Ticket#460: Update get and operate command in uspd

Description:
 - First draft of the changes

Test Done:
 - Below ubus call tested
   ubus call usp get '{"path":"Device.WiFi.SSID.[BSSID==\"00:22:07:6D:5E:DD\"].SSID"}'
   ubus call usp get '{"path":"Device.IP.Interface.*.IPv4Address.*.IPAddress"}'
   ubus call usp get '{"path":"Device.WiFi.AccessPoint.[SSIDReference+BSSID==\"00:22:07:6D:5E:DD\"].SSID"}'
   ubus call usp set '{"path":"Device.WiFi.AccessPoint.[SSIDReference+BSSID==\"00:22:07:6D:5E:D\"].SSID", "value":"Test-2G"}'

Not Covered:
 - Operate command
 - Alias based addressing
 - Searching with List of References

catv/files/etc/config/catv

@@ -1,4 +1,4 @@
 
 config service 'catv'
-        option enable '0'
+        option enable 'no'
         option filter '3'

dslmngr/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2018 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=dslmngr
+PKG_VERSION:=1.0.0
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=be5b0d0c0a1c2abd335aaf19f01f63284d8cc285
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+  TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
+else
+  $(info Unexpected CONFIG_TARGET)
+endif
+
+export TARGET_PLATFORM
+
+define Package/dslmngr
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=XDSL status and configration utility
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +easy-soc-libs
+endef
+
+define Package/dslmngr/description
+ This package can be used to configure and provide status about
+ the XDSL subsystem through UBUS.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-D_GNU_SOURCE
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS)" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Build/Compile
+	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
+endef
+
+define Package/dslmngr/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dslmngr))

easy-qos/Makefile

@@ -0,0 +1,37 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-qos
+PKG_VERSION:=1.0
+PKG_RELEASE:=0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-qos
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Easy QoS
+endef
+
+define Package/easy-qos/description
+	This package contains Easy QoS utitie
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/easy-qos/install
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
+endef
+
+$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -0,0 +1 @@
+/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+log() {
+	echo "${@}"|logger -t easy_qos.ebtable -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	while [ -n "${rule}" ]; do
+		exec_log ebtables -t broute -D BROUTING ${rule}
+		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	done
+}
+
+create_rule() {
+	local protocol=$1; shift
+	local mac=$1; shift
+	local mark="0x$1"; shift
+	local forward_port=$1;
+	local cmd="";
+	local protocol_number
+
+	cmd="-j mark --mark-or ${mark}";
+	if [ -n "${forward_port}" ]; then
+		cmd="--ip-destination-port ${forward_port} ${cmd}";
+	fi
+	
+	case "${protocol}" in
+		"tcp")
+			protocol_number=6;;
+		"udp")
+			protocol_number=17;;
+		"dccp")
+			protocol_number=33;;
+		"sctp")
+			protocol_number=132;;
+		*)
+			log "Protocol ${protocol} not supported in ebtables"
+			return;;
+	esac
+			
+	cmd="--ip-proto ${protocol_number} $cmd"
+	cmd="-p ip $cmd"
+
+	cmd="-s ${mac} $cmd"
+	exec_log ebtables -t broute -A BROUTING ${cmd}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num protocol
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	protocol=$(echo ${proto}|tr [A-Z] [a-z])
+	prio_num=$(get_priority ${priority})
+	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
+		for p in ${port}; do
+			if [ "${protocol}" == "none" ]; then
+				create_rule tcp ${macaddr} ${prio_num} ${p}
+				create_rule udp ${macaddr} ${prio_num} ${p}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
+			fi
+		done
+		# Create rule for all ports if port is not mentioned in uci
+		if [ -z "${port}" ]; then
+			if [ "${protocol}" == "none" ]; then
+				create_rule tcp ${macaddr} ${prio_num}
+				create_rule udp ${macaddr} ${prio_num}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	# Do not apply rules if ebtables is not present in system
+	[ -x /usr/sbin/ebtables ] || return;
+
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+}
+
+start_service() {
+	reload_service
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -0,0 +1,186 @@
+#!/bin/sh /etc/rc.common
+
+. /usr/share/libubox/jshn.sh
+
+START=99
+USE_PROCD=1
+
+CLIENT_LIST="/tmp/easy_qos_client.list"
+
+log() {
+	echo "${@}"|logger -t easy_qos -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+#	json_add_array "clients"
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}"
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
+	done
+}
+
+check_and_create() {
+	iptables -t mangle -C OUTPUT ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A OUTPUT ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark="0x$1/0x$1"; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j MARK --set-xmark ${mark}";
+	if [ -n "${ports}" ]; then
+		cmd="--match multiport --dports ${ports} ${cmd}";
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd} 
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num ip port_list
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	ip=$(get_ipaddress ${macaddr})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+
+	if [ -n "${ip}" -a -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" ]; then
+			create_rule tcp ${ip} ${prio_num} ${port_list}
+			create_rule udp ${ip} ${prio_num} ${port_list}
+		else
+			create_rule ${proto} ${ip} ${prio_num} ${port_list}
+		fi
+	fi
+}
+
+reload_service() {
+	clear_existing_rules
+	map_client_entries
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	reload_service
+	echo "Easy QoS installed">/dev/console;
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -0,0 +1,10 @@
+# Add firewall include
+uci -q batch <<-EOT
+        delete firewall.easyqos
+        set firewall.easyqos=include
+        set firewall.easyqos.path=/etc/firewall.easyqos
+        set firewall.easyqos.reload=1
+	uci del_list firewall.easyqos._access_w="root"
+	uci add_list firewall.easyqos._access_w="root"
+        commit firewall
+EOT

easy-soc-libs/Config.in

@@ -15,5 +15,9 @@ config LIBDSL_DEBUG
 	bool "Enable xdsl debugging"
 	default n
 
+config LIBDSL_TEST
+	depends on PACKAGE_libdsl
+	bool "Libdsl test program"
+	default n
 endmenu
 endif

easy-soc-libs/Makefile

@@ -8,12 +8,15 @@ PKG_NAME:=easy-soc-libs
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=6a311af7cd17fc410c27de3cfae33b658195fd0b
+PKG_SOURCE_VERSION:=6bd703870262eca9ccbd8c4937c41fe842828ae3
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
-
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+endif
+
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
@@ -34,26 +37,24 @@ endef
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-endef
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
+  DEPENDS+=+TARGET_intel_mips:libnl +TARGET_intel_mips:libnl-route
 endef
 
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS:=+TARGET_iopsys_ramips:swconfig
+  DEPENDS+=+TARGET_iopsys_ramips:swconfig
 endef
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
   KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
   TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
@@ -64,13 +65,21 @@ else ifeq ($(CONFIG_TARGET_intel_mips),y)
   TARGET_PLATFORM=INTEL
   TARGET_CFLAGS +=-DIOPSYS_INTEL
 else
-  $(info (UNEXPECTED CONFIG TARGET))
+  $(info Unexpected CONFIG_TARGET)
 endif
 
+export TARGET_PLATFORM
+
 ifdef CONFIG_IOP_LLA_LIBS_DEBUG
   TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
 endif
 
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= XDSL library (libdsl)
+  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi
+endef
+
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
 	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
@@ -78,15 +87,22 @@ subdirs := \
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
 	-I$(STAGING_DIR)/usr/include/libnl3
 
 MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
 	subdirs="$(subdirs)"
 
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
+endef
+endif
+
 define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
@@ -108,6 +124,12 @@ define Build/InstallDev/libethernet
 	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
 endef
 
+define Build/Compile
+	$(call Build/Compile/Default)
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endif
+endef
 
 define Build/InstallDev
 	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
@@ -125,7 +147,11 @@ endef
 
 define Package/libdsl/install
 	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
 	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
 endef
 
 $(eval $(call BuildPackage,libwifi))

endptmngr/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
 PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=a78fe95d5c5a0a320f3b62b9d2faafd07b56e3a7
+PKG_SOURCE_VERSION:=44e2472e8c08bef01fab27e8e908d5672f7af136
 
 
 ifeq ($(CONFIG_ENDPT_OPEN),y)

