gigaset-elements 2.4.2 - dg400 integration, dectmngr2 support

2025-12-24 19:14:05 +08:00 · 2016-10-28 13:43:29 +02:00
199 changed files with 2199 additions and 12864 deletions
--- a/4g-support/files/etc/hotplug.d/usb/30-usbnet
+++ b/4g-support/files/etc/hotplug.d/usb/30-usbnet
@@ -1,6 +1,6 @@
 #!/bin/sh

-local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev interface usbno usbbr
+local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev usbno usbbr

 sanitize() {
 	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
@@ -20,7 +20,6 @@ find_usb_attrs() {
 	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
 	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
 	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
-	interface=$(cat $usb_dir/interface)
 	if [ -n "$cdcdev" ]; then
 		comdev=$cdcdev
 		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
@@ -49,8 +48,6 @@ case "$usbbr" in
 	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
 esac

-#devno=$(basename $DEVPATH)
-
 find_usb_attrs
 if [ "$ACTION" = add ]; then
 	convert_to_mbim "$uVid:$uPid"
@@ -58,9 +55,6 @@ if [ "$ACTION" = add ]; then
 		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
 			sed -i "/$usbno:$usbbr/ d" /var/usbnets
 			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
-			ubus send hotplug.usb "{'action': 'add', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
-			'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
-
 		fi
 	fi
 fi
@@ -68,7 +62,5 @@ fi
 if [ "$ACTION" = remove ]; then
 	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
 		sed -i "/$usbno:$usbbr/ d" /var/usbnets
-		ubus send hotplug.usb "{'action': 'remove', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
-		'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
 	fi
 fi
--- a/asterisk-1.8.x-mod/Makefile
+++ b/asterisk-1.8.x-mod/Makefile
@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=asterisk18-mod
 PKG_VERSION:=1.8.10.1

-PKG_SOURCE_VERSION:=ee99af0d91a2197529b13075d802ebc37e644e40
+PKG_SOURCE_VERSION:=015d279241d0ac5d8c1321aa6f78b9ae551575d1
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x

@@ -119,7 +119,7 @@ endef
 define Package/asterisk18-mod-cdr
 $(call Package/asterisk18-mod/Default)
  TITLE:=CDR support
-  DEPENDS:= asterisk18-mod +libsqlite3
+  DEPENDS:= asterisk18-mod
 endef

 define Package/asterisk18-mod-cdr/description
@@ -188,6 +188,17 @@ $(call Package/asterisk18-mod/Default/description)
 support to Asterisk.
 endef

+define Package/asterisk18-mod-chan-mobile
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Mobile channel support
+  DEPENDS:= asterisk18-mod +bluez-libs
+endef
+
+define Package/asterisk18-mod-chan-mobile/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mobile support to Asterisk.
+endef
+
 define Package/asterisk18-mod-res-timing-timerfd
 $(call Package/asterisk18-mod/Default)
  TITLE:= Timerfd Timing Interface
@@ -330,6 +341,14 @@ else
    --without-spandsp
 endif

+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-mobile),)
+  CONFIGURE_ARGS+= \
+	--with-bluetooth="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-bluetooth
+endif
+
 ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
  CONFIGURE_ARGS+= \
 	--with-srtp="$(STAGING_DIR)/usr"
@@ -455,8 +474,6 @@ define Package/asterisk18-mod/install
 	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_BIN)  ./files/asterisk.hotplug $(1)/etc/hotplug.d/iface/80-asterisk
 endef

 define Package/asterisk18-mod-sounds/install
@@ -554,6 +571,17 @@ define Package/asterisk18-mod-chan-gtalk/install
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
 endef

+define Package/asterisk18-mod-chan-mobile/conffiles
+/etc/asterisk/chan_mobile.conf
+endef
+
+define Package/asterisk18-mod-chan-mobile/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/chan_mobile.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mobile.so $(1)/usr/lib/asterisk/modules/
+endef
+
 define Package/asterisk18-mod-res-timing-timerfd/install
 	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
@@ -705,6 +733,7 @@ $(eval $(call BuildPackage,asterisk18-mod-cdr))
 $(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
 $(eval $(call BuildPackage,asterisk18-mod-res-voice))
 $(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mobile))
 $(eval $(call BuildPackage,asterisk18-mod-res-fax))
 $(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
 $(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
--- a/asterisk-1.8.x-mod/files/asterisk.hotplug
+++ b/asterisk-1.8.x-mod/files/asterisk.hotplug
@@ -1,19 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = ifup ] || exit 0
-
-config_load voice_client
-config_get bindintf SIP bindintf
-
-[ "$INTERFACE" == "$bindintf" ] || exit 0
-
-. /lib/functions/network.sh
-
-if [ -n "$bindintf" ]; then
-	network_get_ipaddr bindaddr "$bindintf"
-	[ -z "$bindaddr" ] && network_get_ipaddr6 bindaddr "$bindintf"
-	bindaddr="${bindaddr:-0.0.0.0}"
-	sed -i "s/bindaddr=.*/bindaddr=$bindaddr/g" /etc/asterisk/sip.conf
-	[ -e /var/run/asterisk/asterisk.ctl ] && /etc/init.d/asterisk reload
-fi
-
--- a/asterisk-1.8.x-mod/files/asterisk.init
+++ b/asterisk-1.8.x-mod/files/asterisk.init
@@ -3,15 +3,18 @@
 START=98
 STOP=10

-. /usr/share/libubox/jshn.sh
-. /lib/functions/network.sh
 USE_PROCD=1
 NAME=asterisk
 PROG=/usr/sbin/asterisk
 DEFAULT=/etc/default/asterisk
-CONFDIR=/etc/asterisk

 init_asterisk() {
+	# do not start asterisk until the
+	# router receives a default route
+	while ! ip r | grep -q default; do
+		sleep 1
+	done
+
 	[ -f $DEFAULT ] && . $DEFAULT
 	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
 	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
@@ -39,8 +42,6 @@ start_service() {
 }

 reload_service() {
-	asterisk -rx "config reload $CONFDIR/sip.conf"
-	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
 	asterisk -rx "brcm reload"
--- a/ated/Makefile
+++ b/ated/Makefile
@@ -1,67 +0,0 @@
-#
-# Copyright (C) 2016 inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/ated
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))
--- a/bashdb/Makefile
+++ b/bashdb/Makefile
@@ -1,62 +0,0 @@
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bashdb
-PKG_VERSION:=4.4-0.92
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-#PKG_SOURCE_URL:=http://sourceforge.net/projects/bashdb/files/bashdb/$(PKG_VERSION)
-PKG_SOURCE_URL:=@SF/bashdb/
-PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
-#PKG_CAT:=zcat
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Bash script debugging utility.
-  URL:=http://sourceforge.net/projects/bashdb/
-endef
-
-define Package/$(PKG_NAME)/description
-  Bash script debugging utility.
-endef
-
-define Build/Compile
-        $(MAKE) -C $(PKG_BUILD_DIR) \
-                $(TARGET_CONFIGURE_OPTS) \
-                CFLAGS="$(TARGET_CFLAGS) -DLINUX $(TARGET_CPPFLAGS) \
-                        -I./src" \
-                LIBS="$(TARGET_LDFLAGS)" \
-                DESTDIR="$(PKG_INSTALL_DIR)"
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bashdb $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/share
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.sh  $(1)/usr/share/$(PKG_NAME)/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.inc  $(1)/usr/share/$(PKG_NAME)/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/init
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/init/*.sh  $(1)/usr/share/$(PKG_NAME)/init/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/show_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/set_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/info_sub
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/*.sh $(1)/usr/share/$(PKG_NAME)/command/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/show_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/show_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/set_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/set_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/info_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/info_sub/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/*.sh $(1)/usr/share/$(PKG_NAME)/lib/
-endef
-
-$(eval $(call BuildPackage,bashdb))
--- a/bluez/Makefile
+++ b/bluez/Makefile
@@ -0,0 +1,81 @@
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bluez
+PKG_VERSION:=5.28
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_SOURCE_URL:=http://www.kernel.org/pub/linux/bluetooth
+PKG_MD5SUM:=bc20a8285530758c68f6a60e4ca62a15
+
+PKG_FIXUP:=autoreconf
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/bluez
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libpthread +libusb-compat +glib2 +dbus +libreadline $(INTL_DEPENDS) $(ICONV_DEPENDS) 
+  TITLE:=Bluetooth stack new version 
+  URL:=http://www.bluez.org/
+endef
+
+define Package/bluez/conffiles
+/etc/config/bluetooth
+endef
+
+TARGET_LDFLAGS+= \
+                -Wl,-rpath-link=$(STAGING_DIR)/usr/lib/libiconv-full/lib \
+
+CONFIGURE_ARGS += \
+		--enable-shared \
+		--disable-cups \
+		--enable-debug \
+		--disable-test \
+		--disable-obex \
+		--disable-systemd \
+		--disable-udev \
+		--enable-tools \
+		--enable-experimental \
+		--enable-library \
+		--disable-static \
+
+define Build/Compile
+    $(MAKE) -C $(PKG_BUILD_DIR) \
+        LDFLAGS="$(TARGET_LDFLAGS) \
+            -L$(ICONV_PREFIX)/lib \
+            -L$(INTL_PREFIX)/lib -lm -lncurses" \
+        DESTDIR="$(PKG_INSTALL_DIR)" \
+        all install
+endef
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/bluetooth/*.h $(1)/usr/include/bluetooth
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libbluetooth.* $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/bluez.pc $(1)/usr/lib/pkgconfig/
+endef
+define Package/bluez/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_INSTALL_DIR)/usr/bin/* $(1)/usr/bin/
+
+	$(INSTALL_DIR) $(1)/etc/bluetooth
+	$(INSTALL_DIR) $(1)/etc/dbus-1/system.d
+	$(CP)  $(PKG_INSTALL_DIR)/etc/dbus-1/system.d/bluetooth.conf $(1)/etc/dbus-1/system.d/
+
+	$(INSTALL_DIR) $(1)/usr/lib/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/bluetooth/* $(1)/usr/lib/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libblue* $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,bluez))
--- a/brcmslic/Makefile
+++ b/brcmslic/Makefile
@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=0.1
-PKG_SOURCE_URL:=git@private.inteno.se:brcmslic
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=837ec19e37650e424e77c921672a0806e198ba7b
-PKG_NAME:=brcmslic
-
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/brcmslic
-  CATEGORY:=Utilities
-  TITLE:=Brcmslic
-  URL:=
-  DEPENDS:=
-endef
-
-define Package/brcmslic/description
-	Brcmslic
-endef
-
-
-define Package/brcmslic/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/brcmslic $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endpt $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,brcmslic))
--- a/brcmslic/files/dect.config
+++ b/brcmslic/files/dect.config
@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-
--- a/btle_alarm/Makefile
+++ b/btle_alarm/Makefile
@@ -0,0 +1,47 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=btle_alarm
+PKG_VERSION:=1.0.6
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=b505d7ae1524a213ca3de7f8ee15a7d51c6bbbd5
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/btle_alarm
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/btle_alarm
+  SECTION:=base
+  CATEGORY:=Utilities
+  TITLE:=Ethernet bridging configuration utility
+  #DESCRIPTION:=This variable is obsolete. use the Package/name/description define instead!
+  URL:=http://btle_alarm.sourceforge.net/
+  DEPENDS:=+bluez +libncurses
+endef
+
+define Package/btle_alarm/description
+ Ethernet bridging configuration utility
+ Manage ethernet bridging; a way to connect networks together to
+ form a larger network.
+endef
+
+define Package/btle_alarm/install
+
+	$(CP) ./files/* $(1)/
+
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/btle_alarm $(1)/sbin/
+
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DATA) ./files/btle_alarm.conf $(1)/etc/config/btle_alarm
+
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/etc/init.d/* $(1)/etc/init.d/
+
+endef
+
+$(eval $(call BuildPackage,btle_alarm))
--- a/btle_alarm/files/btle_alarm.conf
+++ b/btle_alarm/files/btle_alarm.conf
@@ -0,0 +1,2 @@
+config info 'Device'
+        option mac 'D0:39:72:B6:23:D6'
--- a/btle_alarm/files/etc/init.d/btle_alarm
+++ b/btle_alarm/files/etc/init.d/btle_alarm
@@ -0,0 +1,29 @@
+#!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+
+START=99
+
+start() {
+        for i in down reset up;do
+            hciconfig hci0 $i
+        done
+        mac=`uci get btle_alarm.Device.mac`
+        if [ $? -eq 0 ];then
+            hcitool lewladd $mac
+        else
+            hcitool lewladd D0:39:72:B6:43:8A
+            hcitool lewladd D0:39:72:B6:18:AA
+        fi
+       sleep 1
+        /sbin/btle_alarm &> /dev/null &
+        echo $! > /tmp/btle_alarm.pid
+}
+
+stop() {
+        hciconfig hci0 down
+        kill -9 `cat /tmp/btle_alarm.pid`
+        rm /tmp/btle_alarm.pid
+        sleep 1
+}
--- a/catv/files/etc/config/catv
+++ b/catv/files/etc/config/catv
@@ -1,4 +1,4 @@

 config service 'catv'
-        option enable '0'
+        option enable 'no'
        option filter '3'
--- a/catv/files/etc/init.d/catv
+++ b/catv/files/etc/init.d/catv
@@ -10,16 +10,12 @@ USE_PROCD=1

 start_service() {
 	local enable=0
-	local filter=0
+        local filter=0

-	config_load catv
-	config_get_bool enable catv enable 0
-	config_get filter catv filter
-	if [ $enable -eq 0 ]; then
-		ubus call catv set-enable "{\"enable\":\"off\"}"
-	else
-		ubus call catv set-enable "{\"enable\":\"on\"}"
-	fi
+        config_load catv
+        config_get enable catv enable
+        config_get filter catv filter
+	ubus call catv set-enable "{\"enable\":\"$enable\"}"
 	ubus call catv set-filter "{\"filter\":\"$filter\"}"

 }
--- a/dectmngr2/Makefile
+++ b/dectmngr2/Makefile
@@ -11,7 +11,7 @@ PKG_RELEASE:=1
 PKG_VERSION:=1.1.0
 PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=13da1568d57b8e6732dadc16de828d64c81906b8
+PKG_SOURCE_VERSION:=ee63f0c087840adba9d944ae31d71a3ef9d64043
 PKG_NAME:=dectmngr2


--- a/eventlog/Makefile
+++ b/eventlog/Makefile
@@ -1,49 +0,0 @@
-#
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=eventlog
-PKG_VERSION:=0.2.9
-PKG_RELEASE:=2
-
-PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
-PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
-PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
-
-PKG_FIXUP:=autoreconf
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libeventlog
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=A new API to format and send structured log messages.
-endef
-
-define Package/eventlog/description
-  A new API to format and send structured log messages. It supports multiple message
-  representations (plain, XML attributes and XML tags) and multiple output methods
-  (local syslogd).
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
-endef
-
-define Package/libeventlog/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libeventlog))
--- a/fping/Makefile
+++ b/fping/Makefile
@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fping
-PKG_VERSION:=4.0
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://fping.org/dist/
-PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
-
-PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
-PKG_LICENSE:=BSD-4-Clause
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fping
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
-  URL:=http://fping.org/
-endef
-
-
-define Package/fping/description
-	fping is a ping like program which uses the Internet Control Message Protocol
-	(ICMP) echo request to determine if a target host is responding.  fping
-	differs from ping in that you can specify any number of targets on the command
-	line, or specify a file containing the lists of targets to ping.  Instead of
-	sending to one target until it times out or replies, fping will send out a
-	ping packet and move on to the next target in a round-robin fashion.
-endef
-
-CONFIGURE_ARGS+= \
-	--enable-ipv4 \
-	--enable-ipv6
-
-TARGET_CFLAGS += -std=gnu99
-
-define Package/fping/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,fping))
--- a/gigaset-elements/Makefile
+++ b/gigaset-elements/Makefile
@@ -10,7 +10,7 @@ PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)

 PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
+PKG_SOURCE_VERSION:=$(PKG_GIGASET_ELEMENTS_VERSION)


 PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
@@ -26,7 +26,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/gigaset-elements
  SECTION:=utils
  CATEGORY:=Utilities
-  DEPENDS:=+libjson-c +libcurl +libpthread
+  DEPENDS:=+libjson-c +libcurl
  TITLE:=Gigaset elements
 endef

--- a/ice-client/Makefile
+++ b/ice-client/Makefile
@@ -5,10 +5,6 @@ PKG_NAME:=ice-client

 CFMODULES:=$(filter CONFIG_PACKAGE_$(PKG_NAME)-%,$(.VARIABLES))
 CFMODULES:=$(subst CONFIG_PACKAGE_$(PKG_NAME)-,,$(CFMODULES))
-
-#CFMODULES:=$(CFMODULES) webaccess texec iperf
-#CFMODULES:=$(sort $(CFMODULES))
-
 $(info Building package: $(PKG_NAME))
 $(info Building with additional modules: $(CFMODULES))
 export CFMODULES
@@ -19,33 +15,32 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk

 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.0.1
-PKG_RELEASE:=RC1
+BASE_PKG_VERSION:=3.4.1
+PKG_RELEASE:=RC11
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION

 ###########################--RELEASE--################################

-PKG_SOURCE_VERSION:=a2635dd11c477d70728ab6cbe5c2dee3965dbe14
+PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
+PKG_SOURCE_VERSION:=184d29446fe6103f567c968bf35569625326a82c
 ifeq ($(CONFIG_ICE_OPEN),y)
-TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_SOURCE:=$(PKG_NAME)-$(TARGET_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+#PKG_NAME:=ice-client-open
 else
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=git@private.inteno.se:ice-client.git
-PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
-
+PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
 endif


 ###########################--RELEASE--################################

-#include $(INCLUDE_DIR)/uclibc++.mk
 include $(INCLUDE_DIR)/package.mk

 define Package/ice-client/Default
@@ -78,7 +73,7 @@ endef
 # PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
 # 
 #
-# These settings allow you to specify a source folder where your source code is located
+# These settings allow you to specify a soruce folder where your source code is located
 # This avoids having to tar-zip or fetch from git each time
 # Changes can be done in your sources while the build is performed somewhere else
 # If you forget some settings, your source folder will be deleted!!! So be carefull and 
@@ -87,6 +82,7 @@ endef
 #define Build/Prepare
 #	rm -rf $(PKG_BUILD_DIR)
 #	ln -s /home/erik/Desktop/ice-client $(PKG_BUILD_DIR)
+##	ln -s /home/erik/Desktop/checkCompilation/iopsys-client $(PKG_BUILD_DIR)
 #endef

 ###########################--DEVELOPMENT--################################
@@ -144,7 +140,7 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/core/ice $(1)/bin
 	$(CP) $(PKG_BUILD_DIR)/modules/system/ubusevent/obj/iopsys/ubusevent $(1)/bin
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1,texecService.so.1.0.1,webaccessService.so.1.0.1} $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1,texecService.so.1.0.1} $(1)/usr/lib
 	$(CP) $(PKG_BUILD_DIR)/lib/wsice/obj/iopsys/libwsice.so $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/execute
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/progress
@@ -154,15 +150,12 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/scripts/etc/config/ice $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/iopsys
 	$(CP) $(PKG_BUILD_DIR)/scripts/server.ini $(1)/etc/iopsys	
-	$(CP) $(PKG_BUILD_DIR)/scripts/defaults.ini $(1)/etc/iopsys	
 	$(CP) $(PKG_BUILD_DIR)/scripts/modify.ini $(1)/etc/iopsys
 	$(INSTALL_DIR) $(1)/etc/iopsys/certificates
 	$(CP) $(PKG_BUILD_DIR)/scripts/cert_server_ca.pem $(1)/etc/iopsys/certificates
 	$(CP) $(PKG_BUILD_DIR)/scripts/inteno_root_ca.pem $(1)/etc/iopsys/certificates
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(CP) $(PKG_BUILD_DIR)/scripts/ice-client $(1)/etc/init.d/ice-client
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
-	$(CP) ./files/ice-client.uci_default $(1)/etc/uci-defaults/95-ice-client
 endef
 endif

@@ -912,7 +905,7 @@ PROC_ID=$$(cat /tmp/ice.pid)
 PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
 if [ -n "$$PROC_EXISTS" ]; then
  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=tExecMgr" > /tmp/cfin
+  echo "system moduleRemove topic=texec" > /tmp/cfin
 fi
 exit 0
 endef
@@ -943,54 +936,6 @@ fi
 exit 0
 endef

-# webaccess
-define Package/ice-client-webaccess
-  $(call Package/ice-client/Default)
-  TITLE:=webaccess
-  DEPENDS+= 
-endef
-
-define Package/ice-client-webaccess/description
-remote script execution module for ice-client
-endef
-
-define Package/ice-client-webaccess/prerm
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=webAccess" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-webaccess/preinst
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=webAccess" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-webaccess/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/webaccessService.so.1.0.1 $(1)/usr/lib
-endef
-
-define Package/ice-client-webaccess/postinst
-#!/bin/sh
-read -t 1 <>/tmp/cfout
-if [ -f /tmp/ice.pid  ]; then
-	echo "system moduleAdd file=webaccessService.so.1.0.1" package="ice-client-webaccess" > /tmp/cfin
-fi
-exit 0
-endef
 # bmspeedtest
 define Package/ice-client-bcmspeedmgr
  $(call Package/ice-client/Default)
@@ -1041,5 +986,4 @@ $(eval $(call BuildPackage,ice-client-monitor))
 $(eval $(call BuildPackage,ice-client-gigaset))
 $(eval $(call BuildPackage,ice-client-texec))
 $(eval $(call BuildPackage,ice-client-bcmspeedmgr))
-$(eval $(call BuildPackage,ice-client-webaccess))
 endif
--- a/ice-client/files/ice-client.uci_default
+++ b/ice-client/files/ice-client.uci_default
@@ -1,67 +0,0 @@
-#!/bin/sh
-
-grep -rq "^ice:" /etc/passwd || {
-	adduser -D -H -s /bin/false ice
-}
-
-uci -q delete passwords.ice
-uci -q set passwords.ice=usertype
-uci -q set passwords.ice.password="\$WPAKEY"
-uci -q add_list passwords.ice._access_r=root
-uci -q commit passwords
-
-uci show rpcd | grep username=.*ice.* >/dev/null || {
-cat >> /etc/config/rpcd << EOF
-
-config login
-	option username 'ice'
-	option password '\$p\$ice'
-	list _access_r 'none'
-	list write 'user-user'
-	list write 'juci-broadcom-dsl'
-	list write 'juci-broadcom-dsl-admin'
-	list write 'juci-broadcom-ethernet'
-	list write 'juci-broadcom-iptv'
-	list write 'juci-broadcom-vlan'
-	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-wireless'
-	list write 'juci-wireless-admin'
-	list write 'juci-catv'
-	list write 'juci-ddns'
-	list write 'juci-diagnostics'
-	list write 'juci-dnsmasq-dhcp'
-	list write 'juci-dropbear'
-	list write 'juci-ethernet'
-	list write 'juci-event'
-	list write 'juci-firewall-fw3'
-	list write 'juci-iconnect'
-	list write 'juci-igmpinfo'
-	list write 'juci-inteno-backup'
-	list write 'juci-inteno-multiwan'
-	list write 'juci-inteno-provisioning'
-	list write 'juci-inteno-qos'
-	list write 'juci-inteno-voice-client'
-	list write 'juci-minidlna'
-	list write 'juci-mod-status'
-	list write 'juci-mod-system'
-	list write 'juci-natalie-dect'
-	list write 'juci-netmode'
-	list write 'juci-network-netifd'
-	list write 'juci-owsd'
-	list write 'juci-printer'
-	list write 'juci-realtime-graphs'
-	list write 'juci-samba'
-	list write 'juci-sfp'
-	list write 'juci-snmpd'
-	list write 'juci-sysupgrade'
-	list write 'juci-uhttpd'
-	list write 'juci-upnp'
-	list write 'juci-usb'
-	list write 'core'
-	list write 'unauthenticated'
-
-EOF
-}
-
-exit 0
-
--- a/icwmp/Makefile
+++ b/icwmp/Makefile
@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2017-11-24
+PKG_VERSION:=3.0-2016-07-07
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d74b88913f676ebf9a210c4674555d080e57ff52
+PKG_SOURCE_VERSION:=6fac1df3418d727388162d5e006c7a756c9ff8d2
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -34,7 +34,7 @@ define Package/icwmp/Default
  SECTION:=utils
  CATEGORY:=Utilities
  TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libexpat +curl
 endef

 define Package/icwmp/description
@@ -66,10 +66,6 @@ define Build/Prepare
 endef
 endif

-ifeq ($(CONFIG_TARGET_IBOARDID),"EX400")
-TARGET_CFLAGS += -DEX400
-endif
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ

@@ -126,18 +122,16 @@ endif

 define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(CP) ./files/icwmp.hotplug $(1)/etc/hotplug.d/iface/90-icwmp
 ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(INSTALL_DIR) $(1)/usr/share/icwmp
 	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
--- a/icwmp/files/icwmp.hotplug
+++ b/icwmp/files/icwmp.hotplug
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-grep -q "Designated" /etc/banner || exit 0
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-local islan="$(uci -q get network.$INTERFACE.is_lan)"
-[ "$islan" == "1" ] && exit 0
-
-local proto="$(uci -q get network.$INTERFACE.proto)"
-[ "$proto" == "none" ] && exit 0
-
-local ifname="$(uci -q get network.$INTERFACE.ifname)"
-[ "${ifname:0:1}" == "@" ] && exit 0
-
-mkdir -p /tmp/ipv4
-
-local previpaddr=""
-local curipaddr=""
-local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-previpaddr=$(cat $ipaddrfile 2>/dev/null)
-network_get_ipaddr curipaddr $INTERFACE
-[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-local prevgateway=""
-local curgateway=""
-local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-prevgateway=$(cat $gatewayfile 2>/dev/null)
-network_get_gateway curgateway $INTERFACE
-[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-local prevsubnets=""
-local cursubnets=""
-local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-prevsubnets=$(cat $subnetsfile 2>/dev/null)
-network_get_subnets cursubnets $INTERFACE
-[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-[ "$previpaddr" = "$curipaddr" -a "$prevgateway" = "$curgateway" -a "$prevsubnets" = "$cursubnets" ] && exit 0
-
-[ -f /etc/config/cwmp ] && /etc/init.d/icwmpd reload &
-
--- a/ifbt/Makefile
+++ b/ifbt/Makefile
@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ifbt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=da97d6668d3c0e3f2be226c66b406e90179ada81
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@private.inteno.se:ifbt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ifbt
-	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-	TITLE:=Fast BSS Transition
-endef
-
-define Package/ifbt/description
-	ifbt is Iopsys application for fast BSS transition
-endef
-
-define Package/ifbt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ifbt))
--- a/inbd/Makefile
+++ b/inbd/Makefile
@@ -1,53 +0,0 @@
-#
-# Copyright (C) 2016 Inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=inbd
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=92f918d26c0ffc22d1704f5ea6cbb0bd7fdbdab9
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se/inbd
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inbd
-	CATEGORY:=Utilities
-	TITLE:=Inteno Netlink Bridge Daemon
-	URL:=
-	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
-endef
-
-define Package/inbd/description
-	Application handling netlink messages from kernel and sending them out on ubus.
-endef
-
-define Package/inbd/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inbd $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/inbd $(1)/etc/init.d/
-endef
-
-$(eval $(call BuildPackage,inbd))
--- a/inteno-netmodes/Makefile
+++ b/inteno-netmodes/Makefile
@@ -1,35 +0,0 @@
-#
-# Copyright (C) 2016 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=inteno-netmodes
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inteno-netmodes
-  CATEGORY:=Base system
-  DEPENDS:=+fping
-  TITLE:=Predefined Network Modes
-endef
-
-define Package/inteno-netmodes/description
-	Predefined Network Modes
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/inteno-netmodes/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,inteno-netmodes))
--- a/inteno-netmodes/files/etc/config/netmode
+++ b/inteno-netmodes/files/etc/config/netmode
@@ -1,5 +0,0 @@
-config mode 'setup'
-        option dir '/etc/netmodes'
-        option detail ''
-        option curmode 'routed'
-
--- a/inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-handler
+++ b/inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-handler
@@ -1,119 +0,0 @@
-#!/bin/sh
-
-[ "$INTERFACE" != "wan" ] && exit
-
-. /lib/functions/network.sh
-
-network_get_ipaddr ip $INTERFACE
-repeaterready="$(uci -q get netmode.setup.repeaterready)"
-
-[ -z "$ip" ] && exit
-
-toggle_firewall() {
-	local section=$1
-	local disable=$2
-	config_get name "$1" name
-	if [ "$name" == "wan" ]; then
-		uci -q set firewall.settings.disabled=$disable
-		if [ "$disable" == "1" ]; then
-			uci -q set firewall.$section.input="ACCEPT"
-		else
-			uci -q set firewall.$section.input="REJECT"
-		fi
-		uci -q commit firewall
-	fi
-}
-
-set_disabled() {
-	config_load firewall
-	config_foreach toggle_firewall zone $1
-	/etc/init.d/firewall reload
-}
-
-is_inteno_macaddr()
-{
-	macaddr=$1
-
-	echo $macaddr | grep -i -e "^00:22:07" \
-				-e "^02:22:07" \
-				-e "^44:D4:37" \
-				-e "^00:0C:07" \
-				-e "^02:0C:07" \
-				-e "^06:0C:07" \
-				-e "^00:0C:43" \
-				-e "^02:0C:43" \
-				-e "^06:0C:43" \
-	&& return
-	false
-}
-
-switch_mode() {
-	[ "$repeaterready" == "1" ] || return
-
-	# flush the ip on br-lan; br-lan will anyhow be deleted.
-	# this is needed if the ip received on the wan is also from the same net
-	ip addr flush dev br-lan
-
-	# flush iptables in case the MASTER
-	# tries to configure us before
-	# firewall is disabled the proper way
-	iptables -F
-
-	ubus call leds set  '{"state" : "allflash"}'
-
-	local ret=0
-	# let netmode-conf up to 20 seconds before switching mode
-	for tm in 2 4 6 8; do
-		if [ -f /tmp/wificontrol.txt ]; then
-			ret=1
-			break
-		fi
-		sleep $tm
-	done
-
-	# let netmode-conf take over
-	[ $ret -eq 1 ] && return
-
-	# go head with switching mode
-	touch -f /tmp/switching_mode
-	echo "Switching to 'extender' mode" > /dev/console
-	uci -q set netmode.setup.curmode='repeater'
-	uci set netmode.setup.repeaterready=0
-	uci commit netmode
-	/etc/init.d/netmode reload
-	echo "Restarting network services" > /dev/console
-	ubus call network reload
-	wifi reload nodat
-	ubus call router.network reload
-	ubus call leds set  '{"state" : "normal"}'
-	rm -f /tmp/switching_mode
-}
-
-test_ip() {
-	if [ -n "$(echo $ip | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ]; then
-		# private IP
-		switch_mode
-		set_disabled 1
-	else
-		# public IP
-		set_disabled 0
-		[ "$1" -eq "1" ] && {
-			uci set netmode.setup.repeaterready=0
-			uci commit netmode
-			local pid="$(ps | grep wificontro[l] | awk '/repeater/ {print $1}')"
-			[ "$pid" != "" ] && kill -9 $pid
-			pid="$(pidof netmode-client-detect)"
-			[ "$pid" == "" ] && /sbin/netmode-client-detect &
-
-			# set default JUCI page to overview
-			uci -q set juci.juci.homepage="overview"
-			uci commit juci
-		}
-	fi
-}
-
-case "$(uci -q get netmode.setup.curmode)" in
-		repeater*) test_ip ;;
-		*) [ "$repeaterready" == "1" ] && test_ip 1;;
-esac
-
--- a/inteno-netmodes/files/etc/hotplug.d/iface/70-shiftrange
+++ b/inteno-netmodes/files/etc/hotplug.d/iface/70-shiftrange
@@ -1,251 +0,0 @@
-#!/bin/sh
-# this scripts shifts the lan network prefixes
-# if a wan interface has the same network prefix.
-
-. /lib/functions.sh
-. /lib/functions/network.sh
-
-local lockfile="/tmp/70-shiftrange.lock"
-local restricted_nets=""
-local all_nets=""
-
-
-#####
-##### initial functions
-#####
-
-initial_check()
-{
-	# run only on ifup
-	[ "$ACTION" == "ifup" ] || exit 0
-
-	# run only for uplink (not is_lan) interfaces
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" != "1" ] || exit 0
-
-	# run only if the uplink interface has a configured protocol
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" != "none" ] || exit 0
-}
-
-finish()
-{
-    lock -u $lockfile
-    rm -f $lockfile
-}
-
-# just one instance of this script at a time
-just_one_instance()
-{
-	local counter=0
-	local limit=10
-
-	#wait for the lock to become free
-	while [ -e $lockfile ] ; do
-		sleep 1
-		counter=$((counter + 1))
-		[ "$counter" -gt "$limit" ] && exit 1
-	done
-
-	lock $lockfile
-	trap finish EXIT INT TERM
-}
-
-
-#####
-##### helper functions
-#####
-
-#given a an ip and a mask in the form of "192.168.1.1/24"
-#return the network address like "192.168.1.0/24"
-get_network_address()
-{
-	local ip="$1"
-	[ -z "$ip" ] && return
-
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local mask=$((0xFFFFFFFF >> (32 - $prefix) << (32 - $prefix)))
-	local network=$(($ip & $mask))
-
-	local n1=$((($network & 0xFF000000) >> 24))
-	local n2=$((($network & 0x00FF0000) >> 16))
-	local n3=$((($network & 0x0000FF00) >> 8))
-	local n4=$(( $network & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4/$prefix"
-}
-
-#given a network address (192.168.1.0/24)
-#find the next network address (192.168.2.0/24)
-next_network_address()
-{
-	local ip=$1
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local one=$((1 << (32-$prefix)))
-	local new=$(($ip + $one))
-
-	local n1=$((($new & 0xFF000000) >> 24))
-	local n2=$((($new & 0x00FF0000) >> 16))
-	local n3=$((($new & 0x0000FF00) >> 8))
-	local n4=$(( $new & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4/$prefix"
-}
-
-# given a network address and a prefix (192.168.2.0/24)
-# return the first host ip available   (192.168.2.1)
-first_host_in_network ()
-{
-	local ip=$1
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local new=$(($ip + 1))
-
-	local n1=$((($new & 0xFF000000) >> 24))
-	local n2=$((($new & 0x00FF0000) >> 16))
-	local n3=$((($new & 0x0000FF00) >> 8))
-	local n4=$(( $new & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4"
-}
-
-# given a network address,
-# find the next available network address.
-shift_range()
-{
-	local net="$1"
-	while true ; do
-		if [ "$restricted_nets" == "${restricted_nets//$net/}" ] && [ "$all_nets" == "${all_nets//$net/}" ]; then
-			# found a net that is not in restricted nets nor in all nets
-			break
-		fi
-		net=$(next_network_address $net)
-	done
-
-	echo "$net"
-}
-
-
-#####
-##### parse all interfaces section
-#####
-
-# restricted_nets = all the IPs on wan interfaces
-# all_nets = all the IPs on any interface
-parse_interface()
-{
-	local interface=$1
-	local nets=""		# "192.168.1.1/24"
-	local networks=""	# "192.168.1.0/24"
-
-	config_get is_lan $interface is_lan
-	network_get_subnets nets $interface
-
-	for n in $nets ; do
-		networks="$networks $(get_network_address $n)"
-	done
-
-	[ "$is_lan" != "1" ] && restricted_nets="$restricted_nets $networks"
-	all_nets="$all_nets $networks"
-}
-
-# parse all the interfaces
-# get all the IPs on wan interfaces and store them in restrict_nets
-# get all the IPs on all interfaces and store them in all_nets
-parse_interfaces()
-{
-	config_foreach parse_interface "interface"
-}
-
-
-#####
-##### parse all lan interfaces section
-#####
-
-parse_lan()
-{
-	local interface=$1
-	local nets=""
-	local ips=""
-	local newips=""
-	local ips_changed=0
-
-	[ "$interface" == "loopback" ] && return
-	config_get is_lan $interface is_lan
-	[ "$is_lan" == "1" ] || return
-
-	network_get_subnets ips $interface
-
-	for ip in $ips ; do
-		net="$(get_network_address $ip)"
-
-		if [ "$restricted_nets" == "${restricted_nets//$net/}" ] ; then
-			# net is not in restricted nets
-			# append ip to newips
-			[ -z "$newips" ] && newips="${ip%/*}" ||  newips="$newips ${ip%/*}"
-			continue
-		fi
-
-		#net is in restricted_nets
-		local newnet=$(shift_range $net)
-		local newip="$(first_host_in_network $newnet)"
-		# append newip to newips
-		[ -z "$newips" ] && newips="$newip" ||  newips="$newips $newip"
-
-		ips_changed=1
-		logger "$0: Changing the ip on interface $interface from $ip to $newip/${newnet##*/}"
-		echo "$0: Changing the ip on interface $interface from $ip to $newip/${newnet##*/}" >/dev/console
-	done
-
-	#assign the new ips
-	if [ "$ips_changed" == "1" ] ; then
-		uci -q set network.$interface.ipaddr="$newips"
-	fi
-}
-
-# parse all the interface with is_lan=1
-parse_lans()
-{
-	config_foreach parse_lan "interface"
-}
-
-
-#####
-##### main
-#####
-
-main()
-{
-	initial_check
-	just_one_instance
-
-	config_load network
-	parse_interfaces
-	parse_lans
-
-	if [ -n "$(uci changes network)" ] ; then
-		ubus call uci commit '{"config":"network"}'
-	fi
-}
-
-main $@
--- a/inteno-netmodes/files/etc/hotplug.d/net/80-repeater
+++ b/inteno-netmodes/files/etc/hotplug.d/net/80-repeater
@@ -1,102 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-include /lib/network
-
-ps | grep hotplug | grep button && exit
-
-MTK=0
-[ "$(db -q get hw.board.hardware)" == "EX400" ] && MTK=1
-
-WANDEV="$(uci get layer2_interface_ethernet.Wan.ifname)"
-[ $MTK -eq 1 ] && WANDEV="eth0.2"
-
-[ "$INTERFACE" != "$WANDEV" ] && exit
-
-defroute=$(ip route | grep default | awk '{print$3}')
-
-case "$(uci get netmode.setup.curmode)" in
-		repeater*)
-			echo "Preparing to switch mode"
-		;;
-		*)
-			ping -c 1 -w 5 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-			exit
-		;;
-esac
-
-get_wifi_wet_interface() {
-	handle_interface() {
-		config_get mode "$1" mode
-		if [ "$mode" == "sta" -o "$mode" == "wet" ] ; then
-			config_get ifname "$1" ifname
-			echo "$ifname"
-		fi
-	}
-	config_load wireless
-	config_foreach handle_interface wifi-iface
-}
-
-get_wifi_iface_cfgstr() {
-	get_cfgno() {
-		config_get ifname "$1" ifname
-		[ "$ifname" == "$2" ] && echo "wireless.$1"
-	}
-	config_load wireless
-	config_foreach get_cfgno wifi-iface $1
-}
-
-link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
-[ $MTK -eq 1 ] && link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
-
-case "$ACTION" in
-	add|register)
-		[ "$link" == "down" ] && return
-		ubus call leds set  '{"state" : "allflash"}'
-		echo "Autoswitch to Extender mode" > /dev/console
-		sleep 2
-		wetif="$(get_wifi_wet_interface)"
-		# remove wifi client interface
-		case "$(uci get netmode.setup.curmode)" in
-			repeater*)
-				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=1
-			;;
-		esac
-		uci commit wireless
-		#add wan ethernet port
-		uci set network.wan.ifname="$(echo $WANDEV $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$wetif //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-		uci commit network
-		ubus call network reload
-		[ -f /usr/sbin/wlctl ] && wlctl -i $wetif bss down 2>/dev/null
-		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-		ubus call router.network reload
-		ubus call leds set  '{"state" : "normal"}'
-	;;
-	remove|unregister)
-		[ "$link" == "up" ] && return
-		ubus call leds set  '{"state" : "allflash"}'
-		echo "Autoswitch to Repeater mode" > /dev/console
-		sleep 2
-		wetif="$(get_wifi_wet_interface)"
-		# add wifi client interface
-		case "$(uci get netmode.setup.curmode)" in
-			repeater*)
-				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=0
-			;;
-		esac
-		uci commit wireless
-		#remove wan ethernet port
-		uci set network.wan.ifname="$(echo $wetif $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$WANDEV //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-		uci commit network
-		ubus call network reload
-		[ -f /usr/sbin/wlctl ] && wlctl -i $wetif bss up 2>/dev/null
-		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || {
-			killall -9 wifi
-			wifi reload nodat
-			killall -USR1 udhcpc
-		}
-		ubus call router.network reload
-		ubus call leds set  '{"state" : "normal"}'
-	;;
-esac
-
--- a/inteno-netmodes/files/etc/init.d/netmode
+++ b/inteno-netmodes/files/etc/init.d/netmode
@@ -1,327 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=10
-USE_PROCD=1
-
-TMPDIR=/var/netmodes
-OLD_MODE_FILE=/var/netmodes/old_mode
-
-. /usr/share/libubox/jshn.sh
-. /lib/network/config.sh
-
-local modedir=$(uci -q get netmode.setup.dir)
-[ -n "$modedir" ] || modedir="/etc/netmodes"
-
-get_device() {
-	local PORT_NAMES=$(db get hw.board.ethernetPortNames)
-	local PORT_ORDER=$(db get hw.board.ethernetPortOrder)
-        local cnt=1
-        local idx=0
-
-	local pnum=$(echo $PORT_NAMES | wc -w)
-
-	if [ $pnum -le 2 ]; then
-		PORT_NAMES=$(echo $PORT_NAMES | sed 's/LAN/LAN1/g')
-	fi
-
-	# get index of interface name
-	for i in $PORT_NAMES; do
-		if [ "$i" == "$1" ]; then
-			idx=$cnt
-		fi
-		cnt=$((cnt+1))
-	done
-
-        # get port name from index
-	cnt=1
-	for i in $PORT_ORDER; do
-		if [ "$cnt" == "$idx" ]; then
-			echo $i
-		fi
-		cnt=$((cnt+1))
-	done
-}
-
-populate_netmodes() {
-	[ -f /etc/config/netmode -a -d $modedir ] || return
-	local curmode
-
-	config_load netmode
-
-	config_get curmode setup curmode
-
-	mkdir -p $TMPDIR
-
-	if [ "$curmode" == "routed" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="routed_mtk"
-		else
-			curmode="routed_brcm"
-		fi
-	fi
-
-	echo $curmode > $OLD_MODE_FILE
-
-	delete_netmode() {
-		uci delete netmode.$1
-	}
-
-	config_foreach delete_netmode netmode
-	uci commit netmode
-
-	wan=$(get_device WAN)
-	lan1=$(get_device LAN1)
-	lan2=$(get_device LAN2)
-	lan3=$(get_device LAN3)
-	lan4=$(get_device LAN4)
-	lan5=$(get_device LAN5)
-
-	for file in $(find $modedir -type f); do
-		conf="$(echo $file | cut -d'/' -f5)"
-		if [ "$conf" == "layer2_interface_ethernet" ]; then
-			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-		fi
-		if [ "$conf" == "network" ]; then
-			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-			grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
-			grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
-			grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
-			grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
-
-			ifname="$(uci -q get $file.wan.ifname | sed 's/[ \t]*$//')"
-			uci -q set $file.wan.ifname="$ifname"
-			uci -q commit $file
-		fi
-	done
-
-	local hardware=$(db get hw.board.hardware)
-	local keys lang desc exp exclude
-	for mode in $(ls $modedir); do
-
-			case "$mode" in
-				repeater*)
-					wlctl -i wl1 ap >/dev/null 2>&1 || ifconfig rai0 2>/dev/null | grep -q rai0 || continue
-				;;
-			esac
-
-			lang=""
-			desc=""
-			exp=""
-			uci -q set netmode.$mode=netmode
-			json_load "$(cat $modedir/$mode/DETAILS)"
-
-			if json_select excluded_boards; then
-				exclude=0
-				_i=1
-				while json_get_var board $_i; do
-					case "$hardware" in
-						$board)
-							uci -q delete netmode.$mode
-							exclude=1
-							break
-						;;
-					esac
-					_i=$((_i+1))
-				done
-				json_select ..
-				[ $exclude -eq 1 ] && continue
-			fi
-
-			if json_select acl; then
-				_i=1
-				while json_get_var user $_i; do
-					uci add_list netmode.$mode._access_r="$user"
-					_i=$((_i+1))
-				done
-				json_select ..
-			fi
-
-			json_select description
-			json_get_keys keys
-			for k in $keys; do
-				json_get_keys lang $k
-				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
-				json_select $k
-				json_get_var desc $lang
-				uci -q set netmode.$mode."desc_$lang"="$desc"
-				[ "$lang" == "en" ] && uci -q set netmode.$mode."desc"="$desc"
-				json_select ..
-			done
-			json_select ..
-
-			json_select explanation
-			json_get_keys keys
-			for k in $keys; do
-				json_get_keys lang $k
-				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
-				json_select $k
-				json_get_var exp $lang
-				uci -q set netmode.$mode."exp_$lang"="$exp"
-				[ "$lang" == "en" ] && uci -q set netmode.$mode."exp"="$exp"
-				json_select ..
-			done
-			json_select ..
-
-			json_get_var cred credentials
-			uci -q set netmode.$mode.askcred="$cred"
-			json_get_var ulb uplink_band
-			uci -q set netmode.$mode.uplink_band="$ulb"
-			json_get_var reboot reboot
-			uci -q set netmode.$mode.reboot="$reboot"
-	done
-
-	config_get curmode setup curmode
-	[ -d /etc/netmodes/$curmode ] || {
-		[ "$(db -q get hw.board.hardware)" == "EX400" ] && uci -q set netmode.setup.curmode="routed_mtk" || uci -q set netmode.setup.curmode="routed_brcm"
-	}
-
-	uci commit netmode
-}
-
-switch_netmode() {
-	[ -f /etc/config/netmode -a -d $modedir ] || return
-
-	local netreload="$1"
-	local curmode conf repeaterready old_mode
-
-	config_load netmode
-
-	config_get curmode setup curmode
-
-	config_get repeaterready setup repeaterready "0"
-	if [ "$repeaterready" == "1" ] ; then
-		uci -q set netmode.setup.repeaterready="0"
-		uci commit netmode
-	fi
-
-	if [ "$curmode" == "repeater" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="repeater_mtk_5g_up_dual_down"
-		else
-			curmode="repeater_brcm_2g_up_dual_down"
-		fi
-		uci set netmode.setup.curmode="$curmode"
-		uci commit netmode
-	fi
-	if [ "$curmode" == "routed" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="routed_mtk"
-		else
-			curmode="routed_brcm"
-		fi
-		uci set netmode.setup.curmode="$curmode"
-		uci commit netmode
-	fi
-
-	old_mode=`cat $OLD_MODE_FILE 2>/dev/null`
-
-        # if curmode has not changed do not copy configs
-        if [ "$curmode" == "$old_mode" ]; then
-                /etc/init.d/enviroment reload
-                return
-        fi
-
-        echo $curmode >$OLD_MODE_FILE
-
-	[ -d "/etc/netmodes/$curmode" ] || return
-	cp /etc/netmodes/$curmode/* /etc/config/
-	rm -f /etc/config/DETAILS
-	sync
-	local reboot=$(uci -q get netmode.$curmode.reboot)
-	local askcred=$(uci -q get netmode.$curmode.askcred)
-	if [ "$reboot" == "0" ]; then
-		/etc/init.d/enviroment reload
-		case "$curmode" in
-			routed*)
-				ubus call uci commit '{"config":"network"}'
-			;;
-			repeater*)
-				if [ -f /etc/init.d/omcproxy ]; then
-					/etc/init.d/omcproxy stop
-				fi
-				if [ "$netreload" != "0" ]; then
-					ubus call uci commit '{"config":"network"}'
-				fi
-			;;
-		esac
-	else
-		reboot &
-	fi
-}
-
-start_client_listener() {
-	local curmode repeaterready ulcpid
-
-	config_load netmode
-	config_get repeaterready setup repeaterready 0
-
-	ulcpid=$(ps | grep "ubus listen client" | grep -v grep | awk '{print$1}')
-
-	[ $repeaterready -eq 1 ] && {
-		killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-		kill -9 $ulcpid >/dev/null 2>&1
-		return
-	}
-
-	config_get curmode setup curmode
-
-	case "$curmode" in
-		repeater*)
-			killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-			kill -9 $ulcpid >/dev/null 2>&1
-		;;
-		*)
-			pidof netmode-client-detect || /sbin/netmode-client-detect &
-		;;
-	esac
-}
-
-start_netmode_discover() {
-	local curmode repeaterready
-
-	killall -9 netmode-discover >/dev/null 2>&1
-
-	config_load netmode
-	config_get repeaterready setup repeaterready 0
-
-	[ $repeaterready -eq 1 ] && return
-
-	config_get curmode setup curmode
-
-	case "$curmode" in
-		repeater*)
-			/sbin/netmode-discover &
-		;;
-	esac
-}
-
-start_service() {
-	populate_netmodes
-	start_client_listener
-	start_netmode_discover
-}
-
-reload_service() {
-        switch_netmode "$1"
-
-	# set default JUCI page to overview
-	uci -q set juci.juci.homepage="overview"
-	uci commit juci
-
-	start_client_listener
-	start_netmode_discover
-}
-
-stop_service() {
-	killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-	killall -9 netmode-discover >/dev/null 2>&1
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger netmode
-}
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/bridged/DETAILS
