Voice client depends on asterisk13

brcmslic/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=0.1
-PKG_SOURCE_URL:=git@private.inteno.se:brcmslic
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=837ec19e37650e424e77c921672a0806e198ba7b
-PKG_NAME:=brcmslic
-
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/brcmslic
-  CATEGORY:=Utilities
-  TITLE:=Brcmslic
-  URL:=
-  DEPENDS:=
-endef
-
-define Package/brcmslic/description
-	Brcmslic
-endef
-
-
-define Package/brcmslic/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/brcmslic $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endpt $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,brcmslic))

brcmslic/files/dect.config

@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-

catv/files/etc/config/catv

@@ -1,4 +1,4 @@
 
 config service 'catv'
-        option enable '0'
+        option enable 'no'
         option filter '3'

fping/Makefile

@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fping
-PKG_VERSION:=4.0
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://fping.org/dist/
-PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
-
-PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
-PKG_LICENSE:=BSD-4-Clause
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fping
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
-  URL:=http://fping.org/
-endef
-
-
-define Package/fping/description
-	fping is a ping like program which uses the Internet Control Message Protocol
-	(ICMP) echo request to determine if a target host is responding.  fping
-	differs from ping in that you can specify any number of targets on the command
-	line, or specify a file containing the lists of targets to ping.  Instead of
-	sending to one target until it times out or replies, fping will send out a
-	ping packet and move on to the next target in a round-robin fashion.
-endef
-
-CONFIGURE_ARGS+= \
-	--enable-ipv4 \
-	--enable-ipv6
-
-TARGET_CFLAGS += -std=gnu99
-
-define Package/fping/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,fping))

ice-client/Makefile

@@ -19,14 +19,14 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.0.1
-PKG_RELEASE:=RC1
+BASE_PKG_VERSION:=4.4.0
+PKG_RELEASE:=RC4
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=a2635dd11c477d70728ab6cbe5c2dee3965dbe14
+PKG_SOURCE_VERSION:=e855fdb65ec312e9ec044ce9319d6ac17fde57cd
 ifeq ($(CONFIG_ICE_OPEN),y)
 TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
@@ -154,7 +154,6 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/scripts/etc/config/ice $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/iopsys
 	$(CP) $(PKG_BUILD_DIR)/scripts/server.ini $(1)/etc/iopsys	
-	$(CP) $(PKG_BUILD_DIR)/scripts/defaults.ini $(1)/etc/iopsys	
 	$(CP) $(PKG_BUILD_DIR)/scripts/modify.ini $(1)/etc/iopsys
 	$(INSTALL_DIR) $(1)/etc/iopsys/certificates
 	$(CP) $(PKG_BUILD_DIR)/scripts/cert_server_ca.pem $(1)/etc/iopsys/certificates

ice-client/files/ice-client.uci_default

@@ -1,15 +1,13 @@
 #!/bin/sh
 
 grep -rq "^ice:" /etc/passwd || {
-	adduser -D -H -s /bin/false ice
+	local password="$(db get hw.board.wpaKey)"
+	if [ -n "$password" ]; then
+		adduser -D -H -s /bin/false ice
+		(echo $password; sleep 1; echo $password) | passwd ice >/dev/null 2>&1
+	fi
 }
 
-uci -q delete passwords.ice
-uci -q set passwords.ice=usertype
-uci -q set passwords.ice.password="\$WPAKEY"
-uci -q add_list passwords.ice._access_r=root
-uci -q commit passwords
-
 uci show rpcd | grep username=.*ice.* >/dev/null || {
 cat >> /etc/config/rpcd << EOF
 
@@ -49,7 +47,6 @@ config login
 	list write 'juci-network-netifd'
 	list write 'juci-owsd'
 	list write 'juci-printer'
-	list write 'juci-realtime-graphs'
 	list write 'juci-samba'
 	list write 'juci-sfp'
 	list write 'juci-snmpd'
@@ -59,7 +56,6 @@ config login
 	list write 'juci-usb'
 	list write 'core'
 	list write 'unauthenticated'
-
 EOF
 }
 

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2017-11-24
+PKG_VERSION:=3.0-2017-05-01
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d74b88913f676ebf9a210c4674555d080e57ff52
+PKG_SOURCE_VERSION:=5a1b5c439524c56dca7a1921d4cf2fcd2d4c1ff0
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -66,10 +66,6 @@ define Build/Prepare
 endef
 endif
 
-ifeq ($(CONFIG_TARGET_IBOARDID),"EX400")
-TARGET_CFLAGS += -DEX400
-endif
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
 
@@ -133,11 +129,9 @@ define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(CP) ./files/icwmp.hotplug $(1)/etc/hotplug.d/iface/90-icwmp
 ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(INSTALL_DIR) $(1)/usr/share/icwmp
 	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp

icwmp/files/icwmp.hotplug

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-grep -q "Designated" /etc/banner || exit 0
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-local islan="$(uci -q get network.$INTERFACE.is_lan)"
-[ "$islan" == "1" ] && exit 0
-
-local proto="$(uci -q get network.$INTERFACE.proto)"
-[ "$proto" == "none" ] && exit 0
-
-local ifname="$(uci -q get network.$INTERFACE.ifname)"
-[ "${ifname:0:1}" == "@" ] && exit 0
-
-mkdir -p /tmp/ipv4
-
-local previpaddr=""
-local curipaddr=""
-local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-previpaddr=$(cat $ipaddrfile 2>/dev/null)
-network_get_ipaddr curipaddr $INTERFACE
-[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-local prevgateway=""
-local curgateway=""
-local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-prevgateway=$(cat $gatewayfile 2>/dev/null)
-network_get_gateway curgateway $INTERFACE
-[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-local prevsubnets=""
-local cursubnets=""
-local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-prevsubnets=$(cat $subnetsfile 2>/dev/null)
-network_get_subnets cursubnets $INTERFACE
-[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-[ "$previpaddr" = "$curipaddr" -a "$prevgateway" = "$curgateway" -a "$prevsubnets" = "$cursubnets" ] && exit 0
-
-[ -f /etc/config/cwmp ] && /etc/init.d/icwmpd reload &
-

ifbt/Makefile

@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ifbt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=da97d6668d3c0e3f2be226c66b406e90179ada81
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@private.inteno.se:ifbt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ifbt
-	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-	TITLE:=Fast BSS Transition
-endef
-
-define Package/ifbt/description
-	ifbt is Iopsys application for fast BSS transition
-endef
-
-define Package/ifbt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ifbt))

inbd/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=92f918d26c0ffc22d1704f5ea6cbb0bd7fdbdab9
+PKG_SOURCE_VERSION:=2d474e9ff37b9cfcffd4b9ac8eba8db03eb38a21
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se/inbd
 

inteno-netmodes/Makefile

@@ -12,7 +12,6 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/inteno-netmodes
   CATEGORY:=Base system
-  DEPENDS:=+fping
   TITLE:=Predefined Network Modes
 endef
 

inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-firewall-handler

@@ -0,0 +1,53 @@
+#!/bin/sh
+
+[ "$INTERFACE" != "wan" ] && exit
+
+. /lib/functions/network.sh
+
+network_get_ipaddr ip $INTERFACE
+
+[ -z "$ip" ] && exit
+
+toggle_firewall() {
+	local section=$1
+	local disable=$2
+	config_get name "$1" name
+	if [ "$name" == "wan" ]; then
+		uci -q set firewall.settings.disabled=$disable
+		if [ "$disable" == "1" ]; then
+			uci -q set firewall.$section.input="ACCEPT"
+		else
+			uci -q set firewall.$section.input="REJECT"
+		fi
+		uci -q commit firewall
+	fi
+}
+
+set_disabled() {
+	config_load firewall
+	config_foreach toggle_firewall zone $1
+}
+
+test_ip() {
+	if [ -n "$(echo $ip | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ]; then
+		# private IP
+		set_disabled 1
+	else
+		# public IP
+		set_disabled 0
+		[ "$1" -eq "1" ] && {
+			uci set netmode.setup.repeaterready=0
+			uci commit netmode
+			local pid="$(ps | grep wificontro[l] | awk '/repeater/ {print $1}')"
+			[ "$pid" != "" ] && kill $pid
+			pid="$(pidof netmode-client-detect)"
+			[ "$pid" == "" ] && /sbin/netmode-client-detect &
+		}
+	fi
+}
+
+case "$(uci -q get netmode.setup.curmode)" in
+                repeater*) test_ip ;;
+		*) [ "$(uci -q get netmode.setup.repeaterready)" == "1" ] && test_ip 1;;
+esac
+

inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-handler

@@ -1,119 +0,0 @@
-#!/bin/sh
-
-[ "$INTERFACE" != "wan" ] && exit
-
-. /lib/functions/network.sh
-
-network_get_ipaddr ip $INTERFACE
-repeaterready="$(uci -q get netmode.setup.repeaterready)"
-
-[ -z "$ip" ] && exit
-
-toggle_firewall() {
-	local section=$1
-	local disable=$2
-	config_get name "$1" name
-	if [ "$name" == "wan" ]; then
-		uci -q set firewall.settings.disabled=$disable
-		if [ "$disable" == "1" ]; then
-			uci -q set firewall.$section.input="ACCEPT"
-		else
-			uci -q set firewall.$section.input="REJECT"
-		fi
-		uci -q commit firewall
-	fi
-}
-
-set_disabled() {
-	config_load firewall
-	config_foreach toggle_firewall zone $1
-	/etc/init.d/firewall reload
-}
-
-is_inteno_macaddr()
-{
-	macaddr=$1
-
-	echo $macaddr | grep -i -e "^00:22:07" \
-				-e "^02:22:07" \
-				-e "^44:D4:37" \
-				-e "^00:0C:07" \
-				-e "^02:0C:07" \
-				-e "^06:0C:07" \
-				-e "^00:0C:43" \
-				-e "^02:0C:43" \
-				-e "^06:0C:43" \
-	&& return
-	false
-}
-
-switch_mode() {
-	[ "$repeaterready" == "1" ] || return
-
-	# flush the ip on br-lan; br-lan will anyhow be deleted.
-	# this is needed if the ip received on the wan is also from the same net
-	ip addr flush dev br-lan
-
-	# flush iptables in case the MASTER
-	# tries to configure us before
-	# firewall is disabled the proper way
-	iptables -F
-
-	ubus call leds set  '{"state" : "allflash"}'
-
-	local ret=0
-	# let netmode-conf up to 20 seconds before switching mode
-	for tm in 2 4 6 8; do
-		if [ -f /tmp/wificontrol.txt ]; then
-			ret=1
-			break
-		fi
-		sleep $tm
-	done
-
-	# let netmode-conf take over
-	[ $ret -eq 1 ] && return
-
-	# go head with switching mode
-	touch -f /tmp/switching_mode
-	echo "Switching to 'extender' mode" > /dev/console
-	uci -q set netmode.setup.curmode='repeater'
-	uci set netmode.setup.repeaterready=0
-	uci commit netmode
-	/etc/init.d/netmode reload
-	echo "Restarting network services" > /dev/console
-	ubus call network reload
-	wifi reload nodat
-	ubus call router.network reload
-	ubus call leds set  '{"state" : "normal"}'
-	rm -f /tmp/switching_mode
-}
-
-test_ip() {
-	if [ -n "$(echo $ip | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ]; then
-		# private IP
-		switch_mode
-		set_disabled 1
-	else
-		# public IP
-		set_disabled 0
-		[ "$1" -eq "1" ] && {
-			uci set netmode.setup.repeaterready=0
-			uci commit netmode
-			local pid="$(ps | grep wificontro[l] | awk '/repeater/ {print $1}')"
-			[ "$pid" != "" ] && kill -9 $pid
-			pid="$(pidof netmode-client-detect)"
-			[ "$pid" == "" ] && /sbin/netmode-client-detect &
-
-			# set default JUCI page to overview
-			uci -q set juci.juci.homepage="overview"
-			uci commit juci
-		}
-	fi
-}
-
-case "$(uci -q get netmode.setup.curmode)" in
-		repeater*) test_ip ;;
-		*) [ "$repeaterready" == "1" ] && test_ip 1;;
-esac
-

inteno-netmodes/files/etc/hotplug.d/iface/70-shiftrange

@@ -1,251 +0,0 @@
-#!/bin/sh
-# this scripts shifts the lan network prefixes
-# if a wan interface has the same network prefix.
-
-. /lib/functions.sh
-. /lib/functions/network.sh
-
-local lockfile="/tmp/70-shiftrange.lock"
-local restricted_nets=""
-local all_nets=""
-
-
-#####
-##### initial functions
-#####
-
-initial_check()
-{
-	# run only on ifup
-	[ "$ACTION" == "ifup" ] || exit 0
-
-	# run only for uplink (not is_lan) interfaces
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" != "1" ] || exit 0
-
-	# run only if the uplink interface has a configured protocol
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" != "none" ] || exit 0
-}
-
-finish()
-{
-    lock -u $lockfile
-    rm -f $lockfile
-}
-
-# just one instance of this script at a time
-just_one_instance()
-{
-	local counter=0
-	local limit=10
-
-	#wait for the lock to become free
-	while [ -e $lockfile ] ; do
-		sleep 1
-		counter=$((counter + 1))
-		[ "$counter" -gt "$limit" ] && exit 1
-	done
-
-	lock $lockfile
-	trap finish EXIT INT TERM
-}
-
-
-#####
-##### helper functions
-#####
-
-#given a an ip and a mask in the form of "192.168.1.1/24"
-#return the network address like "192.168.1.0/24"
-get_network_address()
-{
-	local ip="$1"
-	[ -z "$ip" ] && return
-
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local mask=$((0xFFFFFFFF >> (32 - $prefix) << (32 - $prefix)))
-	local network=$(($ip & $mask))
-
-	local n1=$((($network & 0xFF000000) >> 24))
-	local n2=$((($network & 0x00FF0000) >> 16))
-	local n3=$((($network & 0x0000FF00) >> 8))
-	local n4=$(( $network & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4/$prefix"
-}
-
-#given a network address (192.168.1.0/24)
-#find the next network address (192.168.2.0/24)
-next_network_address()
-{
-	local ip=$1
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local one=$((1 << (32-$prefix)))
-	local new=$(($ip + $one))
-
-	local n1=$((($new & 0xFF000000) >> 24))
-	local n2=$((($new & 0x00FF0000) >> 16))
-	local n3=$((($new & 0x0000FF00) >> 8))
-	local n4=$(( $new & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4/$prefix"
-}
-
-# given a network address and a prefix (192.168.2.0/24)
-# return the first host ip available   (192.168.2.1)
-first_host_in_network ()
-{
-	local ip=$1
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local new=$(($ip + 1))
-
-	local n1=$((($new & 0xFF000000) >> 24))
-	local n2=$((($new & 0x00FF0000) >> 16))
-	local n3=$((($new & 0x0000FF00) >> 8))
-	local n4=$(( $new & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4"
-}
-
-# given a network address,
-# find the next available network address.
-shift_range()
-{
-	local net="$1"
-	while true ; do
-		if [ "$restricted_nets" == "${restricted_nets//$net/}" ] && [ "$all_nets" == "${all_nets//$net/}" ]; then
-			# found a net that is not in restricted nets nor in all nets
-			break
-		fi
-		net=$(next_network_address $net)
-	done
-
-	echo "$net"
-}
-
-
-#####
-##### parse all interfaces section
-#####
-
-# restricted_nets = all the IPs on wan interfaces
-# all_nets = all the IPs on any interface
-parse_interface()
-{
-	local interface=$1
-	local nets=""		# "192.168.1.1/24"
-	local networks=""	# "192.168.1.0/24"
-
-	config_get is_lan $interface is_lan
-	network_get_subnets nets $interface
-
-	for n in $nets ; do
-		networks="$networks $(get_network_address $n)"
-	done
-
-	[ "$is_lan" != "1" ] && restricted_nets="$restricted_nets $networks"
-	all_nets="$all_nets $networks"
-}
-
-# parse all the interfaces
-# get all the IPs on wan interfaces and store them in restrict_nets
-# get all the IPs on all interfaces and store them in all_nets
-parse_interfaces()
-{
-	config_foreach parse_interface "interface"
-}
-
-
-#####
-##### parse all lan interfaces section
-#####
-
-parse_lan()
-{
-	local interface=$1
-	local nets=""
-	local ips=""
-	local newips=""
-	local ips_changed=0
-
-	[ "$interface" == "loopback" ] && return
-	config_get is_lan $interface is_lan
-	[ "$is_lan" == "1" ] || return
-
-	network_get_subnets ips $interface
-
-	for ip in $ips ; do
-		net="$(get_network_address $ip)"
-
-		if [ "$restricted_nets" == "${restricted_nets//$net/}" ] ; then
-			# net is not in restricted nets
-			# append ip to newips
-			[ -z "$newips" ] && newips="${ip%/*}" ||  newips="$newips ${ip%/*}"
-			continue
-		fi
-
-		#net is in restricted_nets
-		local newnet=$(shift_range $net)
-		local newip="$(first_host_in_network $newnet)"
-		# append newip to newips
-		[ -z "$newips" ] && newips="$newip" ||  newips="$newips $newip"
-
-		ips_changed=1
-		logger "$0: Changing the ip on interface $interface from $ip to $newip/${newnet##*/}"
-		echo "$0: Changing the ip on interface $interface from $ip to $newip/${newnet##*/}" >/dev/console
-	done
-
-	#assign the new ips
-	if [ "$ips_changed" == "1" ] ; then
-		uci -q set network.$interface.ipaddr="$newips"
-	fi
-}
-
-# parse all the interface with is_lan=1
-parse_lans()
-{
-	config_foreach parse_lan "interface"
-}
-
-
-#####
-##### main
-#####
-
-main()
-{
-	initial_check
-	just_one_instance
-
-	config_load network
-	parse_interfaces
-	parse_lans
-
-	if [ -n "$(uci changes network)" ] ; then
-		ubus call uci commit '{"config":"network"}'
-	fi
-}
-
-main $@