gryphon-led-module/Makefile

@@ -0,0 +1,62 @@
+# Copyright (c) 2017 Genexis B.V.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=gryphon-led-kernel-module
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/$(PKG_NAME)
+  SUBMENU:=LED modules
+  TITLE:=LED driver for Gryphon
+  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
+  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
+  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
+  PKG_LICENSE:=Genexis
+  PKG_LICENSE_URL:=
+endef
+
+define KernelPackage/$(PKG_NAME)/description
+  This package contains the LED driver for Gryphon devices.
+endef
+
+EXTRA_KCONFIG:= CONFIG_RGB_LED=m
+
+MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
+	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
+	$(CP) src/* $(PKG_BUILD_DIR)
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(LINUX_DIR)" \
+		CROSS_COMPILE="$(TARGET_CROSS)" \
+		ARCH="$(LINUX_KARCH)" \
+		SUBDIRS="$(PKG_BUILD_DIR)" \
+		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
+		modules
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+endef
+
+$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -0,0 +1,26 @@
+# Copyright (c) 2017 Genexis B.V.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+MODULE_NAME  = gryphon-led-kernel-module
+
+obj-m  := $(MODULE_NAME).o
+
+GENEXIS_FILES= \
+	main.o \
+	sk9822.o \
+	sk9822_bitbang.o
+
+$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#define DEBUG 1
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/version.h>
+
+#include "sk9822.h"
+
+#define DRIVER_NAME			"canyon_led"
+#define DRIVER_AUTHOR		"Genexis B.V."
+#define DRIVER_DESC			"Canyon LED driver for SK9822"
+#define DRIVER_VERSION	"1"
+
+/**
+ * sysfs interfaces
+ */
+
+static ssize_t get_led_color(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	/* [ln] todo: dummy implementation */
+	int len;
+
+	len = sprintf(buf, "%d\n", 123);
+	if (len <= 0) {
+		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
+	}
+
+	return len;
+}
+
+/**
+ * @brief Set complete LED strip to a specific color
+ * @retval count number of bytes written
+ * @retval -EMSGSIZE if the message is too big
+ * @retval -EIO for all other errors (e.g. leds cannot be configured)
+ */
+static ssize_t set_led_color(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int ret = 0;
+	size_t buflen = count;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	/* strip newline */
+	if ((count > 0) && (buf[count-1] == '\n')) {
+		buflen--;
+	}
+
+	if (buflen != 6) { // RRGGBB\0
+		return -EMSGSIZE;
+	}
+
+	// Update the LED array here
+	ret = sk9822_set_color_str(sk9822, buf);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to set led color\n");
+		return -EIO;
+	}
+
+	// Now push to the HW
+	ret = sk9822_update(sk9822);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to update led\n");
+		return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
+
+static struct attribute *sk9822_dev_attrs[] = {
+	 &dev_attr_led_color.attr,
+	 NULL
+};
+
+static struct attribute_group sk9822_dev_attr_group = {
+	.name = "sk9822",
+	.attrs = sk9822_dev_attrs,
+};
+
+/**
+ * device prope and removal
+ */
+
+static int canyon_led_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct sk9822_leds *leds;
+
+	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
+	if (!leds) {
+		return -ENOMEM;
+	}
+	leds->dev = &pdev->dev;
+	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
+
+	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
+	if (ret < 0) {
+		dev_warn(&pdev->dev, "Could not read led-count property\n");
+		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
+	}
+
+	leds->led_colors = devm_kzalloc(&pdev->dev,
+			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
+	if (!leds->led_colors) {
+		return -ENOMEM;
+	}
+
+
+	platform_set_drvdata(pdev, leds);
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
+	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
+#else
+	dev_warn(&pdev->dev, "Kernel version Not supported\n");
+	exit(1);
+#endif
+
+	gpiod_direction_output(leds->clock_gpio, 1);
+	if (IS_ERR(leds->clock_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
+				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
+		return PTR_ERR(leds->clock_gpio);
+	} else {
+		printk(KERN_INFO "Got clock gpio\n");
+		gpiod_set_value(leds->clock_gpio, 0);
+	}
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
+	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
+#else
+	dev_warn(&pdev->dev, "Kernel version Not supported\n");
+	exit(1);
+#endif
+
+	gpiod_direction_output(leds->data_gpio, 1);
+	if (IS_ERR(leds->data_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
+				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
+		return PTR_ERR(leds->data_gpio);
+	} else {
+		printk(KERN_INFO "Got data gpio\n");
+		gpiod_set_value(leds->data_gpio, 0);
+	}
+
+	printk(KERN_INFO "Attempt to set filefs stuff\n");
+	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
+	if (ret) {
+		dev_err(&pdev->dev, "sysfs creation failed\n");
+		return ret;
+	}
+
+#if 0
+	printk(KERN_INFO "Flash LEDs to verify they work\n");
+	sk9822_set_color_str(leds, "00FF00");
+	sk9822_update(leds);
+	msleep(200);
+#endif
+	sk9822_set_color_str(leds, "000000");
+	sk9822_update(leds);
+
+	printk(KERN_INFO "canyon led successfully probed\n");
+
+	return 0;
+}
+
+static int canyon_led_remove(struct platform_device *pdev)
+{
+	struct sk9822_leds *leds;
+
+	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
+
+	leds = platform_get_drvdata(pdev);
+	if (IS_ERR(leds)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -1;
+	}
+
+	if (leds->clock_gpio) {
+		gpiod_put(leds->clock_gpio);
+	}
+
+	if (leds->data_gpio) {
+		gpiod_put(leds->data_gpio);
+	}
+
+	printk(KERN_NOTICE "Bye, bye\n");
+
+	return 0;
+}
+
+/**
+ * platform driver metadata
+ */
+
+static const struct of_device_id canyon_led_of_ids[] = {
+	{ .compatible = "canyon,led" },
+	{ }
+};
+
+static struct platform_driver canyon_led = {
+	.probe = &canyon_led_probe,
+	.remove = &canyon_led_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = canyon_led_of_ids,
+	},
+};
+
+MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
+module_platform_driver(canyon_led);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include "sk9822.h"
+#include "sk9822_bitbang.h"
+
+cRGB __hexs_to_rgb(const char *hex)
+{
+	cRGB rgb;
+	int r, g, b;
+
+	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
+	// This needs sanity checking
+	rgb.r = r;
+	rgb.g = g;
+	rgb.b = b;
+	return rgb;
+}
+
+/**
+ * @brief update the color over the given device struct to the provided HEX color
+ */
+int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
+{
+	int i;
+	cRGB color = __hexs_to_rgb(hex);
+
+	for (i = 0; i < sk9822->led_count; i++) {
+		sk9822->led_colors[i] = color;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief write device struct to the device
+ */
+int sk9822_update(struct sk9822_leds *sk9822)
+{
+	uint16_t i;
+	uint16_t led_count = sk9822->led_count;
+
+	// Start Frame
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+
+	for (i = 0; i < led_count; i++) {
+		cRGB *p = &sk9822->led_colors[i];
+		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
+		sk9822_bb_write(sk9822, p->b);
+		sk9822_bb_write(sk9822, p->g);
+		sk9822_bb_write(sk9822, p->r);
+	}
+
+	// End frame
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+
+	return 0;
+}

gryphon-led-module/src/sk9822.h

@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef SK9822_H_
+#define SK9822_H_
+
+#include <linux/types.h>
+
+#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
+#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
+
+typedef struct {
+	uint8_t b;
+	uint8_t g;
+	uint8_t r;
+} cRGB;   // BGR (SK9822 Standard)
+
+struct sk9822_leds {
+	struct device *dev;
+	struct gpio_desc *clock_gpio;
+	struct gpio_desc *data_gpio;
+
+	cRGB *led_colors;
+	uint8_t led_brightness;
+	uint16_t led_count;
+};
+
+int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
+int sk9822_update(struct sk9822_leds *sk9822);
+
+#endif /* SK9822_H_ */

gryphon-led-module/src/sk9822_bitbang.c

@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include "sk9822.h"
+
+/**
+ * @brief Bitbang write operation CLOCK+DATA
+ *
+ * Assumed state before call: CLOCK- Low, DATA- High
+ */
+void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
+{
+	uint8_t i;
+
+	for (i = 0; i < 8 ; i++) {
+		if (!(c&0x80)) {
+			gpiod_set_value(sk9822->data_gpio, 0); // set data low
+		} else {
+			gpiod_set_value(sk9822->data_gpio, 1); // set data high
+		}
+
+		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
+		c <<= 1;
+		udelay(1); // stretch clock
+		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
+	}
+
+	// State after call: SCK Low, Data high
+}

gryphon-led-module/src/sk9822_bitbang.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _SK9822_BB_H_
+#define _SK9822_BB_H_
+
+#include <linux/types.h>
+
+#include "sk9822.h"
+
+void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
+
+#endif /* _SK9822_BB_H_ */

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-04-25
+PKG_VERSION:=4.0-2019-04-05
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=cd777bbd2dbe7477ec7665f12d3d20e6b2e9e052
+PKG_SOURCE_VERSION:=f7e8cee5bcc578cc9bb9307e31d0c057676a377c
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -51,6 +51,13 @@ define Package/icwmp_xmpp
 	DEPENDS:=+libuci +libubox +libexpat +libstrophe
 endef
 
+define Package/icwmp_udpechoserver
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 udpechoserver feature
+	DEPENDS:=+libuci
+endef
+
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
@@ -203,6 +210,15 @@ define Package/icwmp_xmpp/install
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
 endef
 
+define Package/icwmp_udpechoserver/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
+endef
+
 define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
@@ -238,4 +254,5 @@ $(eval $(call BuildPackage,icwmp-curl))
 $(eval $(call BuildPackage,libdatamodel))
 $(eval $(call BuildPackage,icwmp_stun))
 $(eval $(call BuildPackage,icwmp_xmpp))
+$(eval $(call BuildPackage,icwmp_udpechoserver))
 $(eval $(call BuildPackage,icwmp-zstream))

imonitor/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 Inteno
+# Copyright (C) 2018 iopsys
 #
 
 include $(TOPDIR)/rules.mk
@@ -15,7 +15,6 @@ PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
 PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 
@@ -24,7 +23,7 @@ include $(INCLUDE_DIR)/cmake.mk
 
 define Package/imonitor
 	CATEGORY:=Utilities
-	TITLE:=Inteno process supervisor
+	TITLE:=iopsysWrt process supervisor
 	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
 endef
 

inbd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2016 Inteno
+# Copyright (C) 2016 iopsys
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=12755fccb8ef87965ac684d62d56e19e73a255bd
+PKG_SOURCE_VERSION:=665a72a6bb2b5ea5a17ad6248957fe35525b3782
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 
@@ -34,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/inbd
 	CATEGORY:=Utilities
-	TITLE:=Inteno Netlink Bridge Daemon
+	TITLE:=iopsys Netlink Bridge Daemon
 	URL:=
 	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
 endef

iop/Makefile

@@ -20,7 +20,7 @@ define Package/iop
 endef
 
 define Package/iop/description
-	This package contains Intenos Iop utilities
+	This package contains iopsysWrt SDK utilities
 endef
 
