Update feed [ feed_inteno_packages ] package [ peripheral_manager ]

-------------------------------------------------------------------------------
* abe5807 mem leak: add missing file to previous mem fix patch
-------------------------------------------------------------------------------
commit abe58070db6a616eb4f24304f0613c9d67a77775
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2017-02-24 18:23:15 +0100

    mem leak: add missing file to previous mem fix patch

Base directory -> /
 src/catv.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 52 insertions(+), 5 deletions(-)
-------------------------------------------------------------------------------

asterisk-1.8.x-mod/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=asterisk18-mod
 PKG_VERSION:=1.8.10.1
 
-PKG_SOURCE_VERSION:=ee99af0d91a2197529b13075d802ebc37e644e40
+PKG_SOURCE_VERSION:=62c3764e6765fa9b1d22cb5dda26476e4742bdcf
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
 

asterisk-1.8.x-mod/files/asterisk.hotplug

@@ -11,7 +11,6 @@ config_get bindintf SIP bindintf
 
 if [ -n "$bindintf" ]; then
 	network_get_ipaddr bindaddr "$bindintf"
-	[ -z "$bindaddr" ] && network_get_ipaddr6 bindaddr "$bindintf"
 	bindaddr="${bindaddr:-0.0.0.0}"
 	sed -i "s/bindaddr=.*/bindaddr=$bindaddr/g" /etc/asterisk/sip.conf
 	[ -e /var/run/asterisk/asterisk.ctl ] && /etc/init.d/asterisk reload

asterisk-1.8.x-mod/files/asterisk.init

@@ -40,7 +40,6 @@ start_service() {
 
 reload_service() {
 	asterisk -rx "config reload $CONFDIR/sip.conf"
-	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
 	asterisk -rx "brcm reload"

ated/Makefile

@@ -1,67 +0,0 @@
-#
-# Copyright (C) 2016 inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/ated
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))

bashdb/Makefile

@@ -1,62 +0,0 @@
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bashdb
-PKG_VERSION:=4.4-0.92
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-#PKG_SOURCE_URL:=http://sourceforge.net/projects/bashdb/files/bashdb/$(PKG_VERSION)
-PKG_SOURCE_URL:=@SF/bashdb/
-PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
-#PKG_CAT:=zcat
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Bash script debugging utility.
-  URL:=http://sourceforge.net/projects/bashdb/
-endef
-
-define Package/$(PKG_NAME)/description
-  Bash script debugging utility.
-endef
-
-define Build/Compile
-        $(MAKE) -C $(PKG_BUILD_DIR) \
-                $(TARGET_CONFIGURE_OPTS) \
-                CFLAGS="$(TARGET_CFLAGS) -DLINUX $(TARGET_CPPFLAGS) \
-                        -I./src" \
-                LIBS="$(TARGET_LDFLAGS)" \
-                DESTDIR="$(PKG_INSTALL_DIR)"
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bashdb $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/share
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.sh  $(1)/usr/share/$(PKG_NAME)/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.inc  $(1)/usr/share/$(PKG_NAME)/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/init
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/init/*.sh  $(1)/usr/share/$(PKG_NAME)/init/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/show_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/set_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/info_sub
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/*.sh $(1)/usr/share/$(PKG_NAME)/command/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/show_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/show_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/set_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/set_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/info_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/info_sub/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/*.sh $(1)/usr/share/$(PKG_NAME)/lib/
-endef
-
-$(eval $(call BuildPackage,bashdb))

brcmslic/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=0.1
-PKG_SOURCE_URL:=git@private.inteno.se:brcmslic
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=837ec19e37650e424e77c921672a0806e198ba7b
-PKG_NAME:=brcmslic
-
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/brcmslic
-  CATEGORY:=Utilities
-  TITLE:=Brcmslic
-  URL:=
-  DEPENDS:=
-endef
-
-define Package/brcmslic/description
-	Brcmslic
-endef
-
-
-define Package/brcmslic/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/brcmslic $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endpt $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,brcmslic))

brcmslic/files/dect.config

@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-

catv/files/etc/config/catv

@@ -1,4 +1,4 @@
 
 config service 'catv'
-        option enable '0'
+        option enable 'no'
         option filter '3'

dectmngr2/Makefile

@@ -11,7 +11,7 @@ PKG_RELEASE:=1
 PKG_VERSION:=1.1.0
 PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=13da1568d57b8e6732dadc16de828d64c81906b8
+PKG_SOURCE_VERSION:=17aa3b1d8d372ebcf4d37379f7cc4fb59c461d4b
 PKG_NAME:=dectmngr2
 
 

fping/Makefile

@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fping
-PKG_VERSION:=4.0
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://fping.org/dist/
-PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
-
-PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
-PKG_LICENSE:=BSD-4-Clause
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fping
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
-  URL:=http://fping.org/
-endef
-
-
-define Package/fping/description
-	fping is a ping like program which uses the Internet Control Message Protocol
-	(ICMP) echo request to determine if a target host is responding.  fping
-	differs from ping in that you can specify any number of targets on the command
-	line, or specify a file containing the lists of targets to ping.  Instead of
-	sending to one target until it times out or replies, fping will send out a
-	ping packet and move on to the next target in a round-robin fashion.
-endef
-
-CONFIGURE_ARGS+= \
-	--enable-ipv4 \
-	--enable-ipv6
-
-TARGET_CFLAGS += -std=gnu99
-
-define Package/fping/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,fping))

ice-client/Makefile

@@ -19,18 +19,18 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.0.1
-PKG_RELEASE:=RC1
+BASE_PKG_VERSION:=4.2.0
+PKG_RELEASE:=RC7
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=a2635dd11c477d70728ab6cbe5c2dee3965dbe14
+PKG_SOURCE_VERSION:=ee66d278b90b931013f2bc1c7a69f24ef5c742ea
 ifeq ($(CONFIG_ICE_OPEN),y)
-TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_SOURCE:=$(PKG_NAME)-$(TARGET_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
 else
@@ -45,7 +45,7 @@ endif
 
 ###########################--RELEASE--################################
 
-#include $(INCLUDE_DIR)/uclibc++.mk
+include $(INCLUDE_DIR)/uclibc++.mk
 include $(INCLUDE_DIR)/package.mk
 
 define Package/ice-client/Default
@@ -58,7 +58,7 @@ define Package/ice-client
 $(call Package/ice-client/Default)
 	TITLE:=ice-client
 	MENU:=1
-	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
+	DEPENDS:=+libopenssl +uclibcxx +libubus +ubus +ubusd +jshn +libubox +libpthread
 endef
 
 define Package/ice-client/config
@@ -154,7 +154,6 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/scripts/etc/config/ice $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/iopsys
 	$(CP) $(PKG_BUILD_DIR)/scripts/server.ini $(1)/etc/iopsys	
-	$(CP) $(PKG_BUILD_DIR)/scripts/defaults.ini $(1)/etc/iopsys	
 	$(CP) $(PKG_BUILD_DIR)/scripts/modify.ini $(1)/etc/iopsys
 	$(INSTALL_DIR) $(1)/etc/iopsys/certificates
 	$(CP) $(PKG_BUILD_DIR)/scripts/cert_server_ca.pem $(1)/etc/iopsys/certificates

ice-client/files/ice-client.uci_default

@@ -1,15 +1,13 @@
 #!/bin/sh
 
 grep -rq "^ice:" /etc/passwd || {
-	adduser -D -H -s /bin/false ice
+	local password="$(db get hw.board.wpaKey)"
+	if [ -n "$password" ]; then
+		adduser -D -H -s /bin/false ice
+		(echo $password; sleep 1; echo $password) | passwd ice >/dev/null 2>&1
+	fi
 }
 
-uci -q delete passwords.ice
-uci -q set passwords.ice=usertype
-uci -q set passwords.ice.password="\$WPAKEY"
-uci -q add_list passwords.ice._access_r=root
-uci -q commit passwords
-
 uci show rpcd | grep username=.*ice.* >/dev/null || {
 cat >> /etc/config/rpcd << EOF
 
@@ -24,8 +22,8 @@ config login
 	list write 'juci-broadcom-iptv'
 	list write 'juci-broadcom-vlan'
 	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-wireless'
-	list write 'juci-wireless-admin'
+	list write 'juci-broadcom-wl'
+	list write 'juci-broadcom-wl-admin'
 	list write 'juci-catv'
 	list write 'juci-ddns'
 	list write 'juci-diagnostics'
@@ -49,7 +47,6 @@ config login
 	list write 'juci-network-netifd'
 	list write 'juci-owsd'
 	list write 'juci-printer'
-	list write 'juci-realtime-graphs'
 	list write 'juci-samba'
 	list write 'juci-sfp'
 	list write 'juci-snmpd'
@@ -59,7 +56,6 @@ config login
 	list write 'juci-usb'
 	list write 'core'
 	list write 'unauthenticated'
-
 EOF
 }
 

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2017-11-24
+PKG_VERSION:=3.0-2017-01-20
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d74b88913f676ebf9a210c4674555d080e57ff52
+PKG_SOURCE_VERSION:=5c39d8d99127010c8d553495cd318ced80531a04
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -66,10 +66,6 @@ define Build/Prepare
 endef
 endif
 
-ifeq ($(CONFIG_TARGET_IBOARDID),"EX400")
-TARGET_CFLAGS += -DEX400
-endif
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
 
@@ -126,18 +122,16 @@ endif
 
 define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(CP) ./files/icwmp.hotplug $(1)/etc/hotplug.d/iface/90-icwmp
 ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(INSTALL_DIR) $(1)/usr/share/icwmp
 	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp

icwmp/files/icwmp.hotplug

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-grep -q "Designated" /etc/banner || exit 0
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-local islan="$(uci -q get network.$INTERFACE.is_lan)"
-[ "$islan" == "1" ] && exit 0
-
-local proto="$(uci -q get network.$INTERFACE.proto)"
-[ "$proto" == "none" ] && exit 0
-
-local ifname="$(uci -q get network.$INTERFACE.ifname)"
-[ "${ifname:0:1}" == "@" ] && exit 0
-
-mkdir -p /tmp/ipv4
-
-local previpaddr=""
-local curipaddr=""
-local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-previpaddr=$(cat $ipaddrfile 2>/dev/null)
-network_get_ipaddr curipaddr $INTERFACE
-[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-local prevgateway=""
-local curgateway=""
-local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-prevgateway=$(cat $gatewayfile 2>/dev/null)
-network_get_gateway curgateway $INTERFACE
-[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-local prevsubnets=""
-local cursubnets=""
-local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-prevsubnets=$(cat $subnetsfile 2>/dev/null)
-network_get_subnets cursubnets $INTERFACE
-[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-[ "$previpaddr" = "$curipaddr" -a "$prevgateway" = "$curgateway" -a "$prevsubnets" = "$cursubnets" ] && exit 0
-
-[ -f /etc/config/cwmp ] && /etc/init.d/icwmpd reload &
-

ifbt/Makefile

@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ifbt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=da97d6668d3c0e3f2be226c66b406e90179ada81
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@private.inteno.se:ifbt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ifbt
-	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-	TITLE:=Fast BSS Transition
-endef
-
-define Package/ifbt/description
-	ifbt is Iopsys application for fast BSS transition
-endef
-
-define Package/ifbt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ifbt))

inbd/Makefile

@@ -1,53 +0,0 @@
-#
-# Copyright (C) 2016 Inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=inbd
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=92f918d26c0ffc22d1704f5ea6cbb0bd7fdbdab9
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se/inbd
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inbd
-	CATEGORY:=Utilities
-	TITLE:=Inteno Netlink Bridge Daemon
-	URL:=
-	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
-endef
-
-define Package/inbd/description
-	Application handling netlink messages from kernel and sending them out on ubus.
-endef
-
-define Package/inbd/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inbd $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/inbd $(1)/etc/init.d/
-endef
-
-$(eval $(call BuildPackage,inbd))

inteno-netmodes/Makefile

@@ -12,7 +12,6 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/inteno-netmodes
   CATEGORY:=Base system
-  DEPENDS:=+fping
   TITLE:=Predefined Network Modes
 endef
 

inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-handler

@@ -1,119 +0,0 @@
-#!/bin/sh
-
-[ "$INTERFACE" != "wan" ] && exit
-
-. /lib/functions/network.sh
-
-network_get_ipaddr ip $INTERFACE
-repeaterready="$(uci -q get netmode.setup.repeaterready)"
-
-[ -z "$ip" ] && exit
-
-toggle_firewall() {
-	local section=$1
-	local disable=$2
-	config_get name "$1" name
-	if [ "$name" == "wan" ]; then
-		uci -q set firewall.settings.disabled=$disable
-		if [ "$disable" == "1" ]; then
-			uci -q set firewall.$section.input="ACCEPT"
-		else
-			uci -q set firewall.$section.input="REJECT"
-		fi
-		uci -q commit firewall
-	fi
-}
-
-set_disabled() {
-	config_load firewall
-	config_foreach toggle_firewall zone $1
-	/etc/init.d/firewall reload
-}
-
-is_inteno_macaddr()
-{
-	macaddr=$1
-
-	echo $macaddr | grep -i -e "^00:22:07" \
-				-e "^02:22:07" \
-				-e "^44:D4:37" \
-				-e "^00:0C:07" \
-				-e "^02:0C:07" \
-				-e "^06:0C:07" \
-				-e "^00:0C:43" \
-				-e "^02:0C:43" \
-				-e "^06:0C:43" \
-	&& return
-	false
-}
-
-switch_mode() {
-	[ "$repeaterready" == "1" ] || return
-
-	# flush the ip on br-lan; br-lan will anyhow be deleted.
-	# this is needed if the ip received on the wan is also from the same net
-	ip addr flush dev br-lan
-
-	# flush iptables in case the MASTER
-	# tries to configure us before
-	# firewall is disabled the proper way
-	iptables -F
-
-	ubus call leds set  '{"state" : "allflash"}'
-
-	local ret=0
-	# let netmode-conf up to 20 seconds before switching mode
-	for tm in 2 4 6 8; do
-		if [ -f /tmp/wificontrol.txt ]; then
-			ret=1
-			break
-		fi
-		sleep $tm
-	done
-
-	# let netmode-conf take over
-	[ $ret -eq 1 ] && return
-
-	# go head with switching mode
-	touch -f /tmp/switching_mode
-	echo "Switching to 'extender' mode" > /dev/console
-	uci -q set netmode.setup.curmode='repeater'
-	uci set netmode.setup.repeaterready=0
-	uci commit netmode
-	/etc/init.d/netmode reload
-	echo "Restarting network services" > /dev/console
-	ubus call network reload
-	wifi reload nodat
-	ubus call router.network reload
-	ubus call leds set  '{"state" : "normal"}'
-	rm -f /tmp/switching_mode
-}
-
-test_ip() {
-	if [ -n "$(echo $ip | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ]; then
-		# private IP
-		switch_mode
-		set_disabled 1
-	else
-		# public IP
-		set_disabled 0
-		[ "$1" -eq "1" ] && {
-			uci set netmode.setup.repeaterready=0
-			uci commit netmode
-			local pid="$(ps | grep wificontro[l] | awk '/repeater/ {print $1}')"
-			[ "$pid" != "" ] && kill -9 $pid
-			pid="$(pidof netmode-client-detect)"
-			[ "$pid" == "" ] && /sbin/netmode-client-detect &
-
-			# set default JUCI page to overview
-			uci -q set juci.juci.homepage="overview"
-			uci commit juci
-		}
-	fi
-}
-
-case "$(uci -q get netmode.setup.curmode)" in
-		repeater*) test_ip ;;
-		*) [ "$repeaterready" == "1" ] && test_ip 1;;
-esac
-