inteno-netmodes/files/etc/hotplug.d/net/80-repeater

@@ -52,7 +52,6 @@ link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
 case "$ACTION" in
 	add|register)
 		[ "$link" == "down" ] && return
-		ubus call leds set  '{"state" : "allflash"}'
 		echo "Autoswitch to Extender mode" > /dev/console
 		sleep 2
 		wetif="$(get_wifi_wet_interface)"
@@ -67,14 +66,10 @@ case "$ACTION" in
 		uci set network.wan.ifname="$(echo $WANDEV $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$wetif //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
 		uci commit network
 		ubus call network reload
-		[ -f /usr/sbin/wlctl ] && wlctl -i $wetif bss down 2>/dev/null
 		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-		ubus call router.network reload
-		ubus call leds set  '{"state" : "normal"}'
 	;;
 	remove|unregister)
 		[ "$link" == "up" ] && return
-		ubus call leds set  '{"state" : "allflash"}'
 		echo "Autoswitch to Repeater mode" > /dev/console
 		sleep 2
 		wetif="$(get_wifi_wet_interface)"
@@ -89,14 +84,9 @@ case "$ACTION" in
 		uci set network.wan.ifname="$(echo $wetif $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$WANDEV //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
 		uci commit network
 		ubus call network reload
-		[ -f /usr/sbin/wlctl ] && wlctl -i $wetif bss up 2>/dev/null
 		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || {
-			killall -9 wifi
 			wifi reload nodat
 			killall -USR1 udhcpc
 		}
-		ubus call router.network reload
-		ubus call leds set  '{"state" : "normal"}'
 	;;
 esac
-

inteno-netmodes/files/etc/init.d/netmode

@@ -3,9 +3,6 @@
 START=10
 USE_PROCD=1
 
-TMPDIR=/var/netmodes
-OLD_MODE_FILE=/var/netmodes/old_mode
-
 . /usr/share/libubox/jshn.sh
 . /lib/network/config.sh
 
@@ -44,29 +41,13 @@ get_device() {
 
 populate_netmodes() {
 	[ -f /etc/config/netmode -a -d $modedir ] || return
-	local curmode
-
-	config_load netmode
-
-	config_get curmode setup curmode
-
-	mkdir -p $TMPDIR
-
-	if [ "$curmode" == "routed" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="routed_mtk"
-		else
-			curmode="routed_brcm"
-		fi
-	fi
-
-	echo $curmode > $OLD_MODE_FILE
 
 	delete_netmode() {
 		uci delete netmode.$1
 	}
 
+	config_load netmode
+
 	config_foreach delete_netmode netmode
 	uci commit netmode
 
@@ -181,20 +162,17 @@ populate_netmodes() {
 
 switch_netmode() {
 	[ -f /etc/config/netmode -a -d $modedir ] || return
-
-	local netreload="$1"
-	local curmode conf repeaterready old_mode
+	local curmode conf repeaterready
 
 	config_load netmode
 
-	config_get curmode setup curmode
-
 	config_get repeaterready setup repeaterready "0"
 	if [ "$repeaterready" == "1" ] ; then
 		uci -q set netmode.setup.repeaterready="0"
 		uci commit netmode
 	fi
 
+	config_get curmode setup curmode
 	if [ "$curmode" == "repeater" ]; then
 		local hw="$(db -q get hw.board.hardware)"
 		if [ "$hw" == "EX400" ]; then
@@ -215,17 +193,6 @@ switch_netmode() {
 		uci set netmode.setup.curmode="$curmode"
 		uci commit netmode
 	fi
-
-	old_mode=`cat $OLD_MODE_FILE 2>/dev/null`
-
-        # if curmode has not changed do not copy configs
-        if [ "$curmode" == "$old_mode" ]; then
-                /etc/init.d/enviroment reload
-                return
-        fi
-
-        echo $curmode >$OLD_MODE_FILE
-
 	[ -d "/etc/netmodes/$curmode" ] || return
 	cp /etc/netmodes/$curmode/* /etc/config/
 	rm -f /etc/config/DETAILS
@@ -234,35 +201,19 @@ switch_netmode() {
 	local askcred=$(uci -q get netmode.$curmode.askcred)
 	if [ "$reboot" == "0" ]; then
 		/etc/init.d/enviroment reload
-		case "$curmode" in
-			routed*)
-				ubus call uci commit '{"config":"network"}'
-			;;
-			repeater*)
-				if [ -f /etc/init.d/omcproxy ]; then
-					/etc/init.d/omcproxy stop
-				fi
-				if [ "$netreload" != "0" ]; then
-					ubus call uci commit '{"config":"network"}'
-				fi
-			;;
-		esac
 	else
 		reboot &
 	fi
 }
 
 start_client_listener() {
-	local curmode repeaterready ulcpid
-
+	local curmode repeaterready
 	config_load netmode
-	config_get repeaterready setup repeaterready 0
 
-	ulcpid=$(ps | grep "ubus listen client" | grep -v grep | awk '{print$1}')
+	config_get repeaterready setup repeaterready 0
 
 	[ $repeaterready -eq 1 ] && {
 		killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-		kill -9 $ulcpid >/dev/null 2>&1
 		return
 	}
 
@@ -271,7 +222,6 @@ start_client_listener() {
 	case "$curmode" in
 		repeater*)
 			killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-			kill -9 $ulcpid >/dev/null 2>&1
 		;;
 		*)
 			pidof netmode-client-detect || /sbin/netmode-client-detect &
@@ -279,45 +229,23 @@ start_client_listener() {
 	esac
 }
 
-start_netmode_discover() {
-	local curmode repeaterready
-
-	killall -9 netmode-discover >/dev/null 2>&1
-
-	config_load netmode
-	config_get repeaterready setup repeaterready 0
-
-	[ $repeaterready -eq 1 ] && return
-
-	config_get curmode setup curmode
-
-	case "$curmode" in
-		repeater*)
-			/sbin/netmode-discover &
-		;;
-	esac
-}
-
 start_service() {
 	populate_netmodes
 	start_client_listener
-	start_netmode_discover
 }
 
 reload_service() {
-        switch_netmode "$1"
+        switch_netmode
 
 	# set default JUCI page to overview
 	uci -q set juci.juci.homepage="overview"
 	uci commit juci
 
 	start_client_listener
-	start_netmode_discover
 }
 
 stop_service() {
 	killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-	killall -9 netmode-discover >/dev/null 2>&1
 }
 
 service_triggers()

inteno-netmodes/files/etc/netmodes/bridged/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS

@@ -11,8 +11,7 @@
 	"excluded_boards" : [
 		"CG300",
 		"CG301",
-		"EX400",
-		"F*"
+		"EX400"
 	],
 	"acl" : [
 		"admin",

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/DETAILS

@@ -11,8 +11,10 @@
 		"DG15*",
 		"DG40*",
 		"EG40*",
-		"EX40*",
-		"F*"
+		"EX40*"
+	],
+	"acl" : [
+		"admin"
 	],
 	"uplink_band" : "b",
 	"credentials" : 1,

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -34,7 +27,7 @@ config wifi-device 'wl0'
 	option rifs '0'
 	option rifs_advert '0'
 	option maxassoc '32'
-	option beamforming '1'
+	option beamforming '0'
 	option doth '1'
 	option dfsc '1'
 

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/DETAILS

@@ -11,8 +11,10 @@
 		"DG15*",
 		"DG40*",
 		"EG40*",
-		"EX40*",
-		"F*"
+		"EX40*"
+	],
+	"acl" : [
+		"admin"
 	],
 	"uplink_band" : "b",
 	"credentials" : 1,

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -34,7 +27,7 @@ config wifi-device 'wl0'
 	option rifs '0'
 	option rifs_advert '0'
 	option maxassoc '32'
-	option beamforming '1'
+	option beamforming '0'
 	option doth '1'
 	option dfsc '1'
 

inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/DETAILS

@@ -8,8 +8,7 @@
 		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
 	],
 	"excluded_boards" : [
-		"*G*",
-		"F*"
+		"*G*"
 	],
 	"uplink_band" : 'b',
 	"credentials" : 1,

inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/wireless

@@ -4,20 +4,14 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device  ra0
 	option band b
-	option channel  auto
+	option channel  1
 	option bandwidth '20'
-	option hwmode   auto
+	option hwmode   11n
 	option htmode   HT20
 	option country 'DE'
+	option beamforming 0
 
 config wifi-iface
 	option device   ra0
@@ -27,16 +21,15 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	ra0
-	option wps_pbc	1
 
 config wifi-device  rai0
 	option band a
-	option channel  auto
+	option channel  36
 	option bandwidth '80'
 	option hwmode   11ac
 	option htmode   VHT80
 	option country 'DE'
-	option beamforming 1
+	option beamforming 0
 
 config wifi-iface
 	option device   rai0
@@ -46,7 +39,6 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	rai0
-	option wps_pbc	1
 
 config wifi-iface
 	option device   ra0

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS

@@ -8,8 +8,7 @@
 		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 5G & Downlink 2.4G + 5G" }
 	],
 	"excluded_boards" : [
-		"*G*",
-		"F*"
+		"*G*"
 	],
 	"uplink_band" : 'a',
 	"credentials" : 1,

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -4,20 +4,14 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device  ra0
 	option band b
-	option channel  auto
+	option channel  1
 	option bandwidth '20'
-	option hwmode   auto
+	option hwmode   11n
 	option htmode   HT20
 	option country 'DE'
+	option beamforming 0
 
 config wifi-iface
 	option device   ra0
@@ -27,16 +21,15 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	ra0
-	option wps_pbc	1
 
 config wifi-device  rai0
 	option band a
-	option channel  auto
+	option channel  36
 	option bandwidth '80'
 	option hwmode   11ac
 	option htmode   VHT80
 	option country 'DE'
-	option beamforming 1
+	option beamforming 0
 
 config wifi-iface
 	option device   rai0
@@ -46,7 +39,6 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	rai0
-	option wps_pbc	1
 
 config wifi-iface
 	option device   rai0

inteno-netmodes/files/etc/netmodes/routed_brcm/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'

inteno-netmodes/files/etc/netmodes/routed_mtk/DETAILS

@@ -8,10 +8,8 @@
 		{ "sv" : "" }
 	],
 	"excluded_boards" : [
-		"*G*",
-		"F*"
+		"*G*"
 	],
-	"reboot" : 0,
 	"credentials" : 0
 }
 

inteno-netmodes/files/etc/netmodes/routed_mtk/omcproxy

@@ -1,10 +0,0 @@
-config proxy
-	option scope global
-	option uplink wan
-	list downlink lan
-
-config proxy
-	option scope global
-	option uplink wan6
-	list downlink lan
-

inteno-netmodes/files/etc/netmodes/routed_mtk/wireless

@@ -4,20 +4,14 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device  ra0
 	option band b
-	option channel  auto
+	option channel  1
 	option bandwidth '20'
-	option hwmode   auto
+	option hwmode   11n
 	option htmode   HT20
 	option country 'DE'
+	option beamforming 0
 
 config wifi-iface
 	option device   ra0
@@ -26,16 +20,15 @@ config wifi-iface
 	option ssid     Inteno-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps_pbc	1
 
 config wifi-device  rai0
 	option band a
-	option channel  auto
+	option channel  36
 	option bandwidth '80'
 	option hwmode   11ac
 	option htmode   VHT80
 	option country 'DE'
-	option beamforming 1
+	option beamforming 0
 
 config wifi-iface
 	option device   rai0
@@ -44,5 +37,4 @@ config wifi-iface
 	option ssid     Inteno-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps_pbc	1
 

inteno-netmodes/files/sbin/netmode-client-detect

@@ -9,48 +9,28 @@ local action ipaddr macaddr network
 
 timed_check() {
 	while true; do
-		network=${network:-lan}
-		ubus call repeater get_creds '{"network":"'$network'","file":"/tmp/wificontrol.txt"}'
 		wificontrol --router
 		sleep $1
 	done
 }
 
-is_inteno_macaddr()
-{
-	macaddr=$1
-
-	echo $macaddr | grep -i -e "^00:22:07" \
-				-e "^02:22:07" \
-				-e "^44:D4:37" \
-				-e "^00:0C:07" \
-				-e "^02:0C:07" \
-				-e "^06:0C:07" \
-				-e "^00:0C:43" \
-				-e "^02:0C:43" \
-				-e "^06:0C:43" \
-	&& return
-	false
-}
 
 timed_check 60 &
 
-while true ; do
-	ubus listen client | \
-	while read event ; do
-		#echo "netmode-client-detect got event: $event" >/dev/console
-		json_load "$event"
-		json_select client
-		json_get_var action action
-		[ "$action" == "connect" ] || continue
-		json_get_var macaddr macaddr
-		json_get_var ipaddr ipaddr
-		json_get_var network network "lan"
+ubus listen client | \
+while read event ; do
+	#echo "netmode-client-detect got event: $event" >/dev/console
+	json_load "$event"
+	json_select client
+	json_get_var action action
+	[ "$action" == "connect" ] || continue
+	json_get_var macaddr macaddr
+	json_get_var ipaddr ipaddr
+	json_get_var network netwrork "lan"
 
-		if is_inteno_macaddr $macaddr; then
-			echo "netmode-client-detect: a new Inteno device detected on '$network' network (MACAddr:$macaddr IPAddr:$ipaddr)" >/dev/console
-			ubus call repeater get_creds '{"network":"'$network'","file":"/tmp/wificontrol.txt"}'
-			/sbin/wificontrol --router --destination $ipaddr
-		fi
-	done
+	if echo $macaddr | grep -i -e "^00:22:07" -e "^44:D4:37" -e "^02:0C:07" -e "^06:0C:07"; then
+		echo "netmode-client-detect: a new Inteno device detected on '$network' network (MACAddr:$macaddr IPAddr:$ipaddr)" >/dev/console
+		ubus call repeater get_creds '{"network":"'$network'","file":"/tmp/wificontrol.txt"}'
+		/sbin/wificontrol --router --destination $ipaddr
+	fi
 done

inteno-netmodes/files/sbin/netmode-conf

@@ -3,22 +3,17 @@
 . /usr/share/libubox/jshn.sh
 . /lib/functions.sh
 
-state="exit"
-TMPPATH="/tmp/netmode_config_backup"
-CURMODE=""
-SLEEPTIME=300
+local state="exit"
 
 set_wireless_values() {
 	local iface_num="$1"
 	local ssid="$2"
 	local key="$3"
 	local encryption="$4"
-	local device="$5"
 	local old_ssid old_key old_encryption
 	if ! uci -q get wireless.@wifi-iface[$iface_num] >/dev/null 2>&1; then
 		state="reload"
 		uci add wireless wifi-iface >/dev/null 2>&1
-		uci set wireless.@wifi-iface[$iface_num].device="$device"
 	fi
 	local network="$(uci -q get wireless.@wifi-iface[$iface_num].network)"
 	old_ssid="$(uci -q get wireless.@wifi-iface[$iface_num].ssid)"
@@ -59,13 +54,10 @@ get_iface_num() {
 	local dev
 	while true; do
 		[ $i -gt 100 ] && break ## just a safty messure
-		if ! uci -q get wireless.@wifi-iface[$i] >/dev/null; then
-			break
-		fi
 		mode="$(uci -q get wireless.@wifi-iface[$i].mode)"
-		if [ "$mode" == "wet" -o "$mode" == "sta" ]; then
+		if [ "$mode" != "ap" ]; then
 			i=$((i+1))
-			continue
+			break
 		fi
 		dev="$(uci -q get wireless.@wifi-iface[$i].device)"
 		if [ "$dev" != "$device" ]; then
@@ -81,45 +73,11 @@ get_iface_num() {
 	eval "export -- \"$__save=$i\""
 }
 