 define Build/Compile

iop/config

@@ -3,11 +3,9 @@ CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
-# CONFIG_LOCALMIRROR is not set
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
-CONFIG_PACKAGE_6tunnel=y
 CONFIG_PACKAGE_alsa-lib=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
@@ -17,56 +15,35 @@ CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
 CONFIG_PACKAGE_gdb=m
-CONFIG_PACKAGE_gdbserver=m
 CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_glib2=y
-CONFIG_PACKAGE_ice-client=y
-CONFIG_PACKAGE_ice-client-camerawatch=m
-CONFIG_PACKAGE_ice-client-fileme=m
-CONFIG_PACKAGE_ice-client-gigaset=m
-CONFIG_PACKAGE_ice-client-guest=m
-CONFIG_PACKAGE_ice-client-iperf=m
-CONFIG_PACKAGE_ice-client-logreader=m
-CONFIG_PACKAGE_ice-client-monitor=m
-CONFIG_PACKAGE_ice-client-netrounds=m
-CONFIG_PACKAGE_ice-client-rshell=m
-CONFIG_PACKAGE_ice-client-texec=m
 CONFIG_PACKAGE_icwmp-curl=y
 CONFIG_PACKAGE_ifbt=y
 CONFIG_PACKAGE_imonitor=y
 CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_netmode=y
-CONFIG_PACKAGE_iperf-mt=y
+CONFIG_PACKAGE_iopupgrade=y
+CONFIG_PACKAGE_ip-full=y
+CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y
 CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
-CONFIG_PACKAGE_iup=y
 # CONFIG_PACKAGE_iwatchdog is not set
 CONFIG_PACKAGE_juci=y
-CONFIG_PACKAGE_juci-broadcom-iptv=y
-CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
-CONFIG_PACKAGE_juci-wifilife=y
-CONFIG_PACKAGE_juci-wireless=y
+CONFIG_PACKAGE_juci-config-backup=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
 CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
 CONFIG_PACKAGE_juci-dropbear=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
-CONFIG_PACKAGE_juci-ice-client=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
-CONFIG_PACKAGE_juci-config-backup=y
-CONFIG_PACKAGE_juci-mwan3=y
-CONFIG_PACKAGE_juci-iup=y
-# CONFIG_PACKAGE_juci-qos is not set
-CONFIG_PACKAGE_juci-voice-client=y
-CONFIG_PACKAGE_juci-macdb=y
 CONFIG_PACKAGE_juci-minidlna=y
 CONFIG_PACKAGE_juci-mod-status=y
 CONFIG_PACKAGE_juci-mod-system=y
+CONFIG_PACKAGE_juci-mwan3=y
 CONFIG_PACKAGE_juci-natalie-dect=y
 CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-device=y
@@ -75,24 +52,20 @@ CONFIG_PACKAGE_juci-network-netifd=y
 CONFIG_PACKAGE_juci-network-port=y
 CONFIG_PACKAGE_juci-openvpn=y
 CONFIG_PACKAGE_juci-owsd=y
-CONFIG_PACKAGE_juci-printer=y
 CONFIG_PACKAGE_juci-realtime-graphs=y
 CONFIG_PACKAGE_juci-samba=y
-CONFIG_PACKAGE_juci-simple-gui=y
 CONFIG_PACKAGE_juci-snmpd=y
 CONFIG_PACKAGE_juci-sysupgrade=y
-CONFIG_PACKAGE_juci-theme-iopsys=y
-CONFIG_PACKAGE_juci-ubus-core=y
 CONFIG_PACKAGE_juci-upnp=y
 CONFIG_PACKAGE_juci-usb=y
-CONFIG_PACKAGE_juci-utils=y
-# CONFIG_PACKAGE_kmod-ipt-nathelper is not set
-CONFIG_PACKAGE_kmod-nls-base=y
+CONFIG_PACKAGE_juci-voice-client=y
+CONFIG_PACKAGE_juci-wifilife=y
+CONFIG_PACKAGE_juci-wireless=y
+CONFIG_PACKAGE_juci-theme-iopsys=y
 CONFIG_PACKAGE_kmod-siit=y
 CONFIG_PACKAGE_libcgroup-daemon=y
 CONFIG_PACKAGE_libcgroup=y
 # CONFIG_PACKAGE_libcgroup-utils is not set
-CONFIG_PACKAGE_ldd=y
 CONFIG_PACKAGE_libdaemon=y
 CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
@@ -100,14 +73,10 @@ CONFIG_PACKAGE_libreadline=y
 CONFIG_PACKAGE_loop-detector=m
 CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
-CONFIG_PACKAGE_mtd-utils=y
-CONFIG_PACKAGE_mtd-utils-deubinize=y
-CONFIG_PACKAGE_mtd-utils-imagewrite=y
-CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
-CONFIG_PACKAGE_mtd-utils-nanddump=y
 CONFIG_PACKAGE_mwan3=y
 CONFIG_PACKAGE_nand-utils=y
 CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
 CONFIG_PACKAGE_odhcp6c=y
@@ -116,7 +85,6 @@ CONFIG_PACKAGE_openssl-util=y
 CONFIG_OPENSSL_WITH_COMPRESSION=y
 CONFIG_PACKAGE_openvpn-easy-rsa=y
 CONFIG_PACKAGE_openvpn-openssl=y
-# CONFIG_PACKAGE_p910nd is not set
 CONFIG_PACKAGE_peripheral_manager=y
 CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
@@ -187,7 +155,6 @@ CONFIG_BUSYBOX_CONFIG_MICROCOM=y
 # CONFIG_BUSYBOX_CONFIG_RMMOD is not set
 CONFIG_BUSYBOX_CONFIG_STTY=y
 CONFIG_BUSYBOX_CONFIG_TFTP=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
@@ -201,11 +168,9 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
 # CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY is not set
 # CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
@@ -215,7 +180,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
 # CONFIG_BUSYBOX_CONFIG_NTPD is not set
-# CONFIG_BUSYBOX_CONFIG_FEATURE_NTPD_SERVER is not set
 CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
@@ -224,7 +188,6 @@ CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_SIGNED_PACKAGES is not set
 CONFIG_KERNEL_DEVTMPFS=y
 CONFIG_KERNEL_DEVTMPFS_MOUNT=y
-CONFIG_PACKAGE_ip-full=y
 # CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_PACKAGE_iopupgrade=y
+LOCAL_MIRROR="http://download.iopsys.eu/iopsys/mirror/"
 

iop/scripts/feeds_update.sh

@@ -32,13 +32,15 @@ function feeds_update {
     fi
 
     # targets need to be installed explicitly
-    ./scripts/feeds install -p targets iopsys-brcm63xx-mips
-    ./scripts/feeds install -p targets iopsys-brcm63xx-arm
-    ./scripts/feeds install -p targets iopsys-ramips
-    ./scripts/feeds install -p intel_targets intel_mips
+    targets="iopsys-brcm63xx-mips iopsys-brcm63xx-arm iopsys-ramips intel_mips"
+    for target in $targets
+    do
+	rm -f target/linux/$target
+	./scripts/feeds install -p targets $target
+    done
 
     # install all packages
-    ./scripts/feeds install -a 
+    ./scripts/feeds install -a
 
     # remove broken symlinks ( for packages that are no longer in the feed )
     find -L package/feeds -maxdepth 2 -type l -delete
@@ -47,7 +49,7 @@ function feeds_update {
     make defconfig
 
     # record when we last run this script
-    touch tmp/.iop_bootstrap 
+    touch tmp/.iop_bootstrap
 
     # always return true
     exit 0

iop/scripts/genconfig.sh

@@ -12,39 +12,99 @@ function genconfig {
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
 	export DEVELOPER=0
-	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
-
 	target="bogus"
 	config_path=""
+	brcm63xx_mips="target/linux/iopsys-brcm63xx-mips"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	intel_mips="target/linux/intel_mips"
+
+	Red='\033[0;31m'          # Red
+	Color_Off='\033[0m'       # Text Reset
+	Yellow='\033[0;33m'       # Yellow
+
+	function find_last {
+	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
+	}
+
+	function is_new {
+	    for opt in $conf_warned
+	    do
+		if [ "$opt" == "$1" ]
+		then
+		    return 1
+		fi
+	    done
+	    # option not found return true
+	    return 0
+	}
+
+	function verify_config {
+	    IFS=$'\n'
+	    org=$(<.genconfig.config)
+	    unset IFS
+	    local num
+	    local conf_opt
+	    local conf_org
+	    local conf_new
+
+	    #echo "lines to check $tot_lines"
+	    num=0
+	    for line in $org
+	    do
+		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
+		if [ -n "${conf_opt}" ]
+		then
+		    conf_org=$(find_last ${conf_opt} .genconfig.config)
+		    conf_new=$(find_last ${conf_opt} .config)
+		    if [ "$conf_org" != "$conf_new" ]
+		    then
+			if is_new $conf_opt
+			then
+			    echo -e "config option [${Red}$conf_opt${Color_Off}] is not set correctly in .config"
+			    echo -e "got value [${Yellow}$conf_new${Color_Off}] but wanted [${Yellow}$conf_org${Color_Off}]"
+			    echo "This is a real problem somebody needs to investigate"
+			    echo ""
+			    conf_warned="$conf_warned $conf_opt"
+			fi
+		    else
+			true
+			# for debug to see all options
+			#echo -e "wanted [$conf_org] got [$conf_new]"
+		    fi
+		fi
+		num=$((num+1))
+	    done
+	}
 
 	# Takes a board name and returns the target name in global var $target
 	set_target() {
 	    local profile=$1
 
-	    local iopsys_brcm63xx_mips=$(cd target/linux/iopsys-brcm63xx-mips; ./genconfig)
-	    local iopsys_brcm63xx_arm=$(cd target/linux/iopsys-brcm63xx-arm; ./genconfig)
-	    local iopsys_ramips=$(cd target/linux/iopsys-ramips; ./genconfig)
-	    local intel_mips=$(cd target/linux/intel_mips; ./genconfig)
 
-	    if [ "$profile" == "LIST" ]
-	    then
-		for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips intel_mips
-		do
-		    echo "$list based boards:"
-		    for b in ${!list}
-		    do
-			echo -e "\t$b"
-		    done
-		done
-		return
+		[ -e $brcm63xx_mips/genconfig ] &&
+			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
+		[ -e $brcm63xx_arm/genconfig ] &&
+			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
+		[ -e $ramips/genconfig ] &&
+			iopsys_ramips=$(cd $ramips; ./genconfig)
+		[ -e $intel_mips/genconfig ] &&
+			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
+
+	    if [ "$profile" == "LIST" ]; then
+			for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips; do
+				echo "$list based boards:"
+				for b in ${!list}; do
+					echo -e "\t$b"
+				done
+			done
+			return
 	    fi
 
-	    local targets
-
 	    for p in $iopsys_brcm63xx_mips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_mips"
-			config_path="target/linux/iopsys-brcm63xx-mips/config"
+			config_path="$brcm63xx_mips/config"
 		    return
 		fi
 	    done
@@ -52,7 +112,7 @@ function genconfig {
 	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_arm"
-			config_path="target/linux/iopsys-brcm63xx-arm/config"
+			config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
@@ -60,15 +120,15 @@ function genconfig {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
-			config_path="target/linux/iopsys-ramips/config"
+			config_path="$ramips/config"
 		    return
 		fi
 	    done
 
-	    for p in $intel_mips; do
+	    for p in $iopsys_intel_mips; do
 		if [ $p == $profile ]; then
 		    target="intel_mips"
-			config_path="target/linux/intel_mips/config"
+			config_path="$intel_mips/config"
 		    return
 		fi
 	    done
@@ -85,17 +145,12 @@ function genconfig {
 		mediatekAllowed=0
 		wifilifeAllowed=0
 