inteno-netmodes/files/etc/hotplug.d/iface/70-shiftrange

@@ -1,251 +0,0 @@
-#!/bin/sh
-# this scripts shifts the lan network prefixes
-# if a wan interface has the same network prefix.
-
-. /lib/functions.sh
-. /lib/functions/network.sh
-
-local lockfile="/tmp/70-shiftrange.lock"
-local restricted_nets=""
-local all_nets=""
-
-
-#####
-##### initial functions
-#####
-
-initial_check()
-{
-	# run only on ifup
-	[ "$ACTION" == "ifup" ] || exit 0
-
-	# run only for uplink (not is_lan) interfaces
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" != "1" ] || exit 0
-
-	# run only if the uplink interface has a configured protocol
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" != "none" ] || exit 0
-}
-
-finish()
-{
-    lock -u $lockfile
-    rm -f $lockfile
-}
-
-# just one instance of this script at a time
-just_one_instance()
-{
-	local counter=0
-	local limit=10
-
-	#wait for the lock to become free
-	while [ -e $lockfile ] ; do
-		sleep 1
-		counter=$((counter + 1))
-		[ "$counter" -gt "$limit" ] && exit 1
-	done
-
-	lock $lockfile
-	trap finish EXIT INT TERM
-}
-
-
-#####
-##### helper functions
-#####
-
-#given a an ip and a mask in the form of "192.168.1.1/24"
-#return the network address like "192.168.1.0/24"
-get_network_address()
-{
-	local ip="$1"
-	[ -z "$ip" ] && return
-
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local mask=$((0xFFFFFFFF >> (32 - $prefix) << (32 - $prefix)))
-	local network=$(($ip & $mask))
-
-	local n1=$((($network & 0xFF000000) >> 24))
-	local n2=$((($network & 0x00FF0000) >> 16))
-	local n3=$((($network & 0x0000FF00) >> 8))
-	local n4=$(( $network & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4/$prefix"
-}
-
-#given a network address (192.168.1.0/24)
-#find the next network address (192.168.2.0/24)
-next_network_address()
-{
-	local ip=$1
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local one=$((1 << (32-$prefix)))
-	local new=$(($ip + $one))
-
-	local n1=$((($new & 0xFF000000) >> 24))
-	local n2=$((($new & 0x00FF0000) >> 16))
-	local n3=$((($new & 0x0000FF00) >> 8))
-	local n4=$(( $new & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4/$prefix"
-}
-
-# given a network address and a prefix (192.168.2.0/24)
-# return the first host ip available   (192.168.2.1)
-first_host_in_network ()
-{
-	local ip=$1
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local new=$(($ip + 1))
-
-	local n1=$((($new & 0xFF000000) >> 24))
-	local n2=$((($new & 0x00FF0000) >> 16))
-	local n3=$((($new & 0x0000FF00) >> 8))
-	local n4=$(( $new & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4"
-}
-
-# given a network address,
-# find the next available network address.
-shift_range()
-{
-	local net="$1"
-	while true ; do
-		if [ "$restricted_nets" == "${restricted_nets//$net/}" ] && [ "$all_nets" == "${all_nets//$net/}" ]; then
-			# found a net that is not in restricted nets nor in all nets
-			break
-		fi
-		net=$(next_network_address $net)
-	done
-
-	echo "$net"
-}
-
-
-#####
-##### parse all interfaces section
-#####
-
-# restricted_nets = all the IPs on wan interfaces
-# all_nets = all the IPs on any interface
-parse_interface()
-{
-	local interface=$1
-	local nets=""		# "192.168.1.1/24"
-	local networks=""	# "192.168.1.0/24"
-
-	config_get is_lan $interface is_lan
-	network_get_subnets nets $interface
-
-	for n in $nets ; do
-		networks="$networks $(get_network_address $n)"
-	done
-
-	[ "$is_lan" != "1" ] && restricted_nets="$restricted_nets $networks"
-	all_nets="$all_nets $networks"
-}
-
-# parse all the interfaces
-# get all the IPs on wan interfaces and store them in restrict_nets
-# get all the IPs on all interfaces and store them in all_nets
-parse_interfaces()
-{
-	config_foreach parse_interface "interface"
-}
-
-
-#####
-##### parse all lan interfaces section
-#####
-
-parse_lan()
-{
-	local interface=$1
-	local nets=""
-	local ips=""
-	local newips=""
-	local ips_changed=0
-
-	[ "$interface" == "loopback" ] && return
-	config_get is_lan $interface is_lan
-	[ "$is_lan" == "1" ] || return
-
-	network_get_subnets ips $interface
-
-	for ip in $ips ; do
-		net="$(get_network_address $ip)"
-
-		if [ "$restricted_nets" == "${restricted_nets//$net/}" ] ; then
-			# net is not in restricted nets
-			# append ip to newips
-			[ -z "$newips" ] && newips="${ip%/*}" ||  newips="$newips ${ip%/*}"
-			continue
-		fi
-
-		#net is in restricted_nets
-		local newnet=$(shift_range $net)
-		local newip="$(first_host_in_network $newnet)"
-		# append newip to newips
-		[ -z "$newips" ] && newips="$newip" ||  newips="$newips $newip"
-
-		ips_changed=1
-		logger "$0: Changing the ip on interface $interface from $ip to $newip/${newnet##*/}"
-		echo "$0: Changing the ip on interface $interface from $ip to $newip/${newnet##*/}" >/dev/console
-	done
-
-	#assign the new ips
-	if [ "$ips_changed" == "1" ] ; then
-		uci -q set network.$interface.ipaddr="$newips"
-	fi
-}
-
-# parse all the interface with is_lan=1
-parse_lans()
-{
-	config_foreach parse_lan "interface"
-}
-
-
-#####
-##### main
-#####
-
-main()
-{
-	initial_check
-	just_one_instance
-
-	config_load network
-	parse_interfaces
-	parse_lans
-
-	if [ -n "$(uci changes network)" ] ; then
-		ubus call uci commit '{"config":"network"}'
-	fi
-}
-
-main $@

inteno-netmodes/files/etc/hotplug.d/net/80-repeater

@@ -3,38 +3,24 @@
 . /lib/functions.sh
 include /lib/network
 
-ps | grep hotplug | grep button && exit
-
-MTK=0
-[ "$(db -q get hw.board.hardware)" == "EX400" ] && MTK=1
-
-WANDEV="$(uci get layer2_interface_ethernet.Wan.ifname)"
-[ $MTK -eq 1 ] && WANDEV="eth0.2"
-
-[ "$INTERFACE" != "$WANDEV" ] && exit
-
-defroute=$(ip route | grep default | awk '{print$3}')
+[ "$INTERFACE" != "$(uci get layer2_interface_ethernet.Wan.ifname)" ] && exit
 
 case "$(uci get netmode.setup.curmode)" in
-		repeater*)
-			echo "Preparing to switch mode"
-		;;
-		*)
-			ping -c 1 -w 5 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-			exit
-		;;
+		repeater|repeater_dualdown) echo "Preparing to switch mode" ;;
+		*) exit ;;
 esac
 
 get_wifi_wet_interface() {
-	handle_interface() {
-		config_get mode "$1" mode
-		if [ "$mode" == "sta" -o "$mode" == "wet" ] ; then
-			config_get ifname "$1" ifname
-			echo "$ifname"
-		fi
-	}
-	config_load wireless
-	config_foreach handle_interface wifi-iface
+#	handle_interface() {
+#		config_get mode "$1" mode
+#		if [ "$mode" == "wet" ] ; then
+#			config_get ifname "$1" ifname
+#			echo "$ifname"
+#		fi
+#	}
+#	config_load wireless
+#	config_foreach handle_interface wifi-iface "$device"
+	echo "wl1"
 }
 
 get_wifi_iface_cfgstr() {
@@ -43,60 +29,42 @@ get_wifi_iface_cfgstr() {
 		[ "$ifname" == "$2" ] && echo "wireless.$1"
 	}
 	config_load wireless
-	config_foreach get_cfgno wifi-iface $1
+	config_foreach get_cfgno wifi-iface $1 $2
 }
 
-link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
-[ $MTK -eq 1 ] && link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
-
 case "$ACTION" in
 	add|register)
-		[ "$link" == "down" ] && return
-		ubus call leds set  '{"state" : "allflash"}'
 		echo "Autoswitch to Extender mode" > /dev/console
 		sleep 2
-		wetif="$(get_wifi_wet_interface)"
 		# remove wifi client interface
 		case "$(uci get netmode.setup.curmode)" in
-			repeater*)
-				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=1
+			repeater_dualdown)
+				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).disabled=1
+			;;
+			repeater)
+				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).mode=ap
 			;;
 		esac
 		uci commit wireless
 		#add wan ethernet port
-		uci set network.wan.ifname="$(echo $WANDEV $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$wetif //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-		uci commit network
-		ubus call network reload
-		[ -f /usr/sbin/wlctl ] && wlctl -i $wetif bss down 2>/dev/null
-		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-		ubus call router.network reload
-		ubus call leds set  '{"state" : "normal"}'
+		uci set network.wan.ifname="$(echo $(uci get layer2_interface_ethernet.Wan.ifname) $(uci get network.wan.ifname) | tr ' ' '\n' | sort -u | tr '\n' ' ')"
+		ubus call uci commit '{"config":"network"}'
 	;;
 	remove|unregister)
-		[ "$link" == "up" ] && return
-		ubus call leds set  '{"state" : "allflash"}'
 		echo "Autoswitch to Repeater mode" > /dev/console
 		sleep 2
-		wetif="$(get_wifi_wet_interface)"
 		# add wifi client interface
 		case "$(uci get netmode.setup.curmode)" in
-			repeater*)
-				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=0
+			repeater_dualdown)
+				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).disabled=0
+			;;
+			repeater)
+				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).mode=wet
 			;;
 		esac
 		uci commit wireless
 		#remove wan ethernet port
-		uci set network.wan.ifname="$(echo $wetif $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$WANDEV //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-		uci commit network
-		ubus call network reload
-		[ -f /usr/sbin/wlctl ] && wlctl -i $wetif bss up 2>/dev/null
-		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || {
-			killall -9 wifi
-			wifi reload nodat
-			killall -USR1 udhcpc
-		}
-		ubus call router.network reload
-		ubus call leds set  '{"state" : "normal"}'
+		uci set network.wan.ifname="$(uci get network.wan.ifname | sed 's/$/ /' | sed -r "s/`uci get layer2_interface_ethernet.Wan.ifname` //g")"
+		ubus call uci commit '{"config":"network"}'
 	;;
 esac
-

inteno-netmodes/files/etc/init.d/netmode

@@ -3,9 +3,6 @@
 START=10
 USE_PROCD=1
 
-TMPDIR=/var/netmodes
-OLD_MODE_FILE=/var/netmodes/old_mode
-
 . /usr/share/libubox/jshn.sh
 . /lib/network/config.sh
 
@@ -44,29 +41,13 @@ get_device() {
 
 populate_netmodes() {
 	[ -f /etc/config/netmode -a -d $modedir ] || return
-	local curmode
-
-	config_load netmode
-
-	config_get curmode setup curmode
-
-	mkdir -p $TMPDIR
-
-	if [ "$curmode" == "routed" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="routed_mtk"
-		else
-			curmode="routed_brcm"
-		fi
-	fi
-
-	echo $curmode > $OLD_MODE_FILE
 
 	delete_netmode() {
 		uci delete netmode.$1
 	}
 
+	config_load netmode
+
 	config_foreach delete_netmode netmode
 	uci commit netmode
 
@@ -78,21 +59,11 @@ populate_netmodes() {
 	lan5=$(get_device LAN5)
 
 	for file in $(find $modedir -type f); do
-		conf="$(echo $file | cut -d'/' -f5)"
-		if [ "$conf" == "layer2_interface_ethernet" ]; then
-			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-		fi
-		if [ "$conf" == "network" ]; then
-			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-			grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
-			grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
-			grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
-			grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
-
-			ifname="$(uci -q get $file.wan.ifname | sed 's/[ \t]*$//')"
-			uci -q set $file.wan.ifname="$ifname"
-			uci -q commit $file
-		fi
+		grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
+		grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
+		grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
+		grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
+		grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
 	done
 
 	local hardware=$(db get hw.board.hardware)
@@ -101,7 +72,7 @@ populate_netmodes() {
 
 			case "$mode" in
 				repeater*)
-					wlctl -i wl1 ap >/dev/null 2>&1 || ifconfig rai0 2>/dev/null | grep -q rai0 || continue
+					wlctl -i wl1 ap >/dev/null 2>&1 || continue
 				;;
 			esac
 
