Ticket#460: Update get and operate command in uspd

Description:
 - First draft of the changes

Test Done:
 - Below ubus call tested
   ubus call usp get '{"path":"Device.WiFi.SSID.[BSSID==\"00:22:07:6D:5E:DD\"].SSID"}'
   ubus call usp get '{"path":"Device.IP.Interface.*.IPv4Address.*.IPAddress"}'
   ubus call usp get '{"path":"Device.WiFi.AccessPoint.[SSIDReference+BSSID==\"00:22:07:6D:5E:DD\"].SSID"}'
   ubus call usp set '{"path":"Device.WiFi.AccessPoint.[SSIDReference+BSSID==\"00:22:07:6D:5E:D\"].SSID", "value":"Test-2G"}'

Not Covered:
 - Operate command
 - Alias based addressing
 - Searching with List of References

ated/Makefile

@@ -1,15 +1,8 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+# Copyright (C) 2016 inteno
 #
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
@@ -24,13 +17,9 @@ PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

bashdb/Makefile

@@ -13,9 +13,6 @@ PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)

bbf/Config_bbfdm.in

@@ -1,27 +0,0 @@
-if PACKAGE_libbbfdm
-
-config BBF_VENDOR_EXTENSION
-	bool "Enable Vendor Extension"
-	default y
-
-config BBF_VENDOR_LIST
-	string "Vendor List"
-	default "iopsys"
-
-config BBF_VENDOR_PREFIX
-	string "Vendor Prefix"
-	default "X_IOPSYS_EU_"
-
-config BBF_TR181
-	bool "Enable TR-181 Data Model Support"
-	default y
-
-config BBF_TR104
-	bool "Enable TR-104 Data Model Support"
-	default y
-
-config BBF_TR143
-	bool "Enable TR-143 Data Model Support"
-	default y
-
-endif

bbf/Makefile

@@ -1,132 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libbbfdm
-PKG_VERSION:=4.5.9
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=0e101a4c48e6a27f3f0a71eab434d8590bc0560a
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=LGPL-2.1
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libbbf_api
-  SECTION:=libs
-  CATEGORY:=Libraries
-  SUBMENU:=BBF
-  TITLE:=Library for libbbfdm API
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-endef
-
-define Package/libbbfdm
-  SECTION:=libs
-  CATEGORY:=Libraries
-  SUBMENU:=BBF
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libmbedtls +libcurl
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbf_api/description
- Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
-endef
-
-define Package/libbbfdm/description
- Library contains the data model tree. It includes TR181, TR104 and TR143 data models
-endef
-
-USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
-ifneq ($(USE_LOCAL),)
-define Build/Prepare
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror \
-
-ifeq ($(CONFIG_BBF_TR181),y)
-CONFIGURE_ARGS += \
-	--enable-tr181
-endif
-
-ifeq ($(CONFIG_BBF_TR104),y)
-CONFIGURE_ARGS += \
-	--enable-tr104
-endif
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CONFIGURE_ARGS += \
-	--enable-tr143
-endif
-
-ifeq ($(CONFIG_PACKAGE_libopenssl),y)
-CONFIGURE_ARGS += \
-	--enable-libopenssl
-endif
-
-ifeq ($(CONFIG_PACKAGE_libmbedtls),y)
-CONFIGURE_ARGS += \
-	--enable-libmbedtls
-endif
-
-ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CONFIGURE_ARGS += \
-	--enable-vendor-extension
-
-CONFIGURE_ARGS += \
-	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)" \
-	BBF_VENDOR_PREFIX="$(CONFIG_BBF_VENDOR_PREFIX)"
-
-endif ##CONFIG_BBF_VENDOR_EXTENSION
-
-define Package/libbbf_api/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
-endef
-
-define Package/libbbfdm/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(CP) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-endef
-
-define Package/libbbfdm/prerm
-	#!/bin/sh
-	rm -rf /etc/bbfdm/*
-	exit 0
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(CP) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libbbf_api))
-$(eval $(call BuildPackage,libbbfdm))

bbk_cli/Makefile

@@ -1,42 +0,0 @@
-#
-# Copright (C) 2018 The Internet Foundation In Sweden
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbk_cli
-PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bbk_cli
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +libstdcpp
-	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
-endef
-
-define Package/bbk_cli/description
-	To measure connection speed in an environment that is missing a web browser, 
-	for example, in a server, you can use our command line interface bbk_cli, 
-	which is available for some of the most common operating systems.
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
-endef
-
-define Package/bbk_cli/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
-endef
-
-$(eval $(call BuildPackage,bbk_cli))

bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch

@@ -1,25 +0,0 @@
-diff --git a/src/framework/engine.h b/src/framework/engine.h
-index 57a48ad..9e1bc36 100644
---- a/src/framework/engine.h
-+++ b/src/framework/engine.h
-@@ -10,6 +10,7 @@
- #include <map>
- #include <vector>
- #include <string>
-+#include <sys/select.h>
- 
- #include "logger.h"
- 
-diff --git a/src/framework/mk.inc b/src/framework/mk.inc
-index 793e211..13275be 100644
---- a/src/framework/mk.inc
-+++ b/src/framework/mk.inc
-@@ -7,7 +7,7 @@ OS:=$(shell uname)
- CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
- 
- ifeq ($(OS),Linux)
--CXX = g++
-+CXX = $(CROSS_COMPILE)g++
- endif
- 
- ifeq ($(OS),Darwin)

bootchart2/Makefile

@@ -18,9 +18,6 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/bootchart2

bulkdata/Makefile

@@ -1,50 +0,0 @@
-#
-# Copyright (C) 2020 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulkdata
-PKG_VERSION:=1.0.1
-
-PKG_SOURCE_VERSION:=e4f39d1bf4678fc05b9d02e81b194c70719909e4
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm +libbbf_api
-endef
-
-define Package/$(PKG_NAME)/description
-	BBF BulkData Collection
-endef
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/files/etc/config/bulkdata

@@ -1,43 +0,0 @@
-
-config bulkdata 'bulkdata'
-	option enable '0'
-	#Log levels: Critical=0, Warning=1, Notice=2, Info=3, Debug=4
-	option log_level '3'
-
-config profile
-	option profile_id '1'
-	option enable '0'
-	option name ''
-	option nbre_of_retained_failed_reports '0'
-	option protocol 'http'
-	option encoding_type ''
-	option reporting_interval '86400'
-	option time_reference '0'
-	option csv_encoding_field_separator ','
-	option csv_encoding_row_separator '
'
-	option csv_encoding_escape_character '"'
-	option csv_encoding_report_format 'column'
-	option csv_encoding_row_time_stamp 'unix'
-	option json_encoding_report_format 'objecthierarchy'
-	option json_encoding_report_time_stamp 'unix'
-	option http_url ''
-	option http_username ''
-	option http_password ''
-	option http_compression 'none'
-	option http_method 'post'
-	option http_use_date_header '1'
-	option http_retry_enable '0'
-	option http_retry_minimum_wait_interval '5'
-	option http_retry_interval_multiplier '2000'
-	option http_persist_across_reboot '0'
-
-config profile_parameter
-	option profile_id '1'
-	option name ''
-	option reference ''
-
-config profile_http_request_uri_parameter
-	option profile_id '1'
-	option name ''
-	option reference ''
-

bulkdata/files/etc/init.d/bulkdatad

@@ -1,34 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Bulkdata Software
-# Copyright (C) 2020 iopsys Software Solutions AB
-# Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
-
-START=99
-STOP=10
-
-USE_PROCD=1
-PROG="/usr/sbin/bulkdatad"
-
-start_service() {
-	local bulkdata_enable=`uci -q get bulkdata.bulkdata.enable`
-	if [ "$bulkdata_enable" = "1" ]; then
-		procd_open_instance
-		procd_set_param command "$PROG"
-		procd_set_param respawn "3" "7" "0"
-		procd_close_instance
-	fi
-}
-
-boot() {
-	start
-}
-
-reload_service() {
-	stop
-	start 
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger bulkdata
-}

bulut/Makefile

@@ -1,38 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulut
-PKG_VERSION:=0.2
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
-PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bulut
-	CATEGORY:=Utilities
-	DEPENDS:=
-	TITLE:=bulut
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include
-
-define Package/bulut/description
-	obuspa keys
-endef
-
-define Package/bulut/install
-	$(CP)  $(PKG_BUILD_DIR)/files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,bulut))

catv/Makefile

@@ -1,19 +1,9 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/catv

catv/files/etc/init.d/catv

@@ -1,4 +1,7 @@
 #!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2015 inteno.org
+#
 
 START=71
 USE_PROCD=1

crashlog/Makefile

@@ -1,18 +1,9 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=crashlog
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
 
 include $(INCLUDE_DIR)/package.mk
 

crashlog/files/etc/init.d/crashlog

@@ -4,15 +4,16 @@ START=99
 
 send_log()
 {
-	nr=$(db get hw.board.serial_number)
-	hw=$(db get hw.board.model_name)
-	fam=$(db get hw.board.iopVerFam)
+	nr=$(db get hw.board.serialNumber)
+	hw=$(db get hw.board.hardware)
+	hwv=$(db get hw.board.hardwareVersion)
+	bid=$(db get hw.board.boardId)
 	sw=$(db get hw.board.iopVersion)
 	server=$(/sbin/uci get system.crashlog.server)
 
 	while true
 	do
-	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${bid}_${hwv}_${hw}_${sw}_${nr}
 	    if [ $? == 0 ]
 	    then
 	       break;
@@ -27,7 +28,7 @@ fill_in_default()
     /sbin/uci add system log
     /sbin/uci rename system.@log[-1]=crashlog
     /sbin/uci set system.crashlog.enable=no
-    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
+    /sbin/uci set system.crashlog.server="crash.inteno.se"
     /sbin/uci commit
 }
 

crashlog/files/sbin/logcore

@@ -20,7 +20,7 @@ fill_in_default()
     /sbin/uci add system log
     /sbin/uci rename system.@log[-1]=corelog
     /sbin/uci set system.corelog.enable=no
-    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
+    /sbin/uci set system.corelog.server="crash.inteno.se"
     /sbin/uci commit
 }
 
@@ -50,11 +50,12 @@ cat >$TMP_CORE
 # more memory to work with. normally this would do nothing.
 cat >/dev/null
 
-nr=$(db get hw.board.serial_number)
-hw=$(db get hw.board.model_name)
-fam=$(hw.board.iopVerFam)
+nr=$(db get hw.board.serialNumber)
+hw=$(db get hw.board.hardware)
+hwv=$(db get hw.board.hardwareVersion)
+bid=$(db get hw.board.boardId)
 sw=$(db get hw.board.iopVersion)
 
-scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${bid}_${hwv}_${hw}_${sw}_${nr}
 rm $TMP_CORE
 

crashlog/readme

@@ -24,7 +24,7 @@ What we need is the public key for the clients.
 For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
 
 ----------
-ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@iopsys
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@inteno
 ----------
 
 The public key should be just one line. Add that line to the 

crun/Makefile

@@ -1,81 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=crun
-PKG_VERSION:=0.20
-PKG_RELEASE:=$(AUTORELEASE)
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/containers/crun.git
-PKG_SOURCE_DATE:=2021-06-07
-PKG_SOURCE_VERSION:=8d6a8b5ab80461cfed19f020a36584af13c32038
-PKG_MIRROR_HASH:=9ca1f0e530b33ce8820bd03329eb6731c5050d6e7f35bd2463d9a81cc00382e0
-
-PKG_BUILD_DEPENDS:=argp-standalone
-PKG_BUILD_PARALLEL:=1
-PKG_FIXUP:=autoreconf
-PKG_INSTALL:=1
-
-PKG_MAINTAINER:=Oskari Rauta <oskari.rauta@gmail.com>
-PKG_LICENSE:=GPL-2.0-or-later
-PKG_LICENSE_FILES:=COPYING
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/crun
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=crun
-  URL:=https://github.com/containers/crun
-  DEPENDS:=@!arc +libseccomp +libcap
-endef
-
-define Package/crun/description
-  A fast and low-memory footprint OCI Container Runtime fully written in C.
-endef
-
-CONFIGURE_ARGS+= \
-	--disable-systemd \
-	--enable-embedded-yajl \
-	--enable-caps \
-	--enable-dl \
-	--enable-seccomp \
-	--enable-bpf
-
-define Build/Prepare
-	$(call Build/Prepare/Default)
-	$(SED) '/#include <git-version.h>/d' $(PKG_BUILD_DIR)/src/crun.c
-endef
-
-define Build/Configure
-	$(call Build/Configure/Default)
-
-	$(SED) '/#define PACKAGE \"/d' $(PKG_BUILD_DIR)/config.h
-	$(SED) '/#define VERSION \"/d' $(PKG_BUILD_DIR)/config.h
-	$(SED) '/#define GIT_VERSION \"/d' $(PKG_BUILD_DIR)/config.h
-	$(SED) '/#define PACKAGE_BUGREPORT \"/d' $(PKG_BUILD_DIR)/config.h
-	$(SED) '/#define PACKAGE_NAME \"/d' $(PKG_BUILD_DIR)/config.h
-	$(SED) '/#define PACKAGE_STRING \"/d' $(PKG_BUILD_DIR)/config.h
-	$(SED) '/#define PACKAGE_TARNAME \"/d' $(PKG_BUILD_DIR)/config.h
-	$(SED) '/#define PACKAGE_VERSION \"/d' $(PKG_BUILD_DIR)/config.h
-
-	echo "#define PACKAGE \"$(PKG_NAME)\"" >> $(PKG_BUILD_DIR)/config.h
-	echo "#define VERSION \"$(PKG_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
-	echo "#define PACKAGE_NAME \"$(PKG_NAME)\"" >> $(PKG_BUILD_DIR)/config.h
-	echo "#define PACKAGE_VERSION \"$(PKG_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
-	echo "#define PACKAGE_STRING \"$(PKG_NAME) $(PKG_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
-	echo "#define PACKAGE_TARNAME \"$(PKG_NAME)\"" >> $(PKG_BUILD_DIR)/config.h
-	echo "#define PACKAGE_BUGREPORT \"bugs@openwrt.org\"" >> $(PKG_BUILD_DIR)/config.h
-	echo "#define GIT_VERSION \"$(PKG_SOURCE_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
-endef
-
-define Package/crun/install
-	$(INSTALL_DIR) $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/crun $(1)/usr/bin/
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libcrun.* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,crun))

dectmngr/Makefile

@@ -1,62 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dectmngr
-PKG_RELEASE:=3
-PKG_VERSION:=3.1.12
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3de3dd2c45a0e95d875880c084f468a2f4010e2b
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
- 	TITLE:=DECT Manager
- 	DEPENDS:= +libubox +ubus
-endef
-
-define Package/$(PKG_NAME)/description
-	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-MAKE_FLAGS += \
-	CFLAGS+="-Wall"
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/dectmngr
-	$(CP) ./files/etc/* $(1)/etc/
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dectmngr

@@ -1,2 +0,0 @@
-config dectmngr 'general'
-	option log_dect_cmbs '0'

dectmngr/files/etc/init.d/dectmngr

@@ -1,86 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-source /lib/functions/uci-defaults.sh
-
-START=70
-STOP=12
-
-USE_PROCD=1
-NAME=dectmngr
-PROG=/usr/sbin/dectmngr
-LOG_PATH=/var/log/dectmngr
-DB_PATH=/etc/dect
-
-# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
-stop_and_wait_dectmngr() {
-	pidof $NAME && killall -q $NAME
-
-	pidof $NAME && sleep 2 # wait for the process to stop gracefully
-	while pidof $NAME; do
-		killall -q -9 $NAME 
-		sleep 1
-	done
-}
-
-start_service() {
-	local opt_ext=
-	local rfpi=
-	local model_id=
-
-	test $(db get hw.board.hasDect) = "0" && return
-
-	echo 1 > /sys/class/gpio/gpio14/value
-
-	rfpi=$(db -q get hw.board.dect_rfpi)
-	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
-
-	# model_id=$(db -q get hw.board.dect_model_id)
-	# Setting model_id to 0x010203 is a workaround to reduce synchronisation time of some handset
-	# TODO: remove below line and uncomment the line above to get value from db when the problem is solved
-	model_id="01.02.03"
-	[ -n "$model_id" -a ${#model_id} -eq 8 ] && opt_ext="$opt_ext -model $model_id"
-
-	config_load dectmngr
-	config_get_bool log_dect_cmbs general log_dect_cmbs 0
-
-	procd_open_instance
-	if [ $log_dect_cmbs -eq 0 ]; then
-		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command $PROG -comname ttyH0 $opt_ext
-		rm -f $LOG_PATH/*
-	else
-		echo "Starting dectmngr with cmbs logging enabled"
-		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
-	fi
-	procd_set_param respawn 6 2 3
-	procd_set_param term_timeout 20
-	procd_set_param triggers asterisk
-	procd_close_instance
-}
-
-stop_service() {
-	test $(db get hw.board.hasDect) = "0" && return
-
-	echo 0 > /sys/class/gpio/gpio14/value
-	stop_and_wait_dectmngr
-}
-
-reload_service() {
-	stop_and_wait_dectmngr
-	start
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger asterisk
-}
-
-boot() {
-	echo 14 > /sys/class/gpio/export
-	echo out > /sys/class/gpio/gpio14/direction
-
-	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
-	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
-	start
-}
-

dectmngr2/Makefile

@@ -0,0 +1,56 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.2.0
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=0c029ed2486342e7e7687631b702d5c743f3c41a
+PKG_NAME:=dectmngr2
+
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr2
+  CATEGORY:=Utilities
+  TITLE:=Dectmngr2
+  URL:=
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus +libpicoevent
+endef
+
+define Package/dectmngr2/description
+	Dectmngr2
+endef
+
+
+define Package/dectmngr2/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/uci-defaults/
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
+	$(CP) ./files/dect.config $(1)/etc/config/dect
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+endef
+
+$(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+
+# Workaround for product DG400 which has an
+# incorrect value in nvram from factory.
+
+if [ -e "/proc/nvram/BoardId" ]; then
+	boardid=$(cat /proc/nvram/BoardId)
+	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
+
+	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
+		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
+
+		db -q batch <<-EOT
+			set hw.board.hasDect=1
+			commit hw.board
+		EOT
+	fi
+fi
+
+
+exit 0
+

dslmngr/Makefile

@@ -8,25 +8,23 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.1.2
+PKG_VERSION:=1.0.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=82d7208b3182a9cd1e6aec70872bf30f2fa8c82b
+PKG_SOURCE_VERSION:=be5b0d0c0a1c2abd335aaf19f01f63284d8cc285
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+  TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
@@ -44,7 +42,7 @@ define Package/dslmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +easy-soc-libs
 endef
 
 define Package/dslmngr/description
@@ -55,7 +53,6 @@ endef
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/xdsl \
 	-D_GNU_SOURCE
 
