icwmp-3.0-2017-06-30

2025-12-28 06:59:28 +08:00 · 2017-06-30 12:00:21 +02:00
55 changed files with 217 additions and 1140 deletions
--- a/brcmslic/Makefile
+++ b/brcmslic/Makefile
@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=0.1
-PKG_SOURCE_URL:=git@private.inteno.se:brcmslic
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=837ec19e37650e424e77c921672a0806e198ba7b
-PKG_NAME:=brcmslic
-
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/brcmslic
-  CATEGORY:=Utilities
-  TITLE:=Brcmslic
-  URL:=
-  DEPENDS:=
-endef
-
-define Package/brcmslic/description
-	Brcmslic
-endef
-
-
-define Package/brcmslic/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/brcmslic $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endpt $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,brcmslic))
--- a/brcmslic/files/dect.config
+++ b/brcmslic/files/dect.config
@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-
--- a/catv/files/etc/config/catv
+++ b/catv/files/etc/config/catv
@@ -1,4 +1,4 @@

 config service 'catv'
-        option enable '0'
+        option enable 'no'
        option filter '3'
--- a/fping/Makefile
+++ b/fping/Makefile
@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fping
-PKG_VERSION:=4.0
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://fping.org/dist/
-PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
-
-PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
-PKG_LICENSE:=BSD-4-Clause
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fping
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
-  URL:=http://fping.org/
-endef
-
-
-define Package/fping/description
-	fping is a ping like program which uses the Internet Control Message Protocol
-	(ICMP) echo request to determine if a target host is responding.  fping
-	differs from ping in that you can specify any number of targets on the command
-	line, or specify a file containing the lists of targets to ping.  Instead of
-	sending to one target until it times out or replies, fping will send out a
-	ping packet and move on to the next target in a round-robin fashion.
-endef
-
-CONFIGURE_ARGS+= \
-	--enable-ipv4 \
-	--enable-ipv6
-
-TARGET_CFLAGS += -std=gnu99
-
-define Package/fping/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,fping))
--- a/ice-client/Makefile
+++ b/ice-client/Makefile
@@ -19,14 +19,14 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk

 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.0.1
-PKG_RELEASE:=RC1
+BASE_PKG_VERSION:=4.4.0
+PKG_RELEASE:=RC8
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION

 ###########################--RELEASE--################################

-PKG_SOURCE_VERSION:=a2635dd11c477d70728ab6cbe5c2dee3965dbe14
+PKG_SOURCE_VERSION:=4b9a5eb71dbf14f5fa72c7c10fa53035489f6f88
 ifeq ($(CONFIG_ICE_OPEN),y)
 TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
@@ -154,7 +154,6 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/scripts/etc/config/ice $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/iopsys
 	$(CP) $(PKG_BUILD_DIR)/scripts/server.ini $(1)/etc/iopsys	
-	$(CP) $(PKG_BUILD_DIR)/scripts/defaults.ini $(1)/etc/iopsys	
 	$(CP) $(PKG_BUILD_DIR)/scripts/modify.ini $(1)/etc/iopsys
 	$(INSTALL_DIR) $(1)/etc/iopsys/certificates
 	$(CP) $(PKG_BUILD_DIR)/scripts/cert_server_ca.pem $(1)/etc/iopsys/certificates
--- a/ice-client/files/ice-client.uci_default
+++ b/ice-client/files/ice-client.uci_default
@@ -1,15 +1,13 @@
 #!/bin/sh

 grep -rq "^ice:" /etc/passwd || {
-	adduser -D -H -s /bin/false ice
+	local password="$(db get hw.board.wpaKey)"
+	if [ -n "$password" ]; then
+		adduser -D -H -s /bin/false ice
+		(echo $password; sleep 1; echo $password) | passwd ice >/dev/null 2>&1
+	fi
 }

-uci -q delete passwords.ice
-uci -q set passwords.ice=usertype
-uci -q set passwords.ice.password="\$WPAKEY"
-uci -q add_list passwords.ice._access_r=root
-uci -q commit passwords
-
 uci show rpcd | grep username=.*ice.* >/dev/null || {
 cat >> /etc/config/rpcd << EOF

@@ -49,7 +47,6 @@ config login
 	list write 'juci-network-netifd'
 	list write 'juci-owsd'
 	list write 'juci-printer'
-	list write 'juci-realtime-graphs'
 	list write 'juci-samba'
 	list write 'juci-sfp'
 	list write 'juci-snmpd'
@@ -59,7 +56,6 @@ config login
 	list write 'juci-usb'
 	list write 'core'
 	list write 'unauthenticated'
-
 EOF
 }

--- a/icwmp/Makefile
+++ b/icwmp/Makefile
@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2017-11-24
+PKG_VERSION:=3.0-2017-06-30
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d74b88913f676ebf9a210c4674555d080e57ff52
+PKG_SOURCE_VERSION:=0999d69acc7e02b8f6ffcc1c4ca4c759de0f7915
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -66,10 +66,6 @@ define Build/Prepare
 endef
 endif

-ifeq ($(CONFIG_TARGET_IBOARDID),"EX400")
-TARGET_CFLAGS += -DEX400
-endif
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ

--- a/ifbt/Makefile
+++ b/ifbt/Makefile
@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ifbt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=da97d6668d3c0e3f2be226c66b406e90179ada81
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@private.inteno.se:ifbt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ifbt
-	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-	TITLE:=Fast BSS Transition
-endef
-
-define Package/ifbt/description
-	ifbt is Iopsys application for fast BSS transition
-endef
-
-define Package/ifbt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ifbt))
--- a/inbd/Makefile
+++ b/inbd/Makefile
@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1

-PKG_SOURCE_VERSION:=92f918d26c0ffc22d1704f5ea6cbb0bd7fdbdab9
+PKG_SOURCE_VERSION:=2d474e9ff37b9cfcffd4b9ac8eba8db03eb38a21
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se/inbd

--- a/inteno-netmodes/Makefile
+++ b/inteno-netmodes/Makefile
@@ -12,7 +12,6 @@ include $(INCLUDE_DIR)/package.mk

 define Package/inteno-netmodes
  CATEGORY:=Base system
-  DEPENDS:=+fping
  TITLE:=Predefined Network Modes
 endef

--- a/inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-handler
+++ b/inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-handler
@@ -27,7 +27,6 @@ toggle_firewall() {
 set_disabled() {
 	config_load firewall
 	config_foreach toggle_firewall zone $1
-	/etc/init.d/firewall reload
 }

 is_inteno_macaddr()
--- a/inteno-netmodes/files/etc/hotplug.d/net/80-repeater
+++ b/inteno-netmodes/files/etc/hotplug.d/net/80-repeater
@@ -67,9 +67,7 @@ case "$ACTION" in
 		uci set network.wan.ifname="$(echo $WANDEV $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$wetif //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
 		uci commit network
 		ubus call network reload
-		[ -f /usr/sbin/wlctl ] && wlctl -i $wetif bss down 2>/dev/null
 		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-		ubus call router.network reload
 		ubus call leds set  '{"state" : "normal"}'
 	;;
 	remove|unregister)
@@ -89,13 +87,11 @@ case "$ACTION" in
 		uci set network.wan.ifname="$(echo $wetif $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$WANDEV //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
 		uci commit network
 		ubus call network reload
-		[ -f /usr/sbin/wlctl ] && wlctl -i $wetif bss up 2>/dev/null
 		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || {
 			killall -9 wifi
 			wifi reload nodat
 			killall -USR1 udhcpc
 		}
-		ubus call router.network reload
 		ubus call leds set  '{"state" : "normal"}'
 	;;
 esac
--- a/inteno-netmodes/files/etc/init.d/netmode
+++ b/inteno-netmodes/files/etc/init.d/netmode
@@ -3,9 +3,6 @@
 START=10
 USE_PROCD=1

-TMPDIR=/var/netmodes
-OLD_MODE_FILE=/var/netmodes/old_mode
-
 . /usr/share/libubox/jshn.sh
 . /lib/network/config.sh

@@ -44,29 +41,13 @@ get_device() {

 populate_netmodes() {
 	[ -f /etc/config/netmode -a -d $modedir ] || return
-	local curmode
-
-	config_load netmode
-
-	config_get curmode setup curmode
-
-	mkdir -p $TMPDIR
-
-	if [ "$curmode" == "routed" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="routed_mtk"
-		else
-			curmode="routed_brcm"
-		fi
-	fi
-
-	echo $curmode > $OLD_MODE_FILE

 	delete_netmode() {
 		uci delete netmode.$1
 	}

+	config_load netmode
+
 	config_foreach delete_netmode netmode
 	uci commit netmode

@@ -181,20 +162,17 @@ populate_netmodes() {

 switch_netmode() {
 	[ -f /etc/config/netmode -a -d $modedir ] || return
-
-	local netreload="$1"
-	local curmode conf repeaterready old_mode
+	local curmode conf repeaterready

 	config_load netmode

-	config_get curmode setup curmode
-
 	config_get repeaterready setup repeaterready "0"
 	if [ "$repeaterready" == "1" ] ; then
 		uci -q set netmode.setup.repeaterready="0"
 		uci commit netmode
 	fi

+	config_get curmode setup curmode
 	if [ "$curmode" == "repeater" ]; then
 		local hw="$(db -q get hw.board.hardware)"
 		if [ "$hw" == "EX400" ]; then
@@ -215,17 +193,6 @@ switch_netmode() {
 		uci set netmode.setup.curmode="$curmode"
 		uci commit netmode
 	fi
-
-	old_mode=`cat $OLD_MODE_FILE 2>/dev/null`
-
-        # if curmode has not changed do not copy configs
-        if [ "$curmode" == "$old_mode" ]; then
-                /etc/init.d/enviroment reload
-                return
-        fi
-
-        echo $curmode >$OLD_MODE_FILE
-
 	[ -d "/etc/netmodes/$curmode" ] || return
 	cp /etc/netmodes/$curmode/* /etc/config/
 	rm -f /etc/config/DETAILS
@@ -238,14 +205,6 @@ switch_netmode() {
 			routed*)
 				ubus call uci commit '{"config":"network"}'
 			;;
-			repeater*)
-				if [ -f /etc/init.d/omcproxy ]; then
-					/etc/init.d/omcproxy stop
-				fi
-				if [ "$netreload" != "0" ]; then
-					ubus call uci commit '{"config":"network"}'
-				fi
-			;;
 		esac
 	else
 		reboot &
@@ -279,45 +238,23 @@ start_client_listener() {
 	esac
 }