-restore() {
-	if [ "$1" == "back" ]; then
-		uci set juci.juci.homepage='netmode-wizard'
-		uci commit juci
-		cp $TMPPATH/* /etc/config/
-		uci set netmode.setup.curmode=$CURMODE
-		uci commit netmode
-		ubus call network reload
-		wifi reload
-		ubus call router.network reload
-	fi
-	rm -r $TMPPATH
-	ubus call leds set '{"state":"normal"}'
-}
-
-backup() {
-	mkdir -p $TMPPATH
-	cp /etc/config/* $TMPPATH/
-	CURMODE="$(uci -q get netmode.setup.curmode)"
-	ubus call leds set '{"state":"allflash"}'
-}
-
 ###### START HERE #######
 
-file="$1"
-from_gui="$2"
-
+local file="$1"
 [ -f "$file" ] || exit
 
-# let netmode-handler up to 20 seconds to finish switching mode
-for tm in 2 4 6 8; do
-	if [ ! -f /tmp/switching_mode ]; then
-		break
-	fi
-	sleep $tm
-done
-
-[ "$from_gui" == "true" ] && backup
-
 json_load "`cat $file`"
 json_select "wifi_ifaces"
 
@@ -150,23 +108,15 @@ local dummy band ssid key encryption device iface_num
 while json_get_var dummy $i; do
 	json_select $i
 	json_get_var band band
-	[ "$band" == "" -o "$apcliband" == "$band" ] && break
+	[ "$apcliband" == "$band" ] && break
 	json_select ..
 	i=$((i+1))
 done
 
-[ "$apcliband" == "$band" -o "$band" == "" ] || {
-	[ "$from_gui" == "true" ] && restore "back"
-	exit
-}
+[ "$apcliband" == "$band" ] || exit
 
 repeater_iface_num=$(uci -q show wireless | grep -e ".mode='wet'" -e ".mode='sta'"  | sed 's/.*\[\([0-9]\)\].*/\1/')
-
-[ -z "$repeater_iface_num" ] && {
-	[ "$from_gui" == "true" ] && restore "back"
-	exit
-}
-
+[ -z "$repeater_iface_num" ] && exit
 json_get_var ssid ssid
 json_get_var key key
 json_get_var encryption encryption
@@ -184,57 +134,27 @@ i=1
 while json_get_var dummy $i; do
 	json_select $i
 	json_get_var band band
+	get_device "$band" device
+	case $band in
+		a)
+			get_iface_num "$device" "$a_num" iface_num
+			a_num=$((a_num+1))
+			;;
+		b)
+			get_iface_num "$device" "$b_num" iface_num
+			b_num=$((b_num+1))
+			;;
+	esac
+	[ -z $iface_num ] && return
 	json_get_var ssid ssid
 	json_get_var encryption encryption
 	json_get_var key key
-	if [ "$band" == "" ]; then
-		get_device "a" device
-		get_iface_num "$device" "$a_num" iface_num
-		a_num=$((a_num+1))
-		[ -z $iface_num ] && {
-			[ "$from_gui" == "true" ] && restore "back"
-			exit
-		}
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-		get_device "b" device
-                get_iface_num "$device" "$b_num" iface_num
-                b_num=$((b_num+1))
-                [ -z $iface_num ] && {
-                        [ "$from_gui" == "true" ] && restore "back"
-                        exit
-                }
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-	else
-		get_device "$band" device
-		case $band in
-			a)
-				get_iface_num "$device" "$a_num" iface_num
-				a_num=$((a_num+1))
-				;;
-			b)
-				get_iface_num "$device" "$b_num" iface_num
-				b_num=$((b_num+1))
-				;;
-		esac
-		[ -z $iface_num ] && {
-			[ "$from_gui" == "true" ] && restore "back"
-			exit
-		}
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-	fi
-	i=$((i+1))
+	set_wireless_values "$iface_num" "$ssid" "$key" "$encryption"
 	json_select ..
+	i=$((i+1))
 done
 
-i=$((b_num + a_num + 1))
-
-if [ $repeater_iface_num -gt $i ]; then
-	i=$((i-1))
-fi
-
 while uci -q get wireless.@wifi-iface[$i] >/dev/null; do
-	# if repeater_iface_num is greater than the number of
-	# configured downlink we need to make sure its not deleted
 	local mode="$(uci -q get wireless.@wifi-iface[$i].mode)"
 	if [ "$mode" == "wet" -o "$mode" == "sta" ]; then
 		i=$((i+1))
@@ -242,47 +162,19 @@ while uci -q get wireless.@wifi-iface[$i] >/dev/null; do
 	fi
 	state="reload"
 	uci -q delete wireless.@wifi-iface[$i] >/dev/null
-	# do not increment i. The next interface will now
-	# have the same index as the deleted interface
+	i=$((i+1))
 done
 
 uci commit wireless
 
-if [ "$from_gui" == "true" ]; then
-	# check for connectivity
+if [ "$state" == "exit" ]; then
+	return
+elif [ "$state" == "apply" ]; then
+	# wifi apply
 	wifi reload
-	[ -f /etc/init.d/layer2_interface_ethernet -a -f /etc/config/layer2_interface_ethernet ] && /etc/init.d/layer2_interface_ethernet reload
-	i=$SLEEPTIME;
-
-	while [ $i -gt 0 ]; do
-		ip=`route -n | awk '/^0.0.0.0/{print $2}'`
-		if [ "$ip" == "" ]; then
-			i=$((i-10))
-			sleep 10
-			continue
-		fi
-		ping -w1 $ip
-		if [ $? -eq 0 ]; then
-			restore
-			exit
-		else
-			i=$((i-10))
-			sleep 9
-		fi
-	done
-	restore "back"
 else
-	if [ "$state" == "exit" ]; then
-		return
-	fi
-	ubus call leds set '{"state":"allflash"}'
-	if [ "$state" == "apply" ]; then
-		# wifi apply
-		wifi reload
-	else
-		# wifi reload
-		wifi reload
-	fi
-	[ -f /etc/init.d/layer2_interface_ethernet -a -f /etc/config/layer2_interface_ethernet ] && /etc/init.d/layer2_interface_ethernet reload
-	ubus call leds set '{"state":"normal"}'
+	# wifi reload
+	wifi reload
 fi
+
+[ -f /etc/init.d/layer2_interface_ethernet -a -f /etc/config/layer2_interface_ethernet ] && /etc/init.d/layer2_interface_ethernet reload

inteno-netmodes/files/sbin/netmode-discover

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-local unlisted mac ipaddr netmask mask
-
-mask_to_cidr() {
-    nbits=0
-    IFS=.
-    for dec in $1 ; do
-        case $dec in
-            255) let nbits+=8;;
-            254) let nbits+=7;;
-            252) let nbits+=6;;
-            248) let nbits+=5;;
-            240) let nbits+=4;;
-            224) let nbits+=3;;
-            192) let nbits+=2;;
-            128) let nbits+=1;;
-            0);;
-            *) echo "Error: $dec is not recognised"; exit 1
-        esac
-    done
-    echo "$nbits"
-}
-
-while true; do
-	unlisted=0
-
-	ps | grep -q wifi | grep -q reload || {
-		for mac in $(brctl showmacs br-wan 2>/dev/null | tail -n +2 | grep no | awk '{print$2}'); do
-			grep -q "$mac" /proc/net/arp || unlisted=$((unlisted+1))
-		done
-
-		ipaddr=$(ifconfig br-wan | grep -v inet6 | grep inet | tr ':' ' ' | awk '{print$3}')
-		netmask=$(ifconfig br-wan | grep -v inet6 | grep inet | tr ':' ' ' | awk '{print$7}')
-		mask=$(mask_to_cidr $netmask)
-	}
-
-	if [ $unlisted -gt 0 -a -n "$ipaddr" -a -n "$netmask" ]; then
-		fping -c 1 -t 1000 -g $ipaddr/$mask -q >/dev/null 2>&1
-	fi
-
-	sleep 20
-done
-

inteno-netmodes/files/sbin/netmode-repeater-correction

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-MTK=0
-[ "$(db -q get hw.board.hardware)" == "EX400" ] && MTK=1
-
-if [ $MTK -eq 1 ]; then
-	WANDEV="eth0.2"
-	link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
-else
-	WANDEV="$(uci get layer2_interface_ethernet.Wan.ifname)"
-	link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
-fi
-
-[ "$link" == "up" ] && action=add
-[ "$link" == "down" ] && action=remove
-[ -z "$action" ] && exit
-
-# trigger a fake hotplug net event
-INTERFACE=$WANDEV ACTION=$action /sbin/hotplug-call net

inteno-netmodes/files/usr/libexec/rpcd/repeater

@@ -7,7 +7,7 @@ get_if_creds() {
 	local section=$1
 	local network=$2
 	local net dev ssid key encryption band
-	config_get net $section "network" "lan"
+	config_get net $section "network"
 	if [ "$net" == "$network" ]; then
 		config_get dev $section "device"
 		band="$(uci -q get wireless.$dev.band)"
@@ -15,6 +15,7 @@ get_if_creds() {
 		config_get key $section key
 		config_get encryption $section encryption
 		config_get disabled $section disabled 0
+		echo "disabled for $band = $disabled" >>/tmp/dbg
 		[ $disabled -eq 1 ] && return
 		[ "$ssid" == "" -o "$band" == "" ] && return
 		json_add_object
@@ -86,7 +87,7 @@ duplicate_if_single_radio() {
 
 case "$1" in
 	list)
-		echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
+		echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str" } }'
 	;;
 	call)
 		case "$2" in
@@ -120,11 +121,10 @@ case "$1" in
 				json_dump
 			;;
 			set_creds)
-				local file from_gui
+				local file
 				read input
 				json_load "$input"
 				json_get_var file file
-				json_get_var from_gui from_gui
 				validate_file "$file" || write_error "invalid filename (\"$file\"), file must be in /tmp and exist"
 				json_load "`cat $file`" || write_error "invalid file content"
 				json_select "wifi_ifaces" || write_error "invalid file content"
@@ -134,7 +134,7 @@ case "$1" in
 				json_add_string "status" success
 				json_dump
 
-				netmode-conf "$file" "$from_gui" >/dev/null 2>&1 &
+				netmode-conf $file >/dev/null 2>&1 &
 			;;
 		esac
 	;;

iop/configs/config

@@ -56,7 +56,6 @@ CONFIG_PACKAGE_juci-dropbear=y
 CONFIG_PACKAGE_juci-ethernet=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
-CONFIG_PACKAGE_juci-ice-client=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
 CONFIG_PACKAGE_juci-inteno-backup=y
@@ -95,7 +94,6 @@ CONFIG_PACKAGE_libdaemon=y
 CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
 CONFIG_PACKAGE_libreadline=y
-CONFIG_PACKAGE_loop-detector=m
 CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mtd-utils=y
@@ -117,7 +115,6 @@ CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
 CONFIG_PACKAGE_ppp-mod-pppol2tp=y
-CONFIG_PACKAGE_ppp-mod-pptp=y
 CONFIG_PACKAGE_ppp-multilink=y
 # CONFIG_PACKAGE_ppp is not set
 CONFIG_PACKAGE_qos-scripts=y
@@ -159,14 +156,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
 CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
 CONFIG_BUSYBOX_CONFIG_HTTPD=y
 CONFIG_BUSYBOX_CONFIG_INSMOD=y
-CONFIG_BUSYBOX_CONFIG_MODINFO=y
-CONFIG_BUSYBOX_CONFIG_MODPROBE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODPROBE_BLACKLIST=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
-CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
-CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
 CONFIG_BUSYBOX_CONFIG_LSMOD=y

iop/scripts/extract_core.sh

@@ -6,12 +6,15 @@ function extract_core {
 	topdir=$(pwd)
 
 	# Paths to packages that should be exported.
-	paths+='package/network/services/base-files '
+	paths+='package/network/services/samba36 '
 	paths+='package/network/services/dnsmasq '
+	paths+='package/network/services/dropbear '
+	paths+='package/network/services/odhcpd '
 	paths+='package/network/config/firewall '
 	paths+='package/network/config/netifd '
 	paths+='package/network/config/qos-scripts '
-	paths+='package/system/procd '
+	paths+='package/network/utils/iproute2 '
+	paths+='package/network/utils/curl '
 	paths+='package/utils/busybox '
 
 	function print_usage {

iop/scripts/genconfig.sh

@@ -9,13 +9,14 @@ function genconfig {
 	CURRENT_CONFIG_FILE=".current_config_file"
 	export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"
 	CUSTPATH="customerconfigs"
+	CUSTREPO="git@private.inteno.se:customerconfigs"
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
 	export DEVELOPER=0
 	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
 
-	iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25 hpc_hu02"
-	iopsys_brcm63xx_arm="dg400 eg400 f104w f104 dg400prime dg400primeb 963138REF_P502"
+	iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
+	iopsys_brcm63xx_arm="dg400 eg400"
 	iopsys_ramips="ex400"
 	ramips="mt7621"
 	target="bogus"
@@ -105,7 +106,7 @@ function genconfig {
 		local ALL="$1"
 		local CUSTOMER="$2"
 		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common | grep -v juci-theme)"
+			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common)"
 			if [ "$boards" ]; then
 				echo "$CUSTOMER has following boards:"
 				for board in $boards; do
@@ -119,10 +120,10 @@ function genconfig {
 			exit 1
 		elif [ -d $CUSTCONF ]; then
 			local customers="$(ls -1 $CUSTCONF)"
-			if [ "$customers" -a "$ALL" == 1 ]; then
+			if [ "$customers" -a "$1" == 1 ]; then
 				for customer in $customers; do
 					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common | grep -v juci-theme)"
+					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common)"
 					if [ "$boards" ]; then
 						for board in $boards; do
 							echo -e "\t$board"
@@ -155,17 +156,15 @@ function genconfig {
 
 	setup_dirs()
 	{
-		if ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -qw ${CUSTREPO:22}; then
+		if [ $DEVELOPER -eq 1 ]; then
 			if [ ! -d "$CUSTPATH" ]; then
-				git clone "$CUSTREPO" "$CUSTPATH"
+			git clone "$CUSTREPO" "$CUSTPATH"
 			elif [ $IMPORT -eq 1 ]; then
-				cd $CUSTPATH
-				v "git pull"
-				git pull
-				cd - >/dev/null #go back
+			cd $CUSTPATH
+			v "git pull"
+			git pull
+			cd - >/dev/null #go back
 			fi
-		else
-			echo "You do not have access to $CUSTREPO"
 		fi
 
 		if [ ! -d "$FILEDIR" ]; then
@@ -193,18 +192,9 @@ function genconfig {
 		if [ $target == "bogus" ]; then
 			echo "Hardware profile does not exist"
 			exit 1
-		elif [ -n "$CUSTOMER" ]; then
-			if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-				echo "Customer profile for '$CUSTOMER' does not exist"
-				exit 1
-			elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-				echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-				if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					echo "Common profile configuration will be used"
-				else
-					exit 1
-				fi
-			fi
+		elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
+			echo "Customer profile does not exist"
+			exit 1
 		fi
 
