libcgroup.so* $(1)/usr/lib/
+endef
+
+define Package/libcgroup-daemon/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/* $(1)/usr/sbin
+
+	# move to its own package?
+	$(INSTALL_DIR) $(1)/etc/config $(1)/etc/init.d
+	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
+	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
+endef
+
+define Package/libcgroup-utils/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/* $(1)/usr/bin
+endef
+
+$(eval $(call BuildPackage,libcgroup))
+$(eval $(call BuildPackage,libcgroup-daemon))
+$(eval $(call BuildPackage,libcgroup-utils))

libcgroup/files/cgroups.config

@@ -0,0 +1,40 @@
+config cgroups cgroups
+	option enabled 1
+	option defgroup iopsys/normal
+
+config cgroup _root_
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys
+	list option cpu.shares=4096
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_normal
+	list option cpu.shares=1024
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_high
+	list option cpu.shares=4096
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt
+	list option cpu.shares=1024
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_normal
+	list option cpu.shares=1024
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_high
+	list option cpu.shares=4096
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config procmap procmap
+	list procmap minidlna=3prt/normal
+

libcgroup/files/cgroups.init

@@ -0,0 +1,123 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+USE_PROCD=1
+#PROCD_DEBUG=1
+NAME=cgrulesengd
+
+CGBASEDIR=/sys/fs/cgroup
+CGCONFIG="cgroups"
+
+CGRULESCONF=/tmp/cgrules.conf
+CGCONFIGCONF=/tmp/cgconfig.conf
+
+
+cgroupinit_add_knob_val_to_list () {
+CG_KNOB_VAL_LIST="$CG_KNOB_VAL_LIST
+$1"
+}
+
+cgroupinit_create_group () {
+	local cgrp=$1
+	local dir curr
+
+	if [ "$cgrp" == "_root_" ]; then
+		dir=.
+	else
+		dir=$(echo $cgrp |tr '_' '/')
+	fi
+
+	echo -e "group $dir {" >> $CGCONFIGCONF
+
+	CG_KNOB_VAL_LIST=
+	config_list_foreach $cgrp option cgroupinit_add_knob_val_to_list
+	CG_KNOB_VAL_LIST=$(echo "$CG_KNOB_VAL_LIST" |sort)
+	curr="_none_"
+
+	for knob_val in $CG_KNOB_VAL_LIST ; do
+		local ctrlr knob val
+		
+		knob=$(echo $knob_val |awk -F= '{print $1}')
+		ctrlr=$(echo $knob |awk -F. '{print $1}')
+		val=$(echo $knob_val |awk -F= '{print $2}')
+
+		if [ "$curr" != "$ctrlr" ]; then
+			[ "$curr" == "_none_" ] || echo -e "\t}" >> $CGCONFIGCONF
+			curr=$ctrlr
+			echo -e "\t$curr {" >> $CGCONFIGCONF
+		fi
+
+		echo -e "\t\t$knob = \"$val\";" >> $CGCONFIGCONF
+	done
+
+	[ "$curr" == "_none_" ] || echo -e "\t}" >> $CGCONFIGCONF
+	echo -e "}\n" >> $CGCONFIGCONF
+}
+
+cgroupinit_add_to_rules () {
+	local name_grp=$1
+	local name grp
+
+	name=$(echo $name_grp |awk -F= '{print $1}')
+	grp=$(echo $name_grp |awk -F= '{print $2}')
+
+	echo -e "*:$name\t*\t$grp" >> $CGRULESCONF
+}
+
+cgroupinit_generate_config () {
+	local enab defgrp
+
+	config_load $CGCONFIG
+
+	config_get enab cgroups enabled "1"
+	[ $enab -eq 0 ] && return 1
+
+	config_get defgrp cgroups defgroup "_undef_"
+	[ "$defgrp" == "_undef_" ] && return 1
+
+	# mount here instead of in cgconfigparser to get all options right
+	# mounting without any controllers listed means mount all available
+	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
+		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
+		[ $? -eq 0 ] || return 1
+	fi
+
+	echo -n '' > $CGCONFIGCONF
+	config_foreach cgroupinit_create_group cgroup
+
+	echo -n '' > $CGRULESCONF
+	config_list_foreach procmap procmap cgroupinit_add_to_rules
+	echo -e "*\t*\t$defgrp" >> $CGRULESCONF
+
+	return 0
+}
+
+# cgrulesengd has hardcoded paths for configuration files
+# use symlinks to point to generated config files
+cgroupinit_cgrulesengd_fixup () {
+	[ -r /etc/cgrules.conf ] || ln -s $CGRULESCONF /etc/cgrules.conf
+	[ -r /etc/cgconfig.conf ] || ln -s $CGCONFIGCONF /etc/cgconfig.conf
+	[ -d /etc/cgconfig.d ] || mkdir /etc/cgconfig.d
+}
+
+start_service () {
+	cgroupinit_generate_config
+	[ $? -eq 0 ] || return
+
+	cgroupinit_cgrulesengd_fixup
+	/usr/sbin/cgconfigparser -l $CGCONFIGCONF || return
+
+	procd_open_instance
+	procd_set_param command /usr/sbin/cgrulesengd --nodaemon --syslog
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service () {
+	/usr/sbin/cgclear
+}
+
+service_triggers() {
+        procd_add_reload_trigger $CGCONFIG
+}
+