-start_netmode_discover() {
-	local curmode repeaterready
-
-	killall -9 netmode-discover >/dev/null 2>&1
-
-	config_load netmode
-	config_get repeaterready setup repeaterready 0
-
-	[ $repeaterready -eq 1 ] && return
-
-	config_get curmode setup curmode
-
-	case "$curmode" in
-		repeater*)
-			/sbin/netmode-discover &
-		;;
-	esac
-}
-
 start_service() {
 	populate_netmodes
 	start_client_listener
-	start_netmode_discover
 }

 reload_service() {
-        switch_netmode "$1"
+        switch_netmode

 	# set default JUCI page to overview
 	uci -q set juci.juci.homepage="overview"
 	uci commit juci

 	start_client_listener
-	start_netmode_discover
 }

 stop_service() {
 	killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-	killall -9 netmode-discover >/dev/null 2>&1
 }

 service_triggers()
--- a/inteno-netmodes/files/etc/netmodes/bridged/wireless
+++ b/inteno-netmodes/files/etc/netmodes/bridged/wireless
@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'

-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless
@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'

-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/wireless
@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'

-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/wireless
@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'

-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/omcproxy
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/omcproxy
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/wireless
@@ -4,18 +4,11 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'

-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device  ra0
 	option band b
 	option channel  auto
 	option bandwidth '20'
-	option hwmode   auto
+	option hwmode   11n
 	option htmode   HT20
 	option country 'DE'

--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/omcproxy
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/omcproxy
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless
@@ -4,18 +4,11 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'

-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device  ra0
 	option band b
 	option channel  auto
 	option bandwidth '20'
-	option hwmode   auto
+	option hwmode   11n
 	option htmode   HT20
 	option country 'DE'

--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/wireless
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/wireless
@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'

-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/omcproxy
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/omcproxy
@@ -1,10 +0,0 @@
-config proxy
-	option scope global
-	option uplink wan
-	list downlink lan
-
-config proxy
-	option scope global
-	option uplink wan6
-	list downlink lan
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/wireless
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/wireless
@@ -4,18 +4,11 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'

-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device  ra0
 	option band b
 	option channel  auto
 	option bandwidth '20'
-	option hwmode   auto
+	option hwmode   11n
 	option htmode   HT20
 	option country 'DE'

--- a/inteno-netmodes/files/sbin/netmode-conf
+++ b/inteno-netmodes/files/sbin/netmode-conf
@@ -63,7 +63,7 @@ get_iface_num() {
 			break
 		fi
 		mode="$(uci -q get wireless.@wifi-iface[$i].mode)"
-		if [ "$mode" == "wet" -o "$mode" == "sta" ]; then
+		if [ "$mode" != "ap" ]; then
 			i=$((i+1))
 			continue
 		fi
@@ -150,12 +150,12 @@ local dummy band ssid key encryption device iface_num
 while json_get_var dummy $i; do
 	json_select $i
 	json_get_var band band
-	[ "$band" == "" -o "$apcliband" == "$band" ] && break
+	[ "$apcliband" == "$band" ] && break
 	json_select ..
 	i=$((i+1))
 done

-[ "$apcliband" == "$band" -o "$band" == "" ] || {
+[ "$apcliband" == "$band" ] || {
 	[ "$from_gui" == "true" ] && restore "back"
 	exit
 }
@@ -184,57 +184,30 @@ i=1
 while json_get_var dummy $i; do
 	json_select $i
 	json_get_var band band
+	get_device "$band" device
+	case $band in
+		a)
+			get_iface_num "$device" "$a_num" iface_num
+			a_num=$((a_num+1))
+			;;
+		b)
+			get_iface_num "$device" "$b_num" iface_num
+			b_num=$((b_num+1))
+			;;
+	esac
+	[ -z $iface_num ] && {
+		[ "$from_gui" == "true" ] && restore "back"
+		exit
+	}
 	json_get_var ssid ssid
 	json_get_var encryption encryption
 	json_get_var key key
-	if [ "$band" == "" ]; then
-		get_device "a" device
-		get_iface_num "$device" "$a_num" iface_num
-		a_num=$((a_num+1))
-		[ -z $iface_num ] && {
-			[ "$from_gui" == "true" ] && restore "back"
-			exit
-		}
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-		get_device "b" device
-                get_iface_num "$device" "$b_num" iface_num
-                b_num=$((b_num+1))
-                [ -z $iface_num ] && {
-                        [ "$from_gui" == "true" ] && restore "back"
-                        exit
-                }
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-	else
-		get_device "$band" device
-		case $band in
-			a)
-				get_iface_num "$device" "$a_num" iface_num
-				a_num=$((a_num+1))
-				;;
-			b)
-				get_iface_num "$device" "$b_num" iface_num
-				b_num=$((b_num+1))
-				;;
-		esac
-		[ -z $iface_num ] && {
-			[ "$from_gui" == "true" ] && restore "back"
-			exit
-		}
-		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
-	fi
-	i=$((i+1))
+	set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
 	json_select ..
+	i=$((i+1))
 done

-i=$((b_num + a_num + 1))
-
-if [ $repeater_iface_num -gt $i ]; then
-	i=$((i-1))
-fi
-
 while uci -q get wireless.@wifi-iface[$i] >/dev/null; do
-	# if repeater_iface_num is greater than the number of
-	# configured downlink we need to make sure its not deleted
 	local mode="$(uci -q get wireless.@wifi-iface[$i].mode)"
 	if [ "$mode" == "wet" -o "$mode" == "sta" ]; then
 		i=$((i+1))
@@ -242,8 +215,7 @@ while uci -q get wireless.@wifi-iface[$i] >/dev/null; do
 	fi
 	state="reload"
 	uci -q delete wireless.@wifi-iface[$i] >/dev/null
-	# do not increment i. The next interface will now
-	# have the same index as the deleted interface
+	i=$((i+1))
 done

 uci commit wireless
--- a/inteno-netmodes/files/sbin/netmode-discover
+++ b/inteno-netmodes/files/sbin/netmode-discover
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-local unlisted mac ipaddr netmask mask
-
-mask_to_cidr() {
-    nbits=0
-    IFS=.
-    for dec in $1 ; do
-        case $dec in
-            255) let nbits+=8;;
-            254) let nbits+=7;;
-            252) let nbits+=6;;
-            248) let nbits+=5;;
-            240) let nbits+=4;;
-            224) let nbits+=3;;
-            192) let nbits+=2;;
-            128) let nbits+=1;;
-            0);;
-            *) echo "Error: $dec is not recognised"; exit 1
-        esac
-    done
-    echo "$nbits"
-}
-
-while true; do
-	unlisted=0
-
-	ps | grep -q wifi | grep -q reload || {
-		for mac in $(brctl showmacs br-wan 2>/dev/null | tail -n +2 | grep no | awk '{print$2}'); do
-			grep -q "$mac" /proc/net/arp || unlisted=$((unlisted+1))
-		done
-
-		ipaddr=$(ifconfig br-wan | grep -v inet6 | grep inet | tr ':' ' ' | awk '{print$3}')
-		netmask=$(ifconfig br-wan | grep -v inet6 | grep inet | tr ':' ' ' | awk '{print$7}')
-		mask=$(mask_to_cidr $netmask)
-	}
-
-	if [ $unlisted -gt 0 -a -n "$ipaddr" -a -n "$netmask" ]; then
-		fping -c 1 -t 1000 -g $ipaddr/$mask -q >/dev/null 2>&1
-	fi
-
-	sleep 20
-done
-
--- a/inteno-netmodes/files/usr/libexec/rpcd/repeater
+++ b/inteno-netmodes/files/usr/libexec/rpcd/repeater
@@ -15,6 +15,7 @@ get_if_creds() {
 		config_get key $section key
 		config_get encryption $section encryption
 		config_get disabled $section disabled 0
+		echo "disabled for $band = $disabled" >>/tmp/dbg
 		[ $disabled -eq 1 ] && return
 		[ "$ssid" == "" -o "$band" == "" ] && return
 		json_add_object
--- a/iop/configs/config
+++ b/iop/configs/config
@@ -56,7 +56,6 @@ CONFIG_PACKAGE_juci-dropbear=y
 CONFIG_PACKAGE_juci-ethernet=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
-CONFIG_PACKAGE_juci-ice-client=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
 CONFIG_PACKAGE_juci-inteno-backup=y
@@ -95,7 +94,6 @@ CONFIG_PACKAGE_libdaemon=y
 CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
 CONFIG_PACKAGE_libreadline=y
-CONFIG_PACKAGE_loop-detector=m
 CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mtd-utils=y
@@ -117,7 +115,6 @@ CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
 CONFIG_PACKAGE_ppp-mod-pppol2tp=y
-CONFIG_PACKAGE_ppp-mod-pptp=y
 CONFIG_PACKAGE_ppp-multilink=y
 # CONFIG_PACKAGE_ppp is not set
 CONFIG_PACKAGE_qos-scripts=y
@@ -159,14 +156,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
 CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
 CONFIG_BUSYBOX_CONFIG_HTTPD=y
 CONFIG_BUSYBOX_CONFIG_INSMOD=y
-CONFIG_BUSYBOX_CONFIG_MODINFO=y
-CONFIG_BUSYBOX_CONFIG_MODPROBE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODPROBE_BLACKLIST=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
-CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
-CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
 CONFIG_BUSYBOX_CONFIG_LSMOD=y
--- a/iop/scripts/extract_core.sh
+++ b/iop/scripts/extract_core.sh
@@ -6,12 +6,15 @@ function extract_core {
 	topdir=$(pwd)