 		# Generate base config
@@ -276,9 +266,9 @@ function genconfig {
 		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
 
 		# developer mode selected ?
-		echo "CONFIG_DEVEL=y" >>.config
 		if [ $DEVELOPER -eq 1 ]; then
 			# rewrite url to clone with ssh instead of http
+			echo "CONFIG_DEVEL=y" >>.config
 			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
 			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
 			[ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
@@ -286,6 +276,7 @@ function genconfig {
 			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
 			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
 		else
+			echo "CONFIG_DEVEL=n" >>.config
 			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
 			echo "CONFIG_ICE_OPEN=y" >> .config
@@ -301,11 +292,6 @@ function genconfig {
 		# Needed to disable kmods for iopsys-brcm targets
 		touch package/kernel/linux/Makefile
 
-		# we need to signal to bradcom SDK that we have changed the board id
-		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
-		# so just touch that file.
-		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-				
 		# Set default values based on selected parameters
 		v "$(make defconfig 2>&1)"
 
@@ -344,7 +330,6 @@ function genconfig {
 			-n|--no-update) export IMPORT=0;;
 			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
 			-p|--profile) export PROFILE="$2"; shift;;
-			-r|--repo) export CUSTREPO="$2"; shift;;
 			-s|--override) export SRCTREEOVERR=1;;
 			-h|--help) usage;;
 			-l|--list) list_customers 0 $2;;
@@ -358,9 +343,6 @@ function genconfig {
 			esac
 			shift;
 		done
-
-		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
-
 		setup_dirs
 		create_and_copy_files "$1" "$2"
 	fi

iop/scripts/generate_tarballs.sh

@@ -3,15 +3,15 @@
 
 build_bcmkernel_consumer() {
 	local tarfile bcmkernelcommith sdkversion
-	sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
+    sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
 	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/feed_inteno_broadcom/bcmkernel/$sdkversion.mk | cut -d'=' -f2)
 	# do not build bcmopen sdk if it was already built before
-	ssh $SERVER "ls $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz" && return
+	ssh $SERVER "ls $FPATH/bcmopen-$profile-$bcmkernelcommith.tar.gz" && return
 	cd ./build_dir/target-*_uClibc-0.9.33.*/bcmkernel-3.4-$sdkversion/bcm963xx/release
 	sh do_consumer_release -p $profile -y
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
 	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
-	scp $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
+	scp $tarfile $SERVER:$FPATH/bcmopen-$profile-$bcmkernelcommith.tar.gz
 	rm -f $tarfile
 	cd $curdir
 }
@@ -109,7 +109,6 @@ function generate_tarballs {
     git remote -v | grep -q http && return # do not continue if this is an open SDK environment
 
     target=$(grep CONFIG_TARGET_BOARD .config | cut -d'=' -f2 | tr -d '"')
-    board=$(grep CONFIG_TARGET_IBOARDID .config | cut -d'=' -f2 | tr -d '"')
     profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
     curdir=$(pwd)
 

iop/scripts/ssh_sysupgrade.sh

@@ -34,7 +34,7 @@ function ssh_sysupgrade_latest {
 		exit 1
 	fi
 	{ cd `dirname $0`
-		IMAGE=`ls -Art bin/*/*.y[23] | tail -n1`
+		IMAGE=`ls -Art bin/*/*.y2 | tail -n1`
 		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
 	}
 }

iop/scripts/update_package.sh

@@ -394,7 +394,7 @@ insert_hash_in_feeds_config()
 check_packages()
 {
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
-    echo "Now checking if any changes have been done to the packages."
+    echo "Now checking if any changes has been done to the packages."
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
 
     # only scan in the build directory that is currently in use.
@@ -536,7 +536,7 @@ check_feeds()
 	    read answer
 
 	    case $answer in
-		n|N|'')
+		n|N)
 		    continue;;
 	    esac
 	    branch_uptodate feeds/${feed}

iup/Makefile

@@ -21,7 +21,7 @@ define Package/iup
 endef
 
 define Package/iup/description
-	This package contains Inteno's IUP Client
+	This package contains Intenos IUP Client
 endef
 
 define Build/Compile

iup/files/sbin/iup

@@ -4,7 +4,6 @@ echo $$ > /var/run/iup.pid
 
 . /lib/functions.sh
 . /lib/functions/network.sh
-. /lib/functions/savecfg.sh
 . /usr/share/libubox/jshn.sh
 
 include /lib/upgrade
@@ -14,30 +13,20 @@ export IUPCONFFILES=/tmp/iup/sysupgrade.conffiles.tar.gz
 export IUPMD5=/etc/configchecksums
 export CONFILESLURP='/tmp/iup/*.conf'
 export IUPTEMP="/tmp/iup"
+export IUPUSERCFG="/tmp/iupusercfg"
+export IUPUSERCFG_WIFI="/tmp/iupusercfg_wifi"
 export INTERACTIVE=0
 export VERBOSE=0
 export CONF=1
-export DESKEY=
-export MAC=
+export DESKEY=$(cat /proc/nvram/DesKey | tr -d '\n' | hexdump -e '16/1 "%02x"')
+export MAC=$(cat /proc/nvram/BaseMacAddr)
 export RANGE=10
 export RETRYSTOP=5
 export SLEEP=10
-
-local sysinfo=$(ubus call router.system info)
-json_load "$sysinfo"
-json_select system
-json_get_var MAC basemac
-json_select ..
-json_select keys
-json_get_var DESKEY des
-json_select ..
-
-# MAC lowercase to uppercase and remove ':'
-MAC=$(echo $MAC | tr '[a-z]' '[A-Z]' | tr -d ':')
-
-# Convert DESKEY to HEX format
-DESKEY=$(echo $DESKEY | tr -d '\n' | hexdump -e '16/1 "%02x"')
-
+#remove whitespace
+MAC=${MAC// /}
+#lower to upper Conversion
+MAC=$(echo $MAC | tr '[a-z]' '[A-Z]')
 
 # no verbose:	no output
 # -v		log to system log
@@ -80,7 +69,41 @@ reload ()
 
 save_usercfg()
 {
-	savecfg_save_config fw_redirect fw_parental wifi
+	rm -f $IUPUSERCFG $IUPUSERCFG_WIFI
+	touch $IUPUSERCFG $IUPUSERCFG_WIFI
+
+	# save the firewall redirects/port forwarding
+	uci show firewall | grep redirect >> $IUPUSERCFG
+
+	# save the parental rules
+	local parentalrules=$(uci show firewall | grep -i "Parental Rule" | grep -o "rule\[.*\]")
+	for rule in $parentalrules ; do
+		rule=${rule//\[/\\[} # escape [
+		rule=${rule//]/\]} # escape ]
+		uci show firewall | grep "$rule" >>$IUPUSERCFG
+	done
+
+	# tranfsorm the output of uci show into a uci script
+
+	# prepend "set" to each line NOT containing "]="
+	# firewall.@redirect[0].enabled='1' becomes
+	# set firewall.@redirect[0].enabled='1'
+	sed -i '/.*]=.*/! s/.*/set \0/' $IUPUSERCFG
+
+	# prepend "add" to each line containing "]="
+	# AND keep only the package name (before the first dot) and section type (after equal)
+	# firewall.@redirect[0]=redirect becomes
+	# add firewall redirect
+	sed -i 's/\(.*\)\..*]=\(.*\)/add \1 \2/' $IUPUSERCFG
+
+	# change all the array indexes to [-1]
+	sed -i 's/\[.\?.\?.\?.\?\]/[-1]/' $IUPUSERCFG
+
+	# commit at the end of the script
+	[ -s $IUPUSERCFG ] && echo "commit" >> $IUPUSERCFG
+
+	# save wireless interfaces
+	uci show wireless | grep "wifi-iface" > $IUPUSERCFG_WIFI
 }
 
 apply_usercfg()
@@ -91,11 +114,64 @@ apply_usercfg()
 	config_get_bool keep configserver keepuserconfig "0"
 	v "apply_usercfg(): keepuserconfig = $keep"
 	if [ "$keep" != "1" ] ; then
-		savecfg_rm_files
+		rm -f $IUPUSERCFG $IUPUSERCFG_WIFI
 		return
 	fi
 
-	savecfg_apply_config fw_redirect fw_parental wifi
+	local index ifname network
+	local newindex newifname newnetwork
+
+	# loop through all the user wifi-ifaces
+	for index in $(seq 0 99) ; do
+		ifname=$(sed -n 's/.*wifi-iface\['$index'\]\.ifname='\''\(.*\)'\''/\1/p' $IUPUSERCFG_WIFI )
+		[ "$ifname" ] || break
+		network=$(sed -n 's/.*wifi-iface\['$index'\]\.network='\''\(.*\)'\''/\1/p' $IUPUSERCFG_WIFI )
+
+		newindex=""
+		newifname=""
+		newnetwork=""
+
+		# loop through all the newly configured wifi-ifaces
+		for newindex in $(seq 0 99) ; do
+			newifname=$( uci show wireless | grep wifi-iface | sed -n 's/.*wifi-iface\['$newindex'\]\.ifname='\''\(.*\)'\''/\1/p' )
+			if [ -z "$newifname" ] ; then
+				# no newifname means that all the wifi-ifaces have already been parsed
+				newindex="-1"
+				break
+			fi
+			newnetwork=$(uci show wireless | grep wifi-iface | sed -n 's/.*wifi-iface\['$newindex'\]\.network='\''\(.*\)'\''/\1/p' )
+
+			# two wifi interfaces are the same if "ifname" and "network" are the same
+			if [ "$newifname" == "$ifname" ] && [ "$newnetwork" == "$network" ] ; then
+				break
+			fi
+		done
+
+		# prepend "set" to each line NOT containing "]="
+		# wireless.@wifi-iface[$index].<option>='<value>' becomes
+		# set wireless.@wifi-iface[$index].<option>='<value>'
+		sed -i '/.*]=.*/! s/\(.*\[\)'$index'\(\].*\)/set \1'$newindex'\2/' $IUPUSERCFG_WIFI
+
+		if [ "$newindex" == "-1" ] ; then
+			# prepend "add" to each line containing "]="
+			# AND keep only the package name (before the first dot) and section type (after equal)
+			# wireless.@wifi-iface[0]=wifi-iface becomes
+			# add wireless wifi-iface
+			sed -i 's/\(.*\)\..*\['$index'\]=\(.*\)/add \1 \2/' $IUPUSERCFG_WIFI
+		else
+			# no need to create a new uci section, just delete the line defining a new section
+			sed -i '/\(.*\)\..*\['$index'\]=\(.*\)/d' $IUPUSERCFG_WIFI
+		fi
+
+	done
+	# commit at the end of the script
+	[ -s $IUPUSERCFG_WIFI ] && echo "commit" >> $IUPUSERCFG_WIFI
+
+	# run the uci batch scripts
+	cat $IUPUSERCFG | uci batch >/dev/null 2>&1
+	cat $IUPUSERCFG_WIFI | uci batch >/dev/null 2>&1
+
+	rm -f $IUPUSERCFG $IUPUSERCFG_WIFI
 }
 
 handle_provisioning() {
@@ -195,7 +271,7 @@ handle_Downloaded_file()
 					for f in $CONFILESLURP
 					do
 						v "File to be applied $f and config $(cat $f)"
-						uci -f $f import
+						uci import -f $f
 					done
 					pack=$(get_packages $CONFILESLURP)
 					v "Packages to be commited: $pack"
@@ -400,6 +476,8 @@ parse_dhcp_options()
 	json_get_var vlanid vlanid # option 132
 	json_get_var vlanpriority vlanpriority # option 133
 
+	v "Processing dhcp options"
+
 	if [ $privopt224 ]; then
 		v "dhcp option 224 firmware url $privopt224"
 		handle_option224 $privopt224
@@ -477,22 +555,13 @@ wait_for_default_gateway()
 			return 0
 		fi
 
-		# try the nameservers too
-		for ns in $(grep nameserver /var/resolv.conf.auto | awk '{print $2}'); do
-			if ping -q -w 1 -c 1 $device $ns >/dev/null 2>&1 ; then
-				[ "$wait_time" -lt "60" ] && v "Name server $ns is reachable"
-				sleep $wait_interval
-				return 0
-			fi
-		done
-
-		v "Waiting for default gateway or name server. Countdown $wait_time seconds"
+		v "Waiting for default gateway. Countdown $wait_time seconds"
 		sleep $wait_interval
 		wait_time=$((wait_time - wait_interval))
 		[ "$wait_time" -le "0" ] && break # timer expired
 	done
 
-	return 1 # default gateway and name server are not reachable
+	return 1 # default gateway not reachable
 }
 
 
@@ -518,7 +587,7 @@ main()
 	done
 
 	if ! wait_for_default_gateway ; then
-		v "Neither default gateway nor name server are reachable. Aborting iup."
+		v "Default gateway is not reachable. Aborting iup."
 		exit 1
 	fi
 

layer2interface/broadcom/etc/hotplug.d/switch/10-switch

@@ -1,113 +0,0 @@
-. /lib/network/config.sh
-
-# FIX: for EG300 WAN port for release 3.13.1 - 4.x
-if [ "$INTERFACE" == "eth2" ]; then
-	touch /var/update.eth2
-fi
-# end FIX
-
-addif() {
-	# check if wan had a event and start all related services
-	wan=`uci -q get layer2_interface_ethernet.Wan.baseifname`
-	if [ "$INTERFACE" == "$wan" ]; then
-		/etc/init.d/layer2_interface_ethernet start
-		/etc/init.d/layer2_interface_vlan start
-	fi
-}
-
-delif() {
-	##remove ethernet wan and nuke any vlans associated
-	wan=`uci -q get layer2_interface_ethernet.Wan.baseifname`
-	if [ "$INTERFACE" == "$wan"  ]; then
-		/etc/init.d/layer2_interface_ethernet stop
-	fi
-}
-
-# true if speed on interface is Gbit
-gigatest() {
-	local speed=$(ethctl $INTERFACE media-type 2>&1 | awk '{if (NR == 2) print $6}')
-	case "$speed" in
-		1000*) return 0 ;;
-		*) return 1 ;;
-	esac
-}
-
-# true if there is a link on any lan port
-lan_test () {
-	local landev=$(db get hw.board.ethernetLanPorts)
-	local ledontest
-	for dev in $landev; do
-		ledontest=$(cat /sys/class/net/$dev/operstate)
-		if [ "$ledontest" == "up" ]; then
-			return 0
-		fi
-	done
-	return 1
-}
-
-# true if adsl or vdsl is up.
-dsltest() {
-	if cat /var/state/layer2_interface 2>/dev/null | grep 'adsl\|vdsl' | grep up; then
-		return 0
-	else
-		return 1
-	fi
-}
-
-case "$ACTION" in
-	add|register)
-		case "$PHYSDEVDRIVER" in
-			natsemi) sleep 1 ;;
-		esac
-		addif
-		local interfname=$(interfacename $INTERFACE)
-		local operstate=$(cat /sys/class/net/$INTERFACE/operstate)
-#		if [ "$operstate" == "up" ]; then
-		if true ; then
-			case "$interfname" in
-				GbE*)
-					ubus call led.lan           set '{"state" : "ok"}'
-					ubus call led.gbe           set '{"state" : "ok"}'
-					ubus call led.gbe_phy_link  set '{"state" : "ok"}'
-					ubus call led.gbe_phy_speed set '{"state": "off"}'
-					$(gigatest) && ubus call led.gbe_phy_speed set '{"state":"ok"}'
-				;;
-				LAN*)
-					ubus call led.lan set '{"state":"ok"}'
-				;;
-				WAN*)
-					ubus call led.wan           set '{"state" : "ok"}'
-					ubus call led.wan_phy_link  set '{"state" : "ok"}'
-					ubus call led.wan_phy_speed set '{"state" : "off"}'
-					$(gigatest) && ubus call led.wan_phy_speed set '{"state":"ok"}'
-				;;
-			esac
-		fi		
-	;;
-	remove|unregister)
-		local interfname=$(interfacename $INTERFACE)
-		local operstate=$(cat /sys/class/net/$INTERFACE/operstate)
-		if [ "$operstate" == "down" ]; then
-			case "$interfname" in
-				GbE*)
-					ubus call led.gbe           set '{"state" : "off"}'
-					ubus call led.gbe_phy_link  set '{"state" : "off"}'
-					ubus call led.gbe_phy_speed set '{"state" : "off"}'
-					$(lan_test) || ubus call led.lan set '{"state":"off"}'
-				;;
-				LAN*)
-					$(lan_test) || ubus call led.lan set '{"state":"off"}'
-				;;
-				WAN*)
-					ubus call led.wan           set '{"state" : "off"}'
-					ubus call led.wan_phy_speed set '{"state" : "off"}'
-					ubus call led.wan_phy_link  set '{"state" : "off"}'
-					# is this needed here ?? don't the dsl hotplug event control this ???
-#					$(dsltest) || ubus call led.dsl set '{"state":"off"}'
-				;;
-			esac
-		fi
-		delif
-	;;
-esac
-

layer2interface/broadcom/etc/init.d/layer2_interface

@@ -16,7 +16,6 @@ start_service() {
 	local AnnexL
 	local ADSL2plus
 	local VDSL2
-	local GFast
 	local a8a
 	local b8b
 	local c8c
@@ -24,14 +23,11 @@ start_service() {
 	local a12a
 	local b12b
 	local a17a
-	local a30a
-	local b35b
 	local US0
 	local bitswap
 	local sra
 	local vdsl
 