@@ -109,6 +80,7 @@ populate_netmodes() {
 			desc=""
 			exp=""
 			uci -q set netmode.$mode=netmode
+			uci -q set netmode.$mode.conf=$mode
 			json_load "$(cat $modedir/$mode/DETAILS)"
 
 			if json_select excluded_boards; then
@@ -165,159 +137,36 @@ populate_netmodes() {
 
 			json_get_var cred credentials
 			uci -q set netmode.$mode.askcred="$cred"
-			json_get_var ulb uplink_band
-			uci -q set netmode.$mode.uplink_band="$ulb"
 			json_get_var reboot reboot
 			uci -q set netmode.$mode.reboot="$reboot"
 	done
-
-	config_get curmode setup curmode
-	[ -d /etc/netmodes/$curmode ] || {
-		[ "$(db -q get hw.board.hardware)" == "EX400" ] && uci -q set netmode.setup.curmode="routed_mtk" || uci -q set netmode.setup.curmode="routed_brcm"
-	}
-
 	uci commit netmode
 }
 
 switch_netmode() {
 	[ -f /etc/config/netmode -a -d $modedir ] || return
 
-	local netreload="$1"
-	local curmode conf repeaterready old_mode
-
 	config_load netmode
 
 	config_get curmode setup curmode
-
-	config_get repeaterready setup repeaterready "0"
-	if [ "$repeaterready" == "1" ] ; then
-		uci -q set netmode.setup.repeaterready="0"
-		uci commit netmode
-	fi
-
-	if [ "$curmode" == "repeater" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="repeater_mtk_5g_up_dual_down"
-		else
-			curmode="repeater_brcm_2g_up_dual_down"
-		fi
-		uci set netmode.setup.curmode="$curmode"
-		uci commit netmode
-	fi
-	if [ "$curmode" == "routed" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="routed_mtk"
-		else
-			curmode="routed_brcm"
-		fi
-		uci set netmode.setup.curmode="$curmode"
-		uci commit netmode
-	fi
-
-	old_mode=`cat $OLD_MODE_FILE 2>/dev/null`
-
-        # if curmode has not changed do not copy configs
-        if [ "$curmode" == "$old_mode" ]; then
-                /etc/init.d/enviroment reload
-                return
-        fi
-
-        echo $curmode >$OLD_MODE_FILE
-
-	[ -d "/etc/netmodes/$curmode" ] || return
-	cp /etc/netmodes/$curmode/* /etc/config/
+	config_get conf $curmode conf
+	cp /etc/netmodes/$conf/* /etc/config/
 	rm -f /etc/config/DETAILS
 	sync
 	local reboot=$(uci -q get netmode.$curmode.reboot)
-	local askcred=$(uci -q get netmode.$curmode.askcred)
 	if [ "$reboot" == "0" ]; then
 		/etc/init.d/enviroment reload
-		case "$curmode" in
-			routed*)
-				ubus call uci commit '{"config":"network"}'
-			;;
-			repeater*)
-				if [ -f /etc/init.d/omcproxy ]; then
-					/etc/init.d/omcproxy stop
-				fi
-				if [ "$netreload" != "0" ]; then
-					ubus call uci commit '{"config":"network"}'
-				fi
-			;;
-		esac
 	else
 		reboot &
 	fi
 }
 
-start_client_listener() {
-	local curmode repeaterready ulcpid
-
-	config_load netmode
-	config_get repeaterready setup repeaterready 0
-
-	ulcpid=$(ps | grep "ubus listen client" | grep -v grep | awk '{print$1}')
-
-	[ $repeaterready -eq 1 ] && {
-		killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-		kill -9 $ulcpid >/dev/null 2>&1
-		return
-	}
-
-	config_get curmode setup curmode
-
-	case "$curmode" in
-		repeater*)
-			killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-			kill -9 $ulcpid >/dev/null 2>&1
-		;;
-		*)
-			pidof netmode-client-detect || /sbin/netmode-client-detect &
-		;;
-	esac
-}
-
-start_netmode_discover() {
-	local curmode repeaterready
-
-	killall -9 netmode-discover >/dev/null 2>&1
-
-	config_load netmode
-	config_get repeaterready setup repeaterready 0
-
-	[ $repeaterready -eq 1 ] && return
-
-	config_get curmode setup curmode
-
-	case "$curmode" in
-		repeater*)
-			/sbin/netmode-discover &
-		;;
-	esac
-}
-
 start_service() {
 	populate_netmodes
-	start_client_listener
-	start_netmode_discover
 }
 
 reload_service() {
-        switch_netmode "$1"
-
-	# set default JUCI page to overview
-	uci -q set juci.juci.homepage="overview"
-	uci commit juci
-
-	start_client_listener
-	start_netmode_discover
-}
-
-stop_service() {
-	killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-	killall -9 netmode-discover >/dev/null 2>&1
+        switch_netmode
 }
 
 service_triggers()

inteno-netmodes/files/etc/netmodes/bridged/DETAILS

@@ -10,8 +10,7 @@
 	"credentials" : 0,
 	"excluded_boards" : [
 		"CG300",
-		"CG301",
-		"EX400"
+		"CG301"
 	],
 	"acl" : [
 		"admin",

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_adsl

@@ -0,0 +1,23 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm1.1'
+        option baseifname 'atm1'
+        option atmtype 'ubr'
+        option name 'atm_tv'
+        option vpi '8'
+        option vci '45'
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vlan

@@ -0,0 +1,18 @@
+
+
+config 'vlan_interface'
+	option name 'eth_tv'
+	option ifname '$WAN.100'
+	option baseifname '$WAN'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'vdsl_tv'
+	option ifname 'ptm0.100'
+	option baseifname 'ptm0'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+

inteno-netmodes/files/etc/netmodes/bridged/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS

@@ -10,9 +10,7 @@
 	"credentials" : 0,
 	"excluded_boards" : [
 		"CG300",
-		"CG301",
-		"EX400",
-		"F*"
+		"CG301"
 	],
 	"acl" : [
 		"admin",

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_adsl

@@ -0,0 +1,34 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm1.1'
+        option baseifname 'atm1'
+        option atmtype 'ubr'
+        option name 'atm_tv'
+        option vpi '8'
+        option vci '45'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm2.1'
+        option baseifname 'atm2'
+        option atmtype 'ubr'
+        option name 'atm_voip'
+        option vpi '8'
+        option vci '55'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vlan

@@ -0,0 +1,32 @@
+
+
+config 'vlan_interface'
+	option name 'eth_tv'
+	option ifname '$WAN.100'
+	option baseifname '$WAN'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'eth_voip'
+	option ifname '$WAN.200'
+	option baseifname '$WAN'
+	option vlan8021q '200'
+	option vlan8021p '0'
+
+config 'vlan_interface'
+	option name 'vdsl_tv'
+	option ifname 'ptm0.100'
+	option baseifname 'ptm0'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'vdsl_voip'
+	option ifname 'ptm0.200'
+	option baseifname 'ptm0'
+	option vlan8021q '200'
+	option vlan8021p '0'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'

inteno-netmodes/files/etc/netmodes/repeater/DETAILS

@@ -10,11 +10,11 @@
 	"excluded_boards" : [
 		"DG15*",
 		"DG40*",
-		"EG40*",
-		"EX40*",
-		"F*"
+		"EG40*"
+	],
+	"acl" : [
+		"admin"
 	],
-	"uplink_band" : "b",
 	"credentials" : 1,
 	"reboot" : 0
 }

inteno-netmodes/files/etc/netmodes/repeater/firewall

@@ -11,7 +11,6 @@ config defaults
 
 config zone
 	option name		lan
-	list   network		'lan'
 	option input		ACCEPT
 	option output		ACCEPT
 	option forward		ACCEPT
@@ -19,7 +18,6 @@ config zone
 config zone
 	option name		wan
 	list   network		'wan'
-	list   network		'wan6'
 	option input		REJECT
 	option output		ACCEPT
 	option forward		REJECT
@@ -39,6 +37,16 @@ config rule
 	option dest_port	68
 	option target		ACCEPT
 	option family		ipv4
+	option hidden		1
+
+config rule
+	option name		Repeater-Management
+	option src		wan
+	option proto		tcp
+	option dest_port	'22 80 8080 8181 9876'
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
 
 # Allow IPv4 ping
 config rule
@@ -48,13 +56,7 @@ config rule
 	option icmp_type	echo-request
 	option family		ipv4
 	option target		ACCEPT
-
-config rule
-	option name		Allow-IGMP
-	option src		wan
-	option proto		igmp
-	option family		ipv4
-	option target		ACCEPT
+	option hidden		1
 
 # Allow DHCPv6 replies
 # see https://dev.openwrt.org/ticket/10381
@@ -68,24 +70,13 @@ config rule
 	option dest_port	546
 	option family		ipv6
 	option target		ACCEPT
-
-config rule
-	option name		Allow-MLD
-	option src		wan
-	option proto		icmp
-	option src_ip		fe80::/10
-	list icmp_type		'130/0'
-	list icmp_type		'131/0'
-	list icmp_type		'132/0'
-	list icmp_type		'143/0'
-	option family		ipv6
-	option target		ACCEPT
+	option hidden		1
 
 # Allow essential incoming IPv6 ICMP traffic
 config rule
 	option name		Allow-ICMPv6-Input
 	option src		wan
-	option proto	icmp
+	option proto		icmp
 	list icmp_type		echo-request
 	list icmp_type		echo-reply
 	list icmp_type		destination-unreachable
@@ -100,6 +91,7 @@ config rule
 	option limit		1000/sec
 	option family		ipv6
 	option target		ACCEPT
+	option hidden		1
 
 # Allow essential forwarded IPv6 ICMP traffic
 config rule
@@ -117,37 +109,15 @@ config rule
 	option limit		1000/sec
 	option family		ipv6
 	option target		ACCEPT
-
-# allow IPsec/ESP and ISAKMP passthrough
-config rule
-	option src		wan
-	option dest		lan
-	option proto		esp
-	option target		ACCEPT
-
-config rule
-	option src		wan
-	option dest		lan
-	option dest_port	500
-	option proto		udp
-	option target		ACCEPT
-
-config dmz dmz
-	option enabled '0'
-	option exclude_ports '5060 7547'
+	option hidden		1
 
 # include a file with users custom iptables rules
 config include
 	option path /etc/firewall.user
 	option reload 1
 
-# include a file with rules for prioritizing some specific packets
+# include a file with rules for SIP and RTP traffic
 config include
-	option path /etc/firewall.qos
-	option reload 1
-
-# include a file with rules for DMZ Host
-config include dmzhost
-	option path /etc/firewall.dmz
+	option path /etc/firewall.sip
 	option reload 1
 

inteno-netmodes/files/etc/netmodes/repeater/network

@@ -9,7 +9,8 @@ config interface 'loopback'
 config interface 'wan'
 	option type 'bridge'
 	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
+	option vendorid 'Inteno_Repeater_$MAC4'
+	option hostname 'Inteno_Repeater_$MAC4'
 	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
 	option reqopts '43'
 

inteno-netmodes/files/etc/netmodes/repeater/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -34,7 +27,7 @@ config wifi-device 'wl0'
 	option rifs '0'
 	option rifs_advert '0'
 	option maxassoc '32'
-	option beamforming '1'
+	option beamforming '0'
 	option doth '1'
 	option dfsc '1'
 

inteno-netmodes/files/etc/netmodes/repeater_dualdown/DETAILS

@@ -10,11 +10,11 @@
 	"excluded_boards" : [
 		"DG15*",
 		"DG40*",
-		"EG40*",
-		"EX40*",
-		"F*"
+		"EG40*"
+	],
+	"acl" : [
+		"admin"
 	],
-	"uplink_band" : "b",
 	"credentials" : 1,
 	"reboot" : 0
 }

inteno-netmodes/files/etc/netmodes/repeater_dualdown/firewall

@@ -0,0 +1,123 @@
+config settings 'settings'
+        option disabled '0'
+
+config defaults
+	option syn_flood	1
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		REJECT
+# Uncomment this line to disable ipv6 rules
+#	option disable_ipv6	1
+
+config zone
+	option name		lan
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		ACCEPT
+
+config zone
+	option name		wan
+	list   network		'wan'
+	option input		REJECT
+	option output		ACCEPT
+	option forward		REJECT
+	option masq		1
+	option mtu_fix		1
+
+config forwarding
+	option src		lan
+	option dest		wan
+
+# We need to accept udp packets on port 68,
+# see https://dev.openwrt.org/ticket/4108
+config rule
+	option name		Allow-DHCP-Renew
+	option src		wan
+	option proto		udp
+	option dest_port	68
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
+
+config rule
+	option name		Repeater-Management
+	option src		wan
+	option proto		tcp
+	option dest_port	'22 80 8080 8181 9876'
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
+
+# Allow IPv4 ping
+config rule
+	option name		Allow-Ping
+	option src		wan
+	option proto		icmp
+	option icmp_type	echo-request
+	option family		ipv4
+	option target		ACCEPT
+	option hidden		1
+
+# Allow DHCPv6 replies
+# see https://dev.openwrt.org/ticket/10381
+config rule
+	option name		Allow-DHCPv6
+	option src		wan
+	option proto		udp
+	option src_ip		fe80::/10
+	option src_port		547
+	option dest_ip		fe80::/10
+	option dest_port	546
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential incoming IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Input
+	option src		wan
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	list icmp_type		router-solicitation
+	list icmp_type		neighbour-solicitation
+	list icmp_type		router-advertisement
+	list icmp_type		neighbour-advertisement
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential forwarded IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Forward
+	option src		wan
+	option dest		*
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# include a file with users custom iptables rules
+config include
+	option path /etc/firewall.user
+	option reload 1
+
+# include a file with rules for SIP and RTP traffic
+config include
+	option path /etc/firewall.sip
+	option reload 1
+

inteno-netmodes/files/etc/netmodes/repeater_dualdown/network

@@ -9,7 +9,8 @@ config interface 'loopback'
 config interface 'wan'
 	option type 'bridge'
 	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
+	option vendorid 'Inteno_Repeater_$MAC4'
+	option hostname 'Inteno_Repeater_$MAC4'
 	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
 	option reqopts '43'
 

inteno-netmodes/files/etc/netmodes/repeater_dualdown/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -34,7 +27,7 @@ config wifi-device 'wl0'
 	option rifs '0'
 	option rifs_advert '0'
 	option maxassoc '32'
-	option beamforming '1'
+	option beamforming '0'
 	option doth '1'
 	option dfsc '1'
 

inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/DETAILS

@@ -1,17 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾2.4&5" },
-		{ "sv" : "Repeater 2.4▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"*G*",
-		"F*"
-	],
-	"uplink_band" : 'b',
-	"credentials" : 1,
-	"reboot" : 0
-}

inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/network

@@ -1,41 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-
-config interface 'wan'
-	option type 'bridge'
-	option ifname 'eth0.2 eth0.1'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option reqopts '66 67 128 224'
-	option igmp_snooping '0'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-

inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/owsd

@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-

inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/wireless

@@ -1,59 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  auto
-	option bandwidth '20'
-	option hwmode   auto
-	option htmode   HT20
-	option country 'DE'
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	ra0
-	option wps_pbc	1
-
-config wifi-device  rai0
-	option band a
-	option channel  auto
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 1
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	rai0
-	option wps_pbc	1
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     wet
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	apcli0
-