@@ -1,21 +0,0 @@
-{
-	"description": [
-		{ "en" : "Bridged IPTV" },
-		{ "sv" : "Brygg IPTV" }
-	],
-	"explanation": [
-		{ "en" : "LAN4 port is bridged with IPTV VLAN" },
-		{ "sv" : "LAN4 port överbryggas med IPTV VLAN" }
-	],
-	"credentials" : 0,
-	"excluded_boards" : [
-		"CG300",
-		"CG301",
-		"EX400"
-	],
-	"acl" : [
-		"admin",
-		"support"
-	]
-}
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/dhcp
+++ b/inteno-netmodes/files/etc/netmodes/bridged/dhcp
@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/firewall
+++ b/inteno-netmodes/files/etc/netmodes/bridged/firewall
@@ -1,117 +0,0 @@
-config settings 'settings'
-        option disabled '0'
-
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	list   network		'iptv'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-	option hidden		1
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for SIP and RTP traffic
-config include
-	option path /etc/firewall.sip
-	option reload 1
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/mcpd
+++ b/inteno-netmodes/files/etc/netmodes/bridged/mcpd
@@ -1,18 +0,0 @@
-
-config mcpd 'mcpd'
-	option igmp_query_response_interval '10'
-	option igmp_last_member_query_interval '10'
-	option igmp_robustness_value '2'
-	option igmp_lan_to_lan_multicast '0'
-	option igmp_max_groups '25'
-	option igmp_max_sources '10'
-	option igmp_max_members '25'
-	option igmp_fast_leave '1'
-	option igmp_join_immediate '0'
-	option igmp_proxy_enable '0'
-	option igmp_snooping_enable '2'
-	option igmp_snooping_interfaces 'br-iptv'
-	option igmp_default_version '2'
-	option igmp_query_interval '120'
-	option igmp_proxy_interfaces 'iptv'
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/network
+++ b/inteno-netmodes/files/etc/netmodes/bridged/network
@@ -1,37 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3'
-	option ip6assign '60'
-	
-config interface 'wan'
-	option type 'anywan'
-	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
-
-config interface 'iptv'
-	option type 'bridge'
-	option proto 'dhcp'
-	option gateway '0.0.0.0'
-	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
-	option defaultroute '0'
-
-config interface 'wan6'
-	option proto 'dhcpv6'
-	option ifname '@wan'
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/wireless
+++ b/inteno-netmodes/files/etc/netmodes/bridged/wireless
@@ -1,93 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'mixed-psk'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS
@@ -1,22 +0,0 @@
-{
-	"description": [
-		{ "en" : "VoIP + Bridged IPTV" },
-		{ "sv" : "VoIP + Brygg IPTV" }
-	],
-	"explanation": [
-		{ "en" : "VoIP on dedicated VLAN + LAN4 port is bridged with IPTV VLAN" },
-		{ "sv" : "VoIP on dedicated VLAN + LAN4 port överbryggas med IPTV VLAN" }
-	],
-	"credentials" : 0,
-	"excluded_boards" : [
-		"CG300",
-		"CG301",
-		"EX400",
-		"F*"
-	],
-	"acl" : [
-		"admin",
-		"support"
-	]
-}
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/dhcp
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/dhcp
@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/firewall
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/firewall
@@ -1,117 +0,0 @@
-config settings 'settings'
-        option disabled '0'
-
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	list   network		'iptv'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-	option hidden		1
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for SIP and RTP traffic
-config include
-	option path /etc/firewall.sip
-	option reload 1
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/mcpd
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/mcpd
@@ -1,18 +0,0 @@
-
-config mcpd 'mcpd'
-	option igmp_query_response_interval '10'
-	option igmp_last_member_query_interval '10'
-	option igmp_robustness_value '2'
-	option igmp_lan_to_lan_multicast '0'
-	option igmp_max_groups '25'
-	option igmp_max_sources '10'
-	option igmp_max_members '25'
-	option igmp_fast_leave '1'
-	option igmp_join_immediate '0'
-	option igmp_proxy_enable '0'
-	option igmp_snooping_enable '2'
-	option igmp_snooping_interfaces 'br-iptv'
-	option igmp_default_version '2'
-	option igmp_query_interval '120'
-	option igmp_proxy_interfaces 'iptv'
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/network
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/network
@@ -1,45 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3'
-	option ip6assign '60'
-	
-config interface 'wan'
-	option type 'anywan'
-	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
-
-config interface 'iptv'
-	option type 'bridge'
-	option proto 'dhcp'
-	option gateway '0.0.0.0'
-	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
-	option defaultroute '0'
-
-config interface 'voip'
-	option type 'anywan'
-	option proto 'dhcp'
-	option gateway '0.0.0.0'
-	option reqopts 'staticroutes'
-	option ifname 'ptm0.200 atm2.1 $WAN.200'
-	option defaultroute '0'
-
-config interface 'wan6'
-	option proto 'dhcpv6'
-	option ifname '@wan'
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless
@@ -1,93 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'mixed-psk'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/DETAILS
@@ -1,20 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾5" },
-		{ "sv" : "Repeater 2.4▴▾5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 5G" }
-	],
-	"excluded_boards" : [
-		"DG15*",
-		"DG40*",
-		"EG40*",
-		"EX40*",
-		"F*"
-	],
-	"uplink_band" : "b",
-	"credentials" : 1,
-	"reboot" : 0
-}
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_adsl
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_adsl
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_ethernet
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_ethernet
@@ -1,6 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-	option bridge '1'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_vdsl
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_vdsl
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_vlan
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_vlan
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/network
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/network
@@ -1,15 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'wan'
-	option type 'bridge'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
-	option reqopts '43'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/owsd
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/owsd
@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/wireless
@@ -1,93 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode '11ac'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-	option apsta '1'
-
-config wifi-iface
-	option device 'wl1'
-	option ifname 'wl1'
-	option network 'wan'
-	option mode 'wet'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option wps_pbc '0'
-	option wmf_bss_enable '1'
-	option autoconf '1'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/DETAILS
@@ -1,20 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾2.4&5" },
-		{ "sv" : "Repeater 2.4▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"DG15*",
-		"DG40*",
-		"EG40*",
-		"EX40*",
-		"F*"
-	],
-	"uplink_band" : "b",
-	"credentials" : 1,
-	"reboot" : 0
-}
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_adsl
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_adsl
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_ethernet
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_ethernet
@@ -1,6 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-	option bridge '1'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_vdsl
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_vdsl
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_vlan
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_vlan
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/network
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/network
@@ -1,15 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'wan'
-	option type 'bridge'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
-	option reqopts '43'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/owsd
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/owsd
@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/wireless
@@ -1,108 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode '11ac'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-	option apsta '1'
-
-config wifi-iface
-	option device 'wl1'
-	option ifname 'wl1'
-	option network 'wan'
-	option mode 'wet'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option wps_pbc '0'
-	option wmf_bss_enable '1'
-	option autoconf '1'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/DETAILS
@@ -1,17 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾2.4&5" },
-		{ "sv" : "Repeater 2.4▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"*G*",
-		"F*"
-	],
-	"uplink_band" : 'b',
-	"credentials" : 1,
-	"reboot" : 0
-}
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/network
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/network
@@ -1,41 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-
-config interface 'wan'
-	option type 'bridge'
-	option ifname 'eth0.2 eth0.1'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option reqopts '66 67 128 224'
-	option igmp_snooping '0'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/omcproxy
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/omcproxy
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/owsd
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/owsd
@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/wireless
@@ -1,59 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  auto
-	option bandwidth '20'
-	option hwmode   auto
-	option htmode   HT20
-	option country 'DE'
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	ra0
-	option wps_pbc	1
-
-config wifi-device  rai0
-	option band a
-	option channel  auto
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 1
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	rai0
-	option wps_pbc	1
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     wet
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	apcli0
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS
@@ -1,17 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 5▴▾2.4&5" },
-		{ "sv" : "Repeater 5▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 5G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 5G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"*G*",
-		"F*"
-	],
-	"uplink_band" : 'a',
-	"credentials" : 1,
-	"reboot" : 0
-}
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/network
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/network
@@ -1,41 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-
-config interface 'wan'
-	option type 'bridge'
-	option ifname 'eth0.2 eth0.1'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option reqopts '66 67 128 224'
-	option igmp_snooping '0'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/omcproxy
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/omcproxy
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/owsd
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/owsd
@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless
@@ -1,59 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  auto
-	option bandwidth '20'
-	option hwmode   auto
-	option htmode   HT20
-	option country 'DE'
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	ra0
-	option wps_pbc	1
-
-config wifi-device  rai0
-	option band a
-	option channel  auto
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 1
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	rai0
-	option wps_pbc	1
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     wet
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	apclii0
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/DETAILS
@@ -1,15 +0,0 @@
-{
-	"description": [
-		{ "en" : "Fully Routed (NAT)" },
-		{ "sv" : "Fullt Omdirigerad (NAT)" }
-	],
-	"explanation": [
-		{ "en" : "" },
-		{ "sv" : "" }
-	],
-	"excluded_boards" : [
-		"EX4*"
-	],
-	"credentials" : 0
-}
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/dhcp
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/dhcp
@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/firewall
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/firewall
@@ -1,153 +0,0 @@
-config settings 'settings'
-        option disabled '0'
-
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-
-config rule
-	option name		Allow-IGMP
-	option src		wan
-	option proto		igmp
-	option family		ipv4
-	option target		ACCEPT
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-
-config rule
-	option name		Allow-MLD
-	option src		wan
-	option proto		icmp
-	option src_ip		fe80::/10
-	list icmp_type		'130/0'
-	list icmp_type		'131/0'
-	list icmp_type		'132/0'
-	list icmp_type		'143/0'
-	option family		ipv6
-	option target		ACCEPT
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto	icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-
-# allow IPsec/ESP and ISAKMP passthrough
-config rule
-	option src		wan
-	option dest		lan
-	option proto		esp
-	option target		ACCEPT
-
-config rule
-	option src		wan
-	option dest		lan
-	option dest_port	500
-	option proto		udp
-	option target		ACCEPT
-
-config dmz dmz
-	option enabled '0'
-	option exclude_ports '5060 7547'
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for prioritizing some specific packets
-config include
-	option path /etc/firewall.qos
-	option reload 1
-
-# include a file with rules for DMZ Host
-config include dmzhost
-	option path /etc/firewall.dmz
-	option reload 1
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_adsl
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_adsl
@@ -1,13 +0,0 @@
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '0'
-        option ifname 'atm0.1'
-        option baseifname 'atm0'
-        option atmtype 'ubr'
-        option name 'atm_inet'
-        option vpi '8'
-        option vci '35'
-
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_ethernet
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_ethernet
@@ -1,5 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_vdsl
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_vdsl
@@ -1,9 +0,0 @@
-config vdsl_interface
-	option unit '0'
-	option ifname 'ptm0.1'
-	option baseifname 'ptm0'
-	option name 'VDSL2'
-	option dslat '1'
-	option ptmprio '1'
-	option ipqos '1'
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_vlan
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_vlan
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/mcpd
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/mcpd
@@ -1,14 +0,0 @@
-config mcpd 'mcpd'
-	option igmp_proxy_interfaces 'wan'
-	option igmp_default_version '2'
-	option igmp_query_interval '125'
-	option igmp_query_response_interval '100'
-	option igmp_last_member_query_interval '10'
-	option igmp_robustness_value '2'
-	option igmp_max_groups '25'
-	option igmp_max_sources '10'
-	option igmp_max_members '25'
-	option igmp_fast_leave '1'
-	option igmp_proxy_enable '1'
-	option igmp_snooping_enable '2'
-	option igmp_snooping_interfaces 'br-lan'
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/network
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/network
@@ -1,29 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
-	option ip6assign '60'
-	
-config interface 'wan'
-	option type 'anywan'
-	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
-
-config interface 'wan6'
-	option proto 'dhcpv6'
-	option ifname '@wan'
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/wireless
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/wireless
@@ -1,93 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'mixed-psk'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/DETAILS
@@ -1,17 +0,0 @@
-{
-	"description": [
-		{ "en" : "Fully Routed (NAT)" },
-		{ "sv" : "Fullt Omdirigerad (NAT)" }
-	],
-	"explanation": [
-		{ "en" : "" },
-		{ "sv" : "" }
-	],
-	"excluded_boards" : [
-		"*G*",
-		"F*"
-	],
-	"reboot" : 0,
-	"credentials" : 0
-}
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/dhcp
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/dhcp
@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/firewall
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/firewall
@@ -1,153 +0,0 @@
-config settings 'settings'
-        option disabled '0'
-
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-
-config rule
-	option name		Allow-IGMP
-	option src		wan
-	option proto		igmp
-	option family		ipv4
-	option target		ACCEPT
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-
-config rule
-	option name		Allow-MLD
-	option src		wan
-	option proto		icmp
-	option src_ip		fe80::/10
-	list icmp_type		'130/0'
-	list icmp_type		'131/0'
-	list icmp_type		'132/0'
-	list icmp_type		'143/0'
-	option family		ipv6
-	option target		ACCEPT
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto	icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-
-# allow IPsec/ESP and ISAKMP passthrough
-config rule
-	option src		wan
-	option dest		lan
-	option proto		esp
-	option target		ACCEPT
-
-config rule
-	option src		wan
-	option dest		lan
-	option dest_port	500
-	option proto		udp
-	option target		ACCEPT
-
-config dmz dmz
-	option enabled '0'
-	option exclude_ports '5060 7547'
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for prioritizing some specific packets
-config include
-	option path /etc/firewall.qos
-	option reload 1
-
-# include a file with rules for DMZ Host
-config include dmzhost
-	option path /etc/firewall.dmz
-	option reload 1
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/network
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/network
@@ -1,47 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option type 'bridge'
-	option proto 'static'
-	option is_lan '1'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ip6assign '60'
-	option ifname 'eth0.1 ra0 rai0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-
-config interface 'wan'
-	option ifname 'eth0.2'
-	option proto 'dhcp'
-	option reqopts '66 67 128 224'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/omcproxy
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/omcproxy
@@ -1,10 +0,0 @@
-config proxy
-	option scope global
-	option uplink wan
-	list downlink lan
-
-config proxy
-	option scope global
-	option uplink wan6
-	list downlink lan
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/wireless
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/wireless
@@ -1,48 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  auto
-	option bandwidth '20'
-	option hwmode   auto
-	option htmode   HT20
-	option country 'DE'
-
-config wifi-iface
-	option device   ra0
-	option network  lan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option wps_pbc	1
-
-config wifi-device  rai0
-	option band a
-	option channel  auto
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 1
-
-config wifi-iface
-	option device   rai0
-	option network  lan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option wps_pbc	1
-
--- a/inteno-netmodes/files/sbin/netmode-client-detect
+++ b/inteno-netmodes/files/sbin/netmode-client-detect
@@ -1,56 +0,0 @@
-#!/bin/sh
-
-# receive new client events
-# and trigger wificontrol in --router mode for that client
-
-. /usr/share/libubox/jshn.sh
-
-local action ipaddr macaddr network
-
-timed_check() {
-	while true; do
-		network=${network:-lan}
-		ubus call repeater get_creds '{"network":"'$network'","file":"/tmp/wificontrol.txt"}'
-		wificontrol --router
-		sleep $1
-	done
-}
-
-is_inteno_macaddr()
-{
-	macaddr=$1
-
-	echo $macaddr | grep -i -e "^00:22:07" \
-				-e "^02:22:07" \
-				-e "^44:D4:37" \
-				-e "^00:0C:07" \
-				-e "^02:0C:07" \
-				-e "^06:0C:07" \
-				-e "^00:0C:43" \
-				-e "^02:0C:43" \
-				-e "^06:0C:43" \
-	&& return
-	false
-}
-
-timed_check 60 &
-
-while true ; do
-	ubus listen client | \
-	while read event ; do
-		#echo "netmode-client-detect got event: $event" >/dev/console
-		json_load "$event"
-		json_select client
-		json_get_var action action
-		[ "$action" == "connect" ] || continue
-		json_get_var macaddr macaddr
-		json_get_var ipaddr ipaddr
-		json_get_var network network "lan"
-
-		if is_inteno_macaddr $macaddr; then
-			echo "netmode-client-detect: a new Inteno device detected on '$network' network (MACAddr:$macaddr IPAddr:$ipaddr)" >/dev/console
-			ubus call repeater get_creds '{"network":"'$network'","file":"/tmp/wificontrol.txt"}'
-			/sbin/wificontrol --router --destination $ipaddr
-		fi
-	done
-done
--- a/inteno-netmodes/files/sbin/netmode-conf
+++ b/inteno-netmodes/files/sbin/netmode-conf
@@ -1,288 +0,0 @@
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-state="exit"
-TMPPATH="/tmp/netmode_config_backup"
-CURMODE=""
-SLEEPTIME=300
-
-set_wireless_values() {
-	local iface_num="$1"
-	local ssid="$2"
-	local key="$3"
-	local encryption="$4"
-	local device="$5"
-	local old_ssid old_key old_encryption
-	if ! uci -q get wireless.@wifi-iface[$iface_num] >/dev/null 2>&1; then
-		state="reload"
-		uci add wireless wifi-iface >/dev/null 2>&1
-		uci set wireless.@wifi-iface[$iface_num].device="$device"
-	fi
-	local network="$(uci -q get wireless.@wifi-iface[$iface_num].network)"
-	old_ssid="$(uci -q get wireless.@wifi-iface[$iface_num].ssid)"
-	old_key="$(uci -q get wireless.@wifi-iface[$iface_num].key)"
-	old_encryption="$(uci -q get wireless.@wifi-iface[$iface_num].encryption)"
-	if [ "$old_ssid" != "$ssid" -o "$old_encryption" != "$encryption" -o "$old_key" != "$key" -o -z "$network" ]; then
-		#TODO: get network dynamicaly
-		[ "$state" == "exit" ] && state="apply"
-		[ -z "$network" ] && network="wan"
-		uci set wireless.@wifi-iface[$iface_num].network="$network"
-		uci set wireless.@wifi-iface[$iface_num].ssid="$ssid"
-		uci set wireless.@wifi-iface[$iface_num].key="$key"
-		uci set wireless.@wifi-iface[$iface_num].encryption="$encryption"
-	fi
-}
-
-get_wifi_device_from_band(){
-	local section="$1"
-	local band="$2"
-	local __ret="$3"
-	local b
-	config_get b $section "band"
-	if [ "$band" == "$b" ]; then
-		eval "export -- \"$__ret=$section\""
-	fi
-}
-
-get_device(){
-	local band="$1"
-	config_foreach get_wifi_device_from_band "wifi-device" "$band" "$2"
-}
-
-get_iface_num() {
-	local device="$1"
-	local prev="$2"
-	local __save="$3"
-	local i=0
-	local dev
-	while true; do
-		[ $i -gt 100 ] && break ## just a safty messure
-		if ! uci -q get wireless.@wifi-iface[$i] >/dev/null; then
-			break
-		fi
-		mode="$(uci -q get wireless.@wifi-iface[$i].mode)"
-		if [ "$mode" == "wet" -o "$mode" == "sta" ]; then
-			i=$((i+1))
-			continue
-		fi
-		dev="$(uci -q get wireless.@wifi-iface[$i].device)"
-		if [ "$dev" != "$device" ]; then
-			[ -z "$dev" ] && break
-			i=$((i+1))
-		elif [ $prev -ne 0 ]; then
-			i=$((i+1))
-			prev=$((prev-1))
-		else
-			break
-		fi
-	done
-	eval "export -- \"$__save=$i\""