-
 	config_load layer2_interface
 	config_get Glite capabilities Glite
 	config_get GDmt capabilities GDmt
@@ -40,7 +36,6 @@ start_service() {
 	config_get ADSL2plus capabilities ADSL2plus
 	config_get AnnexL capabilities AnnexL
 	config_get VDSL2 capabilities VDSL2
-	config_get GFast capabilities GFast
 	config_get AnnexM capabilities AnnexM
 
 	config_get a8a capabilities 8a
@@ -50,9 +45,6 @@ start_service() {
 	config_get a12a capabilities 12a
 	config_get b12b capabilities 12b
 	config_get a17a capabilities 17a
-	config_get a30a capabilities 30a
-	config_get b35b capabilities 35b
-	config_get BrcmPriv1 capabilities BrcmPriv1
 
 	config_get US0 capabilities US0
 	config_get bitswap capabilities bitswap
@@ -66,7 +58,6 @@ start_service() {
 	ADSL2plus=$(echo $ADSL2plus | sed 's/Enabled\|1/p/g')
 	AnnexM=$(echo $AnnexM | sed 's/Enabled\|1/m/g')
 	VDSL2=$(echo $VDSL2 | sed 's/Enabled\|1/v/g')
-	GFast=$(echo $GFast | sed 's/Enabled\|1/f/g')
 
 	a8a=$(echo $a8a | sed 's/Enabled\|1/8a/g')
 	b8b=$(echo $b8b | sed 's/Enabled\|1/8b/g')
@@ -75,10 +66,7 @@ start_service() {
 	a12a=$(echo $a12a | sed 's/Enabled\|1/12a/g')
 	b12b=$(echo $b12b | sed 's/Enabled\|1/12b/g')
 	a17a=$(echo $a17a | sed 's/Enabled\|1/17a/g')
-	a30a=$(echo $a30a | sed 's/Enabled\|1/30a/g')
-	b35b=$(echo $b35b | sed 's/Enabled\|1/BrcmPriv1/g')
-	BrcmPriv1=$(echo $BrcmPriv1 | sed 's/Enabled\|1/BrcmPriv1/g')
-	[ -n "$b35b" ] && BrcmPriv1=""
+
 	US0=$(echo $US0 | sed 's/1/on/g')
 	US0=$(echo $US0 | sed 's/0/off/g')
 	bitswap=$(echo $bitswap | sed 's/1/on/g')
@@ -95,17 +83,13 @@ start_service() {
 	json_get_var vdsl vdsl
 
 	if [ $vdsl -eq 1 ]; then
-		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2$GFast --profile \"$a8a $b8b $c8c $d8d $a12a $b12b $a17a $a30a $b35b $BrcmPriv1\" --sra $sra --bitswap $bitswap --us0 $US0"
-		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2$GFast --profile "$a8a $b8b $c8c $d8d $a12a $b12b $a17a $a30a $b35b $BrcmPriv1" --sra $sra --bitswap $bitswap --us0 $US0
+		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2 --profile \"$a8a $b8b $c8c $d8d $a12a $b12b $a17a\" --sra $sra --bitswap $bitswap --us0 $US0"
+		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2 --profile "$a8a $b8b $c8c $d8d $a12a $b12b $a17a" --sra $sra --bitswap $bitswap --us0 $US0
 	else
 		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM --sra $sra --bitswap $bitswap"
 		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM --sra $sra --bitswap $bitswap
 	fi
 
-	if [ "$GFast" == "f" ]; then
-		# enable V43 tone set for GFAST
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x400000 0x400000
-	fi
 }
 
 

layer2interface/broadcom/etc/init.d/layer2_interface_ethernet

@@ -50,11 +50,10 @@ addethernet() {
 	config_get baseifname $1 baseifname
 	config_get ifname $1 ifname
 	config_get bridge $1 bridge
-	config_get mac2 $1 mac2
 	
 	ifname="${ifname:-$baseifname.1}"
 
-	brcm_virtual_interface_rules "$baseifname" "$ifname" "$bridge" "$mac2"
+	brcm_virtual_interface_rules "$baseifname" "$ifname" "$bridge"
 
 }
 

layer2interface/broadcom/etc/uci-defaults/20-layer2-config-generate

@@ -1,13 +1,30 @@
 #!/bin/sh
 
-local hasEthWan="$(db -q get hw.board.hasEthWan)"
-hasEthWan=${hasEthWan:-1}
+local hasEthWan="1"
 local hasAdsl="$(db -q get hw.board.hasAdsl)"
 local hasVdsl="$(db -q get hw.board.hasVdsl)"
 
 local LANPORTS="$(db -q get hw.board.ethernetLanPorts)"
 local WANPORTS=""
 
+# populate layer2_interface_ethernet #
+if [ "$hasEthWan" == "1" ]; then
+	local wanEthernetPort="$(db -q get hw.board.ethernetWanPort)"
+	wanEthernetPort="${wanEthernetPort:-eth0}"
+	if [ ! -f /etc/config/layer2_interface_ethernet -o -z "$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_ethernet <<EOF
+config ethernet_interface 'Wan'
+	option name 'WAN'
+	option baseifname '${wanEthernetPort}'
+	option ifname '${wanEthernetPort}.1'
+EOF
+	fi
+	local ifname="$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)"
+	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
+elif [ "$hasEthWan" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_ethernet
+fi
+
 # populate layer2_interface #
 if [ "$hasAdsl" == "1" ]; then
 	if [ ! -f /etc/config/layer2_interface -o -z "$(uci -q get layer2_interface.capabilities)" ]; then
@@ -43,28 +60,6 @@ elif [ "$hasAdsl" == "0" -a "$hasVdsl" == "0" ]; then
 	echo "" > /etc/config/layer2_interface
 fi
 
-# populate layer2_interface_vdsl #
-if [ "$hasVdsl" == "1" ]; then
-	local wanVdslPort=$(db -q get hw.board.vdslWanPort)
-	wanVdslPort="${wanVdslPort:-ptm0}"
-	if [ ! -f /etc/config/layer2_interface_vdsl -o -z "$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)" ]; then
-		cat > /etc/config/layer2_interface_vdsl <<EOF
-config vdsl_interface
-	option 'unit' '0'
-	option 'ifname' '${wanVdslPort}.1'
-	option 'baseifname' '${wanVdslPort}'
-	option 'name' 'VDSL2'
-	option 'dslat' '1'
-	option 'ptmprio' '1'
-	option 'ipqos' '1'
-EOF
-	fi
-	local ifname="$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)"
-	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
-elif [ "$hasVdsl" == "0" ]; then
-	echo "" > /etc/config/layer2_interface_vdsl
-fi
-
 # populate layer2_interface_adsl #
 if [ "$hasAdsl" == "1" ]; then
 	local wanAdslPort=$(db -q get hw.board.adslWanPort)
@@ -89,22 +84,26 @@ elif [ "$hasAdsl" == "0" ]; then
 	echo "" > /etc/config/layer2_interface_adsl
 fi
 
-# populate layer2_interface_ethernet #
-if [ "$hasEthWan" == "1" ]; then
-	local wanEthernetPort="$(db -q get hw.board.ethernetWanPort)"
-	wanEthernetPort="${wanEthernetPort:-eth0}"
-	if [ ! -f /etc/config/layer2_interface_ethernet -o -z "$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)" ]; then
-		cat > /etc/config/layer2_interface_ethernet <<EOF
-config ethernet_interface 'Wan'
-	option name 'WAN'
-	option baseifname '${wanEthernetPort}'
-	option ifname '${wanEthernetPort}.1'
+# populate layer2_interface_vdsl #
+if [ "$hasVdsl" == "1" ]; then
+	local wanVdslPort=$(db -q get hw.board.vdslWanPort)
+	wanVdslPort="${wanVdslPort:-ptm0}"
+	if [ ! -f /etc/config/layer2_interface_vdsl -o -z "$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_vdsl <<EOF
+config vdsl_interface
+	option 'unit' '0'
+	option 'ifname' '${wanVdslPort}.1'
+	option 'baseifname' '${wanVdslPort}'
+	option 'name' 'VDSL2'
+	option 'dslat' '1'
+	option 'ptmprio' '1'
+	option 'ipqos' '1'
 EOF
 	fi
-	local ifname="$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)"
+	local ifname="$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)"
 	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
-elif [ "$hasEthWan" == "0" ]; then
-	echo "" > /etc/config/layer2_interface_ethernet
+elif [ "$hasVdsl" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_vdsl
 fi
 
 # populate network config ifnames #

layer2interface/broadcom/lib/network/brcmwifi.sh

@@ -261,7 +261,6 @@ wlmngr_startWsc()
 	nvram set wps_timeout_enable=0
 	#nvram get wps_config_method
 	nvram set wps_version2=enabled # extra
-	nvram set wps_oob_configured=1
 	nvram set lan_wps_oob=disabled # extra
 	nvram set lan_wps_reg=enabled # extra
 

layer2interface/broadcom/lib/network/vlan.sh

@@ -161,38 +161,12 @@ addbrcmvlan()
 	fi
 }
 
-update_last_mac_group()
-{
-	local ifname=$1
-	local last_mac_group=$2
-
-	local full_mac modified_mac dev_mac
-
-	full_mac="$(ifconfig $ifname | awk '{print $NF; exit}')"
-
-	[ "${full_mac}" == "" ] && return
-
-	modified_mac="${full_mac:0:15}${last_mac_group}"
-
-	devs="wl0 wl1 bcmsw"
-
-	for dev in $devs; do
-		dev_mac="$(ifconfig $dev | awk '{print $NF; exit}')"
-		if [ "$dev_mac" == "$modified_mac" ]; then
-			return
-		fi
-	done
-
-	ifconfig $ifname hw ether "${modified_mac}"
-}
-
 
 brcm_virtual_interface_rules()
 {
 	local baseifname=$1
 	local ifname=$2
 	local bridge=$3
-	local last_mac_group=$4
 
 	bridge="${bridge:-0}"
 
@@ -256,10 +230,6 @@ brcm_virtual_interface_rules()
 		vlanctl --if $baseifname --rx --tags 0 --set-rxif $ifname --filter-vlan-dev-mac-addr 1 --rule-insert-before -1
 	fi
 
-	if [ "$last_mac_group" != "" ]; then
-		update_last_mac_group $ifname $last_mac_group
-	fi
-
 	ifconfig $ifname up
 	ifconfig $ifname multicast
 }

loop-detector/Makefile

@@ -1,48 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=loop-detector
-PKG_VERSION:=1.0
-
-PKG_SOURCE_VERSION:=d0fb770eacd6691b98df138b60f5116e02f71a9b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/loop-detector
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-
-define Package/loop-detector
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=L2 Loop detector
-  DEPENDS:= +libpcap +libuci +libpthread
-endef
-
-define Package/loop-detector/description
-	L2 Loop detection package
-endef
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE
-
-TARGET_LDFLAGS += \
-	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
-
-CONFIGURE_ARGS += \
-	--with-uci-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-
-define Package/loop-detector/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/loop-detector $(1)/sbin/
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(CP) ./files/loop_detection.init $(1)/etc/init.d/loop_detection
-	$(INSTALL_DIR) $(1)/etc/config
-	$(CP) ./files/loop_detection.config $(1)/etc/config/loop_detection
-endef
-
-$(eval $(call BuildPackage,loop-detector))

loop-detector/files/loop_detection.config

@@ -1,5 +0,0 @@
-config loop-detect loop
-	option enabled '1'
-	option discovery_interval '10'
-	option recovery_check_tries '5'
-

loop-detector/files/loop_detection.init

@@ -1,36 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=21
-STOP=89
-
-USE_PROCD=1
-NAME=loop-detector
-
-start_service() {
-	local enabled
-
-	config_load loop_detection
-	config_get_bool enabled loop enabled 1
-
-	if [ $enabled -eq 1 ]; then
-		procd_open_instance
-		procd_set_param command "/sbin/loop-detector"
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-stop() {
-	service_stop /sbin/loop-detector
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger loop_detection
-}
-
-reload_service() {
-	stop
-	start
-}
-

mtk-bndstrg/Makefile

@@ -5,13 +5,13 @@ PKG_NAME:=mtk-bndstrg
 PKG_VERSION:=1.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=a67f5ccdf9bc6810f15f1ece9edaad5e89cad0f7
+PKG_SOURCE_VERSION:=8a804320c53dead1c9b9f3650cbbc58908c76832
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/mtk-bndstrg
 
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
 
 include $(INCLUDE_DIR)/package.mk
 

natalie-dect/Makefile

@@ -23,7 +23,6 @@ PKG_SOURCE_PROTO:=git
 endif
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_PARALLEL:=0
 
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/image.mk

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=959eca8ab2b50eaccfff9c710cffe5b317bb6ad1
+PKG_SOURCE_VERSION:=ff2cf8bfbd3a04731088e9f4540796696e961382
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se/peripheral_manager
 

port-management/files/etc/init.d/port_management

@@ -62,25 +62,18 @@ get_current_status() {
 	fi
 }
 
-get_flag(){
+sfp_flag(){
 	local port=$1
 	local sfptype=$2
-	local eg300="$(ethctl $port media-type 2>&1 | grep 'This is probably wrong')"
-	local eg400="$(ethctl $port media-type 2>&1 | grep 'Error: Interface eth0 has sub ports, please specified one')"
-	if [ -n "$eg300" ]; then
-		echo "sfp copper"
-	elif [ -n "$eg400" ]; then
-		echo "port 10"
-	else
-		echo ""
-	fi
+	local media="$(ethctl $port media-type 2>&1 | grep 'This is probably wrong')"
+	[ -z "$media" ] && echo "" || echo "sfp $sfptype"
 }
 
 set_port_status() {
 	local port="$1"
 	local status="$2"
-	local flag=$(get_flag $port)
-	local curstatus=$(get_current_status "$port" "$flag")
+	local flag=$(sfp_flag $port "copper")
+	local curstatus=$(get_current_status $port $flag)
 
 	ifconfig $port >/dev/null 2>&1 || return
 
@@ -100,14 +93,14 @@ set_port_status() {
 						esac
 					;;
 					10*AUTO)
-						ethctl $port media-type advertise $status $flag
+						ethctl $port media-type $flag advertise $status
 					;;
 					10*)
-						ethctl $port media-type $status $flag
+						ethctl $port media-type $flag $status
 					;;
 					*)
-						ethctl $port media-type advertise 1000FDAUTO $flag
-						ethctl $port media-type auto $flag
+						ethctl $port media-type $flag advertise 1000FDAUTO
+						ethctl $port media-type $flag auto
 					;;
 				esac
 			else

port-management/files/etc/init.d/sfp_management

@@ -23,24 +23,18 @@ get_current_status() {
 	fi
 }
 
-get_flag(){
+sfp_flag(){
 	local port=$1
-	local eg300="$(ethctl $port media-type 2>&1 | grep 'This is probably wrong')"
-	local eg400="$(ethctl $port media-type 2>&1 | grep 'Error: Interface eth0 has sub ports, please specified one')"
-	if [ -n "$eg300" ]; then
-		echo "sfp fiber"
-	elif [ -n "$eg400" ]; then
-		echo "port 9"
-	else
-		echo ""
-	fi
+	local sfptype=$2
+	local media="$(ethctl $port media-type 2>&1 | grep 'This is probably wrong')"
+	[ -z "$media" ] && echo "" || echo "sfp $sfptype"
 }
 
 set_fiber_status() {
 	local port="$1"
 	local status="$2"
-	local flag=$(get_flag $port)
-	local curstatus=$(get_current_status "$port" "$flag")
+	local flag=$(sfp_flag $port "fiber")
+	local curstatus=$(get_current_status $port $flag)
 
 	case "$status" in
 		disabled)

questd/Makefile

@@ -6,9 +6,9 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=3.1.40
+PKG_VERSION:=3.1.38
 