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS

@@ -1,17 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 5▴▾2.4&5" },
-		{ "sv" : "Repeater 5▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 5G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 5G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"*G*",
-		"F*"
-	],
-	"uplink_band" : 'a',
-	"credentials" : 1,
-	"reboot" : 0
-}

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/network

@@ -1,41 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-
-config interface 'wan'
-	option type 'bridge'
-	option ifname 'eth0.2 eth0.1'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option reqopts '66 67 128 224'
-	option igmp_snooping '0'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/owsd

@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -1,59 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  auto
-	option bandwidth '20'
-	option hwmode   auto
-	option htmode   HT20
-	option country 'DE'
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	ra0
-	option wps_pbc	1
-
-config wifi-device  rai0
-	option band a
-	option channel  auto
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 1
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	rai0
-	option wps_pbc	1
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     wet
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	apclii0
-

inteno-netmodes/files/etc/netmodes/routed/DETAILS

@@ -7,9 +7,6 @@
 		{ "en" : "" },
 		{ "sv" : "" }
 	],
-	"excluded_boards" : [
-		"EX4*"
-	],
 	"credentials" : 0
 }
 

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/routed/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'

inteno-netmodes/files/etc/netmodes/routed_mtk/DETAILS

@@ -1,17 +0,0 @@
-{
-	"description": [
-		{ "en" : "Fully Routed (NAT)" },
-		{ "sv" : "Fullt Omdirigerad (NAT)" }
-	],
-	"explanation": [
-		{ "en" : "" },
-		{ "sv" : "" }
-	],
-	"excluded_boards" : [
-		"*G*",
-		"F*"
-	],
-	"reboot" : 0,
-	"credentials" : 0
-}
-

inteno-netmodes/files/etc/netmodes/routed_mtk/dhcp

@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-

inteno-netmodes/files/etc/netmodes/routed_mtk/network

@@ -1,47 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option type 'bridge'
-	option proto 'static'
-	option is_lan '1'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ip6assign '60'
-	option ifname 'eth0.1 ra0 rai0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-
-config interface 'wan'
-	option ifname 'eth0.2'
-	option proto 'dhcp'
-	option reqopts '66 67 128 224'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-

inteno-netmodes/files/etc/netmodes/routed_mtk/omcproxy

@@ -1,10 +0,0 @@
-config proxy
-	option scope global
-	option uplink wan
-	list downlink lan
-
-config proxy
-	option scope global
-	option uplink wan6
-	list downlink lan
-

inteno-netmodes/files/etc/netmodes/routed_mtk/wireless

@@ -1,48 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  auto
-	option bandwidth '20'
-	option hwmode   auto
-	option htmode   HT20
-	option country 'DE'
-
-config wifi-iface
-	option device   ra0
-	option network  lan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option wps_pbc	1
-
-config wifi-device  rai0
-	option band a
-	option channel  auto
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 1
-
-config wifi-iface
-	option device   rai0
-	option network  lan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option wps_pbc	1
-

inteno-netmodes/files/sbin/netmode-client-detect

@@ -1,56 +0,0 @@
-#!/bin/sh
-
-# receive new client events
-# and trigger wificontrol in --router mode for that client
-
-. /usr/share/libubox/jshn.sh
-
-local action ipaddr macaddr network
-
-timed_check() {
-	while true; do
-		network=${network:-lan}
-		ubus call repeater get_creds '{"network":"'$network'","file":"/tmp/wificontrol.txt"}'
-		wificontrol --router
-		sleep $1
-	done
-}
-
-is_inteno_macaddr()
-{
-	macaddr=$1
-
-	echo $macaddr | grep -i -e "^00:22:07" \
-				-e "^02:22:07" \
-				-e "^44:D4:37" \
-				-e "^00:0C:07" \
-				-e "^02:0C:07" \
-				-e "^06:0C:07" \
-				-e "^00:0C:43" \
-				-e "^02:0C:43" \
-				-e "^06:0C:43" \
-	&& return
-	false
-}
-
-timed_check 60 &
-
-while true ; do
-	ubus listen client | \
-	while read event ; do
-		#echo "netmode-client-detect got event: $event" >/dev/console
-		json_load "$event"
-		json_select client
-		json_get_var action action
-		[ "$action" == "connect" ] || continue
-		json_get_var macaddr macaddr
-		json_get_var ipaddr ipaddr
-		json_get_var network network "lan"
-
-		if is_inteno_macaddr $macaddr; then
-			echo "netmode-client-detect: a new Inteno device detected on '$network' network (MACAddr:$macaddr IPAddr:$ipaddr)" >/dev/console
-			ubus call repeater get_creds '{"network":"'$network'","file":"/tmp/wificontrol.txt"}'
-			/sbin/wificontrol --router --destination $ipaddr
-		fi
-	done
-done

inteno-netmodes/files/sbin/netmode-conf

@@ -1,288 +0,0 @@
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-state="exit"
-TMPPATH="/tmp/netmode_config_backup"
-CURMODE=""
-SLEEPTIME=300
-
-set_wireless_values() {
-	local iface_num="$1"
-	local ssid="$2"
-	local key="$3"
-	local encryption="$4"
-	local device="$5"
-	local old_ssid old_key old_encryption
-	if ! uci -q get wireless.@wifi-iface[$iface_num] >/dev/null 2>&1; then
-		state="reload"
-		uci add wireless wifi-iface >/dev/null 2>&1
-		uci set wireless.@wifi-iface[$iface_num].device="$device"
-	fi
-	local network="$(uci -q get wireless.@wifi-iface[$iface_num].network)"
-	old_ssid="$(uci -q get wireless.@wifi-iface[$iface_num].ssid)"
-	old_key="$(uci -q get wireless.@wifi-iface[$iface_num].key)"
-	old_encryption="$(uci -q get wireless.@wifi-iface[$iface_num].encryption)"
-	if [ "$old_ssid" != "$ssid" -o "$old_encryption" != "$encryption" -o "$old_key" != "$key" -o -z "$network" ]; then
-		#TODO: get network dynamicaly
-		[ "$state" == "exit" ] && state="apply"
-		[ -z "$network" ] && network="wan"
-		uci set wireless.@wifi-iface[$iface_num].network="$network"
-		uci set wireless.@wifi-iface[$iface_num].ssid="$ssid"
-		uci set wireless.@wifi-iface[$iface_num].key="$key"
-		uci set wireless.@wifi-iface[$iface_num].encryption="$encryption"
-	fi
-}
-
-get_wifi_device_from_band(){
-	local section="$1"
-	local band="$2"
-	local __ret="$3"
-	local b
-	config_get b $section "band"
-	if [ "$band" == "$b" ]; then
-		eval "export -- \"$__ret=$section\""
-	fi
-}
-
-get_device(){
-	local band="$1"
-	config_foreach get_wifi_device_from_band "wifi-device" "$band" "$2"
-}
-
-get_iface_num() {
-	local device="$1"
-	local prev="$2"
-	local __save="$3"
-	local i=0
-	local dev
-	while true; do
-		[ $i -gt 100 ] && break ## just a safty messure
-		if ! uci -q get wireless.@wifi-iface[$i] >/dev/null; then
-			break
-		fi
-		mode="$(uci -q get wireless.@wifi-iface[$i].mode)"
-		if [ "$mode" == "wet" -o "$mode" == "sta" ]; then
-			i=$((i+1))
-			continue
-		fi
-		dev="$(uci -q get wireless.@wifi-iface[$i].device)"
-		if [ "$dev" != "$device" ]; then
-			[ -z "$dev" ] && break
-			i=$((i+1))
-		elif [ $prev -ne 0 ]; then
-			i=$((i+1))
-			prev=$((prev-1))
-		else
-			break
-		fi
-	done
-	eval "export -- \"$__save=$i\""
-}
-
-restore() {
-	if [ "$1" == "back" ]; then
-		uci set juci.juci.homepage='netmode-wizard'
-		uci commit juci
-		cp $TMPPATH/* /etc/config/
-		uci set netmode.setup.curmode=$CURMODE
-		uci commit netmode
-		ubus call network reload
-		wifi reload
-		ubus call router.network reload
-	fi
-	rm -r $TMPPATH
-	ubus call leds set '{"state":"normal"}'
-}
-
-backup() {
-	mkdir -p $TMPPATH
-	cp /etc/config/* $TMPPATH/
-	CURMODE="$(uci -q get netmode.setup.curmode)"
-	ubus call leds set '{"state":"allflash"}'
-}
-
-###### START HERE #######
-
-file="$1"
-from_gui="$2"
-
-[ -f "$file" ] || exit
-
-# let netmode-handler up to 20 seconds to finish switching mode
-for tm in 2 4 6 8; do
-	if [ ! -f /tmp/switching_mode ]; then
-		break
-	fi
-	sleep $tm
-done
-
-[ "$from_gui" == "true" ] && backup
-
-json_load "`cat $file`"
-json_select "wifi_ifaces"
-
-local curmode repmode
-config_load netmode
-config_get curmode setup curmode
-
-case $curmode in
-	*repeater*)
-	;;
-	*)
-		uci set netmode.setup.curmode="repeater"
-		uci commit netmode
-		/etc/init.d/netmode reload
-		curmode="$(uci -q get netmode.setup.curmode)"
-	;;
-esac
-
-local apcliband="a"
-case $curmode in
-	*_2g_*) apcliband="b";;
-esac
-
-i=1
-
-local dummy band ssid key encryption device iface_num
-
-while json_get_var dummy $i; do
-	json_select $i
-	json_get_var band band
-	[ "$band" == "" -o "$apcliband" == "$band" ] && break
-	json_select ..
-	i=$((i+1))
-done
-
-[ "$apcliband" == "$band" -o "$band" == "" ] || {
-	[ "$from_gui" == "true" ] && restore "back"
-	exit
-}
-
-repeater_iface_num=$(uci -q show wireless | grep -e ".mode='wet'" -e ".mode='sta'"  | sed 's/.*\[\([0-9]\)\].*/\1/')
-
-[ -z "$repeater_iface_num" ] && {
-	[ "$from_gui" == "true" ] && restore "back"
-	exit
-}
-
-json_get_var ssid ssid
-json_get_var key key
-json_get_var encryption encryption
-
-set_wireless_values "$repeater_iface_num" "$ssid" "$key" "$encryption"
-
-json_load "`cat $file`"
-json_select "wifi_ifaces"
-
-config_load wireless
-local b_num=0
-local a_num=0
-
-i=1
-while json_get_var dummy $i; do
-	json_select $i
-	json_get_var band band
-	json_get_var ssid ssid
-	json_get_var encryption encryption
-	json_get_var key key
-	if [ "$band" == "" ]; then
-		get_device "a" device
-		get_iface_num "$device" "$a_num" iface_num
-		a_num=$((a_num+1))
-		[ -z $iface_num ] && {
-			[ "$from_gui" == "true" ] && restore "back"
-			exit
-		}
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-		get_device "b" device
-                get_iface_num "$device" "$b_num" iface_num
-                b_num=$((b_num+1))
-                [ -z $iface_num ] && {
-                        [ "$from_gui" == "true" ] && restore "back"
-                        exit
-                }
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-	else
-		get_device "$band" device
-		case $band in
-			a)
-				get_iface_num "$device" "$a_num" iface_num
-				a_num=$((a_num+1))
-				;;
-			b)
-				get_iface_num "$device" "$b_num" iface_num
-				b_num=$((b_num+1))
-				;;
-		esac
-		[ -z $iface_num ] && {
-			[ "$from_gui" == "true" ] && restore "back"
-			exit
-		}
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-	fi
-	i=$((i+1))
-	json_select ..
-done
-
-i=$((b_num + a_num + 1))
-
-if [ $repeater_iface_num -gt $i ]; then
-	i=$((i-1))
-fi
-
-while uci -q get wireless.@wifi-iface[$i] >/dev/null; do
-	# if repeater_iface_num is greater than the number of
-	# configured downlink we need to make sure its not deleted
-	local mode="$(uci -q get wireless.@wifi-iface[$i].mode)"
-	if [ "$mode" == "wet" -o "$mode" == "sta" ]; then
-		i=$((i+1))
-		continue
-	fi
-	state="reload"
-	uci -q delete wireless.@wifi-iface[$i] >/dev/null
-	# do not increment i. The next interface will now
-	# have the same index as the deleted interface
-done
-
-uci commit wireless
-
-if [ "$from_gui" == "true" ]; then
-	# check for connectivity
-	wifi reload
-	[ -f /etc/init.d/layer2_interface_ethernet -a -f /etc/config/layer2_interface_ethernet ] && /etc/init.d/layer2_interface_ethernet reload
-	i=$SLEEPTIME;
-
-	while [ $i -gt 0 ]; do
-		ip=`route -n | awk '/^0.0.0.0/{print $2}'`
-		if [ "$ip" == "" ]; then
-			i=$((i-10))
-			sleep 10
-			continue
-		fi
-		ping -w1 $ip
-		if [ $? -eq 0 ]; then
-			restore
-			exit
-		else
-			i=$((i-10))
-			sleep 9
-		fi
-	done
-	restore "back"
-else
-	if [ "$state" == "exit" ]; then
-		return
-	fi
-	ubus call leds set '{"state":"allflash"}'
-	if [ "$state" == "apply" ]; then
-		# wifi apply
-		wifi reload
-	else
-		# wifi reload
-		wifi reload
-	fi
-	[ -f /etc/init.d/layer2_interface_ethernet -a -f /etc/config/layer2_interface_ethernet ] && /etc/init.d/layer2_interface_ethernet reload
-	ubus call leds set '{"state":"normal"}'
-fi