 MAKE_FLAGS += \

easy-qos/Makefile

@@ -1,29 +1,19 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-qos
-PKG_VERSION:=1.1
+PKG_VERSION:=1.0
 PKG_RELEASE:=0
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm)
 endef
 
 define Package/easy-qos/description
-	This package contains Easy QoS utility
+	This package contains Easy QoS utitie
 endef
 
 define Build/Prepare
@@ -39,11 +29,7 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
-else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -1,301 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-RULE_LIST="/tmp/easy_qos_rule.list"
-CLIENT_LIST="/tmp/easy_qos_class_client.list"
-BRIDGE_INTF=""
-
-[ -f /etc/profile.d/intel.sh ] && {
-	. /etc/profile.d/intel.sh
-	sh /etc/profile.d/intel.sh
-}
-
-log() {
-	echo "${@}"|logger -t easy_qos_class -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-exec_class_log() {
-	${@} |grep -i successful
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-		return 1
-	fi
-	return 0
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 8;;
-		"low")
-			echo 7;;
-		"besteffort")
-			echo 6;;
-		"normal")
-			echo 5;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 3;;
-		"high")
-			echo 2;;
-		"highest")
-			echo 1;;
-	esac
-}
-
-get_mark() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo "0x41/0x3df";;
-		"low")
-			echo "0x82/0x3df";;
-		"besteffort")
-			echo "0xc3/0x3df";;
-		"normal")
-			echo "0x104/0x3df";;
-		"video")
-			echo "0x145/0x3df";;
-		"medium")
-			echo "0x186/0x3df";;
-		"high")
-			echo "0x1c7/0x3df";;
-		"highest")
-			echo "0x208/0x3df";;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_ip_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j EXTMARK --set-mark ${mark}";
-	if [ "${proto}" != "icmp" ]; then
-		if [ -n "${ports}" ]; then
-			cmd="--match multiport --dports ${ports} ${cmd}";
-		fi
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd}
-}
-
-is_lan_bridge() {
-	local _section=$1
-	local _type
-	local _is_lan
-
-	config_get _type "$section" "type"
-	config_get _is_lan "$section" "is_lan"
-
-	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
-		BRIDGE_INTF="br-${_section}"
-	fi
-}
-
-get_bridge_interface() {
-	config_load network
-	config_foreach is_lan_bridge interface
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	# execute the delete rules written onto a file then delete the file
-	[ -f ${RULE_LIST} ] || return 0
-
-	while read line
-	do
-		log "Deleting old classification rules"
-		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
-	done <${RULE_LIST}
-
-	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
-	done
-	sync
-
-	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
-}
-
-# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
-create_rule() {
-	local proto=$1; shift
-	local mac_addr=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-	# Rule name is uniqe, so we take hash of all the input as rule_name
-	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
-
-	cmd="-j mark --mark ${mark}";
-
-	if [ "${mac_addr}" != "none" ]; then
-		cmd="--smac ${mac_addr} ${cmd}";
-	fi
-
-	if [ "${proto}" != "icmp" ]; then
-		if [ "${ports}" != "none" ]; then
-			IFS=","
-			for port in ${ports};
-			do
-				cmd="--dport ${port}:${port} ${cmd}";
-			done
-			IFS=' '
-		fi
-	fi
-	if [ "${proto}" != "none" ]; then
-		cmd="-p ${proto} $cmd"
-	fi
-	cmd="-i ${BRIDGE_INTF} $cmd"
-	cmd="-A ${rule_name} $cmd"
-
-	# Store the rule_names for cleanup on reload
-	exec_class_log classcfg ${cmd}
-	[ $? -eq 0 ] && \
-		echo ${rule_name}  >> ${RULE_LIST}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num port_list ip ipmark
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-	ipmark=$(get_mark ${priority})
-	ip=$(get_ipaddress ${macaddr})
-
-	if [ -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${macaddr} ${prio_num} ${port_list}
-			create_rule udp ${macaddr} ${prio_num} ${port_list}
-			if [ -n "${ip}" ]; then
-				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
-				create_ip_rule udp ${ip} ${ipmark} ${port_list}
-			fi
-		else
-			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
-			if [ -n "${ip}" ]; then
-				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	get_bridge_interface
-	map_client_entries
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
-	reload_service
-	log "Easy QoS class installed"
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos" "network"
-}
-

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -102,7 +102,7 @@ manage_rule() {
 	prio_num=$(get_priority ${priority})
 	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
 		for p in ${port}; do
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+			if [ "${protocol}" == "none" ]; then
 				create_rule tcp ${macaddr} ${prio_num} ${p}
 				create_rule udp ${macaddr} ${prio_num} ${p}
 			else
@@ -111,7 +111,7 @@ manage_rule() {
 		done
 		# Create rule for all ports if port is not mentioned in uci
 		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+			if [ "${protocol}" == "none" ]; then
 				create_rule tcp ${macaddr} ${prio_num}
 				create_rule udp ${macaddr} ${prio_num}
 			else

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -85,7 +85,7 @@ get_ipaddress() {
 	json_get_keys keys
 
 	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
+	json_select "${1//:/_}"
 	json_get_var ip ip
 
 	echo "$ip"
@@ -103,18 +103,18 @@ validate_rule_section()
 
 # Clear existing rules before applying new rules
 clear_existing_rules() {
-	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	local rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
 	while [ -n "${rule}" ]; do
 		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+		rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
 	done
 }
 
 check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	iptables -t mangle -C OUTPUT ${@} 2>/dev/null
 	# Create rule if not exists
 	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
+		exec_log iptables -t mangle -A OUTPUT ${@}
 	else
 		log "Rule exists for ${@}"
 	fi
@@ -158,7 +158,7 @@ manage_rule() {
 	port_list=$(echo ${port}|sed 's/ /,/g')
 
 	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+		if [ "${proto}" == "none" ]; then
 			create_rule tcp ${ip} ${prio_num} ${port_list}
 			create_rule udp ${ip} ${prio_num} ${port_list}
 		else

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -4,5 +4,7 @@ uci -q batch <<-EOT
         set firewall.easyqos=include
         set firewall.easyqos.path=/etc/firewall.easyqos
         set firewall.easyqos.reload=1
+	uci del_list firewall.easyqos._access_w="root"
+	uci add_list firewall.easyqos._access_w="root"
         commit firewall
 EOT

easy-soc-events/Makefile

@@ -1,110 +0,0 @@
-# All rights reserved.
-# See LICENSE for more information.
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=easy-soc-events
-PKG_VERSION:=1.1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/easy-soc-events.git
-PKG_SOURCE_VERSION:=5c582b0165b574dc94e4865f82e0bb91fa561754
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-PKG_BUILD_DIR:=$(BUILD_DIR)/easy-soc-events-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-
-include $(INCLUDE_DIR)/package.mk
-
--include $(TOPDIR)/.config
-
-ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
-  LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
-  LINUX_VERSION := 4.1.52
-  LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
-  BCM_BS_PROFILE := $(patsubst "%",%,$(CONFIG_BCM_KERNEL_PROFILE))
-  FS_DIR := $(BUILD_DIR)/bcmkernel/bcm963xx/targets/$(BCM_BS_PROFILE)/fs
-  MODULES_SUBDIR:=lib/modules/$(LINUX_VERSION)/extra
-  TARGET_MODULES_DIR:=/$(MODULES_SUBDIR)
-endif
-
-
-define KernelPackage/easy-soc-events/default
-  SUBMENU:=Other modules
-endef
-
-define KernelPackage/easy-soc-events
-  $(KernelPackage/easy-soc-events/default)
-  TITLE:=Helper module for netlink event notification
-  FILES:=$(PKG_BUILD_DIR)/easyevent.ko
-  AUTOLOAD:=$(call AutoLoad,11,easyevent)
-endef
-
-define KernelPackage/easy-soc-events-test
-  $(KernelPackage/easy-soc-events/default)
-  TITLE:=Test module for event notification through easyevent
-  DEPENDS+=+kmod-easy-soc-events
-  FILES+=$(PKG_BUILD_DIR)/test/testevent.ko
-endef
-
-
-define KernelPackage/easy-soc-events/description
-  This is a helper module to generate and pass netlink events from
-  kernel to user applications.
-endef
-
-#NOSTDINC_FLAGS :=
-
-ifdef CONFIG_PACKAGE_kmod-easy-soc-events
-  PKG_MAKE_FLAGS += CONFIG_EASYEVENT=y
-endif
-
-LINUXINCLUDE += \
-		-I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/$(LINUX_UAPI_DIR) \
-		-Iarch/$(LINUX_KARCH)/include \
-		-Iarch/$(LINUX_KARCH)/include/generated \
-		-Iarch/$(LINUX_KARCH)/include/generated/$(LINUX_UAPI_DIR) \
-		-I$(LINUX_DIR)/include/generated/uapi \
-		-Iarch/$(LINUX_KARCH)/include/$(LINUX_UAPI_DIR) \
-		-include ./include/linux/kconfig.h
-
-
-define Build/Prepare
-	$(call Build/Prepare/Default)
-endef
-
-define Build/Compile
-	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
-		$(KERNEL_MAKE_FLAGS) V=1 \
-		$(PKG_MAKE_FLAGS) \
-		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
-		LINUXINCLUDE="$(LINUXINCLUDE)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		modules
-endef
-
-
-ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
-define KernelPackage/easy-soc-events/install-extra
-	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
-endef
-endif
-
-define KernelPackage/easy-soc-events/install
-	$(call KernelPackage/easy-soc-events/install-extra)
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(STAGING_DIR)/usr/include
-	#$(INSTALL_DIR) $(STAGING_DIR)/usr/include/linux
-	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(STAGING_DIR)/usr/include/linux/
-	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(LINUX_DIR)/include/linux/
-	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(STAGING_DIR)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(STAGING_DIR)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(LINUX_DIR)/include/generated/uapi
-	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(LINUX_DIR)/include/generated/uapi
-endef
-
-$(eval $(call KernelPackage,easy-soc-events-test))
-$(eval $(call KernelPackage,easy-soc-events))

easy-soc-libs/Config.in

@@ -1,5 +1,23 @@
-# libeasy configuration
+if (PACKAGE_libwifi || PACKAGE_libdsl || PACKAGE_libethernet)
+menu "configurations"
 
-config LIBWIFI_USE_CTRL_IFACE
-	bool "Use UNIX sockets"
+config IOP_LLA_LIBS_DEBUG
+	bool "Enable debugging support"
 	default n
+
+config LIBWIFI_DEBUG
+	depends on PACKAGE_libwifi
+	bool "Enable wifi debugging"
+	default n
+
+config LIBDSL_DEBUG
+	depends on PACKAGE_libdsl
+	bool "Enable xdsl debugging"
+	default n
+
+config LIBDSL_TEST
+	depends on PACKAGE_libdsl
+	bool "Libdsl test program"
+	default n
+endmenu
+endif

easy-soc-libs/Makefile

@@ -1,81 +1,89 @@
 #
-# Copyright (C) 2020 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
+# Copyright (C) 2018 Iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.3.2
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a1eedd39d2a1444045fc2a772fd62795cd6d2017
+PKG_SOURCE_VERSION:=6bd703870262eca9ccbd8c4937c41fe842828ae3
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/easy-soc-libs
   SECTION:=libs
   CATEGORY:=Libraries
-  TITLE:=IOPSYS Easy SoC libraries
-  SUBMENU:=IOPSYS Easy SoC libraries
+  TITLE:=IOPSYS easy SoC libraries
+  SUBMENU:=IOPSYS easy SoC libraries
   DEPENDS:=+libopenssl
   MENU:=1
 endef
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+define Package/libwifi/config
+  source "$(SOURCE)/Config.in"
+endef
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+TARGET_intel_mips:libnl +TARGET_intel_mips:libnl-route
+endef
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+TARGET_iopsys_ramips:swconfig
+endef
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
   TARGET_PLATFORM=BROADCOM
-  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
   TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
-  TARGET_PLATFORM=TEST
-  TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
-  TARGET_PLATFORM=TEST
-  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+  TARGET_CFLAGS +=-DIOPSYS_MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
+  TARGET_CFLAGS +=-DIOPSYS_INTEL
 else
-  $(info Unexpected CONFIG_TARGET, use default MAC80211)
-  TARGET_PLATFORM=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+  $(info Unexpected CONFIG_TARGET)
 endif
 
 export TARGET_PLATFORM
 
+ifdef CONFIG_IOP_LLA_LIBS_DEBUG
+  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
+endif
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= XDSL library (libdsl)
+  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi
+endef
+
 subdirs := \
-	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
 	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
 	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
-	$(if $(CONFIG_PACKAGE_libqos),libqos)
-
-EASY_SOC_LIBS := \
-	libeasy \
-	libwifi \
-	libdsl \
-	libethernet \
-	libqos
-
-ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
-  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
-endif
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet)
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
@@ -95,36 +103,57 @@ define Build/Prepare
 endef
 endif
 
-include easy.mk
-include wifi.mk
-include dsl.mk
-include ethernet.mk
-include qos.mk
-
-ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
-	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
-define Build/Compile/rebuild
-	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
-	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
-		rm -f $(PKG_BUILD_DIR)/.config_*)
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
 endef
-endif
 
-STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
 
 define Build/Compile
-	$(Build/Compile/rebuild)
-	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
 	$(call Build/Compile/Default)
-	$(foreach dir,$(subdirs),$(call Build/Compile/$(dir)))
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endif
 endef
 
 define Build/InstallDev
 	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
 endef
 
-define Package/easy-soc-libs/install
-	:
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
 endef
 
-$(eval $(foreach e,$(EASY_SOC_LIBS),$(call BuildPackage,$(e))))
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
+endef
+
+$(eval $(call BuildPackage,libwifi))
+$(eval $(call BuildPackage,libdsl))
+$(eval $(call BuildPackage,libethernet))

easy-soc-libs/dsl.mk

@@ -1,44 +0,0 @@
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= xDSL library (libdsl)
-endef
-
-define Package/libdsl/config
-  if PACKAGE_libdsl
-	  config LIBDSL_DEBUG
-		depends on PACKAGE_libdsl
-		bool "Enable dsl debugging"
-		default n
-
-	  config LIBDSL_TEST
-		depends on PACKAGE_libdsl
-		bool "Enable dsl test program"
-		default n
-
-  endif
-endef
-
-define Build/InstallDev/libdsl
-	$(INSTALL_DIR) $(1)/usr/include/xdsl
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-define Build/Compile/libdsl
-	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
-endef
-endif
-
-define Package/libdsl/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
-endif
-endef

easy-soc-libs/easy.mk

@@ -1,28 +0,0 @@
-
-
-define Package/libeasy
-  $(call Package/easy-soc-libs)
-  TITLE:= Common helper functions library (libeasy)
-  DEPENDS+=+libnl +libnl-route
-endef
-
-define Package/libeasy/config
-    source "$(SOURCE)/Config.in"
-endef
-
-define Build/InstallDev/libeasy
-	$(INSTALL_DIR) $(1)/usr/include/easy
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
-endef
-
-define Package/libeasy/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/ethernet.mk

@@ -1,27 +0,0 @@
-
-define Package/libethernet
-  $(call Package/easy-soc-libs)
-  TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
-endef
-
-define Package/libethernet/config
-  config LIBETHERNET_DEBUG
-	depends on PACKAGE_libethernet
-	bool "Enable ethernet debugging"
-	default n
-
-endef
-
-define Build/InstallDev/libethernet
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
-endef
-
-define Package/libethernet/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/qos.mk

@@ -1,27 +0,0 @@
-
-define Package/libqos
-  $(call Package/easy-soc-libs)
-  TITLE:= QoS library (libqos)
-  DEPENDS+=+libnl +libnl-route +libeasy
-endef
-
-define Package/libqos/config
-  config LIBQOS_DEBUG
-	depends on PACKAGE_libqos
-	bool "Enable qos debugging"
-	default n
-
-endef
-
-define Build/InstallDev/libqos
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
-endef
-
-define Package/libqos/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/wifi.mk

@@ -1,29 +0,0 @@
-
-define Package/libwifi
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_brcm63xx_arm:bcmkernel
-endef
-
-define Package/libwifi/config
-  if PACKAGE_libdsl
-	  config LIBWIFI_DEBUG
-		depends on PACKAGE_libwifi
-		bool "Enable wifi debugging"
-		default n
-
-  endif
-endef
-
-define Build/InstallDev/libwifi
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
-endef
-
-define Package/libwifi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
-endef
-

endptmngr/Makefile

@@ -1,37 +1,35 @@
 #
-# Copyright (C) 2018 IOPSYS Software Solutions AB
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
+
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=endptmngr
-PKG_VERSION:=0.5
+PKG_RELEASE:=1
+PKG_VERSION:=0.2
+PKG_SOURCE_VERSION:=44e2472e8c08bef01fab27e8e908d5672f7af136
 
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
+
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=endptmngr-open
+else
+PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/endptmngr
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=debfc47348d6e1fc1c8b126ad50a7f5f8db3e19d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
+PKG_NAME:=endptmngr
 endif
 
-PKG_LICENSE:=MIT
-PKG_LICENSE_FILES:=LICENSE
-
+RSTRIP:=true
 export BUILD_DIR
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_PARALLEL:=1
 
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
-export CONFIG_BRCM_SDK_VER_504002
-export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -41,24 +39,27 @@ endef
 
 define Package/endptmngr
   CATEGORY:=Utilities
-  TITLE:=Broadcom Voice Endpoint Manager
+  TITLE:=Brcmslic
   URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
+  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
 endef
 
 define Package/endptmngr/description
 	endptmngr
 endef
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+
+define Build/Compile
 endef
+
 endif
 
+
 define Package/endptmngr/install
-	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
 endef
 

endptmngr/files/etc/init.d/endptmngr

@@ -1,25 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=68
-STOP=12
-
-USE_PROCD=1
-NAME=endptmngr
-
-start_service() {
-	procd_open_instance
-	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
-	procd_set_param command $NAME
-	procd_set_param respawn "5" "0" "3"
-	procd_set_param nice -12
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger asterisk 
-}

ethmngr/Makefile

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2020 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ethmngr
-PKG_VERSION:=2.0.1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ethmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Ethernet status and configration utility
-  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
-endef
-
-define Package/ethmngr/description
- This package can be used to configure and provide status about
- the ethernet interfaces and ports through UBUS.
- It uses APIs from the libethernet.so library.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-define Package/ethmngr/install
-	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,ethmngr))

fatrace/Makefile

@@ -1,7 +1,7 @@
 #
 # Copyright (C) 2006-2010 OpenWrt.org
 #
-# This is free software, licensed under the GNU General Public License v3.
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPL-3.0
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

fdtextract/Makefile

@@ -1,51 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fdtextract
-PKG_RELEASE:=1
-PKG_VERSION:=1.0
-
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=45575262de7a9690bcb2c760f35e2c74e88e1176
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
-	TITLE:=fdtextract
-	DEPENDS:= +libfdt
-endef
-
-define Package/$(PKG_NAME)/description
-	Command to extract sub images from FIT images.
-endef
-
-MAKE_FLAGS += \
-	CFLAGS+="-Wall"
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/fdtextract
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

fping/Makefile

@@ -0,0 +1,54 @@
+#
+# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fping
+PKG_VERSION:=4.0
+PKG_RELEASE:=2
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://fping.org/dist/
+PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
+
+PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
+PKG_LICENSE:=BSD-4-Clause
+PKG_LICENSE_FILES:=COPYING
+
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fping
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
+  URL:=http://fping.org/
+endef
+
+
+define Package/fping/description
+	fping is a ping like program which uses the Internet Control Message Protocol
+	(ICMP) echo request to determine if a target host is responding.  fping
+	differs from ping in that you can specify any number of targets on the command
+	line, or specify a file containing the lists of targets to ping.  Instead of
+	sending to one target until it times out or replies, fping will send out a
+	ping packet and move on to the next target in a round-robin fashion.
+endef
+
+CONFIGURE_ARGS+= \
+	--enable-ipv4 \
+	--enable-ipv6
+
+TARGET_CFLAGS += -std=gnu99
+
+define Package/fping/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,fping))

gigaset-elements/.gitignore

@@ -0,0 +1,3 @@
+
+git-src
+

gigaset-elements/Makefile

@@ -0,0 +1,65 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=gigaset-elements
+
+PKG_VERSION:=2.4.2
+# PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_GIGASET_ELEMENTS_SRC_URL ?= git@dev.iopsys.eu:3rdparty/gigaset-elements.git
+PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
+
+PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
+
+
+PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+######################################################
+
+define Package/gigaset-elements
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libjson-c +libcurl +libpthread
+  TITLE:=Gigaset elements
+endef
+
+######################################################
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) all
+endef
+
+
+
+define Package/gigaset-elements/install
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
+endef
+
+
+
+define Package/gigaset-elements/preinst
+#!/bin/sh
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
+endef
+
+
+define Package/gigaset-elements/postrm
+#!/bin/sh
+rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
+rm -rf /usr/share/gigaset
+endef
+
+
+######################################################
+
+$(eval $(call BuildPackage,gigaset-elements))
+

gryphon-led-module/Makefile

@@ -28,7 +28,7 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  PKG_LICENSE:=GPLv2
+  PKG_LICENSE:=Genexis
   PKG_LICENSE_URL:=
 endef
 

gryphon-led-module/src/main.c

@@ -46,10 +46,9 @@ static ssize_t get_led_color(struct device *dev,
 	/* [ln] todo: dummy implementation */
 	int len;
 