 	# Paths to packages that should be exported.
-	paths+='package/network/services/base-files '
+	paths+='package/network/services/samba36 '
 	paths+='package/network/services/dnsmasq '
+	paths+='package/network/services/dropbear '
+	paths+='package/network/services/odhcpd '
 	paths+='package/network/config/firewall '
 	paths+='package/network/config/netifd '
 	paths+='package/network/config/qos-scripts '
-	paths+='package/system/procd '
+	paths+='package/network/utils/iproute2 '
+	paths+='package/network/utils/curl '
 	paths+='package/utils/busybox '

 	function print_usage {
--- a/iop/scripts/genconfig.sh
+++ b/iop/scripts/genconfig.sh
@@ -9,13 +9,14 @@ function genconfig {
 	CURRENT_CONFIG_FILE=".current_config_file"
 	export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"
 	CUSTPATH="customerconfigs"
+	CUSTREPO="git@private.inteno.se:customerconfigs"
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
 	export DEVELOPER=0
 	LOCAL_MIRROR="http://mirror.inteno.se/mirror"

-	iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25 hpc_hu02"
-	iopsys_brcm63xx_arm="dg400 eg400 f104w f104 dg400prime dg400primeb 963138REF_P502"
+	iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
+	iopsys_brcm63xx_arm="dg400 eg400 f104w dg400prime"
 	iopsys_ramips="ex400"
 	ramips="mt7621"
 	target="bogus"
@@ -155,17 +156,15 @@ function genconfig {

 	setup_dirs()
 	{
-		if ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -qw ${CUSTREPO:22}; then
+		if [ $DEVELOPER -eq 1 ]; then
 			if [ ! -d "$CUSTPATH" ]; then
-				git clone "$CUSTREPO" "$CUSTPATH"
+			git clone "$CUSTREPO" "$CUSTPATH"
 			elif [ $IMPORT -eq 1 ]; then
-				cd $CUSTPATH
-				v "git pull"
-				git pull
-				cd - >/dev/null #go back
+			cd $CUSTPATH
+			v "git pull"
+			git pull
+			cd - >/dev/null #go back
 			fi
-		else
-			echo "You do not have access to $CUSTREPO"
 		fi

 		if [ ! -d "$FILEDIR" ]; then
@@ -193,18 +192,9 @@ function genconfig {
 		if [ $target == "bogus" ]; then
 			echo "Hardware profile does not exist"
 			exit 1
-		elif [ -n "$CUSTOMER" ]; then
-			if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-				echo "Customer profile for '$CUSTOMER' does not exist"
-				exit 1
-			elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-				echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-				if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					echo "Common profile configuration will be used"
-				else
-					exit 1
-				fi
-			fi
+		elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
+			echo "Customer profile does not exist"
+			exit 1
 		fi

 		# Generate base config
@@ -276,9 +266,9 @@ function genconfig {
 		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config

 		# developer mode selected ?
-		echo "CONFIG_DEVEL=y" >>.config
 		if [ $DEVELOPER -eq 1 ]; then
 			# rewrite url to clone with ssh instead of http
+			echo "CONFIG_DEVEL=y" >>.config
 			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
 			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
 			[ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
@@ -286,6 +276,7 @@ function genconfig {
 			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
 			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
 		else
+			echo "CONFIG_DEVEL=n" >>.config
 			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
 			echo "CONFIG_ICE_OPEN=y" >> .config
@@ -304,7 +295,7 @@ function genconfig {
 		# we need to signal to bradcom SDK that we have changed the board id
 		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
 		# so just touch that file.
-		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
+		find build_dir/ -name "boardparms*c" -print0 | xargs -0 touch
 				
 		# Set default values based on selected parameters
 		v "$(make defconfig 2>&1)"
@@ -344,7 +335,6 @@ function genconfig {
 			-n|--no-update) export IMPORT=0;;
 			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
 			-p|--profile) export PROFILE="$2"; shift;;
-			-r|--repo) export CUSTREPO="$2"; shift;;
 			-s|--override) export SRCTREEOVERR=1;;
 			-h|--help) usage;;
 			-l|--list) list_customers 0 $2;;
@@ -358,9 +348,6 @@ function genconfig {
 			esac
 			shift;
 		done
-
-		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
-
 		setup_dirs
 		create_and_copy_files "$1" "$2"
 	fi
--- a/iop/scripts/generate_tarballs.sh
+++ b/iop/scripts/generate_tarballs.sh
@@ -3,15 +3,15 @@

 build_bcmkernel_consumer() {
 	local tarfile bcmkernelcommith sdkversion
-	sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
+    sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
 	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/feed_inteno_broadcom/bcmkernel/$sdkversion.mk | cut -d'=' -f2)
 	# do not build bcmopen sdk if it was already built before
-	ssh $SERVER "ls $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz" && return
+	ssh $SERVER "ls $FPATH/bcmopen-$profile-$bcmkernelcommith.tar.gz" && return
 	cd ./build_dir/target-*_uClibc-0.9.33.*/bcmkernel-3.4-$sdkversion/bcm963xx/release
 	sh do_consumer_release -p $profile -y
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
 	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
-	scp $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
+	scp $tarfile $SERVER:$FPATH/bcmopen-$profile-$bcmkernelcommith.tar.gz
 	rm -f $tarfile
 	cd $curdir
 }
@@ -109,7 +109,6 @@ function generate_tarballs {
    git remote -v | grep -q http && return # do not continue if this is an open SDK environment

    target=$(grep CONFIG_TARGET_BOARD .config | cut -d'=' -f2 | tr -d '"')
-    board=$(grep CONFIG_TARGET_IBOARDID .config | cut -d'=' -f2 | tr -d '"')
    profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
    curdir=$(pwd)

--- a/iop/scripts/ssh_sysupgrade.sh
+++ b/iop/scripts/ssh_sysupgrade.sh
@@ -34,7 +34,7 @@ function ssh_sysupgrade_latest {
 		exit 1
 	fi
 	{ cd `dirname $0`
-		IMAGE=`ls -Art bin/*/*.y[23] | tail -n1`
+		IMAGE=`ls -Art bin/*/*.y2 | tail -n1`
 		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
 	}
 }
--- a/layer2interface/broadcom/etc/hotplug.d/switch/10-switch
+++ b/layer2interface/broadcom/etc/hotplug.d/switch/10-switch
@@ -1,113 +0,0 @@
-. /lib/network/config.sh
-
-# FIX: for EG300 WAN port for release 3.13.1 - 4.x
-if [ "$INTERFACE" == "eth2" ]; then
-	touch /var/update.eth2
-fi
-# end FIX
-
-addif() {
-	# check if wan had a event and start all related services
-	wan=`uci -q get layer2_interface_ethernet.Wan.baseifname`
-	if [ "$INTERFACE" == "$wan" ]; then
-		/etc/init.d/layer2_interface_ethernet start
-		/etc/init.d/layer2_interface_vlan start
-	fi
-}
-
-delif() {
-	##remove ethernet wan and nuke any vlans associated
-	wan=`uci -q get layer2_interface_ethernet.Wan.baseifname`
-	if [ "$INTERFACE" == "$wan"  ]; then
-		/etc/init.d/layer2_interface_ethernet stop
-	fi
-}
-
-# true if speed on interface is Gbit
-gigatest() {
-	local speed=$(ethctl $INTERFACE media-type 2>&1 | awk '{if (NR == 2) print $6}')
-	case "$speed" in
-		1000*) return 0 ;;
-		*) return 1 ;;
-	esac
-}
-
-# true if there is a link on any lan port
-lan_test () {
-	local landev=$(db get hw.board.ethernetLanPorts)
-	local ledontest
-	for dev in $landev; do
-		ledontest=$(cat /sys/class/net/$dev/operstate)
-		if [ "$ledontest" == "up" ]; then
-			return 0
-		fi
-	done
-	return 1
-}
-
-# true if adsl or vdsl is up.
-dsltest() {
-	if cat /var/state/layer2_interface 2>/dev/null | grep 'adsl\|vdsl' | grep up; then
-		return 0
-	else
-		return 1
-	fi
-}
-
-case "$ACTION" in
-	add|register)
-		case "$PHYSDEVDRIVER" in
-			natsemi) sleep 1 ;;
-		esac
-		addif
-		local interfname=$(interfacename $INTERFACE)
-		local operstate=$(cat /sys/class/net/$INTERFACE/operstate)
-#		if [ "$operstate" == "up" ]; then
-		if true ; then
-			case "$interfname" in
-				GbE*)
-					ubus call led.lan           set '{"state" : "ok"}'
-					ubus call led.gbe           set '{"state" : "ok"}'
-					ubus call led.gbe_phy_link  set '{"state" : "ok"}'
-					ubus call led.gbe_phy_speed set '{"state": "off"}'
-					$(gigatest) && ubus call led.gbe_phy_speed set '{"state":"ok"}'
-				;;
-				LAN*)
-					ubus call led.lan set '{"state":"ok"}'
-				;;
-				WAN*)
-					ubus call led.wan           set '{"state" : "ok"}'
-					ubus call led.wan_phy_link  set '{"state" : "ok"}'
-					ubus call led.wan_phy_speed set '{"state" : "off"}'
-					$(gigatest) && ubus call led.wan_phy_speed set '{"state":"ok"}'
-				;;
-			esac
-		fi		
-	;;
-	remove|unregister)
-		local interfname=$(interfacename $INTERFACE)
-		local operstate=$(cat /sys/class/net/$INTERFACE/operstate)
-		if [ "$operstate" == "down" ]; then
-			case "$interfname" in
-				GbE*)
-					ubus call led.gbe           set '{"state" : "off"}'
-					ubus call led.gbe_phy_link  set '{"state" : "off"}'
-					ubus call led.gbe_phy_speed set '{"state" : "off"}'
-					$(lan_test) || ubus call led.lan set '{"state":"off"}'
-				;;
-				LAN*)
-					$(lan_test) || ubus call led.lan set '{"state":"off"}'
-				;;
-				WAN*)
-					ubus call led.wan           set '{"state" : "off"}'
-					ubus call led.wan_phy_speed set '{"state" : "off"}'
-					ubus call led.wan_phy_link  set '{"state" : "off"}'
-					# is this needed here ?? don't the dsl hotplug event control this ???
-#					$(dsltest) || ubus call led.dsl set '{"state":"off"}'
-				;;
-			esac
-		fi
-		delif
-	;;
-esac
-
--- a/layer2interface/broadcom/etc/init.d/layer2_interface
+++ b/layer2interface/broadcom/etc/init.d/layer2_interface
@@ -16,7 +16,6 @@ start_service() {
 	local AnnexL
 	local ADSL2plus
 	local VDSL2
-	local GFast
 	local a8a
 	local b8b
 	local c8c
@@ -24,14 +23,11 @@ start_service() {
 	local a12a
 	local b12b
 	local a17a
-	local a30a
-	local b35b
 	local US0
 	local bitswap
 	local sra
 	local vdsl