libucix/Makefile

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libucix
-PKG_VERSION:=0.0.1
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-target=$(firstword $(subst -, ,$(BOARD)))
-
-        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
-		-Wl,-rpath-link=$(STAGING_DIR)/lib -luci
-
-TARGET_LDFLAGS += -shared -luci -Wl,-soname
-TARGET_CFLAGS += $(FPIC) -Dtarget_$(target)=1 -Wall
-MAKE_FLAGS += TARGET="$(target)"
-
-define Package/libucix
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=UCI library
-  DEPENDS:=+libuci 
-endef
-
-define Package/libucix/description
-	UCI helper library
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Package/libucix/install
-	$(INSTALL_DIR) $(1)/usr/lib/
-	( cd $(PKG_BUILD_DIR) ; rm -f libucix.so && ln -s libucix.so.$(PKG_VERSION) libucix.so )
-	$(CP) $(PKG_BUILD_DIR)/libucix.so* $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/libucix.so* $(STAGING_DIR)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/*.h $(STAGING_DIR)/usr/include/
-endef
-
-$(eval $(call BuildPackage,libucix))

libucix/src/Makefile

@@ -1,15 +0,0 @@
-# Makefile for libucix
-
-OBJS		= libucix.o
-SRCS		= libucix.c
-
-all: libucix
-
-libucix: ${OBJS}
-	${CC} ${LDFLAGS} -o libucix.so.${PKG_VERSION} ${OBJS} ${LIBDIR} ${LIBS}
-
-clean:
-	rm -f libucix.so.* libucix.a ${OBJS}
-
-depend: 
-	${MAKEDEPEND} ${INCL} ${SRCS} ${LIBSRCS}