-PKG_SOURCE_VERSION:=b2794295fdf9469b6cd8ba1544f291d4b83a7d5a
+PKG_SOURCE_VERSION:=85785b97a1526114ae521beacb1b302c3cb914ab
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/questd
 
@@ -43,7 +43,7 @@ export QUESTD_CFLAGS
 
 define Package/questd
 	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +ubus +libpthread +(TARGET_iopsys_ramips_ex400):swconfig +(TARGET_iopsys_ramips_ex400):libnl-tiny +libopenssl
+	DEPENDS:=+libuci +libubox +ubus +libpthread +(TARGET_iopsys_ramips_ex400):swconfig +(TARGET_iopsys_ramips_ex400):libnl-tiny
 	TITLE:=router info daemon
 endef
 

questd/files/etc/init.d/quest

@@ -21,8 +21,8 @@ start_service() {
 }
 
 stop() {
-	#stop_service() is called after procd killed the service
-	echo ;
+	service_stop /sbin/questd
+	service_stop /sbin/graphd
 }
 
 service_triggers()

questd/files/sbin/imonitor

@@ -1,7 +1,6 @@
 #!/bin/sh
 
 . /lib/functions.sh
-. /usr/share/libubox/jshn.sh
 
 # 1. sleep for $SLEEP_LONG seconds
 # 2. run the check_* functions
@@ -23,7 +22,7 @@ NPROC_COUNT=4	# number of time that the NPROC_LIMIT has to be hit to trigger a p
 NPROC_NFAIL=0	# current consecutive Number of FAILures. process restarts when NPROC_NFAIL == NPROC_COUNT
 
 # memmory limit
-MEM_LIMIT=20000
+MEM_LIMIT=50000
 MEM_COUNT=4
 MEM_NFAIL=0
 
@@ -32,9 +31,6 @@ PCPU_LIMIT=38
 PCPU_COUNT=4
 PCPU_NFAIL=0
 
-# network call check
-NNET_NFAIL=0
-
 UBUS_TIMEOUT=5
 
 
@@ -43,7 +39,7 @@ ACSDBIN=$(which acsd)
 
 restart_questd()
 {
-	logger -s -t $0[$$] "Restarting questd. $NPROC_NFAIL $MEM_NFAIL $PCPU_NFAIL $NNET_NFAIL"
+	logger -s -t $0[$$] "Restarting questd. $NPROC_NFAIL $MEM_NFAIL $PCPU_NFAIL"
 
 	killall -q -KILL questd
 	/etc/init.d/quest stop
@@ -53,7 +49,6 @@ restart_questd()
 	NPROC_NFAIL=0
 	MEM_NFAIL=0
 	PCPU_NFAIL=0
-	NNET_NFAIL=0
 }
 
 
@@ -115,38 +110,21 @@ check_pcpu()
 
 check_ubuscall()
 {
-		local rv
+	local rv
 
-		ubus -t $UBUS_TIMEOUT call router.system info >/dev/null 2>&1
-		rv=$?
+	ubus -t $UBUS_TIMEOUT call router.system info >/dev/null 2>&1
+	rv=$?
 
-		[ "$rv" = "0" ] && return 0
-		return 1
+	[ "$rv" = "0" ] && return 0
+	return 1
 }
 
-check_ubus_network_call() {
-	[ "$(uci -q get network.lan)" == "interface" ] || return 0
-	json_load "$(ifstatus lan)" || return 0
-	json_get_var up up
-	[ $up -eq 1 ] || return 0
-	local ifname="$(uci -q get network.lan.ifname)"
-	[ -z "$ifname" -o "${ifname:0:3}" == "br-" ] && return 0
-	ubus -t 5 call router.network ports '{"network":"lan"}' | grep -q statistics || {
-		NNET_NFAIL=1
-		return 1
-	}
-	return 0
-}
 
 restart_bsd()
 {
-	logger -s -t $0[$$] "Restarting WiFi and Band Steering daemon due to bsd hangup."
-	killall -q -15 bsd 2>/dev/null
-	wlctl -i wl0 down 2>/dev/null
-	wlctl -i wl1 down 2>/dev/null
-	wlctl -i wl0 up 2>/dev/null
-	wlctl -i wl1 up 2>/dev/null
-	bsd &
+	logger -s -t $0[$$] "Restarting bsd."
+	killall -q -KILL bsd
+	bsd
 }
 
 check_bsdcall()
@@ -163,13 +141,9 @@ check_bsdcall()
 
 restart_acsd()
 {
-	logger -s -t $0[$$] "Restarting WiFi and Auto Channel Selection daemon due to acsd high CPU usage."
-	killall -q -9 acsd 2>/dev/null
-	wlctl -i wl0 down 2>/dev/null
-	wlctl -i wl1 down 2>/dev/null
-	wlctl -i wl0 up 2>/dev/null
-	wlctl -i wl1 up 2>/dev/null
-	acsd
+	logger -s -t $0[$$] "Restarting acsd."
+	killall -q -KILL acsd
+	acsd &
 }
 
 check_acsd()
@@ -181,7 +155,7 @@ check_acsd()
 
 	for p in $pcpu; do
 		p=${p%%%*}
-		if [ "$p" -ge "40" ]; then
+		if [ "$p" -ge "20" ]; then
 			return 1
 		fi
 	done
@@ -219,11 +193,8 @@ main()
 			"$restart_mem"   = "1" -o \
 			"$restart_pcpu"  = "1" ]
 		then
+			# check_ubuscall || restart_questd
 			restart_questd
-		else
-			if [ "$sample" -ge "$SAMPLES" ]; then
-				check_ubus_network_call || restart_questd
-			fi
 		fi
 
 		if [ "$BSDBIN" ] ; then

samba2/Makefile

@@ -55,14 +55,11 @@ define Package/samba2-client
 endef
 
 TARGET_CFLAGS += $(FPIC)
-WERR := -Werror=format-security
-TARGET_CFLAGS_WITHOUT_WERR := $(filter-out $(WERR),$(TARGET_CFLAGS))
 
 define Build/Compile	
 	rm -rf $(PKG_INSTALL_DIR)
 	mkdir -p $(PKG_INSTALL_DIR)
 	(cd $(PKG_BUILD_DIR)/source ; rm -rf config.{cache,status} ; \
-		CFLAGS="-D_LARGEFILE64_SOURCE -D_GNU_SOURCE" \
 		./configure \
 			$(HOST_CONFIGURE_VARS) \
 			$(HOST_CONFIGURE_ARGS) \
@@ -96,7 +93,7 @@ define Build/Compile
 		clean
 	(cd $(PKG_BUILD_DIR)/source; rm -rf config.{cache,status}; \
 		$(TARGET_CONFIGURE_OPTS) \
-		CFLAGS="$(TARGET_CFLAGS_WITHOUT_WERR) -D_GNU_SOURCE -DNDEBUG -DSHMEM_SIZE=524288" \
+		CFLAGS="$(TARGET_CFLAGS) -D_GNU_SOURCE -DNDEBUG -DSHMEM_SIZE=524288 -Dfcntl=fcntl64" \
 		CPPFLAGS="$(TARGET_CPPFLAGS)" \
 		LDFLAGS="$(TARGET_LDFLAGS) $(LIBGCC_S)" \
 		ac_cv_lib_cups_httpConnect=no \

samba3/Makefile

@@ -8,7 +8,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=samba3
 PKG_VERSION:=3.0.37
-PKG_RELEASE:=2
+PKG_RELEASE:=1
 
 PKG_MD5SUM:=11ed2bfef4090bd5736b194b43f67289
 

samba3/patches/010-samba-3.0.37-CVE-2010-2063.patch

@@ -1,38 +0,0 @@
-diff --git a/source/smbd/process.c b/source/smbd/process.c
-index e861e16..6499bc7 100644
---- a/source/smbd/process.c
-+++ b/source/smbd/process.c
-@@ -1159,6 +1159,7 @@ int chain_reply(char *inbuf,char *outbuf,int size,int bufsize)
- {
- 	static char *orig_inbuf;
- 	static char *orig_outbuf;
-+	static int orig_size;
- 	int smb_com1, smb_com2 = CVAL(inbuf,smb_vwv0);
- 	unsigned smb_off2 = SVAL(inbuf,smb_vwv1);
- 	char *inbuf2, *outbuf2;
-@@ -1178,6 +1179,13 @@ int chain_reply(char *inbuf,char *outbuf,int size,int bufsize)
- 		/* this is the first part of the chain */
- 		orig_inbuf = inbuf;
- 		orig_outbuf = outbuf;
-+		orig_size = size;
-+	}
-+
-+	/* Validate smb_off2 */
-+	if ((smb_off2 < smb_wct - 4) || orig_size < (smb_off2 + 4 - smb_wct)) {
-+		exit_server_cleanly("Bad chained packet");
-+		return -1;
- 	}
- 
- 	/*
-@@ -1192,6 +1200,11 @@ int chain_reply(char *inbuf,char *outbuf,int size,int bufsize)
- 	SSVAL(outbuf,smb_vwv1,smb_offset(outbuf+outsize,outbuf));
- 	SCVAL(outbuf,smb_vwv0,smb_com2);
- 
-+	if (outsize <= smb_wct) {
-+		exit_server_cleanly("Bad chained packet");
-+		return -1;
-+	}
-+
- 	/* remember how much the caller added to the chain, only counting stuff
- 		after the parameter words */
- 	chain_size += outsize - smb_wct;

samba3/patches/020-samba-3.0.37-CVE-2010-3069.patch

@@ -1,82 +0,0 @@
-diff --git a/source/lib/util_sid.c b/source/lib/util_sid.c
-index 032be9a..2c5a0c7 100644
---- a/source/lib/util_sid.c
-+++ b/source/lib/util_sid.c
-@@ -403,6 +403,9 @@ BOOL sid_parse(const char *inbuf, size_t len, DOM_SID *sid)
- 
- 	sid->sid_rev_num = CVAL(inbuf, 0);
- 	sid->num_auths = CVAL(inbuf, 1);
-+	if (sid->num_auths > MAXSUBAUTHS) {
-+		return false;
-+	}
- 	memcpy(sid->id_auth, inbuf+2, 6);
- 	if (len < 8 + sid->num_auths*4)
- 		return False;
-diff --git a/source/libads/ldap.c b/source/libads/ldap.c
-index 7479894..eebc0fd 100644
---- a/source/libads/ldap.c
-+++ b/source/libads/ldap.c
-@@ -1771,7 +1771,9 @@ static void dump_sid(const char *field, struct berval **values)
- 	int i;
- 	for (i=0; values[i]; i++) {
- 		DOM_SID sid;
--		sid_parse(values[i]->bv_val, values[i]->bv_len, &sid);
-+		if (!sid_parse(values[i]->bv_val, values[i]->bv_len, &sid)) {
-+			return;
-+		}
- 		printf("%s: %s\n", field, sid_string_static(&sid));
- 	}
- }
-diff --git a/source/libsmb/cliquota.c b/source/libsmb/cliquota.c
-index 2a47ae2..5721b67 100644
---- a/source/libsmb/cliquota.c
-+++ b/source/libsmb/cliquota.c
-@@ -117,7 +117,9 @@ static BOOL parse_user_quota_record(const char *rdata, unsigned int rdata_count,
- 	}
- #endif /* LARGE_SMB_OFF_T */
- 	
--	sid_parse(rdata+40,sid_len,&qt.sid);
-+	if (!sid_parse(rdata+40,sid_len,&qt.sid)) {
-+		return False;
-+	}
- 
- 	qt.qtype = SMB_USER_QUOTA_TYPE;
- 
-diff --git a/source/smbd/nttrans.c b/source/smbd/nttrans.c
-index 2b9d5da..60bab7e 100644
---- a/source/smbd/nttrans.c
-+++ b/source/smbd/nttrans.c
-@@ -2424,7 +2424,10 @@ static int call_nt_transact_ioctl(connection_struct *conn, char *inbuf, char *ou
- 		/* unknown 4 bytes: this is not the length of the sid :-(  */
- 		/*unknown = IVAL(pdata,0);*/
- 		
--		sid_parse(pdata+4,sid_len,&sid);
-+		if (!sid_parse(pdata+4,sid_len,&sid)) {
-+			return ERROR_NT(NT_STATUS_INVALID_PARAMETER);
-+		}
-+
- 		DEBUGADD(10,("for SID: %s\n",sid_string_static(&sid)));
- 
- 		if (!sid_to_uid(&sid, &uid)) {
-@@ -2662,7 +2665,9 @@ static int call_nt_transact_get_user_quota(connection_struct *conn, char *inbuf,
- 				break;
- 			}
- 
--			sid_parse(pdata+8,sid_len,&sid);
-+			if (!sid_parse(pdata+8,sid_len,&sid)) {
-+				return ERROR_NT(NT_STATUS_INVALID_PARAMETER);
-+			}
- 		
- 			if (vfs_get_ntquota(fsp, SMB_USER_QUOTA_TYPE, &sid, &qt)!=0) {
- 				ZERO_STRUCT(qt);
-@@ -2828,7 +2833,9 @@ static int call_nt_transact_set_user_quota(connection_struct *conn, char *inbuf,
- 	}
- #endif /* LARGE_SMB_OFF_T */
- 	
--	sid_parse(pdata+40,sid_len,&sid);
-+	if (!sid_parse(pdata+40,sid_len,&sid)) {
-+		return ERROR_NT(NT_STATUS_INVALID_PARAMETER);
-+	}
- 	DEBUGADD(8,("SID: %s\n",sid_string_static(&sid)));
- 
- 	/* 44 unknown bytes left... */