-	len = scnprintf(buf, PAGE_SIZE, "%d\n", 123);
+	len = sprintf(buf, "%d\n", 123);
 	if (len <= 0) {
 		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
 	}
 
 	return len;
@@ -100,69 +99,8 @@ static ssize_t set_led_color(struct device *dev,
 }
 static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
 
-static ssize_t get_led_brightness(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%x\n", sk9822->led_brightness);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
-	}
-
-	return len;
-}
-
-/**
- * @brief Set LED brightness
- * @retval count number of bytes written
- * @retval -EINVAL if the message is not a valid hexadecimal number
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_brightness(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-	unsigned long val = SK9822_DEFAULT_BRIGHTNESS;
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	if (kstrtoul(buf, 16, &val)) {
-		return -EINVAL;
-	}
-
-	if(val > SK9822_DEFAULT_BRIGHTNESS) {
-		val = SK9822_DEFAULT_BRIGHTNESS;
-	}
-
-	sk9822->led_brightness = (uint8_t)val;
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_brightness, S_IRUGO | S_IWUSR, get_led_brightness, set_led_brightness);
-
-
 static struct attribute *sk9822_dev_attrs[] = {
 	 &dev_attr_led_color.attr,
-	 &dev_attr_led_brightness.attr,
 	 NULL
 };
 
@@ -191,8 +129,6 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_warn(&pdev->dev, "Could not read led-count property\n");
 		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
-	} else {
-		printk(KERN_INFO "Got led count: %u\n", leds->led_count);
 	}
 
 	leds->led_colors = devm_kzalloc(&pdev->dev,
@@ -204,7 +140,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, leds);
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
 	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
 #elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
 	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
@@ -212,12 +148,6 @@ static int canyon_led_probe(struct platform_device *pdev)
 	dev_warn(&pdev->dev, "Kernel version Not supported\n");
 	exit(1);
 #endif
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		leds->clock_gpio = NULL;
-		return PTR_ERR(leds->clock_gpio);
-	}
 
 	gpiod_direction_output(leds->clock_gpio, 1);
 	if (IS_ERR(leds->clock_gpio)) {
@@ -230,7 +160,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 		gpiod_set_value(leds->clock_gpio, 0);
 	}
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
 	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
 #elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
 	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
@@ -238,12 +168,6 @@ static int canyon_led_probe(struct platform_device *pdev)
 	dev_warn(&pdev->dev, "Kernel version Not supported\n");
 	exit(1);
 #endif
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		leds->data_gpio = NULL;
-		return PTR_ERR(leds->data_gpio);
-	}
 
 	gpiod_direction_output(leds->data_gpio, 1);
 	if (IS_ERR(leds->data_gpio)) {
@@ -268,9 +192,9 @@ static int canyon_led_probe(struct platform_device *pdev)
 	sk9822_set_color_str(leds, "00FF00");
 	sk9822_update(leds);
 	msleep(200);
+#endif
 	sk9822_set_color_str(leds, "000000");
 	sk9822_update(leds);
-#endif
 
 	printk(KERN_INFO "canyon led successfully probed\n");
 

ice-client/Config.in

@@ -0,0 +1,4 @@
+
+config ICE_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

ice-client/files/ice-client.uci_default

@@ -0,0 +1,74 @@
+#!/bin/sh
+
+grep -rq "^ice:" /etc/passwd || {
+	adduser -D -H -s /bin/false ice
+}
+
+uci -q delete passwords.ice
+uci -q set passwords.ice=usertype
+uci -q set passwords.ice.password="\$WPAKEY"
+uci -q del_list passwords.ice._access_w=root
+uci -q add_list passwords.ice._access_w=root
+uci -q del_list passwords.ice._access_r=root
+uci -q add_list passwords.ice._access_r=root
+uci -q commit passwords
+
+uci show rpcd | grep username=.*ice.* >/dev/null || {
+cat >> /etc/config/rpcd << EOF
+
+config login
+	option username 'ice'
+	option password '\$p\$ice'
+	list _access_w 'none'
+	list write 'user-user'
+	list write 'juci-broadcom-dsl'
+	list write 'juci-broadcom-dsl-admin'
+	list write 'juci-broadcom-ethernet'
+	list write 'juci-broadcom-iptv'
+	list write 'juci-broadcom-vlan'
+	list write 'juci-broadcom-vlan-admin'
+	list write 'juci-wireless'
+	list write 'juci-wireless-admin'
+	list write 'juci-catv'
+	list write 'juci-ddns'
+	list write 'juci-diagnostics'
+	list write 'juci-dnsmasq-dhcp'
+	list write 'juci-dropbear'
+	list write 'juci-ethernet'
+	list write 'juci-event'
+	list write 'juci-firewall-fw3'
+	list write 'juci-iconnect'
+	list write 'juci-igmpinfo'
+	list write 'juci-inteno-backup'
+	list write 'juci-inteno-multiwan'
+	list write 'juci-inteno-provisioning'
+	list write 'juci-inteno-qos'
+	list write 'juci-inteno-voice-client'
+	list write 'juci-minidlna'
+	list write 'juci-mod-status'
+	list write 'juci-mod-system'
+	list write 'juci-natalie-dect'
+	list write 'juci-netmode'
+	list write 'juci-network-netifd'
+	list write 'juci-owsd'
+	list write 'juci-printer'
+	list write 'juci-realtime-graphs'
+	list write 'juci-samba'
+	list write 'juci-sfp'
+	list write 'juci-snmpd'
+	list write 'juci-sysupgrade'
+	list write 'juci-uhttpd'
+	list write 'juci-upnp'
+	list write 'juci-usb'
+	list write 'core'
+	list write 'unauthenticated'
+
+EOF
+}
+
+uci -q del_list dhcp.@domain[0].name="inteno.lan"
+uci -q add_list dhcp.@domain[0].name="inteno.lan"
+uci -q commit dhcp
+
+exit 0
+

icgroupd/Makefile

@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2016 Inteno Broadband AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=icgroupd
+PKG_VERSION:=1.0
+PKG_RELEASE:=0
+
+PKG_LICENSE:=GPL-2.0
+PKG_LICENSE_FILES:=
+
+PKG_MAINTAINER:=Inteno Broadband AB
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/icgroupd
+  SECTION:=base
+  CATEGORY:=Base system
+  TITLE:=Inteno cgroup daemon
+  DEPENDS:=+uci +busybox
+endef
+
+define Package/icgroupd/description
+	This package contains Intenos cgroup daemon and associated
+	configuration and startup scripts.
+endef
+
+define Build/Compile
+	true
+endef
+
+define Package/icgroupd/install
+	$(INSTALL_DIR) $(1)/sbin $(1)/etc/init.d $(1)/etc/config
+
+	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
+	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
+	$(INSTALL_BIN) ./files/cgroupd $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,icgroupd))
+

icgroupd/files/cgroupd

@@ -0,0 +1,76 @@
+#!/bin/sh
+
+CGBASEDIR=$1
+CGCONFIG=$2
+[ -n "$CGBASEDIR" -a -n "$CGCONFIG" ] || exit 1
+
+[ -r /lib/functions.sh ] || exit 1
+. /lib/functions.sh
+
+CGPROCMAP=/tmp/cgprocmap
+CGPERIOD=3s
+
+DBGLOG=/tmp/cgroupd.log
+DEBUG=0
+
+
+add_to_procmap () {
+	local name_grp=$1
+	local name grp
+
+	name=$(echo $name_grp |awk -F= '{print $1}')
+	grp=$(echo $name_grp |awk -F= '{print $2}')
+
+	echo "($name) $grp" >> $CGPROCMAP
+}
+
+# Read configuration file and create process:group look-up table
+# in /tmp file
+read_config () {
+	local enab
+
+	config_load $CGCONFIG
+
+	config_get enab cgroups enabled "1"
+	[ $enab -eq 0 ] && exit 1
+
+	config_get CGDEFGROUP cgroups defgroup "_undef_"
+	[ "$CGDEFGROUP" == "_undef_" ] && exit 1
+	[ "$DEBUG" == "1" ] && echo "default $CGDEFGROUP" >> $DBGLOG
+
+	echo -n '' > $CGPROCMAP
+	config_list_foreach procmap procmap add_to_procmap
+	[ "$DEBUG" == "1" ] && cat $CGPROCMAP >> $DBGLOG
+}
+
+# Move all process except init from cgroup root to cgroups according
+# to /tmp look-up table
+move_wild_procs () {
+	local wild_procs=$(cat $CGBASEDIR/cgroup.procs)
+	local pid name grp
+
+	for pid in $wild_procs; do
+
+		[ $pid -eq 1 ] && continue
+		if [ -d /proc/$pid ]; then
+
+			name=$(awk '{print $2}' /proc/$pid/stat)
+			grp=$(awk "\$1==\"$name\" {print \$2}" $CGPROCMAP)
+
+			[ "$grp" == "." ] && continue
+			[ -n "$grp" ] || grp=$CGDEFGROUP
+
+			[ "$DEBUG" == "1" ] && \
+			    echo "Moving proc $pid $name to $grp" >> $DBGLOG
+			echo $pid > $CGBASEDIR/$grp/cgroup.procs
+		fi
+	done
+}
+
+
+[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
+read_config
+while true; do
+	move_wild_procs
+	sleep $CGPERIOD
+done

icgroupd/files/cgroups.config

@@ -0,0 +1,48 @@
+config cgroups cgroups
+	option enabled 1
+	option defgroup iopsys/normal
+
+config cgroup _root_
+#	list option cpu.rt_runtime_us=50000
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=40000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_normal
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=10000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_high
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=30000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=10000
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_normal
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=2500
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_high
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=7500
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config procmap procmap
+	list procmap kthreadd=.
+	list procmap minidlna=3prt/normal
+

icgroupd/files/cgroups.init

@@ -0,0 +1,93 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+USE_PROCD=1
+PROCD_DEBUG=1
+NAME=cgroupd
+
+CGBASEDIR=/sys/fs/cgroup
+CGCONFIG="cgroups"
+
+DBGLOG=/tmp/cginit.log
+DEBUG=0
+
+
+cgroupinit_set_knob_value () {
+	local knob_val=$1
+	local dir=$2
+	local knob val
+
+	knob=$(echo $knob_val |awk -F= '{print $1}')
+	val=$(echo $knob_val |awk -F= '{print $2}')
+	/bin/echo $val > $CGBASEDIR/$dir/$knob
+	[ "$DEBUG" == "1" ] && \
+	    echo "/bin/echo $val > $CGBASEDIR/$dir/$knob (ret=$?)" >> $DBGLOG
+}
+
+cgroupinit_create_group () {
+	local cgrp=$1
+	local dir
+
+	[ "$DEBUG" == "1" ] && echo "Create group $cgrp:" >> $DBGLOG
+	if [ "$cgrp" == "_root_" ]; then
+		dir=.
+	else
+		dir=$(echo $cgrp |tr '_' '/')
+
+		if [ ! -d $CGBASEDIR/$dir ]; then
+			mkdir $CGBASEDIR/$dir
+			[ "$DEBUG" == "1" ] && \
+			    echo "mkdir $CGBASEDIR/$dir (ret=$?)" >> $DBGLOG
+		fi
+	fi
+
+	config_list_foreach $cgrp option cgroupinit_set_knob_value $dir
+}
+
+cgroupinit_configure_cgroups () {
+	local enab defgrp
+
+	[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
+	config_load $CGCONFIG
+
+	config_get enab cgroups enabled "1"
+	[ $enab -eq 0 ] && return 1
+
+	config_get defgrp cgroups defgroup "_undef_"
+	[ "$defgrp" == "_undef_" ] && return 1
+
+	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
+		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
+		[ $? -eq 0 ] || return 1
+	fi
+
+	config_foreach cgroupinit_create_group cgroup
+	return 0
+}
+
+start_service () {
+	cgroupinit_configure_cgroups
+	[ $? -eq 0 ] || return
+
+	procd_open_instance
+	procd_set_param command /sbin/cgroupd $CGBASEDIR $CGCONFIG
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service () {
+	local cgdir procs prc
+
+	for cgdir in $(find $CGBASEDIR -type d -mindepth 1 -depth); do
+		procs=$(cat $cgdir/cgroup.procs)
+		for prc in $procs; do
+			echo $prc > $CGBASEDIR/cgroup.procs
+		done
+		rmdir $cgdir
+	done
+}
+
+service_triggers() {
+        procd_add_reload_trigger $CGCONFIG
+}
+

icwmp/Config_cwmp.in

@@ -1,4 +1,8 @@
-if PACKAGE_icwmp
+if PACKAGE_icwmp-curl || PACKAGE_icwmp-zstream
+
+config CWMP_SCRIPTS_FULL
+	bool "Install all icwmp scripts"
+	default y
 
 choice
 	prompt "Select ACS sever"
@@ -15,9 +19,17 @@ config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y
 
+config XMPP_ENABLE
+	bool "enable xmpp feature"
+	default n
+
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
 
+config LIBDATAMODEL_VENDOR_PREFIX
+    string "Vendor Prefix"
+    default "X_IOPSYS_EU_"
+    
 endif
 

icwmp/Config_datamodel.in

@@ -0,0 +1,7 @@
+if PACKAGE_libdatamodel
+
+config UPNP_TR064
+	bool "Compile with tr064 features"
+	default n
+
+endif

icwmp/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2020 iopsys Software Solutions AB
+# Copyright (C) 2012 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,18 +8,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=8.1.5-2021-09-03
+PKG_VERSION:=4.0-2019-04-05
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=393e67dec2a1a924423761e73fb376209b871a10
+PKG_SOURCE_VERSION:=f7e8cee5bcc578cc9bb9307e31d0c057676a377c
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
 
 PKG_CONFIG_DEPENDS:= \
 	CONFIG_CWMP_ACS_MULTI \
@@ -27,28 +24,73 @@ PKG_CONFIG_DEPENDS:= \
 	CONFIG_CWMP_DEBUG \
 	CONFIG_CWMP_DEVEL_DEBUG
 
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
 
 CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl
+define Package/libdatamodel
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
 endef
 
-define Package/$(PKG_NAME)/description
+define Package/icwmp_stun
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 stun Client
+	DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json
+endef
+
+define Package/icwmp_xmpp
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 xmpp feature
+	DEPENDS:=+libuci +libubox +libexpat +libstrophe
+endef
+
+define Package/icwmp_udpechoserver
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 udpechoserver feature
+	DEPENDS:=+libuci
+endef
+
+define Package/icwmp/Default
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=CWMP client
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace +libdatamodel
+endef
+
+define Package/icwmp/description
  A free client implementation of CWMP (TR-069) protocol
 endef
 
-define Package/$(PKG_NAME)/config
+define Package/icwmp-curl
+  $(call Package/icwmp/Default)
+  TITLE+= (using libcurl)
+  DEPENDS+= +libcurl
+  VARIANT:=curl
+endef
+
+define Package/icwmp-zstream
+  $(call Package/icwmp/Default)
+  TITLE+= (using libzstream)
+  DEPENDS+= +libzstream
+  VARIANT:=zstream
+endef
+
+define Package/icwmp-zstream/config
 	source "$(SOURCE)/Config_cwmp.in"
 endef
 
+define Package/libdatamodel/config
+	source "$(SOURCE)/Config_datamodel.in"
+endef
+
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
 define Build/Prepare
@@ -56,6 +98,12 @@ define Build/Prepare
 endef
 endif
 
+ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+TARGET_CFLAGS += -DEX400
+endif
+
+TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBDATAMODEL_VENDOR_PREFIX)\\\"
+
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
 
@@ -75,6 +123,27 @@ CONFIGURE_ARGS += \
 	--with-uci-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
+	
+ifeq ($(CONFIG_UPNP_TR064),y)
+CONFIGURE_ARGS += \
+	--enable-upnptr064
+endif
+	
+ifeq ($(CONFIG_XMPP_ENABLE),y)
+CONFIGURE_ARGS += \
+	--enable-xmpp
+endif
+	
+ifeq ($(BUILD_VARIANT),zstream)
+CONFIGURE_ARGS += \
+	--enable-http=zstream \
+	--with-zstream-include-path=$(STAGING_DIR)/usr/include
+endif
+
+ifeq ($(BUILD_VARIANT),curl)
+CONFIGURE_ARGS += \
+	--enable-http=curl
+endif
 
 ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
 CONFIGURE_ARGS += \
@@ -96,15 +165,74 @@ CONFIGURE_ARGS += \
 	--enable-devel
 endif
 
-define Package/$(PKG_NAME)/install
+define Package/libdatamodel/install
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib/
+endef
+
+define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/icwmpd $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
+ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
+	$(INSTALL_DIR) $(1)/usr/share/icwmp
+	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
+	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
+endif
 	$(CP) ./files/* $(1)/
 endef
 
-define Package/$(PKG_NAME)/postinst
+define Package/icwmp_stun/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_stund $(1)/usr/sbin/icwmp_stund
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_stund $(1)/etc/init.d/icwmp_stund
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_stun $(1)/etc/config
+endef
+
+define Package/icwmp_xmpp/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_xmppd $(1)/usr/sbin/icwmp_xmppd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
+endef
+
+define Package/icwmp_udpechoserver/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
+	$(CP) $(PKG_BUILD_DIR)/dm/*.h $(1)/usr/include/libdatamodel
+	$(CP) $(PKG_BUILD_DIR)/dm/dmtree/common/root.h $(1)/usr/include/libdatamodel
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.a $(1)/lib
+endef
+
+
+define Package/icwmp-$(BUILD_VARIANT)/postinst
 	#!/bin/sh
+	echo "$(CWMP_BKP_FILE)" >> $${IPKG_INSTROOT}/etc/sysupgrade.conf
 	if [ -z "$${IPKG_INSTROOT}" ]; then
 		echo "Enabling rc.d symlink for icwmpd"
 		/etc/init.d/icwmpd enable
@@ -112,7 +240,7 @@ define Package/$(PKG_NAME)/postinst
 	exit 0
 endef
 
-define Package/$(PKG_NAME)/prerm
+define Package/icwmp-$(BUILD_VARIANT)/prerm
 	#!/bin/sh
 	if [ -z "$${IPKG_INSTROOT}" ]; then
 		echo "Disabling rc.d symlink for icwmpd"
@@ -121,4 +249,10 @@ define Package/$(PKG_NAME)/prerm
 	exit 0
 endef
 