-}
-
-restore() {
-	if [ "$1" == "back" ]; then
-		uci set juci.juci.homepage='netmode-wizard'
-		uci commit juci
-		cp $TMPPATH/* /etc/config/
-		uci set netmode.setup.curmode=$CURMODE
-		uci commit netmode
-		ubus call network reload
-		wifi reload
-		ubus call router.network reload
-	fi
-	rm -r $TMPPATH
-	ubus call leds set '{"state":"normal"}'
-}
-
-backup() {
-	mkdir -p $TMPPATH
-	cp /etc/config/* $TMPPATH/
-	CURMODE="$(uci -q get netmode.setup.curmode)"
-	ubus call leds set '{"state":"allflash"}'
-}
-
-###### START HERE #######
-
-file="$1"
-from_gui="$2"
-
-[ -f "$file" ] || exit
-
-# let netmode-handler up to 20 seconds to finish switching mode
-for tm in 2 4 6 8; do
-	if [ ! -f /tmp/switching_mode ]; then
-		break
-	fi
-	sleep $tm
-done
-
-[ "$from_gui" == "true" ] && backup
-
-json_load "`cat $file`"
-json_select "wifi_ifaces"
-
-local curmode repmode
-config_load netmode
-config_get curmode setup curmode
-
-case $curmode in
-	*repeater*)
-	;;
-	*)
-		uci set netmode.setup.curmode="repeater"
-		uci commit netmode
-		/etc/init.d/netmode reload
-		curmode="$(uci -q get netmode.setup.curmode)"
-	;;
-esac
-
-local apcliband="a"
-case $curmode in
-	*_2g_*) apcliband="b";;
-esac
-
-i=1
-
-local dummy band ssid key encryption device iface_num
-
-while json_get_var dummy $i; do
-	json_select $i
-	json_get_var band band
-	[ "$band" == "" -o "$apcliband" == "$band" ] && break
-	json_select ..
-	i=$((i+1))
-done
-
-[ "$apcliband" == "$band" -o "$band" == "" ] || {
-	[ "$from_gui" == "true" ] && restore "back"
-	exit
-}
-
-repeater_iface_num=$(uci -q show wireless | grep -e ".mode='wet'" -e ".mode='sta'"  | sed 's/.*\[\([0-9]\)\].*/\1/')
-
-[ -z "$repeater_iface_num" ] && {
-	[ "$from_gui" == "true" ] && restore "back"
-	exit
-}
-
-json_get_var ssid ssid
-json_get_var key key
-json_get_var encryption encryption
-
-set_wireless_values "$repeater_iface_num" "$ssid" "$key" "$encryption"
-
-json_load "`cat $file`"
-json_select "wifi_ifaces"
-
-config_load wireless
-local b_num=0
-local a_num=0
-
-i=1
-while json_get_var dummy $i; do
-	json_select $i
-	json_get_var band band
-	json_get_var ssid ssid
-	json_get_var encryption encryption
-	json_get_var key key
-	if [ "$band" == "" ]; then
-		get_device "a" device
-		get_iface_num "$device" "$a_num" iface_num
-		a_num=$((a_num+1))
-		[ -z $iface_num ] && {
-			[ "$from_gui" == "true" ] && restore "back"
-			exit
-		}
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-		get_device "b" device
-                get_iface_num "$device" "$b_num" iface_num
-                b_num=$((b_num+1))
-                [ -z $iface_num ] && {
-                        [ "$from_gui" == "true" ] && restore "back"
-                        exit
-                }
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-	else
-		get_device "$band" device
-		case $band in
-			a)
-				get_iface_num "$device" "$a_num" iface_num
-				a_num=$((a_num+1))
-				;;
-			b)
-				get_iface_num "$device" "$b_num" iface_num
-				b_num=$((b_num+1))
-				;;
-		esac
-		[ -z $iface_num ] && {
-			[ "$from_gui" == "true" ] && restore "back"
-			exit
-		}
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-	fi
-	i=$((i+1))
-	json_select ..
-done
-
-i=$((b_num + a_num + 1))
-
-if [ $repeater_iface_num -gt $i ]; then
-	i=$((i-1))
-fi
-
-while uci -q get wireless.@wifi-iface[$i] >/dev/null; do
-	# if repeater_iface_num is greater than the number of
-	# configured downlink we need to make sure its not deleted
-	local mode="$(uci -q get wireless.@wifi-iface[$i].mode)"
-	if [ "$mode" == "wet" -o "$mode" == "sta" ]; then
-		i=$((i+1))
-		continue
-	fi
-	state="reload"
-	uci -q delete wireless.@wifi-iface[$i] >/dev/null
-	# do not increment i. The next interface will now
-	# have the same index as the deleted interface
-done
-
-uci commit wireless
-
-if [ "$from_gui" == "true" ]; then
-	# check for connectivity
-	wifi reload
-	[ -f /etc/init.d/layer2_interface_ethernet -a -f /etc/config/layer2_interface_ethernet ] && /etc/init.d/layer2_interface_ethernet reload
-	i=$SLEEPTIME;
-
-	while [ $i -gt 0 ]; do
-		ip=`route -n | awk '/^0.0.0.0/{print $2}'`
-		if [ "$ip" == "" ]; then
-			i=$((i-10))
-			sleep 10
-			continue
-		fi
-		ping -w1 $ip
-		if [ $? -eq 0 ]; then
-			restore
-			exit
-		else
-			i=$((i-10))
-			sleep 9
-		fi
-	done
-	restore "back"
-else
-	if [ "$state" == "exit" ]; then
-		return
-	fi
-	ubus call leds set '{"state":"allflash"}'
-	if [ "$state" == "apply" ]; then
-		# wifi apply
-		wifi reload
-	else
-		# wifi reload
-		wifi reload
-	fi
-	[ -f /etc/init.d/layer2_interface_ethernet -a -f /etc/config/layer2_interface_ethernet ] && /etc/init.d/layer2_interface_ethernet reload
-	ubus call leds set '{"state":"normal"}'
-fi
--- a/inteno-netmodes/files/sbin/netmode-discover
+++ b/inteno-netmodes/files/sbin/netmode-discover
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-local unlisted mac ipaddr netmask mask
-
-mask_to_cidr() {
-    nbits=0
-    IFS=.
-    for dec in $1 ; do
-        case $dec in
-            255) let nbits+=8;;
-            254) let nbits+=7;;
-            252) let nbits+=6;;
-            248) let nbits+=5;;
-            240) let nbits+=4;;
-            224) let nbits+=3;;
-            192) let nbits+=2;;
-            128) let nbits+=1;;
-            0);;
-            *) echo "Error: $dec is not recognised"; exit 1
-        esac
-    done
-    echo "$nbits"
-}
-
-while true; do
-	unlisted=0
-
-	ps | grep -q wifi | grep -q reload || {
-		for mac in $(brctl showmacs br-wan 2>/dev/null | tail -n +2 | grep no | awk '{print$2}'); do
-			grep -q "$mac" /proc/net/arp || unlisted=$((unlisted+1))
-		done
-
-		ipaddr=$(ifconfig br-wan | grep -v inet6 | grep inet | tr ':' ' ' | awk '{print$3}')
-		netmask=$(ifconfig br-wan | grep -v inet6 | grep inet | tr ':' ' ' | awk '{print$7}')
-		mask=$(mask_to_cidr $netmask)
-	}
-
-	if [ $unlisted -gt 0 -a -n "$ipaddr" -a -n "$netmask" ]; then
-		fping -c 1 -t 1000 -g $ipaddr/$mask -q >/dev/null 2>&1
-	fi
-
-	sleep 20
-done
-
--- a/inteno-netmodes/files/sbin/netmode-repeater-correction
+++ b/inteno-netmodes/files/sbin/netmode-repeater-correction
@@ -1,19 +0,0 @@
-#!/bin/sh
-
-MTK=0
-[ "$(db -q get hw.board.hardware)" == "EX400" ] && MTK=1
-
-if [ $MTK -eq 1 ]; then
-	WANDEV="eth0.2"
-	link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
-else
-	WANDEV="$(uci get layer2_interface_ethernet.Wan.ifname)"
-	link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
-fi
-
-[ "$link" == "up" ] && action=add
-[ "$link" == "down" ] && action=remove
-[ -z "$action" ] && exit
-
-# trigger a fake hotplug net event
-INTERFACE=$WANDEV ACTION=$action /sbin/hotplug-call net
--- a/inteno-netmodes/files/usr/libexec/rpcd/repeater
+++ b/inteno-netmodes/files/usr/libexec/rpcd/repeater
@@ -1,141 +0,0 @@
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-get_if_creds() {
-	local section=$1
-	local network=$2
-	local net dev ssid key encryption band
-	config_get net $section "network" "lan"
-	if [ "$net" == "$network" ]; then
-		config_get dev $section "device"
-		band="$(uci -q get wireless.$dev.band)"
-		config_get ssid $section ssid
-		config_get key $section key
-		config_get encryption $section encryption
-		config_get disabled $section disabled 0
-		[ $disabled -eq 1 ] && return
-		[ "$ssid" == "" -o "$band" == "" ] && return
-		json_add_object
-		json_add_string "ssid" "$ssid"
-		json_add_string "band" "$band"
-		json_add_string "key" "$key"
-		json_add_string "encryption" "$encryption"
-		json_close_object
-	fi
-}
-
-validate_file() {
-	local file="$1"
-	local real="$(readlink -f `dirname $file`)"
-	real="${real}/`basename $file`"
-	case "$real" in
-		/tmp/*)
-			touch $real && return 0 || return 1
-		;;
-		*)
-			return 1
-		;;
-	esac
-}
-
-write_error(){
-	json_init
-	json_add_string "status" "error: $1"
-	json_dump
-	exit 1
-}
-
-duplicate_if_single_radio() {
-	json_select "wifi-ifaces"
-	local i=1
-	local dummy band dup_band num_radios
-
-	num_radios="$(uci -q show wireless | grep wifi-device | wc -l)"
-
-	[ "$num_radios" == "2" ] && return
-
-	band="$(uci -q get wireless.@wifi-device[0].band)"
-
-	[ "$band" == "a" ] && dup_band="b"
-	[ "$band" == "b" ] && dup_band="a"
-	[ -z "$dup_band" ] && return
-
-
-	while json_get_var dummy $i; do
-		i=$((i+1))
-	done
-	i=$((i-1))
-	local ssid key encryption
-	while [ $i -gt 0 ]; do
-		json_select $i
-		json_get_var ssid ssid
-		json_get_var key key
-		json_get_var encryption encryption
-		json_select ..
-		json_add_object
-		json_add_string "ssid" "$ssid"
-		json_add_string "band" "$dup_band"
-		json_add_string "key" "$key"
-		json_add_string "encryption" "$encryption"
-		json_close_object
-		i=$((i-1))
-	done
-}
-
-case "$1" in
-	list)
-		echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
-	;;
-	call)
-		case "$2" in
-			get_creds)
-				#TODO: if not routed exit
-				local curmode="$(uci -q get netmode.setup.curmode)"
-				case $curmode in
-					*repeater*) write_error "not in repeater mode";;
-				esac
-				local network file input
-				read input
-				json_load $input
-				json_get_var network network
-				json_get_var file file
-
-				json_init
-				json_add_array "wifi-ifaces"
-				config_load wireless
-				config_foreach get_if_creds "wifi-iface" "$network"
-				json_close_array
-
-				duplicate_if_single_radio
-
-				if [ "$file" == "" ]; then
-					json_dump
-				else
-					validate_file $file && json_dump -i >$file || write_error "invalid filename (\"$file\"), file must be in /tmp/ and in an existing directory"
-				fi
-				json_init
-				json_add_string "status" success
-				json_dump
-			;;
-			set_creds)
-				local file from_gui
-				read input
-				json_load "$input"
-				json_get_var file file
-				json_get_var from_gui from_gui
-				validate_file "$file" || write_error "invalid filename (\"$file\"), file must be in /tmp and exist"
-				json_load "`cat $file`" || write_error "invalid file content"
-				json_select "wifi_ifaces" || write_error "invalid file content"
-
-
-				json_init
-				json_add_string "status" success
-				json_dump
-
-				netmode-conf "$file" "$from_gui" >/dev/null 2>&1 &
-			;;
-		esac
-	;;
-esac
--- a/iop/configs/config
+++ b/iop/configs/config
@@ -4,15 +4,15 @@ CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
 CONFIG_LOCALMIRROR="http://mirror.inteno.se/mirror"
+CONFIG_PACKAGE_4g-support=y
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
 CONFIG_PACKAGE_6tunnel=y
 CONFIG_PACKAGE_alsa-lib=y
+CONFIG_PACKAGE_bind-host=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
-CONFIG_PACKAGE_comgt-directip=y
-CONFIG_PACKAGE_comgt-ncm=y
 CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
@@ -31,14 +31,10 @@ CONFIG_PACKAGE_ice-client-monitor=m
 CONFIG_PACKAGE_ice-client-netrounds=m
 CONFIG_PACKAGE_ice-client-rshell=m
 CONFIG_PACKAGE_ice-client-texec=m
+# CONFIG_PACKAGE_icgroupd is not set
 CONFIG_PACKAGE_icwmp-curl=y
-CONFIG_PACKAGE_inteno-netmodes=y
 CONFIG_PACKAGE_iperf-mt=y
 CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_iptables=y
-CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
-CONFIG_PACKAGE_iptables-mod-filter=y
-CONFIG_PACKAGE_iptables-mod-ipopt=y
 CONFIG_PACKAGE_iup=y
 CONFIG_PACKAGE_iwatchdog=y
 CONFIG_PACKAGE_juci=y
@@ -47,7 +43,7 @@ CONFIG_PACKAGE_juci-broadcom-ethernet=y
 CONFIG_PACKAGE_juci-broadcom-iptv=y
 CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
 CONFIG_PACKAGE_juci-broadcom-vlan=y
-CONFIG_PACKAGE_juci-wireless=y
+CONFIG_PACKAGE_juci-broadcom-wl=y
 CONFIG_PACKAGE_juci-broadcom-xdsl=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
@@ -56,12 +52,12 @@ CONFIG_PACKAGE_juci-dropbear=y
 CONFIG_PACKAGE_juci-ethernet=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
-CONFIG_PACKAGE_juci-ice-client=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
 CONFIG_PACKAGE_juci-inteno-backup=y
-CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-inteno-multiwan=y
 CONFIG_PACKAGE_juci-inteno-provisioning=y
+CONFIG_PACKAGE_juci-inteno-router=y
 CONFIG_PACKAGE_juci-inteno-qos=y
 CONFIG_PACKAGE_juci-inteno-voice-client=y
 CONFIG_PACKAGE_juci-macdb=y
@@ -71,9 +67,7 @@ CONFIG_PACKAGE_juci-mod-system=y
 CONFIG_PACKAGE_juci-natalie-dect=y
 CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-netifd=y
-CONFIG_PACKAGE_juci-owsd=y
 CONFIG_PACKAGE_juci-printer=y
-CONFIG_PACKAGE_juci-realtime-graphs=y
 CONFIG_PACKAGE_juci-samba=y
 CONFIG_PACKAGE_juci-simple-gui=y
 CONFIG_PACKAGE_juci-snmpd=y
@@ -87,15 +81,13 @@ CONFIG_PACKAGE_juci-utils=y
 CONFIG_PACKAGE_kmod-nls-base=y
 CONFIG_PACKAGE_kmod-siit=y
 CONFIG_PACKAGE_layer2interface=y
-CONFIG_PACKAGE_libcgroup-daemon=y
-CONFIG_PACKAGE_libcgroup=y
-# CONFIG_PACKAGE_libcgroup-utils is not set
 CONFIG_PACKAGE_ldd=y
+# CONFIG_PACKAGE_libcgroup=y
+# CONFIG_PACKAGE_libcgroup-daemon=y
 CONFIG_PACKAGE_libdaemon=y
 CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
 CONFIG_PACKAGE_libreadline=y
-CONFIG_PACKAGE_loop-detector=m
 CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mtd-utils=y
@@ -103,8 +95,16 @@ CONFIG_PACKAGE_mtd-utils-deubinize=y
 CONFIG_PACKAGE_mtd-utils-imagewrite=y
 CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
 CONFIG_PACKAGE_mtd-utils-nanddump=y
-CONFIG_PACKAGE_mwan3=y
+CONFIG_PACKAGE_mtd-utils-ubiattach=y
+CONFIG_PACKAGE_mtd-utils-ubidetach=y
+CONFIG_PACKAGE_mtd-utils-ubimkvol=y
+CONFIG_PACKAGE_mtd-utils-ubinfo=y
+CONFIG_PACKAGE_mtd-utils-ubirmvol=y
+CONFIG_PACKAGE_mtd-utils-ubirsvol=y
+CONFIG_PACKAGE_mtd-utils-ubiupdatevol=y
+CONFIG_PACKAGE_multiwan=y
 CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_netcheck=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_odhcp6c=y
 CONFIG_PACKAGE_odhcpd=y
@@ -117,14 +117,12 @@ CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
 CONFIG_PACKAGE_ppp-mod-pppol2tp=y
-CONFIG_PACKAGE_ppp-mod-pptp=y
 CONFIG_PACKAGE_ppp-multilink=y
-# CONFIG_PACKAGE_ppp is not set
 CONFIG_PACKAGE_qos-scripts=y
+CONFIG_PACKAGE_qrencode=y
 CONFIG_PACKAGE_questd=y
 CONFIG_PACKAGE_rdisc6=y
 CONFIG_PACKAGE_rdnssd=y
-CONFIG_PACKAGE_relayd=y
 CONFIG_PACKAGE_resolveip=y
 CONFIG_PACKAGE_rpcd=y
 CONFIG_PACKAGE_samba3=y
@@ -136,37 +134,25 @@ CONFIG_PACKAGE_tcpdump=y
 CONFIG_PACKAGE_terminfo=y
 CONFIG_PACKAGE_tptest=y
 CONFIG_PACKAGE_traceroute6=y
-CONFIG_PACKAGE_umbim=y
-CONFIG_PACKAGE_uqmi=y
 CONFIG_PACKAGE_usb-modeswitch=y
 CONFIG_PACKAGE_usbreset=y
-CONFIG_PACKAGE_wget=y
-CONFIG_PACKAGE_wwan=y
 CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_zoneinfo-core=y
 CONFIG_PACKAGE_zoneinfo-europe=y
 CONFIG_TARGET_CUSTOMER="INT"
+CONFIG_TARGET_ROOTFS_JFFS2=y
 CONFIG_TARGET_ROOTFS_TARGZ=y
 # CONFIG_USE_SSTRIP is not set
 CONFIG_USE_STRIP=y
 CONFIG_BUILD_LOG=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
 CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
-CONFIG_BUSYBOX_CONFIG_CTTYHACK=y
 CONFIG_BUSYBOX_CONFIG_DELUSER=y
 # CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
 CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
 CONFIG_BUSYBOX_CONFIG_HTTPD=y
 CONFIG_BUSYBOX_CONFIG_INSMOD=y
-CONFIG_BUSYBOX_CONFIG_MODINFO=y
-CONFIG_BUSYBOX_CONFIG_MODPROBE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODPROBE_BLACKLIST=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
-CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
-CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
 CONFIG_BUSYBOX_CONFIG_LSMOD=y
@@ -175,6 +161,7 @@ CONFIG_BUSYBOX_CONFIG_LSUSB=y
 CONFIG_BUSYBOX_CONFIG_MICROCOM=y
 CONFIG_BUSYBOX_CONFIG_RMMOD=y
 CONFIG_BUSYBOX_CONFIG_STTY=y
+CONFIG_BUSYBOX_CONFIG_TASKSET=y
 CONFIG_BUSYBOX_CONFIG_TFTP=y
 # CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
@@ -198,7 +185,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
 # CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
-# CONFIG_BUSYBOX_CONFIG_WGET is not set
 # CONFIG_BUSYBOX_CONFIG_LOGIN_SCRIPTS is not set
 # CONFIG_BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD is not set
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
@@ -206,6 +192,3 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 CONFIG_LIBCURL_CRYPTO_AUTH=y
 CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_SAMBA3_CONFIG_NO_PRINTING is not set
-# CONFIG_SIGNED_PACKAGES is not set
-CONFIG_KERNEL_DEVTMPFS=y
-CONFIG_KERNEL_DEVTMPFS_MOUNT=y
--- a/iop/iop.completion
+++ b/iop/iop.completion
@@ -1,89 +0,0 @@
-# Bash completion for IOPSYS "./iop" utility
-# Source this file into the curent shell or copy it into
-# /usr/share/bash-completion/completions/ and start a new shell
-# for automatic availability.
-
-_iop_get_profiles()
-{
-    find feeds/feed_inteno_targets/iopsys-*/ -name '*.diff' \
-        |awk -F'/' '{print$NF}' \
-        |awk -F. '{print$1}'
-}
-
-_iop_get_models()
-{
-    find feeds/feed_inteno_targets/iopsys-*/ -mindepth 1 -maxdepth 1 -type d \
-        |awk -F'/' '{print$NF}' \
-        |egrep '^(cg|dg|eg|vg|vox)[0-9]'
-}
-
-_iop_get_model_customers()
-{
-    local model=$1
-    find customerconfigs/$prev -mindepth 1 -maxdepth 1 -type d \
-        |awk -F'/' '{print$NF}'
-}
-
-_iop() 
-{
-    local cur prev iopcmds
-
-    COMPREPLY=()
-    cur="${COMP_WORDS[COMP_CWORD]}"
-    prev="${COMP_WORDS[COMP_CWORD-1]}"
-
-    iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
-             feeds_update genconfig generate_tarballs install_key \
-             scp_changes setup_host ssh_install_key ssh_sysupgrade \
-             ssh_sysupgrade_latest ssh_sysupgrade_latest_w status \
-             update_package"
-
-    if [ $COMP_CWORD -eq 1 ] ; then
-
-        # Complete the primary iop command
-        COMPREPLY=($(compgen -W "${iopcmds}" -- ${cur}))  
-        return 0
-
-    else
-    
-        # Complete the arguments to "iopcmds"
-        local cmd="${COMP_WORDS[1]}"
-        case "$cmd" in
-
-            extract_core)
-                if [ "$prev" == "-e" ] ; then
-                    _filedir -d
-                else
-                    COMPREPLY=( $(compgen -W "-e -h" -- ${cur}) )
-                fi
-                return 0
-                ;;
-
-            genconfig)
-                if [ "$prev" == "-p" ] ; then
-                    local profiles=$(_iop_get_profiles)
-                    COMPREPLY=( $(compgen -W "juci $profiles" -- ${cur}) )
-                elif [[ $cur == -* ]] ; then
-                    COMPREPLY=( $(compgen -W "-c -h -p -s -t -u -v" -- ${cur}) )
-                else
-                    local models=$(_iop_get_models)
-                    if echo $models |grep -qw -- $prev ; then
-                        local customers=$(_iop_get_model_customers $prev)
-                        COMPREPLY=( $(compgen -W "$customers" -- ${cur}) )
-                    else
-                        COMPREPLY=( $(compgen -W "$models" -- ${cur}) )
-                    fi
-                fi
-                return 0
-                ;;
-
-            *)
-                # No arguments or arguments not supported yet
-                ;;
-        esac
-    fi
-}
-
-complete -F _iop ./iop
-complete -F _iop iop
-
--- a/iop/scripts/compile.sh
+++ b/iop/scripts/compile.sh
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-function compile {
-	if [ -z "$1" ]; then
-		echo "Please give a valid package as first argument."
-		return 1
-	fi
-
-	local cpath pck
-	local lpath=$(find package/ -type l -name $1)
-	local dpath=$(find package/ -type d -name $1)
-
-	for pck in $lpath $dpath; do
-		if [ -n "$(ls $pck/Makefile 2>/dev/null)" ]; then
-			cpath=$pck
-			break
-		fi
-	done
-
-	if [ -n "$cpath" ]; then
-		make $cpath/compile V=$2
-	else
-		echo "Package $1 does not exist. Make sure you have installed the necessary feed."
-	fi
-}
-
-register_command "compile" "Compile a specific package: ./iop compile <PACKAGE_NAME> [0-99]; i.e ./iop compile netifd 99"
--- a/iop/scripts/extract_core.sh
+++ b/iop/scripts/extract_core.sh
@@ -1,132 +0,0 @@
-#!/bin/bash
-
-function extract_core {
-	initial_commit=1427738ac4b77f474999ae21af1a8b916468df36
-	patch_dir=extract_core_patches
-	topdir=$(pwd)
-
-	# Paths to packages that should be exported.
-	paths+='package/network/services/base-files '
-	paths+='package/network/services/dnsmasq '
-	paths+='package/network/config/firewall '
-	paths+='package/network/config/netifd '
-	paths+='package/network/config/qos-scripts '
-	paths+='package/system/procd '
-	paths+='package/utils/busybox '
-
-	function print_usage {
-		echo "Usage: $0 extract_core"
-		echo "  -p <path-to-package> | default"
-		echo "  -r <import-repo>"
-		echo "  -b <import-branch>"
-		echo ""
-		echo "Example: $0 extract_core"
-		echo "  -p package/utils/busybox"
-		echo "  -r feeds/feed_inteno_openwrt"
-		echo "  -b devel"
-	}
-
-	function orphan_branch {
-		local branch=$1
-
-		git checkout --orphan $branch
-		git rm -rf --cached *
-		git rm -rf --cached .empty
-		rm -rf *
-		rm -rf .empty
-	}
-
-	function export_core {
-		local path=$1
-
-		echo "Extracting ${path} from core to ${import_repo}:${import_branch}"
-
-		# Generate patches from start of openwrt repo.
-		mkdir -p $patch_dir
-		repo=$(basename $path)
-		dir=$(dirname $path)
-		git format-patch $initial_commit $path -o $patch_dir
-
-		# Remove dirname from patches to commit the packages to the
-		# top directory in the destination repo.
-		ls $patch_dir | while read line; do
-			sdir=$(echo "$dir/" | sed 's/\//\\\//g')
-			sed -i "s/$sdir//g" $patch_dir/$line
-		done
-		
-		cd $import_repo
-		
-		if [ -n "$(git rev-parse -q --verify remotes/origin/$repo)" ]; then
-			# Create temporary branch to apply patches on.
-			# We need to do this as git am does not like it
-			# when patches have already been applied.
-			orphan_branch tmp
-			git am $topdir/$patch_dir/*
-			
-			# Rebase and merge.
-			git rebase origin/$repo
-			git checkout --track -b $repo origin/$repo
-			git merge tmp
-			git br -d tmp
-		else
-			# Remote branch does not exist for packet so create it.
-			orphan_branch $repo
-			git am $topdir/$patch_dir/*
-		fi
-
-		git push origin $repo
-		
-		# Merge the package branch into the main branch.
-		git checkout $import_branch
-		git merge $repo -m "Syncing $repo"
-		git push origin $import_branch
-		git br -d $repo
-		
-		rm -rf $topdir/$patch_dir
-		cd $topdir
-	}
-
-	# Execute user command
-	while getopts "p:r:b:h" opt; do
-		case $opt in
-			p)
-				export_path=${OPTARG}
-				;;
-			r)
-				import_repo=${OPTARG}
-				;;
-			b)
-				import_branch=${OPTARG}
-				;;
-			h)
-				print_usage
-				exit 1
-				;;
-			\?)
-				print_usage
-				exit 1
-				;;
-		esac
-	done
-
-	if [ ! -n "$export_path" ] || [ ! -n "$import_repo" ] || [ ! -n "$import_branch" ]; then
-   		print_usage
-		exit 1
-	fi
-
-	if [ "$export_path" == "default" ]; then
-		echo "Extracting default packages:"
-		for p in $paths; do
-			export_core $p
-
-		done
-	else
-		export_core $export_path
-	fi
-
-	exit 0
-}
-
-register_command "extract_core" "Extract core package to separate feed"
-
-
--- a/iop/scripts/feeds_update.sh
+++ b/iop/scripts/feeds_update.sh
@@ -3,44 +3,48 @@
 function feeds_update {