samba3/patches/030-samba-3.0.37-CVE-2012-1182.patch

@@ -1,59 +0,0 @@
-From e11637c2c89c2d38963311416c34a4767b19e175 Mon Sep 17 00:00:00 2001
-From: Stefan Metzmacher <metze@samba.org>
-Date: Sat, 17 Mar 2012 01:22:27 +0100
-Subject: [PATCH] s3:librpc/gen_ndr: fix array checks (bug #8815 / CVE-2012-1182)
-
-An Anonymous researcher working with HP's Zero Day Initiative program
-has found this and notified us.
-
-metze
----
- source/librpc/gen_ndr/ndr_wkssvc.c |   12 ++++++------
- 1 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/source/librpc/gen_ndr/ndr_wkssvc.c b/source/librpc/gen_ndr/ndr_wkssvc.c
-index 2af3587..07cf1a1 100644
---- a/source/librpc/gen_ndr/ndr_wkssvc.c
-+++ b/source/librpc/gen_ndr/ndr_wkssvc.c
-@@ -1385,10 +1385,10 @@ NTSTATUS ndr_pull_USER_INFO_0_CONTAINER(struct ndr_pull *ndr, int ndr_flags, str
- 			NDR_PULL_ALLOC_N(ndr, r->user0, ndr_get_array_size(ndr, &r->user0));
- 			_mem_save_user0_1 = NDR_PULL_GET_MEM_CTX(ndr);
- 			NDR_PULL_SET_MEM_CTX(ndr, r->user0, 0);
--			for (cntr_user0_1 = 0; cntr_user0_1 < r->entries_read; cntr_user0_1++) {
-+			for (cntr_user0_1 = 0; cntr_user0_1 < ndr_get_array_size(ndr, &r->user0); cntr_user0_1++) {
- 				NDR_CHECK(ndr_pull_USER_INFO_0(ndr, NDR_SCALARS, &r->user0[cntr_user0_1]));
- 			}
--			for (cntr_user0_1 = 0; cntr_user0_1 < r->entries_read; cntr_user0_1++) {
-+			for (cntr_user0_1 = 0; cntr_user0_1 < ndr_get_array_size(ndr, &r->user0); cntr_user0_1++) {
- 				NDR_CHECK(ndr_pull_USER_INFO_0(ndr, NDR_BUFFERS, &r->user0[cntr_user0_1]));
- 			}
- 			NDR_PULL_SET_MEM_CTX(ndr, _mem_save_user0_1, 0);
-@@ -1631,10 +1631,10 @@ NTSTATUS ndr_pull_USER_INFO_1_CONTAINER(struct ndr_pull *ndr, int ndr_flags, str
- 			NDR_PULL_ALLOC_N(ndr, r->user1, ndr_get_array_size(ndr, &r->user1));
- 			_mem_save_user1_1 = NDR_PULL_GET_MEM_CTX(ndr);
- 			NDR_PULL_SET_MEM_CTX(ndr, r->user1, 0);
--			for (cntr_user1_1 = 0; cntr_user1_1 < r->entries_read; cntr_user1_1++) {
-+			for (cntr_user1_1 = 0; cntr_user1_1 < ndr_get_array_size(ndr, &r->user1); cntr_user1_1++) {
- 				NDR_CHECK(ndr_pull_USER_INFO_1(ndr, NDR_SCALARS, &r->user1[cntr_user1_1]));
- 			}
--			for (cntr_user1_1 = 0; cntr_user1_1 < r->entries_read; cntr_user1_1++) {
-+			for (cntr_user1_1 = 0; cntr_user1_1 < ndr_get_array_size(ndr, &r->user1); cntr_user1_1++) {
- 				NDR_CHECK(ndr_pull_USER_INFO_1(ndr, NDR_BUFFERS, &r->user1[cntr_user1_1]));
- 			}
- 			NDR_PULL_SET_MEM_CTX(ndr, _mem_save_user1_1, 0);
-@@ -1953,10 +1953,10 @@ NTSTATUS ndr_pull_wkssvc_NetWkstaTransportCtr0(struct ndr_pull *ndr, int ndr_fla
- 			NDR_PULL_ALLOC_N(ndr, r->array, ndr_get_array_size(ndr, &r->array));
- 			_mem_save_array_1 = NDR_PULL_GET_MEM_CTX(ndr);
- 			NDR_PULL_SET_MEM_CTX(ndr, r->array, 0);
--			for (cntr_array_1 = 0; cntr_array_1 < r->count; cntr_array_1++) {
-+			for (cntr_array_1 = 0; cntr_array_1 < ndr_get_array_size(ndr, &r->array); cntr_array_1++) {
- 				NDR_CHECK(ndr_pull_wkssvc_NetWkstaTransportInfo0(ndr, NDR_SCALARS, &r->array[cntr_array_1]));
- 			}
--			for (cntr_array_1 = 0; cntr_array_1 < r->count; cntr_array_1++) {
-+			for (cntr_array_1 = 0; cntr_array_1 < ndr_get_array_size(ndr, &r->array); cntr_array_1++) {
- 				NDR_CHECK(ndr_pull_wkssvc_NetWkstaTransportInfo0(ndr, NDR_BUFFERS, &r->array[cntr_array_1]));
- 			}
- 			NDR_PULL_SET_MEM_CTX(ndr, _mem_save_array_1, 0);
--- 
-1.7.4.1
-

samba3/patches/520-fix_samba3_compilation_error

@@ -1,40 +0,0 @@
---- a/source/utils/owrt_smbpasswd.c	2017-10-03 15:57:24.190827000 +0100
-+++ a/source/utils/owrt_smbpasswd.c	2017-10-03 16:07:54.862857000 +0100
-@@ -108,7 +108,7 @@
- 		}
- 	}
- 
--	fprintf(fp, line);
-+	fprintf(fp, "%s", line);
- 
- out:
- 	if(fp)
-@@ -134,20 +134,20 @@
- 			p = strchr(t, ':');
- 			if(p && (p - t == strlen(user)) && (strncmp(t, user, strlen(user))) == 0)
- 			{
--				fpos_t r_pos, w_pos;
-+				long int r_pos, w_pos;
- 				char t2[256];
--				fgetpos(fp, &r_pos);
-+				r_pos = ftell(fp);
- 				w_pos = r_pos;
--				w_pos.__pos -= strlen(t);
-+				w_pos -= strlen(t);
- 				while(fgets(t2, 256, fp))
- 				{
--					fsetpos(fp, &w_pos);
-+					fseek(fp, w_pos, SEEK_SET);
- 					fputs(t2, fp);
--					r_pos.__pos += strlen(t2);
--					w_pos.__pos += strlen(t2);
--					fsetpos(fp, &r_pos);
-+					r_pos += strlen(t2);
-+					w_pos += strlen(t2);
-+					fseek(fp, r_pos, SEEK_SET);
- 				}
--				ftruncate(fileno(fp), w_pos.__pos);
-+				ftruncate(fileno(fp), w_pos);
- 				break;
- 			}
- 		}

tptest/files/etc/config/speedtest

@@ -1,5 +1,8 @@
-
 config testserver '1'
+	option server 'tptest.bredband.net'
+	option port '1640'
+
+config testserver '2'
 	option server 'referens.sth.ip-performance.se'
 	option port '1642'
 

tr064/.cproject

@@ -1,107 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
-	<storageModule moduleId="org.eclipse.cdt.core.settings">
-		<cconfiguration id="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916">
-			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916" moduleId="org.eclipse.cdt.core.settings" name="Debug">
-				<externalSettings/>
-				<extensions>
-					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
-					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-				</extensions>
-			</storageModule>
-			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916" name="Debug" parent="cdt.managedbuild.config.gnu.cross.exe.debug">
-					<folderInfo id="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916." name="/" resourcePath="">
-						<toolChain id="cdt.managedbuild.toolchain.gnu.cross.exe.debug.482080998" name="Cross GCC" superClass="cdt.managedbuild.toolchain.gnu.cross.exe.debug">
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="cdt.managedbuild.targetPlatform.gnu.cross.1864775892" isAbstract="false" osList="all" superClass="cdt.managedbuild.targetPlatform.gnu.cross"/>
-							<builder buildPath="${workspace_loc:/tr064}/Debug" id="cdt.managedbuild.builder.gnu.cross.84968765" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="cdt.managedbuild.builder.gnu.cross"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.c.compiler.912678595" name="Cross GCC Compiler" superClass="cdt.managedbuild.tool.gnu.cross.c.compiler">
-								<option defaultValue="gnu.c.optimization.level.none" id="gnu.c.compiler.option.optimization.level.732187738" name="Optimization Level" superClass="gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" valueType="enumerated"/>
-								<option id="gnu.c.compiler.option.debugging.level.406132207" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.max" valueType="enumerated"/>
-								<inputType id="cdt.managedbuild.tool.gnu.c.compiler.input.656190220" superClass="cdt.managedbuild.tool.gnu.c.compiler.input"/>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.cpp.compiler.894741631" name="Cross G++ Compiler" superClass="cdt.managedbuild.tool.gnu.cross.cpp.compiler">
-								<option id="gnu.cpp.compiler.option.optimization.level.1987025848" name="Optimization Level" superClass="gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.optimization.level.none" valueType="enumerated"/>
-								<option id="gnu.cpp.compiler.option.debugging.level.1506505331" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.max" valueType="enumerated"/>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.c.linker.1176314661" name="Cross GCC Linker" superClass="cdt.managedbuild.tool.gnu.cross.c.linker">
-								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1134635640" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
-									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
-									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
-								</inputType>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.cpp.linker.1076025733" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.archiver.862614592" name="Cross GCC Archiver" superClass="cdt.managedbuild.tool.gnu.cross.archiver"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.assembler.638528350" name="Cross GCC Assembler" superClass="cdt.managedbuild.tool.gnu.cross.assembler">
-								<inputType id="cdt.managedbuild.tool.gnu.assembler.input.390953300" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
-							</tool>
-						</toolChain>
-					</folderInfo>
-				</configuration>
-			</storageModule>
-			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
-		</cconfiguration>
-		<cconfiguration id="cdt.managedbuild.config.gnu.cross.exe.release.517635632">
-			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.cross.exe.release.517635632" moduleId="org.eclipse.cdt.core.settings" name="Release">
-				<externalSettings/>
-				<extensions>
-					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
-					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-				</extensions>
-			</storageModule>
-			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.cross.exe.release.517635632" name="Release" parent="cdt.managedbuild.config.gnu.cross.exe.release">
-					<folderInfo id="cdt.managedbuild.config.gnu.cross.exe.release.517635632." name="/" resourcePath="">
-						<toolChain id="cdt.managedbuild.toolchain.gnu.cross.exe.release.2086871607" name="Cross GCC" superClass="cdt.managedbuild.toolchain.gnu.cross.exe.release">
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="cdt.managedbuild.targetPlatform.gnu.cross.1691338213" isAbstract="false" osList="all" superClass="cdt.managedbuild.targetPlatform.gnu.cross"/>
-							<builder buildPath="${workspace_loc:/tr064}/Release" id="cdt.managedbuild.builder.gnu.cross.2045398730" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="cdt.managedbuild.builder.gnu.cross"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.c.compiler.804948441" name="Cross GCC Compiler" superClass="cdt.managedbuild.tool.gnu.cross.c.compiler">
-								<option defaultValue="gnu.c.optimization.level.most" id="gnu.c.compiler.option.optimization.level.422910401" name="Optimization Level" superClass="gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" valueType="enumerated"/>
-								<option id="gnu.c.compiler.option.debugging.level.1240870180" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.none" valueType="enumerated"/>
-								<inputType id="cdt.managedbuild.tool.gnu.c.compiler.input.118715116" superClass="cdt.managedbuild.tool.gnu.c.compiler.input"/>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.cpp.compiler.119838407" name="Cross G++ Compiler" superClass="cdt.managedbuild.tool.gnu.cross.cpp.compiler">
-								<option id="gnu.cpp.compiler.option.optimization.level.198417757" name="Optimization Level" superClass="gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.optimization.level.most" valueType="enumerated"/>
-								<option id="gnu.cpp.compiler.option.debugging.level.380023243" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.none" valueType="enumerated"/>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.c.linker.751400281" name="Cross GCC Linker" superClass="cdt.managedbuild.tool.gnu.cross.c.linker">
-								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.398459196" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
-									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
-									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
-								</inputType>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.cpp.linker.1354328537" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.archiver.1258554594" name="Cross GCC Archiver" superClass="cdt.managedbuild.tool.gnu.cross.archiver"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.assembler.2022763402" name="Cross GCC Assembler" superClass="cdt.managedbuild.tool.gnu.cross.assembler">
-								<inputType id="cdt.managedbuild.tool.gnu.assembler.input.1223740654" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
-							</tool>
-						</toolChain>
-					</folderInfo>
-				</configuration>
-			</storageModule>
-			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
-		</cconfiguration>
-	</storageModule>
-	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-		<project id="tr064.cdt.managedbuild.target.gnu.cross.exe.1457888368" name="Executable" projectType="cdt.managedbuild.target.gnu.cross.exe"/>
-	</storageModule>
-	<storageModule moduleId="scannerConfiguration">
-		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		<scannerConfigBuildInfo instanceId="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916;cdt.managedbuild.config.gnu.cross.exe.debug.1423203916.;cdt.managedbuild.tool.gnu.cross.c.compiler.912678595;cdt.managedbuild.tool.gnu.c.compiler.input.656190220">
-			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		</scannerConfigBuildInfo>
-		<scannerConfigBuildInfo instanceId="cdt.managedbuild.config.gnu.cross.exe.release.517635632;cdt.managedbuild.config.gnu.cross.exe.release.517635632.;cdt.managedbuild.tool.gnu.cross.c.compiler.804948441;cdt.managedbuild.tool.gnu.c.compiler.input.118715116">
-			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		</scannerConfigBuildInfo>
-	</storageModule>
-	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
-	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
-</cproject>

tr064/.project

@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<projectDescription>
-	<name>tr064</name>
-	<comment></comment>
-	<projects>
-		<project>openssl-1.0.2i</project>
-	</projects>
-	<buildSpec>
-		<buildCommand>
-			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
-			<triggers>clean,full,incremental,</triggers>
-			<arguments>
-			</arguments>
-		</buildCommand>
-		<buildCommand>
-			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
-			<triggers>full,incremental,</triggers>
-			<arguments>
-			</arguments>
-		</buildCommand>
-	</buildSpec>
-	<natures>
-		<nature>org.eclipse.cdt.core.cnature</nature>
-		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
-		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
-	</natures>
-</projectDescription>

tr064/.settings/language.settings.xml

@@ -1,25 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<project>
-	<configuration id="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916" name="Debug">
-		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
-			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
-			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
-			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider class="org.eclipse.cdt.internal.build.crossgcc.CrossGCCBuiltinSpecsDetector" console="false" env-hash="1404192411374960532" id="org.eclipse.cdt.build.crossgcc.CrossGCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT Cross GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
-				<language-scope id="org.eclipse.cdt.core.gcc"/>
-				<language-scope id="org.eclipse.cdt.core.g++"/>
-			</provider>
-		</extension>
-	</configuration>
-	<configuration id="cdt.managedbuild.config.gnu.cross.exe.release.517635632" name="Release">
-		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
-			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
-			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
-			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider class="org.eclipse.cdt.internal.build.crossgcc.CrossGCCBuiltinSpecsDetector" console="false" env-hash="1404192411374960532" id="org.eclipse.cdt.build.crossgcc.CrossGCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT Cross GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
-				<language-scope id="org.eclipse.cdt.core.gcc"/>
-				<language-scope id="org.eclipse.cdt.core.g++"/>
-			</provider>
-		</extension>
-	</configuration>
-</project>

tr064/Makefile

@@ -1,82 +0,0 @@
-# Copyright (C) 2017 PIVA Software <www.pivasoftware.com>
-# 	Author: OMAR Kallel <omar.kallel@pivasoftware.com>
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=tr064
-PKG_VERSION:=1.0
-PKG_SOURCE_URL:=git@public.inteno.se:tr064.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e53d492a09c433718a520987c419cb6a4d4ae8dc
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_CONFIG_DEPENDS:= \
-	CONFIG_TR064_DEBUG \
-	CONFIG_TR064_DEVEL
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/tr064
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=tr064
-  DEPENDS:=+libubus +libuci +libubox +libmicroxml +libjson-c +libpthread +libdatamodel +libopenssl +libubus +libubox
-endef
-
-define Package/tr064/description
-	TR-064 protocol
-endef
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE
-
-TARGET_LDFLAGS += \
-	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
-
-CONFIGURE_ARGS += \
-	--with-uci-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-
-ifeq ($(CONFIG_TR064_DEBUG),y)
-CONFIGURE_ARGS += \
-	--enable-debug
-endif
-
-ifeq ($(CONFIG_TR064_DEVEL),y)
-CONFIGURE_ARGS += \
-	--enable-devel
-endif
-
-CONFIGURE_ARGS += \
-	--enable-jsonc=1
-
-define Package/tr064/conffiles
-/etc/config/tr064
-endef
-
-define Package/tr064/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/upnp-md
-	$(INSTALL_DIR) $(1)/etc/upnp-md/web
-	$(INSTALL_DIR) $(1)/etc/upnp-md/x509
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/upnp-md-pupnp/upnp-md $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/web/*.xml $(1)/etc/upnp-md/web
-	$(CP) $(PKG_BUILD_DIR)/tools/parse_ftp_server_log.sh $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/tools/kill_child.sh $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/x509/*.pem $(1)/etc/upnp-md/x509
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/conf/upnp-md.conf $(1)/etc/upnp-md
-	$(CP) $(PKG_BUILD_DIR)/conf/DMconf.xml $(1)/etc/upnp-md
-	$(CP) $(PKG_BUILD_DIR)/conf/CPID.csv $(1)/etc/upnp-md
-	$(CP) $(PKG_BUILD_DIR)/conf/tr064 $(1)/etc/config
-	$(CP) $(PKG_BUILD_DIR)/conf/tr064d $(1)/etc/init.d
-	chmod 0744 $(1)/etc/init.d/tr064d
-endef
-
-$(eval $(call BuildPackage,tr064))

uboot/Makefile

@@ -9,10 +9,10 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=u-boot
 PKG_VERSION:=2016.08
-PKG_RELEASE:=4
+PKG_RELEASE:=2
 PKG_SOURCE_URL:=http://public.inteno.se:/uboot
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f502d1b589f14142bf7d7719e8434014f180d03f
+PKG_SOURCE_VERSION:=fccb9d5ee720a9f60cba917ded83e5cebe221eef
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

voice-client/Makefile

@@ -16,7 +16,7 @@ define Package/voice-client
   SECTION:=net
   CATEGORY:=Network
   TITLE:=voice-client
-  DEPENDS:=asterisk13||asterisk18-mod
+  DEPENDS:=+asterisk13
 endef
 
 define Package/voice-client/description

voice-client/files/etc/init.d/voice_client

@@ -68,7 +68,6 @@ TMPL_ASTERISK=$TEMPLATEDIR/asterisk.conf.TEMPLATE
 TMPL_CDR=$TEMPLATEDIR/cdr.conf.TEMPLATE
 TMPL_CDR_SYSLOG=$TEMPLATEDIR/cdr_syslog.conf.TEMPLATE
 TMPL_INDICATIONS=$TEMPLATEDIR/indications.conf.TEMPLATE
-TMPL_CEL=$TEMPLATEDIR/cel.conf.TEMPLATE
 TMPL_LOGGER=$TEMPLATEDIR/logger.conf.TEMPLATE
 TMPL_MANAGER=$TEMPLATEDIR/manager.conf.TEMPLATE
 TMPL_MODULES=$TEMPLATEDIR/modules.conf.TEMPLATE
@@ -81,7 +80,7 @@ TMPL_BRCM_LINE=$TEMPLATEDIR/brcm_line.TEMPLATE
 