-$(eval $(call BuildPackage,$(PKG_NAME)))
+
+$(eval $(call BuildPackage,icwmp-curl))
+$(eval $(call BuildPackage,libdatamodel))
+$(eval $(call BuildPackage,icwmp_stun))
+$(eval $(call BuildPackage,icwmp_xmpp))
+$(eval $(call BuildPackage,icwmp_udpechoserver))
+$(eval $(call BuildPackage,icwmp-zstream))

icwmp/README

@@ -0,0 +1,136 @@
+1)Build
+    Requirements<74>:
+	librairies:
+	- libuci.so
+	- libexpat.so
+	- libcurl.so
+	- libpthread.so
+	- libopenssl.so
+	- libz.so
+	- libcrypto.so
+	the librairies should be present in the "staging_dir/target-i386_uClibc-0.9.30.1/usr/lib/"  or "staging_dir/toolchain-mips_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib"
+	
+	header files and folders:
+	- expat.h
+	- expat_external.h
+	- uci.h
+	- uci_config.h
+	- zlib.h
+	- curl folder
+	- openssl folder
+	the header files and folders should be present in the staging_dir/target-i386_uClibc-0.9.30.1/usr/include/ or staging_dir/toolchain-i386_gcc-4.1.2_uClibc-0.9.30.1/usr/include/
+
+
+if a librairie doesn't exist:
+ 	a- run make menuconfig and select the librarie
+	b- build the librarie package
+
+2) Build
+
+this software is composed of 3 packages:
+- icwmp package:  contains icwmpd daemon
+- cwmp lib package: contains cwmplib and contains cwmp_value_change binary. They could be used by other user space applications in order to notify the icwmp daemon when paramter changes
+- cwmp kernel package: contains cwmp kernel module. This module could be used by other kernel modules to notify the icwmpd daemon  when kernel parameter changes
+
+The three packages should be selected in the make menu config in order to get the three packages compiled.
+To compile the three packages: $ make package/cwmpd/compile 
+
+3) OpenWRT settings
+in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script file:
+ uci_set_state provisioning iup tr069url "$url"
+ uci_set_state provisioning iup provisioningcode "$provisioningcode"
+
+4) Run
+    Requirements:
+	- libuci package should be installed
+	- libexpat package should be installed
+	- libcurl package should be installed
+	- libpthread package should be installed
+	- libopenssl package should be installed
+	- libz package should be installed
+	- libcrypto package should be installed
+    
+    Configure the acs url in the /etc/config/icwmp
+    and then start the cwmpd service: /etc/init.d/icwmpd start
+    for the help: /etc/init.d/icwmpd
+
+5) Value Change
+
+5.1) value change for user space applications (using the libcwmp)
+
+Before using the libcwmp, we should check that the libcwmp package is selected in "make menu config". and we should check that the package is compiled.
+The libcwmp should be installed uin the OpenWRT firmware
+
+example of using libcwmp
+in myapplication.c
+
+#...
+#include <cwmp_lib.h>
+#...
+
+int anyfunction ()
+{
+   .....
+   /* parameter change here  */
+   /* so we inform the icwmp: */
+   lib_api_cwmp_value_change_call (3, "InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress","lan2","3");
+   .....
+/*
+Description of lib_api_cwmp_value_change_call input parameters
+ parameter 1 : is the number of input string in the function lib_api_cwmp_value_change_call
+ parameter 2 : is the parameter path
+ parameter 3 : is the first correspondence related to the first indice
+ parameter 4 : is the second correspondence related to the second indice
+   .
+   .
+   .
+ parameter n : is the (n-2) correspondence related to the (n-2) indice
+*/
+
+}
+
+5.2) value change for user space applications (using the cwmp_value_change CLI)
+
+Before using the libcwmp, we should check that the libcwmp package is selected in "make menu config". and we should check that the package is compiled.
+The libcwmp should be installed uin the OpenWRT firmware
+
+in OpenWRT:
+
+root@OpenWrt:~# cwmp_value_change InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress "lan2" "3"
+
+in this case the command will force cwmp client to send a notification to the ACS (if and only if the parameter path as configured as active or as passive parameter using the setAttributeParameter method)
+
+5.3) value change for kernel space modules
+Before using the cwmp kernel module for value change, we should check that the kernel module package is selected in "make menu config". and we should check that the package is compiled.
+The kernel module should be installed uin the OpenWRT firmware and should be insert before all other kernel modules
+
+example of using cwmp kernel module
+in mykernelmodule.c
+
+#...
+#include <linux/cwmp_kernel.h>
+#...
+
+int anykernelfunction ()
+{
+   .....
+   /* parameter change here  */
+   /* so we inform the cwmp: */
+   kernel_api_cwmp_value_change_call (3, "InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress","lan2","3");
+   .....
+/*
+Description of lib_api_cwmp_value_change_call input parameters
+ parameter 1 : is the number of input string in the function lib_api_cwmp_value_change_call
+ parameter 2 : is the parameter path
+ parameter 3 : is the first correspondence related to the first indice
+ parameter 4 : is the second correspondence related to the second indice
+   .
+   .
+   .
+ parameter n : is the (n-2) correspondence related to the (n-2) indice
+*/
+
+}
+
+
+

icwmp/files/etc/config/cwmp

@@ -1,46 +0,0 @@
-config acs 'acs'
-	option url ''
-	option userid '' #$OUI-$SER
-	option passwd 'iopsys'
-	option periodic_inform_enable 'true'
-	option periodic_inform_interval '1800'
-	option periodic_inform_time '0001-01-01T00:00:00Z'
-	option ParameterKey ''
-	option dhcp_discovery 'enable'
-	# compression possible configs: GZIP, Deflate, Disabled
-	option compression 'Disabled'
-	#­ possible configs interval :[1:65535]
-	option retry_min_wait_interval '5'
-	#­ possible configs interval :[1000:65535]
-	option retry_interval_multiplier '2000'
-	option https_ssl_capath ''
-	option ipv6_enable '0'
-	option ip_version '4'
-
-config cpe 'cpe'
-	option interface 'eth0.1'
-	option default_wan_interface 'wan'
-	option log_to_console 'disable'
-	option log_to_file 'enable'
-	# log_severity: INFO (Default)	
-	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
-	option log_severity 'INFO'
-	option log_file_name '/var/log/icwmpd.log'
-	option log_max_size '102400'
-	option userid '' #$OUI-$SER
-	option passwd 'iopsys'
-	option port '7547'
-	option provisioning_code ''
-	option amd_version '5'
-	# compression possible configs: InstanceNumber, InstanceAlias
-	option instance_mode 'InstanceNumber'
-	option session_timeout '60'
-	option notification '1'
-	option exec_download '0'
-	option periodic_notify_enable '1'
-	option periodic_notify_interval '10'
-	
-config lwn 'lwn'
-	option enable '1'
-	option hostname ''
-	option port '0'

icwmp/files/etc/firewall.cwmp

@@ -1,21 +0,0 @@
-#created by the icwmp package 
-zone_name=""
-port=""
-if [ "$zone_name" = "" ]; then
-	exit 0
-elif [ "$zone_name" = "icwmp" ]; then
-	iptables -nL zone_icwmp_input 2> /dev/null
-	if [ $? != 0 ]; then
-		iptables -N zone_icwmp_input
-		iptables -t filter -A INPUT -j zone_icwmp_input
-		iptables -I zone_icwmp_input -p tcp --dport $port -j REJECT
-	else			
-		iptables -F zone_icwmp_input
-		iptables -I zone_icwmp_input -p tcp --dport $port -j REJECT
-	fi			
-else
-	iptables -F zone_icwmp_input 2> /dev/null
-	iptables -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
-	iptables -X zone_icwmp_input 2> /dev/null
-fi
-#iptables -I FW_ZONE -p tcp -s ACS_ADDRESS --dport PORT -j ACCEPT --comment "Open ACS port"

icwmp/files/etc/init.d/icwmpd

@@ -1,235 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2015-2019 iopsys Software Solutions AB
-
-. /lib/functions.sh
-include /lib/network
-. /usr/share/libubox/jshn.sh
-
-START=99
-STOP=10
-
-USE_PROCD=1
-PROG="/usr/sbin/icwmpd"
-
-EXTRA_HELP="	start	[GetRPCMethods] Start icwmpd service and send GetRPCMethods"
-
-log() {
-	echo "${@}"|logger -t cwmp.init -p info
-}
-
-validate_url() {
-	# SCHEMA_LIST: contain list of possible schemas that could be present in the acs url
-	# Example: SCHEMA_LIST="http https"
-	SCHEMA_LIST="http"
-
-	for schema in $SCHEMA_LIST;	do
-		dest=`echo $1 | sed 's/$schema:\/\///g' | cut -f1 -d \/ | cut -f1 -d:`
-		if [ "_$dest" != "_" ]; then
-			return 0
-		fi
-	done
-	return 1
-}
-
-get_acs_url() {
-	local default_acs="http://10.10.1.6:8000/openacs/acs"
-	local acs_dhcp_discovery="$(uci -q get cwmp.acs.dhcp_discovery)"
-	local url="$(uci -q get cwmp.acs.url)"
-	local dhcp_url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
-
-	if [ "$acs_dhcp_discovery" == "enable" -a -n "$dhcp_url" -o -z "$url" ]; then
-		url="$dhcp_url"
-		log "ACS URL from DHCP server: $url"
-		[ -n "$url" ] && uci -P /var/state -q set cwmp.acs.url="$url" || url="$default_acs"
-	elif [ -n "$url" ];then
-		url="$(uci -q get cwmp.acs.url)"
-		log "ACS URL from configuration: $url"
-	else
-		url="$default_acs"
-		log "Using default ACS URL: $url"
-		[ -n "$url" ] && uci -P /var/state -q set cwmp.acs.url="$url"
-	fi
-
-	validate_url "$url"
-	if [ "$?" != "0" ];then
-		echo "Invalid ACS URL: $url"
-		exit 1
-	fi
-}
-
-enable_dhcp_option43() {
-	local wan=$1
-	local discovery=0
-	case $2 in
-		enable|1) discovery=1 ;;
-	esac
-
-	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local enabled
-	local newreqopts=
-	local baseopts=
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local tropts="43"
-	local oldreqopts="$reqopts"
-	local ropt iopt
-	for ropt in $reqopts; do
-		case $ropt in
-			43) ;;
-			*) baseopts="$baseopts $ropt" ;;
-		esac
-	done
-	ropt=""
-	reqopts="$baseopts $tropts"
-	for ropt in $reqopts; do
-		case $ropt in
-			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
-			*) newreqopts="$newreqopts $ropt" ;;
-		esac
-	done
-	if [ $proto == "dhcp" ]; then
-		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		[ "$newreqopts" == "$oldreqopts" ] && return
-		uci -q set network.$wan.reqopts="$newreqopts"
-		uci commit network
-		ubus call network reload
-	fi
-	########################################################
-}
-
-wait_for_option43() {
-	local time=$1
-	local default_wan_interface dhcp_discovery url
-
-	config_get default_wan_interface cpe default_wan_interface "wan"
-	config_get dhcp_discovery acs dhcp_discovery "0"
-	config_get url acs url
-
-	enable_dhcp_option43 $default_wan_interface $dhcp_discovery
-
-	local tm=0
-
-	if [ "$dhcp_discovery" == "enable" -o "$dhcp_discovery" == "1" ]
-	then
-		log "Waiting for discovery of ACS URL from dhcp server ..."
-		while [ $tm -le $time ]
-		do
-			acs_url=`uci -P /var/state -q get cwmp.acs.dhcp_url`
-			if [ "$acs_url" != "" ]
-			then
-				break
-			else
-				sleep 1
-			fi
-			tm=$((tm+1))
-		done
-	fi
-}
-
-wait_for_resolvfile() {
-	local time=$1
-	local tm=1
-
-	local resolvfile="$(uci -q get dhcp.@dnsmasq[0].resolvfile)"
-	[ -n "$resolvfile" ] || return
-
-	while [ ! -f $resolvfile ]; do
-		sleep 1
-		[ $tm -ge $time ] && break
-		tm=$((tm+1))
-	done
-}
-
-set_wan_interface() {
-	local l3_device=""
-	local default_wan_interface=""
-
-	config_get default_wan_interface cpe default_wan_interface "wan"
-	json_load "$(ifstatus $default_wan_interface)"
-	json_get_var l3_device l3_device
-	if [ "$l3_device" != "" ];then
-		uci -q set cwmp.cpe.interface="$l3_device"
-		uci -q commit cwmp
-	fi
-}
-
-validate_acs_section()
-{
-	uci_validate_section cwmp acs "acs" \
-		'passwd:string' \
-		'periodic_inform_enable:bool' \
-		'periodic_inform_interval:uinteger' \
-		'periodic_inform_time:string' \
-		'url:string:http://192.168.1.1' \
-		'dhcp_discovery:or("enable", "disable")' \
-		'compression:or("GZIP","Deflate","Disabled")' \
-		'retry_min_wait_interval:range(1, 65535)' \
-		'retry_interval_multiplier:range(1000, 65535)' \
-		'https_ssl_capath:file' \
-		'ipv6_enable:bool'
-		
-}
-
-validate_cpe_section()
-{
-	uci_validate_section cwmp cpe "cpe" \
-		'interface:string' \
-		'default_wan_interface:string' \
-		'log_to_console:or("enable","disable")' \
-		'log_to_file:or("enable","disable")' \
-		'log_severity:or("EMERG", "ALERT", "CRITIC" ,"ERROR", "WARNING", "NOTICE", "INFO", "DEBUG")' \
-		'log_file_name:string' \
-		'log_max_size:uinteger' \
-		'userid:string' \
-		'passwd:string' \
-		'port:uinteger' \
-		'provisioning_code:string:""' \
-		'amd_version:range(1, 6)' \
-		'instance_mode:or("InstanceNumber","InstanceAlias")' \
-		'session_timeout:uinteger' \
-		'notification:bool' \
-		'exec_download:bool' \
-		'periodic_notify_enable:bool' \
-		'periodic_notify_interval:uinteger'		
-}
-
-start_service() {
-	config_load cwmp
-	set_wan_interface
-	wait_for_option43 20
-	get_acs_url
-
-	validate_acs_section || {
-		log "Validation of acs section failed"
-		return 1;
-	}
-	
-	validate_cpe_section || {
-		log "Validation of cpe section failed"
-		return 1;
-	}
-	
-	procd_open_instance icwmp
-	procd_set_param command "$PROG"
-	if [ "$1" = "GetRPCMethods" ]; then
-		procd_append_param command -g
-	fi
-	procd_append_param command -b
-	
-	procd_set_param respawn \
-		${respawn_threshold:-5} \
-		${respawn_timeout:-10} ${respawn_retry:-3}
-		
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_config_trigger "config.change" "cwmp"  /etc/init.d/icwmpd reload
-}
-

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -1,32 +0,0 @@
-# Copy defaults by the factory to the cwmp UCI user section.
-
-
-# Get factory base MAC.
-baseMac=$(db -q get hw.board.basemac)
-
-# Erase colon and space characters.
-baseMac=${baseMac//:/}
-baseMac=${baseMac// /}
-
-# Caseing and fixed length string.
-mac=$(printf "%12.12X" $((0x$baseMac)))
-
-# Get system serial number.
-serial=$(db -q get hw.board.serial_number)
-
-# Get userid values
-acs_userid=$(uci -q get cwmp.acs.userid)
-cpe_userid=$(uci -q get cwmp.cpe.userid)
-
-# Only set if they are empty
-if [ -z "$acs_userid" ]
-then
-    uci -q set cwmp.acs.userid="${mac:0:6}-${serial}"
-fi
-
-if [ -z "$cpe_userid" ]
-then
-    uci -q set cwmp.cpe.userid="${mac:0:6}-${serial}"
-fi
-
-# No need for commit here, it is done by uci_apply_defaults().

icwmp/files/etc/uci-defaults/90-cwmpfirewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.cwmp
-        set firewall.cwmp=include
-        set firewall.cwmp.path=/etc/firewall.cwmp
-        set firewall.cwmp.reload=1
-        commit firewall
-EOT
-
-exit 0
-

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -41,14 +41,4 @@ set_cwmp_reqopts() {
 	fi
 }
 
-regenerate_ssl_link(){
-	local cert_dir="/etc/ssl/certs"
-	local all_file=$(ls $cert_dir/*.pem)
-	for cfile in $all_file
-	do
-		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
-	done
-}
-
 set_cwmp_reqopts
-regenerate_ssl_link

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1 +0,0 @@
-/etc/icwmpd/.icwmpd_backup_session.xml

ieee1905/Config.in

@@ -1,10 +0,0 @@
-if (PACKAGE_ieee1905)
-
-menu "Configurations"
-
-config IEEE1905_EXTENSION_ALLOWED
-	bool "Allow plugins to extend 1905 CMDUs and/or TLVs"
-	default y
-
-endmenu
-endif

ieee1905/Makefile

@@ -1,129 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ieee1905
-PKG_VERSION:=3.3.6
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e224f6280173aa0e190f10d38aa0ae3714667c9b
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-
-define Package/ieee1905/Default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=IEEE-1905.1 stack
-endef
-
-define Package/ieee1905/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/libieee1905
-$(call Package/ieee1905/Default,$(1))
-  TITLE+= (library for CMDU and TLV handling)
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
-	   +libjson-c +libblobmsg-json
-endef
-
-define Package/ieee1905
-$(call Package/ieee1905/Default,$(1))
-  TITLE+= ieee1905d (daemon implementing 1905.1 and provides cli)
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
-	   +libjson-c +libblobmsg-json +libwifi +ubus +libpthread \
-	   +libnl-genl +libieee1905
-endef
-
-
-define Package/map-plugin
-$(call Package/ieee1905/Default,$(1))
-  TITLE:=Multi-AP (Easymesh) plugin
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/ieee1905/description
- This package provides IEEE Std 1905.1 stack.
-endef
-
-define Package/libieee1905/description
- This package provides library functions for IEEE Std 1905.1 stack.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-MAKE_PATH:=src
-
-
-define Package/ieee1905/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/ieee1905d $(1)/usr/sbin/
-endef
-
-define Package/libieee1905/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
-endef
-
-define Package/map-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-endef
-
-define Build/InstallDev/map-plugin
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map2.h $(1)/usr/include/map2.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-endef
-
-
-define Build/InstallDev/libieee1905
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/cmdu.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/1905_tlvs.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
-endef
-
-define Build/InstallDev
-	$(call Build/InstallDev/libieee1905,$(1),$(2))
-	$(call Build/InstallDev/map-plugin,$(1),$(2))
-endef
-
-
-$(eval $(call BuildPackage,ieee1905))
-$(eval $(call BuildPackage,libieee1905))
-$(eval $(call BuildPackage,map-plugin))

ieee1905/files/etc/config/ieee1905

@@ -1,22 +0,0 @@
-config ieee1905 'ieee1905'
-	option enabled '1'
-	option extension '1'
-	list extmodule 'map'
-	option registrar '2 5'
-
-config ap
-	option band '2'
-	option ssid 'TestSSID.2'
-	option encryption 'psk2'
-	option key '5555500000'
-
-config ap
-	option band '5'
-	option ssid 'TestSSID.5'
-	option encryption 'psk2'
-	option key '2222200000'
-
-config al-iface
-	option enabled 1
-	option ifname 'br-lan'
-	option type 'bridge'

ieee1905/files/etc/init.d/ieee1905

@@ -1,25 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=96
-STOP=21
-
-USE_PROCD=1
-
-start_service() {
-	procd_open_instance
-        procd_set_param command "/usr/sbin/ieee1905d"
-	procd_set_param respawn
-#	procd_set_param stdout 1
-#	procd_set_param stderr 1
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "ieee1905"
-}
-
-reload_service() {
-	stop
-	start
-}