inteno-netmodes/files/sbin/netmode-discover

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-local unlisted mac ipaddr netmask mask
-
-mask_to_cidr() {
-    nbits=0
-    IFS=.
-    for dec in $1 ; do
-        case $dec in
-            255) let nbits+=8;;
-            254) let nbits+=7;;
-            252) let nbits+=6;;
-            248) let nbits+=5;;
-            240) let nbits+=4;;
-            224) let nbits+=3;;
-            192) let nbits+=2;;
-            128) let nbits+=1;;
-            0);;
-            *) echo "Error: $dec is not recognised"; exit 1
-        esac
-    done
-    echo "$nbits"
-}
-
-while true; do
-	unlisted=0
-
-	ps | grep -q wifi | grep -q reload || {
-		for mac in $(brctl showmacs br-wan 2>/dev/null | tail -n +2 | grep no | awk '{print$2}'); do
-			grep -q "$mac" /proc/net/arp || unlisted=$((unlisted+1))
-		done
-
-		ipaddr=$(ifconfig br-wan | grep -v inet6 | grep inet | tr ':' ' ' | awk '{print$3}')
-		netmask=$(ifconfig br-wan | grep -v inet6 | grep inet | tr ':' ' ' | awk '{print$7}')
-		mask=$(mask_to_cidr $netmask)
-	}
-
-	if [ $unlisted -gt 0 -a -n "$ipaddr" -a -n "$netmask" ]; then
-		fping -c 1 -t 1000 -g $ipaddr/$mask -q >/dev/null 2>&1
-	fi
-
-	sleep 20
-done
-

inteno-netmodes/files/sbin/netmode-repeater-correction

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-MTK=0
-[ "$(db -q get hw.board.hardware)" == "EX400" ] && MTK=1
-
-if [ $MTK -eq 1 ]; then
-	WANDEV="eth0.2"
-	link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
-else
-	WANDEV="$(uci get layer2_interface_ethernet.Wan.ifname)"
-	link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
-fi
-
-[ "$link" == "up" ] && action=add
-[ "$link" == "down" ] && action=remove
-[ -z "$action" ] && exit
-
-# trigger a fake hotplug net event
-INTERFACE=$WANDEV ACTION=$action /sbin/hotplug-call net

inteno-netmodes/files/usr/libexec/rpcd/repeater

@@ -1,141 +0,0 @@
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-get_if_creds() {
-	local section=$1
-	local network=$2
-	local net dev ssid key encryption band
-	config_get net $section "network" "lan"
-	if [ "$net" == "$network" ]; then
-		config_get dev $section "device"
-		band="$(uci -q get wireless.$dev.band)"
-		config_get ssid $section ssid
-		config_get key $section key
-		config_get encryption $section encryption
-		config_get disabled $section disabled 0
-		[ $disabled -eq 1 ] && return
-		[ "$ssid" == "" -o "$band" == "" ] && return
-		json_add_object
-		json_add_string "ssid" "$ssid"
-		json_add_string "band" "$band"
-		json_add_string "key" "$key"
-		json_add_string "encryption" "$encryption"
-		json_close_object
-	fi
-}
-
-validate_file() {
-	local file="$1"
-	local real="$(readlink -f `dirname $file`)"
-	real="${real}/`basename $file`"
-	case "$real" in
-		/tmp/*)
-			touch $real && return 0 || return 1
-		;;
-		*)
-			return 1
-		;;
-	esac
-}
-
-write_error(){
-	json_init
-	json_add_string "status" "error: $1"
-	json_dump
-	exit 1
-}
-
-duplicate_if_single_radio() {
-	json_select "wifi-ifaces"
-	local i=1
-	local dummy band dup_band num_radios
-
-	num_radios="$(uci -q show wireless | grep wifi-device | wc -l)"
-
-	[ "$num_radios" == "2" ] && return
-
-	band="$(uci -q get wireless.@wifi-device[0].band)"
-
-	[ "$band" == "a" ] && dup_band="b"
-	[ "$band" == "b" ] && dup_band="a"
-	[ -z "$dup_band" ] && return
-
-
-	while json_get_var dummy $i; do
-		i=$((i+1))
-	done
-	i=$((i-1))
-	local ssid key encryption
-	while [ $i -gt 0 ]; do
-		json_select $i
-		json_get_var ssid ssid
-		json_get_var key key
-		json_get_var encryption encryption
-		json_select ..
-		json_add_object
-		json_add_string "ssid" "$ssid"
-		json_add_string "band" "$dup_band"
-		json_add_string "key" "$key"
-		json_add_string "encryption" "$encryption"
-		json_close_object
-		i=$((i-1))
-	done
-}
-
-case "$1" in
-	list)
-		echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
-	;;
-	call)
-		case "$2" in
-			get_creds)
-				#TODO: if not routed exit
-				local curmode="$(uci -q get netmode.setup.curmode)"
-				case $curmode in
-					*repeater*) write_error "not in repeater mode";;
-				esac
-				local network file input
-				read input
-				json_load $input
-				json_get_var network network
-				json_get_var file file
-
-				json_init
-				json_add_array "wifi-ifaces"
-				config_load wireless
-				config_foreach get_if_creds "wifi-iface" "$network"
-				json_close_array
-
-				duplicate_if_single_radio
-
-				if [ "$file" == "" ]; then
-					json_dump
-				else
-					validate_file $file && json_dump -i >$file || write_error "invalid filename (\"$file\"), file must be in /tmp/ and in an existing directory"
-				fi
-				json_init
-				json_add_string "status" success
-				json_dump
-			;;
-			set_creds)
-				local file from_gui
-				read input
-				json_load "$input"
-				json_get_var file file
-				json_get_var from_gui from_gui
-				validate_file "$file" || write_error "invalid filename (\"$file\"), file must be in /tmp and exist"
-				json_load "`cat $file`" || write_error "invalid file content"
-				json_select "wifi_ifaces" || write_error "invalid file content"
-
-
-				json_init
-				json_add_string "status" success
-				json_dump
-
-				netmode-conf "$file" "$from_gui" >/dev/null 2>&1 &
-			;;
-		esac
-	;;
-esac

iop/configs/config

@@ -47,7 +47,7 @@ CONFIG_PACKAGE_juci-broadcom-ethernet=y
 CONFIG_PACKAGE_juci-broadcom-iptv=y
 CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
 CONFIG_PACKAGE_juci-broadcom-vlan=y
-CONFIG_PACKAGE_juci-wireless=y
+CONFIG_PACKAGE_juci-broadcom-wl=y
 CONFIG_PACKAGE_juci-broadcom-xdsl=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
@@ -56,11 +56,10 @@ CONFIG_PACKAGE_juci-dropbear=y
 CONFIG_PACKAGE_juci-ethernet=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
-CONFIG_PACKAGE_juci-ice-client=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
 CONFIG_PACKAGE_juci-inteno-backup=y
-CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-inteno-multiwan=y
 CONFIG_PACKAGE_juci-inteno-provisioning=y
 CONFIG_PACKAGE_juci-inteno-qos=y
 CONFIG_PACKAGE_juci-inteno-voice-client=y
@@ -73,7 +72,6 @@ CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-netifd=y
 CONFIG_PACKAGE_juci-owsd=y
 CONFIG_PACKAGE_juci-printer=y
-CONFIG_PACKAGE_juci-realtime-graphs=y
 CONFIG_PACKAGE_juci-samba=y
 CONFIG_PACKAGE_juci-simple-gui=y
 CONFIG_PACKAGE_juci-snmpd=y
@@ -95,7 +93,6 @@ CONFIG_PACKAGE_libdaemon=y
 CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
 CONFIG_PACKAGE_libreadline=y
-CONFIG_PACKAGE_loop-detector=m
 CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mtd-utils=y
@@ -103,7 +100,7 @@ CONFIG_PACKAGE_mtd-utils-deubinize=y
 CONFIG_PACKAGE_mtd-utils-imagewrite=y
 CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
 CONFIG_PACKAGE_mtd-utils-nanddump=y
-CONFIG_PACKAGE_mwan3=y
+CONFIG_PACKAGE_multiwan=y
 CONFIG_PACKAGE_ndisc6=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_odhcp6c=y
@@ -117,7 +114,6 @@ CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
 CONFIG_PACKAGE_ppp-mod-pppol2tp=y
-CONFIG_PACKAGE_ppp-mod-pptp=y
 CONFIG_PACKAGE_ppp-multilink=y
 # CONFIG_PACKAGE_ppp is not set
 CONFIG_PACKAGE_qos-scripts=y
@@ -159,14 +155,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
 CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
 CONFIG_BUSYBOX_CONFIG_HTTPD=y
 CONFIG_BUSYBOX_CONFIG_INSMOD=y
-CONFIG_BUSYBOX_CONFIG_MODINFO=y
-CONFIG_BUSYBOX_CONFIG_MODPROBE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODPROBE_BLACKLIST=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
-CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
-CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
 CONFIG_BUSYBOX_CONFIG_LSMOD=y
@@ -207,5 +195,3 @@ CONFIG_LIBCURL_CRYPTO_AUTH=y
 CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_SAMBA3_CONFIG_NO_PRINTING is not set
 # CONFIG_SIGNED_PACKAGES is not set
-CONFIG_KERNEL_DEVTMPFS=y
-CONFIG_KERNEL_DEVTMPFS_MOUNT=y

iop/scripts/extract_core.sh

@@ -1,132 +1,88 @@
 #!/bin/bash
 
-function extract_core {
-	initial_commit=1427738ac4b77f474999ae21af1a8b916468df36
-	patch_dir=extract_core_patches
-	topdir=$(pwd)
+# Intermediate repo for core packages
+core_repo=git@public.inteno.se:iopsys-cc-core.git
 
-	# Paths to packages that should be exported.
-	paths+='package/network/services/base-files '
-	paths+='package/network/services/dnsmasq '
-	paths+='package/network/config/firewall '
-	paths+='package/network/config/netifd '
-	paths+='package/network/config/qos-scripts '
-	paths+='package/system/procd '
-	paths+='package/utils/busybox '
+# Repo to which core packages should be imported
+import_repo=git@public.inteno.se:feed-inteno-openwrt.git
+import_branch=openwrt-cc-core
 
-	function print_usage {
-		echo "Usage: $0 extract_core"
-		echo "  -p <path-to-package> | default"
-		echo "  -r <import-repo>"
-		echo "  -b <import-branch>"
-		echo ""
-		echo "Example: $0 extract_core"
-		echo "  -p package/utils/busybox"
-		echo "  -r feeds/feed_inteno_openwrt"
-		echo "  -b devel"
-	}
 
-	function orphan_branch {
-		local branch=$1
+function export_core {
 
-		git checkout --orphan $branch
-		git rm -rf --cached *
-		git rm -rf --cached .empty
-		rm -rf *
-		rm -rf .empty
-	}
+    local path=$1
 
-	function export_core {
-		local path=$1
-
-		echo "Extracting ${path} from core to ${import_repo}:${import_branch}"
-
-		# Generate patches from start of openwrt repo.
-		mkdir -p $patch_dir
-		repo=$(basename $path)
-		dir=$(dirname $path)
-		git format-patch $initial_commit $path -o $patch_dir
-
-		# Remove dirname from patches to commit the packages to the
-		# top directory in the destination repo.
-		ls $patch_dir | while read line; do
-			sdir=$(echo "$dir/" | sed 's/\//\\\//g')
-			sed -i "s/$sdir//g" $patch_dir/$line
-		done
-		
-		cd $import_repo
-		
-		if [ -n "$(git rev-parse -q --verify remotes/origin/$repo)" ]; then
-			# Create temporary branch to apply patches on.
-			# We need to do this as git am does not like it
-			# when patches have already been applied.
-			orphan_branch tmp
-			git am $topdir/$patch_dir/*
-			
-			# Rebase and merge.
-			git rebase origin/$repo
-			git checkout --track -b $repo origin/$repo
-			git merge tmp
-			git br -d tmp
-		else
-			# Remote branch does not exist for packet so create it.
-			orphan_branch $repo
-			git am $topdir/$patch_dir/*
-		fi
-
-		git push origin $repo
-		
-		# Merge the package branch into the main branch.
-		git checkout $import_branch
-		git merge $repo -m "Syncing $repo"
-		git push origin $import_branch
-		git br -d $repo
-		
-		rm -rf $topdir/$patch_dir
-		cd $topdir
-	}
-
-	# Execute user command
-	while getopts "p:r:b:h" opt; do
-		case $opt in
-			p)
-				export_path=${OPTARG}
-				;;
-			r)
-				import_repo=${OPTARG}
-				;;
-			b)
-				import_branch=${OPTARG}
-				;;
-			h)
-				print_usage
-				exit 1
-				;;
-			\?)
-				print_usage
-				exit 1
-				;;
-		esac
-	done
-
-	if [ ! -n "$export_path" ] || [ ! -n "$import_repo" ] || [ ! -n "$import_branch" ]; then
-   		print_usage
-		exit 1
-	fi
-
-	if [ "$export_path" == "default" ]; then
-		echo "Extracting default packages:"
-		for p in $paths; do
-			export_core $p
-
-		done
-	else
-		export_core $export_path
-	fi
-
-	exit 0
+    # export paths to their own branches in an intermediate repo
+    repo=$(basename $path)
+    git subtree push -q --prefix=$path $core_repo $repo
 }
 