-
 	config_load layer2_interface
 	config_get Glite capabilities Glite
 	config_get GDmt capabilities GDmt
@@ -40,7 +36,6 @@ start_service() {
 	config_get ADSL2plus capabilities ADSL2plus
 	config_get AnnexL capabilities AnnexL
 	config_get VDSL2 capabilities VDSL2
-	config_get GFast capabilities GFast
 	config_get AnnexM capabilities AnnexM

 	config_get a8a capabilities 8a
@@ -50,9 +45,6 @@ start_service() {
 	config_get a12a capabilities 12a
 	config_get b12b capabilities 12b
 	config_get a17a capabilities 17a
-	config_get a30a capabilities 30a
-	config_get b35b capabilities 35b
-	config_get BrcmPriv1 capabilities BrcmPriv1

 	config_get US0 capabilities US0
 	config_get bitswap capabilities bitswap
@@ -66,7 +58,6 @@ start_service() {
 	ADSL2plus=$(echo $ADSL2plus | sed 's/Enabled\|1/p/g')
 	AnnexM=$(echo $AnnexM | sed 's/Enabled\|1/m/g')
 	VDSL2=$(echo $VDSL2 | sed 's/Enabled\|1/v/g')
-	GFast=$(echo $GFast | sed 's/Enabled\|1/f/g')

 	a8a=$(echo $a8a | sed 's/Enabled\|1/8a/g')
 	b8b=$(echo $b8b | sed 's/Enabled\|1/8b/g')
@@ -75,10 +66,7 @@ start_service() {
 	a12a=$(echo $a12a | sed 's/Enabled\|1/12a/g')
 	b12b=$(echo $b12b | sed 's/Enabled\|1/12b/g')
 	a17a=$(echo $a17a | sed 's/Enabled\|1/17a/g')
-	a30a=$(echo $a30a | sed 's/Enabled\|1/30a/g')
-	b35b=$(echo $b35b | sed 's/Enabled\|1/BrcmPriv1/g')
-	BrcmPriv1=$(echo $BrcmPriv1 | sed 's/Enabled\|1/BrcmPriv1/g')
-	[ -n "$b35b" ] && BrcmPriv1=""
+
 	US0=$(echo $US0 | sed 's/1/on/g')
 	US0=$(echo $US0 | sed 's/0/off/g')
 	bitswap=$(echo $bitswap | sed 's/1/on/g')
@@ -95,17 +83,13 @@ start_service() {
 	json_get_var vdsl vdsl

 	if [ $vdsl -eq 1 ]; then
-		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2$GFast --profile \"$a8a $b8b $c8c $d8d $a12a $b12b $a17a $a30a $b35b $BrcmPriv1\" --sra $sra --bitswap $bitswap --us0 $US0"
-		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2$GFast --profile "$a8a $b8b $c8c $d8d $a12a $b12b $a17a $a30a $b35b $BrcmPriv1" --sra $sra --bitswap $bitswap --us0 $US0
+		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2 --profile \"$a8a $b8b $c8c $d8d $a12a $b12b $a17a\" --sra $sra --bitswap $bitswap --us0 $US0"
+		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2 --profile "$a8a $b8b $c8c $d8d $a12a $b12b $a17a" --sra $sra --bitswap $bitswap --us0 $US0
 	else
 		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM --sra $sra --bitswap $bitswap"
 		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM --sra $sra --bitswap $bitswap
 	fi

-	if [ "$GFast" == "f" ]; then
-		# enable V43 tone set for GFAST
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x400000 0x400000
-	fi
 }


--- a/layer2interface/broadcom/etc/uci-defaults/20-layer2-config-generate
+++ b/layer2interface/broadcom/etc/uci-defaults/20-layer2-config-generate
@@ -8,6 +8,24 @@ local hasVdsl="$(db -q get hw.board.hasVdsl)"
 local LANPORTS="$(db -q get hw.board.ethernetLanPorts)"
 local WANPORTS=""

+# populate layer2_interface_ethernet #
+if [ "$hasEthWan" == "1" ]; then
+	local wanEthernetPort="$(db -q get hw.board.ethernetWanPort)"
+	wanEthernetPort="${wanEthernetPort:-eth0}"
+	if [ ! -f /etc/config/layer2_interface_ethernet -o -z "$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_ethernet <<EOF
+config ethernet_interface 'Wan'
+	option name 'WAN'
+	option baseifname '${wanEthernetPort}'
+	option ifname '${wanEthernetPort}.1'
+EOF
+	fi
+	local ifname="$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)"
+	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
+elif [ "$hasEthWan" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_ethernet
+fi
+
 # populate layer2_interface #
 if [ "$hasAdsl" == "1" ]; then
 	if [ ! -f /etc/config/layer2_interface -o -z "$(uci -q get layer2_interface.capabilities)" ]; then
@@ -43,28 +61,6 @@ elif [ "$hasAdsl" == "0" -a "$hasVdsl" == "0" ]; then
 	echo "" > /etc/config/layer2_interface
 fi

-# populate layer2_interface_vdsl #
-if [ "$hasVdsl" == "1" ]; then
-	local wanVdslPort=$(db -q get hw.board.vdslWanPort)
-	wanVdslPort="${wanVdslPort:-ptm0}"
-	if [ ! -f /etc/config/layer2_interface_vdsl -o -z "$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)" ]; then
-		cat > /etc/config/layer2_interface_vdsl <<EOF
-config vdsl_interface
-	option 'unit' '0'
-	option 'ifname' '${wanVdslPort}.1'
-	option 'baseifname' '${wanVdslPort}'
-	option 'name' 'VDSL2'
-	option 'dslat' '1'
-	option 'ptmprio' '1'
-	option 'ipqos' '1'
-EOF
-	fi
-	local ifname="$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)"
-	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
-elif [ "$hasVdsl" == "0" ]; then
-	echo "" > /etc/config/layer2_interface_vdsl
-fi
-
 # populate layer2_interface_adsl #
 if [ "$hasAdsl" == "1" ]; then
 	local wanAdslPort=$(db -q get hw.board.adslWanPort)
@@ -89,22 +85,26 @@ elif [ "$hasAdsl" == "0" ]; then
 	echo "" > /etc/config/layer2_interface_adsl
 fi

-# populate layer2_interface_ethernet #
-if [ "$hasEthWan" == "1" ]; then
-	local wanEthernetPort="$(db -q get hw.board.ethernetWanPort)"
-	wanEthernetPort="${wanEthernetPort:-eth0}"
-	if [ ! -f /etc/config/layer2_interface_ethernet -o -z "$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)" ]; then
-		cat > /etc/config/layer2_interface_ethernet <<EOF
-config ethernet_interface 'Wan'
-	option name 'WAN'
-	option baseifname '${wanEthernetPort}'
-	option ifname '${wanEthernetPort}.1'
+# populate layer2_interface_vdsl #
+if [ "$hasVdsl" == "1" ]; then
+	local wanVdslPort=$(db -q get hw.board.vdslWanPort)
+	wanVdslPort="${wanVdslPort:-ptm0}"
+	if [ ! -f /etc/config/layer2_interface_vdsl -o -z "$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_vdsl <<EOF
+config vdsl_interface
+	option 'unit' '0'
+	option 'ifname' '${wanVdslPort}.1'
+	option 'baseifname' '${wanVdslPort}'
+	option 'name' 'VDSL2'
+	option 'dslat' '1'
+	option 'ptmprio' '1'
+	option 'ipqos' '1'
 EOF
 	fi
-	local ifname="$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)"
+	local ifname="$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)"
 	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
-elif [ "$hasEthWan" == "0" ]; then
-	echo "" > /etc/config/layer2_interface_ethernet
+elif [ "$hasVdsl" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_vdsl
 fi

 # populate network config ifnames #
--- a/loop-detector/Makefile
+++ b/loop-detector/Makefile
@@ -1,48 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=loop-detector
-PKG_VERSION:=1.0
-
-PKG_SOURCE_VERSION:=d0fb770eacd6691b98df138b60f5116e02f71a9b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/loop-detector
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-
-define Package/loop-detector
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=L2 Loop detector
-  DEPENDS:= +libpcap +libuci +libpthread
-endef
-
-define Package/loop-detector/description
-	L2 Loop detection package
-endef
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE
-
-TARGET_LDFLAGS += \
-	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
-
-CONFIGURE_ARGS += \
-	--with-uci-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-
-define Package/loop-detector/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/loop-detector $(1)/sbin/
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(CP) ./files/loop_detection.init $(1)/etc/init.d/loop_detection
-	$(INSTALL_DIR) $(1)/etc/config
-	$(CP) ./files/loop_detection.config $(1)/etc/config/loop_detection
-endef
-
-$(eval $(call BuildPackage,loop-detector))
--- a/loop-detector/files/loop_detection.config
+++ b/loop-detector/files/loop_detection.config
@@ -1,5 +0,0 @@
-config loop-detect loop
-	option enabled '1'
-	option discovery_interval '10'
-	option recovery_check_tries '5'
-
--- a/loop-detector/files/loop_detection.init
+++ b/loop-detector/files/loop_detection.init
@@ -1,36 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=21
-STOP=89
-
-USE_PROCD=1
-NAME=loop-detector
-
-start_service() {
-	local enabled
-
-	config_load loop_detection
-	config_get_bool enabled loop enabled 1
-
-	if [ $enabled -eq 1 ]; then
-		procd_open_instance
-		procd_set_param command "/sbin/loop-detector"
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-stop() {
-	service_stop /sbin/loop-detector
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger loop_detection
-}
-
-reload_service() {
-	stop
-	start
-}
-
--- a/mtk-bndstrg/Makefile
+++ b/mtk-bndstrg/Makefile
@@ -5,13 +5,13 @@ PKG_NAME:=mtk-bndstrg
 PKG_VERSION:=1.0
 PKG_RELEASE:=1