ifbt/Makefile

@@ -0,0 +1,52 @@
+#
+# Copyright (C) 2018 iopsys Software Solutions AB
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ifbt
+PKG_VERSION:=0.1
+
+PKG_SOURCE_VERSION:=0286812ed8036dea758f904694dc416481fba64d
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+TARGET_PLATFORM:=-DIOPSYS_BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+TARGET_PLATFORM:=-DIOPSYS_BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+TARGET_PLATFORM:=-DIOPSYS_MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+TARGET_PLATFORM:=-DIOPSYS_INTEL
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+TARGET_PLATFORM:=-DIOPSYS_MEDIATEK
+else
+$(info (UNEXPECTED CONFIG TARGET))
+endif
+
+export TARGET_PLATFORM
+
+define Package/ifbt
+	CATEGORY:=Utilities
+	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c
+	TITLE:=Fast BSS Transition
+endef
+
+define Package/ifbt/description
+	ifbt is Iopsys application for fast BSS transition
+endef
+
+define Package/ifbt/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ifbt))

ifsi/Makefile

@@ -0,0 +1,39 @@
+#
+# Copyright (C) 2015 Inteno
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ifsi
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+define Package/ifsi
+  CATEGORY:=Utilities
+  DEPENDS:=+ubus +libubox
+  TITLE:=Inteno Functional Script Interface
+endef
+
+define Package/ifsi/description
+	Inteno Functional Script Interface
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+define Package/ifsi/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifsi $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ifsi))

ifsi/src/Makefile

@@ -0,0 +1,17 @@
+CC		= gcc
+CFLAGS		= -g -Wall
+LOCLIBS		= 
+LIBS		= -lubus -lubox -lblobmsg_json
+OBJS		= ifsi.o
+SRCS		= ifsi.c
+LIBSRCS		= 
+ISRCS		= 
+
+all: ifsi
+
+ifsi: ${OBJS}
+	${CC} ${LDFLAGS} ${LIBSRCS} -o ifsi ${OBJS} ${LIBS}
+
+clean:
+	rm -f ifsi *.o
+

ifsi/src/ifsi.c

@@ -0,0 +1,74 @@
+/*
+ * ifsi -- Inteno functional script interface
+ *
+ * Copyright (C) 2012-2013 Inteno Broadband Technology AB. All rights reserved.
+ *
+ * Author: dev@inteno.se
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <unistd.h>
+
+#include <libubox/blobmsg.h>
+#include <libubox/blobmsg_json.h>
+#include <libubox/uloop.h>
+
+#include <libubus.h>
+
+static struct ubus_context *ctx;
+static struct ubus_event_handler event_listener;
+static struct blob_buf b;
+
+
+static void receive_event(struct ubus_context *ctx, struct ubus_event_handler *ev,
+			  const char *type, struct blob_attr *msg)
+{
+	char *str;
+	uint32_t id;
+
+	str = blobmsg_format_json(msg, true);
+	fprintf(stdout, "I got %s event %s\n", type, str);
+	free(str);
+}
+
+int main(int argc, char **argv)
+{
+	const char *ubus_socket = NULL;
+	int ret;
+
+	uloop_init();
+
+	ctx = ubus_connect(ubus_socket);
+	if (!ctx) {
+		fprintf(stderr, "Failed to connect to ubus\n");
+		return 1;
+	}
+
+	ubus_add_uloop(ctx);
+
+	event_listener.cb = receive_event;
+	ret = ubus_register_event_handler(ctx, &event_listener, "*");
+	if (ret)
+		fprintf(stderr, "Couldn't register to router events\n");
+
+	uloop_run();
+
+	ubus_free(ctx);
+	uloop_done();
+
+	return 0;
+}
+

imonitor/Makefile

@@ -5,23 +5,19 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=imonitor
-PKG_VERSION:=1.0.1
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_PARALLEL:=1
 PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
-PKG_SOURCE_VERSION:=4beb1d5d6925507f1850a84c0b83aaf12a082f7f
+PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
 

inbd/Makefile

@@ -9,20 +9,17 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=inbd
-PKG_VERSION:=1.2.2
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=10f765f3d0fcc226b6ecf0c481598c9e7f76315e
+PKG_SOURCE_VERSION:=665a72a6bb2b5ea5a17ad6248957fe35525b3782
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
+
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 

inotify-tools/Makefile

@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=inotify-tools
+PKG_VERSION:=3.14
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=1df9af4d6cd0f4af4b1b19254bcf056aed4ae395
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/rvoicilas/inotify-tools.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/inotify-tools
+	CATEGORY:=Utilities
+	TITLE:=Tools to trace filesystem events.
+	URL:=
+endef
+
+define Package/inotify-tools/description
+	Tools to trace filesystem events.
+endef
+
+define Package/inotify-tools/install
+	$(INSTALL_DIR) $(1)/usr
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(CP) ./files/* $(1)/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0.4.1 $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0 $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywait $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywatch $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,inotify-tools))

inotify-tools/files/usr/bin/iop_write_monitor

@@ -0,0 +1,13 @@
+#! /bin/sh
+
+# is the real root mounted ?
+if [ ! -f /tmp/inotify_real_root/etc/preinit ]
+then
+	ubivol=$( cat /proc/cmdline  | sed -e "s/.*root=\(ubi:rootfs_.\).*/\1/" )
+	mkdir /tmp/inotify_real_root
+	mount -t ubifs $ubivol /tmp/inotify_real_root
+fi
+
+inotifywait -r -m -e modify -e create -e attrib -e delete -e move /tmp/inotify_real_root
+
+

iop/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys
+# Copyright (C) 2006-2011 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,7 +10,6 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=iop
 PKG_VERSION:=1.0
 PKG_RELEASE:=0
-PKG_LICENSE:=GPLv2
 
 include $(INCLUDE_DIR)/package.mk
 

iop/config

@@ -6,28 +6,22 @@ CONFIG_DEVEL=y
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
-CONFIG_PACKAGE_at=y
-CONFIG_PACKAGE_atftp=m
-CONFIG_PACKAGE_atftpd=m
-CONFIG_PACKAGE_bulkdata=y
+CONFIG_PACKAGE_alsa-lib=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
 CONFIG_PACKAGE_comgt-directip=y
 CONFIG_PACKAGE_comgt-ncm=y
+CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_ethtool=y
+CONFIG_PACKAGE_gdb=m
 CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_glib2=y
-CONFIG_PACKAGE_gre=y
-CONFIG_PACKAGE_icwmp=y
-CONFIG_PACKAGE_ieee1905=y
-CONFIG_PACKAGE_map-topology=y
-CONFIG_PACKAGE_mosquitto-client-ssl=y
-CONFIG_PACKAGE_mosquitto-ssl=y
-CONFIG_PACKAGE_wfadatad=y
-CONFIG_PACKAGE_imonitor=m
+CONFIG_PACKAGE_icwmp-curl=y
+CONFIG_PACKAGE_ifbt=y
+CONFIG_PACKAGE_imonitor=y
 CONFIG_PACKAGE_inbd=y
+CONFIG_PACKAGE_iopupgrade=y
 CONFIG_PACKAGE_ip-full=y
 CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y
@@ -36,16 +30,48 @@ CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
 # CONFIG_PACKAGE_iwatchdog is not set
-CONFIG_PACKAGE_jq=y
-CONFIG_PACKAGE_libreswan=m
-CONFIG_PACKAGE_libwifi=y
-CONFIG_PACKAGE_lscpu=y
-CONFIG_PACKAGE_luci-nginx=y
-# CONFIG_LUCI_JSMIN is not set
-# CONFIG_LUCI_CSSTIDY is not set
-CONFIG_PACKAGE_luci-mod-dashboard=y
-CONFIG_PACKAGE_luci-theme-openwrt-2020=y
-CONFIG_PACKAGE_map=y
+CONFIG_PACKAGE_juci=y
+CONFIG_PACKAGE_juci-config-backup=y
+CONFIG_PACKAGE_juci-ddns=y
+CONFIG_PACKAGE_juci-diagnostics=y
+CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
+CONFIG_PACKAGE_juci-dropbear=y
+CONFIG_PACKAGE_juci-event=y
+CONFIG_PACKAGE_juci-firewall-fw3=y
+CONFIG_PACKAGE_juci-icwmp=y
+CONFIG_PACKAGE_juci-igmpinfo=y
+CONFIG_PACKAGE_juci-minidlna=y
+CONFIG_PACKAGE_juci-mod-status=y
+CONFIG_PACKAGE_juci-mod-system=y
+CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-natalie-dect=y
+CONFIG_PACKAGE_juci-netmode=y
+CONFIG_PACKAGE_juci-network-device=y
+CONFIG_PACKAGE_juci-network-dsl=y
+CONFIG_PACKAGE_juci-network-netifd=y
+CONFIG_PACKAGE_juci-network-port=y
+CONFIG_PACKAGE_juci-openvpn=y
+CONFIG_PACKAGE_juci-owsd=y
+CONFIG_PACKAGE_juci-realtime-graphs=y
+CONFIG_PACKAGE_juci-samba=y
+CONFIG_PACKAGE_juci-snmpd=y
+CONFIG_PACKAGE_juci-sysupgrade=y
+CONFIG_PACKAGE_juci-upnp=y
+CONFIG_PACKAGE_juci-usb=y
+CONFIG_PACKAGE_juci-voice-client=y
+CONFIG_PACKAGE_juci-wifilife=y
+CONFIG_PACKAGE_juci-wireless=y
+CONFIG_PACKAGE_juci-theme-iopsys=y
+CONFIG_PACKAGE_kmod-siit=y
+CONFIG_PACKAGE_libcgroup-daemon=y
+CONFIG_PACKAGE_libcgroup=y
+# CONFIG_PACKAGE_libcgroup-utils is not set
+CONFIG_PACKAGE_libdaemon=y
+CONFIG_PACKAGE_libffmpeg-mini=y
+CONFIG_PACKAGE_libgmp=y
+CONFIG_PACKAGE_libreadline=y
+CONFIG_PACKAGE_loop-detector=m
+CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mwan3=y
 CONFIG_PACKAGE_nand-utils=y
@@ -53,17 +79,15 @@ CONFIG_PACKAGE_ndisc6=y
 CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
-CONFIG_PACKAGE_obuspa=y
 CONFIG_PACKAGE_odhcp6c=y
 CONFIG_PACKAGE_odhcpd=y
 CONFIG_PACKAGE_openssl-util=y
 CONFIG_OPENSSL_WITH_COMPRESSION=y
 CONFIG_PACKAGE_openvpn-easy-rsa=y
 CONFIG_PACKAGE_openvpn-openssl=y
-CONFIG_PACKAGE_owsd=y
-CONFIG_PACKAGE_periodicstats=y
 CONFIG_PACKAGE_peripheral_manager=y
 CONFIG_PACKAGE_port-management=y
+CONFIG_PACKAGE_power-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
 CONFIG_PACKAGE_ppp-mod-pppoe=y
 CONFIG_PACKAGE_ppp-mod-pppol2tp=y
@@ -77,41 +101,42 @@ CONFIG_PACKAGE_rdnssd=y
 CONFIG_PACKAGE_relayd=y
 CONFIG_PACKAGE_resolveip=y
 CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_rpcd-mod-rpcsys=y
 CONFIG_PACKAGE_rulengd=y
+CONFIG_PACKAGE_samba3=y
+CONFIG_PACKAGE_samba3-nmbd=y
+CONFIG_PACKAGE_snmpd=y
 CONFIG_PACKAGE_strace=y
-CONFIG_PACKAGE_sulu=y
-CONFIG_PACKAGE_swmodd=m
+CONFIG_PACKAGE_tc=y
 CONFIG_PACKAGE_tcpdump=y
 CONFIG_PACKAGE_terminfo=y
+CONFIG_PACKAGE_tptest=y
 CONFIG_PACKAGE_traceroute6=y
-CONFIG_PACKAGE_uledd=y
 CONFIG_PACKAGE_umbim=y
 CONFIG_PACKAGE_uqmi=y
-CONFIG_PACKAGE_urlfilter=y
 CONFIG_PACKAGE_usb-modeswitch=y
-CONFIG_PACKAGE_uspd=y
-CONFIG_PACKAGE_vsftpd-tls=m
+CONFIG_PACKAGE_usbreset=y
+CONFIG_PACKAGE_wget=y
 CONFIG_PACKAGE_wwan=y
+CONFIG_PACKAGE_libwifi=y
+CONFIG_PACKAGE_wifilife=y
 CONFIG_PACKAGE_wifimngr=y
-CONFIG_PACKAGE_uuidgen=y
 CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_zoneinfo-core=y
 CONFIG_PACKAGE_zoneinfo-europe=y
 CONFIG_TARGET_CUSTOMER="IOPSYS"
+CONFIG_TARGET_ROOTFS_TARGZ=y
 # CONFIG_USE_SSTRIP is not set
 CONFIG_USE_STRIP=y
 CONFIG_BUILD_LOG=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
 CONFIG_BUSYBOX_CONFIG_ARPING=y
-CONFIG_BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
 CONFIG_BUSYBOX_CONFIG_CTTYHACK=y
 CONFIG_BUSYBOX_CONFIG_DELUSER=y
 # CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
 CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
-# CONFIG_BUSYBOX_CONFIG_HTTPD is not set
+CONFIG_BUSYBOX_CONFIG_HTTPD=y
 # CONFIG_BUSYBOX_CONFIG_INSMOD is not set
 # CONFIG_BUSYBOX_CONFIG_MODINFO is not set
 # CONFIG_BUSYBOX_CONFIG_MODPROBE is not set
@@ -155,67 +180,14 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
 # CONFIG_BUSYBOX_CONFIG_NTPD is not set
-CONFIG_BUSYBOX_CONFIG_MOUNTPOINT=y
-CONFIG_BUSYBOX_CONFIG_RUN_PARTS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_RUN_PARTS_FANCY=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_GZIP_LEVELS=y
-CONFIG_BUSYBOX_CONFIG_GZIP_FAST=2
-CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_FLOAT_SLEEP=y
-CONFIG_BUSYBOX_CONFIG_FLOAT_DURATION=y
-CONFIG_BUSYBOX_CONFIG_USLEEP=y
-CONFIG_BUSYBOX_CONFIG_REALPATH=y
-CONFIG_BUSYBOX_CONFIG_TTY=y
-CONFIG_BUSYBOX_CONFIG_BLOCKDEV=y
-CONFIG_BUSYBOX_CONFIG_PARTPROBE=y
-CONFIG_BUSYBOX_CONFIG_LFS=y
-CONFIG_BUSYBOX_CONFIG_FDISK=y
-CONFIG_BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_GPT_LABEL=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED=y
-CONFIG_BUSYBOX_CONFIG_IONICE=y
-CONFIG_BUSYBOX_CONFIG_RENICE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_F2FS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
-CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
-CONFIG_BUSYBOX_CONFIG_NOHUP=y
 CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
 CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
+# CONFIG_SAMBA3_CONFIG_NO_PRINTING is not set
 # CONFIG_SIGNED_PACKAGES is not set
 CONFIG_KERNEL_DEVTMPFS=y
 CONFIG_KERNEL_DEVTMPFS_MOUNT=y
 # CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
+LOCAL_MIRROR="http://download.iopsys.eu/iopsys/mirror/"
 
-# Generation of /etc/banner.
-CONFIG_IMAGEOPT=y
-CONFIG_VERSIONOPT=y
-CONFIG_VERSION_MANUFACTURER="iopsysWrt"
-CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
-
-# Disable as much as possible of OpenWrt messy "pre-init" stuff.
-CONFIG_PREINITOPT=y
-# CONFIG_TARGET_PREINIT_SUPPRESS_STDERR is not set
-CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE=y
-CONFIG_TARGET_PREINIT_TIMEOUT=1
-# CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set
-# CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set
-CONFIG_TARGET_PREINIT_IFNAME=""
-CONFIG_TARGET_PREINIT_IP=""
-CONFIG_TARGET_PREINIT_NETMASK=""
-CONFIG_TARGET_PREINIT_BROADCAST=""
-
-# Generate rootfs tar file
-CONFIG_TARGET_ROOTFS_TARGZ=y
-
-# The urandom-seed package is very strange. It seeds urandom with urandom...
-# Disable it. Most SoCs nowadays has HW random generators anyway.
-# CONFIG_PACKAGE_urandom-seed is not set
-# CONFIG_PACKAGE_urngd is not set

iop/iop.completion

@@ -35,7 +35,7 @@ _iop()
     iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
              feeds_update genconfig generate_tarballs install_key \
              scp_changes setup_host ssh_install_key status \
-             update_package update_feed_branches ssh_upgrade smoketest"
+             update_package update_feed_branches ssh_upgrade"
 
     if [ $COMP_CWORD -eq 1 ] ; then
 

iop/scripts/extract_core.sh

@@ -6,9 +6,13 @@ function extract_core {
 	topdir=$(pwd)
 
 	# Paths to packages that should be exported.
+	paths+='package/network/services/dnsmasq '
 	paths+='package/network/config/firewall '
 	paths+='package/network/config/netifd '
+	paths+='package/network/config/qos-scripts '
 	paths+='package/utils/busybox '
+	paths+='package/base-files '
+	paths+='package/system/procd '
 	paths+='package/system/rpcd '
 	paths+='package/network/services/openvpn '
 
@@ -20,13 +24,7 @@ function extract_core {
 		echo ""
 		echo "Example: $0 extract_core"
 		echo "  -p package/utils/busybox"
-		echo "  -r feeds/openwrt_core"
-		echo "  -b devel"
-		echo ""
-		echo "Extract all default packages:"
-		echo "$0 extract_core"
-		echo "  -p default"
-		echo "  -r feeds/openwrt_core"
+		echo "  -r feeds/lede_core"
 		echo "  -b devel"
 	}
 

iop/scripts/feeds_update.sh

@@ -28,11 +28,11 @@ function feeds_update {
 
     # replace core packages with iopsys versions
     if [ $override == 1 ]; then
-		./scripts/feeds install -f -p openwrt_core -a
+		./scripts/feeds install -f -p lede_core -a
     fi
 
     # targets need to be installed explicitly
-    targets="iopsys-brcm63xx-arm iopsys-ramips intel_mips iopsys-x86 iopsys-armvirt iopsys-bcm27xx iopsys-mediatek iopsys-econet"
+    targets="iopsys-brcm63xx-mips iopsys-brcm63xx-arm iopsys-ramips intel_mips"
     for target in $targets
     do
 	rm -f target/linux/$target
@@ -57,3 +57,6 @@ function feeds_update {
 
 register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
 
+
+
+

iop/scripts/genconfig.sh

@@ -5,7 +5,7 @@ function genconfig {
 	export IMPORT=1
 	export SRCTREEOVERR=0
 	export FILEDIR="files/"
-	export THEMEDIR="tmp/juci-themes"
+	export THEMEDIR="themes"
 	CURRENT_CONFIG_FILE=".current_config_file"
 	export CONFIGPATH="package/feeds/iopsys/iop"
 	CUSTPATH="customerconfigs"
@@ -13,15 +13,11 @@ function genconfig {
 	export VERBOSE=0
 	export DEVELOPER=0
 	target="bogus"
-	target_config_path=""
-	bcm27xx="target/linux/iopsys-bcm27xx"
+	config_path=""
+	brcm63xx_mips="target/linux/iopsys-brcm63xx-mips"
 	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
 	ramips="target/linux/iopsys-ramips"
-	mediatek="target/linux/iopsys-mediatek"
-	econet="target/linux/iopsys-econet"
 	intel_mips="target/linux/intel_mips"
-	x86="target/linux/iopsys-x86"
-	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -83,53 +79,20 @@ function genconfig {
 