-register_command "extract_core" "Extract core package to separate feed"
+
+function update_core {
+    
+    local path=$1
+    
+    if [ ! -d $topdir/feeds/feed_inteno_openwrt ]; then
+	echo "You need to run ./iop feeds_update"
+	exit -1
+    fi
+
+    # ensure that we are synced with the remote
+    cd $topdir/feeds/feed_inteno_openwrt
+    git checkout $import_branch
+    git pull
+
+    # first install subtrees if they don't already exist
+    repo=$(basename $path)
+    git subtree add --prefix=$repo $core_repo $repo
+    
+    # install subtrees in feed from intermediate repo
+    repo=$(basename $path)
+    echo "Exporting $repo"
+    git subtree pull -q -m "Exporting $repo" --prefix=$repo $core_repo $repo
+
+    # update import repo sync branch
+    git push origin $import_branch
+}
+
+function display_help {
+    
+    echo "Usage: ./iop export_core -e path/to/package"
+}
+
+function extract_core {
+
+# Dir of script location
+topdir=$(pwd)
+
+
+if [ $# -eq 0 ]; then
+    display_help
+    exit -1
+fi
+
+# Execute user command
+while getopts "he:" opt; do
+    case $opt in
+	e)
+	    path=${OPTARG}
+	    echo "Extracting ${path} from core to ${import_repo}:${import_branch}"
+	    export_core $path
+	    update_core $path
+	    ;;
+	h)
+	    display_help
+	    exit 0
+	    ;;
+	\?)
+	    display_help
+	    exit -1
+	    ;;
+	esac
+done
+
+}
+
+register_command "extract_core" "Extract core package to feeds_inteno_openwrt"
 
 

iop/scripts/feeds_update.sh

@@ -24,7 +24,6 @@ function feeds_update {
     else
 	./scripts/feeds update
     fi
-	./scripts/feeds update -ai
 
     # replace core packages with iopsys versions
     if [ $override == 1 ]; then

iop/scripts/genconfig.sh

@@ -9,13 +9,14 @@ function genconfig {
 	CURRENT_CONFIG_FILE=".current_config_file"
 	export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"
 	CUSTPATH="customerconfigs"
+	CUSTREPO="git@private.inteno.se:customerconfigs"
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
 	export DEVELOPER=0
 	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
 
-	iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25 hpc_hu02"
-	iopsys_brcm63xx_arm="dg400 eg400 f104w f104 dg400prime dg400primeb 963138REF_P502"
+	iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
+	iopsys_brcm63xx_arm="dg400 eg400"
 	iopsys_ramips="ex400"
 	ramips="mt7621"
 	target="bogus"
@@ -63,7 +64,6 @@ function genconfig {
 		iceAllowed=0
 		endptAllowed=0
 		natalieAllowed=0
-		mediatekAllowed=0
 
 		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
 		for repo in $allowedRepos; do
@@ -72,7 +72,6 @@ function genconfig {
 			ice-client) iceAllowed=1 ;;
 			endptcfg) endptAllowed=1 ;;
 			natalie-dect*) natalieAllowed=1 ;;
-			linux) mediatekAllowed=1 ;;
 			esac
 		done
 	}
@@ -105,7 +104,7 @@ function genconfig {
 		local ALL="$1"
 		local CUSTOMER="$2"
 		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common | grep -v juci-theme)"
+			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common)"
 			if [ "$boards" ]; then
 				echo "$CUSTOMER has following boards:"
 				for board in $boards; do
@@ -119,10 +118,10 @@ function genconfig {
 			exit 1
 		elif [ -d $CUSTCONF ]; then
 			local customers="$(ls -1 $CUSTCONF)"
-			if [ "$customers" -a "$ALL" == 1 ]; then
+			if [ "$customers" -a "$1" == 1 ]; then
 				for customer in $customers; do
 					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common | grep -v juci-theme)"
+					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common)"
 					if [ "$boards" ]; then
 						for board in $boards; do
 							echo -e "\t$board"
@@ -143,6 +142,16 @@ function genconfig {
 	}
 
 
+	use_local_mirror()
+	{
+		if wget -T 3 -t 2 -O /dev/null $LOCAL_MIRROR >/dev/null 2>/dev/null; then
+			echo "mirror [$LOCAL_MIRROR] exists. Using local mirror"
+			sed -i "s;CONFIG_LOCALMIRROR=.*;CONFIG_LOCALMIRROR=\"$LOCAL_MIRROR\";" .config
+		else
+			echo "mirror [$LOCAL_MIRROR] does not exist. Not using local mirror"
+		fi
+	}
+
 	generate_config()
 	{
 	DIFFFILE="$1"
@@ -155,17 +164,15 @@ function genconfig {
 
 	setup_dirs()
 	{
-		if ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -qw ${CUSTREPO:22}; then
+		if [ $DEVELOPER -eq 1 ]; then
 			if [ ! -d "$CUSTPATH" ]; then
-				git clone "$CUSTREPO" "$CUSTPATH"
+			git clone "$CUSTREPO" "$CUSTPATH"
 			elif [ $IMPORT -eq 1 ]; then
-				cd $CUSTPATH
-				v "git pull"
-				git pull
-				cd - >/dev/null #go back
+			cd $CUSTPATH
+			v "git pull"
+			git pull
+			cd - >/dev/null #go back
 			fi
-		else
-			echo "You do not have access to $CUSTREPO"
 		fi
 
 		if [ ! -d "$FILEDIR" ]; then
@@ -193,18 +200,9 @@ function genconfig {
 		if [ $target == "bogus" ]; then
 			echo "Hardware profile does not exist"
 			exit 1
-		elif [ -n "$CUSTOMER" ]; then
-			if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-				echo "Customer profile for '$CUSTOMER' does not exist"
-				exit 1
-			elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-				echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-				if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					echo "Common profile configuration will be used"
-				else
-					exit 1
-				fi
-			fi
+		elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
+			echo "Customer profile does not exist"
+			exit 1
 		fi
 
 		# Generate base config
@@ -216,13 +214,6 @@ function genconfig {
 			cp $CONFIGPATH/config .config
 		fi
 
-		# Add target diff
-		local target_name=$(echo $target | sed 's/_/-/g')
-		local target_conf=target/linux/${target_name}/config
-		if [ -f $target_conf ]; then
-			cat $target_conf >> .config
-		fi
-
 		# Apply profile diff to master config if selected
 		if [ -n "$PROFILE" ]; then
 			if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
@@ -276,22 +267,19 @@ function genconfig {
 		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
 
 		# developer mode selected ?
-		echo "CONFIG_DEVEL=y" >>.config
 		if [ $DEVELOPER -eq 1 ]; then
 			# rewrite url to clone with ssh instead of http
+			echo "CONFIG_DEVEL=y" >>.config
 			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
 			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
 			[ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
 			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
 			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
-			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
 		else
-			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
 			echo "CONFIG_ICE_OPEN=y" >> .config
 			echo "CONFIG_ENDPT_OPEN=y" >> .config
 			echo "CONFIG_NATALIE_OPEN=y" >> .config
-			echo "CONFIG_MEDIATEK_OPEN=y" >> .config
 		fi
 
 		# Force regeneration of themes
@@ -301,11 +289,6 @@ function genconfig {
 		# Needed to disable kmods for iopsys-brcm targets
 		touch package/kernel/linux/Makefile
 
-		# we need to signal to bradcom SDK that we have changed the board id
-		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
-		# so just touch that file.
-		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-				
 		# Set default values based on selected parameters
 		v "$(make defconfig 2>&1)"
 
@@ -344,7 +327,6 @@ function genconfig {
 			-n|--no-update) export IMPORT=0;;
 			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
 			-p|--profile) export PROFILE="$2"; shift;;
-			-r|--repo) export CUSTREPO="$2"; shift;;
 			-s|--override) export SRCTREEOVERR=1;;
 			-h|--help) usage;;
 			-l|--list) list_customers 0 $2;;
@@ -358,11 +340,12 @@ function genconfig {
 			esac
 			shift;
 		done
-
-		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
-
 		setup_dirs
 		create_and_copy_files "$1" "$2"
+
+		if [ $masterconfig -eq 1 ]; then
+			use_local_mirror
+		fi
 	fi
 }
 

iop/scripts/generate_tarballs.sh

@@ -2,16 +2,15 @@
 
 
 build_bcmkernel_consumer() {
-	local tarfile bcmkernelcommith sdkversion
-	sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
+	local tarfile bcmkernelcommith
 	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/feed_inteno_broadcom/bcmkernel/$sdkversion.mk | cut -d'=' -f2)
 	# do not build bcmopen sdk if it was already built before
-	ssh $SERVER "ls $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz" && return
+	ssh $SERVER "ls $FPATH/bcmopen-$profile-$bcmkernelcommith.tar.gz" && return
 	cd ./build_dir/target-*_uClibc-0.9.33.*/bcmkernel-3.4-$sdkversion/bcm963xx/release
 	sh do_consumer_release -p $profile -y
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
 	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
-	scp $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
+	scp $tarfile $SERVER:$FPATH/bcmopen-$profile-$bcmkernelcommith.tar.gz
 	rm -f $tarfile
 	cd $curdir
 }
@@ -59,48 +58,15 @@ build_ice_consumer() {
 	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
 	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
 	iceversion=$icebasever$icerelease
-	ssh $SERVER "ls $FPATH/ice-client-$target-$iceversion-$icecommith.tar.gz" && return
-	cd ./build_dir/target-*_uClibc-0.9.33.*/ice-client-$icebasever/ipkg-* || cd ./build_dir/target-mips*musl-*/ice-client-$icebasever/ipkg-*
-	tar -czv  ice-client -f ice-client-$target-$iceversion-$icecommith.tar.gz
-	scp ice-client-$target-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
-	cp ice-client-$target-$iceversion-$icecommith.tar.gz $curdir/
-	rm -f ice-client-$target-$iceversion-$icecommith.tar.gz
+	ssh $SERVER "ls $FPATH/ice-client-$profile-$iceversion-$icecommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/ice-client-$icebasever/ipkg-*
+	tar -czv  ice-client -f ice-client-$profile-$iceversion-$icecommith.tar.gz
+	scp ice-client-$profile-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
+	cp ice-client-$profile-$iceversion-$icecommith.tar.gz $curdir/
+	rm -f ice-client-$profile-$iceversion-$icecommith.tar.gz
 	cd $curdir
 }
 
-build_mediatek_kernel() {
-	local mediatek_commit kernel_version kernel
-
-	mediatek_commit=$(grep CONFIG_KERNEL_GIT_COMMIT .config | cut -d '=' -f2 | tr -d '"')
-	kernel_version=$(grep KERNEL_PATCHVER target/linux/iopsys-ramips/Makefile  | cut -d '=' -f2)
-	kernel=linux-${kernel_version}.*
-	ssh $SERVER "ls $FPATH/mediatek-kernel-open-$mediatek_commit.tar.gz" && return
-	echo "Building mediatek kernel tarball from kernel commit:"	
-	echo $mediatek_commit
-	cd build_dir/target-mipsel_1004kc*/linux-iopsys-ramips_*/$kernel
-
-	# Save Kconfig files to recreate the same kernel config,
-	# delete everyting else.
-	find drivers/net/wireless/mt_wifi -type f ! -name Kconfig | xargs rm
-	find drivers/net/wireless/rlt_wifi -type f ! -name Kconfig | xargs rm
-
-	# remove git repo
-	rm -rf .git
-
-	# patch kernel for openstk
-	ls consumer_release | while read line; do patch -p1 < consumer_release/$line; done
-	cd ..
-
-	tar -czv $kernel -f mediatek-kernel-open-$mediatek_commit.tar.gz
-	scp mediatek-kernel-open-$mediatek_commit.tar.gz $SERVER:$FPATH/
-	cd $curdir
-}
-
-function print_usage {
-	echo "Usage: $0 generate_tarballs"
-	echo "  -t <target>"
-}
-
 function generate_tarballs {
 
     SERVER="god@software.inteno.se"
@@ -108,47 +74,14 @@ function generate_tarballs {
 
     git remote -v | grep -q http && return # do not continue if this is an open SDK environment
 
-    target=$(grep CONFIG_TARGET_BOARD .config | cut -d'=' -f2 | tr -d '"')
-    board=$(grep CONFIG_TARGET_IBOARDID .config | cut -d'=' -f2 | tr -d '"')
     profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
+    sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
     curdir=$(pwd)
 
-
-	# Execute user command
-	while getopts "t:h" opt; do
-		case $opt in
-			t)
-				stk_target=${OPTARG}
-				;;
-			h)
-				print_usage
-				exit 1
-				;;
-			\?)
-				print_usage
-				exit 1
-				;;
-		esac
-	done
-
-	if [ ! -n "$stk_target" ]; then
-		print_usage
-		exit 1
-	fi
-
-	if [ "$stk_target" == "broadcom" ]; then
-		build_bcmkernel_consumer
-		build_natalie_consumer
-		build_endptcfg_consumer
-		build_ice_consumer
-	elif [ "$stk_target" == "mediatek" ]; then
-		build_mediatek_kernel
-		build_ice_consumer		
-	else
-		echo "Invalid target: $stk_target"
-		print_usage
-		exit 1
-	fi
+    build_bcmkernel_consumer
+    build_natalie_consumer
+    build_endptcfg_consumer
+    build_ice_consumer
 
 }
 

iop/scripts/ssh_sysupgrade.sh

@@ -34,7 +34,7 @@ function ssh_sysupgrade_latest {
 		exit 1
 	fi
 	{ cd `dirname $0`
-		IMAGE=`ls -Art bin/*/*.y[23] | tail -n1`
+		IMAGE=`ls -Art bin/*/*.y2 | tail -n1`
 		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
 	}
 }

iop/scripts/update_package.sh

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+UPDATE=0
+
 print_git_update()
 {
     echo "pkg -> ${PKG_NAME}"
@@ -394,16 +396,12 @@ insert_hash_in_feeds_config()
 check_packages()
 {
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
-    echo "Now checking if any changes have been done to the packages."
+    echo "Now checking if any changes has been done to the packages."
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
 