-PKG_SOURCE_VERSION:=a67f5ccdf9bc6810f15f1ece9edaad5e89cad0f7
+PKG_SOURCE_VERSION:=8a804320c53dead1c9b9f3650cbbc58908c76832
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/mtk-bndstrg

-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)

 include $(INCLUDE_DIR)/package.mk

--- a/peripheral_manager/Makefile
+++ b/peripheral_manager/Makefile
@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1

-PKG_SOURCE_VERSION:=959eca8ab2b50eaccfff9c710cffe5b317bb6ad1
+PKG_SOURCE_VERSION:=a9e0b8ea80511ef16ef71c59412bcd9b90beb7fe
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se/peripheral_manager

--- a/port-management/files/etc/init.d/port_management
+++ b/port-management/files/etc/init.d/port_management
@@ -62,25 +62,18 @@ get_current_status() {
 	fi
 }

-get_flag(){
+sfp_flag(){
 	local port=$1
 	local sfptype=$2
-	local eg300="$(ethctl $port media-type 2>&1 | grep 'This is probably wrong')"
-	local eg400="$(ethctl $port media-type 2>&1 | grep 'Error: Interface eth0 has sub ports, please specified one')"
-	if [ -n "$eg300" ]; then
-		echo "sfp copper"
-	elif [ -n "$eg400" ]; then
-		echo "port 10"
-	else
-		echo ""
-	fi
+	local media="$(ethctl $port media-type 2>&1 | grep 'This is probably wrong')"
+	[ -z "$media" ] && echo "" || echo "sfp $sfptype"
 }

 set_port_status() {
 	local port="$1"
 	local status="$2"
-	local flag=$(get_flag $port)
-	local curstatus=$(get_current_status "$port" "$flag")
+	local flag=$(sfp_flag $port "copper")
+	local curstatus=$(get_current_status $port $flag)

 	ifconfig $port >/dev/null 2>&1 || return

@@ -100,14 +93,14 @@ set_port_status() {
 						esac
 					;;
 					10*AUTO)
-						ethctl $port media-type advertise $status $flag
+						ethctl $port media-type $flag advertise $status
 					;;
 					10*)
-						ethctl $port media-type $status $flag
+						ethctl $port media-type $flag $status
 					;;
 					*)
-						ethctl $port media-type advertise 1000FDAUTO $flag
-						ethctl $port media-type auto $flag
+						ethctl $port media-type $flag advertise 1000FDAUTO
+						ethctl $port media-type $flag auto
 					;;
 				esac
 			else
--- a/port-management/files/etc/init.d/sfp_management
+++ b/port-management/files/etc/init.d/sfp_management
@@ -23,24 +23,18 @@ get_current_status() {
 	fi
 }

-get_flag(){
+sfp_flag(){
 	local port=$1
-	local eg300="$(ethctl $port media-type 2>&1 | grep 'This is probably wrong')"
-	local eg400="$(ethctl $port media-type 2>&1 | grep 'Error: Interface eth0 has sub ports, please specified one')"
-	if [ -n "$eg300" ]; then
-		echo "sfp fiber"
-	elif [ -n "$eg400" ]; then
-		echo "port 9"
-	else
-		echo ""
-	fi
+	local sfptype=$2
+	local media="$(ethctl $port media-type 2>&1 | grep 'This is probably wrong')"
+	[ -z "$media" ] && echo "" || echo "sfp $sfptype"
 }

 set_fiber_status() {
 	local port="$1"
 	local status="$2"
-	local flag=$(get_flag $port)
-	local curstatus=$(get_current_status "$port" "$flag")
+	local flag=$(sfp_flag $port "fiber")
+	local curstatus=$(get_current_status $port $flag)

 	case "$status" in
 		disabled)
--- a/questd/Makefile
+++ b/questd/Makefile
@@ -6,9 +6,9 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk

 PKG_NAME:=questd
-PKG_VERSION:=3.1.40
+PKG_VERSION:=3.1.38

-PKG_SOURCE_VERSION:=b2794295fdf9469b6cd8ba1544f291d4b83a7d5a
+PKG_SOURCE_VERSION:=41d563397f936dd7dd6db13d07e44ed9ef86f62a
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/questd

@@ -43,7 +43,7 @@ export QUESTD_CFLAGS

 define Package/questd
 	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +ubus +libpthread +(TARGET_iopsys_ramips_ex400):swconfig +(TARGET_iopsys_ramips_ex400):libnl-tiny +libopenssl
+	DEPENDS:=+libuci +libubox +ubus +libpthread +(TARGET_iopsys_ramips_ex400):swconfig +(TARGET_iopsys_ramips_ex400):libnl-tiny
 	TITLE:=router info daemon
 endef

--- a/questd/files/etc/init.d/quest
+++ b/questd/files/etc/init.d/quest
@@ -21,8 +21,8 @@ start_service() {
 }

 stop() {
-	#stop_service() is called after procd killed the service
-	echo ;
+	service_stop /sbin/questd
+	service_stop /sbin/graphd
 }

 service_triggers()
--- a/questd/files/sbin/imonitor
+++ b/questd/files/sbin/imonitor
@@ -1,7 +1,6 @@
 #!/bin/sh

 . /lib/functions.sh
-. /usr/share/libubox/jshn.sh

 # 1. sleep for $SLEEP_LONG seconds
 # 2. run the check_* functions
@@ -23,7 +22,7 @@ NPROC_COUNT=4	# number of time that the NPROC_LIMIT has to be hit to trigger a p
 NPROC_NFAIL=0	# current consecutive Number of FAILures. process restarts when NPROC_NFAIL == NPROC_COUNT

 # memmory limit
-MEM_LIMIT=20000
+MEM_LIMIT=15000
 MEM_COUNT=4
 MEM_NFAIL=0

@@ -32,9 +31,6 @@ PCPU_LIMIT=38
 PCPU_COUNT=4
 PCPU_NFAIL=0

-# network call check
-NNET_NFAIL=0
-
 UBUS_TIMEOUT=5


@@ -43,7 +39,7 @@ ACSDBIN=$(which acsd)

 restart_questd()
 {
-	logger -s -t $0[$$] "Restarting questd. $NPROC_NFAIL $MEM_NFAIL $PCPU_NFAIL $NNET_NFAIL"
+	logger -s -t $0[$$] "Restarting questd. $NPROC_NFAIL $MEM_NFAIL $PCPU_NFAIL"

 	killall -q -KILL questd
 	/etc/init.d/quest stop
@@ -53,7 +49,6 @@ restart_questd()
 	NPROC_NFAIL=0
 	MEM_NFAIL=0
 	PCPU_NFAIL=0
-	NNET_NFAIL=0
 }


@@ -115,38 +110,21 @@ check_pcpu()

 check_ubuscall()
 {
-		local rv
+	local rv

-		ubus -t $UBUS_TIMEOUT call router.system info >/dev/null 2>&1
-		rv=$?
+	ubus -t $UBUS_TIMEOUT call router.system info >/dev/null 2>&1
+	rv=$?

-		[ "$rv" = "0" ] && return 0
-		return 1
+	[ "$rv" = "0" ] && return 0
+	return 1
 }

-check_ubus_network_call() {
-	[ "$(uci -q get network.lan)" == "interface" ] || return 0
-	json_load "$(ifstatus lan)" || return 0
-	json_get_var up up
-	[ $up -eq 1 ] || return 0
-	local ifname="$(uci -q get network.lan.ifname)"
-	[ -z "$ifname" -o "${ifname:0:3}" == "br-" ] && return 0
-	ubus -t 5 call router.network ports '{"network":"lan"}' | grep -q statistics || {
-		NNET_NFAIL=1
-		return 1
-	}
-	return 0
-}

 restart_bsd()
 {
-	logger -s -t $0[$$] "Restarting WiFi and Band Steering daemon due to bsd hangup."
-	killall -q -15 bsd 2>/dev/null
-	wlctl -i wl0 down 2>/dev/null
-	wlctl -i wl1 down 2>/dev/null
-	wlctl -i wl0 up 2>/dev/null
-	wlctl -i wl1 up 2>/dev/null
-	bsd &
+	logger -s -t $0[$$] "Restarting bsd."
+	killall -q -KILL bsd
+	bsd
 }

 check_bsdcall()
@@ -163,13 +141,9 @@ check_bsdcall()

 restart_acsd()
 {
-	logger -s -t $0[$$] "Restarting WiFi and Auto Channel Selection daemon due to acsd high CPU usage."
-	killall -q -9 acsd 2>/dev/null
-	wlctl -i wl0 down 2>/dev/null
-	wlctl -i wl1 down 2>/dev/null
-	wlctl -i wl0 up 2>/dev/null
-	wlctl -i wl1 up 2>/dev/null
-	acsd
+	logger -s -t $0[$$] "Restarting acsd."
+	killall -q -KILL acsd
+	acsd &
 }

 check_acsd()
@@ -181,7 +155,7 @@ check_acsd()

 	for p in $pcpu; do
 		p=${p%%%*}
-		if [ "$p" -ge "40" ]; then
+		if [ "$p" -ge "20" ]; then
 			return 1
 		fi
 	done
@@ -219,11 +193,8 @@ main()
 			"$restart_mem"   = "1" -o \
 			"$restart_pcpu"  = "1" ]
 		then
+			# check_ubuscall || restart_questd
 			restart_questd
-		else
-			if [ "$sample" -ge "$SAMPLES" ]; then
-				check_ubus_network_call || restart_questd
-			fi
 		fi

 		if [ "$BSDBIN" ] ; then
--- a/samba2/Makefile
+++ b/samba2/Makefile
@@ -55,14 +55,11 @@ define Package/samba2-client
 endef