    developer=0
-    override=1
-    start=$(date -u +'%s');
-    while getopts "n" opt; do
-	case $opt in
-	    n)
-		override=0
-		;;
-	esac
-    done
-

    git remote -v | grep -q http || developer=1

+    #while getopts "d" opt; do
+    #    case $opt in
+    #        d)
+    #	    developer=1
+    #            ;;
+    #        \?)
+    #            echo "Invalid option: -$OPTARG" >&2
+    #            exit 1
+    #            ;;
+    #    esac
+    #done
+
    cp .config .genconfig_config_bak

+    rm -rf package/feeds
+
    #if -d argument is passed, clone feeds with ssh instead of http
    if [ $developer == 1 ]; then
 	./scripts/feeds update -g
    else
 	./scripts/feeds update
    fi
-	./scripts/feeds update -ai

-    # replace core packages with iopsys versions
-    if [ $override == 1 ]; then
-	./scripts/feeds install -f -p feed_inteno_openwrt -a
-    fi

-    # targets need to be installed explicitly
-    ./scripts/feeds install -p feed_inteno_targets iopsys-brcm63xx-mips
-    ./scripts/feeds install -p feed_inteno_targets iopsys-brcm63xx-arm
-    ./scripts/feeds install -p feed_inteno_targets iopsys-ramips
-    
-    # install all packages
+    ./scripts/feeds install -f -p feed_inteno_openwrt -a
+    ./scripts/feeds install -f -p feed_inteno_juci -a
+    ./scripts/feeds install -f -p feed_inteno_packages -a
+    ./scripts/feeds install -f -p feed_inteno_broadcom -a
+    ./scripts/feeds install -f -p feed_inteno_targets iopsys-brcm63xx-mips
+    ./scripts/feeds install -f -p feed_inteno_targets iopsys-brcm63xx-arm
    ./scripts/feeds install -a 
+    ./scripts/feeds uninstall asterisk18
+    ./scripts/feeds uninstall zstream
+    ./scripts/feeds uninstall mtd-utils
+    ./scripts/feeds install -f -p feed_inteno_packages mtd-utils
+    ./scripts/feeds uninstall qrencode
+    ./scripts/feeds install -f -p feed_inteno_packages qrencode

-    # remove broken symlinks ( for packages that are no longer in the feed )
-    find -L package/feeds -maxdepth 2 -type l -delete
+    rm -rf package/feeds/oldpackages/libzstream # have to run this for now since uninstall is not working every time

    cp .genconfig_config_bak .config
    make defconfig
--- a/iop/scripts/genconfig.sh
+++ b/iop/scripts/genconfig.sh
@@ -1,369 +1,262 @@
 #!/bin/bash

 function genconfig {
-	export CLEAN=0
-	export IMPORT=1
-	export SRCTREEOVERR=0
-	export FILEDIR="files/"
-	export THEMEDIR="themes"
-	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"
-	CUSTPATH="customerconfigs"
-	export CUSTCONF="customerconfigs/customers"
-	export VERBOSE=0
-	export DEVELOPER=0
-	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
+    export CLEAN=0
+    export IMPORT=0
+    export SRCTREEOVERR=0
+    export FILEDIR="files/"
+    export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"  
+    export CUSTCONF="customerconfigs"
+    export VERBOSE=0
+    export DEVELOPER=0
+    export TMPDIR="/tmp/builder/"
+    LOCAL_MIRROR="http://mirror.inteno.se/mirror"

-	iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25 hpc_hu02"
-	iopsys_brcm63xx_arm="dg400 eg400 f104w f104 dg400prime dg400primeb 963138REF_P502"
-	iopsys_ramips="ex400"
-	ramips="mt7621"
-	target="bogus"
-	masterconfig=1
+    iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
+    iopsys_brcm63xx_arm="dg400"
+    target="bogus"
+
+    set_target() {

-	set_target()
-	{
 	local profile=$1

 	for p in $iopsys_brcm63xx_mips; do
-		if [ $p == $profile ]; then
-			target="iopsys_brcm63xx_mips"
-			return
-		fi
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_mips"
+            fi
 	done

 	for p in $iopsys_brcm63xx_arm; do
-		if [ $p == $profile ]; then
-			target="iopsys_brcm63xx_arm"
-			return
-		fi
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_arm"
+            fi
 	done
+    }

-	for p in $iopsys_ramips; do
-		if [ $p == $profile ]; then
-			target="iopsys_ramips"
-			return
-		fi
+
+    git remote -v | grep -q http || {
+	DEVELOPER=1
+
+	bcmAllowed=0
+	iceAllowed=0
+	endptAllowed=0
+	natalieAllowed=0
+
+	allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -w 'R\|W' | awk '{print$NF}')"
+	for repo in $allowedRepos; do
+	    case $repo in
+		bcmkernel) bcmAllowed=1 ;;
+		ice-client) iceAllowed=1 ;;
+		endptcfg) endptAllowed=1 ;;
+		natalie-dect*) natalieAllowed=1 ;;
+	    esac
 	done
+    }