-		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
-		for repo in $allowedRepos; do
-			case $repo in
-			bcmkernel) bcmAllowed=1 ;;
-			ice-client) iceAllowed=1 ;;
-			endptcfg) endptAllowed=1 ;;
-			natalie-dect*) natalieAllowed=1 ;;
-			linux) mediatekAllowed=1 ;;
-			wifilife) wifilifeAllowed=1 ;;
-			esac
-		done
+		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
+		git ls-remote git@dev.iopsys.eu:mediatek/linux.git -q 2>/dev/null && mediatekAllowed=1
+		git ls-remote git@dev.iopsys.eu:dialog/natalie-dect-12.26.git -q 2>/dev/null && natalieAllowed=1
+		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
+		git ls-remote git@dev.iopsys.eu:iopsys/wifilife.git -q 2>/dev/null && wifilifeAllowed=1
+		git ls-remote git@private.inteno.se:ice-client.git -q -q 2>/dev/null && iceAllowed=1
 	}
 
 	v() {
@@ -106,14 +161,15 @@ function genconfig {
 		echo
 		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
 		echo
-		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\tVerbose"
+		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
+		echo -e "  -v|--verbose\t\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -s|--override\tEnable 'Package source tree override'"
-		echo -e "  -h|--help\tShow this message"
+		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
+		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
+		echo -e "  -h|--help\t\tShow this message"
 		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\tList all Customers and their board types"
-		echo -e "  -b|--boards\tList all board types"
+		echo -e "  -a|--list-all\t\tList all Customers and their board types"
+		echo -e "  -b|--boards\t\tList all board types"
 		echo
 		echo "Example ./iop genconfig vg50 TELIA"
 		echo "(if no customerconfig is chosen the Inteno Config will be used)"
@@ -176,7 +232,7 @@ function genconfig {
 
 	setup_dirs()
 	{
-		if ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -qw ${CUSTREPO:22}; then
+		if git ls-remote $CUSTREPO -q 2>/dev/null; then
 			if [ ! -d "$CUSTPATH" ]; then
 				git clone "$CUSTREPO" "$CUSTPATH"
 			elif [ $IMPORT -eq 1 ]; then
@@ -306,7 +362,7 @@ function genconfig {
 			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
 			[ $wifilifeAllowed -eq 0 ] && echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		else
-			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
+			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
 			echo "CONFIG_ICE_OPEN=y" >> .config
 			echo "CONFIG_ENDPT_OPEN=y" >> .config
@@ -315,6 +371,11 @@ function genconfig {
 			echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		fi
 
+		if [ -n "$BRCM_MAX_JOBS" ]
+		then
+		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
+		fi
+
 		# Force regeneration of themes
 		touch package/feeds/juci/juci/Makefile
 
@@ -327,6 +388,9 @@ function genconfig {
 		# so just touch that file.
 		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
 
+		# Store generated config
+		cp .config .genconfig.config
+
 		# Set default values based on selected parameters
 		v "$(make defconfig 2>&1)"
 
@@ -334,6 +398,8 @@ function genconfig {
 
 		# Clean base-file package to force rebuild when changing profile
 		v "$(make package/base-files/clean 2>&1)"
+
+		verify_config
 	}
 
 	####### main #####
@@ -358,6 +424,7 @@ function genconfig {
 			-p|--profile) export PROFILE="$2"; shift;;
 			-r|--repo) export CUSTREPO="$2"; shift;;
 			-s|--override) export SRCTREEOVERR=1;;
+			-S|--brcmsingel) export BRCM_MAX_JOBS=1;;
 			-h|--help) usage;;
 			-l|--list) list_customers 0 $2;;
 			-a|--list-all)list_customers 1;;

iop/scripts/install_key.sh

@@ -10,7 +10,7 @@ function install_key {
     echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
     echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
     echo "tty/0::askfirst:/bin/ash --login" >>files/etc/inittab
-    echo "ttyS0::askfirst:/bin/ash --login" >>files/etc/inittab
+    echo "console::askfirst:/bin/cttyhack /bin/ash --login" >>files/etc/inittab
 
     echo Done
 }

iop/scripts/update_feed_branches.sh

@@ -46,7 +46,7 @@ function update_feed_branches {
 		git checkout $commith
 		git push origin :$release
 		git checkout -b $release
-		git push origin $release
+		git push --set-upstream origin $release
 		cd $ipath
 	done
 

iopupgrade/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=iopupgrade
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=9b5ed4bc9f7ac5064414cf5feb510ffd95df6ec4
+PKG_SOURCE_VERSION:=01f2afd6c831d6f9eb2940c7e7af16f7e4d439c2
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopupgrade
 

iopupgrade/files/sbin/iopu

@@ -7,6 +7,7 @@ cur_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
 upd_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
 		# eg: rootfs_0 or rootfs_1, the one we want to update
 cmdline=""	# command line settings.
+cmdline_match="" # Headers to match to the image
 
 ###############################################################################
 # file local variables. should not be used in imported functions. Can be used
@@ -204,9 +205,7 @@ log "Firmware upgrade started"
 if [ $upd_forceimage -eq 0 ]
 then
    board=$(db get hw.board.iopVerBoard)
-   cmdline="$cmdline -b $board"
-else
-    cmdline="$cmdline -q"
+   cmdline_match="board=$board"
 fi
 
 # find out what rootfs volume is active. 
@@ -217,16 +216,19 @@ upd_vol=$(get_flashbank_next)
 upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
 log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
 
+# prepare to match dsl.
+function_call upd_conf_dsl
+
 # prepare to update CFE if it exists
 function_call upd_conf_cfe
 
 # prepare to update kernel if it is stored in MTD/JFFS2 
 function_call upd_conf_kernel
 
-log "now starting writing data to flash with [ iopupgrade $cmdline -u ubi0_$upd_ubi_id ]"
+log "now starting writing data to flash with [ iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id ]"
 run_cleanup=1	# When we start to actually write data there might be some
 		# things that need cleanup if we get an error/crash
-iopupgrade $cmdline -u ubi0_$upd_ubi_id
+iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id
 
 # in case of any error we abort
 if [ $? -ne 0 ]; then

ltq-nand/Makefile

@@ -0,0 +1,33 @@
+#
+# Copyright (C) 2008-2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ltq-nand
+PKG_VERSION:=1.0
+
+PKG_SOURCE:=v$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/archive/
+#PKG_SOURCE_PROTO:=git
+#PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/releases/download/v$(PKG_VERSION)/
+#PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand.git
+#PKG_SOURCE_VERSION:=07b5b0331af6de4174dab2c02bf260ee9625452a
+
+include $(INCLUDE_DIR)/host-build.mk
+
+
+define Host/Compile
+	$(MAKE) -C $(HOST_BUILD_DIR)
+endef
+
+define Host/Install
+	$(CP) \
+		$(HOST_BUILD_DIR)/ltq-nand \
+		$(STAGING_DIR_HOST)/bin/
+endef
+
+$(eval $(call HostBuild))
+

ndt/Makefile

@@ -0,0 +1,33 @@
+#
+# This is free software, See /COPYRIGHT for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ndt
+PKG_VERSION:=3.6.4
+PKG_RELEASE:=3
+
+PKG_BUILD_DIR:=${BUILD_DIR}/ndt-$(PKG_VERSION)
+PKG_SOURCE:=ndt-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://software.internet2.edu/sources/ndt
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ndt
+	CATEGORY:=Utilities
+	DEPENDS:=+libpthread +zlib
+	TITLE:=Network Testing Tool
+endef
+
+define Build/Compile/Default
+	$(MAKE) -C $(PKG_BUILD_DIR)
+endef
+
+define Package/ndt/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(CP) $(PKG_BUILD_DIR)/src/web100clt $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ndt))
+

netmode/files/etc/config/netmode

@@ -4,6 +4,6 @@ config mode 'setup'
         option curmode 'routed'
 
 config tools 'tools'
-	option wificontrol 1
+	option wificontrol 0
 	option arp_discovery 1
 

netmode/files/etc/hotplug.d/iface/01-netmode-handler

@@ -2,6 +2,9 @@
 
 [ "$INTERFACE" != "wan" ] && exit
 
+automode="$(uci -q get netmode.setup.automode)"
+[ "$automode" == "0" ] && exit
+
 . /lib/functions.sh
 . /lib/functions/network.sh
 . /lib/functions/netmode.sh

owsd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 Inteno
+# Copyright (C) 2018 iopsys
 #
 
 include $(TOPDIR)/rules.mk
@@ -13,7 +13,6 @@ PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
 PKG_SOURCE_VERSION:=f0eedeb6fd061edf3784d6bf86fa60b176bf3fe7
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=02903ce5b594420331f80c6973fa3635921d7080
+PKG_SOURCE_VERSION:=c1598f9dc8f2d67fbfcfd831052f40b3cde3d19c
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
 

questd/Makefile

@@ -1,14 +1,14 @@
 #
-# Copyright (C) 2013 Inteno
+# Copyright (C) 2013-2019 iopsys
 #
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=3.1.40
+PKG_VERSION:=4.0.1
 
-PKG_SOURCE_VERSION:=9edeefb6942c1a806a82274d124d8889bfb4f8e7
+PKG_SOURCE_VERSION:=d19501b6f80ef649b2ffd2f87132df885ce4581f
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
 
@@ -27,7 +27,7 @@ else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
 QUESTD_TARGET:=-DIOPSYS_MARVELL
 else ifeq ($(CONFIG_TARGET_intel_mips),y)
 # BUG FIXME the Intel mips target is not handled in questd this is just to get it to compile
-QUESTD_TARGET:=-DIOPSYS_BROADCOM
+QUESTD_TARGET:=-DIOPSYS_INTEL
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
 QUESTD_TARGET:=-DIOPSYS_MEDIATEK
 QUESTD_CFLAGS:=\

rulengd/Makefile

@@ -1,21 +1,20 @@
 #
-# Copyright (C) 2018 Inteno
+# Copyright (C) 2018 iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=rulengd
-PKG_VERSION:=1.0.0
+PKG_VERSION:=1.1.0
 PKG_RELEASE:=1
 PKG_BUILD_PARALLEL:=1
 PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/rulengd.git
-PKG_SOURCE_VERSION:=99881f39232154530ac129dc2109d78963017ad1
+PKG_SOURCE_VERSION:=63569245b62d90d3106cc826f2d2b18f51c0b885
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 

samba3/files/samba.init

@@ -72,9 +72,25 @@ hex_filter() {
 	IFS=';'
 	for i in $hex_chars;
 	do
-		local wc
-		wc=$(echo "$dump" | grep -o "$i" | wc -w)
-		wc_tot=$((wc_tot+wc))
+		local filtered
+
+		IFS=' '
+		filtered=${dump//$i/}
+
+		set -- $i
+		divider=$#
+
+		set -- $dump
+		start=$#
+
+		set -- $filtered
+		end=$#
+
+		wc=$((start-end))
+		wc=$((wc/divider))
+
+		[ $wc -eq 0 ] || wc_tot=$((wc_tot+wc))
+		IFS=';'
 	done
 