libucix/src/libucix.c

@@ -1,172 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2008 John Crispin <blogic@openwrt.org> 
- */
-
-#include <string.h>
-#include <stdlib.h>
-
-#include <uci_config.h>
-#include <uci.h>
-#include "ucix.h"
-
-static struct uci_ptr ptr;
-
-static inline int ucix_get_ptr(struct uci_context *ctx, const char *p, const char *s, const char *o, const char *t)
-{
-	memset(&ptr, 0, sizeof(ptr));
-	ptr.package = p;
-	ptr.section = s;
-	ptr.option = o;
-	ptr.value = t;
-	return uci_lookup_ptr(ctx, &ptr, NULL, true);
-}
-
-struct uci_context* ucix_init(const char *config_file)
-{
-	struct uci_context *ctx = uci_alloc_context();
-	uci_add_delta_path(ctx, "/var/state");
-	if(uci_load(ctx, config_file, NULL) != UCI_OK)
-	{
-		printf("%s/%s is missing or corrupt\n", ctx->savedir, config_file);
-		return NULL;
-	}
-	return ctx;
-}
-
-struct uci_context* ucix_init_path(const char *path, const char *config_file)
-{
-	struct uci_context *ctx = uci_alloc_context();
-	if(path)
-		uci_set_confdir(ctx, path);
-	if(uci_load(ctx, config_file, NULL) != UCI_OK)
-	{
-		printf("%s/%s is missing or corrupt\n", ctx->savedir, config_file);
-		return NULL;
-	}
-	return ctx;
-}
-
-void ucix_cleanup(struct uci_context *ctx)
-{
-	uci_free_context(ctx);
-}
-
-void ucix_save(struct uci_context *ctx)
-{
-	uci_set_savedir(ctx, "/tmp/.uci/");
-	uci_save(ctx, NULL);
-}
-
-void ucix_save_state(struct uci_context *ctx)
-{
-	uci_set_savedir(ctx, "/var/state/");
-	uci_save(ctx, NULL);
-}
-
-const char* ucix_get_option(struct uci_context *ctx, const char *p, const char *s, const char *o)
-{
-	struct uci_element *e = NULL;
-	const char *value = NULL;
-	if(ucix_get_ptr(ctx, p, s, o, NULL))
-		return NULL;
-	if (!(ptr.flags & UCI_LOOKUP_COMPLETE))
-		return NULL;
-	e = ptr.last;
-	switch (e->type)
-	{
-	case UCI_TYPE_SECTION:
-		value = uci_to_section(e)->type;
-		break;
-	case UCI_TYPE_OPTION:
-		switch(ptr.o->type) {
-			case UCI_TYPE_STRING:
-				value = ptr.o->v.string;
-				break;
-			default:
-				value = NULL;
-				break;
-		}
-		break;
-	default:
-		return 0;
-	}
-
-	return value;
-}
-
-int ucix_get_option_int(struct uci_context *ctx, const char *p, const char *s, const char *o, int def)
-{
-	const char *tmp = ucix_get_option(ctx, p, s, o);
-	int ret = def;
-
-	if (tmp)
-		ret = atoi(tmp);
-	return ret;
-}
-
-void ucix_add_section(struct uci_context *ctx, const char *p, const char *s, const char *t)
-{
-	if(ucix_get_ptr(ctx, p, s, NULL, t))
-		return;
-	uci_set(ctx, &ptr);
-}
-
-void ucix_add_option(struct uci_context *ctx, const char *p, const char *s, const char *o, const char *t)
-{
-	if(ucix_get_ptr(ctx, p, s, o, (t)?(t):("")))
-		return;
-	uci_set(ctx, &ptr);
-}
-
-void ucix_add_option_int(struct uci_context *ctx, const char *p, const char *s, const char *o, int t)
-{
-	char tmp[64];
-	snprintf(tmp, 64, "%d", t);
-	ucix_add_option(ctx, p, s, o, tmp);
-}
-
-void ucix_del(struct uci_context *ctx, const char *p, const char *s, const char *o)
-{
-	if(!ucix_get_ptr(ctx, p, s, o, NULL))
-		uci_delete(ctx, &ptr);
-}
-
-void ucix_revert(struct uci_context *ctx, const char *p, const char *s, const char *o)
-{
-	if(!ucix_get_ptr(ctx, p, s, o, NULL))
-		uci_revert(ctx, &ptr);
-}
-
-void ucix_for_each_section_type(struct uci_context *ctx,
-	const char *p, const char *t,
-	void (*cb)(const char*, void*), void *priv)
-{
-	struct uci_element *e;
-	if(ucix_get_ptr(ctx, p, NULL, NULL, NULL))
-		return;
-	uci_foreach_element(&ptr.p->sections, e)
-		if (!strcmp(t, uci_to_section(e)->type))
-			cb(e->name, priv);
-}
-
-int ucix_commit(struct uci_context *ctx, const char *p)
-{
-	if(ucix_get_ptr(ctx, p, NULL, NULL, NULL))
-		return 1;
-	return uci_commit(ctx, &ptr.p, false);
-}
-

libucix/src/libucix.h

@@ -1,41 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2008 John Crispin <blogic@openwrt.org> 
- */
-
-#ifndef _UCI_H__
-#define _UCI_H__
-struct uci_context* ucix_init(const char *config_file);
-struct uci_context* ucix_init_path(const char *path, const char *config_file);
-void ucix_cleanup(struct uci_context *ctx);
-void ucix_save(struct uci_context *ctx);
-void ucix_save_state(struct uci_context *ctx);
-const char* ucix_get_option(struct uci_context *ctx,
-	const char *p, const char *s, const char *o);
-int ucix_get_option_int(struct uci_context *ctx,
-	const char *p, const char *s, const char *o, int def);
-void ucix_add_section(struct uci_context *ctx,
-	const char *p, const char *s, const char *t);
-void ucix_add_option(struct uci_context *ctx,
-	const char *p, const char *s, const char *o, const char *t);
-void ucix_add_option_int(struct uci_context *ctx,
-	const char *p, const char *s, const char *o, int t);
-int ucix_commit(struct uci_context *ctx, const char *p);
-void ucix_revert(struct uci_context *ctx,
-	const char *p, const char *s, const char *o);
-void ucix_del(struct uci_context *ctx, const char *p,
-	const char *s, const char *o);
-#endif

mcpd/files/etc/config/mcpd

@@ -1,15 +0,0 @@
-config mcpd 'mcpd'
-        option igmp_proxy_interfaces 'wan'
-        option igmp_default_version '2'
-        option igmp_query_interval '125'
-        option igmp_query_response_interval '100'
-        option igmp_last_member_query_interval '10'
-        option igmp_robustness_value '2'
-        option igmp_max_groups '25'
-        option igmp_max_sources '10'
-        option igmp_max_members '25'
-        option igmp_fast_leave '1'
-        option igmp_proxy_enable '1'
-        option igmp_snooping_enable '2'
-        option igmp_snooping_interfaces 'br-lan'
-

mcpd/files/etc/hotplug.d/iface/55-mcpd

@@ -1,7 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = ifup ] || exit 0
-
-pidof mcpd >/dev/null || exit 0
-/etc/init.d/mcpd enabled && /etc/init.d/mcpd reload
-