 TARGET_CFLAGS += $(FPIC)
-WERR := -Werror=format-security
-TARGET_CFLAGS_WITHOUT_WERR := $(filter-out $(WERR),$(TARGET_CFLAGS))

 define Build/Compile	
 	rm -rf $(PKG_INSTALL_DIR)
 	mkdir -p $(PKG_INSTALL_DIR)
 	(cd $(PKG_BUILD_DIR)/source ; rm -rf config.{cache,status} ; \
-		CFLAGS="-D_LARGEFILE64_SOURCE -D_GNU_SOURCE" \
 		./configure \
 			$(HOST_CONFIGURE_VARS) \
 			$(HOST_CONFIGURE_ARGS) \
@@ -96,7 +93,7 @@ define Build/Compile
 		clean
 	(cd $(PKG_BUILD_DIR)/source; rm -rf config.{cache,status}; \
 		$(TARGET_CONFIGURE_OPTS) \
-		CFLAGS="$(TARGET_CFLAGS_WITHOUT_WERR) -D_GNU_SOURCE -DNDEBUG -DSHMEM_SIZE=524288" \
+		CFLAGS="$(TARGET_CFLAGS) -D_GNU_SOURCE -DNDEBUG -DSHMEM_SIZE=524288 -Dfcntl=fcntl64" \
 		CPPFLAGS="$(TARGET_CPPFLAGS)" \
 		LDFLAGS="$(TARGET_LDFLAGS) $(LIBGCC_S)" \
 		ac_cv_lib_cups_httpConnect=no \
--- a/samba3/patches/520-fix_samba3_compilation_error
+++ b/samba3/patches/520-fix_samba3_compilation_error
@@ -1,40 +0,0 @@
--- a/source/utils/owrt_smbpasswd.c	2017-10-03 15:57:24.190827000 +0100
-+++ a/source/utils/owrt_smbpasswd.c	2017-10-03 16:07:54.862857000 +0100
-@@ -108,7 +108,7 @@
- 		}
- 	}
- 
-	fprintf(fp, line);
-+	fprintf(fp, "%s", line);
- 
- out:
- 	if(fp)
-@@ -134,20 +134,20 @@
- 			p = strchr(t, ':');
- 			if(p && (p - t == strlen(user)) && (strncmp(t, user, strlen(user))) == 0)
- 			{
-				fpos_t r_pos, w_pos;
-+				long int r_pos, w_pos;
- 				char t2[256];
-				fgetpos(fp, &r_pos);
-+				r_pos = ftell(fp);
- 				w_pos = r_pos;
-				w_pos.__pos -= strlen(t);
-+				w_pos -= strlen(t);
- 				while(fgets(t2, 256, fp))
- 				{
-					fsetpos(fp, &w_pos);
-+					fseek(fp, w_pos, SEEK_SET);
- 					fputs(t2, fp);
-					r_pos.__pos += strlen(t2);
-					w_pos.__pos += strlen(t2);
-					fsetpos(fp, &r_pos);
-+					r_pos += strlen(t2);
-+					w_pos += strlen(t2);
-+					fseek(fp, r_pos, SEEK_SET);
- 				}
-				ftruncate(fileno(fp), w_pos.__pos);
-+				ftruncate(fileno(fp), w_pos);
- 				break;
- 			}
- 		}
--- a/tptest/files/etc/config/speedtest
+++ b/tptest/files/etc/config/speedtest
@@ -1,5 +1,8 @@
-
 config testserver '1'
+	option server 'tptest.bredband.net'
+	option port '1640'
+
+config testserver '2'
 	option server 'referens.sth.ip-performance.se'
 	option port '1642'

--- a/tr064/.cproject
+++ b/tr064/.cproject
@@ -1,107 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
-	<storageModule moduleId="org.eclipse.cdt.core.settings">
-		<cconfiguration id="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916">
-			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916" moduleId="org.eclipse.cdt.core.settings" name="Debug">
-				<externalSettings/>
-				<extensions>
-					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
-					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-				</extensions>
-			</storageModule>
-			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916" name="Debug" parent="cdt.managedbuild.config.gnu.cross.exe.debug">
-					<folderInfo id="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916." name="/" resourcePath="">
-						<toolChain id="cdt.managedbuild.toolchain.gnu.cross.exe.debug.482080998" name="Cross GCC" superClass="cdt.managedbuild.toolchain.gnu.cross.exe.debug">
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="cdt.managedbuild.targetPlatform.gnu.cross.1864775892" isAbstract="false" osList="all" superClass="cdt.managedbuild.targetPlatform.gnu.cross"/>
-							<builder buildPath="${workspace_loc:/tr064}/Debug" id="cdt.managedbuild.builder.gnu.cross.84968765" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="cdt.managedbuild.builder.gnu.cross"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.c.compiler.912678595" name="Cross GCC Compiler" superClass="cdt.managedbuild.tool.gnu.cross.c.compiler">
-								<option defaultValue="gnu.c.optimization.level.none" id="gnu.c.compiler.option.optimization.level.732187738" name="Optimization Level" superClass="gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" valueType="enumerated"/>
-								<option id="gnu.c.compiler.option.debugging.level.406132207" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.max" valueType="enumerated"/>
-								<inputType id="cdt.managedbuild.tool.gnu.c.compiler.input.656190220" superClass="cdt.managedbuild.tool.gnu.c.compiler.input"/>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.cpp.compiler.894741631" name="Cross G++ Compiler" superClass="cdt.managedbuild.tool.gnu.cross.cpp.compiler">
-								<option id="gnu.cpp.compiler.option.optimization.level.1987025848" name="Optimization Level" superClass="gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.optimization.level.none" valueType="enumerated"/>
-								<option id="gnu.cpp.compiler.option.debugging.level.1506505331" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.max" valueType="enumerated"/>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.c.linker.1176314661" name="Cross GCC Linker" superClass="cdt.managedbuild.tool.gnu.cross.c.linker">
-								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1134635640" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
-									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
-									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
-								</inputType>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.cpp.linker.1076025733" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.archiver.862614592" name="Cross GCC Archiver" superClass="cdt.managedbuild.tool.gnu.cross.archiver"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.assembler.638528350" name="Cross GCC Assembler" superClass="cdt.managedbuild.tool.gnu.cross.assembler">
-								<inputType id="cdt.managedbuild.tool.gnu.assembler.input.390953300" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
-							</tool>
-						</toolChain>
-					</folderInfo>
-				</configuration>
-			</storageModule>
-			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
-		</cconfiguration>
-		<cconfiguration id="cdt.managedbuild.config.gnu.cross.exe.release.517635632">
-			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.cross.exe.release.517635632" moduleId="org.eclipse.cdt.core.settings" name="Release">
-				<externalSettings/>
-				<extensions>
-					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
-					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-				</extensions>
-			</storageModule>
-			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.cross.exe.release.517635632" name="Release" parent="cdt.managedbuild.config.gnu.cross.exe.release">
-					<folderInfo id="cdt.managedbuild.config.gnu.cross.exe.release.517635632." name="/" resourcePath="">
-						<toolChain id="cdt.managedbuild.toolchain.gnu.cross.exe.release.2086871607" name="Cross GCC" superClass="cdt.managedbuild.toolchain.gnu.cross.exe.release">
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="cdt.managedbuild.targetPlatform.gnu.cross.1691338213" isAbstract="false" osList="all" superClass="cdt.managedbuild.targetPlatform.gnu.cross"/>
-							<builder buildPath="${workspace_loc:/tr064}/Release" id="cdt.managedbuild.builder.gnu.cross.2045398730" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="cdt.managedbuild.builder.gnu.cross"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.c.compiler.804948441" name="Cross GCC Compiler" superClass="cdt.managedbuild.tool.gnu.cross.c.compiler">
-								<option defaultValue="gnu.c.optimization.level.most" id="gnu.c.compiler.option.optimization.level.422910401" name="Optimization Level" superClass="gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" valueType="enumerated"/>
-								<option id="gnu.c.compiler.option.debugging.level.1240870180" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.none" valueType="enumerated"/>
-								<inputType id="cdt.managedbuild.tool.gnu.c.compiler.input.118715116" superClass="cdt.managedbuild.tool.gnu.c.compiler.input"/>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.cpp.compiler.119838407" name="Cross G++ Compiler" superClass="cdt.managedbuild.tool.gnu.cross.cpp.compiler">
-								<option id="gnu.cpp.compiler.option.optimization.level.198417757" name="Optimization Level" superClass="gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.optimization.level.most" valueType="enumerated"/>
-								<option id="gnu.cpp.compiler.option.debugging.level.380023243" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.none" valueType="enumerated"/>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.c.linker.751400281" name="Cross GCC Linker" superClass="cdt.managedbuild.tool.gnu.cross.c.linker">
-								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.398459196" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
-									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
-									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
-								</inputType>
-							</tool>
-							<tool id="cdt.managedbuild.tool.gnu.cross.cpp.linker.1354328537" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.archiver.1258554594" name="Cross GCC Archiver" superClass="cdt.managedbuild.tool.gnu.cross.archiver"/>
-							<tool id="cdt.managedbuild.tool.gnu.cross.assembler.2022763402" name="Cross GCC Assembler" superClass="cdt.managedbuild.tool.gnu.cross.assembler">
-								<inputType id="cdt.managedbuild.tool.gnu.assembler.input.1223740654" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
-							</tool>
-						</toolChain>
-					</folderInfo>
-				</configuration>
-			</storageModule>
-			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
-		</cconfiguration>
-	</storageModule>
-	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-		<project id="tr064.cdt.managedbuild.target.gnu.cross.exe.1457888368" name="Executable" projectType="cdt.managedbuild.target.gnu.cross.exe"/>
-	</storageModule>
-	<storageModule moduleId="scannerConfiguration">
-		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		<scannerConfigBuildInfo instanceId="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916;cdt.managedbuild.config.gnu.cross.exe.debug.1423203916.;cdt.managedbuild.tool.gnu.cross.c.compiler.912678595;cdt.managedbuild.tool.gnu.c.compiler.input.656190220">
-			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		</scannerConfigBuildInfo>
-		<scannerConfigBuildInfo instanceId="cdt.managedbuild.config.gnu.cross.exe.release.517635632;cdt.managedbuild.config.gnu.cross.exe.release.517635632.;cdt.managedbuild.tool.gnu.cross.c.compiler.804948441;cdt.managedbuild.tool.gnu.c.compiler.input.118715116">
-			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		</scannerConfigBuildInfo>
-	</storageModule>
-	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
-	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
-</cproject>
--- a/tr064/.project
+++ b/tr064/.project
@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<projectDescription>
-	<name>tr064</name>
-	<comment></comment>
-	<projects>
-		<project>openssl-1.0.2i</project>
-	</projects>
-	<buildSpec>
-		<buildCommand>
-			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
-			<triggers>clean,full,incremental,</triggers>
-			<arguments>
-			</arguments>
-		</buildCommand>
-		<buildCommand>
-			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
-			<triggers>full,incremental,</triggers>
-			<arguments>
-			</arguments>
-		</buildCommand>
-	</buildSpec>
-	<natures>
-		<nature>org.eclipse.cdt.core.cnature</nature>
-		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
-		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
-	</natures>
-</projectDescription>
--- a/tr064/.settings/language.settings.xml
+++ b/tr064/.settings/language.settings.xml
@@ -1,25 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<project>
-	<configuration id="cdt.managedbuild.config.gnu.cross.exe.debug.1423203916" name="Debug">
-		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
-			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
-			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
-			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider class="org.eclipse.cdt.internal.build.crossgcc.CrossGCCBuiltinSpecsDetector" console="false" env-hash="1404192411374960532" id="org.eclipse.cdt.build.crossgcc.CrossGCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT Cross GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
-				<language-scope id="org.eclipse.cdt.core.gcc"/>
-				<language-scope id="org.eclipse.cdt.core.g++"/>
-			</provider>
-		</extension>
-	</configuration>
-	<configuration id="cdt.managedbuild.config.gnu.cross.exe.release.517635632" name="Release">
-		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
-			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
-			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
-			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider class="org.eclipse.cdt.internal.build.crossgcc.CrossGCCBuiltinSpecsDetector" console="false" env-hash="1404192411374960532" id="org.eclipse.cdt.build.crossgcc.CrossGCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT Cross GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
-				<language-scope id="org.eclipse.cdt.core.gcc"/>
-				<language-scope id="org.eclipse.cdt.core.g++"/>
-			</provider>
-		</extension>
-	</configuration>
-</project>
--- a/tr064/Makefile
+++ b/tr064/Makefile
@@ -1,82 +0,0 @@
-# Copyright (C) 2017 PIVA Software <www.pivasoftware.com>
-# 	Author: OMAR Kallel <omar.kallel@pivasoftware.com>
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=tr064
-PKG_VERSION:=1.0
-PKG_SOURCE_URL:=git@public.inteno.se:tr064.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e53d492a09c433718a520987c419cb6a4d4ae8dc
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_CONFIG_DEPENDS:= \
-	CONFIG_TR064_DEBUG \
-	CONFIG_TR064_DEVEL
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/tr064
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=tr064
-  DEPENDS:=+libubus +libuci +libubox +libmicroxml +libjson-c +libpthread +libdatamodel +libopenssl +libubus +libubox
-endef
-
-define Package/tr064/description
-	TR-064 protocol
-endef
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE
-
-TARGET_LDFLAGS += \
-	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
-
-CONFIGURE_ARGS += \
-	--with-uci-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-
-ifeq ($(CONFIG_TR064_DEBUG),y)
-CONFIGURE_ARGS += \
-	--enable-debug
-endif
-
-ifeq ($(CONFIG_TR064_DEVEL),y)
-CONFIGURE_ARGS += \
-	--enable-devel
-endif
-
-CONFIGURE_ARGS += \
-	--enable-jsonc=1
-
-define Package/tr064/conffiles
-/etc/config/tr064
-endef
-
-define Package/tr064/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/upnp-md
-	$(INSTALL_DIR) $(1)/etc/upnp-md/web
-	$(INSTALL_DIR) $(1)/etc/upnp-md/x509
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/upnp-md-pupnp/upnp-md $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/web/*.xml $(1)/etc/upnp-md/web
-	$(CP) $(PKG_BUILD_DIR)/tools/parse_ftp_server_log.sh $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/tools/kill_child.sh $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/x509/*.pem $(1)/etc/upnp-md/x509
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/conf/upnp-md.conf $(1)/etc/upnp-md
-	$(CP) $(PKG_BUILD_DIR)/conf/DMconf.xml $(1)/etc/upnp-md
-	$(CP) $(PKG_BUILD_DIR)/conf/CPID.csv $(1)/etc/upnp-md
-	$(CP) $(PKG_BUILD_DIR)/conf/tr064 $(1)/etc/config
-	$(CP) $(PKG_BUILD_DIR)/conf/tr064d $(1)/etc/init.d
-	chmod 0744 $(1)/etc/init.d/tr064d
-endef
-
-$(eval $(call BuildPackage,tr064))
--- a/uboot/Makefile
+++ b/uboot/Makefile
@@ -9,10 +9,10 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=u-boot
 PKG_VERSION:=2016.08
-PKG_RELEASE:=4
+PKG_RELEASE:=3
 PKG_SOURCE_URL:=http://public.inteno.se:/uboot
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f502d1b589f14142bf7d7719e8434014f180d03f
+PKG_SOURCE_VERSION:=064c9c30ff159c9bf3fa695baddd54279cd0f062