-    # only scan in the build directory that is currently in use.
-    CPU=$(grep  "CONFIG_CPU_TYPE=" .config| cut -f2 -d\")
-    LIBC=$(grep "CONFIG_LIBC=" .config| cut -f2 -d\")
-    
     # First scan all files in build dir for packages that have .git directories.
-    all_pkgs=$(find build_dir/*${CPU}*${LIBC}* -name ".git")
-    
+    all_pkgs=$(find build_dir/ -name ".git")
+
     for pkg in `echo "$all_pkgs"`
     do
 	pkg=$(dirname $pkg)
@@ -425,7 +423,7 @@ check_packages()
 		    #  print_git_update
 		    git_repos_uptodate
 		    insert_hash_in_feed_makefile
-		    [ ${UPDATE} -eq 1 ] && insert_version_in_feed_makefile
+		    [ "${UPDATE}" ] && insert_version_in_feed_makefile
 		    create_message >tmp/msg
 		    commit_feed tmp/msg
 		    insert_hash_in_feeds_config
@@ -489,7 +487,7 @@ Date: %ai%n\
 check_feeds()
 {
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
-    echo "Now checking if any changes have been done to the feeds."
+    echo "Now checking if any changes has been done to the feeds."
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
 
     feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
@@ -536,7 +534,7 @@ check_feeds()
 	    read answer
 
 	    case $answer in
-		n|N|'')
+		n|N)
 		    continue;;
 	    esac
 	    branch_uptodate feeds/${feed}
@@ -584,8 +582,6 @@ usage(){
 # Exported interface
 function update_package {
 
-	UPDATE=0
-
     Color_Off='\033[0m'       # Text Reset
 
     # Regular Colors

iup/Makefile

@@ -21,7 +21,7 @@ define Package/iup
 endef
 
 define Package/iup/description
-	This package contains Inteno's IUP Client
+	This package contains Intenos IUP Client
 endef
 
 define Build/Compile

iup/files/sbin/iup

@@ -4,7 +4,6 @@ echo $$ > /var/run/iup.pid
 
 . /lib/functions.sh
 . /lib/functions/network.sh
-. /lib/functions/savecfg.sh
 . /usr/share/libubox/jshn.sh
 
 include /lib/upgrade
@@ -17,27 +16,15 @@ export IUPTEMP="/tmp/iup"
 export INTERACTIVE=0
 export VERBOSE=0
 export CONF=1
-export DESKEY=
-export MAC=
+export DESKEY=$(cat /proc/nvram/DesKey | tr -d '\n' | hexdump -e '16/1 "%02x"')
+export MAC=$(cat /proc/nvram/BaseMacAddr)
 export RANGE=10
 export RETRYSTOP=5
 export SLEEP=10
-
-local sysinfo=$(ubus call router.system info)
-json_load "$sysinfo"
-json_select system
-json_get_var MAC basemac
-json_select ..
-json_select keys
-json_get_var DESKEY des
-json_select ..
-
-# MAC lowercase to uppercase and remove ':'
-MAC=$(echo $MAC | tr '[a-z]' '[A-Z]' | tr -d ':')
-
-# Convert DESKEY to HEX format
-DESKEY=$(echo $DESKEY | tr -d '\n' | hexdump -e '16/1 "%02x"')
-
+#remove whitespace
+MAC=${MAC// /}
+#lower to upper Conversion
+MAC=$(echo $MAC | tr '[a-z]' '[A-Z]')
 
 # no verbose:	no output
 # -v		log to system log
@@ -50,13 +37,6 @@ v() {
 	[ "$VERBOSE" -eq 3 ] && logger -s -t $0[$$] "$@" 2>&1 | tee /dev/console && return
 }
 
-vv() {
-	VERBOSE="$(($VERBOSE + 1))"
-	v "$@"
-	VERBOSE="$(($VERBOSE - 1))"
-
-}
-
 get_packages()
 {
 	local pack
@@ -74,30 +54,9 @@ reload ()
 	for packname in $pack
 	do
 		ubus call uci commit '{"config":"'$packname'"}'
-		sleep 1
 	done
 }
 
-save_usercfg()
-{
-	savecfg_save_config fw_redirect fw_parental wifi
-}
-
-apply_usercfg()
-{
-	# decide to save the user changes based on keepuserconfig received through provisioning
-	local keep
-	config_load provisioning
-	config_get_bool keep configserver keepuserconfig "0"
-	v "apply_usercfg(): keepuserconfig = $keep"
-	if [ "$keep" != "1" ] ; then
-		savecfg_rm_files
-		return
-	fi
-
-	savecfg_apply_config fw_redirect fw_parental wifi
-}
-
 handle_provisioning() {
 	local config="$1"
 	local default="$2"
@@ -153,7 +112,7 @@ handle_provisioning() {
 		  fi
 		done
 	fi
-	if [ ! -s "$IUPCONFFILES" ] && [ "$enabled" -eq 1 ]; then
+	if [ ! -s "$IUPCONFFILES" ]; then
 		echo "File not Found"
 		reboot="off"
 		CONF=0
@@ -189,13 +148,12 @@ handle_Downloaded_file()
 					reboot="off"
 					rm -rf $IUPTEMP
 				else
-					save_usercfg
 					cd $IUPTEMP
 					tar xvzf $IUPCONFFILES
 					for f in $CONFILESLURP
 					do
 						v "File to be applied $f and config $(cat $f)"
-						uci -f $f import
+						uci import -f $f
 					done
 					pack=$(get_packages $CONFILESLURP)
 					v "Packages to be commited: $pack"
@@ -203,10 +161,8 @@ handle_Downloaded_file()
 					do
 						uci commit $packname
 					done
-					apply_usercfg
 					reboot=`uci -q  get provisioning.configserver.reboot`
 					if [ "$reboot" != "on" ]; then
-						sync
 						reload $CONFILESLURP
 					fi
 					rm -rf $IUPTEMP
@@ -306,7 +262,7 @@ change_to_vlan() {
 	v "option 132: committed update to file network: ifname=${new_wan_if}"
 
 	# reboot into new if configuration.
-	vv "Rebooting"
+	v "Rebooting"
 	export REBOOT_REASON=iup
 	/sbin/reboot
 }
@@ -400,6 +356,8 @@ parse_dhcp_options()
 	json_get_var vlanid vlanid # option 132
 	json_get_var vlanpriority vlanpriority # option 133
 
+	v "Processing dhcp options"
+
 	if [ $privopt224 ]; then
 		v "dhcp option 224 firmware url $privopt224"
 		handle_option224 $privopt224
@@ -477,22 +435,13 @@ wait_for_default_gateway()
 			return 0
 		fi
 
-		# try the nameservers too
-		for ns in $(grep nameserver /var/resolv.conf.auto | awk '{print $2}'); do
-			if ping -q -w 1 -c 1 $device $ns >/dev/null 2>&1 ; then
-				[ "$wait_time" -lt "60" ] && v "Name server $ns is reachable"
-				sleep $wait_interval
-				return 0
-			fi
-		done
-
-		v "Waiting for default gateway or name server. Countdown $wait_time seconds"
+		v "Waiting for default gateway. Countdown $wait_time seconds"
 		sleep $wait_interval
 		wait_time=$((wait_time - wait_interval))
 		[ "$wait_time" -le "0" ] && break # timer expired
 	done
 
-	return 1 # default gateway and name server are not reachable
+	return 1 # default gateway not reachable
 }
 
 
@@ -518,7 +467,7 @@ main()
 	done
 
 	if ! wait_for_default_gateway ; then
-		v "Neither default gateway nor name server are reachable. Aborting iup."
+		v "Default gateway is not reachable. Aborting iup."
 		exit 1
 	fi
 
@@ -578,7 +527,7 @@ main()
 	fi
 
 	if [ "$reboot" == "on" ]; then
-		vv "Rebooting"
+		v "Rebooting"
 		export REBOOT_REASON=iup
 		/sbin/reboot
 	fi

layer2interface/Makefile

@@ -29,14 +29,8 @@ endef
 define Build/Compile
 endef
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
 define Package/layer2interface/install
 	$(CP) ./broadcom/* $(1)/
 endef
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-define Package/layer2interface/install
-	$(CP) ./broadcom/* $(1)/
-endef
-endif
 
 $(eval $(call BuildPackage,layer2interface))

layer2interface/broadcom/etc/hotplug.d/switch/10-switch

@@ -1,113 +0,0 @@
-. /lib/network/config.sh
-
-# FIX: for EG300 WAN port for release 3.13.1 - 4.x
-if [ "$INTERFACE" == "eth2" ]; then
-	touch /var/update.eth2
-fi
-# end FIX
-
-addif() {
-	# check if wan had a event and start all related services
-	wan=`uci -q get layer2_interface_ethernet.Wan.baseifname`
-	if [ "$INTERFACE" == "$wan" ]; then
-		/etc/init.d/layer2_interface_ethernet start
-		/etc/init.d/layer2_interface_vlan start
-	fi
-}
-
-delif() {
-	##remove ethernet wan and nuke any vlans associated
-	wan=`uci -q get layer2_interface_ethernet.Wan.baseifname`
-	if [ "$INTERFACE" == "$wan"  ]; then
-		/etc/init.d/layer2_interface_ethernet stop
-	fi
-}
-
-# true if speed on interface is Gbit
-gigatest() {
-	local speed=$(ethctl $INTERFACE media-type 2>&1 | awk '{if (NR == 2) print $6}')
-	case "$speed" in
-		1000*) return 0 ;;
-		*) return 1 ;;
-	esac
-}
-
-# true if there is a link on any lan port
-lan_test () {
-	local landev=$(db get hw.board.ethernetLanPorts)
-	local ledontest
-	for dev in $landev; do
-		ledontest=$(cat /sys/class/net/$dev/operstate)
-		if [ "$ledontest" == "up" ]; then
-			return 0
-		fi
-	done
-	return 1
-}
-
-# true if adsl or vdsl is up.
-dsltest() {
-	if cat /var/state/layer2_interface 2>/dev/null | grep 'adsl\|vdsl' | grep up; then
-		return 0
-	else
-		return 1
-	fi
-}
-
-case "$ACTION" in
-	add|register)
-		case "$PHYSDEVDRIVER" in
-			natsemi) sleep 1 ;;
-		esac
-		addif
-		local interfname=$(interfacename $INTERFACE)
-		local operstate=$(cat /sys/class/net/$INTERFACE/operstate)
-#		if [ "$operstate" == "up" ]; then
-		if true ; then
-			case "$interfname" in
-				GbE*)
-					ubus call led.lan           set '{"state" : "ok"}'
-					ubus call led.gbe           set '{"state" : "ok"}'
-					ubus call led.gbe_phy_link  set '{"state" : "ok"}'
-					ubus call led.gbe_phy_speed set '{"state": "off"}'
-					$(gigatest) && ubus call led.gbe_phy_speed set '{"state":"ok"}'
-				;;
-				LAN*)
-					ubus call led.lan set '{"state":"ok"}'
-				;;
-				WAN*)
-					ubus call led.wan           set '{"state" : "ok"}'
-					ubus call led.wan_phy_link  set '{"state" : "ok"}'
-					ubus call led.wan_phy_speed set '{"state" : "off"}'
-					$(gigatest) && ubus call led.wan_phy_speed set '{"state":"ok"}'
-				;;
-			esac
-		fi		
-	;;
-	remove|unregister)
-		local interfname=$(interfacename $INTERFACE)
-		local operstate=$(cat /sys/class/net/$INTERFACE/operstate)
-		if [ "$operstate" == "down" ]; then
-			case "$interfname" in
-				GbE*)
-					ubus call led.gbe           set '{"state" : "off"}'
-					ubus call led.gbe_phy_link  set '{"state" : "off"}'
-					ubus call led.gbe_phy_speed set '{"state" : "off"}'
-					$(lan_test) || ubus call led.lan set '{"state":"off"}'
-				;;
-				LAN*)
-					$(lan_test) || ubus call led.lan set '{"state":"off"}'
-				;;
-				WAN*)
-					ubus call led.wan           set '{"state" : "off"}'
-					ubus call led.wan_phy_speed set '{"state" : "off"}'
-					ubus call led.wan_phy_link  set '{"state" : "off"}'
-					# is this needed here ?? don't the dsl hotplug event control this ???
-#					$(dsltest) || ubus call led.dsl set '{"state":"off"}'
-				;;
-			esac
-		fi
-		delif
-	;;
-esac
-

layer2interface/broadcom/etc/init.d/layer2_interface

@@ -16,7 +16,6 @@ start_service() {
 	local AnnexL
 	local ADSL2plus
 	local VDSL2
-	local GFast
 	local a8a
 	local b8b
 	local c8c
@@ -24,14 +23,11 @@ start_service() {
 	local a12a
 	local b12b
 	local a17a
-	local a30a
-	local b35b
 	local US0
 	local bitswap
 	local sra
 	local vdsl
 
-
 	config_load layer2_interface
 	config_get Glite capabilities Glite
 	config_get GDmt capabilities GDmt
@@ -40,7 +36,6 @@ start_service() {
 	config_get ADSL2plus capabilities ADSL2plus
 	config_get AnnexL capabilities AnnexL
 	config_get VDSL2 capabilities VDSL2
-	config_get GFast capabilities GFast
 	config_get AnnexM capabilities AnnexM
 
 	config_get a8a capabilities 8a
@@ -50,9 +45,6 @@ start_service() {
 	config_get a12a capabilities 12a
 	config_get b12b capabilities 12b
 	config_get a17a capabilities 17a
-	config_get a30a capabilities 30a
-	config_get b35b capabilities 35b
-	config_get BrcmPriv1 capabilities BrcmPriv1
 
 	config_get US0 capabilities US0
 	config_get bitswap capabilities bitswap
@@ -66,7 +58,6 @@ start_service() {
 	ADSL2plus=$(echo $ADSL2plus | sed 's/Enabled\|1/p/g')
 	AnnexM=$(echo $AnnexM | sed 's/Enabled\|1/m/g')
 	VDSL2=$(echo $VDSL2 | sed 's/Enabled\|1/v/g')
-	GFast=$(echo $GFast | sed 's/Enabled\|1/f/g')
 
 	a8a=$(echo $a8a | sed 's/Enabled\|1/8a/g')
 	b8b=$(echo $b8b | sed 's/Enabled\|1/8b/g')
@@ -75,10 +66,7 @@ start_service() {
 	a12a=$(echo $a12a | sed 's/Enabled\|1/12a/g')
 	b12b=$(echo $b12b | sed 's/Enabled\|1/12b/g')
 	a17a=$(echo $a17a | sed 's/Enabled\|1/17a/g')
-	a30a=$(echo $a30a | sed 's/Enabled\|1/30a/g')
-	b35b=$(echo $b35b | sed 's/Enabled\|1/BrcmPriv1/g')
-	BrcmPriv1=$(echo $BrcmPriv1 | sed 's/Enabled\|1/BrcmPriv1/g')
-	[ -n "$b35b" ] && BrcmPriv1=""
+
 	US0=$(echo $US0 | sed 's/1/on/g')
 	US0=$(echo $US0 | sed 's/0/off/g')
 	bitswap=$(echo $bitswap | sed 's/1/on/g')
@@ -95,17 +83,13 @@ start_service() {
 	json_get_var vdsl vdsl
 
 	if [ $vdsl -eq 1 ]; then
-		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2$GFast --profile \"$a8a $b8b $c8c $d8d $a12a $b12b $a17a $a30a $b35b $BrcmPriv1\" --sra $sra --bitswap $bitswap --us0 $US0"
-		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2$GFast --profile "$a8a $b8b $c8c $d8d $a12a $b12b $a17a $a30a $b35b $BrcmPriv1" --sra $sra --bitswap $bitswap --us0 $US0
+		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2 --profile \"$a8a $b8b $c8c $d8d $a12a $b12b $a17a\" --sra $sra --bitswap $bitswap --us0 $US0"
+		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2 --profile "$a8a $b8b $c8c $d8d $a12a $b12b $a17a" --sra $sra --bitswap $bitswap --us0 $US0
 	else
 		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM --sra $sra --bitswap $bitswap"
 		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM --sra $sra --bitswap $bitswap
 	fi
 