 	[ $wc_tot -gt $wc_max ] && echo "corrupt"

topologyd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2013 Inteno
+# Copyright (C) 2018 iopsys
 #
 
 include $(TOPDIR)/rules.mk

uboot/Makefile

@@ -14,7 +14,7 @@ PKG_SOURCE_PROTO:=git
 
 ifdef CONFIG_TARGET_intel_mips
 PKG_SOURCE_URL:=git@dev.iopsys.eu:intel/uboot.git
-PKG_SOURCE_VERSION:=a6292375108a6d5f200f234f5eef3fe17f427092
+PKG_SOURCE_VERSION:=0ef53f269c27f8e736fd30fd1a874159f70c76bf
 else
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/uboot.git
 PKG_SOURCE_VERSION:=3ef2ba866a99205496e0ce01935c89a1778d9b85
@@ -59,9 +59,10 @@ define uboot/grx500
   TITLE:=U-Boot for the grx
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=8
+  PKG_RELEASE:=10
 endef
 
+# obsolete: no longer supported
 define uboot/grx500_speedport_smart3
   TITLE:=U-Boot for the Speedport Smart3
   UBOOT_IMG:=u-boot-nand.bin
@@ -73,7 +74,7 @@ define uboot/grx500_norrland
   TITLE:=U-Boot for Norrland Board
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=8
+  PKG_RELEASE:=10
 endef
 
 UBOOTS := \
@@ -123,8 +124,13 @@ define Build/Compile
 		CROSS_COMPILE=$(TARGET_CROSS) env
 endef
 
+# don't install /etc/init.d/uboot for intel-mips as it's not needed
 define Package/uboot/install/default
-	$(CP) ./files/* $$(1)/
+	$(INSTALL_DIR) $$(1)/lib/upgrade
+	$(CP) ./files/uboot-upgrade $$(1)/lib/upgrade/
+	$(if $(CONFIG_TARGET_intel_mips), ,$(INSTALL_DIR) $$(1)/etc/init.d)
+	$(if $(CONFIG_TARGET_intel_mips), ,$(CP) ./files/uboot $$(1)/etc/init.d/)
+
 	$(INSTALL_DIR) $(BIN_DIR)/$(TARGET)
 	$(INSTALL_DIR) $$(1)/boot
 	$(CP) \

uboot/files/uboot

@@ -0,0 +1,8 @@
+#!/bin/sh /etc/rc.common
+
+START=50
+
+start() {
+	. /lib/upgrade/uboot-upgrade
+	uboot_upgrade /boot/uboot.img
+}

uboot/files/uboot-upgrade

@@ -1,10 +1,6 @@
-#!/bin/sh /etc/rc.common
-
-START=50
 
 . /usr/share/libubox/jshn.sh
 
-
 sanity_check_env(){
 
     # make sure iboot is used to start board, but only if verify_boot != 1
@@ -26,18 +22,24 @@ sanity_check_env(){
     fw_setenv baudrate 115200
 }
 
-uboot_upgrade(){
+do_uboot_upgrade(){
     local u_ver
     echo "doing upgrade of u-boot old version $cur_Major.$cur_Minor new version $Major.$Minor"
     mtd erase /dev/mtd0
-    mtd write /boot/uboot.img /dev/mtd0
+    mtd write $1 /dev/mtd0
     u_ver=$(strings  /dev/mtd0 | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb)
     [ -n "$u_ver" ] && fw_setenv uboot_inteno_version "$u_ver"
     sanity_check_env
 }
 
 
-start() {
+# Return:
+# 0: update is successfull
+# 1: update is not needed
+# 2: error occured
+uboot_upgrade() {
+    [ ! -f $1 ] && return 2
+
     iver=$(fw_printenv -n uboot_inteno_version 2>/dev/null)
 
     # Fixup improper json string for major and minor key.
@@ -47,8 +49,8 @@ start() {
     if [ -z "$iver" ]
     then
 	# if this variable is not set by u-boot the u-boot version is too old.
-	uboot_upgrade
-	return
+	do_uboot_upgrade $1
+	return 0
     fi
 
     # read in current version into Major Minor variables
@@ -63,7 +65,7 @@ start() {
     cur_Minor=$Minor
 
     # read in new uboot version into Major Minor variables
-    json_load $(strings /boot/uboot.img | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb |sed -e 's/938f0820-2ffb-11e7-bbc9-2f21351ee6fb: //')
+    json_load $(strings $1 | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb |sed -e 's/938f0820-2ffb-11e7-bbc9-2f21351ee6fb: //')
     json_get_vars Major Minor
 
 #    echo "Major $Major"
@@ -71,14 +73,15 @@ start() {
     
     if [ $Major -gt $cur_Major ]
     then
-	uboot_upgrade
-	return
+	do_uboot_upgrade $1
+	return 0
     fi
 
     if [ $Major -eq $cur_Major -a $Minor -gt $cur_Minor ]
     then
-	uboot_upgrade
-	return
+	do_uboot_upgrade $1
+	return 0
     fi
-}
 
+    return 1
+}

usp/Makefile

@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2019 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=uspd
+PKG_VERSION:=1.0.0
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=64f39a5041da3d6c0a45cbc901dea3bd062d96fe
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/uspd
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TR069 extention for USP
+  DEPENDS:=+libubox +ubus +icwmp-curl
+endef
+
+define Package/uspd/description
+ Ubus based backend for TR-369/USP which can be used by other USP agents
+ running on top of it.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-D_GNU_SOURCE
+
+#define Build/Prepare
+#        $(CP) -rf ./uspd/* $(PKG_BUILD_DIR)/
+#endef
+
+define Package/uspd/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/uspd.init $(1)/etc/init.d/uspd
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uspd $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,uspd))

usp/files/uspd.init

@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+
+START=94
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/uspd
+
+start_service() {
+	procd_open_instance
+	procd_set_param command ${PROG}
+	procd_set_param respawn
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}

voice-client/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2014 Inteno
+# Copyright (C) 2014 iopsys
 #
 
 include $(TOPDIR)/rules.mk
@@ -11,6 +11,19 @@ PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
 include $(INCLUDE_DIR)/package.mk
 
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+VOICE_LIB:=broadcom.sh
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+VOICE_LIB:=broadcom.sh
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+VOICE_LIB:=intel.sh
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+VOICE_LIB:=broadcom.sh
+else
+$(info (UNEXPECTED CONFIG TARGET))
+VOICE_LIB:=broadcom.sh
+endif
+
 define Package/voice-client
   SUBMENU:=Telephony
   SECTION:=net
@@ -32,7 +45,26 @@ define Build/Compile
 endef
 
 define Package/voice-client/install
-	$(CP) ./files/* $(1)/
+	$(CP) ./files/etc $(1)/
+	$(CP) ./files/sbin $(1)/
+	$(CP) ./files/usr $(1)/
+	mkdir -p $(1)/lib/voice
+	$(CP) ./files/lib/cw.sh $(1)/lib/.
+	$(CP) ./files/lib/voice/$(VOICE_LIB) $(1)/lib/voice/voicelib.sh
+
+ifeq ($(CONFIG_TARGET_intel_mips),y)
+	sed -i \
+	-e 's/brcm/tapi/g' \
+	-e 's/BRCM/TAPI/g' \
+	-e 's/broadcom/intel/g' \
+	$(1)/etc/config/voice_client \
+	$(1)/etc/asterisk_templates/*
+	sed -i \
+	-e '/echo_cancel/d' \
+	-e "/config.*tel_advanced.*TEL/a \        option 'echo_cancel' '1'" \
+	$(1)/etc/config/voice_client
+
+endif
 endef
 
 $(eval $(call BuildPackage,voice-client))

voice-client/files/etc/asterisk_templates/tel_line.TEMPLATE

@@ -6,7 +6,7 @@ autodial_timeoutmsec=|AUTODIAL_TIMEOUT|
 dialtone_timeoutmsec=|DIALTONE_TIMEOUT|
 context=|CONTEXT|
 context_direct=|CONTEXT|-direct
-dialtone_extension_hint_context=brcm_dialtone
+dialtone_extension_hint_context=|LINE_NAME|_dialtone
 dialtone_extension_hint=|DIALTONE_EXTENSION_HINT|
 callwaiting=|CALLWAITING|
 clir=|CLIR|

voice-client/files/etc/config/voice_client

@@ -1,4 +1,4 @@
-config 'brcm_line' 'brcm0'
+config 'tel_line' 'brcm0'
 	option 'extension' '0000'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -9,7 +9,7 @@ config 'brcm_line' 'brcm0'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'brcm_line' 'brcm1'
+config 'tel_line' 'brcm1'
 	option 'extension' '1111'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -20,7 +20,7 @@ config 'brcm_line' 'brcm1'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'brcm_line' 'brcm2'
+config 'tel_line' 'brcm2'
 	option 'extension' '2222'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -31,7 +31,7 @@ config 'brcm_line' 'brcm2'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'brcm_line' 'brcm3'
+config 'tel_line' 'brcm3'
 	option 'extension' '3333'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -42,7 +42,7 @@ config 'brcm_line' 'brcm3'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'brcm_line' 'brcm4'
+config 'tel_line' 'brcm4'
 	option 'extension' '4444'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -53,7 +53,7 @@ config 'brcm_line' 'brcm4'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'brcm_line' 'brcm5'
+config 'tel_line' 'brcm5'
 	option 'extension' '5555'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -64,7 +64,7 @@ config 'brcm_line' 'brcm5'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'brcm_line' 'brcm6'
+config 'tel_line' 'brcm6'
 	option 'extension' '6666'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -75,7 +75,7 @@ config 'brcm_line' 'brcm6'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'brcm_line' 'brcm7'
+config 'tel_line' 'brcm7'
 	option 'extension' '7777'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -116,7 +116,7 @@ config 'sip_advanced' 'SIP'
 	option 'dnsmgr_refresh_interval' '300'
 	option 'srvlookup' 'yes'
 
-config 'brcm_advanced' 'BRCM'
+config 'tel_advanced' 'TEL'
 	option 'country' 'SWE'
 	option 'jbenable' 'yes'
 	option 'jbforce' 'no'

voice-client/files/etc/init.d/voice_client

@@ -6,6 +6,8 @@
 #
 . /lib/functions.sh
 . /lib/functions/network.sh
+. /lib/voice/voicelib.sh
+
 HOOKS=/usr/lib/inithooks/voice_client
 if [ -f "$HOOKS" ] ; then
 	. $HOOKS
@@ -15,8 +17,8 @@ START=60
 USE_PROCD=1
 