mcpd/files/etc/init.d/mcpd

@@ -1,137 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-include /lib/network
-
-START=99
-STOP=10
-
-USE_PROCD=1
-NAME=mcpd
-PROG=/usr/sbin/mcpd
-
-
-dscp_mark() {
-	local mark=$1
-	local dm=0
-	while [[ $dm -le 56 ]]; do
-		iptables -t mangle -D POSTROUTING -p igmp -j DSCP --set-dscp $dm 2>/dev/null
-		dm=$((dm+2))
-	done
-	[ -n "$mark" ] && iptables -t mangle -A POSTROUTING -p igmp -j DSCP --set-dscp-class $mark
-}
-
-mcpd_configure() {
-	local igmp_snooping_enable
-        local igmp_snooping_interfaces
-        local igmp_proxy_interfaces
-        local igmp_proxy_enable
-        local device
-        local proxdevs=""
-	local proxbridge=""
-	local bridged=0
-	local routed=0
-	local _i
-
-        config_load mcpd
-        config_get igmp_snooping_enable mcpd igmp_snooping_enable
-        config_get igmp_snooping_interfaces mcpd igmp_snooping_interfaces
-        config_get igmp_proxy_interfaces mcpd igmp_proxy_interfaces
-	config_get igmp_proxy_enable mcpd igmp_proxy_enable
-	# disable port snooping on all bridges
-	for br in $(brctl show | grep 'br-' | awk '{print$1}' | tr '\n' ' '); do
-		brctl enableportsnooping $br 0
-	done
-
-	grep igmp /etc/config/mcpd | awk '{print $2 $3}' | sed -e "s/[\'\"]/ /g" | tr "_" "-" > /var/mcpd.conf
-
-        for proxif in $igmp_proxy_interfaces; do
-                json_load "$(ifstatus $proxif)"
-                json_get_var device device
-		case "$device" in
-			br-*)
-				bridged=1
-				proxbridge="$device"
-				json_load "$(devstatus $device)"
-				_i=1
-				json_select bridge-members
-				while json_get_var dev $_i; do
-					case "$dev" in
-						*.*)
-							ifconfig $dev | grep RUNNING >/dev/null && proxdevs="$proxdevs $dev" && break
-						;;
-					esac
-					_i=$(($_i + 1))
-				done
-				json_select ..
-			;;
-			*)
-                		proxdevs="$proxdevs $device"
-			;;
-		esac
-        done
-	if [ $igmp_proxy_enable -eq 1 ]; then
-        sed  -i "s/igmp-proxy-interfaces.*/igmp-proxy-interfaces $proxdevs/"  /tmp/mcpd.conf
-        else 
-        sed  -i "s/igmp-proxy-interfaces.*/igmp-proxy-interfaces /"  /tmp/mcpd.conf
-        fi
-        echo "igmp-mcast-interfaces $proxdevs" >> /tmp/mcpd.conf
-
-        sed  -i "s/igmp-snooping-interfaces.*/igmp-snooping-interfaces $igmp_snooping_interfaces/"  /tmp/mcpd.conf
-        for snpif in $igmp_snooping_interfaces; do
-                case "$snpif" in
-                        br-*)
-				# enable port snooping on the bridge
-                                /usr/sbin/brctl enableportsnooping $snpif "$igmp_snooping_enable"
-
-				if [ "$snpif" != "$proxbridge" ]; then
-					routed=1
-					json_load "$(devstatus $snpif)"
-					_i=1
-					json_select bridge-members
-					while json_get_var dev $_i; do
-						case "$dev" in
-							*.*)
-								routed=0
-							;;
-						esac
-						_i=$(($_i + 1))
-					done
-					json_select ..
-				fi
-                        ;;
-			eth%d|wl%d*)
-				routed=1
-			;;
-                esac
-        done
-
-	if [ "$((bridged+routed))" == "2" ]; then
-		# enable bridged+routed igmp snooping mode
-		echo "igmp-bridged-routed 1" >> /tmp/mcpd.conf
-	fi
-
-	config_get igmp_dscp_mark mcpd igmp_dscp_mark
-	dscp_mark $igmp_dscp_mark
-}
-
-service_triggers() {
-        procd_add_reload_trigger network mcpd
-}
-
-start_service() {
-	mcpd_configure
-        procd_open_instance
-        procd_set_param command "$PROG"
-	procd_set_param respawn
-        procd_close_instance
-}
-
-stop_service() {
-	service_stop $PROG
-}
-
-reload_service() {
-	stop
-	start
-}
-