 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
--- a/voice-client/Makefile
+++ b/voice-client/Makefile
@@ -16,7 +16,7 @@ define Package/voice-client
  SECTION:=net
  CATEGORY:=Network
  TITLE:=voice-client
-  DEPENDS:=asterisk13||asterisk18-mod
+  DEPENDS:=+asterisk18-mod
 endef

 define Package/voice-client/description
--- a/voice-client/files/etc/init.d/voice_client
+++ b/voice-client/files/etc/init.d/voice_client
@@ -68,7 +68,6 @@ TMPL_ASTERISK=$TEMPLATEDIR/asterisk.conf.TEMPLATE
 TMPL_CDR=$TEMPLATEDIR/cdr.conf.TEMPLATE
 TMPL_CDR_SYSLOG=$TEMPLATEDIR/cdr_syslog.conf.TEMPLATE
 TMPL_INDICATIONS=$TEMPLATEDIR/indications.conf.TEMPLATE
-TMPL_CEL=$TEMPLATEDIR/cel.conf.TEMPLATE
 TMPL_LOGGER=$TEMPLATEDIR/logger.conf.TEMPLATE
 TMPL_MANAGER=$TEMPLATEDIR/manager.conf.TEMPLATE
 TMPL_MODULES=$TEMPLATEDIR/modules.conf.TEMPLATE
@@ -81,7 +80,7 @@ TMPL_BRCM_LINE=$TEMPLATEDIR/brcm_line.TEMPLATE

 TMPL_MEETME=$TEMPLATEDIR/meetme.conf.TEMPLATE

-SPECRATECFG=$ASTERISKDIR/special_rate_nr.cfg
+SPECRATEDIR=$ASTERISKDIR/special_rate_nr.cfg

 run_hook()
 {
@@ -98,13 +97,13 @@ escape_sed_substitution()
 # Gets rid of any config files from $ASTERISKDIR not found in $WORKDIR.
 clean_up_asterisk_config_dir()
 {
-	for f in $ASTERISKDIR/* ; do
-		basef="`basename $f`"
-		if [ ! -e "$WORKDIR/$basef" ] ; then
-			rm -rf "$f"
+        for f in $ASTERISKDIR/* ; do
+                basef="`basename $f`"
+                if [ ! -e "$WORKDIR/$basef" ] ; then
+                        rm -rf "$f"
 			echo "$f" >> /tmp/voice.log
-		fi
-	done
+                fi
+        done
 }

 # Compares md5sums of the config files in $WORKDIR to those
@@ -114,7 +113,7 @@ compare_configs_and_copy_changed()
 {
 	# First, compute md5sums of the config files in $WORKDIR.
 	cd $WORKDIR/
-	md5sum * > $MD5SUMSFILE 2>/dev/null
+	md5sum * > $MD5SUMSFILE

 	# Now, check the files in $ASTERISKDIR against the md5sums.
 	cd $ASTERISKDIR/
@@ -142,15 +141,15 @@ assemble_and_copy_config()
 	# start if a config item is missing and an included config file isn't created.

 	# Copy the template files which we don't edit.
-	[ -f $TMPL_ASTERISK ]		&& cp $TMPL_ASTERISK		$WORKDIR/asterisk.conf
-	[ -f $TMPL_CDR ]		&& cp $TMPL_CDR			$WORKDIR/cdr.conf
-	[ -f $TMPL_CEL ]		&& cp $TMPL_CEL			$WORKDIR/cel.conf
-	[ -f $TMPL_INDICATIONS ]	&& cp $TMPL_INDICATIONS		$WORKDIR/indications.conf
-	[ -f $TMPL_MANAGER ]		&& cp $TMPL_MANAGER		$WORKDIR/manager.conf
-	[ -f $TMPL_MODULES ]		&& cp $TMPL_MODULES		$WORKDIR/modules.conf
-	[ -f $TMPL_EXTENSIONS_MACRO ]	&& cp $TMPL_EXTENSIONS_MACRO	$WORKDIR/extensions_macro.conf
-	[ -f $TMPL_MUSICONHOLD ]	&& cp $TMPL_MUSICONHOLD		$WORKDIR/musiconhold.conf
-	[ -f $SPECRATECFG ]		&& cp $SPECRATECFG		$WORKDIR/special_rate_nr.cfg
+	cp $TMPL_ASTERISK		$WORKDIR/asterisk.conf
+	cp $TMPL_CDR			$WORKDIR/cdr.conf
+	cp $TMPL_CEL			$WORKDIR/cel.conf
+	cp $TMPL_INDICATIONS		$WORKDIR/indications.conf
+	cp $TMPL_MANAGER		$WORKDIR/manager.conf
+	cp $TMPL_MODULES		$WORKDIR/modules.conf
+	cp $TMPL_EXTENSIONS_MACRO	$WORKDIR/extensions_macro.conf
+	cp $TMPL_MUSICONHOLD		$WORKDIR/musiconhold.conf
+	cp $SPECRATEDIR                 $WORKDIR/special_rate_nr.cfg
 	
 	test -e $TMPL_MEETME && cp $TMPL_MEETME $WORKDIR/meetme.conf
 	
@@ -179,7 +178,7 @@ assemble_and_copy_config()
 	mv $WORKDIR/features.tmp		$WORKDIR/features.conf
 	mv $WORKDIR/voicemail.tmp		$WORKDIR/voicemail.conf
 	mv $WORKDIR/meetme.tmp			$WORKDIR/meetme.conf
-	mv $WORKDIR/logger.tmp			$WORKDIR/logger.conf
+        mv $WORKDIR/logger.tmp			$WORKDIR/logger.conf
 	mv $WORKDIR/queues.tmp			$WORKDIR/queues.conf
 	mv $WORKDIR/dnsmgr.tmp			$WORKDIR/dnsmgr.conf