 # Some global variables
-SERIAL=$(cat /proc/nvram/SerialNumber)
-BASEMAC=$(cat /proc/nvram/BaseMacAddr | sed 's/ //g')
+SERIAL=$(getSerial)
+BASEMAC=$(getBaseMAC)
 MODULENAME=voice
 USERAGENT="Inteno_${SERIAL}_${BASEMAC}"
 
@@ -30,8 +32,8 @@ ASTERISKDIR=/etc/asterisk
 WORKDIR=/tmp/$MODULENAME.$$
 MD5SUMSFILE=/tmp/$MODULENAME-sums.$$
 
-# Whitespace separated list of BRCM feature access codes
-BRCM_FAC=
+# Whitespace separated list of $(getChannelName) feature access codes
+CHANNEL_FAC=
 
 #TODO: go through templates, check usage
 
@@ -80,8 +82,8 @@ TMPL_ACL=$TEMPLATEDIR/acl.conf.TEMPLATE
 TMPL_CONFBRIDGE=$TEMPLATEDIR/confbridge.conf.TEMPLATE
 TMPL_UDPTL=$TEMPLATEDIR/udptl.conf.TEMPLATE
 
-TMPL_BRCM=$TEMPLATEDIR/brcm.conf.TEMPLATE
-TMPL_BRCM_LINE=$TEMPLATEDIR/brcm_line.TEMPLATE
+TMPL_CHANNEL=$TEMPLATEDIR/$(getLineName).conf.TEMPLATE
+TMPL_CHANNEL_LINE=$TEMPLATEDIR/tel_line.TEMPLATE
 
 TMPL_MEETME=$TEMPLATEDIR/meetme.conf.TEMPLATE
 
@@ -180,7 +182,7 @@ assemble_and_copy_config()
 	mv $WORKDIR/sip_registrations.tmp	$WORKDIR/sip_registrations.conf
 	mv $WORKDIR/sip_providers.tmp		$WORKDIR/sip_providers.conf
 	mv $WORKDIR/sip_users.tmp		$WORKDIR/sip_users.conf
-	mv $WORKDIR/brcm.tmp			$WORKDIR/brcm.conf
+	mv $WORKDIR/$(getLineName).tmp		$WORKDIR/$(getLineName).conf
 	mv $WORKDIR/extensions.tmp		$WORKDIR/extensions.conf
 	mv $WORKDIR/codecs.tmp			$WORKDIR/codecs.conf
 	mv $WORKDIR/rtp.tmp			$WORKDIR/rtp.conf
@@ -251,13 +253,13 @@ read_codecs_ptime()
 # in a Dial() command
 #
 # For backwards compatibility, if i is only a number (not prefixed by
-#	"SIP/" or "BRCM/") then add "BRCM/"
+#	"SIP/" or "CHANNEL/") then add "CHANNEL/"
 #
 read_lines()
 {
 	local lines=""
 	local call_lines
-	local fsxIdx fsxEpt dectIdx dectEpt
+	local fxsIdx fxsEpt dectIdx dectEpt
 
 	# Are lines already set by user conf?
 	config_get call_lines $1 call_lines
@@ -276,19 +278,19 @@ read_lines()
 		if test $(db get hw.board.hasVoice) = "1"; then
 			# Get the first FSX voice endpoint index by
 			# searching for the name usually used.
-			fsxIdx=$(echo $voiceNames | \
+			fxsIdx=$(echo $voiceNames | \
 				awk -e '{
 					i = 1;
 					while(i <= NF && tolower($i) !~ /^tel.*$/) {
 						i++;
 					}
 					print i;
-				}
-			')
+				}'
+			)
 	
 			# Convert index to endpoint ID
-			if test $fsxIdx -gt 0; then
-				fsxEpt=$(echo $voicePorts | awk '{ print $'$fsxIdx' }')
+			if test $fxsIdx -gt 0; then
+				fxsEpt=$(echo $voicePorts | awk '{ print $'$fxsIdx' }')
 			fi
 
 			hasVoice=1
@@ -315,7 +317,9 @@ read_lines()
 		fi
 
 		if test $hasVoice -eq 1; then
-			call_lines="$dectEpt $fsxEpt"
+		        call_lines="$dectEpt $fxsEpt"
+		        # Remove leading/trailing spaces
+			call_lines=$(echo $call_lines | xargs echo -n)
 
 			# If we didn't find any endpoint ID we
 			# fallback to activate them all.
@@ -333,7 +337,7 @@ read_lines()
 	for i in $call_lines ; do
 		case $i in
 			''|*[!0-9]*)	lines=$lines"$i&" ;;
-			*) 				lines=$lines"BRCM/$i&" ;;
+			*) 				lines=$lines"$(getChannelName)/$i&" ;;
 		esac
 		
 	done
@@ -1028,9 +1032,9 @@ configure_queue()
 	do
 		local out=""
 		re='^[0-9]+$'
-		num=${member#brcm}
+		num=${member#$(getLineName)}
 		if [ -z "${num##[0-9]*}" ] ; then
-			out="BRCM/$num"
+			out="$(getChannelName)/$num"
 		else
 			local sip_user
 			config_get sip_user $member user
@@ -1157,7 +1161,7 @@ configure_cdr()
 configure_call_filters()
 {
 	local country
-	config_get country BRCM country
+	config_get country TEL country
 	# Read the International Dialing Code and the Country Code from config
 
 	echo "Looking up IDC and CC for country $country"
@@ -1435,7 +1439,7 @@ configure_extensions()
 	fi
 
 	if [ -n "$extension_all_ports" ] ; then
-		local all_lines="BRCM/0&BRCM/1&BRCM/2&BRCM/3&BRCM/4&BRCM/5&BRCM/6"
+		local all_lines=$(getAllLines)
 		echo "exten => $extension_all_ports,1,Dial($all_lines,,t)"	>> $WORKDIR/extensions_local.tmp
 		echo "exten => $extension_all_ports,n,Hangup()"			>> $WORKDIR/extensions_local.tmp
 	fi
@@ -1449,7 +1453,6 @@ configure_extensions()
 		echo "exten => $test_echo_extension,1,Echo()"			>> $WORKDIR/extensions_local.tmp
 		echo "exten => $test_echo_extension,n,Hangup()"			>> $WORKDIR/extensions_local.tmp
 	fi
-
 	
 	if [ -n "$record_message_extension" ] ; then
 		echo "exten => $record_message_extension,1,Playback(beep)"		>> $WORKDIR/extensions_local.tmp
@@ -1463,7 +1466,7 @@ configure_extensions()
 		sed -i "s/|CLIR_FAC_SET|//"		$WORKDIR/extensions.tmp
 		sed -i "s/|CLIR|/$clir/"		$WORKDIR/extensions.tmp
 		sed -i "s/|CLIR_FAC_LEN|/${#clir}/"     $WORKDIR/extensions.tmp
-		BRCM_FAC="$BRCM_FAC $clir."
+		CHANNEL_FAC="$CHANNEL_FAC $clir."
 	else
 		sed -i "s/|CLIR_FAC_SET|/;/"		$WORKDIR/extensions.tmp
 	fi
@@ -1722,9 +1725,9 @@ configure_extensions_provider()
 }
 
 #
-# Create a local extension for a BRCM Line
+# Create a local extension for a CHANNEL Line
 #
-configure_brcm_line_extension()
+configure_tel_line_extension()
 {
 	local line
 	local extension
@@ -1734,8 +1737,9 @@ configure_brcm_line_extension()
 	local cbbs_retrytime
 	local cbbs_waittime
 	local mailbox
+	local line_name=$(getLineName)
 	
-	line=${1:4}
+	line=${1:${#line_name}}
 	config_get extension $1 extension
 
 	if [ -z "$line" ] ; then
@@ -1760,7 +1764,7 @@ configure_brcm_line_extension()
 	
 		cp $TMPL_EXTENSIONS_LOCAL_LINE			$WORKDIR/extensions_local_line.tmp
 		sed -i "s/|EXTEN|/$extension/g"			$WORKDIR/extensions_local_line.tmp
-		sed -i "s/|LINE|/$line/g"			$WORKDIR/extensions_local_line.tmp
+		sed -i "s/|LINE|/$(getLineIdx $line)/g"		$WORKDIR/extensions_local_line.tmp
 		sed -i "s/|TIMEOUT|/$(get_voicemail_timeout)/g"	$WORKDIR/extensions_local_line.tmp
 
 		#cbbs settings
@@ -1833,16 +1837,16 @@ configure_codecs()
 {
 	echo "Configuring codecs"
 	local genericplc
-	config_get genericplc BRCM genericplc
+	config_get genericplc TEL genericplc
 	sed -i "s/|PLC|/$genericplc/"			$WORKDIR/codecs.tmp
 }
 
 #
-# Configure default settings for brcm.conf
+# Configure default settings for $(getLineName).conf
 #
-configure_brcm()
+configure_tel()
 {
-	echo "Configuring BRCM"
+	echo "Configuring $(getChannelName)"
 	local jbenable
 	local jbforce
 	local jbmaxsize
@@ -1850,44 +1854,48 @@ configure_brcm()
 	local dtmfcompatibility
 	local dialoutmsec
 	local fac
+	local echocancel
 
-	config_get jbenable BRCM jbenable
-	config_get jbforce BRCM jbforce
-	config_get jbmaxsize BRCM jbmaxsize
-	config_get jbimpl BRCM jbimpl
+	config_get jbenable TEL jbenable
+	config_get jbforce TEL jbforce
+	config_get jbmaxsize TEL jbmaxsize
+	config_get jbimpl TEL jbimpl
 	config_get dtmfmode SIP dtmfmode
-	config_get dialoutmsec BRCM dialoutmsec
-	config_get fac BRCM fac
+	config_get dialoutmsec TEL dialoutmsec
+	config_get fac TEL fac
+	config_get echocancel TEL echo_cancel
 