mtd-utils/Makefile

@@ -1,69 +1,123 @@
-#
-# Copyright (C) 2006-2012 OpenWrt.org
+# 
+# Copyright (C) 2009-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
+
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=mtd-utils
-PKG_VERSION:=1.4.5
-PKG_RELEASE:=1
-ifeq ($(CONFIG_BCM_OPEN),y)
-PKG_SOURCE_URL:=http://ihgsp.inteno.se/git/mtd-utils
-else
-PKG_SOURCE_URL:=git@ihgsp.inteno.se:mtd-utils
-endif
+PKG_VERSION:=1.5.1
+PKG_RELEASE:=3
+PKG_INSTALL:=1
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3a0d8a01d91e0e80bc59d6320e91c07383f0ede2
+PKG_SOURCE_VERSION:=dd9f464eced6af7d5e6a4a920b727421229310f4
+PKG_SOURCE_URL:=http://public.inteno.se:/mtd-utils
+
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_CAT:=zcat
 
-HOST_BUILD_DIR:=$(BUILD_DIR_HOST)/$(PKG_NAME)-$(PKG_VERSION)
+include $(INCLUDE_DIR)/package.mk
 
-include $(INCLUDE_DIR)/host-build.mk
+FILES:= \
+	docfdisk \
+	doc_loadbios \
+	flashcp \
+	flash_erase \
+	flash_lock \
+	flash_otp_dump \
+	flash_otp_info \
+	flash_otp_lock \
+	flash_otp_write \
+	flash_unlock \
+	ftl_check \
+	ftl_format \
+	imagewrite \
+	jffs2dump \
+	jffs2reader \
+	mkfs.jffs2 \
+	mtd_debug \
+	nanddump \
+	nandtest \
+	nandwrite \
+	nftldump \
+	nftl_format \
+	recv_image \
+	rfddump \
+	rfdformat \
+	serve_image \
+	sumtool
 
-HOST_CFLAGS += -I$(STAGING_DIR_HOST)/include/e2fsprogs
-CFLAGS := $(HOST_CFLAGS) -I$(HOST_BUILD_DIR)/include -L$(HOST_BUILD_DIR) -L$(STAGING_DIR_HOST)/lib -DNO_NATIVE_SUPPORT
-ifneq ($(HOST_OS),Linux)
-CFLAGS += -Dloff_t=off_t -D__BYTE_ORDER=BYTE_ORDER -include getline.h -include endian.h -I$(CURDIR)/include -include fls.h
+ifneq ($(CONFIG_LINUX_2_4),y)
+FILES += \
+	mkfs.ubifs \
+	mtdinfo \
+	ubiattach \
+	ubiblock \
+	ubicrc32 \
+	ubidetach \
+	ubiformat \
+	ubimkvol \
+	ubinfo \
+	ubinize \
+	deubinize \
+	ubirename \
+	ubirmvol \
+	ubirsvol \
+	ubiupdatevol
 endif
 
-MTD_MAKEOPTS = \
-	CFLAGS="$(CFLAGS)" \
-	LDFLAGS="$(HOST_LDFLAGS) $(HOST_STATIC_LINKING)" \
-	WITHOUT_LZO=1 WITHOUT_XATTR=1 \
-	LZMA_STATIC_LIB="$(STAGING_DIR_HOST)/lib/liblzma.a" \
-	SUBDIRS="" \
-	BUILDDIR="$(HOST_BUILD_DIR)"
-
-define Host/Compile
-	$(MAKE) -C $(HOST_BUILD_DIR)/lib \
-		$(MTD_MAKEOPTS) \
-		TARGETS="libmtd.a libcrc32.a" \
-		LIBS="libmtd libcrc32"
-	$(MAKE) -C $(HOST_BUILD_DIR) \
-		$(MTD_MAKEOPTS) \
-		TARGETS=mkfs.jffs2
-	$(MAKE) -C $(HOST_BUILD_DIR)/ubi-utils \
-		$(MTD_MAKEOPTS) \
-		TARGETS=ubinize
-	$(MAKE) -C $(HOST_BUILD_DIR)/mkfs.ubifs \
-		$(MTD_MAKEOPTS) \
-		BUILDDIR="$(HOST_BUILD_DIR)/mkfs.ubifs"
+define PartGen
+define Package/mtd-utils-$(subst _,-,$(1))
+  TITLE:=MTD $(1)
+  URL:=http://www.linux-mtd.infradead.org/
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=mtd-utils +zlib +liblzo +libuuid
+endef
 endef
 
-define Host/Install
-	$(CP) \
-		$(HOST_BUILD_DIR)/mkfs.jffs2 \
-		$(HOST_BUILD_DIR)/mkfs.ubifs/mkfs.ubifs \
-		$(HOST_BUILD_DIR)/ubinize \
-		$(STAGING_DIR_HOST)/bin/
+define Package/mtd-utils
+  TITLE:=Utilities for flash info/debug
+  SECTION:=utils
+  CATEGORY:=Utilities
+  MENU:=1
 endef
 