 	# Takes a board name and returns the target name in global var $target
 	set_target() {
-		local profile=$1
+	    local profile=$1
 
-		[ -n "$profile" ] || return
-
-		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
-			local targetpath="./target/linux/$TARGET"
-			local profiles=
-			local pfound=0
-
-			if [ -e "$targetpath/genconfig" ]; then
-				profiles=$(cd $targetpath; ./genconfig)
-
-				for p in $profiles; do
-					if [ $p == $profile ]; then
-						pfound=1
-						break
-					fi
-				done
-			fi
-
-			if [ $pfound -eq 1 ]; then
-				target="$(echo $TARGET | tr '-' '_')"
-				target_config_path="$targetpath/config"
-			fi
-
-			return
-		fi
 
+		[ -e $brcm63xx_mips/genconfig ] &&
+			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
 		[ -e $brcm63xx_arm/genconfig ] &&
 			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
 		[ -e $ramips/genconfig ] &&
 			iopsys_ramips=$(cd $ramips; ./genconfig)
-		[ -e $mediatek/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek; ./genconfig)
-		[ -e $econet/genconfig ] &&
-			iopsys_econet=$(cd $econet; ./genconfig)
 		[ -e $intel_mips/genconfig ] &&
 			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
-		[ -e $x86/genconfig ] &&
-			iopsys_x86=$(cd $x86; ./genconfig)
-		[ -e $armvirt/genconfig ] &&
-			iopsys_armvirt=$(cd $armvirt; ./genconfig)
-		[ -e $bcm27xx/genconfig ] &&
-			iopsys_bcm27xx=$(cd $bcm27xx; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_mediatek iopsys_econet iopsys_intel_mips iopsys_x86 iopsys_armvirt iopsys_bcm27xx; do
+			for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -138,10 +101,18 @@ function genconfig {
 			return
 	    fi
 
+	    for p in $iopsys_brcm63xx_mips; do
+		if [ $p == $profile ]; then
+		    target="iopsys_brcm63xx_mips"
+			config_path="$brcm63xx_mips/config"
+		    return
+		fi
+	    done
+
 	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_arm"
-			target_config_path="$brcm63xx_arm/config"
+			config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
@@ -149,23 +120,7 @@ function genconfig {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
-			target_config_path="$ramips/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_mediatek; do
-		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
-			target_config_path="$mediatek/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_econet; do
-		if [ $p == $profile ]; then
-		    target="iopsys_econet"
-			target_config_path="$econet/config"
+			config_path="$ramips/config"
 		    return
 		fi
 	    done
@@ -173,39 +128,29 @@ function genconfig {
 	    for p in $iopsys_intel_mips; do
 		if [ $p == $profile ]; then
 		    target="intel_mips"
-			target_config_path="$intel_mips/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_x86; do
-		if [ $p == $profile ]; then
-		    target="iopsys_x86"
-			target_config_path="$x86/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_armvirt; do
-		if [ $p == $profile ]; then
-		    target="iopsys_armvirt"
-			target_config_path="$armvirt/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_bcm27xx; do
-		if [ $p == $profile ]; then
-		    target="iopsys_bcm27xx"
-			target_config_path="$bcm27xx/config"
+			config_path="$intel_mips/config"
 		    return
 		fi
 	    done
 
 	}
 
-	git remote -v | grep -qE '(git@|ssh://)' && {
+	git remote -v | grep -q http || {
 		DEVELOPER=1
+
+		bcmAllowed=0
+		iceAllowed=0
+		endptAllowed=0
+		natalieAllowed=0
+		mediatekAllowed=0
+		wifilifeAllowed=0
+
+		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
+		git ls-remote git@dev.iopsys.eu:mediatek/linux.git -q 2>/dev/null && mediatekAllowed=1
+		git ls-remote git@dev.iopsys.eu:dialog/natalie-dect-12.26.git -q 2>/dev/null && natalieAllowed=1
+		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
+		git ls-remote git@dev.iopsys.eu:iopsys/wifilife.git -q 2>/dev/null && wifilifeAllowed=1
+		git ls-remote git@private.inteno.se:ice-client.git -q -q 2>/dev/null && iceAllowed=1
 	}
 
 	v() {
@@ -219,7 +164,6 @@ function genconfig {
 		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
 		echo -e "  -v|--verbose\t\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -t|--target\t\tExplicitly specify the linux target to build the board profile from"
 		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
 		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
 		echo -e "  -h|--help\t\tShow this message"
@@ -227,8 +171,8 @@ function genconfig {
 		echo -e "  -a|--list-all\t\tList all Customers and their board types"
 		echo -e "  -b|--boards\t\tList all board types"
 		echo
-		echo "Example ./iop genconfig eg400 OPERATORX"
-		echo "(if no customerconfig is chosen, iopsys config will be used)"
+		echo "Example ./iop genconfig vg50 TELIA"
+		echo "(if no customerconfig is chosen the Inteno Config will be used)"
 		echo
 		exit 0
 	}
@@ -278,30 +222,28 @@ function genconfig {
 
 	generate_config()
 	{
-		DIFFFILE="$1"
-		MASTERFILE="$2"
-		while read p; do
-			v "$p"
-			sed -r -i "$p" $MASTERFILE
-		done < $DIFFFILE
+	DIFFFILE="$1"
+	MASTERFILE="$2"
+	while read p; do
+		v "$p"
+		sed -r -i "$p" $MASTERFILE
+	done < $DIFFFILE
 	}
 
 	setup_dirs()
 	{
-		git remote -v | grep -q http || {
-			if git ls-remote $CUSTREPO -q 2>/dev/null; then
-				if [ ! -d "$CUSTPATH" ]; then
-					git clone "$CUSTREPO" "$CUSTPATH"
-				elif [ $IMPORT -eq 1 ]; then
-					cd $CUSTPATH
-					v "git pull"
-					git pull
-					cd - >/dev/null #go back
-				fi
-			else
-				echo "You do not have access to $CUSTREPO"
+		if git ls-remote $CUSTREPO -q 2>/dev/null; then
+			if [ ! -d "$CUSTPATH" ]; then
+				git clone "$CUSTREPO" "$CUSTPATH"
+			elif [ $IMPORT -eq 1 ]; then
+				cd $CUSTPATH
+				v "git pull"
+				git pull
+				cd - >/dev/null #go back
 			fi
-		}
+		else
+			echo "You do not have access to $CUSTREPO"
+		fi
 
 		if [ ! -d "$FILEDIR" ]; then
 			mkdir -p $FILEDIR
@@ -351,41 +293,22 @@ function genconfig {
 		v "cp $CONFIGPATH/config .config"
 		cp $CONFIGPATH/config .config
 
-		if [ -f $target_config_path/config ]; then
-		    cat $target_config_path/config >> .config
-		    echo "" >> .config
+		if [ -f $config_path/config ]; then
+		    cat $config_path/config >> .config
 		fi
-		if [ -f $target_config_path/$BOARDTYPE/config ]; then
-		    cat $target_config_path/$BOARDTYPE/config >> .config
-		    echo "" >> .config
+		if [ -f $config_path/$BOARDTYPE/config ]; then
+		    cat $config_path/$BOARDTYPE/config >> .config
 		fi
 
-		#special handling for intel_mips/iopsys_ramips which use TARGET_DEVICES
+		#special handling for intel_mips which use TARGET_DEVICES
 		if [ "$target" = "intel_mips" ]; then
 			subtarget="xrx500"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
+			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
 			device=$(echo $BOARDTYPE | tr a-z A-Z)
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
-		elif [ "$target" = "iopsys_ramips" ]; then
-			subtarget="mt7621"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-		elif [ "$target" = "iopsys_mediatek" ]; then
-			subtarget="mt7622"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-		elif [ "$target" = "iopsys_econet" ]; then
-			subtarget="en7562"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-		elif [ "$target" = "iopsys_bcm27xx" ]; then
-			subtarget="iopsys_bcm2711"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
 		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
@@ -412,12 +335,10 @@ function genconfig {
 				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
 					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
 					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-					echo "" >> .config
 				fi
 				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
 					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
 					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-					echo "" >> .config
 				fi
 			done
 		fi
@@ -425,10 +346,8 @@ function genconfig {
 		# Set target version
 		local GIT_TAG=$(git describe --abbrev=0 --tags)
 		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${GIT_TAG}\"" >> .config
-		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
-		# Enable Package source tree override if selected
+		# Enable Pckage source tree override if selected
 		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
 
 		# developer mode selected ?
@@ -436,8 +355,20 @@ function genconfig {
 		if [ $DEVELOPER -eq 1 ]; then
 			# rewrite url to clone with ssh instead of http
 			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
+			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
+			[ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
+			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
+			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
+			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
+			[ $wifilifeAllowed -eq 0 ] && echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		else
 			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
+			echo "CONFIG_BCM_OPEN=y" >> .config
+			echo "CONFIG_ICE_OPEN=y" >> .config
+			echo "CONFIG_ENDPT_OPEN=y" >> .config
+			echo "CONFIG_NATALIE_OPEN=y" >> .config
+			echo "CONFIG_MEDIATEK_OPEN=y" >> .config
+			echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		fi
 
 		if [ -n "$BRCM_MAX_JOBS" ]
@@ -445,12 +376,15 @@ function genconfig {
 		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
 		fi
 
+		# Force regeneration of themes
+		touch package/feeds/juci/juci/Makefile
+
 		# Force regeneration of kernel Makefile
 		# Needed to disable kmods for iopsys-brcm targets
 		touch package/kernel/linux/Makefile
 
 		# we need to signal to bradcom SDK that we have changed the board id
-		# currently boardparms.c and boardparms_voice.c is the only place that is depending on boardid name
+		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
 		# so just touch that file.
 		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
 
@@ -487,7 +421,6 @@ function genconfig {
 			-c|--clean) export CLEAN=1;;
 			-n|--no-update) export IMPORT=0;;
 			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
-			-t|--target) export TARGET="$2"; shift;;
 			-p|--profile) export PROFILE="$2"; shift;;
 			-r|--repo) export CUSTREPO="$2"; shift;;
 			-s|--override) export SRCTREEOVERR=1;;
@@ -506,7 +439,7 @@ function genconfig {
 			shift;
 		done
 
-		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
+		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
 
 		setup_dirs
 		create_and_copy_files "$@"

iop/scripts/genconfig_min.sh

@@ -1,491 +0,0 @@
-#!/bin/bash
-
-function genconfig_min {
-	export CLEAN=0
-	export SRCTREEOVERR=0
-	export FILEDIR="files/"
-	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/iopsys/iop"
-	CUSTPATH="customerconfigs"
-	export CUSTCONF="customerconfigs/customers"
-	export VERBOSE=0
-	export DEVELOPER=0
-	target="bogus"
-	target_config_path=""
-	bcm27xx="target/linux/iopsys-bcm27xx"
-	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
-	ramips="target/linux/iopsys-ramips"
-	mediatek="target/linux/iopsys-mediatek"
-	econet="target/linux/iopsys-econet"
-	intel_mips="target/linux/intel_mips"
-	x86="target/linux/iopsys-x86"
-	armvirt="target/linux/iopsys-armvirt"
-
-	Red='\033[0;31m'          # Red
-	Color_Off='\033[0m'       # Text Reset
-	Yellow='\033[0;33m'       # Yellow
-
-	function find_last {
-	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
-	}
-
-	function is_new {
-	    for opt in $conf_warned
-	    do
-		if [ "$opt" == "$1" ]
-		then
-		    return 1
-		fi
-	    done
-	    # option not found return true
-	    return 0
-	}
-
-	function verify_config {
-	    IFS=$'\n'
-	    org=$(<.genconfig.config)
-	    unset IFS
-	    local num
-	    local conf_opt
-	    local conf_org
-	    local conf_new
-
-	    #echo "lines to check $tot_lines"
-	    num=0
-	    for line in $org
-	    do
-		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
-		if [ -n "${conf_opt}" ]
-		then
-		    conf_org=$(find_last ${conf_opt} .genconfig.config)
-		    conf_new=$(find_last ${conf_opt} .config)
-		    if [ "$conf_org" != "$conf_new" ]
-		    then
-			if is_new $conf_opt
-			then
-			    echo -e "config option [${Red}$conf_opt${Color_Off}] is not set correctly in .config"
-			    echo -e "got value [${Yellow}$conf_new${Color_Off}] but wanted [${Yellow}$conf_org${Color_Off}]"
-			    echo "This is a real problem somebody needs to investigate"
-			    echo ""
-			    conf_warned="$conf_warned $conf_opt"
-			fi
-		    else
-			true
-			# for debug to see all options
-			#echo -e "wanted [$conf_org] got [$conf_new]"
-		    fi
-		fi
-		num=$((num+1))
-	    done
-	}
-
-	# Takes a board name and returns the target name in global var $target
-	set_target() {
-		local profile=$1
-
-		[ -n "$profile" ] || return
-
-		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
-			local targetpath="./target/linux/$TARGET"
-			local profiles=
-			local pfound=0
-
-			if [ -e "$targetpath/genconfig" ]; then
-				profiles=$(cd $targetpath; ./genconfig)
-
-				for p in $profiles; do
-					if [ $p == $profile ]; then
-						pfound=1
-						break
-					fi
-				done
-			fi
-
-			if [ $pfound -eq 1 ]; then
-				target="$(echo $TARGET | tr '-' '_')"
-				target_config_path="$targetpath/config"
-			fi
-
-			return
-		fi
-
-		[ -e $brcm63xx_arm/genconfig ] &&
-			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
-		[ -e $ramips/genconfig ] &&
-			iopsys_ramips=$(cd $ramips; ./genconfig)
-		[ -e $mediatek/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek; ./genconfig)
-		[ -e $econet/genconfig ] &&
-			iopsys_econet=$(cd $econet; ./genconfig)
-		[ -e $intel_mips/genconfig ] &&
-			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
-		[ -e $x86/genconfig ] &&
-			iopsys_x86=$(cd $x86; ./genconfig)
-		[ -e $armvirt/genconfig ] &&
-			iopsys_armvirt=$(cd $armvirt; ./genconfig)
-		[ -e $bcm27xx/genconfig ] &&
-			iopsys_bcm27xx=$(cd $bcm27xx; ./genconfig)
-
-	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_mediatek iopsys_econet iopsys_intel_mips iopsys_x86 iopsys_armvirt iopsys_bcm27xx; do
-				echo "$list based boards:"
-				for b in ${!list}; do
-					echo -e "\t$b"
-				done
-			done
-			return
-	    fi
-
-	    for p in $iopsys_brcm63xx_arm; do
-		if [ $p == $profile ]; then
-		    target="iopsys_brcm63xx_arm"
-			target_config_path="$brcm63xx_arm/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_ramips; do
-		if [ $p == $profile ]; then
-		    target="iopsys_ramips"
-			target_config_path="$ramips/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_mediatek; do
-		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
-			target_config_path="$mediatek/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_econet; do
-		if [ $p == $profile ]; then
-		    target="iopsys_econet"
-			target_config_path="$econet/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_intel_mips; do
-		if [ $p == $profile ]; then
-		    target="intel_mips"
-			target_config_path="$intel_mips/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_x86; do
-		if [ $p == $profile ]; then
-		    target="iopsys_x86"
-			target_config_path="$x86/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_armvirt; do
-		if [ $p == $profile ]; then
-		    target="iopsys_armvirt"
-			target_config_path="$armvirt/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_bcm27xx; do
-		if [ $p == $profile ]; then
-		    target="iopsys_bcm27xx"
-			target_config_path="$bcm27xx/config"
-		    return
-		fi
-	    done
-
-	}
-
-	git remote -v | grep -qE '(git@|ssh://)' && {
-		DEVELOPER=1
-
-		bcmAllowed=0
-		endptAllowed=0
-
-		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
-	}
-
-	v() {
-		[ "$VERBOSE" -ge 1 ] && echo "$@"
-	}
-
-	usage() {
-		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
-		echo
-		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\t\tVerbose"
-		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -t|--target\t\tExplicitly specify the linux target to build the board profile from"
-		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
-		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
-		echo -e "  -h|--help\t\tShow this message"
-		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\t\tList all Customers and their board types"
-		echo -e "  -b|--boards\t\tList all board types"
-		echo
-		echo "Example ./iop genconfig eg400 OPERATORX"
-		echo "(if no customerconfig is chosen, iopsys config will be used)"
-		echo
-		exit 0
-	}
-
-	list_customers()
-	{
-		local ALL="$1"
-		local CUSTOMER="$2"
-		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common )"
-			if [ "$boards" ]; then
-				echo "$CUSTOMER has following boards:"
-				for board in $boards; do
-					echo -e "\t$board"
-				done
-			else
-				echo "No boards found for $CUSTOMER"
-			fi
-		elif [ "$CUSTOMER" ]; then
-			echo "No customer called $CUSTOMER"
-			exit 1
-		elif [ -d $CUSTCONF ]; then
-			local customers="$(ls -1 $CUSTCONF)"
-			if [ "$customers" -a "$ALL" == 1 ]; then
-				for customer in $customers; do
-					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common )"
-					if [ "$boards" ]; then
-						for board in $boards; do
-							echo -e "\t$board"
-						done
-					else
-						echo "has no boards"
-					fi
-				done
-			elif [ "$customers" ]; then
-				echo -e "$customers"
-			else
-				echo "no customers found"
-			fi
-		else
-			echo "No $CUSTCONF folder found"
-		fi
-		exit 0
-	}
-
-
-	generate_config()
-	{
-		DIFFFILE="$1"
-		MASTERFILE="$2"
-		while read p; do
-			v "$p"
-			sed -r -i "$p" $MASTERFILE
-		done < $DIFFFILE
-	}
-
-	setup_dirs()
-	{
-
-		if [ ! -d "$FILEDIR" ]; then
-			mkdir -p $FILEDIR
-		elif [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $FILEDIR*"
-			rm -rf $FILEDIR*
-		fi
-	}
-
-	create_and_copy_files()
-	{
-		local BOARDTYPE=$1
-		shift
-		local CUSTOMERS=$@
-
-		# Validate seleced board and customers
-		set_target $BOARDTYPE
-		if [ $target == "bogus" ]; then
-			echo "Hardware profile does not exist"
-			exit 1
-		elif [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-					echo "Customer profile for '$CUSTOMER' does not exist"
-					exit 1
-				elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-					echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-					if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-						echo "Common profile configuration will be used"
-					else
-						exit 1
-					fi
-				fi
-			done
-		fi
-
-		# Generate base config
-		rm -f .config
-		v "Config $BOARDTYPE selected"
-		v "cp $CONFIGPATH/config .config"
-		cp $CONFIGPATH/config .config
-
-		if [ -f $target_config_path/config ]; then
-		    cat $target_config_path/config >> .config
-		    echo "" >> .config
-		fi
-		if [ -f $target_config_path/$BOARDTYPE/config ]; then
-		    cat $target_config_path/$BOARDTYPE/config >> .config
-		    echo "" >> .config
-		fi
-
-		#special handling for intel_mips/iopsys_ramips which use TARGET_DEVICES
-		if [ "$target" = "intel_mips" ]; then
-			subtarget="xrx500"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			device=$(echo $BOARDTYPE | tr a-z A-Z)
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
-		elif [ "$target" = "iopsys_ramips" ]; then
-			subtarget="mt7621"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-		elif [ "$target" = "iopsys_mediatek" ]; then
-			subtarget="mt7622"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-		elif [ "$target" = "iopsys_econet" ]; then
-			subtarget="en7562"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-		elif [ "$target" = "iopsys_bcm27xx" ]; then
-			subtarget="iopsys_bcm2711"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
-			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-		else
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-		fi
-
-		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
-
-		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-					echo "" >> .config
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-					echo "" >> .config
-				fi
-			done
-		fi
-
-		# Set target version
-		local GIT_TAG=$(git describe --abbrev=0 --tags)
-		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${GIT_TAG}\"" >> .config
-		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
-
-
-		# Enable Package source tree override if selected
-		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
-
-		# developer mode selected ?
-		echo "CONFIG_DEVEL=y" >>.config
-
-		if [ -n "$BRCM_MAX_JOBS" ]
-		then
-		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
-		fi
-
-		# Force regeneration of kernel Makefile
-		# Needed to disable kmods for iopsys-brcm targets
-		touch package/kernel/linux/Makefile
-
-		# we need to signal to bradcom SDK that we have changed the board id
-		# currently boardparms.c and boardparms_voice.c is the only place that is depending on boardid name
-		# so just touch that file.
-		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-
-		# Store generated config
-		cp .config .genconfig.config
-
-		# Set default values based on selected parameters
-		v "$(make defconfig 2>&1)"
-
-		echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
-
-		# Clean base-file package to force rebuild when changing profile
-		v "$(make package/base-files/clean 2>&1)"
-
-		verify_config
-	}
-
-	####### main #####
-	if [ ! -e tmp/.iop_bootstrap ]; then
-		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
-		echo "Run: iop feeds_update"
-		exit 0
-	fi
-
-	if [ $# -eq 0 ]; then
-		echo Current profile:
-		cat $CURRENT_CONFIG_FILE
-		echo "Try ./iop genconfig -h' to get instructions if you want to change current config"
-		exit 0
-	else
-		while [ -n "$1" ]; do
-			case "$1" in
-
-			-c|--clean) export CLEAN=1;;
-			-n|--no-update) export IMPORT=0;;
-			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
-			-t|--target) export TARGET="$2"; shift;;
-			-p|--profile) export PROFILE="$2"; shift;;
-			-r|--repo) export CUSTREPO="$2"; shift;;
-			-s|--override) export SRCTREEOVERR=1;;
-			-S|--brcmsingel) export BRCM_MAX_JOBS=1;;
-			-h|--help) usage;;
-			-l|--list) list_customers 0 $2;;
-			-a|--list-all)list_customers 1;;
-			-b|--boards)set_target LIST;exit 0;;
-			-*)
-				echo "Invalid option: $1 "
-				echo "Try -h or --help for more information."
-				exit 1
-				;;
-			*) break;;
-			esac
-			shift;
-		done
-
-		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
-
-		setup_dirs
-		create_and_copy_files "$@"
-	fi
-}
-
-register_command "genconfig_min" "Generate configuration for customer with manual board configuration"