-	BRCM_FAC="$BRCM_FAC $fac"
+	CHANNEL_FAC="$CHANNEL_FAC $fac"
 	# Convert whitespace to commas
-	BRCM_FAC=$(echo $BRCM_FAC | sed -e 's/^ *//' -e 's/ *$//' | tr -s ' ' | tr ' ' ',')
+	CHANNEL_FAC=$(echo $CHANNEL_FAC | sed -e 's/^ *//' -e 's/ *$//' | tr -s ' ' | tr ' ' ',')
 
 	if [ -z "$dialoutmsec" ] ; then
 		dialoutmsec=4000
 	fi
 
-	sed -i "s/|JBENABLE|/$jbenable/"			$WORKDIR/brcm.tmp
-	sed -i "s/|JBFORCE|/$jbforce/"				$WORKDIR/brcm.tmp
-	sed -i "s/|JBMAXSIZE|/$jbmaxsize/"			$WORKDIR/brcm.tmp
-	sed -i "s/|JBIMPL|/$jbimpl/"				$WORKDIR/brcm.tmp
-	sed -i "s/|DIALOUTMSEC|/$dialoutmsec/"			$WORKDIR/brcm.tmp
-	sed -i "s/|FAC|/$BRCM_FAC/"				$WORKDIR/brcm.tmp
+	sed -i "s/|JBENABLE|/$jbenable/"			$WORKDIR/$(getLineName).tmp
+	sed -i "s/|JBFORCE|/$jbforce/"				$WORKDIR/$(getLineName).tmp
+	sed -i "s/|JBMAXSIZE|/$jbmaxsize/"			$WORKDIR/$(getLineName).tmp
+	sed -i "s/|JBIMPL|/$jbimpl/"				$WORKDIR/$(getLineName).tmp
+	sed -i "s/|DIALOUTMSEC|/$dialoutmsec/"			$WORKDIR/$(getLineName).tmp
+	sed -i "s/|FAC|/$CHANNEL_FAC/"				$WORKDIR/$(getLineName).tmp
+	sed -i "s/|CHANNELS|/$(db get hw.board.VoicePorts)/"	$WORKDIR/$(getLineName).tmp
+	sed -i "s/|ECHOCANCEL|/$(getEchoCancellingValue $echocancel)/"	$WORKDIR/$(getLineName).tmp
 
 	if [ "$dtmfmode" == "compatibility" ] ; then
 		dtmfcompatibility="1"
 	else
 		dtmfcompatibility="0"
 	fi
-	sed -i "s/|DTMFCOMPATIBILITY|/$dtmfcompatibility/"      $WORKDIR/brcm.tmp
+	sed -i "s/|DTMFCOMPATIBILITY|/$dtmfcompatibility/"      $WORKDIR/$(getLineName).tmp
 }
 
 #
-# Configure settings for individual line in brcm.conf
+# Configure settings for individual line in $(getLineName).conf
 #
-configure_brcm_line()
+configure_tel_line()
 {
-	echo "Configuring BRCM line $1"
+	echo "Configuring $(getChannelName) line $1"
 	local extension
 	local sip_provider
 	local codecs
@@ -1933,30 +1941,30 @@ configure_brcm_line()
 		clir=0
 	fi
 
-	cp $TMPL_BRCM_LINE $WORKDIR/brcm_line.tmp
-	sed -i "s/|SECTION|/$1/"				$WORKDIR/brcm_line.tmp
-	sed -i "s/|CALLERID|/$extension/g"			$WORKDIR/brcm_line.tmp
-	sed -i "s/|CONTEXT|/$sip_provider/g"			$WORKDIR/brcm_line.tmp
-	sed -i "s/|DIALTONE_EXTENSION_HINT|/$1/"		$WORKDIR/brcm_line.tmp
-	sed -i "s/|AUTODIAL|/$autodial/"			$WORKDIR/brcm_line.tmp
-	sed -i "s/|AUTODIAL_TIMEOUT|/$autodial_timeout/"	$WORKDIR/brcm_line.tmp
-	sed -i "s/|DIALTONE_TIMEOUT|/$dialtone_timeout/"	$WORKDIR/brcm_line.tmp
-	sed -i "s/|DTMFRELAY|/$dtmfmode/"			$WORKDIR/brcm_line.tmp
-	sed -i "s/|CALLWAITING|/$callwaiting/"			$WORKDIR/brcm_line.tmp
-	sed -i "s/|CLIR|/$clir/"				$WORKDIR/brcm_line.tmp
+	cp $TMPL_CHANNEL_LINE $WORKDIR/tel_line.tmp
+	sed -i "s/|SECTION|/$1/"				$WORKDIR/tel_line.tmp
+	sed -i "s/|CALLERID|/$extension/g"			$WORKDIR/tel_line.tmp
+	sed -i "s/|CONTEXT|/$sip_provider/g"			$WORKDIR/tel_line.tmp
+	sed -i "s/|DIALTONE_EXTENSION_HINT|/$1/"		$WORKDIR/tel_line.tmp
+	sed -i "s/|AUTODIAL|/$autodial/"			$WORKDIR/tel_line.tmp
+	sed -i "s/|AUTODIAL_TIMEOUT|/$autodial_timeout/"	$WORKDIR/tel_line.tmp
+	sed -i "s/|DIALTONE_TIMEOUT|/$dialtone_timeout/"	$WORKDIR/tel_line.tmp
+	sed -i "s/|DTMFRELAY|/$dtmfmode/"			$WORKDIR/tel_line.tmp
+	sed -i "s/|CALLWAITING|/$callwaiting/"			$WORKDIR/tel_line.tmp
+	sed -i "s/|CLIR|/$clir/"				$WORKDIR/tel_line.tmp
+	sed -i "s/|LINE_NAME|/$(getLineName)/"			$WORKDIR/tel_line.tmp
 
-
-	#Configure BRCM line with codecs according to the SIP line settings
+	#Configure CHANNEL line with codecs according to the SIP line settings
 #	local is_fax
 #	config_get is_fax $sip_provider is_fax
 # 	if [ -z "$is_fax" -o "$is_fax" = "1" ] ; then
-# 		sed -i "s/|ALLOW|/allow = ulaw\nallow = alaw/"	$WORKDIR/brcm_line.tmp
+# 		sed -i "s/|ALLOW|/allow = ulaw\nallow = alaw/"	$WORKDIR/tel_line.tmp
 # 	else
-# 		sed -i "s/|ALLOW|/$(read_codecs $sip_provider)/"	$WORKDIR/brcm_line.tmp
+# 		sed -i "s/|ALLOW|/$(read_codecs $sip_provider)/"	$WORKDIR/tel_line.tmp
 # 	fi
 
-	cat $WORKDIR/brcm_line.tmp >>				$WORKDIR/brcm.tmp
-	rm -f							$WORKDIR/brcm_line.tmp
+	cat $WORKDIR/tel_line.tmp >>				$WORKDIR/$(getLineName).tmp
+	rm -f							$WORKDIR/tel_line.tmp
 }
 
 #
@@ -2055,30 +2063,35 @@ pbx_fix_ownership()
 }
 
 #
-# Calculate a name for each brcm line, depending on port type
+# Calculate a name for each $(getLineName) line, depending on port type
 # and number. The name is used to make UI look better.
 #
 set_line_name()
 {
 	local maxlinenum=$2
 	local curname name_ix ix item lnum
+	local line_name=$(getLineName)
+	local line_name_len=${#line_name}
+	local tel_line=$1
+	
+	line=${tel_line:${line_name_len}}
 
 	# delete non-existing lines from config #
-	case $1 in
-		brcm[0-9])
-			lnum=${1:4:1}
-			[ $((lnum+1)) -gt $maxlinenum ] && uci -q delete voice_client.$1
+	case $tel_line in
+		${line_name}[0-9])
+			lnum=${tel_line:${line_name_len}:1}
+			[ $((lnum+1)) -gt $maxlinenum ] && uci -q delete voice_client.$tel_line
 		;;
 	esac
 	#########################################
 
-	config_get curname $1 name
+	config_get curname $tel_line name
 	[ -n "$curname" ] && return
 
 	name_ix=""
 	ix=0
 	for item in $(db get hw.board.VoicePortOrder); do
-		if [ "$item" == "$1" ]; then
+		if [ "$item" == "$tel_line" ]; then
 			name_ix=$ix
 			break
 		fi
@@ -2089,15 +2102,14 @@ set_line_name()
 	if [ -n "$name_ix" ]; then
 		for item in $(db get hw.board.VoicePortNames); do
 			if [ $ix -eq $name_ix ]; then
-				uci_set voice_client $1 name \
-					"$(echo "$item" |tr "[_]" "[ ]")"
+				uci_set voice_client $tel_line name "$(echo $item | tr '[_]' '[ ]')"
 				return
 			fi
 			ix=$((ix+1))
 		done
 	fi
 
-	uci_set voice_client $1 name $1
+	uci_set voice_client $tel_line name $tel_line
 }
 
 #
@@ -2147,11 +2159,11 @@ start_service() {
 	config_load voice_client
 
 	########################################################
-	# Set line names according to whats reported by brcminfo
+	# Set line names according to board parameters
 	# and delete non-existing lines from voice_client config
 	########################################################
 	local maxlinenum=$(db get hw.board.VoicePorts)
-	config_foreach set_line_name brcm_line $maxlinenum
+	config_foreach set_line_name tel_line $maxlinenum
 	uci_commit voice_client
 
 	#######################################
@@ -2164,7 +2176,7 @@ start_service() {
 	cp $TMPL_SIP			$WORKDIR/sip.tmp
 	cp $TMPL_RTP			$WORKDIR/rtp.tmp
 	cp $TMPL_STUN			$WORKDIR/res_stun_monitor.tmp
-	cp $TMPL_BRCM			$WORKDIR/brcm.tmp
+	cp $TMPL_CHANNEL		$WORKDIR/$(getLineName).tmp
 	cp $TMPL_CODECS			$WORKDIR/codecs.tmp
 	cp $TMPL_VOICEMAIL		$WORKDIR/voicemail.tmp
 	cp $TMPL_DNSMGR			$WORKDIR/dnsmgr.tmp
@@ -2208,12 +2220,12 @@ start_service() {
 	config_foreach configure_sip_user_extension sip_user
 
 	#####################
-	# BRCM configuration
+	# CHANNEL configuration
 	#####################
-	configure_brcm
-	config_foreach configure_brcm_line brcm_line
-	config_foreach configure_brcm_line_extension brcm_line
-	config_foreach create_extensions_dialtone brcm_line
+	configure_tel
+	config_foreach configure_tel_line tel_line
+	config_foreach configure_tel_line_extension tel_line
+	config_foreach create_extensions_dialtone tel_line
 	configure_codecs
 