-	for p in $ramips; do
-		if [ $p == $profile ]; then
-			target="ramips"
-			masterconfig=0
-			return
-		fi
-	done
+    v() {
+	[ "$VERBOSE" -ge 1 ] && echo "$@"
+    }

-	}
+    usage() {
+        echo
+        echo 1>&2 "Usage: $0 [OPTIONS] BoardConfig Customerconfig"
+        echo
+	echo "  -c,  remove all files under ./files and import from config "
+	echo "  -v,  verbose"
+	echo "  -u, Update customer config before applying"  
+	echo "	-p, set profile (if exists)"
+	echo "	-t, use latest git tag and number of commits since as version for the build"
+	echo "  -s, enable 'Package source tree override'"
+	echo 
+        echo "BoardConfig ex "
+	ls -1 configs
+	if [ -d "$CUSTCONF/$1" ]; then
+            echo "Customerconfig ex"
+	    ls  $CUSTCONF/*
+	fi  
+	echo
+	echo "Example ./genconfig vg50 TELIA" 
+        echo "(if no customerconfig is chosen the Inteno Config will be used)"
+	echo 	
+        exit 127
+    }

-	git remote -v | grep -q http || {
-		DEVELOPER=1
+    use_local_mirror()
+    {
+	if wget -T 3 -t 2 -O /dev/null $LOCAL_MIRROR >/dev/null 2>/dev/null
+	then
+	    echo "mirror [$LOCAL_MIRROR] exists. Using local mirror"
+	    sed -i "s;CONFIG_LOCALMIRROR=.*;CONFIG_LOCALMIRROR=\"$LOCAL_MIRROR\";" .config
+	else
+	    echo "mirror [$LOCAL_MIRROR] does not exist. Not using local mirror"
+	fi
+    }

-		bcmAllowed=0
-		iceAllowed=0
-		endptAllowed=0
-		natalieAllowed=0
-		mediatekAllowed=0
-
-		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
-		for repo in $allowedRepos; do
-			case $repo in
-			bcmkernel) bcmAllowed=1 ;;
-			ice-client) iceAllowed=1 ;;
-			endptcfg) endptAllowed=1 ;;
-			natalie-dect*) natalieAllowed=1 ;;
-			linux) mediatekAllowed=1 ;;
-			esac
-		done
-	}
-
-	v() {
-		[ "$VERBOSE" -ge 1 ] && echo "$@"
-	}
-
-	usage() {
-		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer ]"
-		echo
-		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\tVerbose"
-		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -p|--profile\tSet profile (if exists) default juci"
-		echo -e "  -s|--override\tEnable 'Package source tree override'"
-		echo -e "  -h|--help\tShow this message"
-		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\tList all Customers and their board types"
-		echo
-		echo "Example ./iop genconfig vg50 TELIA"
-		echo "(if no customerconfig is chosen the Inteno Config will be used)"
-		echo
-		exit 0
-	}
-
-	list_customers()
-	{
-		local ALL="$1"
-		local CUSTOMER="$2"
-		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common | grep -v juci-theme)"
-			if [ "$boards" ]; then
-				echo "$CUSTOMER has following boards:"
-				for board in $boards; do
-					echo -e "\t$board"
-				done
-			else
-				echo "No boards found for $CUSTOMER"
-			fi
-		elif [ "$CUSTOMER" ]; then
-			echo "No customer called $CUSTOMER"
-			exit 1
-		elif [ -d $CUSTCONF ]; then
-			local customers="$(ls -1 $CUSTCONF)"
-			if [ "$customers" -a "$ALL" == 1 ]; then
-				for customer in $customers; do
-					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common | grep -v juci-theme)"
-					if [ "$boards" ]; then
-						for board in $boards; do
-							echo -e "\t$board"
-						done
-					else
-						echo "has no boards"
-					fi
-				done
-			elif [ "$customers" ]; then
-				echo -e "$customers"
-			else
-				echo "no customers found"
-			fi
-		else
-			echo "No $CUSTCONF folder found"
-		fi
-		exit 0
-	}
-
-
-	generate_config()
-	{
+    generate_config()
+    {
 	DIFFFILE="$1"
 	MASTERFILE="$2"
 	while read p; do
-		v "$p"
-		sed -r -i "$p" $MASTERFILE
+	    v  "$p"
+	    sed -r -i "$p" $MASTERFILE
 	done < $DIFFFILE
-	}
+    }

-	setup_dirs()
-	{
-		if ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -qw ${CUSTREPO:22}; then
-			if [ ! -d "$CUSTPATH" ]; then
-				git clone "$CUSTREPO" "$CUSTPATH"
-			elif [ $IMPORT -eq 1 ]; then
-				cd $CUSTPATH
-				v "git pull"
-				git pull
-				cd - >/dev/null #go back
-			fi
-		else
-			echo "You do not have access to $CUSTREPO"
-		fi
-
-		if [ ! -d "$FILEDIR" ]; then
-			mkdir -p $FILEDIR
-		elif [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $FILEDIR*"
-			rm -rf $FILEDIR*
-		fi
-
-		if [ ! -d "$THEMEDIR" ]; then
-			mkdir -p $THEMEDIR
-		elif [ -d "$THEMEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $THEMEDIR/*"
-			rm -rf $THEMEDIR/*
-		fi
-	}
-
-	create_and_copy_files()
-	{
-		local BOARDTYPE=$1
-		local CUSTOMER=$2
-
-		# Validate seleced board and customer
-		set_target $BOARDTYPE
-		if [ $target == "bogus" ]; then
-			echo "Hardware profile does not exist"
-			exit 1
-		elif [ -n "$CUSTOMER" ]; then
-			if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-				echo "Customer profile for '$CUSTOMER' does not exist"
-				exit 1
-			elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-				echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-				if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					echo "Common profile configuration will be used"
-				else
-					exit 1
-				fi
-			fi
-		fi
-
-		# Generate base config
-		# Used only for iopsys targets, not openwrt targets
-		rm -f .config
-		if [ $masterconfig -eq 1 ]; then
-			v "Config $BOARDTYPE selected"
-			v "cp $CONFIGPATH/config .config"
-			cp $CONFIGPATH/config .config
-		fi
-
-		# Add target diff
-		local target_name=$(echo $target | sed 's/_/-/g')
-		local target_conf=target/linux/${target_name}/config
-		if [ -f $target_conf ]; then
-			cat $target_conf >> .config
-		fi
-
-		# Apply profile diff to master config if selected
-		if [ -n "$PROFILE" ]; then
-			if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
-				cat $CONFIGPATH/$PROFILE.diff >> .config
-			elif [ "$PROFILE" == "juci" ]; then
-				v "Default profile (juci) is selected."
-			else
-				echo "ERROR: profile $PROFILE does not exist!"
-				exit 1
-			fi
-		else
-			v "No profile selected! Using default."
-		fi
-
-		# Set target and profile
-		echo "CONFIG_TARGET_${target}=y" >> .config
-		echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-
-		echo "$CUSTOMER $BOARDTYPE" > $CURRENT_CONFIG_FILE
-
-		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMER" ]; then
-			if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-				v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
-				cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-			fi
-			if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-				v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-				cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-			fi
-			if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
-				customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
-				v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
-				cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
-			fi
-			if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-				v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-				cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-			fi
-			if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-				v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-				cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-			fi
-		fi
-
-		# Set target version
-		local GIT_TAG=$(git describe --abbrev=0 --tags)
-		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
-
-		# Enable Pckage source tree override if selected
-		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
-
-		# developer mode selected ?
-		echo "CONFIG_DEVEL=y" >>.config
-		if [ $DEVELOPER -eq 1 ]; then
-			# rewrite url to clone with ssh instead of http
-			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
-			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
-			[ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
-			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
-			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
-			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
-		else
-			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
-			echo "CONFIG_BCM_OPEN=y" >> .config
-			echo "CONFIG_ICE_OPEN=y" >> .config
-			echo "CONFIG_ENDPT_OPEN=y" >> .config
-			echo "CONFIG_NATALIE_OPEN=y" >> .config
-			echo "CONFIG_MEDIATEK_OPEN=y" >> .config
-		fi
-
-		# Force regeneration of themes
-		touch package/feeds/feed_inteno_juci/juci/Makefile
-
-		# Force regeneration of kernel Makefile
-		# Needed to disable kmods for iopsys-brcm targets
-		touch package/kernel/linux/Makefile
-
-		# we need to signal to bradcom SDK that we have changed the board id
-		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
-		# so just touch that file.
-		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-				
-		# Set default values based on selected parameters
-		v "$(make defconfig 2>&1)"
-
-		# Temporary fixup for juci/luci profile
-		if [ "$PROFILE" == "luci" ]; then
-			sed -i '/CONFIG_DEFAULT_juci/d' .config
-			sed -i '/CONFIG_PACKAGE_juci/d' .config
-			sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
-		fi
-
-		if [ $masterconfig -eq 1 ]; then
-			echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
-		fi
-
-		# Clean base-file package to force rebuild when changing profile
-		v "$(make package/base-files/clean 2>&1)"
-	}
-
-	####### main #####
-	if [ ! -e tmp/.iop_bootstrap ]; then
-		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
-		echo "Run: iop feeds_update"
-		exit 0
+    setup_dirs()
+    {
+	if [ $DEVELOPER -eq 1 ]; then
+	    if [ ! -d "$CUSTCONF" ]; then
+		git  clone  git@private.inteno.se:customerconfigs
+	    elif [ $IMPORT -eq 1 ]; then
+		cd customerconfigs
+		v "git pull"
+		git pull
+		cd ..
+	    fi
 	fi

-	if [ $# -eq 0 ]; then
-		echo Current profile:
-		cat $CURRENT_CONFIG_FILE
-		echo "Try ./iop genconfig -h' to get instructions if you want to change current config"
-		exit 0
+
+	if [ ! -d "$FILEDIR" ]; then
+	    mkdir $FILEDIR
+	elif  [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
+	    v "rm -rf $FILEDIR*"	
+	    rm -rf $FILEDIR*
+	fi
+    }
+
+
+    create_and_copy_files()
+    {
+	local BOARDTYPE=$1
+	local CUSTOMER=$2
+
+	# Validate seleced board and customer
+	set_target $BOARDTYPE
+	if [ $target == "bogus" ]; then
+	    echo "Hardware profile does not exist"
+	    exit 1
+	elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/" ]; then
+	    echo "Customer profile does not exist"
+	    exit 1
+	fi
+
+	# Clean base-file package to force rebuild when changing profile
+	make package/base-files/clean
+
+	# Base config on master
+	v  "Config $BOARDTYPE selected"
+	v "cp  $CONFIGPATH/config  .config"
+	cp  $CONFIGPATH/config  .config
+
+	# Apply profile diff to master config if selected
+	if [ -n "$PROFILE" ]; then 
+	    if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
+		cat $CONFIGPATH/$PROFILE.diff >> .config
+	    elif [ "$PROFILE" == "juci" ]; then
+		v "Default profile (juci) is selected."
+	    else
+		echo "ERROR: profile $PROFILE does not exist!"
+		exit 1
+	    fi
+	else 
+	    v "No profile selected! Using default."
+	fi
+	
+	# Set target and profile
+	echo "CONFIG_TARGET_${target}=y" >> .config
+	echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
+
+	# Add customerconfig diff if a customer is selected
+	if [ -n "$CUSTOMER" ]; then
+	    echo "$BOARDTYPE $CUSTOMER" > .current_config_file
+	    if [ -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/fs" ]; then
+		v "cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR"
+		cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR
+	    fi
+	    if [ -e "$CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff" ]; then
+		v "Apply $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff"
+		cat $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff >> .config
+	    fi
+	fi
+
+	# Set target version
+	local GIT_TAG=$(git describe --abbrev=0 --tags)
+	echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
+
+
+	# Enable Pckage source tree override if selected
+	[ $SRCTREEOVERR -eq 1 ] && \
+            echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
+
+
+	# developer mode selected ?
+	if [ $DEVELOPER -eq 1 ]; then
+	    # rewrite url to clone with ssh instead of http
+	    echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
+	    [ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
+	    [ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
+	    [ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    [ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
 	else
-		while [ -n "$1" ]; do
-			case "$1" in
-
-			-c|--clean) export CLEAN=1;;
-			-n|--no-update) export IMPORT=0;;
-			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
-			-p|--profile) export PROFILE="$2"; shift;;
-			-r|--repo) export CUSTREPO="$2"; shift;;
-			-s|--override) export SRCTREEOVERR=1;;
-			-h|--help) usage;;
-			-l|--list) list_customers 0 $2;;
-			-a|--list-all)list_customers 1;;
-			-*)
-				echo "Invalid option: $1 "
-				echo "Try -h or --help for more information."
-				exit 1
-				;;
-			*) break;;
-			esac
-			shift;
-		done
-
-		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
-
-		setup_dirs
-		create_and_copy_files "$1" "$2"
+	    echo "CONFIG_BCM_OPEN=y" >> .config
+	    echo "CONFIG_ICE_OPEN=y" >> .config
+	    echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    echo "CONFIG_NATALIE_OPEN=y" >> .config
 	fi
+
+	# Set default values based on selected parameters
+	make defconfig
+
+	# Temporary fixup for juci/luci profile
+	if [ "$PROFILE" == "luci" ]; then
+	    sed -i '/CONFIG_DEFAULT_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
+	fi
+
+	echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+    }
+
+    ####### main #####
+    if [ ! -e tmp/.iop_bootstrap ]; then
+	echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
+	echo "Run: iop feeds_update"
+	exit 0
+    fi
+
+    if [ $# -eq 0 ]; then
+	echo Current profile:
+	cat .current_config_file
+	echo "Try ./iop_get_config.sh -h' to get instructions if you want to change current config"
+	exit 0
+    else
+	
+	while [ -n "$1" ]; do 
+	    case "$1" in
+
+		-c) export CLEAN=1;;
+		-u) export IMPORT=1;;
+		-v) export VERBOSE="$(($VERBOSE + 1))";;
+		-p) export PROFILE="$2"; shift;; 
+		-t) export USE_TAG=1;; 
+		-s) export SRCTREEOVERR=1;;
+		-h) usage;;
+		-*)
+		    echo "Invalid option: $1 "
+		    echo "Try  -h' for more information."
+		    exit 1
+		    ;;
+		*) break;;
+	    esac
+	    shift;
+	done
+	[ -d $TMPDIR ] || mkdir $TMPDIR
+	setup_dirs
+	create_and_copy_files "$1" "$2"
+	[ -d $TMPDIR ] && rm -rf $TMPDIR
+	use_local_mirror
+    fi
 }

+
 register_command "genconfig" "Generate configuration for board and customer"
--- a/iop/scripts/generate_tarballs.sh
+++ b/iop/scripts/generate_tarballs.sh
@@ -1,17 +1,17 @@
 #!/bin/sh