-define Host/Clean
-	rm -f $(STAGING_DIR_HOST)/bin/{mkfs.jffs2,mkfs.ubifs,ubinize}
+define Package/mtd-utils/description
+  Utilities for manipulating memory technology devices.
 endef
 
-$(eval $(call HostBuild))
+define Package/mtd-utils/install
+	true
+endef
+
+$(foreach file,$(FILES),$(eval $(call PartGen,$(file))))
+
+MAKE_FLAGS += \
+	DESTDIR="$(PKG_INSTALL_DIR)" \
+	BUILDDIR="$(PKG_BUILD_DIR)" \
+	LDLIBS+="$(LIBGCC_S)" \
+	WITHOUT_XATTR=1
+
+ifeq ($(CONFIG_LINUX_2_4),y)
+MAKE_FLAGS += \
+	SUBDIRS=""
+endif
+
+define PartInstall
+define Package/mtd-utils-$(subst _,-,$(1))/install
+	$(INSTALL_DIR) \
+		$$(1)/usr/sbin
+
+	$(INSTALL_BIN) \
+		$(PKG_INSTALL_DIR)/usr/sbin/$(1) \
+		$$(1)/usr/sbin/
+endef
+endef
+
+$(foreach file,$(FILES),$(eval $(call PartInstall,$(file))))
+
+$(eval $(call BuildPackage,mtd-utils))
+$(foreach file,$(FILES),$(eval $(call BuildPackage,mtd-utils-$(subst _,-,$(file)))))

mtd-utils/include/fls.h

@@ -1,2 +0,0 @@
-#include <string.h>
-#define fls local_fls

mtd-utils/include/linux/types.h

@@ -1,18 +0,0 @@
-#ifndef _LINUX_TYPES_H
-#define _LINUX_TYPES_H
-
-#include <mtd/ubi-media.h>
-
-typedef uint16_t __u16;
-typedef uint32_t __u32;
-typedef uint64_t __u64;
-
-typedef __u16 __le16;
-typedef __u32 __le32;
-typedef __u64 __le64;
-typedef __u64 off64_t;
-
-typedef __u16  __sum16;
-typedef __u32  __wsum;
-
-#endif /* _LINUX_TYPES_H */

natalie-dect-h/Makefile

@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=natalie-dect-h
+PKG_VERSION:=12.26
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://public.inteno.se:/natalie-dect-h
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=9e2236989ff58d0db897f938b6b07b535144e0e2
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/image.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+define Package/natalie-dect-h
+  SECTION:=net
+  CATEGORY:=Base system
+  TITLE:=Dect stack headers
+  URL:=
+endef
+
+define Package/natalie-dect-h/description
+	Kernel dect driver headers
+endef
+
+
+define Package/natalie-dect-h/install
+	$(INSTALL_DIR) $(STAGING_DIR)/usr/include/natalie-dect
+	$(CP) -r $(PKG_BUILD_DIR)/SrcHeaders/* $(STAGING_DIR)/usr/include/natalie-dect/
+endef
+
+$(eval $(call BuildPackage,natalie-dect-h))

natalie-dect/Config.in

@@ -0,0 +1,4 @@
+
+config NATALIE_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

natalie-dect/Makefile

@@ -0,0 +1,63 @@
+#
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=natalie-dect
+PKG_VERSION:=12.26
+
+PKG_SOURCE_VERSION:=35fed3a10124bd660b74704011256039ba9cf54d
+ifeq ($(CONFIG_NATALIE_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=natalie-dect-open
+else
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=git@private.inteno.se:natalie-dect-12.26
+PKG_SOURCE_PROTO:=git
+endif
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/image.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+
+BCM_KERNEL_VERSION=`cat $(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-*/include/config/kernel.release`
+
+export BUILD_DIR
+export BCM_KERNEL_VERSION
+
+define Package/natalie-dect
+  SECTION:=net
+  CATEGORY:=Base system
+  TITLE:=Dect stack
+  URL:=
+  DEPENDS:=bcmkernel
+endef
+
+define Package/natalie-dect/description
+	Kernel dect driver
+endef
+
+ifeq ($(CONFIG_NATALIE_OPEN),y)
+define Build/Compile
+endef
+endif
+
+define Package/natalie-dect/install
+	mkdir -p $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra/
+ifeq ($(CONFIG_NATALIE_OPEN),y)
+	$(CP) $(PKG_BUILD_DIR)/dect.ko $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra/dect.ko
+else
+	$(CP) $(PKG_BUILD_DIR)/NatalieFpCvm6362/Src/Projects/NatalieV3/FpCvm/Linux6362/dects.ko $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra/dect.ko
+endif
+endef
+
+$(eval $(call BuildPackage,natalie-dect))