-	if [ "$GFast" == "f" ]; then
-		# enable V43 tone set for GFAST
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x400000 0x400000
-	fi
 }
 
 

layer2interface/broadcom/etc/init.d/layer2_interface_ethernet

@@ -50,11 +50,10 @@ addethernet() {
 	config_get baseifname $1 baseifname
 	config_get ifname $1 ifname
 	config_get bridge $1 bridge
-	config_get mac2 $1 mac2
 	
 	ifname="${ifname:-$baseifname.1}"
 
-	brcm_virtual_interface_rules "$baseifname" "$ifname" "$bridge" "$mac2"
+	brcm_virtual_interface_rules "$baseifname" "$ifname" "$bridge"
 
 }
 

layer2interface/broadcom/etc/uci-defaults/20-layer2-config-generate

@@ -1,13 +1,30 @@
 #!/bin/sh
 
-local hasEthWan="$(db -q get hw.board.hasEthWan)"
-hasEthWan=${hasEthWan:-1}
+local hasEthWan="1"
 local hasAdsl="$(db -q get hw.board.hasAdsl)"
 local hasVdsl="$(db -q get hw.board.hasVdsl)"
 
 local LANPORTS="$(db -q get hw.board.ethernetLanPorts)"
 local WANPORTS=""
 
+# populate layer2_interface_ethernet #
+if [ "$hasEthWan" == "1" ]; then
+	local wanEthernetPort="$(db -q get hw.board.ethernetWanPort)"
+	wanEthernetPort="${wanEthernetPort:-eth0}"
+	if [ ! -f /etc/config/layer2_interface_ethernet -o -z "$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_ethernet <<EOF
+config ethernet_interface 'Wan'
+	option name 'WAN'
+	option baseifname '${wanEthernetPort}'
+	option ifname '${wanEthernetPort}.1'
+EOF
+	fi
+	local ifname="$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)"
+	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
+elif [ "$hasEthWan" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_ethernet
+fi
+
 # populate layer2_interface #
 if [ "$hasAdsl" == "1" ]; then
 	if [ ! -f /etc/config/layer2_interface -o -z "$(uci -q get layer2_interface.capabilities)" ]; then
@@ -43,28 +60,6 @@ elif [ "$hasAdsl" == "0" -a "$hasVdsl" == "0" ]; then
 	echo "" > /etc/config/layer2_interface
 fi
 
-# populate layer2_interface_vdsl #
-if [ "$hasVdsl" == "1" ]; then
-	local wanVdslPort=$(db -q get hw.board.vdslWanPort)
-	wanVdslPort="${wanVdslPort:-ptm0}"
-	if [ ! -f /etc/config/layer2_interface_vdsl -o -z "$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)" ]; then
-		cat > /etc/config/layer2_interface_vdsl <<EOF
-config vdsl_interface
-	option 'unit' '0'
-	option 'ifname' '${wanVdslPort}.1'
-	option 'baseifname' '${wanVdslPort}'
-	option 'name' 'VDSL2'
-	option 'dslat' '1'
-	option 'ptmprio' '1'
-	option 'ipqos' '1'
-EOF
-	fi
-	local ifname="$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)"
-	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
-elif [ "$hasVdsl" == "0" ]; then
-	echo "" > /etc/config/layer2_interface_vdsl
-fi
-
 # populate layer2_interface_adsl #
 if [ "$hasAdsl" == "1" ]; then
 	local wanAdslPort=$(db -q get hw.board.adslWanPort)
@@ -89,22 +84,26 @@ elif [ "$hasAdsl" == "0" ]; then
 	echo "" > /etc/config/layer2_interface_adsl
 fi
 
-# populate layer2_interface_ethernet #
-if [ "$hasEthWan" == "1" ]; then
-	local wanEthernetPort="$(db -q get hw.board.ethernetWanPort)"
-	wanEthernetPort="${wanEthernetPort:-eth0}"
-	if [ ! -f /etc/config/layer2_interface_ethernet -o -z "$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)" ]; then
-		cat > /etc/config/layer2_interface_ethernet <<EOF
-config ethernet_interface 'Wan'
-	option name 'WAN'
-	option baseifname '${wanEthernetPort}'
-	option ifname '${wanEthernetPort}.1'
+# populate layer2_interface_vdsl #
+if [ "$hasVdsl" == "1" ]; then
+	local wanVdslPort=$(db -q get hw.board.vdslWanPort)
+	wanVdslPort="${wanVdslPort:-ptm0}"
+	if [ ! -f /etc/config/layer2_interface_vdsl -o -z "$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_vdsl <<EOF
+config vdsl_interface
+	option 'unit' '0'
+	option 'ifname' '${wanVdslPort}.1'
+	option 'baseifname' '${wanVdslPort}'
+	option 'name' 'VDSL2'
+	option 'dslat' '1'
+	option 'ptmprio' '1'
+	option 'ipqos' '1'
 EOF
 	fi
-	local ifname="$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)"
+	local ifname="$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)"
 	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
-elif [ "$hasEthWan" == "0" ]; then
-	echo "" > /etc/config/layer2_interface_ethernet
+elif [ "$hasVdsl" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_vdsl
 fi
 
 # populate network config ifnames #

layer2interface/broadcom/lib/network/brcmwifi.sh

@@ -180,12 +180,10 @@ enableBSD() {
 	nvram set bsd_primary=192.168.1.1
 	nvram set bsd_scheme=2
 	nvram set bsd_poll_interval=1
-	nvram set bsd_bounce_detect="180 2 3600"
+	nvram set bsd_bounce_detect="180 8 3600"
 	nvram set bsd_msglevel=0
 	nvram set bsd_status_poll=5
 	nvram set bsd_status=3
-	nvram set bsd_actframe=1
-	nvram set bsd_steer_no_deauth=1
 
 	for wdev in wl0 wl1; do
 		#if [ "$(uci -q get wireless.$wdev.band_steering)" == "1" ]; then
@@ -196,16 +194,16 @@ enableBSD() {
 				# RSSI Threshold based policy #
 				if [ "$(nvram get ${wdev}_nband)" == "2" ]; then
 					# 2.4G
-					nvram set ${wdev}_bsd_if_qualify_policy="0 0x0"
+					nvram set ${wdev}_bsd_if_quality_policy="0 0x0 -100"
 					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
-					nvram set ${wdev}_bsd_sta_select_policy="20 -60 0 0 1 0 0 0 0 0x42"
+					nvram set ${wdev}_bsd_sta_select_policy="0 0 0 0 0 1 0 0 0 0x600"
 					nvram set ${wdev}_bsd_steer_prefix=$wdev
-					nvram set ${wdev}_bsd_steering_policy="0 0 0 -60 0 0x52"
+					nvram set ${wdev}_bsd_steering_policy="0 5 3 0 0 0x10"
 				else
 					# 5G
-					nvram set ${wdev}_bsd_if_qualify_policy="30 0x0"
+					nvram set ${wdev}_bsd_if_quality_policy="40 0x0 $rssi_threshold"
 					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
-					nvram set ${wdev}_bsd_sta_select_policy="20 $rssi_threshold 0 0 1 0 0 0 0 0x40"
+					nvram set ${wdev}_bsd_sta_select_policy="0 0 0 0 0 1 0 0 0 0x240"
 					nvram set ${wdev}_bsd_steer_prefix=$wdev
 					nvram set ${wdev}_bsd_steering_policy="80 5 3 $rssi_threshold 0 0x40"
 				fi
@@ -213,14 +211,14 @@ enableBSD() {
 				# Bandwidth Usage based policy #
 				if [ "$(nvram get ${wdev}_nband)" == "2" ]; then
 					# 2.4G
-					nvram set ${wdev}_bsd_if_qualify_policy="0 0x0 -75"
+					nvram set ${wdev}_bsd_if_quality_policy="0 0x0 -75"
 					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
 					nvram set ${wdev}_bsd_sta_select_policy="0 0 0 0 0 1 0 0 0 0x600"
 					nvram set ${wdev}_bsd_steer_prefix=$wdev
 					nvram set ${wdev}_bsd_steering_policy="0 5 3 0 0 0x10"
 				else
 					# 5G
-					nvram set ${wdev}_bsd_if_qualify_policy="40 0x0 -75"
+					nvram set ${wdev}_bsd_if_quality_policy="40 0x0 -75"
 					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
 					nvram set ${wdev}_bsd_sta_select_policy="0 0 0 0 0 1 0 0 0 0x240"
 					nvram set ${wdev}_bsd_steer_prefix=$wdev
@@ -261,7 +259,6 @@ wlmngr_startWsc()
 	nvram set wps_timeout_enable=0
 	#nvram get wps_config_method
 	nvram set wps_version2=enabled # extra
-	nvram set wps_oob_configured=1
 	nvram set lan_wps_oob=disabled # extra
 	nvram set lan_wps_reg=enabled # extra
 
@@ -354,11 +351,11 @@ wlmngr_finalize() {
 
 	# RADAR THRESHOLD VALUES #
 	local pcid="$(wlctl -i wl$idx revinfo | awk 'FNR == 2 {print}' | cut -d'x' -f2)"
-	local isac="$(db get hw.$pcid.is_ac)"
-	if [ "$isac" == "1" ]; then
-		wlctl -i wl$idx msglevel +radar +dfs 2>/dev/null
-		dhdctl -i wl$idx dconpoll 200 2>/dev/null
-	fi
+#	local isac="$(db get hw.$pcid.is_ac)"
+#	if [ "$isac" == "1" ]; then
+#		wlctl -i $device msglevel +radar +dfs
+#		#dhdctl -i $device dconpoll 200
+#	fi
 	local rdrthrs="$(db get hw.$pcid.radarthrs)"
 	if [ -n "$rdrthrs" ]; then
 		wlctl -i wl$idx radarthrs $rdrthrs

layer2interface/broadcom/lib/network/vlan.sh

@@ -161,38 +161,12 @@ addbrcmvlan()
 	fi
 }
 
-update_last_mac_group()
-{
-	local ifname=$1
-	local last_mac_group=$2
-
-	local full_mac modified_mac dev_mac
-
-	full_mac="$(ifconfig $ifname | awk '{print $NF; exit}')"
-
-	[ "${full_mac}" == "" ] && return
-
-	modified_mac="${full_mac:0:15}${last_mac_group}"
-
-	devs="wl0 wl1 bcmsw"
-
-	for dev in $devs; do
-		dev_mac="$(ifconfig $dev | awk '{print $NF; exit}')"
-		if [ "$dev_mac" == "$modified_mac" ]; then
-			return
-		fi
-	done
-
-	ifconfig $ifname hw ether "${modified_mac}"
-}
-
 
 brcm_virtual_interface_rules()
 {
 	local baseifname=$1
 	local ifname=$2
 	local bridge=$3
-	local last_mac_group=$4
 
 	bridge="${bridge:-0}"
 
@@ -256,10 +230,6 @@ brcm_virtual_interface_rules()
 		vlanctl --if $baseifname --rx --tags 0 --set-rxif $ifname --filter-vlan-dev-mac-addr 1 --rule-insert-before -1
 	fi
 
-	if [ "$last_mac_group" != "" ]; then
-		update_last_mac_group $ifname $last_mac_group
-	fi
-
 	ifconfig $ifname up
 	ifconfig $ifname multicast
 }

libtrace/Makefile

@@ -7,7 +7,7 @@ PKG_RELEASE:=1
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/apietila/libtrace.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_VERSION:=e4b4c5cce35a52da152776a00532aa0b80879c5b
+PKG_SOURCE_VERSION:=HEAD
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)

loop-detector/Makefile

@@ -1,48 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=loop-detector
-PKG_VERSION:=1.0
-
-PKG_SOURCE_VERSION:=d0fb770eacd6691b98df138b60f5116e02f71a9b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/loop-detector
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-
-define Package/loop-detector
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=L2 Loop detector
-  DEPENDS:= +libpcap +libuci +libpthread
-endef
-
-define Package/loop-detector/description
-	L2 Loop detection package
-endef
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE
-
-TARGET_LDFLAGS += \
-	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
-
-CONFIGURE_ARGS += \
-	--with-uci-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-
-define Package/loop-detector/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/loop-detector $(1)/sbin/
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(CP) ./files/loop_detection.init $(1)/etc/init.d/loop_detection
-	$(INSTALL_DIR) $(1)/etc/config
-	$(CP) ./files/loop_detection.config $(1)/etc/config/loop_detection
-endef
-
-$(eval $(call BuildPackage,loop-detector))

loop-detector/files/loop_detection.config

@@ -1,5 +0,0 @@
-config loop-detect loop
-	option enabled '1'
-	option discovery_interval '10'
-	option recovery_check_tries '5'
-