 TMPL_MEETME=$TEMPLATEDIR/meetme.conf.TEMPLATE
 
-SPECRATECFG=$ASTERISKDIR/special_rate_nr.cfg
+SPECRATEDIR=$ASTERISKDIR/special_rate_nr.cfg
 
 run_hook()
 {
@@ -98,13 +97,13 @@ escape_sed_substitution()
 # Gets rid of any config files from $ASTERISKDIR not found in $WORKDIR.
 clean_up_asterisk_config_dir()
 {
-	for f in $ASTERISKDIR/* ; do
-		basef="`basename $f`"
-		if [ ! -e "$WORKDIR/$basef" ] ; then
-			rm -rf "$f"
+        for f in $ASTERISKDIR/* ; do
+                basef="`basename $f`"
+                if [ ! -e "$WORKDIR/$basef" ] ; then
+                        rm -rf "$f"
 			echo "$f" >> /tmp/voice.log
-		fi
-	done
+                fi
+        done
 }
 
 # Compares md5sums of the config files in $WORKDIR to those
@@ -114,7 +113,7 @@ compare_configs_and_copy_changed()
 {
 	# First, compute md5sums of the config files in $WORKDIR.
 	cd $WORKDIR/
-	md5sum * > $MD5SUMSFILE 2>/dev/null
+	md5sum * > $MD5SUMSFILE
 
 	# Now, check the files in $ASTERISKDIR against the md5sums.
 	cd $ASTERISKDIR/
@@ -142,15 +141,15 @@ assemble_and_copy_config()
 	# start if a config item is missing and an included config file isn't created.
 
 	# Copy the template files which we don't edit.
-	[ -f $TMPL_ASTERISK ]		&& cp $TMPL_ASTERISK		$WORKDIR/asterisk.conf
-	[ -f $TMPL_CDR ]		&& cp $TMPL_CDR			$WORKDIR/cdr.conf
-	[ -f $TMPL_CEL ]		&& cp $TMPL_CEL			$WORKDIR/cel.conf
-	[ -f $TMPL_INDICATIONS ]	&& cp $TMPL_INDICATIONS		$WORKDIR/indications.conf
-	[ -f $TMPL_MANAGER ]		&& cp $TMPL_MANAGER		$WORKDIR/manager.conf
-	[ -f $TMPL_MODULES ]		&& cp $TMPL_MODULES		$WORKDIR/modules.conf
-	[ -f $TMPL_EXTENSIONS_MACRO ]	&& cp $TMPL_EXTENSIONS_MACRO	$WORKDIR/extensions_macro.conf
-	[ -f $TMPL_MUSICONHOLD ]	&& cp $TMPL_MUSICONHOLD		$WORKDIR/musiconhold.conf
-	[ -f $SPECRATECFG ]		&& cp $SPECRATECFG		$WORKDIR/special_rate_nr.cfg
+	cp $TMPL_ASTERISK		$WORKDIR/asterisk.conf
+	cp $TMPL_CDR			$WORKDIR/cdr.conf
+	cp $TMPL_CEL			$WORKDIR/cel.conf
+	cp $TMPL_INDICATIONS		$WORKDIR/indications.conf
+	cp $TMPL_MANAGER		$WORKDIR/manager.conf
+	cp $TMPL_MODULES		$WORKDIR/modules.conf
+	cp $TMPL_EXTENSIONS_MACRO	$WORKDIR/extensions_macro.conf
+	cp $TMPL_MUSICONHOLD		$WORKDIR/musiconhold.conf
+	cp $SPECRATEDIR                 $WORKDIR/special_rate_nr.cfg
 	
 	test -e $TMPL_MEETME && cp $TMPL_MEETME $WORKDIR/meetme.conf
 	
@@ -179,7 +178,7 @@ assemble_and_copy_config()
 	mv $WORKDIR/features.tmp		$WORKDIR/features.conf
 	mv $WORKDIR/voicemail.tmp		$WORKDIR/voicemail.conf
 	mv $WORKDIR/meetme.tmp			$WORKDIR/meetme.conf
-	mv $WORKDIR/logger.tmp			$WORKDIR/logger.conf
+        mv $WORKDIR/logger.tmp			$WORKDIR/logger.conf
 	mv $WORKDIR/queues.tmp			$WORKDIR/queues.conf
 	mv $WORKDIR/dnsmgr.tmp			$WORKDIR/dnsmgr.conf
 
@@ -468,13 +467,13 @@ configure_sip()
 	if [ -z "$registertimeoutbackoff" ] ; then
 		sed -i "s/registertimeoutbackoff=|REGISTERTIMEOUTBACKOFF|/;registertimeoutbackoff=/g"    $WORKDIR/sip.tmp
 	else
-		sed -i "s/|REGISTERTIMEOUTBACKOFF|/$registertimeoutbackoff/g"			     $WORKDIR/sip.tmp
+		sed -i "s/|REGISTERTIMEOUTBACKOFF|/$registertimeoutbackoff/g"                             $WORKDIR/sip.tmp
 	fi
 
 	if [ -z "$registerattemptsbackoff" ] ; then
 		sed -i "s/registerattemptsbackoff=|REGISTERATTEMPTSBACKOFF|/;registerattemptsbackoff=/g"  $WORKDIR/sip.tmp
 	else
-		sed -i "s/|REGISTERATTEMPTSBACKOFF|/$registerattemptsbackoff/g"			   $WORKDIR/sip.tmp
+		sed -i "s/|REGISTERATTEMPTSBACKOFF|/$registerattemptsbackoff/g"                           $WORKDIR/sip.tmp
 	fi
 
 	if [ -z "$register403timeout" ] ; then
@@ -543,7 +542,7 @@ configure_sip()
 	for section in ${CONFIG_SECTIONS}; do
 		local transport
 		config_get cfgtype "$section" TYPE
-		[ -n "$type" -a "x$cfgtype" != "x$type" ] && continue
+	        [ -n "$type" -a "x$cfgtype" != "x$type" ] && continue
 		config_get transport $section transport
 		if [ "$transport" == "tls" ] ; then
 			tlsenable="yes"
@@ -805,7 +804,7 @@ configure_sip_provider()
 	fi
 	sed -i "s/|AUTOFRAMING|/$autoframing/"			$WORKDIR/sip_provider.tmp
 
-	# Set registered extension so that incoming calls match the correct peer
+	# Set registered extension so that incoming calls match the correct peer                     
 	sed -i "s/|CONTACT_USER|/$user/g"      $WORKDIR/sip_provider.tmp
 
 	# Add SIP Provider configuration to the temp file containing all SIP Provider configs.
@@ -1036,7 +1035,7 @@ configure_queue()
 	echo "[macro-$1]" >>					$WORKDIR/macros.tmp
 	echo "exten => s,1,Answer()" >>				$WORKDIR/macros.tmp
 
-	# Workaround to fix no ringback issue for incoming SIP calls
+        # Workaround to fix no ringback issue for incoming SIP calls
 	echo "exten => s,n,Playback(silence/1)" >>		$WORKDIR/macros.tmp
 
 	echo "exten => s,n,Queue($1,R)" >>			$WORKDIR/macros.tmp
@@ -1128,13 +1127,13 @@ configure_cdr()
 
 	echo "cdr_syslog: $cdr_syslog"
 
-	if [ -z "$cdr_syslog" ] ; then
+        if [ -z "$cdr_syslog" ] ; then
 	    cdr_syslog='0'
 	fi
 
 	# Enable/disable CDR logging in syslog
 	if [ "$cdr_syslog" == "1" ] ; then
-	    cp $TMPL_CDR_SYSLOG			$WORKDIR/cdr_syslog.conf
+            cp $TMPL_CDR_SYSLOG		        $WORKDIR/cdr_syslog.conf
 	fi
 }
 
@@ -1189,28 +1188,27 @@ configure_call_filters()
 	echo "exten => s,n(not-foreign),Set(FOREIGN=0)" >>	$WORKDIR/macros.tmp
 	echo "" >>						$WORKDIR/macros.tmp
 
-	# Get special rate numbers from /etc/asterisk/special_rate_nr.cfg
-	if [ -f $SPECRATECFG ]; then
-		while read line
-		do
-		    i=0
-		    for v in $(echo $line | tr ";" "\n")
-			do
-				if [ "$i" -eq "0" -a "$v" != "$country" ] ; then
-					continue 2
-				fi
-				if [ "$i" -eq "1" ] ; then
-					srn=$v
-				fi
-				i=$((i+1))
-			done
 
-			if [ -n "$srn"  ] ; then
-				# Special rate numbers found
-				break
+	# Get special rate numbers from /etc/asterisk/special_rate_nr.cfg
+	while read line
+	do
+	    i=0
+	    for v in $(echo $line | tr ";" "\n")
+		do
+			if [ "$i" -eq "0" -a "$v" != "$country" ] ; then
+				continue 2
 			fi
-		done < $SPECRATECFG
-	fi
+			if [ "$i" -eq "1" ] ; then
+				srn=$v
+			fi
+			i=$((i+1))
+		done
+
+		if [ -n "$srn"  ] ; then
+			# Special rate numbers found
+			break
+		fi
+	done < "/etc/asterisk/special_rate_nr.cfg"
 
 	echo "Found special rate numbers: $srn"
 
@@ -1329,8 +1327,8 @@ get_call_filter()
 	macro="NoOp()"
 	
 	if ! [ "x$direction" != "xincoming" -o "x$direction" != "xoutgoing" ] ; then
-		echo $macro
-	fi
+                echo $macro
+        fi
 
 	local call_filter enabled
 	config_get call_filter $provider call_filter "call_filter0"
@@ -1355,20 +1353,20 @@ configure_opening_hours_profile()
 	local section cfgtype
 	[ -z "$CONFIG_SECTIONS" ] && return 0
 	for section in ${CONFIG_SECTIONS}; do
-		config_get cfgtype "$section" TYPE
-		[ -n "timespan" -a "x$cfgtype" != "xtimespan" ] && continue
-		local owner
+	        config_get cfgtype "$section" TYPE
+	        [ -n "timespan" -a "x$cfgtype" != "xtimespan" ] && continue
+	        local owner
 	
-		config_get owner $section owner
-		if [ "$owner" == "$1" ] ; then
-			local tr dow dom months
-			config_get tr $section time_range
-			config_get dow $section days_of_week
-			config_get dom $section days_of_month
-			config_get months $section months
+	        config_get owner $section owner
+	        if [ "$owner" == "$1" ] ; then
+	                local tr dow dom months
+	                config_get tr $section time_range
+	                config_get dow $section days_of_week
+	                config_get dom $section days_of_month
+	                config_get months $section months
 	
-			echo "exten => s,n,GotoIfTime($tr,$dow,$dom,$months,?$label)" >> $WORKDIR/macros.tmp
-		fi
+	                echo "exten => s,n,GotoIfTime($tr,$dow,$dom,$months,?$label)" >> $WORKDIR/macros.tmp
+	        fi
 	done
 	if [ "$invert" == "0" ] ; then
 		echo "exten => s,n,Goto(closed)" >>		$WORKDIR/macros.tmp
@@ -1643,7 +1641,7 @@ configure_extensions_provider()
 	local call_ivr call_queue extension
 	echo "exten => $user,n,Set(__TRANSFER_CONTEXT=\${CHANNEL(peername)}-transfer)" >>	$tmp
 
-	# replace prefix '+' with '00'
+        # replace prefix '+' with '00'
 	echo "exten => $user,n,GotoIf($[\"\${CALLERID(NUM):0:1}\" = \"+\"]?rewrite:norewrite)" >>	$tmp
 	echo "exten => $user,n(rewrite),Set(CALLERID(num)=\"00\${CALLERID(num):1}\"))" >>		$tmp
 	echo "exten => $user,n(norewrite),NoOp()">>							$tmp
@@ -1706,7 +1704,7 @@ configure_brcm_line_extension()
 		echo "Configuring local extension $extension"
 
 		config_get cbbs_enabled "features" cbbs_enabled
-		# load cbbs settings if enabled
+		# load cbbs settings if enabled                                                                                                                                             
 		cbbs_key=""
 		cbbs_maxretry="0"
 		cbbs_retrytime="0"
@@ -1723,7 +1721,7 @@ configure_brcm_line_extension()
 		sed -i "s/|LINE|/$line/g"			$WORKDIR/extensions_local_line.tmp
 		sed -i "s/|TIMEOUT|/$(get_voicemail_timeout)/g"	$WORKDIR/extensions_local_line.tmp
 
-		#cbbs settings
+		#cbbs settings                                                                                                                                                              
 		sed -i "s/|CBBS_KEY|/$(escape_sed_substitution $cbbs_key)/"	$WORKDIR/extensions_local_line.tmp
 		sed -i "s/|MAX_RETRIES|/$cbbs_maxretry/"      			$WORKDIR/extensions_local_line.tmp
 		sed -i "s/|RETRYTIME|/$cbbs_retrytime/"				$WORKDIR/extensions_local_line.tmp
@@ -2000,8 +1998,8 @@ configure_conference()
 	echo "exten => $extension,n(enterno),Read(confno,,5)"			>> $WORKDIR/extensions_local.tmp
 	
 	for section in ${CONFIG_SECTIONS}; do
-		config_get cfgtype "$section" TYPE
-		[ "x$cfgtype" != "xconference_room" ] && continue
+                config_get cfgtype "$section" TYPE
+                [ "x$cfgtype" != "xconference_room" ] && continue
 
 		local name id enabled
 		config_get name $section name
@@ -2013,7 +2011,7 @@ configure_conference()
 		echo "Enabling conference room $id"
 		echo "exten => $extension,n,GotoIf($[\"\${confno}\"=\"$id\"]?enterconf)"	>> $WORKDIR/extensions_local.tmp
 		echo "conf => $id"								>> $WORKDIR/meetme.tmp
-	done
+        done
 
 	echo "exten => $extension,n,Playback(conf-invalid)"			>> $WORKDIR/extensions_local.tmp
 	echo "exten => $extension,n,Goto(enterno)"				>> $WORKDIR/extensions_local.tmp
@@ -2283,13 +2281,11 @@ reload_service() {
 	# if there is a registered account
 	ubus call led.voice1 set '{"state":"off"}'
 
-	asterisk -rx "config reload $ASTERISKDIR/sip.conf"
-	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
 	asterisk -rx "brcm reload"
 }
 
 service_triggers() {
-	procd_add_reload_trigger voice_client
+        procd_add_reload_trigger voice_client
 }