+
 build_bcmkernel_consumer() {
-	local tarfile bcmkernelcommith sdkversion
-	sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
+	local tarfile bcmkernelcommith
 	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/feed_inteno_broadcom/bcmkernel/$sdkversion.mk | cut -d'=' -f2)
 	# do not build bcmopen sdk if it was already built before
-	ssh $SERVER "ls $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz" && return
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/bcmopen-$profile-$bcmkernelcommith.tar.gz" && return
 	cd ./build_dir/target-*_uClibc-0.9.33.*/bcmkernel-3.4-$sdkversion/bcm963xx/release
 	sh do_consumer_release -p $profile -y
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
 	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
-	scp $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
+	scp $tarfile inteno@ihgsp.inteno.se:/home/inteno/public/www/iopsys/consumer/bcmopen-$profile-$bcmkernelcommith.tar.gz
 	rm -f $tarfile
 	cd $curdir
 }
@@ -22,12 +22,12 @@ build_natalie_consumer() {
 	grep -q "CONFIG_TARGET_NO_DECT=y" .config && return
 	natalieversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
 	nataliecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
-	ssh $SERVER "ls $FPATH/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
 	cd ./build_dir/target-*_uClibc-0.9.33.*/natalie-dect-$natalieversion/
 	mkdir natalie-dect-open-$natalieversion
 	cp NatalieFpCvm6362/Src/Projects/NatalieV3/FpCvm/Linux6362/dects.ko natalie-dect-open-$natalieversion/dect.ko
 	tar -czv  natalie-dect-open-$natalieversion/ -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
-	scp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $SERVER:$FPATH/
+	scp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
 	cp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $curdir/
 	rm -rf natalie-dect-open-$natalieversion
 	rm -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
@@ -40,12 +40,12 @@ build_endptcfg_consumer() {
 	grep -q "CONFIG_TARGET_NO_VOICE=y" .config && return
 	endptversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/endptcfg/Makefile | cut -d'=' -f2)
 	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/endptcfg/Makefile | cut -d'=' -f2)
-	ssh $SERVER "ls $FPATH/endptcfg-$profile-$endptversion-$endptcommith.tar.gz" && return
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/endptcfg-$profile-$endptversion-$endptcommith.tar.gz" && return
 	cd ./build_dir/target-*_uClibc-0.9.33.*/endptcfg-$endptversion/
 	mkdir endptcfg-open-$endptversion
 	cp endptcfg endptcfg-open-$endptversion/
 	tar -czv  endptcfg-open-$endptversion/ -f endptcfg-$profile-$endptversion-$endptcommith.tar.gz
-	scp endptcfg-$profile-$endptversion-$endptcommith.tar.gz $SERVER:$FPATH/
+	scp endptcfg-$profile-$endptversion-$endptcommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
 	cp endptcfg-$profile-$endptversion-$endptcommith.tar.gz $curdir/
 	rm -rf endptcfg-open-$endptversion
 	rm -f endptcfg-$profile-$endptversion-$endptcommith.tar.gz
@@ -59,98 +59,30 @@ build_ice_consumer() {
 	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
 	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
 	iceversion=$icebasever$icerelease
-	ssh $SERVER "ls $FPATH/ice-client-$target-$iceversion-$icecommith.tar.gz" && return
-	cd ./build_dir/target-*_uClibc-0.9.33.*/ice-client-$icebasever/ipkg-* || cd ./build_dir/target-mips*musl-*/ice-client-$icebasever/ipkg-*
-	tar -czv  ice-client -f ice-client-$target-$iceversion-$icecommith.tar.gz
-	scp ice-client-$target-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
-	cp ice-client-$target-$iceversion-$icecommith.tar.gz $curdir/
-	rm -f ice-client-$target-$iceversion-$icecommith.tar.gz
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/ice-client-$profile-$iceversion-$icecommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/ice-client-$icebasever/ipkg-*
+	tar -czv  ice-client -f ice-client-$profile-$iceversion-$icecommith.tar.gz
+	scp ice-client-$profile-$iceversion-$icecommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
+	cp ice-client-$profile-$iceversion-$icecommith.tar.gz $curdir/
+	rm -f ice-client-$profile-$iceversion-$icecommith.tar.gz
 	cd $curdir
 }

-build_mediatek_kernel() {
-	local mediatek_commit kernel_version kernel
-
-	mediatek_commit=$(grep CONFIG_KERNEL_GIT_COMMIT .config | cut -d '=' -f2 | tr -d '"')
-	kernel_version=$(grep KERNEL_PATCHVER target/linux/iopsys-ramips/Makefile  | cut -d '=' -f2)
-	kernel=linux-${kernel_version}.*
-	ssh $SERVER "ls $FPATH/mediatek-kernel-open-$mediatek_commit.tar.gz" && return
-	echo "Building mediatek kernel tarball from kernel commit:"	
-	echo $mediatek_commit
-	cd build_dir/target-mipsel_1004kc*/linux-iopsys-ramips_*/$kernel
-
-	# Save Kconfig files to recreate the same kernel config,
-	# delete everyting else.
-	find drivers/net/wireless/mt_wifi -type f ! -name Kconfig | xargs rm
-	find drivers/net/wireless/rlt_wifi -type f ! -name Kconfig | xargs rm
-
-	# remove git repo
-	rm -rf .git
-
-	# patch kernel for openstk
-	ls consumer_release | while read line; do patch -p1 < consumer_release/$line; done
-	cd ..
-
-	tar -czv $kernel -f mediatek-kernel-open-$mediatek_commit.tar.gz
-	scp mediatek-kernel-open-$mediatek_commit.tar.gz $SERVER:$FPATH/
-	cd $curdir
-}
-
-function print_usage {
-	echo "Usage: $0 generate_tarballs"
-	echo "  -t <target>"
-}

 function generate_tarballs {

-    SERVER="god@software.inteno.se"
-    FPATH="/var/www/html/iopsys/consumer"
-
    git remote -v | grep -q http && return # do not continue if this is an open SDK environment

-    target=$(grep CONFIG_TARGET_BOARD .config | cut -d'=' -f2 | tr -d '"')
-    board=$(grep CONFIG_TARGET_IBOARDID .config | cut -d'=' -f2 | tr -d '"')
    profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
+    sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
    curdir=$(pwd)

-
-	# Execute user command
-	while getopts "t:h" opt; do
-		case $opt in
-			t)
-				stk_target=${OPTARG}
-				;;
-			h)
-				print_usage
-				exit 1
-				;;
-			\?)
-				print_usage
-				exit 1
-				;;
-		esac
-	done
-
-	if [ ! -n "$stk_target" ]; then
-		print_usage
-		exit 1
-	fi
-
-	if [ "$stk_target" == "broadcom" ]; then
-		build_bcmkernel_consumer
-		build_natalie_consumer
-		build_endptcfg_consumer
-		build_ice_consumer
-	elif [ "$stk_target" == "mediatek" ]; then
-		build_mediatek_kernel
-		build_ice_consumer		
-	else
-		echo "Invalid target: $stk_target"
-		print_usage
-		exit 1
-	fi
+    build_bcmkernel_consumer
+    build_natalie_consumer
+    build_endptcfg_consumer
+    build_ice_consumer

 }

-register_command "generate_tarballs" "Generate tarballs for Open SDK"
+register_command "generate_tarballs" "Generate tarballs for openstk"

--- a/iop/scripts/setup_host.sh
+++ b/iop/scripts/setup_host.sh
@@ -0,0 +1,177 @@
+#!/bin/bash
+
+function setup_host {
+
+    if [ "$(whoami)" != "root" ]; then
+	echo "Please run this script as root!"
+	exit 1
+    fi
+
+    packages_all="bison flex g++ g++-multilib zlib1g-dev gettext gawk svn-buildpackage libncurses5-dev ncurses-term git automake gtk-doc-tools liblzo2-dev uuid-dev execstack"
+    packages_perl="libconvert-binary-c-perl libdigest-crc-perl"
+    packages_x64="libc6-dev-i386 lib32z1"
+    packages_npm="npm nodejs yui-compressor"
+
+    curdir=$(pwd)
+
+    #===============#
+    # Prerequisites #
+    #===============#
+
+    mysh=$(ls -hl /bin/sh | awk -F'[ ,/]' '{print$NF}')
+    if [ "$mysh" != "bash" ]; then
+	echo "On Debian based systems, e.g. Ubuntu, /bin/sh must point to bash instead of $mysh"
+	read -p "Do you approve this change (y/n): " ans
+	if [ "$ans" == "y" ]; then
+	    rm -f /bin/sh
+	    ln -s bash /bin/sh
+	else
+	    echo "Warning! You haven't pointed /bin/sh to bash."
+	    cd $curdir
+	    exit 1
+	fi
+    fi
+
+    echo "The packages below must be installed"
+    echo $packages_all $packages_perl
+    read -p "Do you approve insallation of these packages (y/n): " ans
+    if [ "$ans" == "y" ]; then
+	apt-get install $packages_all
+	apt-get install $packages_perl
+    else
+	cd $curdir
+	exit 1
+    fi
+
+    if [ "$(uname -m | awk '{print$1}')" == "x86_64" ]; then
+	echo "You are running a Linux Distribution based on 64-bit kernel"
+	echo "The packages below must be installed"
+	echo $packages_x64
+	read -p "Do you approve insallation of these packages (y/n): " ans
+	if [ "$ans" == "y" ]; then
+	    apt-get install $packages_x64
+	else
+	    cd $curdir
+	    exit 1
+	fi
+    fi
+
+    echo "The packages below must be installed in order to be able to compile JUCI"
+    echo $packages_npm
+    read -p "Do you approve insallation of these packages (y/n): " ans
+    if [ "$ans" == "y" ]; then
+	apt-get install npm nodejs yui-compressor
+	npm install -g npm
+	npm install -g grunt-cli
+	npm install -g mocha
+	npm install -g bower
+	npm install -g uglify-js
+	npm install -g less
+
+	if [ "$(which node)" == "" ]; then
+	    NODEJS=$(which nodejs)
+	    if [ "$NODEJS" != "" ]; then
+		read -p "Found nodejs executable at $(which nodejs), but no path to 'node'. Do you want to create a symlink? (y/n): " ans
+		if [ "$ans" == "y" ]; then
+		    ln -s "$NODEJS" "/usr/bin/node"
+		fi
+	    fi
+	fi
+
+	user=$(who | head -1 | awk '{print$1}')
+	[ -n $user ] && chown -R $user:$user /home/$user/.npm/
+    else
+	cd $curdir
+	exit 1
+    fi
+
+    # Get the Broadcom toolchain from here and unpack the mips/arm package to /opt:
+    echo -n "Checking for Broadcom MIPS toolchain: "
+    if [ -d /opt/toolchains/crosstools-mips-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21 ]; then
+	install_mips=0
+	echo "YES"
+    else
+	install_mips=1
+	echo "NO"
+    fi
+
+    echo -n "Checking for Broadcom ARM toolchain: "
+    if [ -d /opt/toolchains/crosstools-arm-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21-NPTL ]; then
+	install_arm=0
+	echo "YES"
+    else
+	install_arm=1
+	echo "NO"
+    fi
+
+    if [ $install_mips -eq 1 -o $install_arm -eq 1 ]; then
+	read -p "Do you approve insallation of missing toolchains (y/n): " ans
+	if [ "$ans" == "y" ]; then
+	    echo "Downloading toolchain"
+	else
+	    cd $curdir
+	    exit 1
+	fi
+
+	cd ~
+	wget http://iopsys.inteno.se/iopsys/toolchain/crosstools-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21.Rel1.2-full.tar.bz2
+	tar jxf crosstools-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21.Rel1.2-full.tar.bz2
+	cd /
+
+	if [ $install_mips -eq 1 ]; then
+	    echo "Installing MIPS toolchain"
+	    tar jxf ~/crosstools-mips-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21.Rel1.2.tar.bz2
+	fi
+
+	if [ $install_arm -eq 1 ]; then
+	    echo "Installing ARM toolchain"
+	    tar jxf ~/crosstools-arm-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21-NPTL.Rel1.2.tar.bz2
+	fi
+
+	rm -f ~/crosstools-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21-sources.tar.bz2
+	rm -f ~/crosstools-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21.Rel1.2-full.tar.bz2
+	rm -f ~/crosstools-mip*-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21.Rel1.2.tar.bz2
+	rm -f ~/crosstools-arm-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21-NPTL.Rel1.2.tar.bz2
+    fi
+
+    gcc_ver=$(ls -l /usr/bin/gcc-[0-9]* | head -1 | awk '{print$NF}' | cut -d'-' -f2)
+    if [ "$gcc_ver" != "4.8" ]; then
+	echo "Your current gcc version is $gcc_ver, but it must be changed to 4.8"
+	read -p "Do you approve this change (y/n): " ans
+	if [ "$ans" == "y" ]; then
+	    apt-get install gcc-4.8
+	    apt-get install g++-4.8
+	    apt-get install gcc-4.8-multilib
+
+	    update-alternatives --install /usr/bin/g++ c++ /usr/bin/g++-4.8 100
+	    update-alternatives --install /usr/bin/g++ c++ /usr/bin/g++-$gcc_ver 90
+
+	    update-alternatives --install /usr/bin/gcc cc /usr/bin/gcc-4.8 100
+	    update-alternatives --install /usr/bin/gcc cc /usr/bin/gcc-$gcc_ver 90
+
+	    update-alternatives --install /usr/bin/cpp cpp /usr/bin/cpp-4.8 100
+	    update-alternatives --install /usr/bin/cpp cpp /usr/bin/cpp-$gcc_ver 90
+
+	    update-alternatives --set c++ /usr/bin/g++-4.8
+	    update-alternatives --set cc  /usr/bin/gcc-4.8
+	    update-alternatives --set cpp /usr/bin/cpp-4.8
+	    ln -s /etc/alternatives/cc /usr/bin/cc 
+
+	    echo "The deafult gcc version has now been changed from $gcc_ver to 4.8"
+	else
+	    cd $curdir
+	    exit 1
+	fi
+    fi
+
+    echo ""
+    echo ""
+    echo "You have successfully installed and configred prerequisites to be able to build an iopsys firmware"
+    echo ""
+    echo ""
+
+    cd $curdir
+
+}
+
+register_command "setup_host" "Install needed packets to host machine"
--- a/iop/scripts/ssh_sysupgrade.sh
+++ b/iop/scripts/ssh_sysupgrade.sh
@@ -34,7 +34,7 @@ function ssh_sysupgrade_latest {
 		exit 1
 	fi
 	{ cd `dirname $0`
-		IMAGE=`ls -Art bin/*/*.y[23] | tail -n1`
+		IMAGE=`ls -Art bin/*/*.y | tail -n1`
 		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
 	}
 }
--- a/iop/scripts/update_package.sh
+++ b/iop/scripts/update_package.sh
@@ -1,5 +1,6 @@
 #!/bin/bash

+
 print_git_update()
 {
    echo "pkg -> ${PKG_NAME}"
@@ -98,28 +99,6 @@ insert_hash_in_feed_makefile()
    (cd ${PKG_DIR}; git add ${name})
 }

-insert_version_in_feed_makefile()
-{
-    if [ -n "$PKG_SOURCE_VERSION_FILE" ]
-    then
-	name="$PKG_SOURCE_VERSION_FILE"
-    else
-	name=Makefile
-    fi
-
-    last_version=$(awk -F '=' '/PKG_VERSION:=/ {print $2}' ${PKG_DIR}/${name})
-
-	echo -n "please enter version: "
-	read -ei "$last_version" answer
-
-	if [ -z ${answer} ]; then
-		return
-	fi
-
-    sed -i -e "s/\(^PKG_VERSION:=\).*/\1${answer}/" ${PKG_DIR}/${name}
-    (cd ${PKG_DIR}; git add ${name})
-}
-

 # BUG: fix if only local branche name!
 branch_uptodate()
@@ -394,16 +373,12 @@ insert_hash_in_feeds_config()
 check_packages()
 {
    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
-    echo "Now checking if any changes have been done to the packages."
+    echo "Now checking if any changes has been done to the packages."
    echo -e "${Green}_______________________________________________________________________________${Color_Off}"

-    # only scan in the build directory that is currently in use.
-    CPU=$(grep  "CONFIG_CPU_TYPE=" .config| cut -f2 -d\")
-    LIBC=$(grep "CONFIG_LIBC=" .config| cut -f2 -d\")
-    
    # First scan all files in build dir for packages that have .git directories.
-    all_pkgs=$(find build_dir/*${CPU}*${LIBC}* -name ".git")
-    
+    all_pkgs=$(find build_dir/ -name ".git")
+
    for pkg in `echo "$all_pkgs"`
    do
 	pkg=$(dirname $pkg)
@@ -425,7 +400,6 @@ check_packages()
 		    #  print_git_update
 		    git_repos_uptodate
 		    insert_hash_in_feed_makefile
-		    [ ${UPDATE} -eq 1 ] && insert_version_in_feed_makefile
 		    create_message >tmp/msg
 		    commit_feed tmp/msg
 		    insert_hash_in_feeds_config
@@ -489,7 +463,7 @@ Date: %ai%n\
 check_feeds()
 {
    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
-    echo "Now checking if any changes have been done to the feeds."
+    echo "Now checking if any changes has been done to the feeds."
    echo -e "${Green}_______________________________________________________________________________${Color_Off}"

    feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
@@ -536,7 +510,7 @@ check_feeds()
 	    read answer

 	    case $answer in
-		n|N|'')
+		n|N)
 		    continue;;
 	    esac
 	    branch_uptodate feeds/${feed}
@@ -573,19 +547,10 @@ feeds_at_top()
    exit 0
 }

-usage(){
-	echo -e "$0 [flags]"
-	echo -e "flags:"
-	echo -e "  -v\tVerbose mode"
-	echo -e "  -h\tShow this help"
-	echo -e "  -u\tUpdate package version\n"
-}

 # Exported interface
 function update_package {

-	UPDATE=0
-
    Color_Off='\033[0m'       # Text Reset

    # Regular Colors
@@ -598,18 +563,15 @@ function update_package {
    Cyan='\033[0;36m'         # Cyan
    White='\033[0;37m'        # White

-    while getopts "v:hu" opt; do
+    while getopts "v:h" opt; do
 	case $opt in
 	    v)
 		verbose=$OPTARG
 		;;
 	    h)
-			usage
-			exit 1
-			;;
-		u)
-			UPDATE=1
-			;;
+		echo "some help! No options yet"
+		exit 1
+		;;
 	    \?)
 		echo "Invalid option: -$OPTARG" >&2
 		exit 1
--- a/iup/Makefile
+++ b/iup/Makefile
@@ -17,11 +17,11 @@ define Package/iup
  SECTION:=net
  CATEGORY:=Network
  TITLE:=iup client
-  DEPENDS:=+libuci +uci +busybox
+  DEPENDS:=+libuci  +uci +busybox
 endef

 define Package/iup/description
-	This package contains Inteno's IUP Client
+	This package contains Intenos IUP Client
 endef

 define Build/Compile
--- a/Show More
+++ b/Show More