iop/scripts/generate_tarballs.sh

@@ -1,32 +1,40 @@
 #!/bin/bash
-# shellcheck disable=SC2029
+
 
 build_bcmkernel_consumer() {
-	local tarfile bcmkernelcommith sdkversion serverpath serverlink
-
-	sdkversion="$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')"
-	sdkversion="${sdkversion:0:4}${sdkversion:(-1)}"
-	bcmkernelcommith="$(grep -w "PKG_SOURCE_VERSION:" "$curdir/feeds/broadcom/bcmkernel/${sdkversion:0:5}"*".mk" | cut -d'=' -f2)"
-
-	[ -n "$board" ] && [ -n "$bcmkernelcommith" ] || return
-
-	serverpath="$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz"
-	serverlink="$FPATH/bcmopen-$board-$majver.$minver-latest"
-
+	local tarfile bcmkernelcommith sdkversion
+	sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
+	sdkversion=${sdkversion:0:4}${sdkversion:(-1)}
+	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/broadcom/bcmkernel/${sdkversion:0:5}*.mk | cut -d'=' -f2)
 	# do not build bcmopen sdk if it was already built before
-	# if it was, check if there's a symlink in place and create it if missing
-	ssh "$SERVER" "test -f '$serverpath' && { test -L '$serverlink' || ln -sf '$serverpath' '$serverlink'; }" && return
-
-	cd "./build_dir/target-"*"/bcmkernel-"*"-${sdkversion:0:4}"*"/bcm963xx/release"
-	bash do_consumer_release -p "$profile" -y -F
-
+	[ -n "$board" -a -n "$bcmkernelcommith" ] || return
+	ssh $SERVER "test -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz" && return
+	cd ./build_dir/target-*/bcmkernel-*-${sdkversion:0:4}*/bcm963xx/release
+	bash do_consumer_release -p $profile -y -F
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
-	[ $(ls -1 $tarfile | wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
-
-	scp -pv $tarfile "$SERVER":"$serverpath"
-	ssh "$SERVER" "test -f '$serverpath' && ln -sf '$serverpath' '$serverlink'"
+	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
+	scp -pv $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
+	ssh $SERVER "[ -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz ] && ln -sf $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz $FPATH/bcmopen-$board-$majver.$minver-latest"
 	rm -f $tarfile
+	cd "$curdir"
+}
 
+build_natalie_consumer() {
+	# create natalie-dect open version tar file
+	local natalieversion nataliecommith
+	grep -q "CONFIG_TARGET_NO_DECT=y" .config && return
+	natalieversion=$(grep -w "PKG_VERSION:" ./feeds/iopsys/natalie-dect/Makefile | cut -d'=' -f2)
+	nataliecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/natalie-dect/Makefile | cut -d'=' -f2)
+	[ -n "$profile" -a -n "$natalieversion" -a -n "$nataliecommith" ] || return
+	ssh $SERVER "test -f $FPATH/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
+	cd ./build_dir/target-*/natalie-dect-$natalieversion/
+	mkdir natalie-dect-open-$natalieversion
+	cp -f ipkg-*/natalie-dect/lib/modules/*/extra/dect.ko natalie-dect-open-$natalieversion/dect.ko
+	tar -czv  natalie-dect-open-$natalieversion/ -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
+	scp -pv natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $SERVER:$FPATH/
+	cp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $curdir/
+	rm -rf natalie-dect-open-$natalieversion
+	rm -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
 	cd "$curdir"
 }
 
@@ -36,7 +44,7 @@ build_endptmngr_consumer() {
 	grep -q "CONFIG_TARGET_NO_VOICE=y" .config && return
 	endptversion=$(grep -w "PKG_VERSION:" ./feeds/iopsys/endptmngr/Makefile | cut -d'=' -f2)
 	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/endptmngr/Makefile | cut -d'=' -f2)
-	[ -n "$profile" ] && [ -n "$endptversion" ] && [ -n "$endptcommith" ] || return
+	[ -n "$profile" -a -n "$endptversion" -a -n "$endptcommith" ] || return
 	ssh $SERVER "test -f $FPATH/endptmngr-$profile-$endptversion-$endptcommith.tar.gz" && return
 	cd ./build_dir/target-*/endptmngr-$endptversion/
 	mkdir endptmngr-open-$endptversion
@@ -51,6 +59,69 @@ build_endptmngr_consumer() {
 	cd "$curdir"
 }
 
+build_ice_consumer() {
+	# create ice-client open version tar file
+	local iceversion icebasever icerelease icecommith
+	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/ice-client/Makefile | head -1 | cut -d'=' -f2)
+	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
+	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
+	iceversion=$icebasever$icerelease
+	[ -n "$target" -a -n "$iceversion" -a -n "$icecommith" ] || return
+	ssh $SERVER "test -f $FPATH/ice-client-$target-$iceversion-$icecommith.tar.gz" && return
+	cd ./build_dir/target-*/ice-client-$icebasever/ipkg-* || cd ./build_dir/target-mips*musl-*/ice-client-$icebasever/ipkg-*
+	tar -czv  ice-client -f ice-client-$target-$iceversion-$icecommith.tar.gz
+	scp -pv ice-client-$target-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
+	cp ice-client-$target-$iceversion-$icecommith.tar.gz $curdir/
+	rm -f ice-client-$target-$iceversion-$icecommith.tar.gz
+	cd "$curdir"
+}
+
+build_wifilife_consumer() {
+	local ver commit
+	ver=$(grep -w "PKG_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
+	commit=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
+	[ -n "$ver" -a -n "$commit" ] || return
+	ssh $SERVER "test -f $FPATH/wifilife-$target-${ver}_${commit}.tar.xz" && return
+	cd ./build_dir/target-*/wifilife-$ver/ipkg-* || cd ./build_dir/target-mips*musl-*/wifilife-$ver/ipkg-*
+	mkdir -p wifilife-$ver/src
+	cp -rf wifilife/usr/sbin/* wifilife-$ver/src/
+	tar Jcf wifilife-${target}-${ver}_${commit}.tar.xz wifilife-$ver
+	scp -pv wifilife-$target-${ver}_${commit}.tar.xz $SERVER:$FPATH/
+	cp wifilife-${target}-${ver}_${commit}.tar.xz $curdir/
+	rm -rf wifilife-$ver
+	rm -f wifilife-${target}-${ver}_${commit}.tar.xz
+	cd "$curdir"
+}
+
+build_mediatek_kernel() {
+	local mediatek_commit kernel_version kernel
+
+	mediatek_commit=$(grep CONFIG_KERNEL_GIT_COMMIT .config | cut -d '=' -f2 | tr -d '"')
+	kernel_version=$(grep KERNEL_PATCHVER target/linux/iopsys-ramips/Makefile  | cut -d '=' -f2)
+	kernel=linux-${kernel_version}.*
+	[ -n "$mediatek_commit" ] || return
+	ssh $SERVER "test -f $FPATH/mediatek-kernel-open-$mediatek_commit.tar.gz" && return
+	echo "Building mediatek kernel tarball from kernel commit:"	
+	echo $mediatek_commit
+	cd build_dir/target-mipsel_1004kc*/linux-iopsys-ramips*/$kernel
+
+	# Save Kconfig files to recreate the same kernel config,
+	# delete everyting else.
+	find drivers/net/wireless/mt_wifi -type f ! -name Kconfig | xargs rm
+	find drivers/net/wireless/rlt_wifi -type f ! -name Kconfig | xargs rm
+
+	# remove git repo
+	rm -rf .git
+
+	# patch kernel for openstk
+	ls consumer_release | while read line; do patch -p1 < consumer_release/$line; done
+	cd ..
+
+	tar -czv $kernel -f mediatek-kernel-open-$mediatek_commit.tar.gz
+	scp -pv mediatek-kernel-open-$mediatek_commit.tar.gz $SERVER:$FPATH/
+	cd "$curdir"
+}
+
 function print_usage {
 	echo "Usage: $0 generate_tarballs"
 	echo "  -t <target>"
@@ -58,13 +129,14 @@ function print_usage {
 
 function generate_tarballs {
 
-    SERVER="god@download.iopsys.eu"
-    FPATH="/var/www/html/iopsys/opensdk"
+    SERVER="god@software.inteno.se"
+    FPATH="/var/www/html/iopsys/consumer"
 
     set -e
     git remote -v | grep -q http && return # do not continue if this is an open SDK environment
 
-    board=$(grep CONFIG_TARGET_FAMILY .config | cut -d'=' -f2 | tr -d '"')
+    target=$(grep CONFIG_TARGET_BOARD .config | cut -d'=' -f2 | tr -d '"')
+    board=$(grep CONFIG_TARGET_IBOARDID .config | cut -d'=' -f2 | tr -d '"')
     profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
     majver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f1 -d .)
     minver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f2 -d .)
@@ -88,14 +160,21 @@ function generate_tarballs {
 		esac
 	done
 
-	if [ -z "$stk_target" ]; then
+	if [ ! -n "$stk_target" ]; then
 		print_usage
 		exit 1
 	fi
 
 	if [ "$stk_target" == "broadcom" ]; then
 		build_bcmkernel_consumer
+		build_natalie_consumer
 		build_endptmngr_consumer
+		build_ice_consumer
+		build_wifilife_consumer
+	elif [ "$stk_target" == "mediatek" ]; then
+		build_mediatek_kernel
+		build_ice_consumer		
+		build_wifilife_consumer
 	else
 		echo "Invalid target: $stk_target"
 		print_usage

iop/scripts/install_key.sh

@@ -1,55 +1,18 @@
 # this is a developer helper script to install the public ssh key in the created image
 
-DROPBEAR_AUTHORIZED_KEYS_FILE=/etc/dropbear/authorized_keys
-
-function get_ssh_public_keys {
-    (
-        shopt -s nullglob
-        # home directory, not all of those are supported by dropbear,
-        # but let's include them now already to decrease future maintenance
-        cat /dev/null ~/.ssh/{id_rsa,id_dsa,id_ecdsa,id_ecdsa_sk,id_ed25519,id_ed25519_sk,id_xmss}.pub 2> /dev/null
-        # keys added manually or automatically to the build dir
-        cat "files${DROPBEAR_AUTHORIZED_KEYS_FILE}" 2>/dev/null
-        # keys in the agent (useful when using SSH agent forwarding)
-        ssh-add -L 2> /dev/null
-    ) | sort | uniq
-}
-
 function install_key {
-    local build_dir_dropbear_authorized_keys_file="files${DROPBEAR_AUTHORIZED_KEYS_FILE}"
-    mkdir -p "$(dirname "$build_dir_dropbear_authorized_keys_file")"
-    get_ssh_public_keys > "$build_dir_dropbear_authorized_keys_file"
-    chmod 0644 "$build_dir_dropbear_authorized_keys_file"
-    echo "Keys in "$build_dir_dropbear_authorized_keys_file" are now:"
-    cat "$build_dir_dropbear_authorized_keys_file"
-    echo
-    echo "Disabling login on serial console..."
+
+    mkdir -p files/etc/dropbear
+    test -e ~/.ssh/id_dsa.pub && cat ~/.ssh/id_dsa.pub >>files/etc/dropbear/authorized_keys
+    test -e ~/.ssh/id_rsa.pub && cat ~/.ssh/id_rsa.pub >>files/etc/dropbear/authorized_keys
+    chmod 0644 files/etc/dropbear/authorized_keys
+
     echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
     echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
-    echo "console::askconsolelate:/bin/cttyhack /bin/ash --login" >>files/etc/inittab
+    echo "tty/0::askfirst:/bin/ash --login" >>files/etc/inittab
+    echo "console::askfirst:/bin/cttyhack /bin/ash --login" >>files/etc/inittab
 
     echo Done
 }
 
-function ssh_install_key_help() {
-    echo Usage: $0 ssh_install_key HOSTNAME
-    echo
-    echo "Installs SSH public keys to a device's authorized_keys file"
-}
-
-
-# this is a developer helper script to install the public ssh key on host running dropbear
-function ssh_install_key {
-    if [ $# -ne 1 ] || [ "$1" == '--help' ]; then
-        ssh_install_key_help
-        [ $# -eq 1 ]; return
-    fi
-    host="$1"
-    local keys="$(get_ssh_public_keys)"
-    echo "Adding the following keys to $DROPBEAR_AUTHORIZED_KEYS_FILE on $host:"
-    echo "$keys"
-    ssh root@$host "echo '$keys' >> '$DROPBEAR_AUTHORIZED_KEYS_FILE'" && echo ok
-}
-
-register_command "ssh_install_key" "Install the users public ssh key on host running dropbear"
 register_command "install_key" "Install the user's public ssh key in the created image"

iop/scripts/iopupgrade.sh

@@ -230,7 +230,7 @@ function ssh_upgrade {
     upd_fw_base=""
     upd_fw=""
     upd_host="192.168.1.1"
-    upd_sysupgrade=1
+    upd_sysupgrade=0
     do_dialog=0
 
     while getopts "f:hnxt:iscb" opt; do
@@ -280,14 +280,6 @@ function ssh_upgrade {
 	set_config_string CONFIG_TARGET_BOARD
 	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
 
-	# if target uses pkgtb
-	if [ -z "$firmwares"]
-	then
-	    # pkgtb files can not be streamed so copy over the file witch scp
-	    use_scp=1
-	    firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t last.pkgtb)
-	fi
-
 	for upd_fw_base in $firmwares
 	do
 	    #echo "firmware $upd_fw"
@@ -321,20 +313,10 @@ function ssh_upgrade {
 	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
 
 	file_size_kb=`du -k "$upd_fw" | cut -f1`
-	if [ "$use_scp" == "1" ]
-	then
-	    scp $upd_fw root@$upd_host:/tmp/ &&
-		ssh -o ConnectTimeout=60 root@$upd_host "iopu $extra_arg -f /tmp/$upd_fw_base"
-	else
-	    cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
-	fi
+	cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
     else
-	extra_args=""
-	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -d"
-	[ $upd_keepconf   -eq 0 ] && extra_args="$extra_args -n"
-
 	scp $upd_fw root@$upd_host:/tmp/ &&
-	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $extra_args /tmp/$upd_fw_base" &&
+	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $3 /tmp/$upd_fw_base" &&
 	    echo "sysupgrade done!"
     fi
 }

iop/scripts/licenses_gen.sh

@@ -1,35 +0,0 @@
-#!/bin/sh
-function license_report {
-    LICDIR="/tmp/licenses-generator/"
-    LICBIN="${LICDIR}/bin"
-
-
-    dpkg -s python3 python3-requests python3-yaml python3-mako python3-six &> /dev/null
-    if [ $? -ne 0 ]
-        then
-            echo "Missing dependencies"
-            sudo apt-get update
-            sudo apt-get install python3 python3-requests python3-yaml python3-mako python3-six
-
-        else
-            echo    "Dependecy check passed"
-    fi
-
-
-if [ -d "$LICDIR" ]; then
-  ### Take action if $DIR exists ###
-  echo "Creating json licences file and html formated report"
-else
-  ###  Control will jump here if $DIR does NOT exists ###
-  echo "Error: licenses-generator not found. getting from iopsys repo"
-  git clone git@dev.iopsys.eu:iopsys/licenses-generator.git $LICDIR
-fi
-  LICGET=`${LICBIN}/licenses-generator  gen-License bin/`
-  echo $LICGET
-  ${LICBIN}/licenses-generator gen-licrprt $LICGET
-exit 0
-
-}
-
-
-register_command "license_report" "Generate a Licence report on latest build in json format and html under reports"

iop/scripts/scp_changes.sh

@@ -0,0 +1,70 @@
+# this is a developer helper script to SCP changed files to remote host
+
+ROOT=build_dir/target-mips_uClibc-0.9.33.2/root-iopsys-brcm63xx-mips/
+ROOT_OLD=tmp/root_old/
+ROOT_TMP=tmp/root_tmp/
+
+function scp_changes_reset {
+	{ cd `dirname $0`
+		rm -rf "$ROOT_OLD"
+		mkdir -p "$ROOT_OLD"
+		cp -a "$ROOT"* "$ROOT_OLD"
+	}
+}
+
+function scp_changes {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 scp_changes <host/-r(eset)/-p(retend)>"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		if [ ! -d $ROOT ]; then
+			echo "$ROOT does not exist"
+			echo "please build the project first"
+			exit 1;
+		fi
+		if [ "$1" = "-r" ]; then
+			echo "reset changes"
+			scp_changes_reset
+			exit 0
+		fi
+		if [ ! -d $ROOT_OLD ]; then
+			echo "$ROOT_OLD does not exist"
+			echo "you didn't store state of previous buildroot"
+			#echo "please run ./scp_changes_reset.sh"
+			echo "doing it now"
+			scp_changes_reset
+			exit 1;
+		fi
+		FILES=`diff -rq "$ROOT" "$ROOT_OLD" 2>&1 | sed -ne "s?^Files .* and $ROOT_OLD\\(.*\\) differ?\\1?p" -ne "s?^Only in $ROOT\\(.*\\): \\(.*\\)?\\1/\\2?p"`
+		if [ "$1" = "-p" ]; then
+			echo "files that would be copied:"
+			echo $FILES
+			exit 0
+		fi
+		for f in $FILES
+		do
+			mkdir -p "$ROOT_TMP`dirname $f`"
+			cp -af "$ROOT$f" "$ROOT_TMP$f"
+		done
+		if [ -d "$ROOT_TMP" ]; then
+			echo "scp changed files to $1"
+			pushd "$ROOT_TMP" 2>&1 >/dev/null
+			scp -r * root@$1:/
+			RETVAL=$?
+			popd 2>&1 >/dev/null
+			rm -rf "$ROOT_TMP"
+			if [ "$RETVAL" -eq 0 ]; then
+				scp_changes_reset
+			else
+				echo "scp error"
+				exit $RETVAL
+			fi
+		else
+			echo "no change"
+		fi
+	}
+}
+
+register_command "scp_changes" "<host/-r(eset)/-p(retend)>  SCP only changed files to device"