netcheck/Makefile

@@ -18,7 +18,7 @@ TARGET_CFLAGS += $(FPIC) -std=gnu99
 
 define Package/netcheck
   CATEGORY:=Utilities
-  DEPENDS:=+libuci +libjson +questd
+  DEPENDS:=+libuci +libjson-c +questd
   TITLE:=netcheck utility
 endef
 

peripheral_manager/Makefile

@@ -0,0 +1,60 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=peripheral_manager
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=2a16b98543580d376d5862a34415f24d8be15b27
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se/peripheral_manager
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/peripheral_manager
+	CATEGORY:=Utilities
+	TITLE:=Application deamon for handling of peripheral
+	URL:=
+	DEPENDS:=+libuci +libubus +libblobmsg-json bcmkernel
+endef
+
+define Package/peripheral_manager/description
+	Application handling peripheral
+endef
+
+TARGET_CPPFLAGS := \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	$(TARGET_CPPFLAGS)
+
+define Package/peripheral_manager/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/etc/
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/peripheral_manager $(1)/sbin/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/gpio_test $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,peripheral_manager))

peripheral_manager/files/etc/init.d/peripheral_manager

@@ -0,0 +1,26 @@
+#!/bin/sh /etc/rc.common
+
+START=19
+STOP=91
+
+USE_PROCD=1
+NAME=peripheral_manager
+PROG=/sbin/peripheral_manager
+
+start_service() {
+	procd_open_instance
+	procd_set_param command "$PROG" -f
+	procd_set_param respawn
+	procd_close_instance
+}
+
+service_running() {
+	ubus -t 2 wait_for led.status
+	ubus call led.status set '{"state":"ok"}'
+	ubus -t 2 wait_for button
+}
+
+stop() {
+	service_stop /sbin/peripheral_manager
+}
+

picolisp/Makefile

@@ -0,0 +1,83 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=picolisp
+PKG_VERSION=3.1.10
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR := $(BUILD_DIR)/picoLisp
+PKG_SOURCE:=picoLisp-$(PKG_VERSION).tgz
+PKG_SOURCE_URL:=http://software-lab.de/
+PKG_MD5SUM:=ac19fd6ff4d05dd2b15ea00d1ed591e7
+
+PKG_BUILD_DEPENDS+= +libopenssl +@OPENSSL_WITH_EC2M
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/picolisp
+SECTION:=lang
+CATEGORY:=Languages
+TITLE:=PicoLisp interpreter
+DEPENDS:= +libopenssl +@OPENSSL_WITH_EC2M
+URL:=http://www.picolisp.org/
+MAINTAINER:=Jeronimo Pellegrini <j_p@aleph0.info>
+endef
+
+define Package/picolisp/description
+  Picolisp is yet another dialect of the Lisp language, specially written to be radically practical and simple.
+endef
+
+TARGET_LDFLAGS += -L$(STAGING_DIR)/usr/lib
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include
+
+# A hack to make picoLisp's Makefile see the include path:
+MAKE_FLAGS += C_INCLUDE_PATH+=$(STAGING_DIR)/usr/include/ 
+
+define Package/picolisp/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/usr/lib/picolisp/
+	$(INSTALL_DIR) $(1)/usr/lib/picolisp/lib
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/pil      $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/psh      $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/watchdog $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/picolisp $(1)/usr/bin/
+	$(CP) $(PKG_BUILD_DIR)/*.l        $(1)/usr/lib/picolisp/
+	$(CP) $(PKG_BUILD_DIR)/lib/ht \
+	   		$(PKG_BUILD_DIR)/lib/ext \
+	   		$(PKG_BUILD_DIR)/lib/adm.l \
+	   		$(PKG_BUILD_DIR)/lib/app.l \
+	   		$(PKG_BUILD_DIR)/lib/boss.l \
+	   		$(PKG_BUILD_DIR)/lib/btree.l \
+	   		$(PKG_BUILD_DIR)/lib/conDbgc.l \
+	   		$(PKG_BUILD_DIR)/lib/db.l \
+		   	$(PKG_BUILD_DIR)/lib/debug.l \
+	   		$(PKG_BUILD_DIR)/lib/edit.l \
+			$(PKG_BUILD_DIR)/lib/ed.l \
+			$(PKG_BUILD_DIR)/lib/form.l \
+	   		$(PKG_BUILD_DIR)/lib/frac.l \
+	   		$(PKG_BUILD_DIR)/lib/heartbeat.l \
+	   		$(PKG_BUILD_DIR)/lib/http.l \
+	   		$(PKG_BUILD_DIR)/lib/import.l \
+	   		$(PKG_BUILD_DIR)/lib/led.l \
+	   		$(PKG_BUILD_DIR)/lib/lint.l \
+	   		$(PKG_BUILD_DIR)/lib/math32.l \
+	   		$(PKG_BUILD_DIR)/lib/math64.l \
+	   		$(PKG_BUILD_DIR)/lib/math.l \
+	   		$(PKG_BUILD_DIR)/lib/misc.l \
+	   		$(PKG_BUILD_DIR)/lib/pilog.l \
+	   		$(PKG_BUILD_DIR)/lib/prof.l \
+	   		$(PKG_BUILD_DIR)/lib/ps.l \
+	   		$(PKG_BUILD_DIR)/lib/rsa.l \
+	   		$(PKG_BUILD_DIR)/lib/scrape.l \
+	   		$(PKG_BUILD_DIR)/lib/simul.l \
+			$(PKG_BUILD_DIR)/lib/sq.l \
+			$(PKG_BUILD_DIR)/lib/too.l \
+			$(PKG_BUILD_DIR)/lib/xhtml.l \
+	   		$(PKG_BUILD_DIR)/lib/xm.l \
+	   		$(PKG_BUILD_DIR)/lib/xml.l \
+	   		$(PKG_BUILD_DIR)/lib/xmlrpc.l	$(1)/usr/lib/picolisp/lib/
+	touch $(1)/usr/lib/picolisp/lib/tags
+	$(STRIP) $(1)/usr/bin/picolisp
+endef
+
+$(eval $(call BuildPackage,picolisp))