@@ -468,13 +467,13 @@ configure_sip()
 	if [ -z "$registertimeoutbackoff" ] ; then
 		sed -i "s/registertimeoutbackoff=|REGISTERTIMEOUTBACKOFF|/;registertimeoutbackoff=/g"    $WORKDIR/sip.tmp
 	else
-		sed -i "s/|REGISTERTIMEOUTBACKOFF|/$registertimeoutbackoff/g"			     $WORKDIR/sip.tmp
+		sed -i "s/|REGISTERTIMEOUTBACKOFF|/$registertimeoutbackoff/g"                             $WORKDIR/sip.tmp
 	fi

 	if [ -z "$registerattemptsbackoff" ] ; then
 		sed -i "s/registerattemptsbackoff=|REGISTERATTEMPTSBACKOFF|/;registerattemptsbackoff=/g"  $WORKDIR/sip.tmp
 	else
-		sed -i "s/|REGISTERATTEMPTSBACKOFF|/$registerattemptsbackoff/g"			   $WORKDIR/sip.tmp
+		sed -i "s/|REGISTERATTEMPTSBACKOFF|/$registerattemptsbackoff/g"                           $WORKDIR/sip.tmp
 	fi

 	if [ -z "$register403timeout" ] ; then
@@ -543,7 +542,7 @@ configure_sip()
 	for section in ${CONFIG_SECTIONS}; do
 		local transport
 		config_get cfgtype "$section" TYPE
-		[ -n "$type" -a "x$cfgtype" != "x$type" ] && continue
+	        [ -n "$type" -a "x$cfgtype" != "x$type" ] && continue
 		config_get transport $section transport
 		if [ "$transport" == "tls" ] ; then
 			tlsenable="yes"
@@ -805,7 +804,7 @@ configure_sip_provider()
 	fi
 	sed -i "s/|AUTOFRAMING|/$autoframing/"			$WORKDIR/sip_provider.tmp

-	# Set registered extension so that incoming calls match the correct peer
+	# Set registered extension so that incoming calls match the correct peer                     
 	sed -i "s/|CONTACT_USER|/$user/g"      $WORKDIR/sip_provider.tmp

 	# Add SIP Provider configuration to the temp file containing all SIP Provider configs.
@@ -1036,7 +1035,7 @@ configure_queue()
 	echo "[macro-$1]" >>					$WORKDIR/macros.tmp
 	echo "exten => s,1,Answer()" >>				$WORKDIR/macros.tmp

-	# Workaround to fix no ringback issue for incoming SIP calls
+        # Workaround to fix no ringback issue for incoming SIP calls
 	echo "exten => s,n,Playback(silence/1)" >>		$WORKDIR/macros.tmp

 	echo "exten => s,n,Queue($1,R)" >>			$WORKDIR/macros.tmp
@@ -1128,13 +1127,13 @@ configure_cdr()

 	echo "cdr_syslog: $cdr_syslog"

-	if [ -z "$cdr_syslog" ] ; then
+        if [ -z "$cdr_syslog" ] ; then
 	    cdr_syslog='0'
 	fi

 	# Enable/disable CDR logging in syslog
 	if [ "$cdr_syslog" == "1" ] ; then
-	    cp $TMPL_CDR_SYSLOG			$WORKDIR/cdr_syslog.conf
+            cp $TMPL_CDR_SYSLOG		        $WORKDIR/cdr_syslog.conf
 	fi
 }

@@ -1189,28 +1188,27 @@ configure_call_filters()
 	echo "exten => s,n(not-foreign),Set(FOREIGN=0)" >>	$WORKDIR/macros.tmp
 	echo "" >>						$WORKDIR/macros.tmp

-	# Get special rate numbers from /etc/asterisk/special_rate_nr.cfg
-	if [ -f $SPECRATECFG ]; then
-		while read line
-		do
-		    i=0
-		    for v in $(echo $line | tr ";" "\n")
-			do
-				if [ "$i" -eq "0" -a "$v" != "$country" ] ; then
-					continue 2
-				fi
-				if [ "$i" -eq "1" ] ; then
-					srn=$v
-				fi
-				i=$((i+1))
-			done

-			if [ -n "$srn"  ] ; then
-				# Special rate numbers found
-				break
+	# Get special rate numbers from /etc/asterisk/special_rate_nr.cfg
+	while read line
+	do
+	    i=0
+	    for v in $(echo $line | tr ";" "\n")
+		do
+			if [ "$i" -eq "0" -a "$v" != "$country" ] ; then
+				continue 2
 			fi
-		done < $SPECRATECFG
-	fi
+			if [ "$i" -eq "1" ] ; then
+				srn=$v
+			fi
+			i=$((i+1))
+		done
+
+		if [ -n "$srn"  ] ; then
+			# Special rate numbers found
+			break
+		fi
+	done < "/etc/asterisk/special_rate_nr.cfg"

 	echo "Found special rate numbers: $srn"

@@ -1329,8 +1327,8 @@ get_call_filter()
 	macro="NoOp()"
 	
 	if ! [ "x$direction" != "xincoming" -o "x$direction" != "xoutgoing" ] ; then
-		echo $macro
-	fi
+                echo $macro
+        fi

 	local call_filter enabled
 	config_get call_filter $provider call_filter "call_filter0"
@@ -1355,20 +1353,20 @@ configure_opening_hours_profile()
 	local section cfgtype
 	[ -z "$CONFIG_SECTIONS" ] && return 0
 	for section in ${CONFIG_SECTIONS}; do
-		config_get cfgtype "$section" TYPE
-		[ -n "timespan" -a "x$cfgtype" != "xtimespan" ] && continue
-		local owner
+	        config_get cfgtype "$section" TYPE
+	        [ -n "timespan" -a "x$cfgtype" != "xtimespan" ] && continue
+	        local owner
 	
-		config_get owner $section owner
-		if [ "$owner" == "$1" ] ; then
-			local tr dow dom months
-			config_get tr $section time_range
-			config_get dow $section days_of_week
-			config_get dom $section days_of_month
-			config_get months $section months
+	        config_get owner $section owner
+	        if [ "$owner" == "$1" ] ; then
+	                local tr dow dom months
+	                config_get tr $section time_range
+	                config_get dow $section days_of_week
+	                config_get dom $section days_of_month
+	                config_get months $section months
 	
-			echo "exten => s,n,GotoIfTime($tr,$dow,$dom,$months,?$label)" >> $WORKDIR/macros.tmp
-		fi
+	                echo "exten => s,n,GotoIfTime($tr,$dow,$dom,$months,?$label)" >> $WORKDIR/macros.tmp
+	        fi
 	done
 	if [ "$invert" == "0" ] ; then
 		echo "exten => s,n,Goto(closed)" >>		$WORKDIR/macros.tmp
@@ -1643,7 +1641,7 @@ configure_extensions_provider()
 	local call_ivr call_queue extension
 	echo "exten => $user,n,Set(__TRANSFER_CONTEXT=\${CHANNEL(peername)}-transfer)" >>	$tmp

-	# replace prefix '+' with '00'
+        # replace prefix '+' with '00'
 	echo "exten => $user,n,GotoIf($[\"\${CALLERID(NUM):0:1}\" = \"+\"]?rewrite:norewrite)" >>	$tmp
 	echo "exten => $user,n(rewrite),Set(CALLERID(num)=\"00\${CALLERID(num):1}\"))" >>		$tmp
 	echo "exten => $user,n(norewrite),NoOp()">>							$tmp
@@ -1706,7 +1704,7 @@ configure_brcm_line_extension()
 		echo "Configuring local extension $extension"

 		config_get cbbs_enabled "features" cbbs_enabled
-		# load cbbs settings if enabled
+		# load cbbs settings if enabled                                                                                                                                             
 		cbbs_key=""
 		cbbs_maxretry="0"
 		cbbs_retrytime="0"
@@ -1723,7 +1721,7 @@ configure_brcm_line_extension()
 		sed -i "s/|LINE|/$line/g"			$WORKDIR/extensions_local_line.tmp
 		sed -i "s/|TIMEOUT|/$(get_voicemail_timeout)/g"	$WORKDIR/extensions_local_line.tmp

-		#cbbs settings
+		#cbbs settings                                                                                                                                                              
 		sed -i "s/|CBBS_KEY|/$(escape_sed_substitution $cbbs_key)/"	$WORKDIR/extensions_local_line.tmp
 		sed -i "s/|MAX_RETRIES|/$cbbs_maxretry/"      			$WORKDIR/extensions_local_line.tmp
 		sed -i "s/|RETRYTIME|/$cbbs_retrytime/"				$WORKDIR/extensions_local_line.tmp
@@ -2000,8 +1998,8 @@ configure_conference()
 	echo "exten => $extension,n(enterno),Read(confno,,5)"			>> $WORKDIR/extensions_local.tmp
 	
 	for section in ${CONFIG_SECTIONS}; do
-		config_get cfgtype "$section" TYPE
-		[ "x$cfgtype" != "xconference_room" ] && continue
+                config_get cfgtype "$section" TYPE
+                [ "x$cfgtype" != "xconference_room" ] && continue

 		local name id enabled
 		config_get name $section name
@@ -2013,7 +2011,7 @@ configure_conference()
 		echo "Enabling conference room $id"
 		echo "exten => $extension,n,GotoIf($[\"\${confno}\"=\"$id\"]?enterconf)"	>> $WORKDIR/extensions_local.tmp
 		echo "conf => $id"								>> $WORKDIR/meetme.tmp
-	done
+        done

 	echo "exten => $extension,n,Playback(conf-invalid)"			>> $WORKDIR/extensions_local.tmp
 	echo "exten => $extension,n,Goto(enterno)"				>> $WORKDIR/extensions_local.tmp
@@ -2283,13 +2281,11 @@ reload_service() {
 	# if there is a registered account
 	ubus call led.voice1 set '{"state":"off"}'

-	asterisk -rx "config reload $ASTERISKDIR/sip.conf"
-	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
 	asterisk -rx "brcm reload"
 }

 service_triggers() {
-	procd_add_reload_trigger voice_client
+        procd_add_reload_trigger voice_client
 }