iop/scripts/ssh_install_key.sh

@@ -0,0 +1,17 @@
+# this is a developer helper script to install the public ssh key on host running dropbear
+
+function ssh_install_key {
+	if [ -e ~/.ssh/id_rsa.pub ]; then
+		echo "Adding public RSA key to $1"
+		KEY=`cat ~/.ssh/id_rsa.pub`
+	elif [ -e ~/.ssh/id_dsa.pub ]; then
+		echo "Adding public DSA key to $1"
+		KEY=`cat ~/.ssh/id_dsa.pub`
+	else
+		echo "No public key found"
+		exit 1
+	fi
+	ssh root@$1 "echo '$KEY' >> /etc/dropbear/authorized_keys" && echo ok
+}
+
+register_command "ssh_install_key" "Install the users public ssh key on host running dropbear"

iop/scripts/taas.sh

@@ -1,89 +0,0 @@
-
-# Shorthand command for doing a HIL runtime smoketest on the
-# latest built image. Does the image boot up correctly?
-# More info here:
-# https://dev.iopsys.eu/iopsys/iopsys-taas
-
-
-#--------------------------------------------------------------
-function taas-init() {
-	local f
-
-	# Path to TaaS binarys. Try some likely ones.
-	if ! which taas-smoketest >/dev/null; then
-		PATH="${PATH}:${PWD}/../iopsys-taas/bin"
-		PATH="${PATH}:${PWD}/../taas/bin"
-		PATH="${PATH}:${HOME}/iopsys-taas/bin"
-		PATH="${PATH}:${HOME}/taas/bin"
-		PATH="${PATH}:${HOME}/bin"
-		PATH="${PATH}:/opt/iopsys-taas/bin"
-		PATH="${PATH}:/opt/taas/bin"
-	fi
-
-	if ! which taas-smoketest >/dev/null; then
-		echo "Error; TaaS is missing! Install it with:"
-		echo "git clone git@dev.iopsys.eu:iopsys/iopsys-taas.git ../iopsys-taas"
-		exit 1
-	fi
-
-	# Create a list of all images which might be of use.
-	for f in ${PWD}/bin/targets/iopsys-*/generic/last.*; do
-		[[ -s "$f" ]] && images+=("$f")
-	done
-
-	# Convert Iopsys target name to the TaaS product name format
-	# according to what is available in the remote lab for HIL.
-	# Also find a suitable image.
-	product=$(grep CONFIG_TARGET_PROFILE .config | \
-		tr -s "=\"" " " | cut -d " " -f 2) || exit
-	case "$product" in
-		smarthub3)
-			export product="SmartHub3a"
-			;;
-		dg400prime|eg400|ex600)
-			export product=$(echo -n "$product" | tr [[:lower:]] [[:upper:]])
-			;;
-		*)
-			echo "Unsupported target; skipping!"
-			exit 0
-			;;
-	esac
-
-	if [[ ${#images[@]} -eq 0 ]]; then
-		echo "No image found"
-		exit 1
-	fi
-}
-
-
-
-#--------------------------------------------------------------
-function taas-smoketest {
-	declare -a images
-
-	taas-init || return
-	echo "Testing a $product with ${images[@]}..."
-	command taas-smoketest "${images[@]}" "$product" "$@"
-}
-
-
-
-#--------------------------------------------------------------
-function taas-bootstrap {
-	declare -a images
-
-	if [[ -n "$1" ]]; then
-		taas-init || return
-		echo "Flashing $1..."
-		command taas-bootstrap "${images[@]}" "$@"
-	else
-		echo "Usage: ./iop taas-bootstrap dutX"
-		exit 1
-	fi
-}
-
-
-
-register_command "taas-bootstrap" "Write image to a remote lab device."
-register_command "taas-smoketest" "Write image to a remote lab device and test it."
-

iop/scripts/update_package.sh

@@ -492,8 +492,7 @@ check_feeds()
     echo "Now checking if any changes have been done to the feeds."
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
 
-    feeds="$1"
-    [ -n "$feeds" ] || feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
+    feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
     for feed in `echo $feeds`
     do
 		feed_hash=$(feeds_hash $feed)
@@ -553,7 +552,7 @@ check_feeds()
     done
 }
 
-is_local_and_remote_same()
+feeds_at_top()
 {
     git remote update 2>/dev/null 1>/dev/null
     LOCAL=$(git rev-parse @)
@@ -582,7 +581,7 @@ is_local_and_remote_same()
 usage(){
 	echo -e "$0 [flags]"
 	echo -e "flags:"
-	echo -e "  -f\tFeed to update"
+	echo -e "  -v\tVerbose mode"
 	echo -e "  -h\tShow this help"
 	echo -e "  -u\tUpdate package version\n"
 }
@@ -590,7 +589,7 @@ usage(){
 # Exported interface
 function update_package {
 
-    UPDATE=0
+	UPDATE=0
 
     Color_Off='\033[0m'       # Text Reset
 
@@ -604,18 +603,18 @@ function update_package {
     Cyan='\033[0;36m'         # Cyan
     White='\033[0;37m'        # White
 
-    while getopts "f:hu" opt; do
+    while getopts "v:hu" opt; do
 	case $opt in
-	    f)
-		feed=$OPTARG
+	    v)
+		verbose=$OPTARG
 		;;
 	    h)
-		usage
-		exit 1
-		;;
-	    u)
-		UPDATE=1
-		;;
+			usage
+			exit 1
+			;;
+		u)
+			UPDATE=1
+			;;
 	    \?)
 		echo "Invalid option: -$OPTARG" >&2
 		exit 1
@@ -638,9 +637,9 @@ function update_package {
     set -E
     trap '[ "$?" -ne 99 ] || exit 99' ERR
 
-    is_local_and_remote_same
-    [ -n "$feed" ] || check_packages
-    check_feeds $feed
+    feeds_at_top
+    check_packages
+    check_feeds
 }
 
 register_command "update_package" "Publish changes to packages and feeds"

iopupgrade/Makefile

@@ -0,0 +1,55 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=iopupgrade
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=01f2afd6c831d6f9eb2940c7e7af16f7e4d439c2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopupgrade
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/iopupgrade
+	CATEGORY:=Utilities
+	TITLE:=Iopsys system upgrade utility
+	URL:=
+#	DEPENDS:=
+endef
+
+define Package/iopupgrade/description
+	Application handling peripheral
+endef
+
+define Package/iopupgrade/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/etc/
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/iopupgrade $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,iopupgrade))
+ 

iopupgrade/files/sbin/iopu

@@ -0,0 +1,279 @@
+#!/bin/sh
+
+###############################################################################
+# Global variables. can be used directly in any function called.
+cur_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
+		# eg: rootfs_0 or rootfs_1, currently used
+upd_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
+		# eg: rootfs_0 or rootfs_1, the one we want to update
+cmdline=""	# command line settings.
+cmdline_match="" # Headers to match to the image
+
+###############################################################################
+# file local variables. should not be used in imported functions. Can be used
+# by functions declared in this script
+chroot_cmdline=""	# command line for the iop_chroot command.
+board=""		# string, Board name that is going to be matched
+			# against header of firmware image
+upd_ubi_id=""		# num,	UBI volume number for the volume name
+			# "rootfs_$upd_vol", use to know what volume to run
+			# ubiupdatevol on.
+run_cleanup=0		# if set the cleanup should be run otherwise we skip it.
+run_mount_cleanup=0	# set if we should run umount in cleanup
+upd_kernel=0		# set to 1 if system has the kernel in own mtd partition
+upd_cfe=0		# set to 1 if system is using cfe as bootloader.
+log_stdout=1		# set to 0 to prevent the log to also print to stdout
+upd_noreboot=0		# set to 1 if we should not reboot after programming
+upd_forceimage=0	# set this to force upgrade even if image is for wrong board.
+upd_forceboot=0		# set this to force upgrade of boot loader
+###############################################################################
+# import external functions
+source /lib/upgrade/iopsys.sh
+[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
+
+# only call function if it exists
+function_call() {
+    if type "$1" 2>/dev/null >/dev/null
+    then
+	$1 $@
+    fi
+}
+
+###############################################################################
+# Cleanup and error handling functions.
+function log {
+    TIME=$(date)
+    [ $log_stdout -eq 1 ] && echo "$@"
+    echo "[$TIME] $@" >>/tmp/upd_log
+}
+
+# we need to handle ctrl-c, segmentation fault, sigpipe and other abnormal
+# terminations. no printing to stdout/stderr allowed in this function or
+# anyhting it calls as stdout/stderr might no longer exist
+function finish {
+
+    if [ "$run_cleanup" == "1" ]
+    then
+
+	function_call upd_cleanup
+	log ""
+    fi
+
+    if [ "$run_mount_cleanup" == "1" ]
+    then
+	log "Cleaning up after mount"
+	umount_newroot
+    fi
+    # always kill the timeout process, will leave the sleep but that is harmless
+    # as long as the kill will nerver be run.
+    kill $TIMEOUT_PID 2>/dev/null
+
+    lock -u /tmp/iopu.lock
+}
+
+function sig_pipe {
+    log_stdout=0  # stdin,stdout,stderr do not exist anymore
+    log "Got sigpipe. Turning of log printing to stdout"
+}
+
+# if a timout happens terminate
+function timeout {
+    finish
+    exit 1
+}
+
+# Not much that can be done if the mount fails but to try again.
+# if after 10 seconds there still is errors abort program.
+# UBIFS has some wierd time intervall after ubiupdatevol where
+# a mount of the newly written data results in a busy error.
+function mount_retry {
+    local tries=0
+
+    while [ $tries -lt 10 ]
+    do
+	if mount $@ 2>/dev/null
+	then
+	    return
+	fi
+	tries=$((tries + 1))
+	sleep 1
+    done
+
+    log "mount failed for command [mount $@] so upgrade failed."
+
+    exit 1
+}
+
+function mount_newroot {
+    run_mount_cleanup=1
+    mkdir -p /tmp/newroot
+    mkdir -p /tmp/newroot_overlay
+
+    mount_retry -t ubifs ubi0:rootfs_$upd_vol /tmp/newroot
+
+    mount_retry -o noatime,lowerdir=/tmp/newroot,upperdir=/tmp/newroot/overlay,workdir=/tmp/newroot/lib/overlay.tmp -t overlay "overlayfs:/tmp/newroot/overlay" /tmp/newroot_overlay
+    mount_retry --bind /tmp/newroot/ /tmp/newroot_overlay/rom
+
+    mount_retry --bind /dev /tmp/newroot_overlay/dev
+    mount_retry --bind /proc /tmp/newroot_overlay/proc
+    mount_retry --bind /sys /tmp/newroot_overlay/sys
+    mount_retry -t tmpfs -o noatime,mode=0755 root /tmp/newroot_overlay/tmp
+
+    mkdir -p /tmp/newroot_overlay/tmp/oldroot
+    mount_retry --bind / /tmp/newroot_overlay/tmp/oldroot
+    mount_retry --bind /tmp /tmp/newroot_overlay/tmp/oldroot/tmp
+}
+
+function umount_newroot {
+    umount /tmp/newroot_overlay/tmp/oldroot/tmp
+    umount /tmp/newroot_overlay/tmp/oldroot
+    umount /tmp/newroot_overlay/tmp
+    umount /tmp/newroot_overlay/sys
+    umount /tmp/newroot_overlay/proc
+    umount /tmp/newroot_overlay/dev
+    umount /tmp/newroot_overlay/rom
+    umount /tmp/newroot_overlay
+    umount /tmp/newroot
+    run_mount_cleanup=0
+}
+
+function usage {
+    echo "usage: $0 iopu [opts] "
+    echo ""
+    echo "opts:"
+    echo ""
+    echo "	-n	Do not do the final reboot of the target board"
+    echo "	-c	Keep configuration"
+    echo "	-x	Force install even if firmware is not for this board"
+    echo "	-b	Force install of bootloader regardless of version installed"
+    echo "	-r	Jump into chroot env of other system"
+}
+
+###############################################################################
+
+# just one instance
+# this check has to be done before we install handler to avoid removing the
+# lock even if it was not available.
+if  ! lock -n /tmp/iopu.lock
+then
+    echo "Another instance of iopu already running"
+    echo "If you are sure this is wrong remove file /tmp/iopu.lock"
+    exit 1
+fi
+
+trap finish EXIT
+trap timeout SIGALRM
+trap sig_pipe SIGPIPE
+
+while getopts "nrxb" opt; do
+    case $opt in
+	n)
+	    upd_noreboot=1
+	    ;;
+	x)
+	    upd_forceimage=1
+	    ;;
+	b)
+	    upd_forceboot=1
+	    ;;
+	r)
+	    upd_vol=$(get_flashbank_next)
+	    mount_newroot
+	    (ENV=/sbin/iopu_chroot_env chroot /tmp/newroot_overlay /bin/sh)
+	    echo ""
+	    umount_newroot
+	    exit 0
+	    ;;
+	h)
+	    upd_usage
+	    exit 1
+	    ;;
+    esac
+done
+
+# put a timeout on this if it takes longer than 120 seconds we should abort
+# and clean up
+(
+sleep 120	# if 2 minutes pass
+kill -ALRM $$	2>/dev/null # send it a SIGALRM signal
+)&
+TIMEOUT_PID=$!
+
+log "Firmware upgrade started"
+
+# Should board name be checked
+if [ $upd_forceimage -eq 0 ]
+then
+   board=$(db get hw.board.iopVerBoard)
+   cmdline_match="board=$board"
+fi
+
+# find out what rootfs volume is active. 
+cur_vol=$(get_flashbank_current)
+upd_vol=$(get_flashbank_next)
+
+# convert volume name "rootfs_$upd_vol" into ubifs volume id
+upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
+log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
+
+# prepare to match dsl.
+function_call upd_conf_dsl
+
+# prepare to update CFE if it exists
+function_call upd_conf_cfe
+
+# prepare to update kernel if it is stored in MTD/JFFS2 
+function_call upd_conf_kernel
+
+log "now starting writing data to flash with [ iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id ]"
+run_cleanup=1	# When we start to actually write data there might be some
+		# things that need cleanup if we get an error/crash
+iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id
+
+# in case of any error we abort
+if [ $? -ne 0 ]; then
+    log "iopupgrade program Failed"
+    exit 1
+fi
+
+log "Firmware programmed to flash."
+
+
+log "Transfering configuration to new system."
+
+# Force upgrade of boot loader
+[ $upd_forceboot -eq 1 ] && chroot_cmdline="$chroot_cmdline -b"
+
+mount_newroot
+chroot /tmp/newroot_overlay /sbin/iopu_chroot $chroot_cmdline
+umount_newroot
+
+log "Update fully installed."
+run_cleanup=0
+
+# Now make sure that we actually boot the new system on the next reboot
+upd_finnish
+
+# spawn the reboot to a subshell to allow the main program to quit before reset
+# to avoid any hanged network connection like ssh
+if [ $upd_noreboot -eq 0 ]
+then
+    (
+	log_stdout=0	# stdin,stdout,stderr do not exist anymore, we are in a
+			# subshell and then the trap is no longer working.
+	sleep 1
+	log "Rebooting NOW!!!"
+	log ""
+	reboot
+    )&
+    log "Reboot initiated"
+else
+    log "Skipping reboot"
+fi
+
+
+
+
+
+
+

iopupgrade/files/sbin/iopu_chroot

@@ -0,0 +1,61 @@
+#!/bin/sh
+#
+# This program is intended to be run in a chroot environment where the old system
+# is mounted in /tmp/oldroot
+#
+
+
+###############################################################################
+# Global variables. can be used directly in any function called.
+
+
+###############################################################################
+# file local variables. should not be used in imported functions. Can be used
+# by functions declared in this script
+upd_forceboot=0
+log_stdout=1		# set to 0 to prevent the log to also print to stdout
+
+###############################################################################
+# import external functions
+
+source /lib/upgrade/iopsys.sh
+[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
+
+
+# only call function if it exists
+function_call() {
+    if type "$1" 2>/dev/null >/dev/null
+    then
+	$1 $@
+    fi
+}
+# Cleanup and error handling functions.
+function log {
+    TIME=$(date)
+    [ $log_stdout -eq 1 ] && echo "$@"
+    echo "[$TIME] $@" >>/root/upd_log
+}
+
+
+while getopts "hb" opt; do
+    case $opt in
+	h)
+	    upd_usage
+	    exit 1
+	    ;;
+	b)
+	    upd_forceboot=1
+	    ;;
+	\?)
+	    echo "Invalid option: -$OPTARG" >&2
+	    exit 1
+	    ;;
+    esac
+done
+
+# copy old install log over
+cp /tmp/oldroot/tmp/upd_log /root/upd_log
+
+# Upgrade boot loader if needed.
+function_call upd_program_boot
+

iopupgrade/files/sbin/iopu_chroot_env

@@ -0,0 +1,18 @@
+#!/bin/sh
+# this is run when "iopr -r" is executed.
+# intended to just show what environment is actually started.
+
+cat /etc/banner
+
+echo "/tmp/oldroot:"
+echo "	Contains the running root filesystem. It is live so files are in use"
+echo "	Anything copying/reading files from there needs to make sure it is done safely."
+echo ""
+
+Color_Off='\033[0m'       # Text Reset
+Red='\033[0;31m'          # Red
+
+PS1="${Red}chroot_new${Color_Off}:\w\#"
+export PS1
+export Red
+export Color_Off

iup/Makefile

@@ -0,0 +1,36 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=iup
+PKG_VERSION:=0.0.1
+PKG_RELEASE:=0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/iup
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=iup client
+  DEPENDS:=+libuci +uci +busybox
+endef
+
+define Package/iup/description
+	This package contains Inteno's IUP Client
+endef
+
+define Build/Compile
+	true
+endef
+
+define Package/iup/install
+	$(INSTALL_DIR) $(1)/sbin
+	cp -r ./files/*  $(1)/
+endef
+
+$(eval $(call BuildPackage,iup))

iup/files/etc/config/provisioning

@@ -0,0 +1,17 @@
+package 'provisioning'
+
+config 'general' 'polling'
+        option 'enabled' 'on'
+        option 'starttime' '03'
+        option 'interval' 'daily'
+
+config 'server' 'configserver'
+        option enabled 'off'
+
+
+config 'server' 'iup'
+        option 'enabled' 'on'
+
+config software 'uppgradeserver'
+        option enabled 'off'
+