picolisp/patches/001-mips.diff

@@ -0,0 +1,43 @@
+diff -Nur picoLisp/Makefile picoLisp-new/Makefile
+--- picoLisp/Makefile	1969-12-31 21:00:00.000000000 -0300
++++ picoLisp-new/Makefile	2015-06-02 15:38:07.469726899 -0300
+@@ -0,0 +1,6 @@
++all:
++	(cd src; make)
++
++clean:
++	(cd src; make clean)
++
+diff -Nur picoLisp/src/Makefile picoLisp-new/src/Makefile
+--- picoLisp/src/Makefile	2015-03-31 15:48:22.000000000 -0300
++++ picoLisp-new/src/Makefile	2015-06-02 15:40:43.541491599 -0300
+@@ -6,9 +6,13 @@
+ 
+ picoFiles = main.c gc.c apply.c flow.c sym.c subr.c big.c io.c net.c tab.c
+ 
+-CC = gcc
++#CC = gcc
+ # CCLD is the cc (compiler frontend) to use for the link step.
+-CCLD = gcc
++#CCLD = gcc
++
++# Honor the $(CC) variable, inherited form the environment (it's essential
++# when cross-compiling)
++CCLD = $(CC)
+ 
+ CFLAGS = -c -O2 -pipe \
+ 	-falign-functions=32 -fomit-frame-pointer -fno-strict-aliasing \
+@@ -19,10 +23,10 @@
+ 
+ ifeq ($(shell uname), Linux)
+ 	OS = Linux
+-	CFLAGS += -m32
+-	PICOLISP-FLAGS = -m32 -rdynamic
++	CFLAGS += -mabi=32 -fPIC
++	PICOLISP-FLAGS = -rdynamic
+ 	LIB-FLAGS = -lm -ldl
+-	DYNAMIC-LIB-FLAGS = -m32 -shared -export-dynamic
++	DYNAMIC-LIB-FLAGS = -shared -export-dynamic -fPIC
+ 	LCRYPT = -lcrypt
+ 	STRIP = strip
+ else

port-management/Makefile

@@ -8,13 +8,12 @@ PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 include $(INCLUDE_DIR)/package.mk
 
 define Package/port-management
-  CATEGORY:=Base system
+  CATEGORY:=Utilities
   TITLE:=Port management tool
 endef
 
 define Package/port-management/description
-	port-management contains necessary tools to create
-	layer2 interfaces
+	Port configuration utility
 endef
 
 define Build/Prepare

port-management/files/etc/init.d/port_management

@@ -12,14 +12,14 @@ check_for_config(){
 	if [ -s "/etc/config/ports" ]
 	then 
 		debug_print "file exists and has content" 
-		if uci -q show ports >/dev/null #are there any valid content then continue
+		if uci -q get ports.@ethport[0] >/dev/null #are there any valid content then continue
 		then 
 			return 0
 		else
 			rm -f /etc/config/ports
 		fi
 	fi
-	debug_print "file doesent exsists or is empty"
+	debug_print "ports config file doesn't exsist or is empty"
 	touch /etc/config/ports
 	local portnames="$(db get hw.board.ethernetPortNames)"
 	local portorder="$(db get hw.board.ethernetPortOrder)"