 	###########################
@@ -2278,14 +2290,17 @@ stop_service() {
 }
 
 reload_service() {
-	#stop
 	start
+	#stop
+	# turn off voice led; asterisk will turn it on
+	# if there is a registered account
+	ubus call led.voice1 set '{"state":"off"}'
 
 	asterisk -rx "config reload $ASTERISKDIR/sip.conf"
 	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
-	asterisk -rx "brcm reload"
+	asterisk -rx "$(getChipVendor) reload"
 }
 
 service_triggers() {

voice-client/files/etc/uci-defaults/99-voice_client

@@ -1,5 +1,12 @@
 #!/bin/sh
 
+. /lib/voice/voicelib.sh
+
+# Adapt to config section name changes
+grep -q brcm_line /etc/config/voice_client && sed -i 's/brcm_line/tel_line/g' /etc/config/voice_client
+grep -q brcm_advanced /etc/config/voice_client && sed -i 's/brcm_advanced/tel_advanced/g' /etc/config/voice_client
+
+# Add call filter section
 uci -q get voice_client.call_filter0 >/dev/null || {
 
 uci -q batch <<-EOT
@@ -14,6 +21,7 @@ EOT
 
 }
 
+# Add ringing schedule section
 uci -q get voice_client.RINGING_STATUS >/dev/null || {
 
 uci -q batch <<-EOT
@@ -27,27 +35,28 @@ EOT
 
 }
 
-# Default Broadcom phone volume for Iopsys 4.
+# Default phone volume for iopsysWrt 4.X.
 uci -q batch <<-EOT
-	set voice_client.brcm0.txgain=4
-	set voice_client.brcm0.rxgain=4
-	set voice_client.brcm1.txgain=4
-	set voice_client.brcm1.rxgain=4
-	set voice_client.brcm2.txgain=4
-	set voice_client.brcm2.rxgain=4
-	set voice_client.brcm3.txgain=4
-	set voice_client.brcm3.rxgain=4
-	set voice_client.brcm4.txgain=4
-	set voice_client.brcm4.rxgain=4
-	set voice_client.brcm5.txgain=4
-	set voice_client.brcm5.rxgain=4
-	set voice_client.brcm6.txgain=4
-	set voice_client.brcm6.rxgain=4
-	set voice_client.brcm7.txgain=4
-	set voice_client.brcm7.rxgain=4
+	set voice_client.$(getLineName)0.txgain=4
+	set voice_client.$(getLineName)0.rxgain=4
+	set voice_client.$(getLineName)1.txgain=4
+	set voice_client.$(getLineName)1.rxgain=4
+	set voice_client.$(getLineName)2.txgain=4
+	set voice_client.$(getLineName)2.rxgain=4
+	set voice_client.$(getLineName)3.txgain=4
+	set voice_client.$(getLineName)3.rxgain=4
+	set voice_client.$(getLineName)4.txgain=4
+	set voice_client.$(getLineName)4.rxgain=4
+	set voice_client.$(getLineName)5.txgain=4
+	set voice_client.$(getLineName)5.rxgain=4
+	set voice_client.$(getLineName)6.txgain=4
+	set voice_client.$(getLineName)6.rxgain=4
+	set voice_client.$(getLineName)7.txgain=4
+	set voice_client.$(getLineName)7.rxgain=4
 	commit voice_client
 EOT
 
+# Add firewall include
 uci -q batch <<-EOT
         delete firewall.sip
         set firewall.sip=include

voice-client/files/lib/cw.sh

@@ -1,12 +1,14 @@
 #! /bin/sh
 
+. /lib/voice/voicelib.sh
+
 if [ $2 != '?' ]; then
-    for brcm in `uci show voice_client | grep brcm | grep $1 | cut -d . -f 2`; do
-	sed -i "/\[$brcm\]/,/^\[/ s/\(callwaiting=\)[0-9]/\1$2/" /etc/asterisk/brcm.conf
+    for tel_line in `uci show voice_client | grep $(getLineName) | grep $1 | cut -d . -f 2`; do
+	sed -i "/\[$tel_line\]/,/^\[/ s/\(callwaiting=\)[0-9]/\1$2/" /etc/asterisk/$(getLineName).conf
     done
 else
-    for brcm in `uci show voice_client | grep brcm | grep $1 | cut -d . -f 2`; do
-	status=`sed -n "/\[$brcm\]/,/^\[/ s/callwaiting=\([0-9]\)/\1/p" /etc/asterisk/brcm.conf`
+    for tel_line in `uci show voice_client | grep $(getLineName) | grep $1 | cut -d . -f 2`; do
+	status=`sed -n "/\[$tel_line\]/,/^\[/ s/callwaiting=\([0-9]\)/\1/p" /etc/asterisk/$(getLineName).conf`
 	echo $status
 	exit 0
     done

voice-client/files/lib/voice/broadcom.sh

@@ -0,0 +1,45 @@
+#! /bin/sh
+# Voice library for Broadcom boards
+
+getChipVendor() {
+    echo brcm
+}
+
+getChannelName() {
+    echo BRCM
+}
+
+getLineName() {
+    echo brcm
+}
+
+getSerial() {
+    echo $(cat /proc/nvram/SerialNumber)
+}
+
+getBaseMAC() {
+    echo $(cat /proc/nvram/BaseMacAddr | sed 's/ //g')
+}
+
+getAllLines() {
+    echo "BRCM/0&BRCM/1&BRCM/2&BRCM/3&BRCM/4&BRCM/5&BRCM/6"
+}
+
+getLineIdx() {
+    echo $1
+}
+
+getEchoCancellingValue() {
+    case $1 in
+	0)
+	    echo '0'
+	    ;;
+	1)
+	    echo '1'
+	    ;;
+	*)
+	    # Unknown value
+	    echo ''
+	    ;;
+    esac
+}

voice-client/files/lib/voice/intel.sh

@@ -0,0 +1,52 @@
+#! /bin/sh
+# Voice library for Intel boards
+
+getChipVendor() {
+    echo intel
+}
+
+getChannelName() {
+    echo TAPI
+}
+
+getLineName() {
+    echo tapi
+}
+
+getSerial() {
+    sernum=$(fw_printenv -n serial_number) 2> /dev/null
+
+    if [ $? ]; then
+	echo 0
+    else
+	echo $sernum
+    fi
+}
+
+getBaseMAC() {
+    echo $(fw_printenv -n ethaddr)
+}
+
+getAllLines() {
+    echo "TAPI/1&TAPI/2&TAPI/3&TAPI/4&TAPI/5&TAPI/6"
+}
+
+getLineIdx() {
+    i=$1
+    echo $((i+1))
+}
+
+getEchoCancellingValue() {
+    case $1 in
+	0)
+	    echo 'off'
+	    ;;
+	1)
+	    echo 'nlec'
+	    ;;
+	*)
+	    # Unknown value
+	    echo ''
+	    ;;
+    esac
+}

voice-client/files/usr/lib/asterisk/cbbs.sh

@@ -23,6 +23,8 @@
 # ./cbbs.sh BRCM 0 4444 BRCM/4 5 300 45
 #####################################################
 
+. /lib/voice/voicelib.sh
+
 #Create temporary file
 tempfile=$(mktemp)
 
@@ -31,7 +33,7 @@ echo "Channel: $1/$2/$3" >> $tempfile
 echo "MaxRetries: $5" >> $tempfile
 echo "RetryTime: $6" >> $tempfile
 echo "WaitTime: $7" >> $tempfile
-echo "Set: BRCMLINE=$4" >> $tempfile
+echo "Set: $(getChannelName)LINE=$4" >> $tempfile
 
 #On answer
 echo "Context: cbbs" >> $tempfile

voice-client/files/usr/libexec/rpcd/voice.asterisk

@@ -1,10 +1,11 @@
 #!/bin/sh
 
 . /usr/share/libubox/jshn.sh
+. /lib/voice/voicelib.sh
 
 case "$1" in
 	list)
-		echo '{ "status" : {}, "lines" : {}, "codecs" : {}, "call_log" : {} }'
+		echo '{ "status" : {}, "lines" : {}, "codecs" : {}, "call_log" : {}, "platform" : {} }'
 
 	;;
 	call)
@@ -48,8 +49,8 @@ case "$1" in
                                 done
 				json_select ..
 
-				json_add_object "brcm"
-				for line in $(uci show voice_client | grep brcm_line | awk -F[.,=] '{print$2}'); do
+				json_add_object "tel"
+				for line in $(uci show voice_client | grep tel_line | awk -F[.,=] '{print$2}'); do
 					json_add_object "$line"
 					linestate="ONHOOK"
 					linenum=${line:4}
@@ -66,7 +67,7 @@ case "$1" in
 
 			;;
 			lines)
-				subchannels=$(asterisk -x 'brcm show status' 2>/dev/null | grep Subchannel | sort -u | wc -l)
+				subchannels=$(asterisk -x "$(getChipVendor) show status" 2>/dev/null | grep Subchannel | sort -u | wc -l)
 				[ $subchannels -eq 0 ] && subchannels=2
                                 json_init
                                 json_add_int num_subchannels $subchannels
@@ -125,6 +126,26 @@ case "$1" in
                                 done < /var/log/asterisk/cdr-csv/Master.csv
 				json_dump
 			;;
+			platform)
+                                json_init
+                                json_add_string platform "$(getLineName)"
+
+				case $(getLineName) in
+				    "brcm")
+					    json_add_int lineoffset 0
+					    json_add_int chanoffset 0
+				    ;;
+				    "tapi")
+					    json_add_int lineoffset 1
+					    json_add_int chanoffset -1
+				    ;;
+			        *)
+				    # Error, unknown platform
+				    ;;
+				esac
+				
+				json_dump
+			;;
 		esac
 	;;
 esac

wifilife/Makefile

@@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=wifilife
 PKG_VERSION:=1.0.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=6971890314a06200f60d4c949d9b9654029b9fc3
+PKG_SOURCE_VERSION:=de6183cda406fbd1a98779bda2ea1b2ffb8f2e04
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 ifeq ($(CONFIG_WIFILIFE_OPEN),y)

wifilife/files/wifilife.init

@@ -9,8 +9,6 @@ EXTRA_COMMANDS="enable_check"
 
 
 start_service() {
-	[ "$(uci -q get wifilife.@wifilife[0].enabled)" == "0" ] && return
-
 	procd_open_instance
 	procd_set_param command ${PROG} -d -l -f -o /tmp/wifiagent.log
 	procd_set_param respawn

wifimngr/Makefile

@@ -8,7 +8,7 @@ PKG_NAME:=wifimngr
 PKG_VERSION:=1.0.2
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=c7228ea031f407580ff8e4801e0ba544aeadd050
+PKG_SOURCE_VERSION:=66a7e957f5e3e83ab60da68f7fb05cdda7f474d5
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>